tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	2d6e84e19e	net/netcheck, wgengine/magicsock: replace more UDPAddr with netaddr.IPPort	4 years ago
Brad Fitzpatrick	9070aacdee	wgengine/magicsock: minor comments & logging & TODO changes	4 years ago
Brad Fitzpatrick	e96f22e560	wgengine/magicsock: start handling disco message, use netaddr.IPPort more Updates #483	4 years ago
Brad Fitzpatrick	a83ca9e734	wgengine/magicsock: cache precomputed nacl/box shared keys Updates #483	4 years ago
Brad Fitzpatrick	a975e86bb8	wgengine/magicsock: add new endpoint type used for discovery-supporting peers This adds a new magicsock endpoint type only used when both sides support discovery (that is, are advertising a discovery key). Otherwise the old code is used. So far the new code only communicates over DERP as proof that the new code paths are wired up. None of the actually discovery messaging is implemented yet. Support for discovery (generating and advertising a key) are still behind an environment variable for now. Updates #483	4 years ago
Brad Fitzpatrick	6f73f2c15a	wgengine, internal/deepprint: replace UAPI usage as hash func; add deepprint The new deepprint package just walks a Go data structure and writes to an io.Writer. It's not pretty like go-spew, etc. We then use it to replace the use of UAPI (which we have a TODO to remove) to generate signatures of data structures to detect whether anything changed (without retaining the old copy). This was necessary because the UAPI conversion ends up trying to do DNS lookups which an upcoming change depends on not happening.	4 years ago
Brad Fitzpatrick	103c06cc68	wgengine/magicsock: open discovery naclbox messages from known peers And track known peers. Doesn't yet do anything with the messages. (nor does it send any yet) Start of docs on the message format. More will come in subsequent changes. Updates #483	4 years ago
David Crawshaw	9258d64261	wgengine/router: do not call ifconfig up if SetRoutesFunc is set The NetworkExtension brings up the interface itself and does not have access to `ifconfig`, which the underlying BSD userspace router attempts to use when Up is called. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Brad Fitzpatrick	23e74a0f7a	wgengine, magicsock, tstun: don't regularly STUN when idle (mobile only for now) If there's been 5 minutes of inactivity, stop doing STUN lookups. That means NAT mappings will expire, but they can resume later when there's activity again. We'll do this for all platforms later. Updates tailscale/corp#320 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	fe50cd0c48	ipn, wgengine: plumb NetworkMap down to magicsock Now we can have magicsock make decisions based on tailcfg.Debug settings sent by the server. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	19d95e095a	wgengine: fix blank line in interface method comment	4 years ago
Reinaldo de Souza	a8635784bc	wgengine: add BSD userspace router to darwin Darwin and FreeBSD are compatible enough to share the userspace router. The OSX router delegates to the BSD userspace router unless `SetRoutesFunc` is set. That preserves the mechanism that allows `ipn-go-bridge` to specify its own routing behavior. Fixes #177 Signed-off-by: Reinaldo de Souza <github@rei.nal.do>	4 years ago
Dmytro Shynkevych	de5f6d70a8	magicsock: eliminate logging race in test Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
Brad Fitzpatrick	53fb25fc2f	all: generate discovery key, plumb it around Not actually used yet. Updates #483	5 years ago
Brad Fitzpatrick	d9054da86a	wgengine: disambiguate Reconfig logging paths	5 years ago
Brad Fitzpatrick	abd79ea368	derp: reduce DERP memory use; don't require callers to pass in memory to use The magicsock derpReader was holding onto 65KB for each DERP connection forever, just in case. Make the derp{,http}.Client be in charge of memory instead. It can reuse its bufio.Reader buffer space.	5 years ago
Brad Fitzpatrick	280e8884dd	wgengine/magicsock: limit redundant log spam on packets from low-pri addresses Fixes #407 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	d05b0500ac	wgengine: loop back tuntap packets destined for local IPs. macOS incorrectly sends packets for the local Tailscale IP into our tunnel interface. We have to turn the packets around and send them back to the kernel. Fixes tailscale/corp#189. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Avery Pennarun	51d176ecff	wgengine: Remove leftover debug message. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Dmytro Shynkevych	07e02ec9d3	wgengine/tsdns: add test and prevent useless updates (#449 ) Signed-Off-By: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
