Commit Graph

395 Commits (47ebd1e9a2bb48f0d33db1283101dab1d5053b4d)

Author SHA1 Message Date
Brad Fitzpatrick 01ee638cca Change some os.IsNotExist to errors.Is(err, os.ErrNotExist) for non-os errors.
os.IsNotExist doesn't unwrap errors. errors.Is does.

The ioutil.ReadFile ones happened to be fine but I changed them so
we're consistent with the rule: if the error comes from os, you can
use os.IsNotExist, but from any other package, use errors.Is.
(errors.Is always would also work, but not worth updating all the code)

The motivation here was that we were logging about failure to migrate
legacy relay node prefs file on startup, even though the code tried
to avoid that.

See golang/go#41122
4 years ago
Elias Naur eab6e9ea4e ipn: don't temporarilySetMachineKeyInPersist for Android clients
Without this change, newly installed Android clients crash on startup
with

panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0x9881b9f8]

goroutine 29 [running]:
tailscale.com/ipn.(*LocalBackend).initMachineKeyLocked.func1(0x50cb1b9c, 0x503c9a00)
	/home/elias/proj/tailscale/ipn/local.go:711 +0x2c
tailscale.com/ipn.(*LocalBackend).initMachineKeyLocked(0x503c9a00, 0x0, 0x0)
	/home/elias/proj/tailscale/ipn/local.go:736 +0x728
tailscale.com/ipn.(*LocalBackend).loadStateLocked(0x503c9a00, 0x988be40e, 0xb, 0x0, 0x0, 0x0, 0x0, 0x0)
	/home/elias/proj/tailscale/ipn/local.go:817 +0x1e8
tailscale.com/ipn.(*LocalBackend).Start(0x503c9a00, 0x0, 0x0, 0x988be40e, 0xb, 0x0, 0x0, 0x0, 0x0, 0x0, ...)
	/home/elias/proj/tailscale/ipn/local.go:412 +0x200
main.(*backend).Start(...)
	/home/elias/proj/tailscale-android/cmd/tailscale/backend.go:116
main.(*App).runBackend.func3(0x50106340, 0x5000c060, 0x50d9a280)
	/home/elias/proj/tailscale-android/cmd/tailscale/main.go:169 +0x90
created by main.(*App).runBackend
	/home/elias/proj/tailscale-android/cmd/tailscale/main.go:168 +0x27c

Signed-off-by: Elias Naur <mail@eliasnaur.com>
4 years ago
Brad Fitzpatrick 2b819ab38c ipn: don't log redundant peer stats so often
It was especially bad on our GUI platforms with a frontend that polls it.

No need to log it every few seconds if it's unchanged. Make it slightly
less allocate-y while I'm here.
4 years ago
Brad Fitzpatrick ff7ddd9d20 ipn/ipnserver: move Windows local disk logging up to the parent process
To capture panics, log.Printf writes to os.Stderr, etc.

Fixes #726
4 years ago
Brad Fitzpatrick c64718e9a0 ipn/ipnserver: work around os/user.LookupId failure on Windows
If we can't find the mapping from SID ("user ID") -> username, don't
treat that as a fatal. Apparently that happens in the wild for Reasons.
Ignore it for now. It's just a nice-to-have for error messages in the
rare multi-user case.

Updates #869

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
David Anderson 54e6c3a290 version: use OSS repo's version when building.
When building with redo, also include the git commit hash
from the proprietary repo, so that we have a precise commit
that identifies all build info (including Go toolchain version).

Add a top-level build script demonstrating to downstream distros
how to burn the right information into builds.

Adjust `tailscale version` to print commit hashes when available.

Fixes #841.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Brad Fitzpatrick d6ad41dcea ipn: send machine key to clients so they can downgrade to 1.0.x if needed
Fixes #732

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick e72f480d22 ipn: convert an int to a bool 4 years ago
Brad Fitzpatrick 999bc93a4d ipn: log active account on change
Updates tailscale/corp#461
4 years ago
Brad Fitzpatrick 66d196326f ipn: rename 'new' variable to 'newp'
Both to avoid shadowing new and because new is a little vague for such
a long method handling multiple new & old things.
4 years ago
Brad Fitzpatrick 6b1d2a5630 ipn: don't set DebugFlags to len 1 slice of empty string [""]
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
David Anderson 62d941dc26 tailcfg: add a DebugFlags field for experiments and debugging.
Also replaces the IPv6Overlay bool with use of DebugFlags, since
it's currently an experimental configuration.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Brad Fitzpatrick 7c8ca28c74 ipn: use cmd/cloner for Prefs.Clone
Also, make cmd/cloner's top-level "func Clone" generation opt-in.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick 1fd9958e9d ipn: wait for initial portpoll result before starting controlclient
We were creating the controlclient and starting the portpoll concurrently,
which frequently resulted in the first controlclient connection being canceled
by the firsdt portpoll result ~milliseconds later, resulting in another
HTTP request.

Instead, wait a bit for the first portpoll result so it's much less likely to
interrupt our controlclient connection.

Updates tailscale/corp#557
4 years ago
Brad Fitzpatrick 515866d7c6 ipn, ipnserver, cmd/tailscale: add "server mode" support on Windows
This partially (but not yet fully) migrates Windows to tailscaled's
StateStore storage system.

This adds a new bool Pref, ForceDaemon, defined as:

// ForceDaemon specifies whether a platform that normally
// operates in "client mode" (that is, requires an active user
// logged in with the GUI app running) should keep running after the
// GUI ends and/or the user logs out.
//
// The only current applicable platform is Windows. This
// forced Windows to go into "server mode" where Tailscale is
// running even with no users logged in. This might also be
// used for macOS in the future. This setting has no effect
// for Linux/etc, which always operate in daemon mode.

