893 Commits (61c62f48d9b129ae8cb3a2bd751a5d7bf50248e5)

Author	SHA1	Message	Date
Avery Pennarun	a7fe1d7c46	wgengine/bench: improved rate selection. ... The old decay-based one took a while to converge. This new one (based very loosely on TCP BBR) seems to converge quickly on what seems to be the best speed. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	3 years ago
Avery Pennarun	a92b9647c5	wgengine/bench: speed test for channels, sockets, and wireguard-go. ... This tries to generate traffic at a rate that will saturate the receiver, without overdoing it, even in the event of packet loss. It's unrealistically more aggressive than TCP (which will back off quickly in case of packet loss) but less silly than a blind test that just generates packets as fast as it can (which can cause all the CPU to be absorbed by the transmitter, giving an incorrect impression of how much capacity the total system has). Initial indications are that a syscall about every 10 packets (TCP bulk delivery) is roughly the same speed as sending every packet through a channel. A syscall per packet is about 5x-10x slower than that. The whole tailscale wireguard-go + magicsock + packet filter combination is about 4x slower again, which is better than I thought we'd do, but probably has room for improvement. Note that in "full" tailscale, there is also a tundev read/write for every packet, effectively doubling the syscall overhead per packet. Given these numbers, it seems like read/write syscalls are only 25-40% of the total CPU time used in tailscale proper, so we do have significant non-syscall optimization work to do too. Sample output: $ GOMAXPROCS=2 go test -bench . -benchtime 5s ./cmd/tailbench goos: linux goarch: amd64 pkg: tailscale.com/cmd/tailbench cpu: Intel(R) Core(TM) i7-4785T CPU @ 2.20GHz BenchmarkTrivialNoAlloc/32-2 56340248 93.85 ns/op 340.98 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTrivialNoAlloc/124-2 57527490 99.27 ns/op 1249.10 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTrivialNoAlloc/1024-2 52537773 111.3 ns/op 9200.39 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTrivial/32-2 41878063 135.6 ns/op 236.04 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTrivial/124-2 41270439 138.4 ns/op 896.02 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTrivial/1024-2 36337252 154.3 ns/op 6635.30 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkBlockingChannel/32-2 12171654 494.3 ns/op 64.74 MB/s 0 %lost 1791 B/op 0 allocs/op BenchmarkBlockingChannel/124-2 12149956 507.8 ns/op 244.17 MB/s 0 %lost 1792 B/op 1 allocs/op BenchmarkBlockingChannel/1024-2 11034754 528.8 ns/op 1936.42 MB/s 0 %lost 1792 B/op 1 allocs/op BenchmarkNonlockingChannel/32-2 8960622 2195 ns/op 14.58 MB/s 8.825 %lost 1792 B/op 1 allocs/op BenchmarkNonlockingChannel/124-2 3014614 2224 ns/op 55.75 MB/s 11.18 %lost 1792 B/op 1 allocs/op BenchmarkNonlockingChannel/1024-2 3234915 1688 ns/op 606.53 MB/s 3.765 %lost 1792 B/op 1 allocs/op BenchmarkDoubleChannel/32-2 8457559 764.1 ns/op 41.88 MB/s 5.945 %lost 1792 B/op 1 allocs/op BenchmarkDoubleChannel/124-2 5497726 1030 ns/op 120.38 MB/s 12.14 %lost 1792 B/op 1 allocs/op BenchmarkDoubleChannel/1024-2 7985656 1360 ns/op 752.86 MB/s 13.57 %lost 1792 B/op 1 allocs/op BenchmarkUDP/32-2 1652134 3695 ns/op 8.66 MB/s 0 %lost 176 B/op 3 allocs/op BenchmarkUDP/124-2 1621024 3765 ns/op 32.94 MB/s 0 %lost 176 B/op 3 allocs/op BenchmarkUDP/1024-2 1553750 3825 ns/op 267.72 MB/s 0 %lost 176 B/op 3 allocs/op BenchmarkTCP/32-2 11056336 503.2 ns/op 63.60 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTCP/124-2 11074869 533.7 ns/op 232.32 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTCP/1024-2 8934968 671.4 ns/op 1525.20 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkWireGuardTest/32-2 1403702 4547 ns/op 7.04 MB/s 14.37 %lost 467 B/op 3 allocs/op BenchmarkWireGuardTest/124-2 780645 7927 ns/op 15.64 MB/s 1.537 %lost 420 B/op 3 allocs/op BenchmarkWireGuardTest/1024-2 512671 11791 ns/op 86.85 MB/s 0.5206 %lost 411 B/op 3 allocs/op PASS ok tailscale.com/wgengine/bench 195.724s Updates #414. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	3 years ago
Maisem Ali	590792915a	wgengine/router{win}: ignore broadcast routes added by Windows when removing routes. ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Josh Bleecher Snyder	8d7f7fc7ce	health, wgenegine: fix receive func health checks yet again ... The existing implementation was completely, embarrassingly conceptually broken. We aren't able to see whether wireguard-go's receive function goroutines are running or not. All we can do is model that based on what we have done. This commit fixes that model. Fixes #1781 Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	5835a3f553	health, wgengine/magicsock: avoid receive function false positives ... Avery reported a sub-ms health transition from "receiveIPv4 not running" to "ok". To avoid these transient false-positives, be more precise about the expected lifetime of receive funcs. The problematic case is one in which they were started but exited prior to a call to connBind.Close. Explicitly represent started vs running state, taking care with the order of updates. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	f845aae761	health: track whether magicsock receive functions are running ... Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Brad Fitzpatrick	12b4672add	wgengine: quiet connection failure diagnostics for exit nodes ... The connection failure diagnostic code was never updated enough for exit nodes, so disable its misleading output when the node it picks (incorrectly) to diagnose is only an exit node. Fixes #1754 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	a29b0cf55f	wgengine/wglog: allow wireguard-go receive routines to log ... I've spent two days searching for a theoretical wireguard-go bug around receive functions exiting early. I've found many bugs, but none of the flavor we're looking for. Restore wireguard-go's logging around starting and stopping receive functions, so that we can definitively rule in or out this particular theory. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	eb2a9d4ce3	wgengine/netstack: log error when acceptUDP fails ... I see a bunch of these in some logs I'm looking at, separated only by a few seconds. Log the error so we can tell what's going on here. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Naman Sood	4a90a91d29	wgengine/netstack: log ForwarderRequest in readable form, only in debug mode (#1758) ... * wgengine/netstack: log ForwarderRequest in readable form, only in debug mode Fixes #1757 Signed-off-by: Naman Sood <mail@nsood.in>	3 years ago
Josh Bleecher Snyder	07c95a0219	wgengine/wgcfg/nmcfg: consolidate exit node log lines ... These were getting rate-limited for nodes with many peers. Consolate the output into single lines, which are nicer anyway. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	48e30bb8de	wgengine/magicsock: remove named return ... Doesn't add anything. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	a2a2c0ce1c	wgengine/magicsock: fix two comments ... Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	b1e624ef04	wgengine/magicsock: remove unnecessary type assertions ... Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	98714e784b	wgengine/magicsock: improve Rebind logging ... We were accidentally logging oldPort -> oldPort. Log oldPort as well as c.port; if we failed to get the preferred port in a previous rebind, oldPort might differ from c.port. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	15ceacc4c5	wgengine/magicsock: accept a host and port instead of an addr in listenPacket ... This simplifies call sites and prevents accidental failure to use net.JoinHostPort. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Brad Fitzpatrick	b993d9802a	ipn/ipnlocal, etc: require file sharing capability to send/recv files ... tailscale/corp#1582 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	4f3203556d	wgengine/router: add the Tailscale ULA route on darwin. ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	762180595d	ipn/ipnstate: add PeerStatus.TailscaleIPs slice, deprecate TailAddr ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	34d2f5a3d9	tailcfg: add Endpoint, EndpointType, MapRequest.EndpointType ... Track endpoints internally with a new tailcfg.Endpoint type that includes a typed netaddr.IPPort (instead of just a string) and includes a type for how that endpoint was discovered (STUN, local, etc). Use []tailcfg.Endpoint instead of []string internally. At the last second, send it to the control server as the existing []string for endpoints, but also include a new parallel MapRequest.EndpointType []tailcfg.EndpointType, so the control server can start filtering out less-important endpoint changes from new-enough clients. Notably, STUN-discovered endpoints can be filtered out from 1.6+ clients, as they can discover them amongst each other via CallMeMaybe disco exchanges started over DERP. And STUN endpoints change a lot, causing a lot of MapResposne updates. But portmapped endpoints are worth keeping for now, as they they work right away without requiring the firewall traversal extra RTT dance. End result will be less control->client bandwidth. (despite negligible increase in client->control bandwidth) Updates tailscale/corp#1543 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	1b9d8771dc	ipn/ipnlocal,wgengine/router,cmd/tailscale: add flag to allow local lan access when routing traffic via an exit node. ... For #1527 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
David Anderson	854d5d36a1	net/dns: return error from NewOSManager, use it to initialize NM. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	d5d70ae9ea	wgengine/monitor: reduce Linux log spam on down ... Fixes #1689 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	84430cdfa1	net/dns: improve NetworkManager detection, using more DBus. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	19eca34f47	wgengine/router: fix FreeBSD configuration failure on the v6 /48. ... On FreeBSD, we add the interface IP as a /48 to work around a kernel bug, so we mustn't then try to add a /48 route to the Tailscale ULA, since that will fail as a dupe. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	4a64d2a603	net/dns: some post-review cleanups. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	68f76e9aa1	net/dns: add GetBaseConfig to OSConfigurator interface. ... Part of #953, required to make split DNS work on more basic platforms. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	d488678fdc	cmd/tailscaled, wgengine{,/netstack}: add netstack hybrid mode, add to Windows ... For #707 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	3089081349	monitor/polling: reduce Cloud Run polling interval. ... Cloud Run's routes never change at runtime. Don't poll it for route changes very often. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
David Anderson	de6dc4c510	net/dns: add a Primary field to OSConfig. ... Currently ignored. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	7d84ee6c98	net/dns: unify the OS manager and internal resolver. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	1bf91c8123	net/dns/resolver: remove unused err return value. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	f007a9dd6b	health: add DNS subsystem and plumb errors in. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	4c61ebacf4	wgengine: move DNS configuration out of wgengine/router. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	ba72126b72	wgengine/magicsock: remove RebindingUDPConn.FakeClosed ... It existed to work around the frequent opening and closing of the conn.Bind done by wireguard-go. The preceding commit removed that behavior, so we can simply close the connections when we are done with them. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	69cdc30c6d	wgengine/wgcfg: remove Config.ListenPort ... We don't use the port that wireguard-go passes to us (via magicsock.connBind.Open). We ignore it entirely and use the port we selected. When we tell wireguard-go that we're changing the listen_port, it calls connBind.Close and then connBind.Open. And in the meantime, it stops calling the receive functions, which means that we stop receiving and processing UDP and DERP packets. And that is Very Bad. That was never a problem prior to b3ceca1dd7, because we passed the SkipBindUpdate flag to our wireguard-go fork, which told wireguard-go not to re-bind on listen_port changes. That commit eliminated the SkipBindUpdate flag. We could write a bunch of code to work around the gap. We could add background readers that process UDP and DERP packets when wireguard-go isn't. But it's simpler to never create the conditions in which wireguard-go rebinds. The other scenario in which wireguard-go re-binds is device.Down. Conveniently, we never call device.Down. We go from device.Up to device.Close, and the latter only when we're shutting down a magicsock.Conn completely. Rubber-ducked-by: Avery Pennarun <apenwarr@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Anderson	27a1a2976a	wgengine/router: add a CallbackRouter shim. ... The shim implements both network and DNS configurators, and feeds both into a single callback that receives both configs. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	b3ceca1dd7	wgengine/...: split into multiple receive functions ... Upstream wireguard-go has changed its receive model. NewDevice now accepts a conn.Bind interface. The conn.Bind is stateless; magicsock.Conns are stateful. To work around this, we add a connBind type that supports cheap teardown and bring-up, backed by a Conn. The new conn.Bind allows us to specify a set of receive functions, rather than having to shoehorn everything into ReceiveIPv4 and ReceiveIPv6. This lets us plumbing DERP messages directly into wireguard-go, instead of having to mux them via ReceiveIPv4. One consequence of the new conn.Bind layer is that closing the wireguard-go device is now indistinguishable from the routine bring-up and tear-down normally experienced by a conn.Bind. We thus have to explicitly close the magicsock.Conn when the close the wireguard-go device. One downside of this change is that we are reliant on wireguard-go to call receiveDERP to process DERP messages. This is fine for now, but is perhaps something we should fix in the future. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Anderson	6ad44f9fdf	wgengine: take in dns.Config, split out to resolver.Config and dns.OSConfig. ... Stepping stone towards having the DNS package handle the config splitting. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	8af9d770cf	net/dns: rename Config to OSConfig. ... Making way for a new higher level config struct. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	fcfc0d3a08	net/dns: remove ManagerConfig, pass relevant args directly. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	f77ba75d6c	wgengine/router: move DNS cleanup into the DNS package. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	15875ccc63	wgengine/router: don't store unused tunname on windows.	3 years ago
