tailscale

Commit Graph

Author	SHA1	Message	Date
Josh Bleecher Snyder	d2529affa2	wgengine/magicsock: quiet wireguard-go logging in tests We already do this in newUserspaceEngineAdvanced. Apply it to newMagicStack as well. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	3ad7c2133a	wgengine/userspace: make wireguard-go log silencing include peer routines Also suppress log lines like: peer(Kksd…ySmc) - Routine: sequential sender - stopped Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	b560386c1a	net/packet, wgengine, tstun: add inter-node TSMP protocol for connect errors This adds a new IP Protocol type, TSMP on protocol number 99 for sending inter-tailscale messages over WireGuard, currently just for why a peer rejects TCP SYNs (ACL rejection, shields up, and in the future: nothing listening, something listening on that port but wrong interface, etc) Updates #1094 Updates tailscale/corp#1185 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	01e8b7fb7e	go.mod: bump wireguard-go version. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	5611f290eb	ipn, ipnserver: only require sudo on Linux for mutable CLI actions This partially reverts `d6e9fb1df0`, which modified the permissions on the tailscaled Unix socket and thus required "sudo tailscale" even for "tailscale status". Instead, open the permissions back up (on Linux only) but have the server look at the peer creds and only permit read-only actions unless you're root. In the future we'll also have a group that can do mutable actions. On OpenBSD and FreeBSD, the permissions on the socket remain locked down to 0600 from `d6e9fb1df0`. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	a45665426b	cmd/tailscale/cli: tweak the status name column a bit * make peers without DNS names show their hostnames as always one column, for cut/etc users * remove trailing dot from shared peers' DNS names	3 years ago
Naman Sood	420c7a35e2	wgengine/netstack: use tailscale IPs instead of a hardcoded one (#1131 ) Signed-off-by: Naman Sood <mail@nsood.in>	3 years ago
Brad Fitzpatrick	3ac952d4e9	go.sum: update	3 years ago
Brad Fitzpatrick	a4b39022e0	wgengine/tsdns: fix MagicDNS lookups of shared nodes Fixes tailscale/corp#1184	3 years ago
Brad Fitzpatrick	b00c0e5f60	go.sum: update	3 years ago
Alex Brainman	6e4231c03c	wgengine/router/dns: remove unused code Commit 68ddf1 removed code that reads `SOFTWARE\Tailscale IPN\SearchList` registry value. But the commit left code that writes that value. So now this package writes and never reads the value. Remove the code to stop pointless work. Updates #853 Signed-off-by: Alex Brainman <alex.brainman@gmail.com>	3 years ago
Josh Bleecher Snyder	654b5f1570	all: convert from []wgcfg.Endpoint to string This eliminates a dependency on wgcfg.Endpoint, as part of the effort to eliminate our wireguard-go fork. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Anderson	9abcb18061	wgengine/magicsock: import more of wireguard-go, update docstrings. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	22507adf54	wgengine/magicsock: stop depending on UpdateDst in legacy codepaths. This makes connectivity between ancient and new tailscale nodes slightly worse in some cases, but only in cases where the ancient version would likely have failed to get connectivity anyway. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	017dcd520f	tsweb: export VarzHandler	3 years ago
Brad Fitzpatrick	c1dabd9436	control/controlclient: let clients opt in to Sharer-vs-User split model Updates tailscale/corp#1183	3 years ago
Josh Bleecher Snyder	b38fa7de29	go.mod: update to latest wireguard-go	3 years ago
Josh Bleecher Snyder	020084e84d	wgengine: adapt to removal of wgcfg.Key in wireguard-go	3 years ago
Smitty	2bf49ddf90	Provide example when format string is rate limited Here's an example log line in the new format: [RATE LIMITED] format string "open-conn-track: timeout opening %v; no associated peer node" (example: "open-conn-track: timeout opening ([ip] => [ip]); no associated peer node") This should make debugging logging issues a bit easier, and give more context as to why something was rate limited. This change was proposed in a comment on #1110. Signed-off-by: Smitty <me@smitop.com>	3 years ago
