817 Commits (4722f7e32283c383f397076799959e246103f02a)

Author	SHA1	Message	Date
Mihai Parparita	4722f7e322	all: move network monitoring from wgengine/monitor to net/netmon ... We're using it in more and more places, and it's not really specific to our use of Wireguard (and does more just link/interface monitoring). Also removes the separate interface we had for it in sockstats -- it's a small enough package (we already pull in all of its dependencies via other paths) that it's not worth the extra complexity. Updates #7621 Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Andrew Dunham	f85dc6f97c	ci: add more lints (#7909) ... This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c	1 year ago
Maisem Ali	85de580455	net/tsdial: do not use proxies when dialing out to PeerAPI ... Found this when adding a test that does a ping over PeerAPI. Our integration tests set up a trafficTrap to ensure that tailscaled does not call out to the internet, and it does so via a HTTP_PROXY. When adding a test for pings over PeerAPI, it triggered the trap and investigation lead to the realization that we were not removing the Proxy when trying to dial out to the PeerAPI. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Mihai Parparita	d0906cda97	net/sockstats: expose debug info ... Exposes some internal state of the sockstats package via the C2N and PeerAPI endpoints, so that it can be used for debugging. For now this includes the estimated radio on percentage and a second-by-second view of the times the radio was active. Also fixes another off-by-one error in the radio on percentage that was leading to >100% values (if n seconds have passed since we started to monitor, there may be n + 1 possible seconds where the radio could have been on). Updates tailscale/corp#9230 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Will Norris	7c386ca6d2	net/sockstats: fix calculation of radio power usage ... When splitting the radio monitor usage array, we were splitting at now % 3600 to get values into chronological order. This caused the value for the final second to be included at the beginning of the ordered slice rather than the end. If there was activity during that final second, an extra five seconds of high power usage would get recorded in some cases. This could result in a final calculation of greater than 100% usage. This corrects that by splitting values at (now+1 % 3600). This also simplifies the percentage calculation by always rounding values down, which is sufficient for our usage. Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Mihai Parparita	c7cea825ae	net/netns: don't log errors when we can't get the default route on Darwin ... It's somewhat common (e.g. when a phone has no reception), and leads to lots of logspam. Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Andrew Dunham	280255acae	various: add golangci-lint, fix issues (#7905) ... This adds an initial and intentionally minimal configuration for golang-ci, fixes the issues reported, and adds a GitHub Action to check new pull requests against this linter configuration. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163	1 year ago
Joe Tsai	ff1b35ec6c	net/connstats: exclude traffic with internal Tailscale service (#7904) ... Exclude traffic with 100.100.100.100 (for IPv4) and with fd7a:115c:a1e0::53 (for IPv6) since this traffic with the Tailscale service running locally on the node. This traffic never left the node. It also happens to be a high volume amount of traffic since DNS requests occur over UDP with each request coming from a unique port, thus resulting in many discrete traffic flows. Fixes tailscale/corp#10554 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	1 year ago
Mihai Parparita	9a655a1d58	net/dnsfallback: more explicitly pass through logf function ... Redoes the approach from #5550 and #7539 to explicitly pass in the logf function, instead of having global state that can be overridden. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Brad Fitzpatrick	162488a775	net/interfaces: cache "home" router lookup on big Linux routers ... This is a continuation of the earlier 2a67beaacf but more aggressive; this now remembers that we failed to find the "home" router IP so we don't try again later on the next call. Updates #7621 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