Josh Bleecher Snyder	34d4943357	all: gofmt -s ... The code is not obviously better or worse, but this makes the little warning triangle in my editor go away, and the distraction removal is worth it. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	1df162b05b	wgengine/magicsock: adapt CreateEndpoint signature to match wireguard-go ... Part of a temporary change to make merging wireguard-go easier. See https://github.com/tailscale/wireguard-go/pull/45. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	e64383a80e	wgengine/router: document some fields a bit more ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	35ab4020c7	wgengine/monitor: Linux fall back to polling ... Google Cloud Run does not implement NETLINK_ROUTE RTMGRP. If initialization of the netlink socket or group membership fails, fall back to a polling implementation. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
David Anderson	90f82b6946	net/dns/resolver: add live reconfig, plumb through to ipnlocal. ... The resolver still only supports a single upstream config, and ipn/wgengine still have to split up the DNS config, but this moves closer to unifying the DNS configs. As a handy side-effect of the refactor, IPv6 MagicDNS records exist now. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	f185d62dc8	net/dns/resolver: unexport Packet, only use it internally. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	5fb9e00ecf	net/dns/resolver: remove Start method, fully spin up in New instead. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	075fb93e69	net/dns/resolver: remove the Config struct. ... In preparation for reintroducing a runtime reconfig Config struct. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	bc81dd4690	net/dns/resolver: rename ResolverConfig to just Config. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	d99f5b1596	net/dns/resolver: factor the resolver out into a sub-package. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Naman Sood	31c7745631	wgengine/netstack: stop re-adding IPs registered by active TCP connections (#1629) ... Signed-off-by: Naman Sood <mail@nsood.in>	3 years ago
Brad Fitzpatrick	7f03c0f8fe	wgengine/wgcfg/nmcfg: reduce some logging when a /0 route skipped ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	7b907615d5	wgengine/wgcfg/nmcfg: remove dead code ... The call to appendEndpoint updates cpeer.Endpoints. Then it is overwritten in the next line. The only errors from appendEndpoint occur when the host/port pair is malformed, but that cannot happen. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	36a85e1760	wgengine/magicsock: don't call t.Fatal in magicStack.IP ... It can end up executing an a new goroutine, at which point instead of immediately stopping test execution, it hangs. Since this is unexpected anyway, panic instead. As a bonus, it makes call sites nicer and removes a kludge comment. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	4c83bbf850	wgengine: add IsNetstack func and test ... So we have a documented & tested way to check whether we're in netstack mode. To be used by future commits. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	91bc723817	wgengine: add temp workaround for netstack WhoIs registration race ... Updates #1616 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	41e4e02e57	net/{packet,tstun}: send peerapi port in TSMP pongs ... For discovery when an explicit hostname/IP is known. We'll still also send it via control for finding peers by a list. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Naman Sood	662fbd4a09	wgengine/netstack: Allow userspace networking mode to expose subnets (#1588) ... wgengine/netstack: Allow userspace networking mode to expose subnets Updates #504 Updates #707 Signed-off-by: Naman Sood <mail@nsood.in>	3 years ago
Brad Fitzpatrick	a4c679e646	wgengine/monitor: on wall time jump, synthesize network change event ... ... to force rebinds of TCP connections Fixes #1555 Updates tailscale/felicity#4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	07bf4eb685	wgengine: rename Fake to RespondToPing. ... "Fake" doesn't mean a lot any more, given that many components of the engine can be faked out, including in valid production configurations like userspace-networking. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	0fb738760f	wgengine: make Tun optional again, default to fake. ... This makes setup more explicit in prod codepaths, without requiring a bunch of arguments or helpers for tests and userspace mode. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	e18c3a7d84	wgengine: optimize isLocalAddr a bit ... On macOS/iOS, this removes a map lookup per outgoing packet. Noticed it while reading code, not from profiles, but can't hurt. BenchmarkGenLocalAddrFunc BenchmarkGenLocalAddrFunc/map1 BenchmarkGenLocalAddrFunc/map1-4 16184868 69.78 ns/op BenchmarkGenLocalAddrFunc/map2 BenchmarkGenLocalAddrFunc/map2-4 16878140 70.73 ns/op BenchmarkGenLocalAddrFunc/or1 BenchmarkGenLocalAddrFunc/or1-4 623055721 1.950 ns/op BenchmarkGenLocalAddrFunc/or2 BenchmarkGenLocalAddrFunc/or2-4 472493098 2.589 ns/op Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	93a4aa697c	wgengine: default Router to a no-op router. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	440effb21a	wgengine: remove Config.TUN argument.	3 years ago