Then, when ForceDaemon becomes true, we now write use the StateStore
to track which user started it in server mode, and store their prefs
under that key.

The ipnserver validates the connections/identities and informs that
LocalBackend which userid is currently in charge.

The GUI can then enable/disable server mode at runtime, without using
the CLI.

But the "tailscale up" CLI was also fixed, so Windows users can use
authkeys or ACL tags, etc.

Updates #275
4 years ago
Brad Fitzpatrick 638127530b ipn/ipnserver: prevent use by multiple Windows users, add HTML status page
It was previously possible for two different Windows users to connect
to the IPN server at once, but it didn't really work. They mostly
stepped on each other's toes and caused chaos.

Now only one can control it, but it can be active for everybody else.

Necessary dependency step for Windows server/headless mode (#275)

While here, finish wiring up the HTTP status page on Windows, now that
all the dependent pieces are available.
4 years ago
Brad Fitzpatrick 6ee219a25d ipn, wgengine, magicsock, tsdns: be quieter and less aggressive when offline
If no interfaces are up, calm down and stop spamming so much. It was
noticed as especially bad on Windows, but probably was bad
everywhere. I just have the best network conditions testing on a
Windows VM.

Updates #604
4 years ago
Brad Fitzpatrick 587bdc4280 ipn, wgengine: disable subnet routes if network has PAC configuration
Not configurable yet.

Updates tailscale/corp#653

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Josh Bleecher Snyder 585a0d8997 all: use testing.T.TempDir
Bit of Friday cleanup.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
4 years ago
Brad Fitzpatrick 12e28aa87d ipn: on transition from no PAC to PAC, reset state
So previous routes aren't shadowing resources that the operating
system might need (Windows Domain Controller, DNS server, corp HTTP
proxy, WinHTTP fetching the PAC file itself, etc).

This effectively detects when we're transitioning from, say, public
wifi to corp wifi and makes Tailscale remove all its routes and stops
its TCP connections and tries connecting to everything anew.

Updates tailscale/corp#653
4 years ago
Brad Fitzpatrick b5a3850d29 control/controlclient, ipn: store machine key separately from user prefs/persist
Updates #610 (fixes after some win/xcode changes in a separate repo)
4 years ago
Brad Fitzpatrick c8f257df00 Revert "all: keep UserProfiles a slice instead of a map for longer"
This reverts commit e5894aba42.

Breaks macOS/iOS build. Reverting per chat with Josh; he'll fix later today.
4 years ago
Brad Fitzpatrick 90b7293b3b ipn: add/move some constants, update a comment
And make the StateStore implementations be Stringers, for error messages.
4 years ago
Josh Bleecher Snyder e5894aba42 all: keep UserProfiles a slice instead of a map for longer
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
4 years ago
Brad Fitzpatrick 3bdcfa7193 ipn: remove DisableDERP pref
We depend on DERP for NAT traversal now[0] so disabling it entirely can't
work.

What we'll do instead in the future is let people specify
alternate/additional DERP servers. And perhaps in the future we could
also add a pref for nodes to say when they expect to never need/want
to use DERP for data (but allow it for NAT traversal communication).

But this isn't the right pref and it doesn't work, so delete it.

Fixes #318

[0] https://tailscale.com/blog/how-nat-traversal-works/
4 years ago
Brad Fitzpatrick c41947903a ipn: don't log if legacy prefs don't exist (the normal case these days) 4 years ago
Brad Fitzpatrick 96fd20e3c0 ipn: bail out a bit earlier when a peer doesn't have a DNS name
It's properly handled later in tsdns.NewMap anyway, but there's work
done in the meantime that can be skipped when a peer lacks a DNS name.
It's also more clear that it's okay for it to be blank.
4 years ago
David Anderson 8f5b52e571 net/netns: add windows support.
Also remove rebinding logic from the windows router. Magicsock will
instead rebind based on link change signals.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Brad Fitzpatrick 4f71319f7c ipn/ipnserver: make ipnserver also be an HTTP server for localhost clients
For now it just says hello to show auth works. More later.
4 years ago
Brad Fitzpatrick 3af64765fd ipn: fix Windows crash from improperly strict assertion 4 years ago
Brad Fitzpatrick 8ecee476f6 ipn: simplify TestLocalLogLines, defer a Shutdown of its LocalBackend
The test's LocalBackend was not shut down (Shutdown both releases
resources and waits for its various goroutines to end). This should
fix the test race we were seeing. It definitely fixes the file
descriptor leak that preventing -race -count=500 from passing before.
4 years ago
Brad Fitzpatrick 68c42530e9 tstest: rename LogListener to LogLineTracker
But mostly to rename tstest.ListenFor which has no mention of log lines in it.
It sounded like a net.Listener or something.
4 years ago
Brad Fitzpatrick 9b07517f18 wgengine: add Engine.SetLinkChangeCallback
Start of making the IPN state machine react to link changes and down
its DNS & routes if necessary to unblock proxy resolution (e.g. for
transitioning from public to corp networks where the corp network has
mandatory proxies and WPAD PAC files that can't be resolved while
using the DNS/routes configured previously)

This change should be a no-op. Just some callback plumbing.
4 years ago
Brad Fitzpatrick 5acbb149a2 ipn/ipnstate: include DNSName in tailscale status --json output 4 years ago
Brad Fitzpatrick 483141094c cmd/tailscale/cli: add basic 'down' subcommand
RELNOTE=yes
4 years ago
halulu f27a57911b
cmd/tailscale: add derp and endpoints status (#703)
cmd/tailscale: add local node's information to status output (by default)

