1807 Commits (d636407f14c97169bde96ac2cb9ac3b0f817975c)

Author	SHA1	Message	Date
Brad Fitzpatrick	45d96788b5	net/netns: remove use of unsafe on Windows ... Found while auditing unsafe for #921 via the list at: https://github.com/tailscale/tailscale/issues/921#issuecomment-727365383 No need for unsafe here, so remove it.	4 years ago
Brad Fitzpatrick	a2d78b4d3e	net/dnscache, control/controlclient: use DNS cache when dialing control ... Cache DNS results of earlier login.tailscale.com control dials, and use them for future dials if DNS is slow or broken. Fixes various issues with trickier setups with the domain's DNS server behind a subnet router. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	97e82c6cc0	net/netcheck: remove unused DNSCache from netcheck ... It's easy to add back later if/when the TODO is implemented.	4 years ago
Avery Pennarun	f99f6608ff	Reverse earlier "allow tag without 'tag:' prefix" changes. ... These accidentally make the tag syntax more flexible than was intended, which will create forward compatibility problems later. Let's go back to the old stricter parser. Revert "cmd/tailscale/cli: fix double tag: prefix in tailscale up" Revert "cmd/tailscale/cli, tailcfg: allow tag without "tag:" prefix in 'tailscale up'" This reverts commit a702921620. This reverts commit cd07437ade. Affects #861. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
David Anderson	7988f75b87	tailscaled.service: also cleanup prior to starting. ... Fixes #813. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	427bf2134f	net/packet: rename from wgengine/packet. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	ebd96bf4a9	wgengine/router/dns: use OpenKeyWait to set DNS configuration. ... Fixes tailscale/corp#839. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	696e160cfc	cmd/tailscale/cli: fix double tag: prefix in tailscale up ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	01ee638cca	Change some os.IsNotExist to errors.Is(err, os.ErrNotExist) for non-os errors. ... os.IsNotExist doesn't unwrap errors. errors.Is does. The ioutil.ReadFile ones happened to be fine but I changed them so we're consistent with the rule: if the error comes from os, you can use os.IsNotExist, but from any other package, use errors.Is. (errors.Is always would also work, but not worth updating all the code) The motivation here was that we were logging about failure to migrate legacy relay node prefs file on startup, even though the code tried to avoid that. See golang/go#41122	4 years ago
Brad Fitzpatrick	7e1a146e6c	cmd/tailscaled: update depaware.txt	4 years ago
David Anderson	54e6c3a290	version: use OSS repo's version when building. ... When building with redo, also include the git commit hash from the proprietary repo, so that we have a precise commit that identifies all build info (including Go toolchain version). Add a top-level build script demonstrating to downstream distros how to burn the right information into builds. Adjust `tailscale version` to print commit hashes when available. Fixes #841. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	cd07437ade	cmd/tailscale/cli, tailcfg: allow tag without "tag:" prefix in 'tailscale up' ... Fixes #861	4 years ago
Brad Fitzpatrick	7c8ca28c74	ipn: use cmd/cloner for Prefs.Clone ... Also, make cmd/cloner's top-level "func Clone" generation opt-in. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	86c271caba	types/logger: move RusagePrefixLog to logger package, disable by default ... The RusagePrefixLog is rarely useful, hasn't been useful in a long time, is rarely the measurement we need, and is pretty spammy (and syscall-heavy). Disable it by default. We can enable it when we're debugging memory.	4 years ago
Alex Brainman	f2ce64f0c6	wgengine/router: unfork winipcfg-go package, use upstream ... Use golang.zx2c4.com/wireguard/windows/tunnel/winipcfg instead of github.com/tailscale/winipcfg-go package. Updates #760 Signed-off-by: Alex Brainman <alex.brainman@gmail.com>	4 years ago
Brad Fitzpatrick	515866d7c6	ipn, ipnserver, cmd/tailscale: add "server mode" support on Windows ... This partially (but not yet fully) migrates Windows to tailscaled's StateStore storage system. This adds a new bool Pref, ForceDaemon, defined as: // ForceDaemon specifies whether a platform that normally // operates in "client mode" (that is, requires an active user // logged in with the GUI app running) should keep running after the // GUI ends and/or the user logs out. // // The only current applicable platform is Windows. This // forced Windows to go into "server mode" where Tailscale is // running even with no users logged in. This might also be // used for macOS in the future. This setting has no effect // for Linux/etc, which always operate in daemon mode. Then, when ForceDaemon becomes true, we now write use the StateStore to track which user started it in server mode, and store their prefs under that key. The ipnserver validates the connections/identities and informs that LocalBackend which userid is currently in charge. The GUI can then enable/disable server mode at runtime, without using the CLI. But the "tailscale up" CLI was also fixed, so Windows users can use authkeys or ACL tags, etc. Updates #275	4 years ago
Josh Bleecher Snyder	a5103a4cae	all: upgrade to latest version of depaware	4 years ago
Josh Bleecher Snyder	38dda1ea9e	all: update depaware.txt ... Broken by 8051ecff55. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	90b7293b3b	ipn: add/move some constants, update a comment ... And make the StateStore implementations be Stringers, for error messages.	4 years ago