Dmytro Shynkevych	511840b1f6	tsdns: initial implementation of a Tailscale DNS resolver (#396 ) Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
Dmytro Shynkevych	02231e968e	wgengine/tstun: add tests and benchmarks (#436 ) Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
Dmytro Shynkevych	059b1d10bb	wgengine/packet: refactor and expose UDP header marshaling (#408 ) Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
David Anderson	5a32f8e181	wgengine/router: also accept exit code 254 from `ip rule del`. iproute2 3.16.0-2 from Debian Jessie (oldoldstable) doesn't return exit code 2 when deleting a non-existent IP rule. Fixes #434 Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	08a38f21c9	wgengine/router: don't filter subnet routing in netfilter. We have a filter in tailscaled itself now, which is more robust against weird network topologies (such as the one Docker creates). Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Dmytro Shynkevych	73c40c77b0	filter: prevent escape of QDecode to the heap (#417 ) Performance impact: name old time/op new time/op delta Filter/tcp_in-4 70.7ns ± 1% 30.9ns ± 1% -56.30% (p=0.008 n=5+5) Filter/tcp_out-4 58.6ns ± 0% 19.4ns ± 0% -66.87% (p=0.000 n=5+4) Filter/udp_in-4 96.8ns ± 2% 55.5ns ± 0% -42.64% (p=0.016 n=5+4) Filter/udp_out-4 120ns ± 1% 79ns ± 1% -33.87% (p=0.008 n=5+5) Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
Brad Fitzpatrick	722673f307	Update go4.org/mem, adjust to revised API.	5 years ago
Brad Fitzpatrick	9e5d79e2f1	wgengine/magicsock: drop a bytes.Buffer sync.Pool, use logger.ArgWriter instead	5 years ago
Brad Fitzpatrick	becce82246	net/netns, misc tests: remove TestOnlySkipPrivilegedOps, argv checks The netns UID check is sufficient for now. We can do something else later if/when needed.	5 years ago
Avery Pennarun	e7ae6a2e06	net/netns, wgengine/router: support Linux machines that don't have 'ip rule'. We'll use SO_BINDTODEVICE instead of fancy policy routing. This has some limitations: for example, we will route all traffic through the interface that has the main "default" (0.0.0.0/0) route, so machines that have multiple physical interfaces might have to go through DERP to get to some peers. But machines with multiple physical interfaces are very likely to have policy routing (ip rule) support anyway. So far, the only OS I know of that needs this feature is ChromeOS (crostini). Fixes #245. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	e46238a2af	wgengine: separately dedupe wireguard configs and router configs. Otherwise iOS/macOS will reconfigure their routing every time anything minor changes in the netmap (in particular, endpoints and DERP homes), which is way too often. Some users reported "network reconfigured" errors from Chrome when this happens. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	f0b6ba78e8	wgengine: don't pass nil router.Config objects. These are hard for swift to decode in the iOS app. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
David Anderson	5114df415e	net/netns: set the bypass socket mark on linux. This allows tailscaled's own traffic to bypass Tailscale-managed routes, so that things like tailscale-provided default routes don't break tailscaled itself. Progress on #144. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	db2a216561	wgengine/magicsock: don't log on UDP send errors if address family known missing Fixes #376	5 years ago
David Crawshaw	cf5d25e15b	wgengine: ensure pingers are gone before returning from Close We canceled the pingers in Close, but didn't wait around for their goroutines to be cleaned up. This caused the ipn/e2e_test to catch pingers in its resource leak check. This commit introduces an object, but also simplifies the semantics around the pinger's cancel functions. They no longer need to be called while holding the mutex. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	9e3ad4f79f	net/netns: add package for start of network namespace support And plumb in netcheck STUN packets. TODO: derphttp, logs, control. Updates #144 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	a428656280	wgengine/magicsock: don't report v4 localhost addresses on IPv6-only systems Updates #376	5 years ago
