* add note regarding {host,group}_vars directory lookup semantics
While the 'ansible-playbook' command will look for {host,group}_vars in
both the playbook and inventory directories, the 'ansible' command
will only look in the inventory directory. This follows from a close
reading of the documentation but isn't explicit and leads to the
perhaps unexpected result that you can run both commands with the same
configuration in the same directory and get different results.
This commit adds a note to the documentation making the difference in
behavior explicit.
Closes#48065
* incorporates bcoca feedback
From installing / Running from source.
Since the repomerge, Ansible doesn't use submodules. Also, between 2.12.0 and 2.13.0 git dropped '--recursive' in favor of '--recurse-submodules'.
* Added basic equivalent to PowerShell modules
* changes based on latest review
* Added tests
* ignore sanity test due to how tests are set up
* Changes to work with PSCore
* Added documentation and change updated more modules
* Add some speed optimisations to AddType
* fix some issues in the doc changes
* doc changes
* Removed deprecated ANSIBLE_HOSTS
* Bump sudo/su configs to match deprecation version for cli and playbook args
* Bump include configs to match deprecation version for 'include'
* There were 2 introduction headings
line 36 was a duplicate 'introduction' heading, and the section is more of a requisites description.
+label: docsite_pr
* edit for line 32+33 & 45>50 added
* Fixes#18568
* Commit of the first set of utm modules
* added documentation line for module_utils file
* removed other utm modules for the first pr
* added maintainers to botmeta
* implemented fixes for shippable
* fixed whitespaces and newlines in included doc fragment
* added types and choices to documentation
* fix for E501
* Implemented change requests
* changed utm_utils license to BSD
* changed str() to to_native()
* added a status state that will just return information about my object
* renamed state 'status' to 'info'
* added team_e-spirit to botmeta and added the team as maintainer for the utm_utils
* only return a result if the lookup was not empty. Do not return a null result
* removed info state
* added boilerplate
* made preparation for info-only modules
* Add shorthand debugger method to recreate the task from the original ds, and re-template. Fixes#46321
* Fix rst header
* Indicate update_task was added in 2.8
* Fix prompt mismatch issue for ios
Fixes#40884#44463
* If the command prompt is matched check if data is
still pending to be read from buffer.
* This fix adds a new timer `buffer_read_timeout`
which will be trigerred after command prompt
is matched and data is attempted to be read from channel.
If not data is present of channel the timer will expire
and response we be returned to calling function.
* Fix unit test failure
* Update to make buffer timeout float
* Update doc and fix review comment
* Fix CI issues
* Update doc
* Fix review comments
* Fix review comments
* add note about named tasks in blocks
Signed-off-by: Adam Miller <admiller@redhat.com>
* adds names to tasks within example block, removes 2nd example
* removes traces of bad rebase
<!--- Your description here -->
+label: docsite_pr
Windows Subsystem for Linux is now officially supported by Microsoft. It is out of beta and will be shipping on Windows Sever 2019.
* Add symlinks sanity test.
* Replace legacy test symlinks with actual content.
* Remove dir symlink from template_jinja2_latest.
* Update import test to use generated library dir.
* Fix copy test symlink setup.
* Fix spelling of 'separate' throughout.
* Various cleanups in the User Guide for Vault.
- Fix spelling of 'algorithm'
- Fix indentation of nested list in payload format
- Fix mysterious refernce to 'b_pkey1'.
- Fix reference to newline as '\n': the backslash is lost when rendered
to the docs website. Specify the hex value for newline instead of the
backslash escape.
* Fix formatting
* Update vault.rst
A lot of modules have a short_description with a trailing dot even
though we don't want trailing dots in the index. This change removes
it when creating the document index.
* adds support for null values to the ternary filter
This change adds a third optional argument to the ternary filter to
handle a null value. If the third option is specified null and false
are treated differently.
For instance, take the following example:
{{ enabled | ternary('no shutdown', 'shutdown') }}
If enabled == True, then 'no shutdown' is used.
If enabled in (False, None), then 'shutdown' is used.
With this change the following is possible:
{{ enabled | ternary('no shutdown', 'shutdown', omit) }}
If enabled == True, then 'no shutdown'
If enabled == False, then 'shutdown'
If enabled == None, then omit
* update documentation with example of filter
* update filter documentation example per comments
* fix logic error in user_guide example
* win async: use async_dir for the async results file directory
* tried to unify POSIX and PowerShell async implementations of async_dir
* fix sanity issue
The documented way to execute module code locally wasn't always working:
$ python ./lib/ansible/modules/files/file.py <<< '{"ANSIBLE_MODULE_ARGS": {}}'
Traceback (most recent call last):
File "./lib/ansible/modules/files/file.py", line 177, in <module>
from ansible.module_utils.basic import AnsibleModule
File "~/ansible/lib/ansible/module_utils/basic.py", line 78, in <module>
import tempfile
File "~/ansible/lib/ansible/modules/files/tempfile.py", line 69, in <module>
from tempfile import mkstemp, mkdtemp
ImportError: cannot import name 'mkstemp'
* Add the key_name/value_name options to dict2items - as with items2dict, allow users to configure the key/value name for dict2items, add "version added" and examples
Adds the `--update` flag to automatically update the cache and the `--yes` flag to disable the Ansible repo description and skips confirmation dialog. +label: docsite_pr
* Merge issue
* Update cnos_rollback.py
* Updating license for the refactored method
* Update cnos_rollback.py
* Removing the BSD License as suggested by Legal
* To add Documentation for ENOS as well as CNOS
* Merge issue
* Revert "To add Documentation for ENOS as well as CNOS"
This reverts commit 80e6e39054be0c3a8f95d16dc39ca9d93baf8c4b.
