Track endpoints internally with a new tailcfg.Endpoint type that
includes a typed netaddr.IPPort (instead of just a string) and
includes a type for how that endpoint was discovered (STUN, local,
etc).
Use []tailcfg.Endpoint instead of []string internally.
At the last second, send it to the control server as the existing
[]string for endpoints, but also include a new parallel
MapRequest.EndpointType []tailcfg.EndpointType, so the control server
can start filtering out less-important endpoint changes from
new-enough clients. Notably, STUN-discovered endpoints can be filtered
out from 1.6+ clients, as they can discover them amongst each other
via CallMeMaybe disco exchanges started over DERP. And STUN endpoints
change a lot, causing a lot of MapResposne updates. But portmapped
endpoints are worth keeping for now, as they they work right away
without requiring the firewall traversal extra RTT dance.
End result will be less control->client bandwidth. (despite negligible
increase in client->control bandwidth)
Updates tailscale/corp#1543
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
They were scattered/duplicated in misc places before.
It can't be in the client package itself for circular dep reasons.
This new package is basically tailcfg but for localhost
communications, instead of to control.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This changes the behavior of "tailscale up".
Previously "tailscale up" always did a new Start and reset all the settings.
Now "tailscale up" with no flags just brings the world [back] up.
(The opposite of "tailscale down").
But with flags, "tailscale up" now only is allowed to change
preferences if they're explicitly named in the flags. Otherwise it's
an error. Or you need to use --reset to explicitly nuke everything.
RELNOTE=tailscale up change
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some paths already didn't. And in the future I hope to shut all the
notify funcs down end-to-end when nothing is connected (as in the
common case in tailscaled). Then we can save some JSON encoding work.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We've been slowly making Start less special and making IPN a
multi-connection "watch" bus of changes, but this Start specialness
had remained.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
With this change, all OSes can sort-of do split DNS, except that the
default upstream is hardcoded to 8.8.8.8 pending further plumbing.
Additionally, Windows 8-10 can do split DNS fully correctly, without
the 8.8.8.8 hack.
Part of #953.
Signed-off-by: David Anderson <danderson@tailscale.com>
We already had SetNotifyCallback elsewhere on controlclient, so use
that name.
Baby steps towards some CLI refactor work.
Updates tailscale/tailscale#1436
The common Linux start-up path (fallback file defined but not
existing) was missing the log print of initializing Prefs. The code
was too twisty. Simplify a bit.
Updates #1573
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's currently unused, and no longer makes sense with the upcoming
DNS infrastructure. Keep it in tailcfg for now, since we need protocol
compat for a bit longer.
Signed-off-by: David Anderson <danderson@tailscale.com>
The resolver still only supports a single upstream config, and
ipn/wgengine still have to split up the DNS config, but this moves
closer to unifying the DNS configs.
As a handy side-effect of the refactor, IPv6 MagicDNS records exist
now.
Signed-off-by: David Anderson <danderson@tailscale.com>
This adds a new ipn.MaskedPrefs embedding a ipn.Prefs, along with a
bunch of "has bits", kept in sync with tests & reflect.
Then it adds a Prefs.ApplyEdits(MaskedPrefs) method.
Then the ipn.Backend interface loses its weirdo SetWantRunning(bool)
method (that I added in 483141094c for "tailscale down")
and replaces it with EditPrefs (alongside the existing SetPrefs for now).
Then updates 'tailscale down' to use EditPrefs instead of SetWantRunning.
In the future, we can use this to do more interesting things with the
CLI, reconfiguring only certain properties without the reset-the-world
"tailscale up".
Updates #1436
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were going to remove this in Tailscale 1.3 but forgot.
This means Tailscale 1.8 users won't be able to downgrade to Tailscale
1.0, but that's fine.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adding a subcommand which prints and logs a log marker. This should help
diagnose any issues that users face.