James Tucker	c5150eae67	net/netcheck: reenable TestNodeAddrResolve on Windows ... Updates #7876 Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: James Tucker <james@tailscale.com> Change-Id: Idb2e6cc2edf6ca123b751d6c8f8729b0cba86023	1 year ago
Brad Fitzpatrick	10f1c90f4d	wgengine/magicsock, types/nettype, etc: finish ReadFromUDPAddrPort netip migration ... So we're staying within the netip.Addr/AddrPort consistently and avoiding allocs/conversions to the legacy net addr types. Updates #5162 Change-Id: I59feba60d3de39f773e68292d759766bac98c917 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	29f7df9d8f	wgengine/magicsock, etc: remove mostly unused WriteTo methods ... Updates #2331 Updates #5162 Change-Id: I8291884425481eeaedde38a54adfd8ed7292a497 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	83c41f3697	net/netcheck: remove unused method from interface ... Updates #2331 Updates #5162 Change-Id: I77ff956c2d59bde611d47523659a07afb4a6da2d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
James Tucker	8dec1a8724	.github/workflows: reenable Windows CI, disable broken tests ... We accidentally switched to ./tool/go in 4022796484 which resulted in no longer running Windows builds, as this is attempting to run a bash script. I was unable to quickly fix the various tests that have regressed, so instead I've added skips referencing #7876, which we need to back and fix. Updates #7262 Updates #7876 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Brad Fitzpatrick	c889254b42	net/art: skip tests on CI for now ... To get the tree green again for other people. Updates #7866 Change-Id: Ibdad2e1408e5f0c97e49a148bfd77aad17c2c5e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Andrew Dunham	228d0c6aea	net/netcheck: use dnscache.Resolver when resolving DERP IPs ... This also adds a bunch of tests for this function to ensure that we're returning the proper IP(s) in all cases. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I0d9d57170dbab5f2bf07abdf78ecd17e0e635399	1 year ago
Maisem Ali	64bbf1738e	tailcfg: make SelfNodeV4MasqAddrForThisPeer a pointer ... This makes `omitempty` actually work, and saves bytes in each map response. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
David Anderson	a5fd51ebdc	net/art: disable the IPv6 100k routes benchmark. ... At the current unoptimized memory utilization of the various data structures, 100k IPv6 routes consumes in the ballpark of 3-4GiB, which risks OOMing our 386 test machine. Until we have the optimizations to (drastically) reduce that consumption, skip the test that bloats too much for 32-bit machines. Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
David Anderson	a7c910e361	net/art: implement the Table type, a multi-level art route table. ... Updates #7781 │ sec/op │ TableInsertion/ipv4/10 1.562µ ± 2% TableInsertion/ipv4/100 2.398µ ± 5% TableInsertion/ipv4/1000 2.097µ ± 3% TableInsertion/ipv4/10000 2.756µ ± 4% TableInsertion/ipv4/100000 2.473µ ± 13% TableInsertion/ipv6/10 7.649µ ± 2% TableInsertion/ipv6/100 12.09µ ± 3% TableInsertion/ipv6/1000 14.84µ ± 5% TableInsertion/ipv6/10000 14.72µ ± 8% TableInsertion/ipv6/100000 13.23µ ± 41% TableDelete/ipv4/10 378.4n ± 5% TableDelete/ipv4/100 366.9n ± 3% TableDelete/ipv4/1000 418.6n ± 3% TableDelete/ipv4/10000 609.2n ± 11% TableDelete/ipv4/100000 679.2n ± 28% TableDelete/ipv6/10 504.2n ± 4% TableDelete/ipv6/100 959.5n ± 12% TableDelete/ipv6/1000 1.436µ ± 6% TableDelete/ipv6/10000 1.772µ ± 15% TableDelete/ipv6/100000 1.172µ ± 113% TableGet/ipv4/10 32.14n ± 11% TableGet/ipv4/100 38.58n ± 2% TableGet/ipv4/1000 45.03n ± 2% TableGet/ipv4/10000 52.90n ± 7% TableGet/ipv4/100000 135.2n ± 11% TableGet/ipv6/10 41.55n ± 1% TableGet/ipv6/100 44.78n ± 2% TableGet/ipv6/1000 49.03n ± 2% TableGet/ipv6/10000 65.38n ± 5% TableGet/ipv6/100000 525.0n ± 