David Anderson	fff062b461	wgengine/router: make runner.go linux-only for now. Otherwise, staticcheck complains that these functions are unused and unexported on macOS. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Avery Pennarun	f69003fd46	router_linux: work around terrible bugs in old iptables-compat versions. Specifically, this sequence: iptables -N ts-forward iptables -A ts-forward -m mark --mark 0x10000 -j ACCEPT iptables -A FORWARD -j ts-forward doesn't work on Debian-9-using-nftables, but this sequence: iptables -N ts-forward iptables -A FORWARD -j ts-forward iptables -A ts-forward -m mark --mark 0x10000 -j ACCEPT does work. I'm sure the reason why is totally fascinating, but it's an old version of iptables and the bug doesn't seem to exist on modern nftables, so let's refactor our code to add rules in the always-safe order and pretend this never happened. Fixes #401. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	9ff51909a3	router_linux: fix behaviour when switching --netfilter-mode. On startup, and when switching into =off and =nodivert, we were deleting netfilter rules even if we weren't the ones that added them. In order to avoid interfering with rules added by the sysadmin, we have to be sure to delete rules only in the case that we added them in the first place. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	a496cdc943	router_linux: remove need for iptables.ListChains(). Instead of retrieving the list of chains, or the list of rules in a chain, just try deleting the ones we don't want and then adding the ones we do want. An error in flushing/deleting still means the rule doesn't exist anymore, so there was no need to check for it first. This avoids the need to parse iptables output, which avoids the need to ever call iptables -S, which fixes #403, among other things. It's also much more future proof in case the iptables command line changes. Unfortunately the iptables go module doesn't properly pass the iptables command exit code back up when doing .Delete(), so we can't correctly check the exit code there. (exit code 1 really means the rule didn't exist, rather than some other weird problem). Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	8a6bd21baf	router_linux: extract process runner routines into runner.go. These will probably be useful across platforms. They're not really Linux-specific at all. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	34c30eaea0	router_linux: use only baseline 'ip rule' features that exist in old kernels. This removes the use of suppress_ifgroup and fwmark "x/y" notation, which are, among other things, not available in busybox and centos6. We also use the return codes from the 'ip' program instead of trying to parse its output. I also had to remove the previous hack that routed all of 100.64.0.0/10 by default, because that would add the /10 route into the 'main' route table instead of the new table 88, which is no good. It was a terrible hack anyway; if we wanted to capture that route, we should have captured it explicitly as a subnet route, not as part of the addr. Note however that this change affects all platforms, so hopefully there won't be any surprises elsewhere. Fixes #405 Updates #320, #144 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	30e5c19214	magicsock: work around race condition initializing .Regions[]. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Dmytro Shynkevych	737124ef70	tstun: tolerate zero reads Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
Brad Fitzpatrick	b0c10fa610	stun, netcheck: move under net	5 years ago
Brad Fitzpatrick	43ded2b581	wgengine/packet: add some tests, more docs, minor Go style, performance changes	5 years ago
Brad Fitzpatrick	e6b84f2159	all: make client use server-provided DERP map, add DERP region support Instead of hard-coding the DERP map (except for cmd/tailscale netcheck for now), get it from the control server at runtime. And make the DERP map support multiple nodes per region with clients picking the first one that's available. (The server will balance the order presented to clients for load balancing) This deletes the stunner package, merging it into the netcheck package instead, to minimize all the config hooks that would've been required. Also fix some test flakes & races. Fixes #387 (Don't hard-code the DERP map) Updates #388 (Add DERP region support) Fixes #399 (wgengine: flaky tests) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	e8b3a5e7a1	wgengine/filter: implement a destination IP pre-filter. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	7fb33123d3	wgengine/router: warn about another variation of busybox's `ip`. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Dmytro Shynkevych	635f7b99f1	wgengine: pass tun.NativeDevice to router Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