Fixes#1466
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Instead of having the CLI check whether IP forwarding is enabled, ask
tailscaled. It has a better idea. If it's netstack, for instance, the
sysctl values don't matter. And it's possible that only the daemon has
permission to know.
Fixes#1626
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For discovery when an explicit hostname/IP is known. We'll still
also send it via control for finding peers by a list.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
IPv4 and IPv6 both work remotely, but IPv6 doesn't yet work from the
machine itself due to routing mysteries.
Untested yet on iOS, but previous prototype worked on iOS, so should
work the same.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
"public IP" is defined as an IP address configured on the exit node
itself that isn't in the list of forbidden ranges (RFC1918, CGNAT,
Tailscale).
Fixes#1522.
Signed-off-by: David Anderson <danderson@tailscale.com>
Windows was only running the localapi on the debug port which was a
stopgap at the time while doing peercreds work. Removed that, and
wired it up correctly, with some more docs.
More clean-up to do after 1.6, moving the localhost TCP auth code into
the peercreds package. But that's too much for now, so the docs will
have to suffice, even if it's at a bit of an awkward stage with the
newly-renamed "NotWindows" field, which still isn't named well, but
it's better than its old name of "Unknown" which hasn't been accurate
since unix sock peercreds work anyway.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And if we have over 10,000 CGNAT routes, just route the entire
CGNAT range. (for the hello test server)
Fixes#1450
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prior to e3df29d488, the Engine.SetLinkChangeCallback fired
immediately, even if there was no change. The ipnlocal code apparently
depended on that, and it broke integration tests (which live in
another repo). So mimic the old behavior and call the ipnlocal
callback immediately at init.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Gets it out of wgengine so the Engine isn't responsible for being a
callback registration hub for it.
This also removes the Engine.LinkChange method, as it's no longer
necessary. The monitor tells us about changes; it doesn't seem to
need any help. (Currently it was only used by Swift, but as of
14dc790137 we just do the same from Go)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And add a --socks5-server flag.
And fix a race in SOCKS5 replies where the response header was written
concurrently with the copy from the backend.
Co-authored with Naman Sood.
Updates #707
Updates #504
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
UIs need to see the full unedited netmap in order to know what exit nodes they
can offer to the user.
Signed-off-by: David Anderson <danderson@tailscale.com>
And open up socket permissions like Linux, now that we know who
connections are from.
This uses the new inet.af/peercred that supports Linux and Darwin at
the moment.
Fixes#1347Fixes#1348
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If no exit node is specified, the filter must still run to remove
offered default routes from all peers.
Signed-off-by: David Anderson <danderson@tailscale.com>
This one alone doesn't modify the global dependency map much
(depaware.txt if anything looks slightly worse), but it leave
controlclient as only containing NetworkMap:
bradfitz@tsdev:~/src/tailscale.com/ipn$ grep -F "controlclient." *.go
backend.go: NetMap *controlclient.NetworkMap // new netmap received
fake_test.go: b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
fake_test.go: b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
handle.go: netmapCache *controlclient.NetworkMap
handle.go:func (h *Handle) NetMap() *controlclient.NetworkMap {
Once that goes into a leaf package, then ipn doesn't depend on
controlclient at all, and then the client gets smaller.
Updates #1278
And move a couple other types down into leafier packages.
Now cmd/tailscale doesn't bring in netlink, magicsock, wgengine, etc.
Fixes#1181
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Use tb.Cleanup to simplify both the API and the implementation.
One behavior change: When the number of goroutines shrinks, don't log.
I've never found these logs to be useful, and they frequently add noise.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This is mostly code movement from the wireguard-go repo.
Most of the new wgcfg package corresponds to the wireguard-go wgcfg package.
wgengine/wgcfg/device{_test}.go was device/config{_test}.go.
There were substantive but simple changes to device_test.go to remove
internal package device references.
