Concurrent calls to LocalBackend.setWgengineStatus
could result in some of the status updates being dropped.
This was exacerbated by 92077ae78c,
which increases the probability of concurrent status updates,
causing test failures (tailscale/corp#2579).
It's going to take a bit of work to fix this test.
The ipnlocal state machine is difficult to reason about,
particularly in the face of concurrency.
We could fix the test trivially by throwing a new mutex around
setWgengineStatus to serialize calls to it,
but I'd like to at least try to do better than cosmetics.
In the meantime, commit the test.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Spelling out the command to run for every type
means that changing the command makes for a large, repetitive diff.
Stop doing that.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
In prep for other bug fixes & tests. It's hard to test when it was
intermingled into LocalBackend.authReconfig.
Now it's a pure function.
And rename variable 'uc' (user config?) to the since idiomatic
'prefs'.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We currently plumb full URLs for DNS resolvers from the control server
down to the client. But when we pass the values into the net/dns
package, we throw away any URL that isn't a bare IP. This commit
continues the plumbing, and gets the URL all the way to the built in
forwarder. (It stops before plumbing URLs into the OS configurations
that can handle them.)
For #2596
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
And in the process, fix the related confusing error messages from
pinging your own IP or hostname.
Fixes#2803
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* Revert "Revert "types/key: add MachinePrivate and MachinePublic.""
This reverts commit 61c3b98a24.
Signed-off-by: David Anderson <danderson@tailscale.com>
* types/key: add ControlPrivate, with custom serialization.
ControlPrivate is just a MachinePrivate that serializes differently
in JSON, to be compatible with how the Tailscale control plane
historically serialized its private key.
Signed-off-by: David Anderson <danderson@tailscale.com>
Plumb throughout the codebase as a replacement for the mixed use of
tailcfg.MachineKey and wgkey.Private/Public.
Signed-off-by: David Anderson <danderson@tailscale.com>
And add health check errors to ipnstate.Status (tailscale status --json).
Updates #2746
Updates #2775
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The number of packet filters can grow very large,
so this log entry can be very large.
We can get the packet filter server-side,
so reduce verbosity here to just the number of filters present.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Now that we have the easier-to-parse go:build build tags,
it is straightforward to simplify them. Yay.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
magicsock makes multiple calls to Now per packet.
Move to mono.Now. Changing some of the calls to
use package mono has a cascading effect,
causing non-per-packet call sites to also switch.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The fact that Hash returns a [sha256.Size]byte leaks details about
the underlying hash implementation. This could very well be any other
hashing algorithm with a possible different block size.
Abstract this implementation detail away by declaring an opaque type
that is comparable. While we are changing the signature of UpdateHash,
rename it to just Update to reduce stutter (e.g., deephash.Update).
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
With this, I can now:
* install Tailscale
* stop the GUI
* net stop Tailscale
* net start Tailscale
* tailscale up --unattended
(where the middle three steps simulate what would happen on a Windows
Server Core machine without a GUI)
Fixes#2137
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The localapi was double-unescaping: once by net/http populating
the URL, and once by ourselves later. We need to start with the raw
escaped URL if we're doing it ourselves.
Started to write a test but it got invasive. Will have to add those
tests later in a commit that's not being cherry-picked to a release
branch.
Fixes#2288
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Regression from 6d10655dc3, which added
UpdatePrefs but didn't write it out to disk.
I'd planned on adding tests to state_test.go which is why I'd earlier
added 46896a9311 to prepare for making
such persistence tests easier to write, but turns out state_test.go
didn't even test UpdatePrefs, so I'm staying out of there.
Instead, this is tested using integration tests.
Fixes#2321
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We can't access b.netMap without holding b.mu.
We already grabbed it earlier in the function with the lock held.
Introduced in Nov 2020 in 7ea809897d.
Discovered during stress testing.
Apparently it's a pretty rare?
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
After allowing for custom DERP maps, it's convenient to be able to see their latency in
netcheck. This adds a query to the local tailscaled for the current DERPMap.