* Adding Docs for ENOS and CNOS
* Update cnos.py
* Update cnos_rollback.py
* Update cnos.py
* Update platform_cnos.rst
* Update platform_enos.rst
* Removed version 2.7
* Removing 2.7
plugins/ is COMMUNITY
Set sensible defaults for directories
support:network for the platforms that we Networking SUPPORTS,
everything else is COMMUNITY
Mark other support:network (ansible-connection, etc)
Infoblox is support:core
contrib/ by definition should be support:community
Remove duplicated labels
Make yamllint happy(ier)
Adds sanity test to ensure BOTMETA.yml is valid
* Make the following scripts idempotent so that we only have to rebuild changed docs, not all docs:
* plugin_formatter
* generate_man
* dump_keywords.py
* dump_config.py
* testing_formatter.sh
* update porting guides
With PR #40532 `shade` library was retired and replaced with direct use
of `openstacksdk`. Porting guides and doc about dynamic inventory were
not updated.
* orphans testing pages to avoid not-in-toctree errors
* orphans various pages pending reorg
* adds module_utils and special_vars to main TOC
* uses a glob for scenario_guide TOC
* normalize and Sentence-case headings on community pages, typos
* re-orgs community TOC, adds all pages to toctree
* removes scenario guides index page
* adds style guide to community index
* basic update to style guide
* fix typo that created a new error
* removes not-in-toctree from ignore errors list
* leave removing files for future cleanup task
* Add docs on how to write changelog fragments
* Make recommended changes
* Restore lines and make recommended changes
* Add link to new style changelog
Remove redundant mention of old style changelog
* Initial commit for the Meraki scenario guide
* Added Meraki guide to indexes, fixed an error
* Added common parameters to scenario guide
* Add additional information for first draft
- Added very common parameters everyone uses.
- Documented common format for returned data from Meraki.
- High level explanation of error handling.
* Fix .rst formatting error
* Added section about handling returned data. More to come.
* Small formatting changes
* expect ssh_key_data to be a string instead of path
ssh_key_data should be a string filled with the private key
the old behavior can be archived with a lookup
Fixes#45119
* clarifies ssh_key_data description, adds newline
<!--- Your description here -->
`pip install ansible[azure]` results in `zsh: no matches found: ansible[azure]` at least in my computer (zsh on Ubuntu). I don't know if it is the case with all shells, but at least for me it is. Since square brackets `[]` are special characters in bash, I propose adding single quotes to make sure that package name is always interpreted as literal. The same error is also resolvable by setting noglob.
Correct and clarify "set_fact" example, expanding on what is happening
in the easy-to-get-wrong import mode. Add some additional links to "group_by" documentation and the main import/include discussion.
Closes: #31596
* Improve clarity of precedence when command-line parameters are used.
* Add command-line values into the precedence list.
* Several sample config snippets were included without any explanation
of how those snippets would be processed. Added descriptions so that
the reader can understand what each snippet will (or won't) accomplish.
* Don't focus on inventory as much
Expand on the fact that it's the fact that a variable is set that
matters, not the source of the variable.
* fixed network automation index issues
* replace :doc: with :ref:
* fixed anchor misspelling
* fix toc/nav issue -do not put toctree under a subheader
* Share the implementation of hashing for both vars_prompt and password_hash.
* vars_prompt with encrypt does not require passlib for the algorithms
supported by crypt.
* Additional checks ensure that there is always a result.
This works around issues in the crypt.crypt python function that returns
None for algorithms it does not know.
Some modules (like user module) interprets None as no password at all,
which is misleading.
* The password_hash filter supports all parameters of passlib.
This allows users to provide a rounds parameter, fixing #15326.
* password_hash is not restricted to the subset provided by crypt.crypt,
fixing one half of #17266.
* Updated documentation fixes other half of #17266.
* password_hash does not hard-code the salt-length, which fixes bcrypt
in connection with passlib.
bcrypt requires a salt with length 22, which fixes#25347
* Salts are only generated by ansible when using crypt.crypt.
Otherwise passlib generates them.
* Avoids deprecated functionality of passlib with newer library versions.
* When no rounds are specified for sha256/sha256_crypt and sha512/sha512_crypt
always uses the default values used by crypt, i.e. 5000 rounds.
Before when installed passlibs' defaults were used.
passlib changes its defaults with newer library versions, leading to non
idempotent behavior.
NOTE: This will lead to the recalculation of existing hashes generated
with passlib and without a rounds parameter.
Yet henceforth the hashes will remain the same.
No matter the installed passlib version.
Making these hashes idempotent.
Fixes#15326Fixes#17266Fixes#25347 except bcrypt still uses 2a, instead of the suggested 2b.
* random_salt is solely handled by encrypt.py.
There is no _random_salt function there anymore.
Also the test moved to test_encrypt.py.
* Uses pytest.skip when passlib is not available, instead of a silent return.
* More checks are executed when passlib is not available.
* Moves tests that require passlib into their own test-function.
* Uses the six library to reraise the exception.
* Fixes integration test.
When no rounds are provided the defaults of crypt are used.
In that case the rounds are not part of the resulting MCF output.
* Fix ansible-doc wrt removed modules
* Fix listing of modules ia ansible-doc to not complain about removed modules
Removed modules are marked as such in the metadata but nowhere else.
Need to retrieve the metadata when a module doesn't have a doc so that
we can tell if it falls under this case.