Josh Bleecher Snyder	4954fbfda6	wgengine: extend TestWatchdog timeout on macOS ... This works around the close syscall being slow. We can revert this if we find a fix or if Apple makes close fast again. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Anderson	2df8adef9d	wgengine: make the tun.Device required at construction. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	016de16b2e	net/tstun: rename TUN to Wrapper. ... The tstun packagen contains both constructors for generic tun Devices, and a wrapper that provides additional functionality. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	82ab7972f4	net/tstun: rename NewFakeTUN to NewFake. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	588b70f468	net/tstun: merge in wgengine/tstun. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	2b4bfeda1a	wgengine: pass in an explicit router.Router, rather than a generator. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	44d9929208	wgengine: remove Config.TUNName, require caller to create device. ... Also factors out device creation and associated OS workarounds to net/tun. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	0a84aaca0a	wgengine/router: remove unused wireguard *Device argument. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	bcf571ec97	wgengine/monitor: fix OpenBSD build ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7f174e84e6	net/interfaces: remove mutating methods, add EqualFiltered instead ... Now callers (wgengine/monitor) don't need to mutate the state to remove boring interfaces before calling State.Equal. Instead, the methods to remove boring interfaces from the State are removed, as is the reflect-using Equal method itself, and in their place is a new EqualFiltered method that takes a func predicate to match interfaces to compare. And then the FilterInteresting predicate is added for use with EqualFiltered to do the job that that wgengine/monitor previously wanted. Now wgengine/monitor can keep the full interface state around, including the "boring" interfaces, which we'll need for peerapi on macOS/iOS to bind to the interface index of the utunN device. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	672731ac6f	many: gofmt. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	6521f02ff6	Move DNS flush logic to net/dns. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	9f7f2af008	wgengine/router/dns: move to net/dns. ... Preparation for merging the APIs and whatnot. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	8432999835	Move wgengine/tsdns to net/dns. ... Straight move+fixup, no other changes. In prep for merging with wgengine/router/dns. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	81143b6d9a	ipn/ipnlocal: start of peerapi between nodes ... Also some necessary refactoring of the ipn/ipnstate too. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	28af46fb3b	wgengine: pass logger as a separate arg to device.NewDevice ... Adapt to minor API changes in wireguard-go. And factor out device.DeviceOptions variables. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	2384c112c9	net/packet, wgengine/{filter,tstun}: add TSMP ping ... Fixes #1467 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	4b77eca2de	wgengine/magicsock: check returned error in addTestEndpoint ... Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	c99f260e40	wgengine/magicsock: prefer IPv6 transport if roughly equivalent latency ... Fixes #1566 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e2b3d9aa5f	all: s/Magic DNS/MagicDNS/ for consistency ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	9643d8b34d	wgengine/magicsock: add an addrLatency type to combine an IPPort+time.Duration ... Updates #1566 (but no behavior changes as of this change) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	96dfeb2d7f	wgengine: log tailscale pings ... Fixes #1561 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	85138d3183	health: track whether any network interface is up ... Fixes #1562 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	0994a9f7c4	wgengine{,/magicsock}: fix, improve "tailscale ping" to default routes and subnets ... e.g. $ tailscale ping 1.1.1.1 exit node found but not enabled $ tailscale ping 10.2.200.2 node "tsbfvlan2" found, but not using its 10.2.200.0/24 route $ sudo tailscale up --accept-routes $ tailscale ping 10.2.200.2 pong from tsbfvlan2 (100.124.196.94) via 10.2.200.34:41641 in 1ms $ tailscale ping mon.ts.tailscale.com pong from monitoring (100.88.178.64) via DERP(sfo) in 83ms pong from monitoring (100.88.178.64) via DERP(sfo) in 21ms pong from monitoring (100.88.178.64) via [2604:a880:4:d1::37:d001]:41641 in 22ms This necessarily moves code up from magicsock to wgengine, so we can look at the actual wireguard config. Fixes #1564 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7e0d12e7cc	wgengine/magicsock: don't update control if only endpoint order changes ... Updates #1559 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	1eb95c7e32	net/packet, wgengine{,/filter}: remove net/packet IPProto forwarding consts ... Only use the ones in types/ipproto now. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	01b90df2fa	net/packet, wgengine/filter: support SCTP ... Add proto to flowtrack.Tuple. Add types/ipproto leaf package to break a cycle. Server-side ACL work remains. Updates #1516 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	90a6fb7ffe	tailcfg: add FilterRule.IPProto ... Updates #1516 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	32562a82a9	wgengine/magicsock: annotate a few more disco logs as verbose ... Fixes #1540 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c19ed37b0f	wgengine/magicsock: mark some legacy debug log output as verbose ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	aa79a57f63	wgengine/netstack: use inet.af/netstack, remove 64-bit only limitation ... This reverts the revert commit 84aba349d9. And changes us to use inet.af/netstack. Updates #1518 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	84aba349d9	Revert "wgengine/netstack: update gvisor to remove 64-bit only limitation" ... Breaks our corp repo due to gRPC dependency hell. This reverts commit d42f8b7f9a.	3 years ago
Brad Fitzpatrick	e0f2796b43	wgengine: don't diagnose iOS NWPathMonitor connection probe timeouts ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	0f90586da8	wgengine/monitor: skip more route messages on darwin ... Should help iOS battery life on NEProvider.wake/skip events with useless route updates that shouldn't cause re-STUNs. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d42f8b7f9a	wgengine/netstack: update gvisor to remove 64-bit only limitation ... gVisor fixed their google/gvisor#1446 so we can include gVisor mode on 32-bit machines. A few minor upstream API changes, as normal. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	232cfda280	wgengine/router: report to control when setPrivateNetwork fails ... Fixes #1503 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ba8c6d0775	health, controlclient, ipn, magicsock: tell health package state of things ... Not yet checking anything. Just plumbing states into the health package. Updates #1505 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Naman Sood	770aa71ffb	client, cmd/hello, ipn, wgengine: fix whois for netstack-forwarded connections ... Updates #504 Updates #707 Signed-off-by: Naman Sood <mail@nsood.in>	3 years ago
Brad Fitzpatrick	44ab0acbdb	net/portmapper, wgengine/monitor: cache gateway IP info until link changes ... Cuts down allocs & CPU in steady state (on regular STUN probes) when network is unchanging. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d580b3f09e	wgengine/router: fix go vet failure on BSDs ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Aleksandar Pesic	25d2dd868b	wgengine/router: flushdns in windows when router config changes ... Fixes: https://github.com/tailscale/tailscale/issues/1430 Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>	3 years ago
Brad Fitzpatrick	c81814e4f8	derp{,/derphttp},magicsock: tell DERP server when ping acks can be expected ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f9f3b67f3a	wgengine{,tsdns}: rebind MagicDNS forwarders on link change ... Fixes #1480 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	fa6110e47b	wgengine/router: don't touch interface routes ... Developed by a cast of dozens. Fixes #1448 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	c576fea60e	wgengine/magicsock: delete unused WhoIs method that was moved elsewhere ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	0430c2dd12	wgengine/tsdns: truncate Map.PrettyDiffFrom string at 1KB ... Hello's were painful. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	d79a2f3809	wgengine/filter: only log packets to/from non-default routes. ... Fixes tailscale/corp#1429. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	ef7bac2895	tailcfg, net/portmapper, wgengine/magicsock: add NetInfo.HavePortMap ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	79d8288f0a	wgengine/magicsock, derp, derp/derphttp: respond to DERP server->client pings ... No server support yet, but we want Tailscale 1.6 clients to be able to respond to them when the server can do it. Updates #1310 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	387e83c8fe	wgengine/magicsock: fix Conn.Rebind race that let ErrClosed errors be read ... There was a logical race where Conn.Rebind could acquire the RebindingUDPConn mutex, close the connection, fail to rebind, release the mutex, and then because the mutex was no longer held, ReceiveIPv4 wouldn't retry