Updates #1264
Signed-off-by: julianknodt <julianknodt@gmail.com>
We were crashing on in initPeerAPIListener when called from
authReconfig when b.netMap is nil. But authReconfig already returns
before the call to initPeerAPIListener when b.netMap is nil, but it
releases the b.mu mutex before calling initPeerAPIListener which
reacquires it and assumes it's still nil.
The only thing that can be setting it to nil is setNetMapLocked, which
is called by ResetForClientDisconnect, Logout/logout, or Start, all of
which can happen during an authReconfig.
So be more defensive.
Fixes#1996
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We used to use "redo" for that, but it was pretty vague.
Also, fix the build tags broken in interfaces_default_route_test.go from
a9745a0b68, moving those Linux-specific
tests to interfaces_linux_test.go.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The resulting empty Prefs had AllowSingleHosts=false and
Routeall=false, so that on iOS if you did these steps:
- Login and leave running
- Terminate the frontend
- Restart the frontend (fast path restart, missing prefs)
- Set WantRunning=false
- Set WantRunning=true
...then you would have Tailscale running, but with no routes. You would
also accidentally disable the ExitNodeID/IP prefs (symptom: the current
exit node setting didn't appear in the UI), but since nothing
else worked either, you probably didn't notice.
The fix was easy enough. It turns out we already knew about the
problem, so this also fixes one of the BUG entries in state_test.
Fixes: #1918 (BUG-1) and some as-yet-unreported bugs with exit nodes.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Previously, there was no server round trip required to log out, so when
you asked ipnlocal to Logout(), it could clear the netmap immediately
and switch to NeedsLogin state.
In v1.8, we added a true Logout operation. ipn.Logout() would trigger
an async cc.StartLogout() and *also* immediately switch to NeedsLogin.
Unfortunately, some frontends would see NeedsLogin and immediately
trigger a new StartInteractiveLogin() operation, before the
controlclient auth state machine actually acted on the Logout command,
thus accidentally invalidating the entire logout operation, retaining
the netmap, and violating the user's expectations.
Instead, add a new LogoutFinished signal from controlclient
(paralleling LoginFinished) and, upon starting a logout, don't update
the ipn state machine until it's received.
Updates: #1918 (BUG-2)
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
On clean installs we didn't set use iptables, but during upgrades it
looks like we could use old prefs that directed us to go into the iptables
paths that might fail on Synology.
Updates #1995Fixestailscale/tailscale-synology#57 (I think)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A couple of code paths in ipnserver use a NewBackendServer with a nil
backend just to call the callback with an encapsulated error message.
This covers a panic case seen in logs.
For #1920
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
This leads to a cleaner separation of intent vs. implementation
(Routes is now the only place specifying who handles DNS requests),
and allows for cleaner expression of a configuration that creates
MagicDNS records without serving them to the OS.
Signed-off-by: David Anderson <danderson@tailscale.com>
This code path is very tricky since it was originally designed for the
"re-authenticate to refresh my keys" use case, which didn't want to
lose the original session even if the refresh cycle failed. This is why
it acts differently from the Logout(); Login(); case.
Maybe that's too fancy, considering that it probably never quite worked
at all, for switching between users without logging out first. But it
works now.
This was more invasive than I hoped, but the necessary fixes actually
removed several other suspicious BUG: lines from state_test.go, so I'm
pretty confident this is a significant net improvement.
Fixestailscale/corp#1756.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
If the engine was shutting down from a previous session
(e.closing=true), it would return an error code when trying to get
status. In that case, ipnlocal would never unblock any callers that
were waiting on the status.
Not sure if this ever happened in real life, but I accidentally
triggered it while writing a test.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Yes, it printed, but that was an implementation detail for hashing.
And coming optimization will make it print even less.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If nobody is connected to the IPN bus, don't burn CPU & waste
allocations (causing more GC) by encoding netmaps for nobody.
This will notably help hello.ipn.dev.
Updates tailscale/corp#1773
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Needed for the "up checker" to map back from exit node stable IDs (the
ipn.Prefs.ExitNodeID) back to an IP address in error messages.
But also previously requested so people can use it to then make API
calls. The upcoming "tailscale admin" subcommand will probably need it
too.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is needed because the original opts.Prefs field was at some point
subverted for use in frontend->backend state migration for backward
compatibility on some platforms. We still need that feature, but we
also need the feature of providing the full set of prefs from
`tailscale up`, *not* including overwriting the prefs.Persist keys, so
we can't use the original field from `tailscale up`.
`tailscale up` had attempted to compensate for that by doing SetPrefs()
before Start(), but that violates the ipn.Backend contract, which says
you should call Start() before anything else (that's why it's called
Start()). As a result, doing SetPrefs({ControlURL=...,
WantRunning=true}) would cause a connection to the *previous* control
server (because WantRunning=true), and then connect to the *new*
control server only after running Start().
This problem may have been avoided before, but only by pure luck.
It turned out to be relatively harmless since the connection to the old
control server was immediately closed and replaced anyway, but it
created a race condition that could have caused spurious notifications
or rejected keys if the server responded quickly.
As already covered by existing TODOs, a better fix would be to have
Start() get out of the business of state migration altogether. But
we're approaching a release so I want to make the minimum possible fix.
Fixes#1840.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Per discussion, we want to have only one test assertion library,
and we want to start by exploring quicktest.
This was a mostly mechanical translation.
I think we could make this nicer by defining a few helper
closures at the beginning of the test. Later.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
This removes the NewLocalBackendWithClientGen constructor added in
b4d04a065f and instead adds
LocalBackend.SetControlClientGetterForTesting, mirroring
LocalBackend.SetHTTPTestClient. NewLocalBackendWithClientGen was
weird in being exported but taking an unexported type. This was noted
during code review:
https://github.com/tailscale/tailscale/pull/1818#discussion_r623155669
which ended in:
"I'll leave it for y'all to clean up if you find some way to do it elegantly."
This is more idiomatic.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Without this, macOS would fail to display its menu state correctly if you
started it while !WantRunning. It relies on the netmap in order to show
the logged-in username.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
There was logic that would make a "down" tailscale backend (ie.
!WantRunning) refuse to do any network activity. Unfortunately, this
makes the macOS and iOS UI unable to render correctly if they start
while !WantRunning.
Now that we have Prefs.LoggedOut, use that instead. So `tailscale down`
will still allow the controlclient to connect its authroutine, but
pause the maproutine. `tailscale logout` will entirely stop all
activity.
This new behaviour is not obviously correct; it's a bit annoying that
`tailsale down` doesn't terminate all activity like you might expect.
Maybe we should redesign the UI code to render differently when
disconnected, and then revert this change.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
EditPrefs should be just a wrapper around the action of changing prefs,
but someone had added a side effect of calling Login() sometimes. The
side effect happened *after* running the state machine, which would
sometimes result in us going into NeedsLogin immediately before calling
cc.Login().
This manifested as the macOS app not being able to Connect if you
launched it with LoggedOut=false and WantRunning=false. Trying to
Connect() would sent us to the NeedsLogin state instead.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
A very long unit test that verifies the way the controlclient and
ipn.Backend interact.
This is a giant sequential test of the state machine. The test passes,
but only because it's asserting all the wrong behaviour. I marked all
the behaviour I think is wrong with BUG comments, and several
additional test opportunities with TODO.
Note: the new test supercedes TestStartsInNeedsLoginState, which was
checking for incorrect behaviour (although the new test still checks
for the same incorrect behaviour) and assumed .Start() would converge
before returning, which it happens to do, but only for this very
specific case, for the current implementation. You're supposed to wait
for the notifications.
Updates: tailscale/corp#1660
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
With this change, shared node names resolve correctly on split DNS-supporting
operating systems.
Fixestailscale/corp#1706
Signed-off-by: David Anderson <danderson@tailscale.com>
The intention was always that files only get written to *.partial
files and renamed at the end once fully received, but somewhere in the
process that got lost in buffered mode and *.partial files were only
being used in direct receive mode. This fix prevents WaitingFiles
from returning files that are still being transferred.
Updates tailscale/corp#1626
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If DeleteFile fails on Windows due to another process (anti-virus,
probably) having our file open, instead leave a marker file that the
file is logically deleted, and remove it from API calls and clean it
up lazily later.
Updates tailscale/corp#1626
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was getting cleared on notify.
Document that authURL is cleared on notify and add a new field that
isn't, using the new field for the JSON status.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
With this change, the ipnserver's safesocket.Listen (the localhost
tcp.Listen) happens right away, before any synchronous
TUN/DNS/Engine/etc setup work, which might be slow, especially on
early boot on Windows.
Because the safesocket.Listen starts up early, that means localhost
TCP dials (the safesocket.Connect from the GUI) complete successfully
and thus the GUI avoids the MessageBox error. (I verified that
pacifies it, even without a Listener.Accept; I'd feared that Windows
localhost was maybe special and avoided the normal listener backlog).
Once the GUI can then connect immediately without errors, the various
timeouts then matter less, because the backend is no longer trying to
race against the GUI's timeout. So keep retrying on errors for a
minute, or 10 minutes if the system just booted in the past 10
minutes.
This should fix the problem with Windows 10 desktops auto-logging in
and starting the Tailscale frontend which was then showing a
MessageBox error about failing to connect to tailscaled, which was
slow coming up because the Windows networking stack wasn't up
yet. Fingers crossed.
Fixes#1313 (previously #1187, etc)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This used to not be necessary, because MagicDNS always did full proxying.
But with split DNS, we need to know which names to route to our resolver,
otherwise reverse lookups break.
This captures the entire CGNAT range, as well as our Tailscale ULA.
Signed-off-by: David Anderson <danderson@tailscale.com>
Otherwise, the existence of authoritative domains forces full
DNS proxying even when no other DNS config is present.
Signed-off-by: David Anderson <danderson@tailscale.com>
Logout used to be a no-op, so the ipnserver previously synthensized a Logout
on disconnect. Now that Logout actually invalidates the node key that was
forcing all GUI closes to log people out.
Instead, add a method to LocalBackend to specifically mean "the
Windows GUI closed, please forget all the state".
Fixestailscale/corp#1591 (ignoring the notification issues, tracked elsewhere)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Let caller (macOS) do it so Finder progress bar can be dismissed
without races.
Updates tailscale/corp#1575
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It used to just store received files URL-escaped on disk, but that was
a half done lazy implementation, and pushed the burden to callers to
validate and write things to disk in an unescaped way.
Instead, do all the validation in the receive handler and only
accept filenames that are UTF-8 and in the intersection of valid
names that all platforms support.
Fixestailscale/corp#1594
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The ipn.NewPrefs func returns a populated ipn.Prefs for historical
reasons. It's not used or as important as it once was, but it hasn't
yet been removed. Meanwhile, it contains some default values that are
used on some platforms. Notably, for this bug (#1725), Windows/Mac use
its Prefs.RouteAll true value (to accept subnets), but Linux users
have always gotten a "false" value for that, because that's what
cmd/tailscale's CLI default flag is _for all operating systems_. That
meant that "tailscale up" was rightfully reporting that the user was
changing an implicit setting: RouteAll was changing from true with
false with the user explicitly saying so.
An obvious fix might be to change ipn.NewPrefs to return
Prefs.RouteAll == false on some platforms, but the logic is
complicated by darwin: we want RouteAll true on windows, android, ios,
and the GUI mac app, but not the CLI tailscaled-on-macOS mode. But
even if we used build tags (e.g. the "redo" build tag) to determine
what the default is, that then means we have duplicated and differing
"defaults" between both the CLI up flags and ipn.NewPrefs. Furthering
that complication didn't seem like a good idea.
So, changing the NewPrefs defaults is too invasive at this stage of
the release, as is removing the NewPrefs func entirely.
Instead, tweak slightly the semantics of the ipn.Prefs.ControlURL
field. This now defines that a ControlURL of the empty string means
both "we're uninitialized" and also "just use the default".
Then, once we have the "empty-string-means-unintialized" semantics,
use that to suppress "tailscale up"'s recent implicit-setting-revert
checking safety net, if we've never initialized Tailscale yet.
And update/add tests.
Fixes#1725
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Track endpoints internally with a new tailcfg.Endpoint type that
includes a typed netaddr.IPPort (instead of just a string) and
includes a type for how that endpoint was discovered (STUN, local,
etc).
Use []tailcfg.Endpoint instead of []string internally.