David Anderson	9c914dc7dd	wgengine/router: stop using -m comment. The comment module is compiled out on several embedded systems (and also gentoo, because netfilter can't go brrrr with comments holding it back). Attempting to use comments results in a confusing error, and a non-functional firewall. Additionally, make the legacy rule cleanup non-fatal, because we do have to probe for the existence of these -m comment rules, and doing so will error out on these systems. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	3e27b3c33c	wgengine/router: more comments. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	0fe262f093	ipn: plumb NetfilterMode all the way out to the CLI. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	c67c8913c3	wgengine/router: add a test for linux router state transitions. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	292606a975	wgengine/router: support multiple levels of netfilter involvement. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	e6d0c92b1d	wgengine/magicsock: clean up earlier fix a bit Move WaitReady from `fc88e34f42` into the test code, and keep the derp-reading goroutine named for debugging.	5 years ago
Avery Pennarun	d53e8fc0da	router_darwin_support: we can build this on every platform. Our new build scripts try to build ipn-go-bridge on more than just linux and darwin, so let's enable this file so it can be successful on every platform.	5 years ago
Avery Pennarun	fc88e34f42	wgengine/magicsock/tests: wait for home DERP connection before sending packets. This fixes an elusive test flake. Fixes #161. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	4f128745d8	magicsock/test: oops, fix a data race in nested-test logf hack. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	42a0e0c601	wgengine/magicsock/tests: call tstest.ResourceCheck for each test. This didn't catch anything yet, but it's good practice for detecting goroutine leaks that we might not find otherwise. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	08acb502e5	Add tstest.PanicOnLog(), and fix various problems detected by this. If a test calls log.Printf, 'go test' horrifyingly rearranges the output to no longer be in chronological order, which makes debugging virtually impossible. Let's stop that from happening by making log.Printf panic if called from any module, no matter how deep, during tests. This required us to change the default error handler in at least one http.Server, as well as plumbing a bunch of logf functions around, especially in magicsock and wgengine, but also in logtail and backoff. To add insult to injury, 'go test' also rearranges the output when a parent test has multiple sub-tests (all the sub-test's t.Logf is always printed after all the parent tests t.Logf), so we need to screw around with a special Logf that can point at the "current" t (current_t.Logf) in some places. Probably our entire way of using subtests is wrong, since 'go test' would probably like to run them all in parallel if you called t.Parallel(), but it definitely can't because the're all manipulating the shared state created by the parent test. They should probably all be separate toplevel tests instead, with common setup/teardown logic. But that's a job for another time. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Dmytro Shynkevych	33b2f30cea	wgengine: wrap tun.Device to support filtering and packet injection (#358 ) Right now, filtering and packet injection in wgengine depend on a patch to wireguard-go that probably isn't suitable for upstreaming. This need not be the case: wireguard-go/tun.Device is an interface. For example, faketun.go implements it to mock a TUN device for testing. This patch implements the same interface to provide filtering and packet injection at the tunnel device level, at which point the wireguard-go patch should no longer be necessary. This patch has the following performance impact on i7-7500U @ 2.70GHz, tested in the following namespace configuration: ┌────────────────┐ ┌─────────────────────────────────┐ ┌────────────────┐ │ $ns1 │ │ $ns0 │ │ $ns2 │ │ client0 │ │ tailcontrol, logcatcher │ │ client1 │ │ ┌─────┐ │ │ ┌──────┐ ┌──────┐ │ │ ┌─────┐ │ │ │vethc│───────┼────┼──│vethrc│ │vethrs│──────┼─────┼──│veths│ │ │ ├─────┴─────┐ │ │ ├──────┴────┐ ├──────┴────┐ │ │ ├─────┴─────┐ │ │ │10.0.0.2/24│ │ │ │10.0.0.1/24│ │10.0.1.1/24│ │ │ │10.0.1.2/24│ │ │ └───────────┘ │ │ └───────────┘ └───────────┘ │ │ └───────────┘ │ └────────────────┘ └─────────────────────────────────┘ └────────────────┘ Before: --------------------------------------------------- \| TCP send \| UDP send \| \|------------------------\|------------------------\| \| 557.0 (±8.5) Mbits/sec \| 3.03 (±0.02) Gbits/sec \| --------------------------------------------------- After: --------------------------------------------------- \| TCP send \| UDP send \| \|------------------------\|------------------------\| \| 544.8 (±1.6) Mbits/sec \| 3.13 (±0.02) Gbits/sec \| --------------------------------------------------- The impact on receive performance is similar. Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