The API of device.Config (now wgcfg.DeviceConfig) grew an error return;
we previously logged the error and threw it away.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This adds a new IP Protocol type, TSMP on protocol number 99 for
sending inter-tailscale messages over WireGuard, currently just for
why a peer rejects TCP SYNs (ACL rejection, shields up, and in the
future: nothing listening, something listening on that port but wrong
interface, etc)
Updates #1094
Updates tailscale/corp#1185
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This partially reverts d6e9fb1df0, which modified the permissions
on the tailscaled Unix socket and thus required "sudo tailscale" even
for "tailscale status".
Instead, open the permissions back up (on Linux only) but have the
server look at the peer creds and only permit read-only actions unless
you're root.
In the future we'll also have a group that can do mutable actions.
On OpenBSD and FreeBSD, the permissions on the socket remain locked
down to 0600 from d6e9fb1df0.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Not usefully functional yet (mostly a proof of concept), but getting
it submitted for some work @namansood is going to do atop this.
Updates #707
Updates #634
Updates #48
Updates #835
* show DNS name over hostname, removing domain's common MagicDNS suffix.
only show hostname if there's no DNS name.
but still show shared devices' MagicDNS FQDN.
* remove nerdy low-level details by default: endpoints, DERP relay,
public key. They're available in JSON mode still for those who need
them.
* only show endpoint or DERP relay when it's active with the goal of
making debugging easier. (so it's easier for users to understand
what's happening) The asterisks are gone.
* remove Tx/Rx numbers by default for idle peers; only show them when
there's traffic.
* include peers' owner login names
* add CLI option to not show peers (matching --self=true, --peers= also
defaults to true)
* sort by DNS/host name, not public key
* reorder columns
If any goroutine continues to use the logger in TestLocalLogLines
after the test finishes, the test panics.
The culprit for this was wireguard-go; the previous commit fixed that.
This commit adds suspenders: When the test is done, make logging calls
into no-ops.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Previously the client had heuristics to calculate which DNS search domains
to set, based on the peers' names. Unfortunately that prevented us from
doing some things we wanted to do server-side related to node sharing.
So, bump MapRequest.Version to 9 to signal that the client only uses the
explicitly configured DNS search domains and doesn't augment it with its own
list.
Updates tailscale/corp#1026
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is a replacement for the key-related parts
of the wireguard-go wgcfg package.
This is almost a straight copy/paste from the wgcfg package.
I have slightly changed some of the exported functions and types
to avoid stutter, added and tweaked some comments,
and removed some now-unused code.
To avoid having wireguard-go depend on this new package,
wgcfg will keep its key types.
We translate into and out of those types at the last minute.
These few remaining uses will be eliminated alongside
the rest of the wgcfg package.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Addresses #964
Still to be done:
- Figure out the correct logging lines in util/systemd
- Figure out if we need to slip the systemd.Status function anywhere
else
- Log util/systemd errors? (most of the errors are of the "you cannot do
anything about this, but it might be a bad idea to crash the program if
it errors" kind)
Assistance in getting this over the finish line would help a lot.
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: rename the nonlinux file to appease the magic
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: fix package name
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: fix review feedback from @mdlayher
Signed-off-by: Christine Dodrill <me@christine.website>
cmd/tailscale{,d}: update depaware manifests
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: use sync.Once instead of func init
Signed-off-by: Christine Dodrill <me@christine.website>
control/controlclient: minor review feedback fixes
Signed-off-by: Christine Dodrill <me@christine.website>
{control,ipn,systemd}: fix review feedback
Signed-off-by: Christine Dodrill <me@christine.website>
review feedback fixes
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: fix sprintf call
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: make staticcheck less sad
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: print IP address in connected status
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: review feedback
Signed-off-by: Christine Dodrill <me@christine.website>
final fixups
Signed-off-by: Christine Dodrill <me@christine.website>
It appears some users have corrupted pref.conf files. Have LoadPrefs
treat these files as non-existent. This way tailscale will make user
login, and not crash.
Fixes#954
Signed-off-by: Alex Brainman <alex.brainman@gmail.com>
In 1.0, subnet relays were not specially handled when WPAD+PAC was
present on the network.