At the last second, send it to the control server as the existing
[]string for endpoints, but also include a new parallel
MapRequest.EndpointType []tailcfg.EndpointType, so the control server
can start filtering out less-important endpoint changes from
new-enough clients. Notably, STUN-discovered endpoints can be filtered
out from 1.6+ clients, as they can discover them amongst each other
via CallMeMaybe disco exchanges started over DERP. And STUN endpoints
change a lot, causing a lot of MapResposne updates. But portmapped
endpoints are worth keeping for now, as they they work right away
without requiring the firewall traversal extra RTT dance.
End result will be less control->client bandwidth. (despite negligible
increase in client->control bandwidth)
Updates tailscale/corp#1543
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
They were scattered/duplicated in misc places before.
It can't be in the client package itself for circular dep reasons.
This new package is basically tailcfg but for localhost
communications, instead of to control.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This changes the behavior of "tailscale up".
Previously "tailscale up" always did a new Start and reset all the settings.
Now "tailscale up" with no flags just brings the world [back] up.
(The opposite of "tailscale down").
But with flags, "tailscale up" now only is allowed to change
preferences if they're explicitly named in the flags. Otherwise it's
an error. Or you need to use --reset to explicitly nuke everything.
RELNOTE=tailscale up change
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some paths already didn't. And in the future I hope to shut all the
notify funcs down end-to-end when nothing is connected (as in the
common case in tailscaled). Then we can save some JSON encoding work.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We've been slowly making Start less special and making IPN a
multi-connection "watch" bus of changes, but this Start specialness
had remained.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
With this change, all OSes can sort-of do split DNS, except that the
default upstream is hardcoded to 8.8.8.8 pending further plumbing.
Additionally, Windows 8-10 can do split DNS fully correctly, without
the 8.8.8.8 hack.
Part of #953.
Signed-off-by: David Anderson <danderson@tailscale.com>
We already had SetNotifyCallback elsewhere on controlclient, so use
that name.
Baby steps towards some CLI refactor work.
Updates tailscale/tailscale#1436
The common Linux start-up path (fallback file defined but not
existing) was missing the log print of initializing Prefs. The code
was too twisty. Simplify a bit.
Updates #1573
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's currently unused, and no longer makes sense with the upcoming
DNS infrastructure. Keep it in tailcfg for now, since we need protocol
compat for a bit longer.
Signed-off-by: David Anderson <danderson@tailscale.com>
The resolver still only supports a single upstream config, and
ipn/wgengine still have to split up the DNS config, but this moves
closer to unifying the DNS configs.
As a handy side-effect of the refactor, IPv6 MagicDNS records exist
now.
Signed-off-by: David Anderson <danderson@tailscale.com>
This adds a new ipn.MaskedPrefs embedding a ipn.Prefs, along with a
bunch of "has bits", kept in sync with tests & reflect.
Then it adds a Prefs.ApplyEdits(MaskedPrefs) method.
Then the ipn.Backend interface loses its weirdo SetWantRunning(bool)
method (that I added in 483141094c for "tailscale down")
and replaces it with EditPrefs (alongside the existing SetPrefs for now).
Then updates 'tailscale down' to use EditPrefs instead of SetWantRunning.
In the future, we can use this to do more interesting things with the
CLI, reconfiguring only certain properties without the reset-the-world
"tailscale up".
Updates #1436
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were going to remove this in Tailscale 1.3 but forgot.
This means Tailscale 1.8 users won't be able to downgrade to Tailscale
1.0, but that's fine.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adding a subcommand which prints and logs a log marker. This should help
diagnose any issues that users face.
Fixes#1466
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Instead of having the CLI check whether IP forwarding is enabled, ask
tailscaled. It has a better idea. If it's netstack, for instance, the
sysctl values don't matter. And it's possible that only the daemon has
permission to know.
Fixes#1626
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For discovery when an explicit hostname/IP is known. We'll still
also send it via control for finding peers by a list.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
IPv4 and IPv6 both work remotely, but IPv6 doesn't yet work from the
machine itself due to routing mysteries.
Untested yet on iOS, but previous prototype worked on iOS, so should
work the same.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
"public IP" is defined as an IP address configured on the exit node
itself that isn't in the list of forbidden ranges (RFC1918, CGNAT,
Tailscale).
Fixes#1522.
Signed-off-by: David Anderson <danderson@tailscale.com>
Windows was only running the localapi on the debug port which was a
stopgap at the time while doing peercreds work. Removed that, and
wired it up correctly, with some more docs.
More clean-up to do after 1.6, moving the localhost TCP auth code into
the peercreds package. But that's too much for now, so the docs will
have to suffice, even if it's at a bit of an awkward stage with the
newly-renamed "NotWindows" field, which still isn't named well, but
it's better than its old name of "Unknown" which hasn't been accurate
since unix sock peercreds work anyway.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And if we have over 10,000 CGNAT routes, just route the entire
CGNAT range. (for the hello test server)
Fixes#1450
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prior to e3df29d488, the Engine.SetLinkChangeCallback fired
immediately, even if there was no change. The ipnlocal code apparently
depended on that, and it broke integration tests (which live in
another repo). So mimic the old behavior and call the ipnlocal
callback immediately at init.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Gets it out of wgengine so the Engine isn't responsible for being a
callback registration hub for it.
This also removes the Engine.LinkChange method, as it's no longer
necessary. The monitor tells us about changes; it doesn't seem to
need any help. (Currently it was only used by Swift, but as of
14dc790137 we just do the same from Go)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And add a --socks5-server flag.
And fix a race in SOCKS5 replies where the response header was written
concurrently with the copy from the backend.
Co-authored with Naman Sood.
Updates #707
Updates #504
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
UIs need to see the full unedited netmap in order to know what exit nodes they
can offer to the user.
Signed-off-by: David Anderson <danderson@tailscale.com>
And open up socket permissions like Linux, now that we know who
connections are from.
This uses the new inet.af/peercred that supports Linux and Darwin at
the moment.
Fixes#1347Fixes#1348
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If no exit node is specified, the filter must still run to remove
offered default routes from all peers.
Signed-off-by: David Anderson <danderson@tailscale.com>
This one alone doesn't modify the global dependency map much
(depaware.txt if anything looks slightly worse), but it leave
controlclient as only containing NetworkMap:
bradfitz@tsdev:~/src/tailscale.com/ipn$ grep -F "controlclient." *.go
backend.go: NetMap *controlclient.NetworkMap // new netmap received
fake_test.go: b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
fake_test.go: b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
handle.go: netmapCache *controlclient.NetworkMap
handle.go:func (h *Handle) NetMap() *controlclient.NetworkMap {
Once that goes into a leaf package, then ipn doesn't depend on
controlclient at all, and then the client gets smaller.
Updates #1278
And move a couple other types down into leafier packages.
Now cmd/tailscale doesn't bring in netlink, magicsock, wgengine, etc.
Fixes#1181
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Use tb.Cleanup to simplify both the API and the implementation.
One behavior change: When the number of goroutines shrinks, don't log.
I've never found these logs to be useful, and they frequently add noise.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This is mostly code movement from the wireguard-go repo.
Most of the new wgcfg package corresponds to the wireguard-go wgcfg package.
wgengine/wgcfg/device{_test}.go was device/config{_test}.go.
There were substantive but simple changes to device_test.go to remove
internal package device references.
The API of device.Config (now wgcfg.DeviceConfig) grew an error return;
we previously logged the error and threw it away.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This adds a new IP Protocol type, TSMP on protocol number 99 for
sending inter-tailscale messages over WireGuard, currently just for
why a peer rejects TCP SYNs (ACL rejection, shields up, and in the
future: nothing listening, something listening on that port but wrong
interface, etc)
Updates #1094
Updates tailscale/corp#1185
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This partially reverts d6e9fb1df0, which modified the permissions
on the tailscaled Unix socket and thus required "sudo tailscale" even
for "tailscale status".
Instead, open the permissions back up (on Linux only) but have the
server look at the peer creds and only permit read-only actions unless
you're root.
In the future we'll also have a group that can do mutable actions.
On OpenBSD and FreeBSD, the permissions on the socket remain locked
down to 0600 from d6e9fb1df0.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Not usefully functional yet (mostly a proof of concept), but getting
it submitted for some work @namansood is going to do atop this.