* omit removed modules from json dump
* Print an error that the module has been removed if attempting to run
ansible-doc on that specific module
* Get plugin_formatter to stop outputting removed modules
Since the ACI modules (like most network-related modules) run on the
local controller, this PR adds the necessary details so users are aware
of this particular feature.
Extends `module_defaults` by adding a prefix to defaults `group/` which denotes a builtin list of modules. Initial groups are: `group/aws`, `group/azure`, and `group/gcp`
Wow, this does not seem to be an uncommon misspelling. Might be there
are some left that span over two lines. I noticed the one in the git
module and then used `grep -rw 'the the'` to find some more.
Blocks currently don't support loops such as with_items or sequence. It would be helpful to make this clear in the docs otherwise it's a bit of a gotcha.
+label: docsite_pr
Fixes#40650Fixes#40245Fixes#41541
* Refactor netconf_config module as per proposal #104
* Update netconf_config module metadata to core network supported
* Refactor local connection to use persistent connection framework
for backward compatibility
* Update netconf connection plugin configuration varaibles (Fixes#40245)
* Add support for optional lock feature to Fixes#41541
* Add integration test for netconf_config module
* Documentation update
* Move deprecated options in netconf_config module
* restore task arg splatting
* reverts #41804
* supersedes #41295
* fixes#42192
* after lots of discussion amongst the core team, we decided to preserve this feature, clarify the runtime warnings/docs, and prioritize a path toward fixing the underlying behavior that causes this feature to be insecure (un-namespaced facts).
* update faq text
note that warning is disabled when inject_facts_as_vars is
* wordsmithing FAQ entry
The "viewdocs" target was removed in
0381bc170c681b6ea8a94467c62e0694e3d9029d; running "make webdocs" gets
you the output for initial testing purposes.
* Remove use of simplejson throughout code base. Fixes#42761
* Address failing tests
* Remove simplejson from contrib and other outlying files
* Add changelog fragment for simplejson removal
Example instantiates an AnsibleError which derives from Exception but doesn't actually raise it like intended. This is misleading as it's not clear without examining the code for AnsibleError to know that it's not some function which would raise the exception automatically.
Only print warning when ansible.cfg is actually skipped
* Also add unittests for the find_ini_config_file function
* Add documentation on world writable current working directory
config files can no longer be loaded from a world writable current
working directory but the end user is allowed to specify that
explicitly. Give appropriate warnings and information on how.
Fixes#42388
* Update troubleshooting doc for command timeout
* Update timeout document to reflect the new way to set
command timeout per task basis for network_cli and netconf
connection type as per PR #42847
* Fix CI failure
* Fix review comment
* Fix typo in doc
* Implement initial RouterOS support
* Correct matchers for license prompts
* Documentation updates & mild refactor
* Remove one last Cisco function
* Sanity test fixes
* Move imports to the beginning
* Remove authorize property
* Handle ANSI codes
* Revert to_lines function
* CR fixes
* test(routeros): add unit tests
* Added another test (with ANSI colors and banner in fixture).
* Ignore CRLF line endings in system_package_print file
* fix: review by ganeshrn
Now that we don't need to worry about python-2.4 and 2.5, we can make
some improvements to the way AnsiballZ handles modules.
* Change AnsiballZ wrapper to use import to invoke the module
We need the module to think of itself as a script because it could be
coded as:
main()
or as:
if __name__ == '__main__':
main()
Or even as:
if __name__ == '__main__':
random_function_name()
A script will invoke all of those. Prior to this change, we invoked
a second Python interpreter on the module so that it really was
a script. However, this means that we have to run python twice (once
for the AnsiballZ wrapper and once for the module). This change makes
the module think that it is a script (because __name__ in the module ==
'__main__') but it's actually being invoked by us importing the module
code.
There's three ways we've come up to do this.
* The most elegant is to use zipimporter and tell the import mechanism
that the module being loaded is __main__:
* 5959f11c9d/lib/ansible/executor/module_common.py (L175)
* zipimporter is nice because we do not have to extract the module from
the zip file and save it to the disk when we do that. The import
machinery does it all for us.
* The drawback is that modules do not have a __file__ which points
to a real file when they do this. Modules could be using __file__
to for a variety of reasons, most of those probably have
replacements (the most common one is to find a writable directory
for temporary files. AnsibleModule.tmpdir should be used instead)
We can monkeypatch __file__ in fom AnsibleModule initialization
but that's kind of gross. There's no way I can see to do this
from the wrapper.
* Next, there's imp.load_module():
* https://github.com/abadger/ansible/blob/340edf7489/lib/ansible/executor/module_common.py#L151
* imp has the nice property of allowing us to set __name__ to
__main__ without changing the name of the file itself
* We also don't have to do anything special to set __file__ for
backwards compatibility (although the reason for that is the
drawback):
* Its drawback is that it requires the file to exist on disk so we
have to explicitly extract it from the zipfile and save it to
a temporary file
* The last choice is to use exec to execute the module:
* https://github.com/abadger/ansible/blob/f47a4ccc76/lib/ansible/executor/module_common.py#L175
* The code we would have to maintain for this looks pretty clean.
In the wrapper we create a ModuleType, set __file__ on it, read
the module's contents in from the zip file and then exec it.
* Drawbacks: We still have to explicitly extract the file's contents
from the zip archive instead of letting python's import mechanism
handle it.
* Exec also has hidden performance issues and breaks certain
assumptions that modules could be making about their own code:
http://lucumr.pocoo.org/2011/2/1/exec-in-python/
Our plan is to use imp.load_module() for now, deprecate the use of
__file__ in modules, and switch to zipimport once the deprecation
period for __file__ is over (without monkeypatching a fake __file__ in
via AnsibleModule).
* Rename the name of the AnsiBallZ wrapped module
This makes it obvious that the wrapped module isn't the module file that
we distribute. It's part of trying to mitigate the fact that the module
is now named __main)).py in tracebacks.
* Shield all wrapper symbols inside of a function
With the new import code, all symbols in the wrapper become visible in
the module. To mitigate the chance of collisions, move most symbols
into a toplevel function. The only symbols left in the global namespace
are now _ANSIBALLZ_WRAPPER and _ansiballz_main.
revised porting guide entry
Integrate code coverage collection into AnsiballZ.
ci_coverage
ci_complete
* Support multi-doc yaml in the from_yaml filter
* Most automatic method of handling multidoc
* Only use safe_load_all
* Implement separate filter
* Update plugin docs and changelog
* Update Shippable integration test groups.
* Update integration test group aliases.
* Rebalance AWS and Azure tests with extra group.
* Rebalance Windows tests with another group.
* win_chocolatey: refactor module to fix bugs and add new features
* Fix some typos and only emit install warning not in check mode
* Fixes when testing out installing chocolatey from a server
* Added changelog fragment
* Enable check_mode in command module
This only works if supplying creates or removes since it needs
something to base the heuristic off. If none are supplied it will just
skip as usual.
Fixes#15828
* Add documentation for new check_mode behavior
<!--- Your description here -->
The example has:
`{{ 'Some DNS servers are 8.8.8.8 and 8.8.4.4' | regex_findall('\b(?:[0-9]{1,3}\.){3}[0-9]{1,3}\b') }}`
It needs be double backslashes to escape the backslashes:
`{{ 'Some DNS servers are 8.8.8.8 and 8.8.4.4' | regex_findall('\\b(?:[0-9]{1,3}\\.){3}[0-9]{1,3}\\b') }}`
+label: docsite_pr
* Update Openstack dynamic inventory link
* Add note for change of script name
* Change name of script to prevent Python module import errors.
Fixes#41562
* First pass at making 'private' work on include_role, imports are always public
* Prevent dupe task execution and overwriting handlers
* New functionality will use public instead of deprecated private
* Add tests for public exposure
* Validate vars before import/include to ensure they don't expose too early
* Add porting guide docs about public argument and change to import_role
* Add additional docs about public and vars exposure to module docs
* Insert role handlers at parse time, exposing them globally
* VMware: Remove VM using vmware_guest
This adds scenario guide for removing VM using vmware_guest module.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* code review comments
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* inventory plugin docs
* added set options
* minor wording and formatting fixes
* changed headers to std as per #35520, also added to main readme
* unified inventory plugin devel, referenced from generic plugin dev
* fixed typos and update as per feedback
Fixes#37262Fixes#36284
* Updates options in netconf connection to enable
bastion/jump host setting using configuration/enviornment
varaibles.
* Update troubleshooting docs from using bastion host with netconf
connection
* Revert "Account for empty string regexp in lineinfile (#41451)"
This reverts commit 4b5b4a760c.
* Use context managers for interacting with files
* Store line and regexp parameters in a variable
* Add warning when regexp is an empty string
* Remove '=' from error messages
* Update warning message and add changelog
* Add tests
* Improve warning message
Offer an equivalent regexp that won't trigger the warning.
Update tests to match new warning.
* Add porting guide entry for lineinfile change
* runas + async - get working on older hosts
* fixed up sanity issues
* Moved first task to end of test for CI race issues
* Minor change to async test to be more stable, change to runas become to not touch the disk
* moved async test back to normal spot
This commit: fa5c0282a4 relied upon
features present in Jinja-2.10 and above. The changes here allow us to
build the *rst* with older versions of jinja2.
* add a third way to disable cows
Cows are great, but there's a third way to disable. I'm sure my RST markup can be improved.
* oops, actually in ansible.cfg
While the HTML produced is perfectly valid, without the `trim` filter,
a lot of warnings are emitted (700 lines of warnings out of 2812 are
eliminated by this change)
Read the Docs moved hosting to readthedocs.io instead of
readthedocs.org. Fix all links in the project.
For additional details, see:
https://blog.readthedocs.com/securing-subdomains/
> Starting today, Read the Docs will start hosting projects from
> subdomains on the domain readthedocs.io, instead of on
> readthedocs.org. This change addresses some security concerns around
> site cookies while hosting user generated data on the same domain as
> our dashboard.
Documented procedure to handle package dependencies required by
packages which are Ansible dependencies.
Fixes: #30732Fixes: #16571
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add docs detailing how to convert many with_X style loops to use loop and filters. Fixes#40727
* Switch lookup used in query vs lookup comparison, to not recommend use of nested lookup
* Improve docs based on feedback
Address Firefox table-rendering issues in docs. Refactor to use colspan to provide table cells which can vary in width and indentation; the outermost has the greatest colspan, and each nested key has a colspan of one less than the parent, with padding cells for indentation.
Apply styling to table cells to get the table height to work without hacks or browser-specific
styling. Simplify the markup and CSS by removing extra divs. Use two passes over the options, return values, and return facts in the Jinja2 module-docs template: one to determine the maximum nesting depth to compute the maximum colspan needed, plus one to lay out the rows.
* Move k8s modules to dynamic backend
* update required openshift version
* update -> patch
* use new dynamic client exceptions
* style
* guard urllib3 import
* guard ansibleerror import
* give more information about error cause
* format in variable
* style
* rename tests
* Search for provided kind in a few more places to match old behavior, properly handle failure
* make common code use fail instead of fail_json, to work for lookup plugins as well
* update docs
* move openshift_raw tests into k8s tests
* fix typo
* Use diff of response and resource to determine change, don't do any checking client-side before making requests
* remove duplicate yaml blocks
* Update porting guide for k8s module
* remove invalid doc refs
* If fuzzy searching finds a resource, update resource_definition to match proper kind and version
* remote unsupported openshift_raw variables
* properly check environment variables when determining auth method:
* Add a 'machinectl shell' become_method
* docs: add explanations for the machinectl become_method
* docs: machinectl become_method: specify this part is specific to Linux+systemd setups
This Makefile uses non-standard constructs. As such it can only be
parsed by GNU make, which is often installed as 'gmake' instead of
'make'. Using $(MAKE) ensures the same version of make gets called that
is used to execute the top level.
OpenBSD comes with its own encryption utility as well, which must be run on the password text `encrypt <password>`. following the code block above, i just included the base command in the code block. I wasn't quite sure where to add my change, so I put it at the bottom of the section since the rest all flows well together.
+label: docsite_pr
* Docs - add shared snippet note about password prompts for ssh keys
Signed-off-by: Adam Miller <admiller@redhat.com>
* add note to ssh connection plugin, fix markup, fix typo
Signed-off-by: Adam Miller <admiller@redhat.com>
* * Memset:
* module_utils and associated documentation.
* module to manage DNS zones.
* integration tests to run against Memset's API.
* * memset.py:
* remove import of requests from memset.py in favour of internal Ansible modules.
* import necessary Ansible modules for request and response handling.
* create a response object in order to retain a stable interface to memset_api_call from existing modules.
* rework memset_api_call to remove requests.
* memset_zone.py:
* improve short description to be more verbose.
* ensure all imports directly follow documentation.
* remove any reference to requests.
* correct keyerror carried over from elsewhere.
* remove dependency on requests from documentation string
* disable integration tests until we have a cleanup method available
* HTTPAPI connection
* Punt run_commands to cliconf or httpapi
* Fake enable_mode on eapi
* Pull changes to nxos
* Move load_config to edit_config for future-preparedness
* Don't fail on lldp disabled
* Re-enable check_rc on nxos' run_commands
* Reorganize nxos httpapi plugin for compatibility
* draft docs for connection: httpapi
* restores docs for connection:local for eapi
* Add _remote_is_local to httpapi
* Change behavior to behaviour
- use existing fact to get hash setting rather than shell task
- fix code highlighting syntax in playbooks_variables.rst
* Re-wrote intro section; this entire topic needs a clean-up/rewrite.
* Set src in the state functions rather than the toplevel
A good API should only require passing one version of a piece of data
around so do that for src
* Move the rewriting of path into additional_parameter_handling
When the path is a directory we can rewrite the path to be a file inside
of the directory
* Emit a warning when src is used with a state where it should be ignored
* Update structure to include file extensions
It is not clear to novice users that the host/group_vars files should be yaml files. This highlights that IMHO a bit more clearer.
* pluralize
* Treat C(...) as inline literal (as opposed to interpreted text).
* Making test for true and false more precise, to avoid matching 1, 1.0, etc.
* The 'is sameas' test already takes care of definedness.
ARA is an Ansible callback that records playbook run data in a local
or remote database. This data is exposed through a CLI client as well
as a reporting web application.
* Allow subspec defaults to be processed when the parent argument is not supplied
* Allow this to be configurable via apply_defaults on the parent
* Document attributes of arguments in argument_spec
* Switch manageiq_connection to use apply_defaults
* add choices to api_version in argument_spec
* base64 filter: Added ability to specify encoding
* Added unicode chars for further testing
* Removed errors to keep previous behaviour in place
* Removed surrogate pairs due to issues loading YAML in CI
* Initial commit
Query an organization within Meraki. No support is in place for managing
or creating yet
* Change output_level method and make the state parameter required.
* Implemented listing all organizations
- Updated documentation
- Parse results and return all organizations
- Parse results and return specified organization
* Framework for creating an organization
- Documentation example for organization creation
- Framework exists for creating organizations, pending PR 36809
- Created functions for HTTP calls
- Renamed from dashboard.meraki.com to api.meraki.com
- Added required_if for state
* Remove absent state
- Meraki API does not support deleting an organization so absent is removed
- Updated documentation to call it state instead of status
* Small change to documentation
* Support all parameters associated to organization
- Added all parameters needed for all organization actions.
- None of the added ones work at this time.
- Added documentation for clone.
* Integration test for meraki_organization module
* Rename module to meraki for porting to module utility
* Meraki documentation fragment
- Created initial documentation fragment for Meraki modules
* Add meraki module utility to branch. Formerly was on a separate branch.
* CRU support for Meraki organization module
* CRU is supported for Meraki organizations
* There is no DELETE function for organizations in the API
* This code is very messy and needs cleanup
* Create and Update actions don't show status as updated, must fix
* Added Meraki module utility to module utility documentation list
* Added support for organization cloning
* Renamed use_ssl to use_https
* Removed define_method()
* Removed is_org()
* Added is_org_valid() which does all org sanity checks
* Fixes for ansibot
- Changed default of use_proxy from true to false
- Removed some commented out code
- Updated documentation
* Changes for ansibot
- Removed requirement for state parameter. I may readd this.
- Updated formatting
diff --git a/lib/ansible/module_utils/network/meraki/meraki.py b/lib/ansible/module_utils/network/meraki/meraki.py
index 3acd3d1038..395ac7c4b4 100644
--- a/lib/ansible/module_utils/network/meraki/meraki.py
+++ b/lib/ansible/module_utils/network/meraki/meraki.py
@@ -42,7 +42,7 @@ def meraki_argument_spec():
return dict(auth_key=dict(type='str', no_log=True, fallback=(env_fallback, ['MERAKI_KEY'])),
host=dict(type='str', default='api.meraki.com'),
name=dict(type='str'),
- state=dict(type='str', choices=['present', 'absent', 'query'], required=True),
+ state=dict(type='str', choices=['present', 'absent', 'query']),
use_proxy=dict(type='bool', default=False),
use_https=dict(type='bool', default=True),
validate_certs=dict(type='bool', default=True),
diff --git a/lib/ansible/modules/network/meraki/meraki_organization.py b/lib/ansible/modules/network/meraki/meraki_organization.py
index 923d969366..3789be91d6 100644
--- a/lib/ansible/modules/network/meraki/meraki_organization.py
+++ b/lib/ansible/modules/network/meraki/meraki_organization.py
@@ -20,11 +20,9 @@ short_description: Manage organizations in the Meraki cloud
version_added: "2.6"
description:
- Allows for creation, management, and visibility into organizations within Meraki
-
notes:
- More information about the Meraki API can be found at U(https://dashboard.meraki.com/api_docs).
- Some of the options are likely only used for developers within Meraki
-
options:
name:
description:
@@ -32,21 +30,18 @@ options:
- If C(clone) is specified, C(name) is the name of the new organization.
state:
description:
- - Create or query organizations
- choices: ['query', 'present']
+ - Create or modify an organization
+ choices: ['present', 'query']
clone:
description:
- Organization to clone to a new organization.
- type: string
org_name:
description:
- Name of organization.
- Used when C(name) should refer to another object.
- type: string
org_id:
description:
- ID of organization
-
author:
- Kevin Breit (@kbreit)
extends_documentation_fragment: meraki
@@ -86,7 +81,6 @@ RETURN = '''
response:
description: Data returned from Meraki dashboard.
type: dict
- state: query
returned: info
'''
@@ -103,6 +97,7 @@ def main():
argument_spec = meraki_argument_spec()
argument_spec.update(clone=dict(type='str'),
+ state=dict(type='str', choices=['present', 'query']),
)
@@ -125,11 +120,9 @@ def main():
meraki.function = 'organizations'
meraki.params['follow_redirects'] = 'all'
- meraki.required_if=[
- ['state', 'present', ['name']],
- ['clone', ['name']],
- # ['vpn_PublicIP', ['name']],
- ]
+ meraki.required_if = [['state', 'present', ['name']],
+ ['clone', ['name']],
+ ]
create_urls = {'organizations': '/organizations',
}
@@ -162,23 +155,16 @@ def main():
-
- # method = None
- # org_id = None
-
-
- # meraki.fail_json(msg=meraki.is_org_valid(meraki.get_orgs(), org_name='AnsibleTestOrg'))
-
if meraki.params['state'] == 'query':
- if meraki.params['name'] is None: # Query all organizations, no matter what
- orgs = meraki.get_orgs()
- meraki.result['organization'] = orgs
- elif meraki.params['name'] is not None: # Query by organization name
- module.warn('All matching organizations will be returned, even if there are duplicate named organizations')
- orgs = meraki.get_orgs()
- for o in orgs:
- if o['name'] == meraki.params['name']:
- meraki.result['organization'] = o
+ if meraki.params['name'] is None: # Query all organizations, no matter what
+ orgs = meraki.get_orgs()
+ meraki.result['organization'] = orgs
+ elif meraki.params['name'] is not None: # Query by organization name
+ module.warn('All matching organizations will be returned, even if there are duplicate named organizations')
+ orgs = meraki.get_orgs()
+ for o in orgs:
+ if o['name'] == meraki.params['name']:
+ meraki.result['organization'] = o
elif meraki.params['state'] == 'present':
if meraki.params['clone'] is not None: # Cloning
payload = {'name': meraki.params['name']}
@@ -193,7 +179,10 @@ def main():
payload = {'name': meraki.params['name'],
'id': meraki.params['org_id'],
}
- meraki.result['response'] = json.loads(meraki.request(meraki.construct_path('update', org_id=meraki.params['org_id']), payload=json.dumps(payload), method='PUT'))
+ meraki.result['response'] = json.loads(meraki.request(meraki.construct_path('update',
+ org_id=meraki.params['org_id']),
+ payload=json.dumps(payload),
+ method='PUT'))
diff --git a/lib/ansible/utils/module_docs_fragments/meraki.py b/lib/ansible/utils/module_docs_fragments/meraki.py
index e268d02e68..3569d83b99 100644
--- a/lib/ansible/utils/module_docs_fragments/meraki.py
+++ b/lib/ansible/utils/module_docs_fragments/meraki.py
@@ -35,6 +35,7 @@ options:
description:
- Set amount of debug output during module execution
choices: ['normal', 'debug']
+ default: 'normal'
timeout:
description:
- Time to timeout for HTTP requests.
diff --git a/test/integration/targets/meraki_organization/aliases b/test/integration/targets/meraki_organization/aliases
new file mode 100644
index 0000000000..ad7ccf7ada
--- /dev/null
+++ b/test/integration/targets/meraki_organization/aliases
@@ -0,0 +1 @@
+unsupported
* Formatting fix
* Minor updates due to testing
- Made state required again
- Improved formatting for happier PEP8
- request() now sets instance method
* Fix reporting of the result
* Enhance idempotency checks
- Remove merging functionality as the proposed should be used
- Do check and reverse check to look for differences
* Rewrote and added additional integration tests. This isn't done.
* Updated is_update_required method:
- Original and proposed data is passed to method
- Added ignored_keys list so it can be skipped if needed
* Changes per comments from dag
- Optionally assign function on class instantiation
- URLs now have {} for substitution method
- Move auth_key check to module utility
- Remove is_new and get_existing
- Minor changes to documentation
* Enhancements for future modules and organization
- Rewrote construct_path method for simplicity
- Increased support for network functionality to be committed
* Changes based on Dag feedback and to debug problems
* Minor fixes for validitation testing
* Small changes for dag and Ansibot
- Changed how auth_key is processed
- Removed some commented lines
- Updated documentation fragment, but that may get reverted
* Remove blank line and comment
* Improvements for testing and code simplification
- Added network integration tests
- Modified error handling in request()
- More testing to come on this
- Rewrote construct_path again. Very simple now.
* Remove trailing whitespace
* Small changes based on dag's response
* Removed certain sections from exit_json and fail_json as they're old
* Adding initial skeleton of VMWare docs
* Updated product name capitaliztion; ready for initial PR.
* Add few files and updated some links
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fixed duplicate anchor tag
Updated GitHub Repos section to better explain what ansible-network@redhat.com is for (not an email list, but adding to the network-automation github repo.
* should not need <>, but fails without
* adds anchor to keywords page, uses it on plugins pages
* fixes envvar link errors
* harmonize file name and ref name as python_3
* removes undefined-lable from ignore list
* Update the documentation to list Python 3 as official
* Add some reference targets for inventory variables so we can link to docs
* Add a platform FAQ section
Populate it with
* virtualenv info (previously on the python3 support page)
* BSD (Link to the working with BSD page)
* Solaris (Document how to work around the non-POSIX shell on some
Solaris hosts)
Fixes#21594
* Fix some refs in the release_and_maintenance document
* Fix unindent error in module template
Fix for the module/plugin template unintentionally unindented inside of
a raw block, leading to errors like:
ERROR: docs/docsite/rst/modules/redshift_facts_module.rst:289:0: Explicit markup ends without a blank line; unexpected unindent.
* Make wording for Solaris troubleshooting better.
The big one is that we needed to set plugin_type when we processed the by_support template.
Also added to list_of_CATEGORY_plugins page (which might not be used)
and corrected a place where I did module_name instead of name_module
The regex to find labels inside of angle brackets was not detecting
anything before so I missed all of those.
* Fixed the regex in find-plugin-refs to take care of that.
* Fixed plugin_formatter to emit namespaced labels for the M() macro.
We're porting autogenerated plugin docs so that :ref: targets are
namespaced by plugin type. To do this effectively, we need to know
where all the :ref: targets which refer to the bare plugin names are in
the rst files. This script will find those.
* centralize doc/config plugin lists
also update list for generation in docsite
added note to ensure they are in sync
* updated shell page to list plugins
added some more docs hinting at plugins being configurable
* fix edit link for plugins
The :ref: syntax is for linking to targets which are defined for the
whole document tree. `link`_ is for linking to targets which are inside
of the document. We want the latter for deprecated sections because
otherwise we'd have to create namespaced link targets for them.
Also fix expansion of version a deprecated module will be removed in
* docs: Document disabling diff on task level
Tasks that deal with secrets may leak sensitive information when
running in Check Mode. This change updates the documentation explaining
that the diff can be deactivated on task level.
The feature was requested in #14860 and got introduced in Ansible 2.4
with #28581.
* Updated for clarity
The example regarding `include_*` is a bit unclear. First it seems like the v2.4 and v2.5 examples are the same. So I attempted to make the relevant change in the examples more obvious.
label: docsite_pr
I hastily did a copy/paste of the `async` example and it took me
a while to understand that `async` specified a maximum runtime in seconds.
The docs are actually mostly clear on this, but I made this PR while
reading the code.
This also fixes the spelling of "asynchronously".
* Use arg_spec type for comparisons on default and choices
* Further improve type casting
* Make sure to capture output in more places
* Individually report invalid choices
* Update ignore.txt after resolving merge conflicts
* Correct method to get timedelta seconds value
This also adds additional clarification for extracting different time/date values for time deltas
* Small edit
This PR includes:
- A fix for multiple-choice defaults
- A fix for messed up dictionary samples
- Cleaner defaults when they don't appear part of choices
* Improve default values and choices in module docs
So currently we show defaults and choices in separate columns.
For each parameter we have
- Mostly empty default and choices cells
- A list of choices and a separate default value
- Only a default value
So there's a lot of space being wasted on empty cells.
We can do this better.
* Improve Parameters section
* Add Choices back into column header
* Ensure the tables spans the complete page width
* allow ANSIBLE_KEEP_REMOTE_FILES for local test runner
* add ANSIBLE_KEEP_REMOTE_FILES to tox.ini, update docs
* Clarify handling of environment variables.
* Improve module docs return values
Currently the 5 columns shown doesn't make optimal use of the screen
estate, especially for facts modules this is a problem.
* Add returned facts as a separate section
* Remove whitespace and add support section
Since Notes were moved higher up, the Author, Status and Maintainer
information was now placed under the Return Values section.
* Switch Last Updated and Copyright
* Remove Sphinx/Read-the-Docs plug on every doc page
No need to have this on every page.
This fixes#37021
* Reinstated RTD credit with revised wording.
* Re-removed RTD footer boilerplate.
* Make use of named links in documentation notes
Now that it is possible to name external links, we are making use of
this to make the documentation better.
* Add improvements to ACI documentation
* Disable QA for long line
* Add :menuselection: and :guilabel:
* Improve links on some modules
* Adds the ability to override the doc build output from the command line.
* For safety, removed straight rm of BUILDDIR and removed subdirectories instead.
* Added check to see if BUILDDIR was defined to main makefile
* Automatically stuff reference in commit message
So we probably want to track which edits were performed through the
Github interface, and this change automatically adds a label to the
commit message.
```yaml
<!--- Your description here -->
+label: docsite_pr
```
Eventually this allows to (on regular basis) list the changes from
documentation readers and process them in a separate process.
So I am still not satisfied with how required parameters are being
displayed (before it was yes/no, then it became required/optional, and
only required).
Now it will display in small green 'required' under the parameter name.
This is more convenient, and provides more room for the description.
Especially on smaller screens.
So people reading the module documentation usually look for parameters
first, and are interested in examples. However the notes are at the very
end even below the Return Values (the least interesting part).
So this change moves the notes higher up, below parameters, but before
examples so people at least see the notes.
* Explain what the Ansible Quickstart video does
Rewrote what video does. The video is really not teaching you how to do the work. It explains why you'd want to use Ansible and shows you what it takes (some sample code) . Video also introduces you to other products in the Ansible ecosystem.
* Edit
* Workaround for non-string values
So I think the proper fix should go into html_ify, which should convert
any value into a string, rather than expecting strings only.
* My preferred solution
This PR includes:
- Indentation of Jinja constructs
- Put parameter name in bold
- Title-case table headers
- Show 'required' when parameter is required (not yes/no)
- Left-align all values
This PR includes:
- An improvement to the parameter listing, where instead of yes/no, it
is indicated with required/optional (easier when scrolling through a
long list of parameters)
- Ensure that module reference, eg. M(foobar) do not include the module
document title
This PR includes:
- A fix to untemplated {{ plugin_type }} in docs
- Remove the additional info on how to edit module docs (see #36667)
- Add missing delimiter
This is something I always wanted, a 'Edit on GitHub' button for module
documentation.
I also removed the additional statement in the footer with instructions
on how to edit the module documentation.
PS The links go directly into the GitHub file editor now !
* Fixed indentation error in `facts-demo.yml` example.
`content` and `dest` should be indented under the `copy` module.
* Updated indentation of copy module in `facts-demo.yml` example.
Updated indentation of copy module in `facts-demo.yml` to be inline with its name.
* Add anchors to some guides and all module categories
This is required if we want to use *absolute* :ref: references instead of *relative* :doc: references.
* Update the Cisco ACI Guide reference
* Add `aci_guide` anchor
* Add `network_guide` anchor
* Add category anchor
* Improve readability
* Fix small typo
* Add instructions for creating backport PRs
* Update development_process.rst
simpler workflow
* Update development_process.rst
added origin note
* A few adjustments to clarity, use backport instead of cherry pick in branch name
* Address formatting issue
* fetch isn't a flag
* Fix rst formatting
After initializing a list in both Python2/Python3 with below elements,
I've tested the indexing and realised that the examples provided in the
documentation are erroneous.
As a result, update the examples with correct values in order to avoid
any future confusion.
Resolves:
Related:
Signed-off-by: Daniel Andrei Minca <mandrei17@gmail.com>
* ACI: Various changes to module documentation and guide
This PR includes:
- We moved the object class information to the notes
- Add version information to guide chapters
- Add generic note to modules with reference to ACI guide
- Reference known issues in aci_rest documentation
- Remove module_utils function docs from modules
- Indicate which parameters are not required for querying all objects
- Added missing RETURN information
* Fix copyright strings
* Remove aci_domain_to_encap_pool.py for v2.5
* More updates
* PEP8 fix
* Improve listings of parameters/return values
* Update network debug troubleshooting guide
Fix#35914
Command timeout and connection timeout error messages
are dsiplayed in log file instead on console.
Update the same in troubleshooting guide.
* Update example error
* Fix CI issues
* Fix more CI failures
* More fixes
* Fix review comments
* Fix more review comments
* Copy edit
This PR includes:
- A fix for a recently introduced issue wrt. error handling
- Added integration tests for provoked errors
- Influence standard return values using aci library for aci_rest
- Add proxy support documentation
- Documentation update related to #34175
* added support for --testcase flag in ansible-test
* fixed command format
* added tab completion
* fixed sanity issues
* added documenation for --testcase
* don't autocomplete when multiple modules are selected
* Followup to docs refactor pull request #36067 - fixes gitignore and cleanup in makefile; removes some generated files; moves a straggler to the appropriate subdirectory.
* Fixed some stragglers
* Removed redundant module entries
* Delete generated RST files.
* Docs refactor as outlined in https://github.com/ansible/proposals/issues/79. Moves content into 'guides'; refactors TOC; fixes CSS; design tweaks to layout and CSS; fixes generated plugin, CLI and module docs to fix links accodingly; more.
* Adding extra blank line for shippable
Since we pass information directly to ACI, we sometimes get error messages back to the user that require some additional information or context.
This PR includes:
- Changes to the default error output so the error is easier to find
when searching in e.g. Google
- 3 specific error messages that we have encountered and has confused
our users before
* Change wording of Going Further section
The original wording was confusing with its non-devel branch part.
Made it much clearer for people to understand what to do.
Also removed the git command for creating branches, I believe a
develop should be aware of how basic git commands work.
* Edited for concision and clarity.
* Typo fix
* Typo fix
* Assorted set of fixes
* Cosmetic changes to lists
* Add more information related to connection throttling
* Changes to TOC
* Document return values
* More improvements
* Fix casing in title
Lars Kellogg-Stedman