In 1.2, on Windows, subnet relays were disabled if WPAD+PAC was
present. That was what some users wanted, but not others.
This makes it configurable per domain, reverting back to the 1.0
default state of them not being special. Users who want that behavior
can then enable it.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We still use the packet.* alloc-free types in the data path, but
the compilation from netaddr to packet happens within the filter
package.
Signed-off-by: David Anderson <danderson@tailscale.com>
Seeing "frontend-provided legacy machine key" was weird (and not quite
accurate) on Linux machines where it comes from the _daemon key's
persist prefs, not the "frontend".
Make the log message distinguish between the cases.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When the service was running without a client (e.g. after a reboot)
and then the owner logs in and the GUI attaches, the computed state
key changed to "" (driven by frontend prefs), and then it was falling
out of server mode, despite the GUI-provided prefs still saying it
wanted server mode.
Also add some logging. And remove a scary "Access denied" from a
user-visible error, making the two possible already-in-use error
messages consistent with each other.
On Windows, we were previously treating a server used by different
users as a fatal error, which meant the second user (upon starting
Tailscale, explicitly or via Start Up programs) got an invasive error
message dialog.
Instead, give it its own IPN state and change the Notify.ErrMessage to
be details in that state. Then the Windows GUI can be less aggresive
about that happening.
Also,
* wait to close the IPN connection until the server ownership state
changes so the GUI doesn't need to repeatedly reconnect to discover
changes.
* fix a bug discovered during testing: on system reboot, the
ipnserver's serverModeUser was getting cleared while the state
transitioned from Unknown to Running. Instead, track 'inServerMode'
explicitly and remove the old accessor method which was error prone.
* fix a rare bug where the client could start up and set the server
mode prefs in its Start call and we wouldn't persist that to the
StateStore storage's prefs start key. (Previously it was only via a
prefs toggle at runtime)
os.IsNotExist doesn't unwrap errors. errors.Is does.
The ioutil.ReadFile ones happened to be fine but I changed them so
we're consistent with the rule: if the error comes from os, you can
use os.IsNotExist, but from any other package, use errors.Is.
(errors.Is always would also work, but not worth updating all the code)
The motivation here was that we were logging about failure to migrate
legacy relay node prefs file on startup, even though the code tried
to avoid that.
See golang/go#41122
It was especially bad on our GUI platforms with a frontend that polls it.
No need to log it every few seconds if it's unchanged. Make it slightly
less allocate-y while I'm here.
If we can't find the mapping from SID ("user ID") -> username, don't
treat that as a fatal. Apparently that happens in the wild for Reasons.
Ignore it for now. It's just a nice-to-have for error messages in the
rare multi-user case.
Updates #869
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When building with redo, also include the git commit hash
from the proprietary repo, so that we have a precise commit
that identifies all build info (including Go toolchain version).
Add a top-level build script demonstrating to downstream distros
how to burn the right information into builds.
Adjust `tailscale version` to print commit hashes when available.
Fixes#841.
Signed-off-by: David Anderson <danderson@tailscale.com>
Also replaces the IPv6Overlay bool with use of DebugFlags, since
it's currently an experimental configuration.
Signed-off-by: David Anderson <danderson@tailscale.com>
We were creating the controlclient and starting the portpoll concurrently,
which frequently resulted in the first controlclient connection being canceled
by the firsdt portpoll result ~milliseconds later, resulting in another
HTTP request.
Instead, wait a bit for the first portpoll result so it's much less likely to
interrupt our controlclient connection.
Updates tailscale/corp#557
This partially (but not yet fully) migrates Windows to tailscaled's
StateStore storage system.
This adds a new bool Pref, ForceDaemon, defined as:
// ForceDaemon specifies whether a platform that normally
// operates in "client mode" (that is, requires an active user
// logged in with the GUI app running) should keep running after the
// GUI ends and/or the user logs out.