Updates #707
Updates #634
Updates #48
Updates #835
* show DNS name over hostname, removing domain's common MagicDNS suffix.
only show hostname if there's no DNS name.
but still show shared devices' MagicDNS FQDN.
* remove nerdy low-level details by default: endpoints, DERP relay,
public key. They're available in JSON mode still for those who need
them.
* only show endpoint or DERP relay when it's active with the goal of
making debugging easier. (so it's easier for users to understand
what's happening) The asterisks are gone.
* remove Tx/Rx numbers by default for idle peers; only show them when
there's traffic.
* include peers' owner login names
* add CLI option to not show peers (matching --self=true, --peers= also
defaults to true)
* sort by DNS/host name, not public key
* reorder columns
If any goroutine continues to use the logger in TestLocalLogLines
after the test finishes, the test panics.
The culprit for this was wireguard-go; the previous commit fixed that.
This commit adds suspenders: When the test is done, make logging calls
into no-ops.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Previously the client had heuristics to calculate which DNS search domains
to set, based on the peers' names. Unfortunately that prevented us from
doing some things we wanted to do server-side related to node sharing.
So, bump MapRequest.Version to 9 to signal that the client only uses the
explicitly configured DNS search domains and doesn't augment it with its own
list.
Updates tailscale/corp#1026
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is a replacement for the key-related parts
of the wireguard-go wgcfg package.
This is almost a straight copy/paste from the wgcfg package.
I have slightly changed some of the exported functions and types
to avoid stutter, added and tweaked some comments,
and removed some now-unused code.
To avoid having wireguard-go depend on this new package,
wgcfg will keep its key types.
We translate into and out of those types at the last minute.
These few remaining uses will be eliminated alongside
the rest of the wgcfg package.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Addresses #964
Still to be done:
- Figure out the correct logging lines in util/systemd
- Figure out if we need to slip the systemd.Status function anywhere
else
- Log util/systemd errors? (most of the errors are of the "you cannot do
anything about this, but it might be a bad idea to crash the program if
it errors" kind)
Assistance in getting this over the finish line would help a lot.
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: rename the nonlinux file to appease the magic
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: fix package name
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: fix review feedback from @mdlayher
Signed-off-by: Christine Dodrill <me@christine.website>
cmd/tailscale{,d}: update depaware manifests
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: use sync.Once instead of func init
Signed-off-by: Christine Dodrill <me@christine.website>
control/controlclient: minor review feedback fixes
Signed-off-by: Christine Dodrill <me@christine.website>
{control,ipn,systemd}: fix review feedback
Signed-off-by: Christine Dodrill <me@christine.website>
review feedback fixes
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: fix sprintf call
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: make staticcheck less sad
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: print IP address in connected status
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: review feedback
Signed-off-by: Christine Dodrill <me@christine.website>
final fixups
Signed-off-by: Christine Dodrill <me@christine.website>
It appears some users have corrupted pref.conf files. Have LoadPrefs
treat these files as non-existent. This way tailscale will make user
login, and not crash.
Fixes#954
Signed-off-by: Alex Brainman <alex.brainman@gmail.com>
In 1.0, subnet relays were not specially handled when WPAD+PAC was
present on the network.
In 1.2, on Windows, subnet relays were disabled if WPAD+PAC was
present. That was what some users wanted, but not others.
This makes it configurable per domain, reverting back to the 1.0
default state of them not being special. Users who want that behavior
can then enable it.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We still use the packet.* alloc-free types in the data path, but
the compilation from netaddr to packet happens within the filter
package.
Signed-off-by: David Anderson <danderson@tailscale.com>
Seeing "frontend-provided legacy machine key" was weird (and not quite
accurate) on Linux machines where it comes from the _daemon key's
persist prefs, not the "frontend".
Make the log message distinguish between the cases.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When the service was running without a client (e.g. after a reboot)
and then the owner logs in and the GUI attaches, the computed state
key changed to "" (driven by frontend prefs), and then it was falling
out of server mode, despite the GUI-provided prefs still saying it
wanted server mode.
Also add some logging. And remove a scary "Access denied" from a
user-visible error, making the two possible already-in-use error
messages consistent with each other.
On Windows, we were previously treating a server used by different
users as a fatal error, which meant the second user (upon starting
Tailscale, explicitly or via Start Up programs) got an invasive error
message dialog.
Instead, give it its own IPN state and change the Notify.ErrMessage to
be details in that state. Then the Windows GUI can be less aggresive
about that happening.
Also,
* wait to close the IPN connection until the server ownership state
changes so the GUI doesn't need to repeatedly reconnect to discover
changes.
* fix a bug discovered during testing: on system reboot, the
ipnserver's serverModeUser was getting cleared while the state
transitioned from Unknown to Running. Instead, track 'inServerMode'
explicitly and remove the old accessor method which was error prone.
* fix a rare bug where the client could start up and set the server
mode prefs in its Start call and we wouldn't persist that to the
StateStore storage's prefs start key. (Previously it was only via a
prefs toggle at runtime)
os.IsNotExist doesn't unwrap errors. errors.Is does.
The ioutil.ReadFile ones happened to be fine but I changed them so
we're consistent with the rule: if the error comes from os, you can
use os.IsNotExist, but from any other package, use errors.Is.
(errors.Is always would also work, but not worth updating all the code)
The motivation here was that we were logging about failure to migrate
legacy relay node prefs file on startup, even though the code tried
to avoid that.
See golang/go#41122
It was especially bad on our GUI platforms with a frontend that polls it.
No need to log it every few seconds if it's unchanged. Make it slightly
less allocate-y while I'm here.
If we can't find the mapping from SID ("user ID") -> username, don't
treat that as a fatal. Apparently that happens in the wild for Reasons.
Ignore it for now. It's just a nice-to-have for error messages in the
rare multi-user case.
Updates #869
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When building with redo, also include the git commit hash
from the proprietary repo, so that we have a precise commit
that identifies all build info (including Go toolchain version).
Add a top-level build script demonstrating to downstream distros
how to burn the right information into builds.
Adjust `tailscale version` to print commit hashes when available.
Fixes#841.
Signed-off-by: David Anderson <danderson@tailscale.com>
Also replaces the IPv6Overlay bool with use of DebugFlags, since
it's currently an experimental configuration.
Signed-off-by: David Anderson <danderson@tailscale.com>
We were creating the controlclient and starting the portpoll concurrently,
which frequently resulted in the first controlclient connection being canceled
by the firsdt portpoll result ~milliseconds later, resulting in another
HTTP request.
Instead, wait a bit for the first portpoll result so it's much less likely to
interrupt our controlclient connection.
Updates tailscale/corp#557
This partially (but not yet fully) migrates Windows to tailscaled's
StateStore storage system.
This adds a new bool Pref, ForceDaemon, defined as:
// ForceDaemon specifies whether a platform that normally
// operates in "client mode" (that is, requires an active user
// logged in with the GUI app running) should keep running after the
// GUI ends and/or the user logs out.
//
// The only current applicable platform is Windows. This
// forced Windows to go into "server mode" where Tailscale is
// running even with no users logged in. This might also be
// used for macOS in the future. This setting has no effect
// for Linux/etc, which always operate in daemon mode.
Then, when ForceDaemon becomes true, we now write use the StateStore
to track which user started it in server mode, and store their prefs
under that key.
The ipnserver validates the connections/identities and informs that
LocalBackend which userid is currently in charge.
The GUI can then enable/disable server mode at runtime, without using
the CLI.
But the "tailscale up" CLI was also fixed, so Windows users can use
authkeys or ACL tags, etc.
Updates #275
It was previously possible for two different Windows users to connect
to the IPN server at once, but it didn't really work. They mostly
stepped on each other's toes and caused chaos.
Now only one can control it, but it can be active for everybody else.
Necessary dependency step for Windows server/headless mode (#275)
While here, finish wiring up the HTTP status page on Windows, now that
all the dependent pieces are available.
If no interfaces are up, calm down and stop spamming so much. It was
noticed as especially bad on Windows, but probably was bad
everywhere. I just have the best network conditions testing on a
Windows VM.
Updates #604
Josh Bleecher Snyder