39% │ avg-B/op │ TableInsertion/ipv4/10 25.18Ki ± 0% TableInsertion/ipv4/100 17.63Ki ± 0% TableInsertion/ipv4/1000 14.14Ki ± 0% TableInsertion/ipv4/10000 12.92Ki ± 0% TableInsertion/ipv4/100000 11.13Ki ± 0% TableInsertion/ipv6/10 76.87Ki ± 0% TableInsertion/ipv6/100 98.33Ki ± 0% TableInsertion/ipv6/1000 91.44Ki ± 0% TableInsertion/ipv6/10000 90.39Ki ± 0% TableInsertion/ipv6/100000 87.19Ki ± 0% TableDelete/ipv4/10 3.230 ± 0% TableDelete/ipv4/100 4.020 ± 0% TableDelete/ipv4/1000 3.990 ± 0% TableDelete/ipv4/10000 4.000 ± 0% TableDelete/ipv4/100000 4.000 ± 0% TableDelete/ipv6/10 16.00 ± 0% TableDelete/ipv6/100 16.00 ± 0% TableDelete/ipv6/1000 16.00 ± 0% TableDelete/ipv6/10000 16.00 ± 0% TableDelete/ipv6/100000 16.00 ± 0% │ avg-allocs/op │ TableInsertion/ipv4/10 2.900 ± 0% TableInsertion/ipv4/100 2.330 ± 0% TableInsertion/ipv4/1000 2.070 ± 0% TableInsertion/ipv4/10000 1.980 ± 0% TableInsertion/ipv4/100000 1.840 ± 0% TableInsertion/ipv6/10 6.800 ± 0% TableInsertion/ipv6/100 8.420 ± 0% TableInsertion/ipv6/1000 7.900 ± 0% TableInsertion/ipv6/10000 7.820 ± 0% TableInsertion/ipv6/100000 7.580 ± 0% TableDelete/ipv4/10 1.000 ± 0% TableDelete/ipv4/100 1.000 ± 0% TableDelete/ipv4/1000 1.000 ± 0% TableDelete/ipv4/10000 1.000 ± 0% TableDelete/ipv4/100000 1.000 ± 0% TableDelete/ipv6/10 1.000 ± 0% TableDelete/ipv6/100 1.000 ± 0% TableDelete/ipv6/1000 1.000 ± 0% TableDelete/ipv6/10000 1.000 ± 0% TableDelete/ipv6/100000 1.000 ± 0% │ routes/s │ TableInsertion/ipv4/10 640.3k ± 2% TableInsertion/ipv4/100 417.1k ± 5% TableInsertion/ipv4/1000 477.0k ± 3% TableInsertion/ipv4/10000 362.8k ± 5% TableInsertion/ipv4/100000 404.5k ± 15% TableInsertion/ipv6/10 130.7k ± 1% TableInsertion/ipv6/100 82.69k ± 3% TableInsertion/ipv6/1000 67.37k ± 5% TableInsertion/ipv6/10000 67.93k ± 9% TableInsertion/ipv6/100000 75.63k ± 29% TableDelete/ipv4/10 2.642M ± 6% TableDelete/ipv4/100 2.726M ± 3% TableDelete/ipv4/1000 2.389M ± 3% TableDelete/ipv4/10000 1.641M ± 12% TableDelete/ipv4/100000 1.472M ± 27% TableDelete/ipv6/10 1.984M ± 4% TableDelete/ipv6/100 1.042M ± 11% TableDelete/ipv6/1000 696.5k ± 6% TableDelete/ipv6/10000 564.4k ± 13% TableDelete/ipv6/100000 853.6k ± 53% │ addrs/s │ TableGet/ipv4/10 31.11M ± 10% TableGet/ipv4/100 25.92M ± 2% TableGet/ipv4/1000 22.21M ± 2% TableGet/ipv4/10000 18.91M ± 8% TableGet/ipv4/100000 7.397M ± 12% TableGet/ipv6/10 24.07M ± 1% TableGet/ipv6/100 22.33M ± 2% TableGet/ipv6/1000 20.40M ± 2% TableGet/ipv6/10000 15.30M ± 5% TableGet/ipv6/100000 1.905M ± 28% │ B/op │ TableGet/ipv4/10 4.000 ± 0% TableGet/ipv4/100 4.000 ± 0% TableGet/ipv4/1000 4.000 ± 0% TableGet/ipv4/10000 4.000 ± 0% TableGet/ipv4/100000 4.000 ± 0% TableGet/ipv6/10 16.00 ± 0% TableGet/ipv6/100 16.00 ± 0% TableGet/ipv6/1000 16.00 ± 0% TableGet/ipv6/10000 16.00 ± 0% TableGet/ipv6/100000 16.00 ± 0% │ allocs/op │ TableGet/ipv4/10 1.000 ± 0% TableGet/ipv4/100 1.000 ± 0% TableGet/ipv4/1000 1.000 ± 0% TableGet/ipv4/10000 1.000 ± 0% TableGet/ipv4/100000 1.000 ± 0% TableGet/ipv6/10 1.000 ± 0% TableGet/ipv6/100 1.000 ± 0% TableGet/ipv6/1000 1.000 ± 0% TableGet/ipv6/10000 1.000 ± 0% TableGet/ipv6/100000 1.000 ± 0% Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
Mihai Parparita	edb02b63f8	net/sockstats: pass in logger to sockstats.WithSockStats ... Using log.Printf may end up being printed out to the console, which is not desirable. I noticed this when I was investigating some client logs with `sockstats: trace "NetcheckClient" was overwritten by another`. That turns to be harmless/expected (the netcheck client will fall back to the DERP client in some cases, which does its own sockstats trace). However, the log output could be visible to users if running the `tailscale netcheck` CLI command, which would be needlessly confusing. Updates tailscale/corp#9230 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Mihai Parparita	782ccb5655	.github/workflows: run one set of tests with the tailscale_go build tag ... We use it to gate code that depends on custom Go toolchain, but it's currently only passed in the corp runners. Add a set on OSS so that we can catch regressions earlier. To specifically test sockstats this required adding a build tag to explicitly enable them -- they're normally on for iOS, macOS and Android only, and we don't run tests on those platforms normally. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Mihai Parparita	e978299bf0	net/sockstats: disable deltas for the cell radio power state metric ... Updates tailscale/corp#9230 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Will Norris	22680a11ae	net/sockstats: return early if no radio period length ... Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Will Norris	75784e10e2	sockstats: add client metrics for radio power state ... power state is very roughly approximated based on observed network activity and AT&T's state transition timings for a typical 3G radio. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Tom DNetto	6a627e5a33	net, wgengine/capture: encode NAT addresses in pcap stream ... Signed-off-by: Tom DNetto <tom@tailscale.com>	1 year ago
Jordan Whited	f475e5550c	net/neterror, wgengine/magicsock: use UDP GSO and GRO on Linux (#7791) ... This commit implements UDP offloading for Linux. GSO size is passed to and from the kernel via socket control messages. Support is probed at runtime. UDP GSO is dependent on checksum offload support on the egress netdev. UDP GSO will be disabled in the event sendmmsg() returns EIO, which is a strong signal that the egress netdev does not support checksum offload. Updates tailscale/corp#8734 Signed-off-by: Jordan Whited <jordan@tailscale.com>	1 year ago
David Anderson	4d1b3bc26f	net/art: implement the stride table building block of ART ... A stride table is an 8-bit routing table implemented as an array binary tree, with a special tree updating function (allot) that enables lightning fast address lookups and reasonably fast insertion and deletion. Insertion, deletion and lookup are all allocation-free. Updates #7781 │ sec/op │ StrideTableInsertion/10/random_order 16.79n ± 2% StrideTableInsertion/10/largest_first 16.83n ± 1% StrideTableInsertion/10/smallest_first 16.83n ± 0% StrideTableInsertion/50/random_order 17.84n ± 1% StrideTableInsertion/50/largest_first 20.04n ± 1% StrideTableInsertion/50/smallest_first 16.39n ± 0% StrideTableInsertion/100/random_order 14.63n ± 0% StrideTableInsertion/100/largest_first 17.45n ± 4% StrideTableInsertion/100/smallest_first 12.98n ± 0% StrideTableInsertion/200/random_order 12.51n ± 4% StrideTableInsertion/200/largest_first 18.36n ± 3% StrideTableInsertion/200/smallest_first 9.609n ± 3% StrideTableDeletion/10/random_order 19.50n ± 1% StrideTableDeletion/10/largest_first 19.34n ± 0% StrideTableDeletion/10/smallest_first 19.43n ± 0% StrideTableDeletion/50/random_order 14.58n ± 1% StrideTableDeletion/50/largest_first 14.27n ± 2% StrideTableDeletion/50/smallest_first 15.51n ± 0% StrideTableDeletion/100/random_order 12.02n ± 3% StrideTableDeletion/100/largest_first 10.64n ± 0% StrideTableDeletion/100/smallest_first 13.21n ± 3% StrideTableDeletion/200/random_order 14.05n ± 4% StrideTableDeletion/200/largest_first 9.288n ± 5% StrideTableDeletion/200/smallest_first 18.51n ± 1% StrideTableGet 0.5010n ± 0% │ routes/s │ StrideTableInsertion/10/random_order 59.55M ± 2% StrideTableInsertion/10/largest_first 59.42M ± 1% StrideTableInsertion/10/smallest_first 59.43M ± 0% StrideTableInsertion/50/random_order 56.04M ± 1% StrideTableInsertion/50/largest_first 49.91M ± 1% StrideTableInsertion/50/smallest_first 61.00M ± 0% StrideTableInsertion/100/random_order 68.35M ± 0% StrideTableInsertion/100/largest_first 57.32M ± 3% StrideTableInsertion/100/smallest_first 77.06M ± 0% StrideTableInsertion/200/random_order 79.93M ± 4% StrideTableInsertion/200/largest_first 54.47M ± 3% StrideTableInsertion/200/smallest_first 104.1M ± 3% StrideTableDeletion/10/random_order 51.28M ± 1% StrideTableDeletion/10/largest_first 51.70M ± 0% StrideTableDeletion/10/smallest_first 51.48M ± 0% StrideTableDeletion/50/random_order 68.60M ± 1% StrideTableDeletion/50/largest_first 70.09M ± 2% StrideTableDeletion/50/smallest_first 64.45M ± 0% StrideTableDeletion/100/random_order 83.21M ± 3% StrideTableDeletion/100/largest_first 94.03M ± 0% StrideTableDeletion/100/smallest_first 75.69M ± 3% StrideTableDeletion/200/random_order 71.20M ± 5% StrideTableDeletion/200/largest_first 107.7M ± 5% StrideTableDeletion/200/smallest_first 54.02M ± 1% StrideTableGet 1.996G ± 0% Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