Brad Fitzpatrick	8b94a769be	cmd/tailscaled: use the standard flag page instead of getopt ... Per discussion with @crawshaw. The CLI tool already used std flag anyway. If either of them, it would've made more sense for the CLI to use getopt.	4 years ago
Josh Bleecher Snyder	6e8328cba5	wgengine/tsdns: replace connections when net link changes (macOS) ... When the network link changes, existing UDP sockets fail immediately and permanently on macOS. The forwarder set up a single UDP conn and never changed it. As a result, any time there was a network link change, all forwarded DNS queries failed. To fix this, create a new connection when send requests fail because of network unreachability. This change is darwin-only, although extended it to other platforms should be straightforward. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	3528d28ed1	wgengine/router: move Tailscale's winipcfg additions into wgengine/router ... Part of unforking our winipcfg-go and using upstream (#760), move our additions into our repo. (We might upstream them later if upstream has interest) Originally these were: @apenwarr: "Add ifc.SyncAddresses() and SyncRoutes()." 609dcf2df5 @bradfitz: "winipcfg: make Interface.AddRoutes do as much as possible, return combined error" e9f93d53f3 @bradfitz: "prevent unnecessary Interface.SyncAddresses work; normalize IPNets in deltaNets" decb9ee8e1	4 years ago
Brad Fitzpatrick	3bdcfa7193	ipn: remove DisableDERP pref ... We depend on DERP for NAT traversal now[0] so disabling it entirely can't work. What we'll do instead in the future is let people specify alternate/additional DERP servers. And perhaps in the future we could also add a pref for nodes to say when they expect to never need/want to use DERP for data (but allow it for NAT traversal communication). But this isn't the right pref and it doesn't work, so delete it. Fixes #318 [0] https://tailscale.com/blog/how-nat-traversal-works/	4 years ago
Christina Wen	f0e9dcdc0a	wgengine/router: restore /etc/resolv.conf after tailscale down is called ... This change is to restore /etc/resolv.conf after tailscale down is called. This is done by setting the dns.Manager before errors occur. Error collection is also added. Fixes #723	4 years ago
Josh Bleecher Snyder	7f97cf654d	cmd/microproxy: add -insecure flag ... This makes it easier to run microproxy locally during development. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	3fa863e6d9	cmd/derper: add missing html.EscapeString calls in /debug page ... Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	931bcd44cb	control/controlclient: report Synology "distro" + its version to control	4 years ago
David Anderson	8f5b52e571	net/netns: add windows support. ... Also remove rebinding logic from the windows router. Magicsock will instead rebind based on link change signals. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	4f7751e025	Update depaware for previous ipnserver change.	4 years ago
Brad Fitzpatrick	a084c44afc	wgengine, wgengine/router, cmd/tailscale: force netfilter mode off on Synology ... For now. Get it working again so it's not stuck on 0.98. Subnet relay can come later. Updates #451 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	8b60936913	depaware: update deps	4 years ago
Brad Fitzpatrick	22ed3c503e	Add depaware.txt files and GitHub checks. (#745) ... See https://github.com/tailscale/depaware Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	7bd89359c9	cmd/cloner: generate a package-level Clone function ... This Clone function knows how to clone any types for which it has generated Clone methods. This allows callers to efficiently clone an inbound interface{} that might contain one of these types. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	99d223130c	cmd/cloner: fix found type detection ... This was causing any type to be reported as found, as long as there were any type decls at all. Oops. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	2352690bde	cmd/cloner: ensure cloner gets re-run when structs change ... If you change a struct and don't re-run cloner, your Cloner method might be inaccurate, leading to bad things. To prevent this, write out the struct as it is at the moment that cloner is caller, and attempt a conversion from that type. If the struct gets changed in any way, this conversion will fail. This will yield false positives: If you change a non-pointer field, you will be forced to re-run cloner, even though the actual generated code won't change. I think this is an acceptable cost: It is a minor annoyance, which will prevent real bugs. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	468bb3afce	cmd/tailscale/cli: add debug -derp mode	4 years ago
Brad Fitzpatrick	1e0be5a458	tshttp, derphttp: send Proxy-Authorization, not Authorization, to proxies ... Whoops. But weirdly, sending Authorization sometimes worked?	4 years ago
halulu	3af2d671e6	cmd/tailscale/cli: add new flag --force-reauth to up subcommand (#717) ... Signed-off-by: Halulu <lzjluzijie@gmail.com>	4 years ago
halulu	bd37e40d2b	cmd/tailscale/cli: status exit when disconnected (#720) ... cmd/tailscale/cli: make status report stopped status, exit non-zero Fixes #714	4 years ago
Brad Fitzpatrick	483141094c	cmd/tailscale/cli: add basic 'down' subcommand ... RELNOTE=yes	4 years ago
halulu	f27a57911b	cmd/tailscale: add derp and endpoints status (#703) ... cmd/tailscale: add local node's information to status output (by default) RELNOTE=yes Updates #477 Signed-off-by: Halulu <lzjluzijie@gmail.com>	4 years ago
Brad Fitzpatrick	f915ab6552	net/tshttpproxy: add start of Kerberos Negotiate auth to proxies on Windows ... For now only used by a new cmd/tailscale debug --get-url subcommand. Not yet wired up to the places making HTTP requests. Updates tailscale/corp#583	4 years ago
Brad Fitzpatrick	5e0375808b	cmd/tailscale/cli: fix vet warning ... And add vet to the "make check" target, like the CI has.	4 years ago
Brad Fitzpatrick	1be6c6dd70	cmd/tailscale/cli: add hidden debug subcommand	4 years ago
Brad Fitzpatrick	e415991256	derp, derp/derphttp: remove one RTT from DERP setup ... * advertise server's DERP public key following its ServerHello * have client look for that DEPR public key in the response PeerCertificates * let client advertise it's going into a "fast start" mode if it finds it * modify server to support that fast start mode, just not sending the HTTP response header Cuts down another round trip, bringing the latency of being able to write our first DERP frame from SF to Bangalore from ~725ms (3 RTT) to ~481ms (2 RTT: TCP and TLS). Fixes #693 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	771e9541c7	cmd/tailscale/cli: appease staticcheck	4 years ago
Brad Fitzpatrick	adf4f3cce0	cmd/tailscale/cli: make netcheck sort regions, show full region names	4 years ago
David Anderson	c2b63ba363	cmd/microproxy: add a quick hack for some malformed variables. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	4e63a4fda3	cmd/tailscale/cli: remove already done TODO	4 years ago
Brad Fitzpatrick	84dc891843	cmd/tailscale/cli: add ping subcommand ... For example: $ tailscale ping -h USAGE ping <hostname-or-IP> FLAGS -c 10 max number of pings to send -stop-once-direct true stop once a direct path is established -verbose false verbose output $ tailscale ping mon.ts.tailscale.com pong from monitoring (100.88.178.64) via DERP(sfo) in 65ms pong from monitoring (100.88.178.64) via DERP(sfo) in 252ms pong from monitoring (100.88.178.64) via [2604:a880:2:d1::36:d001]:41641 in 33ms Fixes #661 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	87cbc067c2	cmd/tailscale/cli: validate advertised routes' IP address-vs-network bits ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	b23f2263c1	derp: add server version to /debug, expvars ... This will make it easier for a human to tell what version is deployed, for (say) correlating line numbers in profiles or panics to corresponding source code. It'll also let us observe version changes in prometheus. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	6818bb843d	Update README, remove old relaynode dredge	4 years ago
Mike Kramlich	08949d4ef1	--advertise-routes option enabled in Mac tailscale CLI; it checks for IP forwarding enabled ... Signed-off-by: Mike Kramlich <groglogic@gmail.com>	4 years ago
David Anderson	9e26ffecf8	cmd/tailscaled: ignore SIGPIPE. ... SIGPIPE can be generated when CLIs disconnect from tailscaled. This should not terminate the process. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	d64de1ddf7	Revert "cmd/tailscaled: exit gracefully on SIGPIPE" ... tailscaled receives a SIGPIPE when CLIs disconnect from it. We shouldn't shut down in that case. This reverts commit 43b271cb26. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Dmytro Shynkevych	43b271cb26	cmd/tailscaled: exit gracefully on SIGPIPE ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
David Crawshaw	92e9a5ac15	tailscaled.service: use default restart limiting ... It appears that systemd has sensible defaults for limiting crash loops: DefaultStartLimitIntervalSec=10s DefaultStartLimitBurst=5 Remove our insta-restart configuration so that it works. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Brad Fitzpatrick	ff8c8db9d3	cmd/tailscaled: log on shutdown signal	4 years ago
Brad Fitzpatrick	4aba86cc03	ipn/ipnserver: make Engine argument a func that tries again for each connection ... So a backend in server-an-error state (as used by Windows) can try to create a new Engine again each time somebody re-connects, relaunching the GUI app. (The proper fix is actually fixing Windows issues, but this makes things better in the short term) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ec4feaf31c	cmd/cloner, tailcfg: fix nil vs len 0 issues, add tests, use for Hostinfo ... Also use go:generate and https://golang.org/s/generatedcode header style. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Crawshaw	961b9c8abf	cmd/cloner: tool to generate Clone methods ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Dmytro Shynkevych	318751c486	cmd/tailscaled: always flush logs properly ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Dmytro Shynkevych	4957360ecd	cmd/tailscale: rename use-dns to accept-dns ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Dmytro Shynkevych	dd4e06f383	cmd/tailscale: add corpDNS flag ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	2545575dd5	cmd/tailscale: default to not reporting daemon version ... That's what I meant to do when I added "tailscale version" but apparently I didn't.	4 years ago
Brad Fitzpatrick	6095a9b423	cmd/tailscale: add "version" subcommand ... Fixes #448 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	f562c35c0d	safesocket: support connecting to Mac TCP server from within App Sandbox	4 years ago
Brad Fitzpatrick	10ac066013	all: fix vet warnings	4 years ago
Dmytro Shynkevych	852136a03c	cmd/tailscale: simplify hostname validation ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Dmytro Shynkevych	65d2537c05	cmd/tailscale: modify empty hostname case ... Signed-Off-By: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Dmytro Shynkevych	8163521c33	cmd/tailscale: allow overriding hostname in tailscale up ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	44baa3463f	cmd/tailscale/cli: add initial predicate func ActLikeCLI	4 years ago
Dmytro Shynkevych	19d77ce6a3	cmd/tailscale: fix typo in license headers ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	7ba148e54e	cmd/tailscale: make tailscale status -active also filter in -json mode	4 years ago
Brad Fitzpatrick	60f4982f9b	cmd/tailscale: move code into new reusable cmd/tailscale/cli package ... cmd/tailscale's package main is now just a few lines. This'll let us embed the CLI in the Mac and Windows clients. Updates #541	4 years ago
Brad Fitzpatrick	e589c76e98	cmd/tailscaled: don't require --socket path on windows	4 years ago
Brad Fitzpatrick	c1d9e41bef	cmd/tailscaled: use "Tailscale" as default TUN device name on Windows ... That's what's used in the Windows GUI version and seems special. If we don't use that, Windows tries to rename it and fails.	4 years ago
Brad Fitzpatrick	f98706bdb3	paths, cmd/tailscaled: on Windows, don't try to migrate from legacy relay.conf ... Avoids confusing logspam on Windows.	4 years ago
Dmytro Shynkevych	61abab999e	cmd/tailscaled: graceful shutdown (#534) ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	0551bec95b	cmd/tailscale: add -active flag to 'tailscale status' to filter out inactive peers	4 years ago
Brad Fitzpatrick	5c6d8e3053	netcheck, tailcfg, interfaces, magicsock: survey UPnP, NAT-PMP, PCP ... Don't do anything with UPnP, NAT-PMP, PCP yet, but see how common they are in the wild. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	32156330a8	net/interfaces: add func LikelyHomeRouterIP ... For discovering where we might direct NAT-PMP/PCP/UPnP queries at in the future.	4 years ago
Brad Fitzpatrick	630379a1d0	cmd/tailscale: add tailscale status region name, last write, consistently star ... There's a lot of confusion around what tailscale status shows, so make it better: show region names, last write time, and put stars around DERP too if active. Now stars are always present if activity, and always somewhere.	4 years ago
Brad Fitzpatrick	3553512a71	cmd/derper: fix embarassing bug introduced in earlier refactor ... The remove hook implementation was copy/pasted from the line above and I didn't change the body, resulting in packet forwarding routes never being removed. Fortunately we weren't using this path yet, but it led to stats being off, and (very) slow memory growth.	4 years ago
Brian Chu	2a8e064705	cmd/tailscale: Allow advertising subnet routes on *BSD. ... Use sysctl to check IP forwarding state for better OS compatiblity. Signed-off-by: Brian Chu <cynix@cynix.org>	4 years ago
Brad Fitzpatrick	b87396b5d9	cmd/derper, derp: add some more varz and consistency check handler ... I'm trying to hunt down a slow drift in numbers not agreeing.	4 years ago
Brad Fitzpatrick	c8cf3169ba	cmd/derper, derp/derphttp: move bulk of derp mesh code into derphttp ... To be reused in various other tools.	4 years ago
Brad Fitzpatrick	7cbf6ab771	cmd/derper: remove unused parameter in runMeshClient	4 years ago
Brad Fitzpatrick	abd79ea368	derp: reduce DERP memory use; don't require callers to pass in memory to use ... The magicsock derpReader was holding onto 65KB for each DERP connection forever, just in case. Make the derp{,http}.Client be in charge of memory instead. It can reuse its bufio.Reader buffer space.	4 years ago
Brad Fitzpatrick	1cb7dab881	cmd/derper: support forwarding packets amongst set of peer DERP servers ... Updates #388 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	b663ab4685	cmd/derper: treat self-connection connection watch as no-op ... Updates #388	5 years ago
Brad Fitzpatrick	5798826990	cmd/derper: add /home/bradfitz/keys to default mesh key search list	5 years ago
Brad Fitzpatrick	484b7fc9a3	derp, cmd/derper: add frameWatchConns, framePeerPresent for inter-DERP routing ... This lets a trusted DERP client that knows a pre-shared key subscribe to the connection list. Upon subscribing, they get the current set of connected public keys, and then all changes over time. This lets a set of DERP server peers within a region all stay connected to each other and know which clients are connected to which nodes. Updates #388 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	c62b80e00b	cmd/tailscale: fix inverted flag meanings. ... The flags were --no-blah for a brief time, then we switched them to --blah=true/false with a default of true, but didn't fix the boolean inversions in the code. So up was down, true was false, etc. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	83b6b06cc4	cmd/tailscale: fix broken build, result of borked stash pop.	5 years ago
David Anderson	3c7791f6bf	cmd/tailscale: remove double negation arguments. ... --no-snat becomes --snat-subnet-routes --no-single-routes becomes --host-routes Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	984a699219	cmd/tailscale: warn to stderr that netcheck -format=json isn't stable	5 years ago
Brad Fitzpatrick	0245bbe97b	Make netcheck handle v6-only interfaces better, faster. ... Also: * add -verbose flag to cmd/tailscale netcheck * remove some API from the interfaces package * convert some of the interfaces package to netaddr.IP * don't even send IPv4 probes on machines with no IPv4 (or only v4 loopback) * and once three regions have replied, stop waiting for other probes at 2x the slowest duration. Updates #376	5 years ago
Brad Fitzpatrick	a96165679c	cmd/tailscale: add netcheck flags for incremental reports, JSON output	5 years ago
Avery Pennarun	9ff51909a3	router_linux: fix behaviour when switching --netfilter-mode. ... On startup, and when switching into =off and =nodivert, we were deleting netfilter rules even if we weren't the ones that added them. In order to avoid interfering with rules added by the sysadmin, we have to be sure to delete rules only in the case that we added them in the first place. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	85d93fc4e3	cmd/tailscale: make ip_forward warnings more actionable. ... Let's actually list the file we checked (/proc/sys/net/ipv4/ip_forward). That gives the admin something specific to look for when they get this message. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	99aa33469e	cmd/tailscale: be quiet when no interaction or errors are needed. ... We would print a message about "nothing more to do", which some people thought was an error or warning. Let's only print a message after authenticating if we previously asked for interaction, and let's shorten that message to just "Success," which is what it means. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Dmytro Shynkevych	7508b67c54	cmd/tailscale: expose --enable-derp ... Signed-off-by: Dmytro Shynkevych <dm.shynk@gmail.com>	5 years ago
Brad Fitzpatrick	b0c10fa610	stun, netcheck: move under net	5 years ago
Brad Fitzpatrick	e6b84f2159	all: make client use server-provided DERP map, add DERP region support ... Instead of hard-coding the DERP map (except for cmd/tailscale netcheck for now), get it from the control server at runtime. And make the DERP map support multiple nodes per region with clients picking the first one that's available. (The server will balance the order presented to clients for load balancing) This deletes the stunner package, merging it into the netcheck package instead, to minimize all the config hooks that would've been required. Also fix some test flakes & races. Fixes #387 (Don't hard-code the DERP map) Updates #388 (Add DERP region support) Fixes #399 (wgengine: flaky tests) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Avery Pennarun	af9328c1b7	log rate limiting: reformat limiter messages, and use nonempty burst size. ... - Reformat the warning about a message being rate limited to print the format string, rather than the formatted message. This helps give a clue what "type" of message is being limited. - Change the rate limit warning to be [RATE LIMITED] in all caps. This uses less space on each line, plus is more noticeable. - In tailscaled, change the frequency to be less often (once every 5 seconds per format string) but to allow bursts of up to 5 messages. This greatly reduces the number of messages that are rate limited during startup, but allows us to tighten the limit even further during normal runtime. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	f2db4ac277	cmd/tailscaled: SetGCPercent() if GOGC is not set. ... This cuts RSS from ~30MB to ~20MB on my machine, after the previous fix to get rid of unnecessary zstd buffers. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	d074ec6571	cmd/tailscaled: eliminate unnecessary use of an init() function. ... Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Wendi Yu	bb55694c95	wgengine: log node IDs when peers are added/removed (#381) ... Also stop logging data sent/received from nodes we're not connected to (ie all those `x`s being logged in the `peers: ` line) Signed-off-by: Wendi <wendi.yu@yahoo.ca>	5 years ago
David Anderson	0fe262f093	ipn: plumb NetfilterMode all the way out to the CLI. ... Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	292606a975	wgengine/router: support multiple levels of netfilter involvement. ... Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	bfdc8175b1	wgengine/router: add a setting to disable SNAT for subnet routes. ... Part of #320. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	8b0be7475b	cmd/tailscale: warn subnet route users if IP forwarding is off. #320 ... Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	ad1cfe8bbe	cmd/tailscale: support IPs or CIDRs in -advertise-routes. ... Fixes #370. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	529e2cb31a	ipn: add AllowVersionSkew bool to Notify & Message ... For "tailscale status" on macOS (from separately downloaded cmd/tailscale binary against App Store IPNExtension). (This isn't all of it, but I've had this sitting around uncommitted.)	5 years ago
Wendi Yu	0c69b4e00d	Implement rate limiting on log messages (#356) ... Implement rate limiting on log messages Addresses issue #317, where logs can get spammed with the same message nonstop. Created a rate limiting closure on logging functions, which limits the number of messages being logged per second based on format string. To keep memory usage as constant as possible, the previous cache purging at periodic time intervals has been replaced by an LRU that discards the oldest string when the capacity of the cache is reached. Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>	5 years ago
Zijie Lu	e3559d1c45	cmd/netcheck: better DERP latency checking output ... Fixes #206 Signed-off-by: Zijie Lu <zijie@tailscale.com>	5 years ago
Dmytro Shynkevych	68a173bc24	cmd/mkpkg: support adding empty directories. ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
Avery Pennarun	9d1f48032a	cmd/tailscale: add --advertise-tags option. ... These will be used for dynamically changing the identity of a node, so its ACL rights can be different from your own. Note: Not all implemented yet on the server side, but we need this so we can request the tagged rights in the first place. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
David Anderson	1ac570def7	wgengine/router: split out from wgengine. ... The router implementations are logically separate, with their own API. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Avery Pennarun	d7429b9a8d	Add prefs.ShieldsUp and --shields-up option. ... This sets a default packet filter that blocks all incoming requests, giving end users more control over who can get into their machine, even if the admin hasn't set any central ACLs. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
wardn	d052586da7	cmd/taillogin: delete it ... Signed-off-by: wardn <wardn@users.noreply.github.com>	5 years ago
Brad Fitzpatrick	45f2b53aca	all: remove unnecessary trailing newlines in format patterns for consistency ... And document on logger.Logf that it's unnecessary.	5 years ago
Brad Fitzpatrick	73249f8032	netcheck: aggregate spammy logging onto one concise line	5 years ago
David Crawshaw	f8b72d2b5b	cmd/tailscale: add up --authkey flag ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Sylvain Rabot	a279032998	cmd/mkpkg: fix missing default value for --depends ... Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>	5 years ago
Brad Fitzpatrick	64334143a1	tsweb: rename Handler to ReturnHandler ... The name's been bugging me for a long time. I liked neither the overlap between tsweb.Handler and http.Handler, nor the name "ServeHTTPErr" which sounds like it's an error being returned, like it's an error handler and not sometimes a happy path. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	ba2774ea27	cmd/mkpkg: support depending on stuff. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	362d6af4e2	cmd/tailscaled: set CacheDirectory in service. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	48d7ee1c6a	cmd/microproxy: adjust to export node stats and a Go expvar server's stats. ... This is a temporary specialization to what tailscale prod needs right now, it'll go back to something more generic later.	5 years ago
David Anderson	c14bc028ac	cmd/microproxy: tiny TLS proxy that borrows autocert x509 certs.	5 years ago
Brad Fitzpatrick	a4ef345737	cmd/tailscale: add status subcommand ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	8ebee05fbd	cmd/tailscale: remove unnecessary logpolicy/logtail logging	5 years ago
Brad Fitzpatrick	322499473e	cmd/tailscaled, wgengine, ipn: add /debug/ipn handler with world state ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Avery Pennarun	a56e853b72	cmd/relaynode: delete it! ... tailscale+tailscaled now completely obsoletes relaynode, so let's let it finally go away.	5 years ago
David Anderson	1e031001db	derp: move write timeout to package constant. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	dbfc916273	derp: add short queues between reader and writer, drop on overload. ... This avoids the server blocking on misbehaving or heavily contended clients. We attempt to drop from the head of the queue to keep overall queueing time lower. Also: - fixes server->client keepalives, which weren't happening. - removes read rate-limiter, deferring instead to kernel-level global limiter/fair queuer. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	e085aec8ef	all: update to wireguard-go API changes ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	8de67844bd	cmd/tailscale: make failure message when tailscaled down less technical	5 years ago
Brad Fitzpatrick	5aafe0ee96	cmd/tailscale: don't crash on too many non-flag args	5 years ago
David Anderson	ea0836dce9	cmd/tailscaled: remove default user/group from systemd.	5 years ago
Brad Fitzpatrick	6c3820e8c4	cmd/tailscaled: rename relaynode reference in defaults file comment	5 years ago
Avery Pennarun	b4897e7de8	controlclient/netmap: write our own b.ConciseDiffFrom(a) function. ... This removes the need for go-cmp, which is extremely bloaty so we had to leave it out of iOS. As a result, we had also left it out of macOS, and so we didn't print netmap diffs at all on darwin-based platforms. Oops. As a bonus, the output format of the new function is way better. Minor oddity: because I used the dumbest possible diff algorithm, the sort order is a bit dumb. We print all "removed" lines and then print all "added" lines, rather than doing the usual diff-like thing of interspersing them. This probably doesn't matter (maybe it's an improvement).	5 years ago
Brad Fitzpatrick	b9c6d3ceb8	netcheck: work behind UDP-blocked networks again, add tests ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Crawshaw	5ad947c761	cmd/derper: set a write timeout ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Avery Pennarun	509247bf42	tailscale, tailscaled: update safesocket port number. ... This makes them able to connect to each other on Windows.	5 years ago
Brad Fitzpatrick	5c1e443d34	wgengine/monitor: don't call LinkChange when interfaces look unchanged ... Basically, don't trust the OS-level link monitor to only tell you interesting things. Sanity check it. Also, move the interfaces package into the net directory now that we have it.	5 years ago
Brad Fitzpatrick	39c0ae1dba	derp/derpmap: new DERP config package, merge netcheck into magicsock more ... Fixes #153 Updates #162 Updates #163 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Martin Baillie	8ae3ba0cf5	wgengine: define default tunname for each platform ... The device name "tailscale0" will be used for all platforms except for OpenBSD where "tun" is enforced by the kernel. `CreateTUN()` in `wireguard-go` will select the next available "tunX" device name on the OpenBSD system. Signed-off-by: Martin Baillie <martin@baillie.email>	5 years ago
Brad Fitzpatrick	8abdbbdd1f	cmd/derper: also link to /debug/varz	5 years ago
Brad Fitzpatrick	ff6b3c2c38	netcheck: include two more DERP nodes, show more in CLI report	5 years ago
David Anderson	f192c05413	metrics: add a LabelMap type for variables with 1 label dimension. ... This lets us publish sets of vars that are breakdowns along one dimension in a format that Prometheus and Grafana natively know how to do useful things with. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	20da44eae3	cmd/mkpkg: support scripts for rpm as well.	5 years ago
Brad Fitzpatrick	e371520cc5	tsweb, derp: add expvar http.Handler for Prometheus's format ... And add some opinions. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	21fc5ec371	cmd/mkpkg: support specifying that a package replaces another. ... Both RPM and Deb require us to specify both Replaces and Conflicts: Conflicts tells them that the packages cannot coexist on the system, Replaces tells them which one to keep.	5 years ago
Brad Fitzpatrick	dd68debd64	cmd/derper: set autocert Email ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	65e7c58aa4	cmd/tailscale, cmd/tailscaled, paths: add paths package for default paths ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	a399ef3dc7	cmd/derper: appease staticcheck	5 years ago
Brad Fitzpatrick	051b6ef141	cmd/derper: accept more LetsEncrypt hostnames without explicit config	5 years ago
Brad Fitzpatrick	bcf3719b9e	netcheck: add hairpinning detection ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	f3c0ea23d9	netcheck, stunner: reduce log spam ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	78654ee1bd	cmd/tailscale: switch to an ffcli based CLI. ... Two commands for now, `up` and `netcheck`. The commands and the flags they take will change a bunch in the future, but this is good enough to launch on parity with relaynode. Signed-Off-By: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	14559340ee	Start of netcheck package & including network state in Hostinfo. ... * adds new packet "netcheck" to do the checking of UDP, IPv6, and nearest DERP server, and the Report type for all that (and more in the future, probably pulling in danderson's natprobe) * new tailcfg.NetInfo type * cmd/tailscale netcheck subcommand (tentative name, likely to change/move) to print out the netcheck.Report. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	00ad93ec25	cmd/derper: add a STUN server ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	d8de11a01b	control: make Hostinfo accessed by pointer ... Fix potential races in copying aliased slices by value. Also few little doc updates. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	824f825552	tsweb, cmd/derper: move common web/debug stuff from derper to new tsweb ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	accf868130	cmd/mkpkg: add flags for debian scripts.	5 years ago
Brad Fitzpatrick	c763901b1a	cmd/derper: provide debug access over port 80 to trusted (tailscale) IPs ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	cc44e8a443	cmd/mkpkg: add small wrapper around nfpm to build deb/rpm packages. ... Signed-Off-By: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	2612e54ad1	derp, cmd/derper: add debug handlers, stats ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	433b917977	interfaces, cmd/tsshd: move interface lookup from tsshd to its own package ... For reuse by derper, etc. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	37e115834e	cmd/derper: support logging to logtail ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	88f1cc0c98	derp, cmd/derper: add rate limiting support, add default 5Mbps limit ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	c47f907a27	ipn: use *Prefs rather than Prefs throughout. ... Prefs has become a heavy object with non-memcpy copy semantics. We should not pass such a thing by value. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	0c55777fed	ipn: temporary support for loading legacy relaynode configs. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	5868dd1a77	Lint: remove unused function. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Avery Pennarun	57bbafde84	cmd/relaynode: drop local --acl-file in favour of central packet filter. ... relaynode itself is not long for this world, deprecated in favour of tailscale/tailscaled. But now that the control server supports central distribution of packet filters, let's actually take advantage of it in a final, backward compatible release of relaynode.	5 years ago
David Anderson	15b4d26d92	logpolicy: automatically figure out paths and filenames. ... The autoselection should pick sensible paths for all of: - Windows (LocalAppData) - Mac (Library/Caches) - Unix user (XDG_CACHE_DIR) - Linux systemd service (CACHE_DIRECTORY) As a last resort, if cache dir lookup fails, plops sufficiently uniquely named files into the current working directory. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	cf1e386cbd	ipn: move Options.ServerURL into Prefs. ... We can't rely on a frontend to provide a control server URL, so this naturally belongs in server-persisted state. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	c4f6f622f0	tailscaled: remove comment from systemd unit. ... No need to ship TODOs to end user systems. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	20e6fc1d78	tailscaled: fix systemd unit definition. ... Port number has to be by itself for substitution to work. Disabling the restart rate-limiting has to be in [Unit] not [Service]. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	5d4b96b8f2	tailscaled: add a systemd unit. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	85ac82c386	tailscaled: default to a sock in current dir, for development. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	76819e7432	tailscaled: call the network interface tailscale0, not ts0. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	4460bd638b	safesocket: simplify API. ... On unix, we want to provide a full path to the desired unix socket. On windows, currently we want to provide a TCP port, but someday we'll also provide a "path-ish" object for a named pipe. For now, simplify the API down to exactly a path and a TCP port. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	b72e6446e2	cmd/derper: add a basic DERP server ... Mostly Crawshaw's earlier code, refactored a bit. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	47da432991	ipn: handle advertised routes provided by frontend. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	62fb652eef	cmd/tailscaled: run off internal state autonomously. ... With this change, tailscaled can be restarted and reconnect without interaction from `tailscale`, and `tailscale` is merely there to provide login assistance and adjust preferences. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	79295b1138	wgengine: simplify, change some signatures ... * make RouterGen return an error, not take both tunname and tundev * also remove RouteGen taking a wireguard/device.Device; currently unused * remove derp parameter (it'll work differently) * unexport NewUserspaceRouter in per-OS impls, add documented wrapper Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	dec5d64593	ipn/ipnserver: remove Options.AllowQuit. ... It was previously used by the MacOS client, but it now does something different. ipnserver should never obey a client's request to exit. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	4796f6fd67	cmd/tailscale: document pump(). ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	47820db381	cmd/tailscale{,d}: rename main file. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	b0f5751a76	cmd/tailscale: remove statekey for now. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
David Anderson	5bc632271b	Introduce a state store to LocalBackend. ... The store is passed-in by callers of NewLocalBackend and ipnserver.Run, but currently all callers are hardcoded to an in-memory store. The store is unused. Signed-Off-By: David Anderson <dave@natulte.net>	5 years ago
David Anderson	21280ca2d1	Make ipn.Options.Prefs a pointer. ... This is a prelude to making it truly optional, once state management has moved into the backend. For now though, it's still required. This change is just isolating the bubbling-up of the pointerification into other layers. Signed-Off-By: David Anderson <dave@natulte.net>	5 years ago
David Anderson	f6f154193f	Remove LoginFlags from Backend options. ... - It was only used in one currently-unused client. - It's an imperative command, not a configuration setting. - The LoginFlags stuff in controlclient feels like it needs a refactor anyway. I'll put this logic back once ipnd owns its state and Backend commands reflect that. Signed-Off-By: David Anderson <dave@natulte.net>	5 years ago
David Crawshaw	a631466587	cmd/tsshd: empty file for windows build ... Signed-off-by: David Crawshaw <david@zentus.com>	5 years ago
Brad Fitzpatrick	745c8c92b1	wgengine: fix windows build for winipcfg-go ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	67c1b2c6ef	cmd/tsshd: fix lint. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Martin Baillie	3d5ef74f26	tailscaled: add tunnel name and port flags ... OpenBSD tunnel names are prefixed with `tun`. Controlling the port allows for deterministic configuration of firewall rules (using `pf` in this case). Signed-off-by: Martin Baillie <martin@baillie.email>	5 years ago
Brad Fitzpatrick	13dc12814e	cmd/tsshd: fix log text	5 years ago
Brad Fitzpatrick	d404f1caed	cmd/tsshd: add basic SSH server	5 years ago
David Anderson	ea11d58e96	debian: fix changelog generation. ... It seems changelog generation got broken by moving the code between corp and OSS repos, because one of the commit SHAs doesn't have an associated tag. In the interest of fixing the build, and because we're not yet trying to upstream the debian package, I fixed this by allowing hash-based versions to show up in the changelog. This maybe wrong from a debian standards perspective, but for our current point in life it'll work until we learn to do it better. Signed-Off-By: David Anderson <dave@natulte.net>	5 years ago
David Anderson	14af0c4eb3	taillogin: check err in controlclient.New. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	516a15ee58	cmd: add import comments ... See https://golang.org/cmd/go/#hdr-Import_path_checking	5 years ago
Earl Lee	a8d8b8719a	Move Linux client & common packages into a public repo.	5 years ago