//
// The only current applicable platform is Windows. This
// forced Windows to go into "server mode" where Tailscale is
// running even with no users logged in. This might also be
// used for macOS in the future. This setting has no effect
// for Linux/etc, which always operate in daemon mode.
Then, when ForceDaemon becomes true, we now write use the StateStore
to track which user started it in server mode, and store their prefs
under that key.
The ipnserver validates the connections/identities and informs that
LocalBackend which userid is currently in charge.
The GUI can then enable/disable server mode at runtime, without using
the CLI.
But the "tailscale up" CLI was also fixed, so Windows users can use
authkeys or ACL tags, etc.
Updates #275
It was previously possible for two different Windows users to connect
to the IPN server at once, but it didn't really work. They mostly
stepped on each other's toes and caused chaos.
Now only one can control it, but it can be active for everybody else.
Necessary dependency step for Windows server/headless mode (#275)
While here, finish wiring up the HTTP status page on Windows, now that
all the dependent pieces are available.
If no interfaces are up, calm down and stop spamming so much. It was
noticed as especially bad on Windows, but probably was bad
everywhere. I just have the best network conditions testing on a
Windows VM.
Updates #604
So previous routes aren't shadowing resources that the operating
system might need (Windows Domain Controller, DNS server, corp HTTP
proxy, WinHTTP fetching the PAC file itself, etc).
This effectively detects when we're transitioning from, say, public
wifi to corp wifi and makes Tailscale remove all its routes and stops
its TCP connections and tries connecting to everything anew.
Updates tailscale/corp#653
We depend on DERP for NAT traversal now[0] so disabling it entirely can't
work.
What we'll do instead in the future is let people specify
alternate/additional DERP servers. And perhaps in the future we could
also add a pref for nodes to say when they expect to never need/want
to use DERP for data (but allow it for NAT traversal communication).
But this isn't the right pref and it doesn't work, so delete it.
Fixes#318
[0] https://tailscale.com/blog/how-nat-traversal-works/
It's properly handled later in tsdns.NewMap anyway, but there's work
done in the meantime that can be skipped when a peer lacks a DNS name.
It's also more clear that it's okay for it to be blank.
Also remove rebinding logic from the windows router. Magicsock will
instead rebind based on link change signals.
Signed-off-by: David Anderson <danderson@tailscale.com>
The test's LocalBackend was not shut down (Shutdown both releases
resources and waits for its various goroutines to end). This should
fix the test race we were seeing. It definitely fixes the file
descriptor leak that preventing -race -count=500 from passing before.
Start of making the IPN state machine react to link changes and down
its DNS & routes if necessary to unblock proxy resolution (e.g. for
transitioning from public to corp networks where the corp network has
mandatory proxies and WPAD PAC files that can't be resolved while
using the DNS/routes configured previously)
This change should be a no-op. Just some callback plumbing.
For example:
$ tailscale ping -h
USAGE
ping <hostname-or-IP>
FLAGS
-c 10 max number of pings to send
-stop-once-direct true stop once a direct path is established
-verbose false verbose output
$ tailscale ping mon.ts.tailscale.com
pong from monitoring (100.88.178.64) via DERP(sfo) in 65ms
pong from monitoring (100.88.178.64) via DERP(sfo) in 252ms
pong from monitoring (100.88.178.64) via [2604:a880:2:d1::36:d001]:41641 in 33ms
Fixes#661
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also, bit of behavior change: on non-nil err but expired context,
don't reset the consecutive failure count. I don't think the old
behavior was intentional.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
tailscaled receives a SIGPIPE when CLIs disconnect from it. We shouldn't
shut down in that case.
This reverts commit 43b271cb26.
Signed-off-by: David Anderson <danderson@tailscale.com>
ORder of operations to trigger a problem:
- Start an already authed tailscaled, verify you can ping stuff.
- Run `tailscale up`. Notice you can no longer ping stuff.
The problem is that `tailscale up` stops the IPN state machine before
restarting it, which zeros out the packet filter but _not_ the packet
filter hash. Then, upon restarting IPN, the uncleared hash incorrectly
makes the code conclude that the filter doesn't need updating, and so
we stay with a zero filter (reject everything) for ever.
The fix is simply to update the filterHash correctly in all cases,
so that running -> stopped -> running correctly changes the filter
at every transition.
Signed-off-by: David Anderson <danderson@tailscale.com>
We need to emit Prefs when it *has* changed, not when it hasn't.
Test is added in our e2e test, separately.
Fixes: #620
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
So a backend in server-an-error state (as used by Windows) can try to
create a new Engine again each time somebody re-connects, relaunching
the GUI app.
(The proper fix is actually fixing Windows issues, but this makes things better
in the short term)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This prevents hostname being forced to os.Hostname despite override
when control is contacted for the first time after starting tailscaled.
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
The StartLoginInteractive command is for delegating the sign-in flow
to a browser. The Android Gooogle Sign-In SDK inverts the flow by
giving the client ID tokens.
Add a new backend command for accepting such tokens by exposing the existing
controlclient.Client.Login support for OAuth2 tokens. Introduce a custom
TokenType to distinguish ID tokens from other OAuth2 tokens.
Signed-off-by: Elias Naur <mail@eliasnaur.com>
We want the macOS Network Extension to share fate with the UI frontend,
so we need the backend to know when the frontend disappears.
One easy way to do that is to reuse the existing TCP server it's
already running (for tailscale status clietns).
We now tell the frontend our ephemeral TCP port number, and then have
the UI connect to it, so the backend can know when it disappears.
There are likely Swift ways of doing this, but I couldn't find them
quickly enough, so I reached for the hammer I knew.
This change adds to tsdns the ability to delegate lookups to upstream nameservers.
This is crucial for setting Magic DNS as the system resolver.
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
There's a lot of confusion around what tailscale status shows, so make it better:
show region names, last write time, and put stars around DERP too if active.
Now stars are always present if activity, and always somewhere.
It's just a config wrapper that passes "use less memory at the
expense of compression" parameters by default, so that we don't
accidentally construct resource-hungry (de)compressors.
Also includes a benchmark that measures the memory cost of the
small variants vs. the stock variants. The savings are significant
on both compressors (~8x less memory) and decompressors (~1.4x less,
not including the savings from the significantly smaller
window on the compression side - with those savings included it's
more like ~140x smaller).
BenchmarkSmallEncoder-8 56174 19354 ns/op 31 B/op 0 allocs/op
BenchmarkSmallEncoderWithBuild-8 2900 382940 ns/op 1746547 B/op 36 allocs/op
BenchmarkStockEncoder-8 48921 25761 ns/op 286 B/op 0 allocs/op
BenchmarkStockEncoderWithBuild-8 426 2630241 ns/op 13843842 B/op 124 allocs/op
BenchmarkSmallDecoder-8 123814 9344 ns/op 0 B/op 0 allocs/op
BenchmarkSmallDecoderWithBuild-8 41547 27455 ns/op 27694 B/op 31 allocs/op
BenchmarkStockDecoder-8 129832 9417 ns/op 1 B/op 0 allocs/op
BenchmarkStockDecoderWithBuild-8 25561 51751 ns/op 39607 B/op 92 allocs/op
Signed-off-by: David Anderson <danderson@tailscale.com>
This adds a new magicsock endpoint type only used when both sides
support discovery (that is, are advertising a discovery
key). Otherwise the old code is used.
So far the new code only communicates over DERP as proof that the new
code paths are wired up. None of the actually discovery messaging is
implemented yet.
Support for discovery (generating and advertising a key) are still
behind an environment variable for now.
Updates #483
Later we'll want to use the presence of a discovery key as a signal
that the node knows how to participate in discovery. Currently the
code generates keys and sends them to the control server but doesn't
do anything with them, which is a bad state to stay in lest we release
this code and end up with nodes in the future that look like they're
functional with the new discovery protocol but aren't.
So for now, make this opt-in as a debug option for now, until the rest
of it is in.
Updates #483
The zstd library treats that limit as a hard cap on decompressed
size, in the mode we're using it, rather than a window size.
Signed-off-by: David Anderson <danderson@tailscale.com>
Overriding the hostname is required for Android, where os.Hostname
is often just "localhost".
Updates #409
Signed-off-by: Elias Naur <mail@eliasnaur.com>
This removes the use of suppress_ifgroup and fwmark "x/y" notation,
which are, among other things, not available in busybox and centos6.
We also use the return codes from the 'ip' program instead of trying to
parse its output.
I also had to remove the previous hack that routed all of 100.64.0.0/10
by default, because that would add the /10 route into the 'main' route
table instead of the new table 88, which is no good. It was a terrible
hack anyway; if we wanted to capture that route, we should have
captured it explicitly as a subnet route, not as part of the addr. Note
however that this change affects all platforms, so hopefully there
won't be any surprises elsewhere.
Fixes#405
Updates #320, #144
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Instead of hard-coding the DERP map (except for cmd/tailscale netcheck
for now), get it from the control server at runtime.
And make the DERP map support multiple nodes per region with clients
picking the first one that's available. (The server will balance the
order presented to clients for load balancing)
This deletes the stunner package, merging it into the netcheck package
instead, to minimize all the config hooks that would've been
required.
Also fix some test flakes & races.
Fixes#387 (Don't hard-code the DERP map)
Updates #388 (Add DERP region support)
Fixes#399 (wgengine: flaky tests)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The compressed blobs we send back and forth are small and infrequent,
which doesn't justify the 8MB * GOMAXPROCS memory that was being
allocated. This was the overwhelming majority of memory use in
tailscaled. On my system it goes from ~100M RSS to ~15M RSS (which is
still suspiciously high, but we can worry about that more later).
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Also stop logging data sent/received from nodes we're not connected to (ie all those `x`s being logged in the `peers: ` line)
Signed-off-by: Wendi <wendi.yu@yahoo.ca>
If a test calls log.Printf, 'go test' horrifyingly rearranges the
output to no longer be in chronological order, which makes debugging
virtually impossible. Let's stop that from happening by making
log.Printf panic if called from any module, no matter how deep, during
tests.
This required us to change the default error handler in at least one
http.Server, as well as plumbing a bunch of logf functions around,
especially in magicsock and wgengine, but also in logtail and backoff.
To add insult to injury, 'go test' also rearranges the output when a
parent test has multiple sub-tests (all the sub-test's t.Logf is always
printed after all the parent tests t.Logf), so we need to screw around
with a special Logf that can point at the "current" t (current_t.Logf)
in some places. Probably our entire way of using subtests is wrong,
since 'go test' would probably like to run them all in parallel if you
called t.Parallel(), but it definitely can't because the're all
manipulating the shared state created by the parent test. They should
probably all be separate toplevel tests instead, with common
setup/teardown logic. But that's a job for another time.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Right now, filtering and packet injection in wgengine depend
on a patch to wireguard-go that probably isn't suitable for upstreaming.
This need not be the case: wireguard-go/tun.Device is an interface.
For example, faketun.go implements it to mock a TUN device for testing.
This patch implements the same interface to provide filtering
and packet injection at the tunnel device level,
at which point the wireguard-go patch should no longer be necessary.