James Tucker	40fa2a420c	envknob,net/tstun,wgengine: use TS_DEBUG_MTU consistently ... Noted on #5915 TS_DEBUG_MTU was not used consistently everywhere. Extract the default into a function that can apply this centrally and use it everywhere. Added envknob.Lookup{Int,Uint}Sized to make it easier to keep CodeQL happy when using converted values. Updates #5915 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Will Norris	e99c7c3ee5	sockstats: add labels for netlog and sockstatlog packages ... Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Andrew Dunham	38e4d303a2	net/tshttpproxy: don't proxy through ourselves ... When running a SOCKS or HTTP proxy, configure the tshttpproxy package to drop those addresses from any HTTP_PROXY or HTTPS_PROXY environment variables. Fixes #7407 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I6cd7cad7a609c639780484bad521c7514841764b	1 year ago
Maisem Ali	985535aebc	net/tstun,wgengine/*: add support for NAT to routes ... This adds support to make exit nodes and subnet routers work when in scenarios where NAT is required. It also updates the NATConfig to be generated from a `wgcfg.Config` as that handles merging prefs with the netmap, so it has the required information about whether an exit node is already configured and whether routes are accepted. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	d1d5d52b2c	net/tstun/table: add initial RoutingTable implementation ... It is based on `*tempfork/device.AllowedIPs`. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Jordan Whited	27e37cf9b3	go.mod, net/tstun, wgengine/magicsock: update wireguard-go (#7712) ... This commit updates the wireguard-go dependency to pull in fixes for the tun package, specifically 052af4a and aad7fca. Signed-off-by: Jordan Whited <jordan@tailscale.com>	1 year ago
Maisem Ali	d2fd101eb4	net/tstun: only log natConfig on changes ... Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Andrew Dunham	33b359642e	net/dns: don't send on closed channel in resolvedManager ... Fixes #7686 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ibffb05539ab876b12407d77dcf2201d467895981	1 year ago
Andrew Dunham	4cb1bfee44	net/netcheck: improve determinism in hairpinning test ... If multiple Go channels have a value (or are closed), receiving from them all in a select will nondeterministically return one of the two arms. In this case, it's possible that the hairpin check timer will have expired between when we start checking and before we check at all, but the hairpin packet has already been received. In such cases, we'd nondeterministically set report.HairPinning. Instead, check if we have a value in our results channel first, then select on the value and timeout channel after. Also, add a test that catches this particular failure. Fixes #1795 Change-Id: I842ab0bd38d66fabc6cabf2c2c1bb9bd32febf35 Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	1 year ago
Maisem Ali	0e203e414f	net/packet: add checksum update tests ... Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	0bf8c8e710	net/tstun: use p.Buffer() in more places ... Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	bb31fd7d1c	net/tstun: add inital support for NAT v4 ... This adds support in tstun to utitilize the SelfNodeV4MasqAddrForThisPeer and perform the necessary modifications to the packet as it passes through tstun. Currently this only handles ICMP, UDP and TCP traffic. Subnet routers and Exit Nodes are also unsupported. Updates tailscale/corp#8020 Co-authored-by: Melanie Warrick <warrick@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	535fad16f8	net/tstun: rename filterIn/filterOut methods to be more descriptive ... Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Mihai Parparita	d2dec13392	net/sockstats: export cellular-only clientmetrics ... Followup to #7518 to also export client metrics when the active interface is cellular. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Denton Gentry	ebc630c6c0	net/interfaces: also allow link-local for AzureAppServices. ... In May 2021, Azure App Services used 172.16.x.x addresses: ``` 10: eth0@if11: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP link/ether 02:42:ac:10:01:03 brd ff:ff:ff:ff:ff:ff inet 172.16.1.3/24 brd 172.16.1.255 scope global eth0 valid_lft forever preferred_lft forever ``` Now it uses link-local: ``` 2: eth0@if6: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP link/ether 8a:30:1f:50:1d:23 brd ff:ff:ff:ff:ff:ff inet 169.254.129.3/24 brd 169.254.129.255 scope global eth0 valid_lft forever preferred_lft forever ``` This is reasonable for them to choose to do, it just broke the handling in net/interfaces. This PR proposes to: 1. Always allow link-local in LocalAddresses() if we have no better address available. 2. Continue to make isUsableV4() conditional on an environment we know requires it. I don't love the idea of having to discover these environments one by one, but I don't understand the consequences of making isUsableV4() return true unconditionally. It makes isUsableV4() essentially always return true and perform no function. Fixes https://github.com/tailscale/tailscale/issues/7603 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	1 year ago
Mihai Parparita	97b6d3e917	sockstats: remove per-interface stats from Get ... They're not needed for the sockstats logger, and they're somewhat expensive to return (since they involve the creation of a map per label). We now have a separate GetInterfaces() method that returns them instead (which we can still use in the PeerAPI debug endpoint). If changing sockstatlog to sample at 10,000 Hz (instead of the default of 10Hz), the CPU usage would go up to 59% on a iPhone XS. Removing the per-interface stats drops it to 20% (a no-op implementation of Get that returns a fixed value is 16%). Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Will Norris	a1d9f65354	ipn,log: add logger for sockstat deltas ... Signed-off-by: Will Norris <will@tailscale.com> Co-authored-by: Melanie Warrick <warrick@tailscale.com>	1 year ago
Maisem Ali	5e8a80b845	all: replace /kb/ links with /s/ equivalents ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Andrew Dunham	83fa17d26c	various: pass logger.Logf through to more places ... Updates #7537 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Id89acab70ea678c8c7ff0f44792d54c7223337c6	1 year ago
Mihai Parparita	b64d78d58f	sockstats: refactor validation to be opt-in ... Followup to #7499 to make validation a separate function ( GetWithValidation vs. Get). This way callers that don't need it don't pay the cost of a syscall per active TCP socket. Also clears the conn on close, so that we don't double-count the stats. Also more consistently uses Go doc comments for the exported API of the sockstats package. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Mihai Parparita	ea81bffdeb	sockstats: export as client metrics ... Though not fine-grained enough to be useful for detailed analysis, we might as well export that we gather as client metrics too, since we have an upload/analysis pipeline for them. clientmetric.Metric.Add is an atomic add, so it's pretty cheap to also do per-packet. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Mihai Parparita	4c2f67a1d0	net/sockstat: fix per-interface statistics not always being available ... withSockStats may be called before setLinkMonitor, in which case we don't have a populated knownInterfaces map. Since we pre-populate the per-interface counters at creation time, we would end up with an empty map. To mitigate this, we do an on-demand request for the list of interfaces. This would most often happen with the logtail instrumentation, since we initialize it very early on. Updates tailscale/corp#9230 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago