tailscale

Commit Graph

Author	SHA1	Message	Date
Avery Pennarun	a496cdc943	router_linux: remove need for iptables.ListChains(). Instead of retrieving the list of chains, or the list of rules in a chain, just try deleting the ones we don't want and then adding the ones we do want. An error in flushing/deleting still means the rule doesn't exist anymore, so there was no need to check for it first. This avoids the need to parse iptables output, which avoids the need to ever call iptables -S, which fixes #403, among other things. It's also much more future proof in case the iptables command line changes. Unfortunately the iptables go module doesn't properly pass the iptables command exit code back up when doing .Delete(), so we can't correctly check the exit code there. (exit code 1 really means the rule didn't exist, rather than some other weird problem). Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	8a6bd21baf	router_linux: extract process runner routines into runner.go. These will probably be useful across platforms. They're not really Linux-specific at all. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	34c30eaea0	router_linux: use only baseline 'ip rule' features that exist in old kernels. This removes the use of suppress_ifgroup and fwmark "x/y" notation, which are, among other things, not available in busybox and centos6. We also use the return codes from the 'ip' program instead of trying to parse its output. I also had to remove the previous hack that routed all of 100.64.0.0/10 by default, because that would add the /10 route into the 'main' route table instead of the new table 88, which is no good. It was a terrible hack anyway; if we wanted to capture that route, we should have captured it explicitly as a subnet route, not as part of the addr. Note however that this change affects all platforms, so hopefully there won't be any surprises elsewhere. Fixes #405 Updates #320, #144 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	85d93fc4e3	cmd/tailscale: make ip_forward warnings more actionable. Let's actually list the file we checked (/proc/sys/net/ipv4/ip_forward). That gives the admin something specific to look for when they get this message. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	99aa33469e	cmd/tailscale: be quiet when no interaction or errors are needed. We would print a message about "nothing more to do", which some people thought was an error or warning. Let's only print a message after authenticating if we previously asked for interaction, and let's shorten that message to just "Success," which is what it means. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	30e5c19214	magicsock: work around race condition initializing .Regions[]. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	7cd9ff3dde	net/netcheck: fix race condition initializting RegionLatency maps. Under some conditions, code would try to look things up in the maps before the first call to updateLatency. I don't see any reason to delay initialization of the maps, so let's just init them right away when creating the Report instance. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	5eb09c8f5e	filch_test: clarify the use of os.RemoveAll(). Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Brad Fitzpatrick	afb9c6a6ab	control/controlclient: use "getprop net.hostname" for Android hostname Updates #409	4 years ago
David Anderson	2b74236567	ipn: move e2e_test back to corp repo. It depends on corp things, so can't run here anyway. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	557b310e67	control/controlclient: move auto_test back to corp repo. It can't run without corp stuff anyway, and makes it harder to refactor the control server.	4 years ago
Dmytro Shynkevych	737124ef70	tstun: tolerate zero reads Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
David Anderson	7317e73bf4	control/controlclient: move direct_test back to corp repo. It can only be built with corp deps anyway, and having it split from the control code makes our lives harder. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Dmytro Shynkevych	7508b67c54	cmd/tailscale: expose --enable-derp Signed-off-by: Dmytro Shynkevych <dm.shynk@gmail.com>	4 years ago
Brad Fitzpatrick	703d789005	tailcfg: add MapResponse.Debug mechanism to trigger logging heap pprof Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	b0c10fa610	stun, netcheck: move under net	4 years ago
Brad Fitzpatrick	43ded2b581	wgengine/packet: add some tests, more docs, minor Go style, performance changes	4 years ago
Brad Fitzpatrick	3f4a567032	types/strbuilder: add a variant of strings.Builder that uses sync.Pool ... and thus does not need to worry about when it escapes into unprovable fmt interface{} land. Also, add some convenience methods for efficiently writing integers.	4 years ago
Brad Fitzpatrick	e6b84f2159	all: make client use server-provided DERP map, add DERP region support Instead of hard-coding the DERP map (except for cmd/tailscale netcheck for now), get it from the control server at runtime. And make the DERP map support multiple nodes per region with clients picking the first one that's available. (The server will balance the order presented to clients for load balancing) This deletes the stunner package, merging it into the netcheck package instead, to minimize all the config hooks that would've been required. Also fix some test flakes & races. Fixes #387 (Don't hard-code the DERP map) Updates #388 (Add DERP region support) Fixes #399 (wgengine: flaky tests) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	e8b3a5e7a1	wgengine/filter: implement a destination IP pre-filter. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	35a8586f7e	go.sum: go mod tidy	4 years ago