reads that failed with net.ErrClosed, letting that error back to wireguard-go, which would then stop running that receive IP goroutine. Instead, keep the RebindingUDPConn mutex held for the entirety of the replacement in all cases. Updates tailscale/corp#1289 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	fee74e7ea7	net/interfaces, wgengine/monitor: fix false positives link changes ... interfaces.State.String tries to print a concise summary of the network state, removing any interfaces that don't have any or any interesting IP addresses. On macOS and iOS, for instance, there are a ton of misc things. But the link monitor based its are-there-changes decision on interfaces.State.Equal, which just used reflect.DeepEqual, including comparing all the boring interfaces. On macOS, when turning wifi on or off, there are a ton of misc boring interface changes, resulting in hitting an earlier check I'd added on suspicion this was happening: [unexpected] network state changed, but stringification didn't This fixes that by instead adding a new interfaces.State.RemoveUninterestingInterfacesAndAddresses method that does, uh, that. Then use that in the monitor. So then when Equal is used later, it's DeepEqualing the already-cleaned version with only interesting interfaces. This makes cmd/tailscaled debug --monitor much less noisy. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	04e72f95cc	wgengine/router: add OpenBSD IPv6 support. ... Similar to FreeBSD in https://github.com/tailscale/tailscale/issues/1307, add IPv6 addresses with a prefix length of 48. Fixes https://github.com/tailscale/tailscale/issues/1372 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Brad Fitzpatrick	c445e3d327	wgengine/magicsock: fix typo in comment	3 years ago
Aleksandar Pesic	258d0e8d9a	wgengine/monitor: simplify the Windows monitor to make it more reliable ... Updates tailscale/tailscale#1414 Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>	3 years ago
Naman Sood	4c80344e27	wgengine/netstack: stop UDP forwarding when one side dies ... Updates #504 Updates #707 Signed-off-by: Naman Sood <mail@nsood.in>	3 years ago
Naman Sood	7325b5a7ba	wgengine/netstack: add support for incoming UDP connections ... Updates #504 Updates #707 Signed-off-by: Naman Sood <mail@nsood.in>	3 years ago
Denton Gentry	bcea88da46	wgengine: support FreeBSD with IPv6. ... Fixes https://github.com/tailscale/tailscale/issues/1307 for keepsies. We cannot set the tun interface address as a /128 on FreeBSD, due to https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=218508 Instead we set the interface address as a /48, which is enabled by commit 82edf94df7. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	c8af6bc009	Revert "freebsd: ignore IPv6 for now" ... This reverts commit 061422affc. We have a way to support IPv6 on FreeBSD now. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Brad Fitzpatrick	602f92ec30	wgengine/monitor: log warning if state changes but stringification doesn't ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	a6d098c750	wgengine/magicsock: log when DERP connection succeeds ... Updates #1310	3 years ago
Brad Fitzpatrick	829eb8363a	net/interfaces: sort returned addresses from LocalAddresses ... Also change the type to netaddr.IP while here, because it made sorting easier. Updates tailscale/corp#1397 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ffa70a617d	wgengine{,/monitor}: restore Engine.LinkChange, add Mon.InjectEvent ... The Engine.LinkChange method was recently removed in e3df29d488 while misremembering how Android's link state mechanism worked. Rather than do some last minute rearchitecting of link state on Android before Tailscale 1.6, restore the old Engine.LinkChange hook for now so the Android client doesn't need any changes. But change how it's implemented to instead inject an event into the link monitor. Fixes #1427 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	061422affc	freebsd: ignore IPv6 for now ... FreeBSD tun devices don't work with the way we implement IPv6 https://github.com/tailscale/tailscale/issues/1307 At least for now, remove any IPv6 addresses from the netmap. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
David Anderson	1cb0ffc3ff	wgengine/router: make windows gracefully handle disabled IPv4 or IPv6. ... This is necessary because either protocol can be disabled globally by a Windows registry policy, at which point trying to touch that address family results in "Element not found" errors. This change skips programming address families that Windows tell us are unavailable. Fixes #1396. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	f858b0d25f	wgengine/netstack: remove some v2 logging by default ... Even with [v2], it still logtails and takes time to format. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Naman Sood	d01c60dad5	wgengine/netstack: use system dialer to contact servers on localhost ... Updates #504 Updates #707 Signed-off-by: Naman Sood <mail@nsood.in>	3 years ago
Brad Fitzpatrick	7461dded88	wgengine/monitor: on unsupported platforms, use a polling implementation ... Not great, but lets people working on new ports get going more quickly without having to do everything up front. As the link monitor is getting used more, I felt bad having a useless implementation. Updates #815 Updates #1427 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	8d77dfdacb	wgengine/router: add a dummy IPv6 address if needed for default routing. ... Fixes #1339 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	c3e5903b91	wgengine/magicsock: remove leftover portmapper debug logging ... It's already logged at the right time in logEndpointChange. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Naman Sood	95c03d1ead	wgengine/netstack: forward incoming connections to localhost ... Updates #707 Updates #504 Signed-off-by: Naman Sood <mail@nsood.in>	3 years ago
Brad Fitzpatrick	471f0c470a	wgengine/monitor: skip some macOS route updates, fix debounce regression ... Debound was broken way back in 5c1e443d34 and we never noticed. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f304a45481	wgengine/monitor: add skipped failing test for Darwin route message bug ... Updates #1416 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	31721759f3	wgengine/monitor: don't return nil, nil in darwin monitor ... We used to allow that, but now it just crashes. Separately I need to figure out why it got into this path at all, which is #1416. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Christine Dodrill	b89c757817	wgengine/tsdns: explicitly reject .onion lookups ... Tor has a location-hidden service feature that enables users to host services from inside the Tor network. Each of these gets a unique DNS name that ends with .onion. As it stands now, if a misbehaving application somehow manages to make a .onion DNS request to our DNS server, we will forward that to the DNS server, which could leak that to malicious third parties. See the recent bug Brave had with this[1] for more context. RFC 7686 suggests that name resolution APIs and libraries MUST respond with NXDOMAIN unless they can actually handle Tor lookups. We can't handle .onion lookups, so we reject them. [1]: https://twitter.com/albinowax/status/1362737949872431108 Fixes tailscale/corp#1351 Signed-off-by: Christine Dodrill <xe@tailscale.com>	3 years ago
Brad Fitzpatrick	24fa616e73	wgengine/monitor: make Darwin monitor shut down cleanly, add test ... Don't use os.NewFile or (*os.File).Close on the AF_ROUTE socket. It apparently does weird things to the fd and at least doesn't seem to close it. Just use the unix package. The test doesn't actually fail reliably before the fix, though. It was an attempt. But this fixes the integration tests. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	487c520109	wgengine: fix bug from earlier commit ... Commit e3df29d488 introduced this bug where the interfaces-were-changed-or-not bit got lost. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	793cb131f0	wgengine/router: toggle killswitch when using default routes on windows. ... Fixes #1398. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	e3df29d488	wgengine{,/monitor}: move interface state fetching/comparing to monitor ... Gets it out of wgengine so the Engine isn't responsible for being a callback registration hub for it. This also removes the Engine.LinkChange method, as it's no longer necessary. The monitor tells us about changes; it doesn't seem to need any help. (Currently it was only used by Swift, but as of 14dc790137 we just do the same from Go) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	a038e8690c	wgengine/netstack: fix 32-bit build broken from prior commit ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	38dc6fe758	cmd/tailscaled, wgengine: remove --fake, replace with netstack ... And add a --socks5-server flag. And fix a race in SOCKS5 replies where the response header was written concurrently with the copy from the backend. Co-authored with Naman Sood. Updates #707 Updates #504 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d74cddcc56	wgengine/netstack: add Magic DNS + DNS resolution to SOCKS5 dialing ... Updates #707 Updates #504 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	34188d93d4	wgengine/monitor: start moving interface state accessor into monitor ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	14dc790137	wgengine/monitor: make the darwin link monitor work in the sandbox too ... Previously tailscaled on macOS was running "/sbin/route monitor" as a child process, but child processes aren't allowed in the Network Extension / App Store sandbox. Instead, just do what "/sbin/route monitor" itself does: unix.Socket(unix.AF_ROUTE, unix.SOCK_RAW, 0) and read that. We also parse it now, but don't do anything with the parsed results yet. We will over time, as we have with Linux netlink messages over time. Currently any message is considered a signal to poll and see what changed. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago