tailscale

Commit Graph

Author	SHA1	Message	Date
Josh Bleecher Snyder	96ef8d34ef	ipn/ipnlocal: switch from testify to quicktest Per discussion, we want to have only one test assertion library, and we want to start by exploring quicktest. This was a mostly mechanical translation. I think we could make this nicer by defining a few helper closures at the beginning of the test. Later. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Brad Fitzpatrick	544d8d0ab8	ipn/ipnlocal: remove NewLocalBackendWithClientGen This removes the NewLocalBackendWithClientGen constructor added in `b4d04a065f` and instead adds LocalBackend.SetControlClientGetterForTesting, mirroring LocalBackend.SetHTTPTestClient. NewLocalBackendWithClientGen was weird in being exported but taking an unexported type. This was noted during code review: https://github.com/tailscale/tailscale/pull/1818#discussion_r623155669 which ended in: "I'll leave it for y'all to clean up if you find some way to do it elegantly." This is more idiomatic. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Avery Pennarun	0181a4d0ac	ipnlocal: don't pause the controlclient until we get at least one netmap. Without this, macOS would fail to display its menu state correctly if you started it while !WantRunning. It relies on the netmap in order to show the logged-in username. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	3 years ago
Avery Pennarun	4ef207833b	ipn: !WantRunning + !LoggedOut should not be idle on startup. There was logic that would make a "down" tailscale backend (ie. !WantRunning) refuse to do any network activity. Unfortunately, this makes the macOS and iOS UI unable to render correctly if they start while !WantRunning. Now that we have Prefs.LoggedOut, use that instead. So `tailscale down` will still allow the controlclient to connect its authroutine, but pause the maproutine. `tailscale logout` will entirely stop all activity. This new behaviour is not obviously correct; it's a bit annoying that `tailsale down` doesn't terminate all activity like you might expect. Maybe we should redesign the UI code to render differently when disconnected, and then revert this change. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	3 years ago
Avery Pennarun	4f3315f3da	ipnlocal: setting WantRunning with EditPrefs was special. EditPrefs should be just a wrapper around the action of changing prefs, but someone had added a side effect of calling Login() sometimes. The side effect happened after running the state machine, which would sometimes result in us going into NeedsLogin immediately before calling cc.Login(). This manifested as the macOS app not being able to Connect if you launched it with LoggedOut=false and WantRunning=false. Trying to Connect() would sent us to the NeedsLogin state instead. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	3 years ago
Avery Pennarun	2a4d1cf9e2	Add prefs.LoggedOut to fix several state machine bugs. Fixes: tailscale/corp#1660 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	3 years ago
Avery Pennarun	b0382ca167	ipn/ipnlocal: some state_test cleanups. This doesn't change the actual functionality. Just some additional comments and fine tuning. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	3 years ago
Avery Pennarun	ac9cd48c80	ipnlocal: fix deadlock when calling Shutdown() from Start(). Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	3 years ago
Avery Pennarun	ecdba913d0	Revert "ipn/ipnlocal: be authoritative for the entire MagicDNS record tree." Unfortunately this broke MagicDNS almost entirely. Updates: tailscale/corp#1706 This reverts commit `1d7e7b49eb`.	3 years ago
Avery Pennarun	b7e31ab1a4	ipn: mock controlclient.Client; big ipn.Backend state machine test. A very long unit test that verifies the way the controlclient and ipn.Backend interact. This is a giant sequential test of the state machine. The test passes, but only because it's asserting all the wrong behaviour. I marked all the behaviour I think is wrong with BUG comments, and several additional test opportunities with TODO. Note: the new test supercedes TestStartsInNeedsLoginState, which was checking for incorrect behaviour (although the new test still checks for the same incorrect behaviour) and assumed .Start() would converge before returning, which it happens to do, but only for this very specific case, for the current implementation. You're supposed to wait for the notifications. Updates: tailscale/corp#1660 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	3 years ago
Avery Pennarun	b4d04a065f	controlclient: extract a Client interface and rename Client->Auto. This will let us create a mock or fake Client implementation for use with ipn.Backend. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	3 years ago