This patch has the following performance impact on i7-7500U @ 2.70GHz,
tested in the following namespace configuration:
┌────────────────┐ ┌─────────────────────────────────┐ ┌────────────────┐
│ $ns1 │ │ $ns0 │ │ $ns2 │
│ client0 │ │ tailcontrol, logcatcher │ │ client1 │
│ ┌─────┐ │ │ ┌──────┐ ┌──────┐ │ │ ┌─────┐ │
│ │vethc│───────┼────┼──│vethrc│ │vethrs│──────┼─────┼──│veths│ │
│ ├─────┴─────┐ │ │ ├──────┴────┐ ├──────┴────┐ │ │ ├─────┴─────┐ │
│ │10.0.0.2/24│ │ │ │10.0.0.1/24│ │10.0.1.1/24│ │ │ │10.0.1.2/24│ │
│ └───────────┘ │ │ └───────────┘ └───────────┘ │ │ └───────────┘ │
└────────────────┘ └─────────────────────────────────┘ └────────────────┘
Before:
---------------------------------------------------
| TCP send | UDP send |
|------------------------|------------------------|
| 557.0 (±8.5) Mbits/sec | 3.03 (±0.02) Gbits/sec |
---------------------------------------------------
After:
---------------------------------------------------
| TCP send | UDP send |
|------------------------|------------------------|
| 544.8 (±1.6) Mbits/sec | 3.13 (±0.02) Gbits/sec |
---------------------------------------------------
The impact on receive performance is similar.
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
This saves a layer of translation, and saves us having to
pass in extra bits and pieces of the netmap and prefs to
wgengine. Now it gets one Wireguard config, and one OS
network stack config.
Signed-off-by: David Anderson <danderson@tailscale.com>
For "tailscale status" on macOS (from separately downloaded
cmd/tailscale binary against App Store IPNExtension).
(This isn't all of it, but I've had this sitting around uncommitted.)
Implement rate limiting on log messages
Addresses issue #317, where logs can get spammed with the same message
nonstop. Created a rate limiting closure on logging functions, which
limits the number of messages being logged per second based on format
string. To keep memory usage as constant as possible, the previous cache
purging at periodic time intervals has been replaced by an LRU that
discards the oldest string when the capacity of the cache is reached.
Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>
These will be used for dynamically changing the identity of a node, so
its ACL rights can be different from your own.
Note: Not all implemented yet on the server side, but we need this so
we can request the tagged rights in the first place.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
We were printing "Shields Up" when the netmap wasn't initialized yet,
which while technically effectively true, turned out to be confusing
when trying to debug things.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
When shields are up, no services are available to connect to, so hide
them all. This will also help them disappear from the UI menu on
other nodes.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
This sets a default packet filter that blocks all incoming requests,
giving end users more control over who can get into their machine, even
if the admin hasn't set any central ACLs.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
- Reset() was not including a Version field, so was getting rejected;
the Logout operation no longer happened when the client got disconnected.
- Don't crash if we can't decode 0-byte messages, which I suspect might
sometimes come through on EOF.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
The tests cheat at filling out web forms by directly POSTing to
the target. The target for authURLs has changed slightly, the base
authURL now redirects the user to the login page.
Additionally, the authURL cycle now checks the cookie is set
correctly, so we add cookie jars where necessary to pass the
cookie through.
Use this when making the ipn state transition from Starting to
Running. This way a network of quiet nodes with no active
handshaking will still transition to Active.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
I noticed portlist when looking at some profiles and hadn't looked at
the code much before. This is a first pass over it. It allocates a
fair bit. More love remains, but this does a bit:
name old time/op new time/op delta
GetList-8 9.92ms ± 8% 9.64ms ±12% ~ (p=0.247 n=10+10)
name old alloc/op new alloc/op delta
GetList-8 931kB ± 0% 869kB ± 0% -6.70% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
GetList-8 4.59k ± 0% 3.69k ± 1% -19.71% (p=0.000 n=10+10)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This removes the need for go-cmp, which is extremely bloaty so we had
to leave it out of iOS. As a result, we had also left it out of macOS,
and so we didn't print netmap diffs at all on darwin-based platforms.
Oops.
As a bonus, the output format of the new function is way better.
Minor oddity: because I used the dumbest possible diff algorithm, the
sort order is a bit dumb. We print all "removed" lines and then print
all "added" lines, rather than doing the usual diff-like thing of
interspersing them. This probably doesn't matter (maybe it's an
improvement).
Brad Fitzpatrick