Avery Pennarun	3ed2124356	ipn: Resolve some resource leaks in test. Updates tailscale/corp#255. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	ea8f92b312	ipn/local: get rid of some straggling calls to the log module. Use b.logf() instead. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	af9328c1b7	log rate limiting: reformat limiter messages, and use nonempty burst size. - Reformat the warning about a message being rate limited to print the format string, rather than the formatted message. This helps give a clue what "type" of message is being limited. - Change the rate limit warning to be [RATE LIMITED] in all caps. This uses less space on each line, plus is more noticeable. - In tailscaled, change the frequency to be less often (once every 5 seconds per format string) but to allow bursts of up to 5 messages. This greatly reduces the number of messages that are rate limited during startup, but allows us to tighten the limit even further during normal runtime. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	f2db4ac277	cmd/tailscaled: SetGCPercent() if GOGC is not set. This cuts RSS from ~30MB to ~20MB on my machine, after the previous fix to get rid of unnecessary zstd buffers. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	db051fb013	ipnserver and logpolicy: configure zstd with low-memory settings. The compressed blobs we send back and forth are small and infrequent, which doesn't justify the 8MB * GOMAXPROCS memory that was being allocated. This was the overwhelming majority of memory use in tailscaled. On my system it goes from ~100M RSS to ~15M RSS (which is still suspiciously high, but we can worry about that more later). Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	d074ec6571	cmd/tailscaled: eliminate unnecessary use of an init() function. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	c5fcc38bf1	controlclient tests: fix more memory leaks and add resource checking. I can now run these tests with -count=1000 without running out of RAM. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	d03de31404	controlclient/direct: fix a race condition accessing auth keys. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	1013cda799	controlclient/auto_test: don't print the s.control object. This contains atomic ints that trigger a race check error if we access them non-atomically. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	806de4ac94	portlist: fix "readdirent: no such file or directory" errors on Linux. This could happen when a process disappeared while we were reading its file descriptor list. I was able to replicate the problem by running this in another terminal: while :; do for i in $(seq 10); do /bin/true & done >&/dev/null; wait >&/dev/null; done And then running the portlist tests thousands of times. Fixes #339. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
David Anderson	c97c45f268	ipn: sprinkle documentation and clarity rewrites through LocalBackend. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	39d20e8a75	go.mod: bump wireguard-go version.	4 years ago
David Anderson	cd2f6679bb	go.mod: bump wireguard-go version. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	7fb33123d3	wgengine/router: warn about another variation of busybox's `ip`. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Wendi Yu	bb55694c95	wgengine: log node IDs when peers are added/removed (#381 ) Also stop logging data sent/received from nodes we're not connected to (ie all those `x`s being logged in the `peers: ` line) Signed-off-by: Wendi <wendi.yu@yahoo.ca>	4 years ago
Dmytro Shynkevych	635f7b99f1	wgengine: pass tun.NativeDevice to router Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
David Anderson	9c914dc7dd	wgengine/router: stop using -m comment. The comment module is compiled out on several embedded systems (and also gentoo, because netfilter can't go brrrr with comments holding it back). Attempting to use comments results in a confusing error, and a non-functional firewall. Additionally, make the legacy rule cleanup non-fatal, because we do have to probe for the existence of these -m comment rules, and doing so will error out on these systems. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	3e27b3c33c	wgengine/router: more comments. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	0fe262f093	ipn: plumb NetfilterMode all the way out to the CLI. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	c67c8913c3	wgengine/router: add a test for linux router state transitions. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	292606a975	wgengine/router: support multiple levels of netfilter involvement. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	cff53c6e6d	tailcfg: add DERP map structures Updates #387 Updates #388 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	5ec7ac1d02	tstest: document PanicOnLog	4 years ago
Brad Fitzpatrick	e6d0c92b1d	wgengine/magicsock: clean up earlier fix a bit Move WaitReady from `fc88e34f42` into the test code, and keep the derp-reading goroutine named for debugging.	4 years ago
Avery Pennarun	d0754760e7	controlclient/auto_test: fix flake "peer OS is not linux" on macOS. We were mis-counting the number of Synchronized messages that we should have been generating.	4 years ago
Avery Pennarun	8f8607b6bf	control/controlclient/auto_test: clean up logging to defeat 'go test' idiocy. By default, nothing differentiates errors or fatals from regular logs, so they just blend into the rest of the logs. As a bonus, if you run a test using t.Run(), the log messages printed via the sub-t.Run() are printed at a different time from log messages printed via the parent t.Run(), making debugging almost impossible. This doesn't actually fix the test flake I'm looking for, but at least I can find it in the logs now. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	d53e8fc0da	router_darwin_support: we can build this on every platform. Our new build scripts try to build ipn-go-bridge on more than just linux and darwin, so let's enable this file so it can be successful on every platform.	4 years ago
Avery Pennarun	3b1ce30967	Merge branch 'master' of github.com:tailscale/tailscale * 'master' of github.com:tailscale/tailscale: derp/derphttp: don't use x/net/proxy for SOCKS on iOS	4 years ago
Avery Pennarun	286f96e412	control/controlclient: fix a very rare httptest.Server log.Printf. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago

1 2 3 4 5 ...

696 Commits (a496cdc943e7bf49c283f455b66373e04b5b026f) All Branches Search

696 Commits (a496cdc943e7bf49c283f455b66373e04b5b026f)

All Branches