David Anderson	1d7e7b49eb	ipn/ipnlocal: be authoritative for the entire MagicDNS record tree. With this change, shared node names resolve correctly on split DNS-supporting operating systems. Fixes tailscale/corp#1706 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	b7a497a30b	ipn/ipnlocal: make FileTargets check IPN state first Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	4bf6939ee0	ipn/ipnlocal: remove t.Parallel from recently added test The test modifies a global; it shouldn't be parallel. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	a48c8991f1	ipn/ipnlocal: add a test for earlier lazy machine key generation change Updates #1573 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	306a094d4b	ipn/ipnlocal: remove IPv6 records from MagicDNS. Fixes #1813. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	3bdc9e9cb2	ipn/ipnlocal: prevent a now-expected [unexpected] log message on Windows Updates #1620 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	138921ae40	ipn/ipnlocal: always write files to partial files, even in buffered mode The intention was always that files only get written to .partial files and renamed at the end once fully received, but somewhere in the process that got lost in buffered mode and .partial files were only being used in direct receive mode. This fix prevents WaitingFiles from returning files that are still being transferred. Updates tailscale/corp#1626 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	5e268e6153	ipn/ipnlocal: use delete marker files to work around Windows delete problems If DeleteFile fails on Windows due to another process (anti-virus, probably) having our file open, instead leave a marker file that the file is logically deleted, and remove it from API calls and clean it up lazily later. Updates tailscale/corp#1626 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Aleksandar Pesic	7c985e4944	ipn/ipnlocal: add file sharing to windows shell Updates: tailscale/winmin#33 Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>	3 years ago
Brad Fitzpatrick	fe53a714bd	ipn/ipnlocal: add a LocalBackend.Start fast path if already running Updates tailscale/corp#1621 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ad1a595a75	ipn/ipnlocal: close peer API listeners on transition away from Running Updates tailscale/corp#1621 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	8a449c4dcd	ipn: define NewBackendServer nil as not affecting Backend's NotifyCallback Updates tailscale/corp#1646 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	36d030cc36	ipn/ipnlocal: use fallback default DNS whenever exit nodes are on. Fixes #1625 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	86e85d8934	ipn/ipnlocal: add peerapi goroutine fetch Between owners. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	2d786821f6	ipn/ipnlocal: put a retry loop around Windows file deletes oh, Windows. Updates tailscale/corp#1626 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	529ef98b2a	ipn/ipnlocal: fix approxSize operator precedence Whoops. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	b03c23d2ed	ipn/ipnlocal: log on DeleteFile error Updates tailscale/corp#1626 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	2f17a34242	ipn/ipnlocal: fix tailscale status --json AuthURL field It was getting cleared on notify. Document that authURL is cleared on notify and add a new field that isn't, using the new field for the JSON status. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	09891b9868	ipn/ipnlocal: on fresh lazy-connecting install, start in state NeedsLogin Fixes #1759 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	91c9c33036	cmd/tailscaled: don't block ipnserver startup behind engine init on Windows With this change, the ipnserver's safesocket.Listen (the localhost tcp.Listen) happens right away, before any synchronous TUN/DNS/Engine/etc setup work, which might be slow, especially on early boot on Windows. Because the safesocket.Listen starts up early, that means localhost TCP dials (the safesocket.Connect from the GUI) complete successfully and thus the GUI avoids the MessageBox error. (I verified that pacifies it, even without a Listener.Accept; I'd feared that Windows localhost was maybe special and avoided the normal listener backlog). Once the GUI can then connect immediately without errors, the various timeouts then matter less, because the backend is no longer trying to race against the GUI's timeout. So keep retrying on errors for a minute, or 10 minutes if the system just booted in the past 10 minutes. This should fix the problem with Windows 10 desktops auto-logging in and starting the Tailscale frontend which was then showing a MessageBox error about failing to connect to tailscaled, which was slow coming up because the Windows networking stack wasn't up yet. Fingers crossed. Fixes #1313 (previously #1187, etc) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	6fd9e28bd0	ipn/ipnlocal: add arpa suffixes to MagicDNS for reverse lookups. This used to not be necessary, because MagicDNS always did full proxying. But with split DNS, we need to know which names to route to our resolver, otherwise reverse lookups break. This captures the entire CGNAT range, as well as our Tailscale ULA. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	48d4f14652	ipn/ipnlocal: only set authoritative domains when using MagicDNS. Otherwise, the existence of authoritative domains forces full DNS proxying even when no other DNS config is present. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	f99e63bb17	ipn: don't Logout when Windows GUI disconnects Logout used to be a no-op, so the ipnserver previously synthensized a Logout on disconnect. Now that Logout actually invalidates the node key that was forcing all GUI closes to log people out. Instead, add a method to LocalBackend to specifically mean "the Windows GUI closed, please forget all the state". Fixes tailscale/corp#1591 (ignoring the notification issues, tracked elsewhere) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	1e5c608fae	ipn/ipnlocal: plumb fallback DNS in as a workaround for split DNS issues. Cause of #1743. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	3d0599fca0	ipn{,/ipnlocal}: in direct file receive mode, don't rename partial file Let caller (macOS) do it so Finder progress bar can be dismissed without races. Updates tailscale/corp#1575 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	a58fbb4da9	ipn/ipnlocal: only fix peerapiListener on Windows when running It's just logspam otherwise. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	36fa29feec	ipn/ipnlocal: restrict local lan access to linux machines. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	8570f82c8b	ipn/ipnlocal: finish/fix up filename validation & encoding on disk It used to just store received files URL-escaped on disk, but that was a half done lazy implementation, and pushed the burden to callers to validate and write things to disk in an unescaped way. Instead, do all the validation in the receive handler and only accept filenames that are UTF-8 and in the intersection of valid names that all platforms support. Fixes tailscale/corp#1594 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	cad8df500c	ipn/ipnlocal: add some more peerapi handlePeerPut tests Updates tailscale/corp#1594 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	0d1550898e	ipn/ipnlocal: add some peerapi tests Updates tailscale/corp#1594 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	8f3e453356	ipn, cmd/tailscale/cli: add pref to configure sudo-free operator user From discussion with @danderson. Fixes #1684 (in a different way) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	49808ae6ea	ipn{,/ipnlocal}, cmd/tailscale/cli: don't check pref reverts on initial up The ipn.NewPrefs func returns a populated ipn.Prefs for historical reasons. It's not used or as important as it once was, but it hasn't yet been removed. Meanwhile, it contains some default values that are used on some platforms. Notably, for this bug (#1725), Windows/Mac use its Prefs.RouteAll true value (to accept subnets), but Linux users have always gotten a "false" value for that, because that's what cmd/tailscale's CLI default flag is _for all operating systems_. That meant that "tailscale up" was rightfully reporting that the user was changing an implicit setting: RouteAll was changing from true with false with the user explicitly saying so. An obvious fix might be to change ipn.NewPrefs to return Prefs.RouteAll == false on some platforms, but the logic is complicated by darwin: we want RouteAll true on windows, android, ios, and the GUI mac app, but not the CLI tailscaled-on-macOS mode. But even if we used build tags (e.g. the "redo" build tag) to determine what the default is, that then means we have duplicated and differing "defaults" between both the CLI up flags and ipn.NewPrefs. Furthering that complication didn't seem like a good idea. So, changing the NewPrefs defaults is too invasive at this stage of the release, as is removing the NewPrefs func entirely. Instead, tweak slightly the semantics of the ipn.Prefs.ControlURL field. This now defines that a ControlURL of the empty string means both "we're uninitialized" and also "just use the default". Then, once we have the "empty-string-means-unintialized" semantics, use that to suppress "tailscale up"'s recent implicit-setting-revert checking safety net, if we've never initialized Tailscale yet. And update/add tests. Fixes #1725 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	4df6e62fbc	ipn: add DefaultControlURL const, replace few literals with it Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	b993d9802a	ipn/ipnlocal, etc: require file sharing capability to send/recv files tailscale/corp#1582 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d6a95d807a	ipn/ipnlocal: advertise netstack to control server Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	762180595d	ipn/ipnstate: add PeerStatus.TailscaleIPs slice, deprecate TailAddr Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	34d2f5a3d9	tailcfg: add Endpoint, EndpointType, MapRequest.EndpointType Track endpoints internally with a new tailcfg.Endpoint type that includes a typed netaddr.IPPort (instead of just a string) and includes a type for how that endpoint was discovered (STUN, local, etc). Use []tailcfg.Endpoint instead of []string internally. At the last second, send it to the control server as the existing []string for endpoints, but also include a new parallel MapRequest.EndpointType []tailcfg.EndpointType, so the control server can start filtering out less-important endpoint changes from new-enough clients. Notably, STUN-discovered endpoints can be filtered out from 1.6+ clients, as they can discover them amongst each other via CallMeMaybe disco exchanges started over DERP. And STUN endpoints change a lot, causing a lot of MapResposne updates. But portmapped endpoints are worth keeping for now, as they they work right away without requiring the firewall traversal extra RTT dance. End result will be less control->client bandwidth. (despite negligible increase in client->control bandwidth) Updates tailscale/corp#1543 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	b91f3c4191	ipn/ipnlocal: fix peerapi printf arg mismatch Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	1f4cf1a4f4	ipn/localapi: only require read access to list file targets Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago

1 2 3 4 5 ...

395 Commits (47ebd1e9a2bb48f0d33db1283101dab1d5053b4d)