David Anderson	9ccbcda612	wgengine/router: rename config.Settings to config.Config, make pointer. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	72cae5504c	wgengine: generate and plumb router.Settings in from ipn. This saves a layer of translation, and saves us having to pass in extra bits and pieces of the netmap and prefs to wgengine. Now it gets one Wireguard config, and one OS network stack config. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	cd01bcc395	wgengine/router: allow loopback traffic from our own IP(s). Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	bfdc8175b1	wgengine/router: add a setting to disable SNAT for subnet routes. Part of #320. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	8a3e77fc43	ipn, wgengine/filter: remove exported type aliases	5 years ago
David Anderson	21ac65d3da	wgengine/router: explicitly detect and complain about busybox's `ip`. Defensive programming against #368 in environments other than Docker, e.g. if you try using Tailscale in Alpine Linux directly, sans container. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	381b94d4d1	wgengine/router: include command output if `ip rule list` fails. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	e83d02ffd1	wgengine: don't double-close tundev on setup error. Part of #368. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	efc1feedc9	wgengine/router: include more information when iptables ops fail. The iptables package we use doesn't include command output, so we're left with guessing what went wrong most of the time. This will at least narrow things down to which operation failed. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	e16f7e48a3	wgengine: simplify wgcfg.* to netaddr.* conversion. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	ccbd0937d0	wgengine: avoid v6 mapped v4 IPs when converting to netaddr types. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Wendi Yu	499c8fcbb3	Replace our ratelimiter with standard rate package (#359 ) * Replace our ratelimiter with standard rate package Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>	5 years ago
David Anderson	b01db109f5	wgengine/router: use inet.af/netaddr, not wgcfg.CIDR. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	b8f01eed34	wgengine/router: remove wireguard-go config from settings. Instead, pass in only exactly the relevant configuration pieces that the OS network stack cares about. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	8861bb5a19	wgengine/router: alter API to support multiple addrs, and use on linux. FreeBSD and OpenBSD will error out with a complaint if we pass >1 address right now, but we don't yet so that's okay.	5 years ago
David Anderson	6802481bf5	wgengine/router: don't use gateway routes on linux.	5 years ago
David Anderson	78b1ed39ea	wgengine/router: add more documentation.	5 years ago
David Anderson	c9de43cd59	wgengine/router: fix typo. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	89af51b84d	wgengine: plumb locally advertised subnet routes. With this change, advertising subnet routes configures the firewall correctly. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	89198b1691	wgengine/router: rewrite netfilter and routing logic. New logic installs precise filters for subnet routes, plays nice with other users of netfilter, and lays the groundwork for fixing routing loops via policy routing. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	7618d7e677	wgengine/router: simplify some cmd invocations. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	fefd7e10dc	types/structs: add structs.Incomparable annotation, use it where applicable Shotizam before and output queries: sqlite> select sum(size) from bin where func like 'type..%'; 129067 => 120216	5 years ago
David Anderson	755fd9253c	wgengine/router: fix up docstring. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	1ac570def7	wgengine/router: split out from wgengine. The router implementations are logically separate, with their own API. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Avery Pennarun	ee3395e63a	wgengine/filter: fix linter warning. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	65fbb9c303	wgengine/filter: support subnet mask rules, not just /32 IPs. This depends on improved support from the control server, to send the new subnet width (Bits) fields. If these are missing, we fall back to assuming their value is /32. Conversely, if the server sends Bits fields to an older client, it will interpret them as /32 addresses. Since the only rules we allow are "accept" rules, this will be narrower or equal to the intended rule, so older clients will simply reject hosts on the wider subnet (fail closed). With this change, the internal filter.Matches format has diverged from the wire format used by controlclient, so move the wire format into tailcfg and convert it to filter.Matches in controlclient. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	85e675940d	wgengine/filter: allow ICMP response packets. Longer term, we should probably update the packet filter to be fully stateful, for both TCP and ICMP. That is, only ICMP packets related to a session we initiated should be allowed back in. But this is reasonably secure for now, since wireguard is already trimming most traffic. The current code would not protect against eg. Ping-of-Death style attacks from VPN nodes. Fixes tailscale/tailscale#290. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Brad Fitzpatrick	e1526b796e	ipn: don't listen on the unspecified address in test To avoid the Mac firewall dialog of (test) death. See `4521a59f30` which I added to help debug this.	5 years ago
Brad Fitzpatrick	18017f7630	ipn, wgengine/magicsock: be more idle when in Stopped state with no peers (Previously as #288, but with some more.) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
fgergo	8296c934ac	Update ifconfig_windows.go OLE calls sometimes unexpectedly fail, but retries can succeed. Change panic() to return errors. This way ConfigureInterface() retries can succeed.	5 years ago
David Anderson	9669b85b41	wgengine/magicsock: wait for endpoint updater goroutine when closing. Fixes #204. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Elias Naur	2dac4f2b24	wgengine/monitor: disable monitor on Android Netlink is not supported on Android. Signed-off-by: Elias Naur <mail@eliasnaur.com>	5 years ago
Brad Fitzpatrick	268d331cb5	wgengine/magicsock: prune key.Public-keyed on peer removals Fixes #215	5 years ago
Brad Fitzpatrick	00d053e25a	wgengine/magicsock: fix slow memory leak as peer endpoints move around Updates #215	5 years ago
Brad Fitzpatrick	7fc97c5493	wgengine/magicsock: use netaddr more In prep for deleting from the ever-growing maps.	5 years ago
Brad Fitzpatrick	6fb30ff543	wgengine/magicsock: start using inet.af/netaddr a bit	5 years ago
David Anderson	afbfe4f217	wgengine: drop wireguard MTU to 1280 bytes. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Avery Pennarun	dc9b39e3fb	wgengine/windows: use new winipcfg.Sync{Addresses,Routes} functions. This avoids flushing and reloading the whole list of addresses and routes whenever remote node information changes.	5 years ago
Brad Fitzpatrick	adf74c75ed	wgengine: also diagnose not-yet-rebooted system updates on Arch	5 years ago
Brad Fitzpatrick	45f2b53aca	all: remove unnecessary trailing newlines in format patterns for consistency And document on logger.Logf that it's unnecessary.	5 years ago
Brad Fitzpatrick	a7e7c7b548	wgengine/magicsock: close derp connections on rebind Fixes #276 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	614261d00d	wgengine/magicsock: reset AddrSet states on Rebind Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	c0697e1feb	net/interfaces: add IsExpensive and up state to State Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	a55c4217db	wgengine: diagnose why CreateTUN might've failed for users Fixes #273 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	3a3b64301e	wgengine: quiet some engine reconfig logging, make more consistent Updates #282 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	1ec27dbb5b	wgengine: remove an allocation in reconfig Minor.	5 years ago
David Crawshaw	5b95aa81ea	wgengine: remove IpcSetOperation on LinkChange This was only done occasionally, but was extremely disruptive when done and is no longer necessary. It used to be that when switching links, we had to immediately generate handshakes to everyone we were communicating with to punch a hole in any NAT we were talking through. (This ended up not really working, because in the process we got rid of our session keys and ended up having a futile conversation for many seconds.) Now we have DERP, our link change propogates to the other side as a new list of endpoints, so they start spraying packets. We will definitely get one thanks to DERP, which will cause us to spray, opening any NAT we are behind. The result is that for good connections, we don't trash session keys and cause an interruption. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	922d9546bf	wgengine: don't allocate so much in userspaceEngine.getStatus It was one of the top garbage producers on my phone. It's slated to be deleted and replaced anyway, but this helps in the meantime. The go.sum changes look scary, but the new dep only adds 240 bytes to the binary. The go.sum noise is just cmd/go being aggressive in including a lot of stuff (which is being fixed in Go 1.15, for what I understand). And I ran a go mod tidy, which added some too. (I had to write a custom wrapper around go mod tidy because this mod tidy normally breaks on tailscale.io/control being missing but referenced in tests) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	0f64d7f9cc	wgengine: remove a tiny allocation Drop in the bucket compared to the larger issues, but noticed it when looking at pprof.	5 years ago
Blake Gentry	e19287f60f	wgengine/magicsock: fix Conn docs type reference The docs on magicsock.Conn stated that they implemented the wireguard/device.Bind interface, yet this type does not exist. In reality, the Conn type implements the wireguard/conn.Bind interface. I also fixed a small typo in the same file. Signed-off-by: Blake Gentry <blakesgentry@gmail.com>	5 years ago
Brad Fitzpatrick	50aeb5b9ad	wgengine: unexport some windows funcs	5 years ago
Brad Fitzpatrick	322499473e	cmd/tailscaled, wgengine, ipn: add /debug/ipn handler with world state Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	2d48f92a82	wgengine/magicsock: re-stun every [20,27] sec, not 28 28 is cutting it close, and we think jitter will help some spikes we're seeing. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	577f321c38	wgengine/magicsock: revise derp fallback logic Revision to earlier `6284454ae5` Don't be sticky if we have no peers. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	2e420ad8b6	wgengine, wgengine/filter: minor doc, style, performance, locking changes Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	6284454ae5	wgengine/magicsock: if UDP blocked, pick DERP where most peers are Updates #207 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Avery Pennarun	f53e78e0d5	wgengine: don't lose filter state on filter reconfig. We were abandoning the UDP port LRU every time we got a new packet filter from tailcontrol, which caused return packets to suddenly stop arriving.	5 years ago
Brad Fitzpatrick	d321190578	wgengine/magicsock: stringify [IPv6]:port normally in AddrSet.String	5 years ago
Brad Fitzpatrick	3c3ea8bc8a	wgengine/magicsock: finish IPv6 transport support DEBUG_INCLUDE_IPV6=1 is still required, but works now. Updates #18 (fixes it, once env var gate is removed)	5 years ago
Brad Fitzpatrick	82ed7e527e	wgengine/magicsock: remove log allocation This was the whole point but I goofed at the last line.	5 years ago
Brad Fitzpatrick	8454bbbda5	wgengine/magicsock: more logging improvements * remove endpoint discovery noise when results unchanged * consistently spell derp nodes as "derp-N" * replace "127.3.3.40:" with "derp-" in CreateEndpoint log output * stop early DERP setup before SetPrivateKey is called; it just generates log nosie * fix stringification of peer ShortStrings (it had an old %x on it, rendering it garbage) * describe why derp routes are changing, with one of: shared home, their home, our home, alt	5 years ago
Brad Fitzpatrick	680311b3df	wgengine/magicsock: fix few remaining logs without package prefix	5 years ago
Brad Fitzpatrick	c473927558	wgengine/magicsock: clean up, add, improve DERP logs	5 years ago
Brad Fitzpatrick	ea9310403d	wgengine/magicsock: re-STUN on DERP connection death Fixes #201	5 years ago
Brad Fitzpatrick	1ab5b31c4b	derp, magicsock: send new "peer gone" frames when previous sender disconnects Updates #150 (not yet enabled by default in magicsock) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	b6f77cc48d	wgengine/magicsock: return early, outdent in derpWriteChanOfAddr	5 years ago
Brad Fitzpatrick	dd31285ad4	wgengine/magicsock: send IPv6 using pconn6, if available In prep for IPv6 support. Nothing should make it this far yet.	5 years ago
Brad Fitzpatrick	af277a6762	controlclient, magicsock: add debug knob to request IPv6 endpoints Add opt-in method to request IPv6 endpoints from the control plane. For now they should just be skipped. A previous version of this CL was unconditional and reportedly had problems that I can't reproduce. So make it a knob until the mystery is solved. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	221e7d7767	wgengine/magicsock: make log message include DERP port (node)	5 years ago
Brad Fitzpatrick	33bdcabf03	wgengine/magicsock: call stun callback w/ only valid part of STUN packet	5 years ago