RELNOTE=yes

Updates #477

Signed-off-by: Halulu <lzjluzijie@gmail.com>
4 years ago
Wendi Yu a3fb422a39
ipn: tag and test for grinder log lines (#711)
Signed-off-by: Wendi <wendi.yu@yahoo.ca>
4 years ago
Dmytro Shynkevych a903d6c2ed
tailcfg, tsdns: derive root domains from list of nodes (#708)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
4 years ago
Brad Fitzpatrick 84dc891843 cmd/tailscale/cli: add ping subcommand
For example:

$ tailscale ping -h
USAGE
  ping <hostname-or-IP>

FLAGS
  -c 10                   max number of pings to send
  -stop-once-direct true  stop once a direct path is established
  -verbose false          verbose output

$ tailscale ping mon.ts.tailscale.com
pong from monitoring (100.88.178.64) via DERP(sfo) in 65ms
pong from monitoring (100.88.178.64) via DERP(sfo) in 252ms
pong from monitoring (100.88.178.64) via [2604:a880:2:d1::36:d001]:41641 in 33ms

Fixes #661

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick a275b9d7aa control/controlclient: use less battery when stopped, stop map requests
Updates #604

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick dd97111d06 backoff: update to Go style, document a bit, make 30s explicit
Also, bit of behavior change: on non-nil err but expired context,
don't reset the consecutive failure count. I don't think the old
behavior was intentional.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick b62b07bc2d ipn: jack up the MaxMessageSize from 1MB to 10MB
hello.ipn.dev has a 2.5MB network map
4 years ago
Dmytro Shynkevych 934c63115e
ipn: put Magic DNS domains first
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
4 years ago
David Anderson d64de1ddf7 Revert "cmd/tailscaled: exit gracefully on SIGPIPE"
tailscaled receives a SIGPIPE when CLIs disconnect from it. We shouldn't
shut down in that case.

This reverts commit 43b271cb26.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 358cd3fd92 ipn: fix incorrect change tracking for packet filter.
ORder of operations to trigger a problem:
 - Start an already authed tailscaled, verify you can ping stuff.
 - Run `tailscale up`. Notice you can no longer ping stuff.

The problem is that `tailscale up` stops the IPN state machine before
restarting it, which zeros out the packet filter but _not_ the packet
filter hash. Then, upon restarting IPN, the uncleared hash incorrectly
makes the code conclude that the filter doesn't need updating, and so
we stay with a zero filter (reject everything) for ever.

The fix is simply to update the filterHash correctly in all cases,
so that running -> stopped -> running correctly changes the filter
at every transition.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Dmytro Shynkevych 28e52a0492
all: dns refactor, add Proxied and PerDomain flags from control (#615)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
4 years ago
Avery Pennarun 60c00605d3 ipn/setClientStatus: fix inverted prefsChanged check.
We need to emit Prefs when it *has* changed, not when it hasn't.

Test is added in our e2e test, separately.

Fixes: #620

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
4 years ago
Brad Fitzpatrick cbf71d5eba ipn/ipnserver: fix bug in earlier commit where conn can be stranded
If a connection causes getEngine to transition from broken to fixed,
that connection was getting lost.
4 years ago
Brad Fitzpatrick 9ff5b380cb ipn/ipnserver: staticcheck is not wrong
shamecube.gif
4 years ago
Brad Fitzpatrick 4aba86cc03 ipn/ipnserver: make Engine argument a func that tries again for each connection
So a backend in server-an-error state (as used by Windows) can try to
create a new Engine again each time somebody re-connects, relaunching
the GUI app.

(The proper fix is actually fixing Windows issues, but this makes things better
in the short term)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Dmytro Shynkevych c7582dc234
ipn: fix netmap change tracking and dns map generation (#609)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
4 years ago
David Anderson 0249236cc0 ipn/ipnstate: record assigned Tailscale IPs.
wgengine/magicsock: use ipnstate to find assigned Tailscale IPs.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Elias Naur 0a42b0a726 ipn: add OSVersion, DeviceModel fields to Prefs and propagate to Hostinfos
Needed for Android.

Signed-off-by: Elias Naur <mail@eliasnaur.com>
4 years ago
Brad Fitzpatrick 3b0514ef6d control/controlclient: rename uflags, give it a type, remove dead code 4 years ago
Dmytro Shynkevych 218de6d530
ipn: load hostname in Start.
This prevents hostname being forced to os.Hostname despite override
when control is contacted for the first time after starting tailscaled.

Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
4 years ago
Brad Fitzpatrick de11f90d9d ipn: remove unused parameter to func LoadPrefs, fix godoc subject 4 years ago
Brad Fitzpatrick 1f923124bf ipn/ipnserver: support simultaneous connections
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick 7ba148e54e cmd/tailscale: make tailscale status -active also filter in -json mode 4 years ago
Dmytro Shynkevych d9ac2ada45
ipn: add self to dns map
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
4 years ago
Dmytro Shynkevych 30bbbe9467
wgengine/router: dns: unify on *BSD, multimode on Linux, Magic DNS (#536)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
4 years ago
Elias Naur 6e8f0860af ipn: add Login backend command for sign-in with token
The StartLoginInteractive command is for delegating the sign-in flow
to a browser. The Android Gooogle Sign-In SDK inverts the flow by
giving the client ID tokens.

Add a new backend command for accepting such tokens by exposing the existing
controlclient.Client.Login support for OAuth2 tokens. Introduce a custom
TokenType to distinguish ID tokens from other OAuth2 tokens.

Signed-off-by: Elias Naur <mail@eliasnaur.com>
4 years ago
Dmytro Shynkevych 61abab999e
cmd/tailscaled: graceful shutdown (#534)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
4 years ago
Brad Fitzpatrick 96d806789f ipn: add Notify.LocalTCPPort field for macOS Network Extension to use
We want the macOS Network Extension to share fate with the UI frontend,
so we need the backend to know when the frontend disappears.

One easy way to do that is to reuse the existing TCP server it's
already running (for tailscale status clietns).

We now tell the frontend our ephemeral TCP port number, and then have
the UI connect to it, so the backend can know when it disappears.

There are likely Swift ways of doing this, but I couldn't find them
quickly enough, so I reached for the hammer I knew.
4 years ago
Brad Fitzpatrick a8b95571fb ipn, control/controlclient: fix some data races
More remain.

Fixes tailscale/corp#432
4 years ago
Brad Fitzpatrick 3984f9be2f ipn, ipn/ipnserver: add support for serving in error-message-only mode
So Windows service failures can be propagated to the Windows UI client.
4 years ago
Dmytro Shynkevych 67ebba90e1
tsdns: dual resolution mode, IPv6 support (#526)
This change adds to tsdns the ability to delegate lookups to upstream nameservers.
This is crucial for setting Magic DNS as the system resolver.

Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
4 years ago
Brad Fitzpatrick 6196b7e658 wgengine/magicsock: change API to not permit disco key changes
Generate the disco key ourselves and give out the public half instead.

Fixes #525
4 years ago
Brad Fitzpatrick 630379a1d0 cmd/tailscale: add tailscale status region name, last write, consistently star
There's a lot of confusion around what tailscale status shows, so make it better:
show region names, last write time, and put stars around DERP too if active.

Now stars are always present if activity, and always somewhere.
4 years ago
David Anderson 9cd4e65191 smallzstd: new package that constructs zstd small encoders/decoders.
It's just a config wrapper that passes "use less memory at the
expense of compression" parameters by default, so that we don't
accidentally construct resource-hungry (de)compressors.

Also includes a benchmark that measures the memory cost of the
small variants vs. the stock variants. The savings are significant
on both compressors (~8x less memory) and decompressors (~1.4x less,
not including the savings from the significantly smaller
window on the compression side - with those savings included it's
more like ~140x smaller).

BenchmarkSmallEncoder-8            	   56174	     19354 ns/op	      31 B/op	       0 allocs/op
BenchmarkSmallEncoderWithBuild-8   	    2900	    382940 ns/op	 1746547 B/op	      36 allocs/op
BenchmarkStockEncoder-8            	   48921	     25761 ns/op	     286 B/op	       0 allocs/op
BenchmarkStockEncoderWithBuild-8   	     426	   2630241 ns/op	13843842 B/op	     124 allocs/op
BenchmarkSmallDecoder-8            	  123814	      9344 ns/op	       0 B/op	       0 allocs/op
BenchmarkSmallDecoderWithBuild-8   	   41547	     27455 ns/op	   27694 B/op	      31 allocs/op
BenchmarkStockDecoder-8            	  129832	      9417 ns/op	       1 B/op	       0 allocs/op
BenchmarkStockDecoderWithBuild-8   	   25561	     51751 ns/op	   39607 B/op	      92 allocs/op

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Brad Fitzpatrick a975e86bb8 wgengine/magicsock: add new endpoint type used for discovery-supporting peers
This adds a new magicsock endpoint type only used when both sides
support discovery (that is, are advertising a discovery
key). Otherwise the old code is used.

So far the new code only communicates over DERP as proof that the new
code paths are wired up. None of the actually discovery messaging is
implemented yet.

Support for discovery (generating and advertising a key) are still
behind an environment variable for now.

Updates #483
4 years ago
Brad Fitzpatrick fe50cd0c48 ipn, wgengine: plumb NetworkMap down to magicsock
Now we can have magicsock make decisions based on tailcfg.Debug
settings sent by the server.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick 5bc29e7388 ipn: add missing locking in LocalBackend.NetMap
Looks like it's only used by tests.
4 years ago
Brad Fitzpatrick 666d404066 ipn: put discovery key generation behind an environment flag for now
Later we'll want to use the presence of a discovery key as a signal
that the node knows how to participate in discovery. Currently the
code generates keys and sends them to the control server but doesn't
do anything with them, which is a bad state to stay in lest we release
this code and end up with nodes in the future that look like they're
functional with the new discovery protocol but aren't.

So for now, make this opt-in as a debug option for now, until the rest
of it is in.

Updates #483
4 years ago
Dmytro Shynkevych 00ca17edf4 ipn: fix race in enterState
Signed-Off-By: Dmytro Shynkevych <dmytro@tailscale.com>
4 years ago
Brad Fitzpatrick 53fb25fc2f all: generate discovery key, plumb it around
Not actually used yet.

Updates #483
4 years ago
David Anderson 0ecaf7b5ed control/controlclient: make netmap generation use rate-limited logger. 4 years ago
Dmytro Shynkevych c12d87c54b
Fix concurrency issues in controlclient, ipn, types/logger (#456)
Signed-Off-By: Dmytro Shynkevych <dmytro@tailscale.com>
4 years ago
Dmytro Shynkevych 07e02ec9d3
wgengine/tsdns: add test and prevent useless updates (#449)
Signed-Off-By: Dmytro Shynkevych <dmytro@tailscale.com>
4 years ago
Dmytro Shynkevych 511840b1f6
tsdns: initial implementation of a Tailscale DNS resolver (#396)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
4 years ago
David Anderson c71754eba2 ipn/ipnserver: revert decoder memory limit.
The zstd library treats that limit as a hard cap on decompressed
size, in the mode we're using it, rather than a window size.

Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Elias Naur 364a8508b2 ipn: add Hostname override to Prefs
Overriding the hostname is required for Android, where os.Hostname
is often just "localhost".

Updates #409

Signed-off-by: Elias Naur <mail@eliasnaur.com>
5 years ago
Avery Pennarun f0b6ba78e8 wgengine: don't pass nil router.Config objects.
These are hard for swift to decode in the iOS app.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Brad Fitzpatrick 004780b312 ipn: restore LiveDERPs assignment in LocalBackend.parseWgStatus
Updates #421 (likely fixes it; need to do an iOS build to be sure)
5 years ago
Avery Pennarun 34c30eaea0 router_linux: use only baseline 'ip rule' features that exist in old kernels.
This removes the use of suppress_ifgroup and fwmark "x/y" notation,
which are, among other things, not available in busybox and centos6.

We also use the return codes from the 'ip' program instead of trying to
parse its output.

I also had to remove the previous hack that routed all of 100.64.0.0/10
by default, because that would add the /10 route into the 'main' route
table instead of the new table 88, which is no good. It was a terrible
hack anyway; if we wanted to capture that route, we should have
captured it explicitly as a subnet route, not as part of the addr. Note
however that this change affects all platforms, so hopefully there
won't be any surprises elsewhere.

Fixes #405
Updates #320, #144

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
David Anderson 2b74236567 ipn: move e2e_test back to corp repo.
It depends on corp things, so can't run here anyway.

Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Brad Fitzpatrick e6b84f2159 all: make client use server-provided DERP map, add DERP region support
Instead of hard-coding the DERP map (except for cmd/tailscale netcheck
for now), get it from the control server at runtime.

And make the DERP map support multiple nodes per region with clients
picking the first one that's available. (The server will balance the
order presented to clients for load balancing)

This deletes the stunner package, merging it into the netcheck package
instead, to minimize all the config hooks that would've been
required.

Also fix some test flakes & races.

Fixes #387 (Don't hard-code the DERP map)
Updates #388 (Add DERP region support)
Fixes #399 (wgengine: flaky tests)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
David Anderson e8b3a5e7a1 wgengine/filter: implement a destination IP pre-filter.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Avery Pennarun 3ed2124356 ipn: Resolve some resource leaks in test.
Updates tailscale/corp#255.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun ea8f92b312 ipn/local: get rid of some straggling calls to the log module.
Use b.logf() instead.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun db051fb013 ipnserver and logpolicy: configure zstd with low-memory settings.
The compressed blobs we send back and forth are small and infrequent,
which doesn't justify the 8MB * GOMAXPROCS memory that was being
allocated. This was the overwhelming majority of memory use in
tailscaled. On my system it goes from ~100M RSS to ~15M RSS (which is
still suspiciously high, but we can worry about that more later).

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
David Anderson c97c45f268 ipn: sprinkle documentation and clarity rewrites through LocalBackend.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Wendi Yu bb55694c95
wgengine: log node IDs when peers are added/removed (#381)
Also stop logging data sent/received from nodes we're not connected to (ie all those `x`s being logged in the `peers: ` line)
Signed-off-by: Wendi <wendi.yu@yahoo.ca>
5 years ago
David Anderson 0fe262f093 ipn: plumb NetfilterMode all the way out to the CLI.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
David Anderson 292606a975 wgengine/router: support multiple levels of netfilter involvement.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Avery Pennarun 08acb502e5 Add tstest.PanicOnLog(), and fix various problems detected by this.
If a test calls log.Printf, 'go test' horrifyingly rearranges the
output to no longer be in chronological order, which makes debugging
virtually impossible. Let's stop that from happening by making
log.Printf panic if called from any module, no matter how deep, during
tests.

This required us to change the default error handler in at least one
http.Server, as well as plumbing a bunch of logf functions around,
especially in magicsock and wgengine, but also in logtail and backoff.

To add insult to injury, 'go test' also rearranges the output when a
parent test has multiple sub-tests (all the sub-test's t.Logf is always
printed after all the parent tests t.Logf), so we need to screw around
with a special Logf that can point at the "current" t (current_t.Logf)
in some places. Probably our entire way of using subtests is wrong,
since 'go test' would probably like to run them all in parallel if you
called t.Parallel(), but it definitely can't because the're all
manipulating the shared state created by the parent test. They should
probably all be separate toplevel tests instead, with common
setup/teardown logic. But that's a job for another time.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun 89a6f27cf8 Merge remote-tracking branch 'origin/master' into base
* origin/master:
  types/logger: add ArgWriter
  wgengine: wrap tun.Device to support filtering and packet injection (#358)
5 years ago
Avery Pennarun a7edf11a40 {ipn,control/controlclient}/tests: pass a logf function to control.New().
This matches the new API requirements.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Dmytro Shynkevych 33b2f30cea
wgengine: wrap tun.Device to support filtering and packet injection (#358)
Right now, filtering and packet injection in wgengine depend
on a patch to wireguard-go that probably isn't suitable for upstreaming.

This need not be the case: wireguard-go/tun.Device is an interface.
For example, faketun.go implements it to mock a TUN device for testing.

This patch implements the same interface to provide filtering
and packet injection at the tunnel device level,
at which point the wireguard-go patch should no longer be necessary.

This patch has the following performance impact on i7-7500U @ 2.70GHz,
tested in the following namespace configuration:
┌────────────────┐    ┌─────────────────────────────────┐     ┌────────────────┐
│      $ns1      │    │               $ns0              │     │      $ns2      │
│    client0     │    │      tailcontrol, logcatcher    │     │     client1    │
│  ┌─────┐       │    │  ┌──────┐         ┌──────┐      │     │  ┌─────┐       │
│  │vethc│───────┼────┼──│vethrc│         │vethrs│──────┼─────┼──│veths│       │
│  ├─────┴─────┐ │    │  ├──────┴────┐    ├──────┴────┐ │     │  ├─────┴─────┐ │
│  │10.0.0.2/24│ │    │  │10.0.0.1/24│    │10.0.1.1/24│ │     │  │10.0.1.2/24│ │
│  └───────────┘ │    │  └───────────┘    └───────────┘ │     │  └───────────┘ │
└────────────────┘    └─────────────────────────────────┘     └────────────────┘
Before:
---------------------------------------------------
| TCP send               | UDP send               |
|------------------------|------------------------|
| 557.0 (±8.5) Mbits/sec | 3.03 (±0.02) Gbits/sec |
---------------------------------------------------
After:
---------------------------------------------------
| TCP send               | UDP send               |
|------------------------|------------------------|
| 544.8 (±1.6) Mbits/sec | 3.13 (±0.02) Gbits/sec |
---------------------------------------------------
The impact on receive performance is similar.

Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
5 years ago
David Anderson 9ccbcda612 wgengine/router: rename config.Settings to config.Config, make pointer.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
David Anderson 72cae5504c wgengine: generate and plumb router.Settings in from ipn.
This saves a layer of translation, and saves us having to
pass in extra bits and pieces of the netmap and prefs to
wgengine. Now it gets one Wireguard config, and one OS
network stack config.

Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Wendi Yu 3663797815 Reduce logspam from node with no peers
Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>
5 years ago
David Anderson bfdc8175b1 wgengine/router: add a setting to disable SNAT for subnet routes.
Part of #320.

Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Brad Fitzpatrick 8a3e77fc43 ipn, wgengine/filter: remove exported type aliases 5 years ago
Brad Fitzpatrick 529e2cb31a ipn: add AllowVersionSkew bool to Notify & Message
For "tailscale status" on macOS (from separately downloaded
cmd/tailscale binary against App Store IPNExtension).

(This isn't all of it, but I've had this sitting around uncommitted.)
5 years ago
Sylvain Rabot 74d6ab995d ipn/ipnstate: improve HTML output
Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
5 years ago
Wendi Yu 0c69b4e00d
Implement rate limiting on log messages (#356)
Implement rate limiting on log messages

Addresses issue #317, where logs can get spammed with the same message
nonstop. Created a rate limiting closure on logging functions, which
limits the number of messages being logged per second based on format
string. To keep memory usage as constant as possible, the previous cache
purging at periodic time intervals has been replaced by an LRU that
discards the oldest string when the capacity of the cache is reached.


Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>
5 years ago
David Anderson 89af51b84d wgengine: plumb locally advertised subnet routes.
With this change, advertising subnet routes configures the
firewall correctly.

Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Avery Pennarun 108237798d controlclient and ipn tests: supply --advertise-tags and --advertise-routes.
This helps validate the server's behaviour when these are present.
5 years ago
Brad Fitzpatrick fefd7e10dc types/structs: add structs.Incomparable annotation, use it where applicable
Shotizam before and output queries:

sqlite> select sum(size) from bin where func like 'type..%';
129067
=>
120216
5 years ago
Avery Pennarun 9d1f48032a cmd/tailscale: add --advertise-tags option.
These will be used for dynamically changing the identity of a node, so
its ACL rights can be different from your own.

Note: Not all implemented yet on the server side, but we need this so
we can request the tagged rights in the first place.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
David Crawshaw 5650f1ecf9 controlclient, ipn: adjust tests for tailscale.com keepalive change 5 years ago
David Crawshaw c10f90357e ipn/e2e_test: fix flaky logout state drain 5 years ago
David Anderson 1ac570def7 wgengine/router: split out from wgengine.
The router implementations are logically separate, with their own API.

Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Avery Pennarun d6c34368e8 ipn/local: differentiate Shields Up from Uninitialized in logs.
We were printing "Shields Up" when the netmap wasn't initialized yet,
which while technically effectively true, turned out to be confusing
when trying to debug things.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun ced9b4008a ipn: clear the hostinfo.Services list when prefs.ShieldsUp==true.
When shields are up, no services are available to connect to, so hide
them all. This will also help them disappear from the UI menu on
other nodes.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun d7429b9a8d Add prefs.ShieldsUp and --shields-up option.
This sets a default packet filter that blocks all incoming requests,
giving end users more control over who can get into their machine, even
if the admin hasn't set any central ACLs.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun dbc1f71e5d ipn/message: fix some message encoding problems.
- Reset() was not including a Version field, so was getting rejected;
  the Logout operation no longer happened when the client got disconnected.

- Don't crash if we can't decode 0-byte messages, which I suspect might
  sometimes come through on EOF.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
David Anderson 0038223632 tstest: rename from testy.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Brad Fitzpatrick e1526b796e ipn: don't listen on the unspecified address in test
To avoid the Mac firewall dialog of (test) death.

See 4521a59f30
which I added to help debug this.
5 years ago
David Crawshaw d2b7cb1e45 ipn, controlclient: add control.New parameter
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
Brad Fitzpatrick f4c7eb8c44 ipn: revert part of 18017f7630
In retrospect I don't trust it and I'm afraid might've caused some Mac flakiness.
I'd like more tests here before I work on this.