Denton Gentry	ce058c8280	Revert "Add logtail tests (#1114 )" (#1116 ) This reverts commit `e4f53e9b6f`. At least two of these tests are flakey, reverting until they can be made more robust. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Smitty	b2a08ddacd	wgengine/tsdns: return NOERROR instead of NOTIMP for most records This is what every other DNS resolver I could find does, so tsdns should do it to. This also helps avoid weird error messages about non-existent records being unimplemented, and thus fixes #848. Signed-off-by: Smitty <me@smitop.com>	3 years ago
Denton Gentry	e4f53e9b6f	Add logtail tests (#1114 ) * logtail: test parseAndRemoveLogLevel() Signed-off-by: Denton Gentry <dgentry@tailscale.com> * logtail: test JSON log encoding. Expand TestUploadMessages to also exercise the encoding functions in logtail, like JSON logging and timestamps. Other tests frequently send logs but a) don't check the result and b) do so by happenstance, such that the lines in encode() were not consistently being exercised and leading to spurious changes in code coverage. Signed-off-by: Denton Gentry <dgentry@tailscale.com> * logtail: add a test for drainPendingMessages Make the client buffer some messages before the upload server becomes available. Signed-off-by: Denton Gentry <dgentry@tailscale.com> * logtail: use %q, raw strings, and io.WriteString %q escapes binary characters for us. raw strings avoid so much backslash escaping Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Brad Fitzpatrick	b987b2ab18	control/controlclient: treat node sharer as owner for display purposes This make clients (macOS, Windows, tailscale status) show the node sharer's profile rather than the node owner (which may be anonymized). Updates #992	3 years ago
Brad Fitzpatrick	7acd3397d5	README: names of contributors, link to them instead	3 years ago
Brad Fitzpatrick	9d73f84a71	tailcfg, control/controlclient: make MapResponse.CollectServices an opt.Bool Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Christina Wen	a746ff5de7	API.md: add documentation for deleting a device Signed-off-by: Christina Wen <christina@tailscale.com>	3 years ago
Christina Wen	8d7ddf5e94	API.md: rename "domain" to "tailnet" Signed-off-by: Christina Wen <christina@tailscale.com>	3 years ago
Denton Gentry	ac42757cd7	netcheck: use reflect in sortRegions test. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	43e060b0e5	netcheck: test sortRegions Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	8349e10907	magicsock: add description of testClosingContext Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	b771a1363b	logtail: start a local server for TestFastShutdown Right now TestFastShutdown tries to upload logs to localhost:1234, which will most likely respond with an error. However if one has an actual service running on port 1234, it would receive a connection attempting to POST every time the unit test runs. Start a local server and direct the upload there instead. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	2e9728023b	magicsock: test error case in sendDiscoMessage In sendDiscoMessage there is a check of whether the connection is closed, which is not being reliably exercised by other tests. This shows up in code coverage reports, the lines of code in sendDiscoMessage are alternately added and subtracted from code coverage. Add a test to specifically exercise and verify this code path. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	2c328da094	logtail: add a test to upload logs to local server Start an HTTP server to accept POST requests, and upload some logs to it. Check that uploaded logs were received. Code in logtail:drainPending was not being reliably exercised by other tests. This shows up in code coverage reports, as lines of code in drainPending are alternately added and subtracted from code coverage. This test will reliably exercise and verify this code. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	0aed59b691	portlist: add a test for SameInodes Exercise all cases. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	07e4009e15	portlist: fully exercise lessThan in tests All cases in lessThan are not reliably exercised by other tests. This shows up in code coverage metrics as lines in lessThan are alternately added and removed from coverage. Add a test case to systematically test all conditions. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	0aa55bffce	magicsock: test error case in derpWriteChanOfAddr In derpWriteChanOfAddr when we call derphttp.NewRegionClient(), there is a check of whether the connection is already errored and if so it returns before grabbing the lock. The lock might already be held and would be a deadlock. This corner case is not being reliably exercised by other tests. This shows up in code coverage reports, the lines of code in derpWriteChanOfAddr are alternately added and subtracted from code coverage. Add a test to specifically exercise this code path, and verify that it doesn't deadlock. This is the best tradeoff I could come up with: + the moment code calls Err() to check if there is an error, we grab the lock to make sure it would deadlock if it tries to grab the lock itself. + if a new call to Err() is added in this code path, only the first one will be covered and the rest will not be tested. + this test doesn't verify whether code is checking for Err() in the right place, which ideally I guess it would. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Brad Fitzpatrick	85e54af0d7	wgengine: on TCP connect fail/timeout, log some clues about why it failed So users can see why things aren't working. A start. More diagnostics coming. Updates #1094	3 years ago
Brad Fitzpatrick	5eeaea9ef9	net/packet: add TCPFlag type and some more constants Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ad3fb6125d	net/flowtrack: add Tuple.String method Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d6e9fb1df0	all: adjust Unix permissions for those without umasks Fixes tailscale/corp#1165 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	6b08303b0f	Dockerfile: add big warning banner Updates #504	3 years ago
Brad Fitzpatrick	676b5b7946	net/netcheck: improve the preferred DERP hysteresis Users in Amsterdam (as one example) were flipping back and forth between equidistant London & Frankfurt relays too much. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Sonia Appasamy	024671406b	ipn: only send services in Hostinfo if Tailnet has opted-in to services collection (#1107 ) Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	3 years ago
Brad Fitzpatrick	f85769b1ed	wgengine/magicsock: drop netaddr.IPPort cache netaddr.IP no longer allocates, so don't need a cache or all its associated code/complexity. This totally removes groupcache/lru from the deps. Also go mod tidy.	3 years ago
Brad Fitzpatrick	a80446c026	Update depaware (removes lru from wgengine/filter)	3 years ago
Brad Fitzpatrick	4d15e954bd	net/flowtrack: add new package to specialize groupcache/lru key type Reduces allocs. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Naman Sood	f69e46175d	wengine/netstack: bump gvisor to latest version * wengine/netstack: bump gvisor to latest version Signed-off-by: Naman Sood <naman@tailscale.com> * update dependencies Signed-off-by: Naman Sood <naman@tailscale.com> * Don't change hardcoded IP Signed-off-by: Naman Sood <naman@tailscale.com>	3 years ago
Brad Fitzpatrick	8b0112649a	wgengine/netstack: don't build netstack on 32-bit platforms See google/gvisor#5241	3 years ago
Brad Fitzpatrick	5aa5db89d6	cmd/tailscaled, wgengine/netstack: add start of gvisor userspace netstack work Not usefully functional yet (mostly a proof of concept), but getting it submitted for some work @namansood is going to do atop this. Updates #707 Updates #634 Updates #48 Updates #835	3 years ago
Brad Fitzpatrick	5efb0a8bca	cmd/tailscale: change formatting of "tailscale status" * show DNS name over hostname, removing domain's common MagicDNS suffix. only show hostname if there's no DNS name. but still show shared devices' MagicDNS FQDN. * remove nerdy low-level details by default: endpoints, DERP relay, public key. They're available in JSON mode still for those who need them. * only show endpoint or DERP relay when it's active with the goal of making debugging easier. (so it's easier for users to understand what's happening) The asterisks are gone. * remove Tx/Rx numbers by default for idle peers; only show them when there's traffic. * include peers' owner login names * add CLI option to not show peers (matching --self=true, --peers= also defaults to true) * sort by DNS/host name, not public key * reorder columns	3 years ago

1 2 3 4 5 ...

1611 Commits (d2529affa2aada22fc88b71c246f8d95932f5b17) All Branches Search

1611 Commits (d2529affa2aada22fc88b71c246f8d95932f5b17)

All Branches