David Anderson	0be475ba46	Revert "tailcfg, controlclient, magicsock: request IPv6 endpoints, but ignore them" Breaks something deep in wireguard or magicsock's brainstem, no packets at all can flow. All received packets fail decryption with "invalid mac1". This reverts commit `94024355ed`. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	94024355ed	tailcfg, controlclient, magicsock: request IPv6 endpoints, but ignore them Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	60ea635c6d	wgengine/magicsock: delete inaccurate comment I meant to include this in the earlier commit.	5 years ago
Brad Fitzpatrick	a184e05290	wgengine/magicsock: listen on udp6, use it for STUN, report endpoint More steps towards IPv6 transport. We now send it to tailcontrol, which ignores it. But it doesn't actually actually support IPv6 yet (outside of STUN). Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	7caa288213	wgengine/magicsock: rename pconn field to pconn4, in prep for pconn6	5 years ago
David Crawshaw	addbdce296	wgengine, ipn: include number of active DERPs in status Use this when making the ipn state transition from Starting to Running. This way a network of quiet nodes with no active handshaking will still transition to Active. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Crawshaw	1ad78ce698	magicsock: reconnect to home DERP on key change Typically the home DERP server is found and set on startup before magicsock's SetPrivateKey can be called, so no DERP connection is established. Make sure one is by kicking the home DERP tires in SetPrivateKey. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Crawshaw	455ba751d9	magicsock: start connection to HOME derp immediately The code as written intended to do this, but it repeated the comparison of derpNum and c.myDerp after c.myDerp had been updated, so it never executed. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Anderson	315a5e5355	scripts: add a license header checker. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	e085aec8ef	all: update to wireguard-go API changes Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	db2436c7ff	wgengine/magicsock: don't interrupt endpoint updates, merge all mutex into one Before, endpoint updates were constantly being interrupted and resumed on Linux due to tons of LinkChange messages from over-zealous Linux netlink messages (from router_linux.go) Now that endpoint updates are fast and bounded in time anyway, just let them run to completion, but note that another needs to be scheduled after. Now logs went from pages of noise to just: root@taildoc:~# grep -i -E 'stun\|endpoint update' log 2020/03/13 08:51:29 magicsock.Conn: starting endpoint update (initial) 2020/03/13 08:51:30 magicsock.Conn.ReSTUN: endpoint update active, need another later ("link-change-minor") 2020/03/13 08:51:31 magicsock.Conn: starting endpoint update (link-change-minor) 2020/03/13 08:51:31 magicsock.Conn.ReSTUN: endpoint update active, need another later ("link-change-minor") 2020/03/13 08:51:33 magicsock.Conn: starting endpoint update (link-change-minor) 2020/03/13 08:51:33 magicsock.Conn.ReSTUN: endpoint update active, need another later ("link-change-minor") 2020/03/13 08:51:35 magicsock.Conn: starting endpoint update (link-change-minor) 2020/03/13 08:51:35 magicsock.Conn.ReSTUN: endpoint update active, need another later ("link-change-minor") Or, seen in another run: 2020/03/13 08:45:41 magicsock.Conn: starting endpoint update (periodic) 2020/03/13 08:46:09 magicsock.Conn: starting endpoint update (periodic) 2020/03/13 08:46:21 magicsock.Conn: starting endpoint update (link-change-major) 2020/03/13 08:46:37 magicsock.Conn: starting endpoint update (periodic) 2020/03/13 08:47:05 magicsock.Conn: starting endpoint update (periodic) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	db31550854	wgengine: don't Reconfig on boring link changes Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	b9c6d3ceb8	netcheck: work behind UDP-blocked networks again, add tests Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	bc73dcf204	wgengine/magicsock: don't block in Send waiting for derphttp.Send Fixes #137 Updates #109 Updates #162 Updates #163 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	8807913be9	wgengine/magicsock: wait for previous DERP goroutines to end before new ones Updates #109 (hopefully fixes, will wait for graphs to be happy) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	eff6dcdb4e	wgengine/magicsock: log more about why we're re-STUNing	5 years ago
Brad Fitzpatrick	b3ddf51a15	wgengine/magicsock: add a pointer value for logging Updates #109 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago

1 2 3 4 5 ...

362 Commits (08949d4ef1082a4373b552d3901351e7a297c62d)