Updates #288
5 years ago
Brad Fitzpatrick 18017f7630 ipn, wgengine/magicsock: be more idle when in Stopped state with no peers
(Previously as #288, but with some more.)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick 45f2b53aca all: remove unnecessary trailing newlines in format patterns for consistency
And document on logger.Logf that it's unnecessary.
5 years ago
Brad Fitzpatrick 3a3b64301e wgengine: quiet some engine reconfig logging, make more consistent
Updates #282

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick b24029717b ipn: outdent some code in if that's statically always true 5 years ago
David Crawshaw 1747d099e9 ipn: add auth key
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
Brad Fitzpatrick 8ca796d144 ipn, ipn/policy: filter portlist to a short list of "interesting" ports
Adds new package ipn/policy to be shared between node client & control server.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
David Crawshaw 0590ad68be controlclient, ipn: adjust tests for authURL semantic changes
The tests cheat at filling out web forms by directly POSTing to
the target. The target for authURLs has changed slightly, the base
authURL now redirects the user to the login page.

Additionally, the authURL cycle now checks the cookie is set
correctly, so we add cookie jars where necessary to pass the
cookie through.
5 years ago
Brad Fitzpatrick a4ef345737 cmd/tailscale: add status subcommand
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick f51f18b42b ipn: move FakeBackend to a test-only file 5 years ago
Brad Fitzpatrick 322499473e cmd/tailscaled, wgengine, ipn: add /debug/ipn handler with world state
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Avery Pennarun f53e78e0d5 wgengine: don't lose filter state on filter reconfig.
We were abandoning the UDP port LRU every time we got a new packet
filter from tailcontrol, which caused return packets to suddenly stop
arriving.
5 years ago
Avery Pennarun 4336de0d98 ipn/local: don't print packet filter every single time.
It's extremely noisy right now for domains with complex ACLs.
5 years ago
Brad Fitzpatrick 7740cbd8d9 ipn: call SetNetInfoCallback later, in Start
It was being called back into ultimately from magicsock before there
was a control client.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick 51b669e4bd ipn: skip tailscaled UDP ports in service list 5 years ago
David Crawshaw addbdce296 wgengine, ipn: include number of active DERPs in status
Use this when making the ipn state transition from Starting to
Running. This way a network of quiet nodes with no active
handshaking will still transition to Active.

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
David Crawshaw 5a0822eefd controlclient, ipn: fix tests for new control param 5 years ago
Brad Fitzpatrick e085aec8ef all: update to wireguard-go API changes
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick 120273d7f6 portlist: document, clean up, fix an open fd spike, optimize a bit
I noticed portlist when looking at some profiles and hadn't looked at
the code much before. This is a first pass over it. It allocates a
fair bit. More love remains, but this does a bit:

name       old time/op    new time/op    delta
GetList-8    9.92ms ± 8%    9.64ms ±12%     ~     (p=0.247 n=10+10)

name       old alloc/op   new alloc/op   delta
GetList-8     931kB ± 0%     869kB ± 0%   -6.70%  (p=0.000 n=10+10)

name       old allocs/op  new allocs/op  delta
GetList-8     4.59k ± 0%     3.69k ± 1%  -19.71%  (p=0.000 n=10+10)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick 42e98d4edc Quiet two little log annoyances. 5 years ago
Avery Pennarun b23cb11eaf ipn: Prefs.String(): print the current derp setting. 5 years ago
David Anderson aeb88864e0 ipn: don't clobber netinfo in Start(). 5 years ago
Avery Pennarun b4897e7de8 controlclient/netmap: write our own b.ConciseDiffFrom(a) function.
This removes the need for go-cmp, which is extremely bloaty so we had
to leave it out of iOS. As a result, we had also left it out of macOS,
and so we didn't print netmap diffs at all on darwin-based platforms.
Oops.

As a bonus, the output format of the new function is way better.

Minor oddity: because I used the dumbest possible diff algorithm, the
sort order is a bit dumb. We print all "removed" lines and then print
all "added" lines, rather than doing the usual diff-like thing of
interspersing them. This probably doesn't matter (maybe it's an
improvement).
5 years ago
David Crawshaw 57f220656c ipn: search for ErrStateNotExist with errors.Is
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
Brad Fitzpatrick 39c0ae1dba derp/derpmap: new DERP config package, merge netcheck into magicsock more
Fixes #153
Updates #162
Updates #163

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
David Crawshaw 5f2a17482b ipn: when enforcing defaults, set UsePacketFilter=true
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
David Crawshaw f5e0407e97 ipn: exercise logout in e2e test
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
David Crawshaw 1dee36a984 ipn: put e2e login section in its own subtest
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
David Crawshaw 66505358c0 ipn: move e2e test skipping into subtests
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
David Crawshaw 5562fae9f0 ipn: use NewPrefs in e2e_test
We weren't setting UsePacketFilter, so the synthetic ping packets
used to establish a connection were never being sent.

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
Brad Fitzpatrick eac62ec5ff ipn, wgengine/magicsock: add ipn.Prefs.DisableDERP bool
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick b27d4c017a magicsock, wgengine, ipn, controlclient: plumb regular netchecks to map poll
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick 4cf5ac3060 ipn/ipnserver: remove unnecessary closure parameter 5 years ago
Brad Fitzpatrick 68ff31a0ba ipn: have NewFileStore try to create directories as needed 5 years ago
Brad Fitzpatrick 06092a3af3 ipn/ipnserver: document potential race, start on test for it 5 years ago
Brad Fitzpatrick ef1f967ec0 ipn: remove an unnecessary named parameter in doc 5 years ago
Brad Fitzpatrick 657f9593ae Reduce some logspam. 5 years ago
David Crawshaw d133339216 ipn: always guard LocalBackend.prefs with mu
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
Brad Fitzpatrick bcf3719b9e netcheck: add hairpinning detection
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
David Crawshaw cdc10b74f1 ipn: always guard LocalBackend.endpoints with mu
For #112

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
David Crawshaw 3425d8d84f ipn: always guard LocalBackend.engineStatus with mu
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
David Crawshaw e7cdc11654 ipn: always guard LocalBackend.netMapCache with mu
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
Brad Fitzpatrick 25797c8c2a all: rename deep "Copy" methods to conventional Go name "Clone" 5 years ago
Brad Fitzpatrick 14559340ee Start of netcheck package & including network state in Hostinfo.
* adds new packet "netcheck" to do the checking of UDP, IPv6, and
  nearest DERP server, and the Report type for all that (and more
  in the future, probably pulling in danderson's natprobe)
* new tailcfg.NetInfo type
* cmd/tailscale netcheck subcommand (tentative name, likely to
  change/move) to print out the netcheck.Report.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick eefafad9f8 ipn: fix some mutex/ownership issues
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick 3988ddc85d types/logger: add WithPrefix, use it in two places
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick 758744a4e3 Fix some Hostinfo value usages from the previous commit. 5 years ago
Brad Fitzpatrick d8de11a01b control: make Hostinfo accessed by pointer
Fix potential races in copying aliased slices by value.

Also few little doc updates.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick 367ffde21a ipn: misc cleanup
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
David Anderson c47f907a27 ipn: use *Prefs rather than Prefs throughout.
Prefs has become a heavy object with non-memcpy copy
semantics. We should not pass such a thing by value.

Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
David Anderson 0c55777fed ipn: temporary support for loading legacy relaynode configs.
Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
David Anderson cf1e386cbd ipn: move Options.ServerURL into Prefs.
We can't rely on a frontend to provide a control
server URL, so this naturally belongs in server-persisted
state.

Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
David Anderson 4460bd638b safesocket: simplify API.
On unix, we want to provide a full path to the desired unix socket.

On windows, currently we want to provide a TCP port, but someday
we'll also provide a "path-ish" object for a named pipe.

For now, simplify the API down to exactly a path and a TCP port.

Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
David Anderson 47da432991 ipn: handle advertised routes provided by frontend.
Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
David Anderson e0c35723a8 ipn: add documentation to the Prefs struct.
Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
David Anderson 59ba2e6316 ipn: implement Prefs.Equals efficiently.
Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
David Anderson a5b84fa921 ipn: add AdvertiseRoutes to Prefs.
This is a prelude to supporting relaynode's --routes in
tailscaled. The daemon needs to remembers routes to
advertise, and the CLI needs to be able to change the
set of advertised routes. Prefs is the thing used for
both of these.

Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
David Anderson a70a91521b ipn: print the packet filter setting in prefs.
Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
David Anderson 62fb652eef cmd/tailscaled: run off internal state autonomously.
With this change, tailscaled can be restarted and reconnect
without interaction from `tailscale`, and `tailscale` is merely
there to provide login assistance and adjust preferences.

Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
Brad Fitzpatrick 80d5d4bdfe ipn: fix test breakage from earlier 79295b1138
This test is skipped in tailscale/tailscale because it depends on
parts that haven't been released yet and was thus overlooked in the
git commit 79295b1138 cleanup.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick 2896be60db Move "logger" package to under types, now that we have it.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
David Anderson dec5d64593 ipn/ipnserver: remove Options.AllowQuit.
It was previously used by the MacOS client, but it now does
something different. ipnserver should never obey a client's
request to exit.

Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
Brad Fitzpatrick 747c7d7ce2 types/empty: add Message, stop using mysterious *struct{}
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
David Anderson 5f45b7c765 ipn: make LocalBackend.loadStateWithLock easier to follow.
Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
David Anderson 96fd8b4230 ipn: adjust backend docs a bit more.
Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
David Anderson 73c0a2bee2 Improve documentation in backend.go.
Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
David Anderson f51293a2c7 Lint fixes.
Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
David Anderson 5bc632271b Introduce a state store to LocalBackend.
The store is passed-in by callers of NewLocalBackend and
ipnserver.Run, but currently all callers are hardcoded to
an in-memory store. The store is unused.

Signed-Off-By: David Anderson <dave@natulte.net>
5 years ago
David Anderson 21280ca2d1 Make ipn.Options.Prefs a pointer.
This is a prelude to making it truly optional, once state
management has moved into the backend. For now though, it's
still required. This change is just isolating the bubbling-up
of the pointerification into other layers.

Signed-Off-By: David Anderson <dave@natulte.net>
5 years ago
David Anderson f6f154193f Remove LoginFlags from Backend options.
- It was only used in one currently-unused client.
- It's an imperative command, not a configuration setting.
- The LoginFlags stuff in controlclient feels like it needs
  a refactor anyway.

I'll put this logic back once ipnd owns its state and Backend
commands reflect that.

Signed-Off-By: David Anderson <dave@natulte.net>
5 years ago
David Anderson 81eedcd5be ipnserver: ignore lint error for unused context.
The linter is strictly correct, but the code is structured
this way to avoid variable shadowing problems in the following
for loop. The context doesn't leak.

Staticcheck is correctly pointing out that this code is hard to
follow. However, this chunk of code is in service of enforcing
one frontend <> one backend, and we want to remove that limitation.
So, we'll just ignore the lint warning until this entire piece of
code goes away.

Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
Shawn Smith 1ca83fd205 fix typos
Signed-off-by: Shawn Smith <shawnpsmith@gmail.com>
5 years ago
David Crawshaw 33dfb8999e controlclient, ipn: update tests for key pointer change
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
5 years ago
David Anderson c3f9f74247 ipn: fix lint complaints in tests.
Signed-off-by: David Anderson <dave@natulte.net>
5 years ago
Earl Lee a8d8b8719a Move Linux client & common packages into a public repo. 5 years ago