344 Commits (3afebbbc474ab8516b9933866ee97508c8330800)

Author	SHA1	Message	Date
David Anderson	7e6a1ef4f1	tailcfg: use key.NodePublic in wire protocol types. ... Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	c17250cee2	ipn/ipnstate: use key.NodePublic instead of tailcfg.NodeKey. ... Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	c3d7115e63	wgengine: use key.NodePublic instead of tailcfg.NodeKey. ... Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	72ace0acba	wgengine/magicsock: use key.NodePublic instead of tailcfg.NodeKey. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	418adae379	various: use NodePublic.AsNodeKey() instead of tailcfg.NodeKeyFromNodePublic() ... Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	ccd36cb5b1	wgengine: remove use of legacy key parsing helper. ... Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	ef241f782e	wgengine/magicsock: remove uses of tailcfg.DiscoKey. ... Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	55b6753c11	wgengine/magicsock: remove use of key.{Public,Private}. ... Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	c1d009b9e9	ipn/ipnstate: use key.NodePublic instead of the generic key.Public. ... Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	c9bf773312	wgengine/magicsock: replace use of wgkey with new node key type. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	a9c78910bd	wgengine/wgcfg: convert to use new node key type. ... Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Maisem Ali	85fa1b0d61	wgengine: fail NewUserspaceEngine if wireguard device doesn't come up ... Just something I ran across while debugging an unrelated failure. This is not in response to any bug/issue. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Avery Pennarun	0d4a0bf60e	magicsock: if STUN failed to send before, rebind before STUNning again. ... On iOS (and possibly other platforms), sometimes our UDP socket would get stuck in a state where it was bound to an invalid interface (or no interface) after a network reconfiguration. We can detect this by actually checking the error codes from sending our STUN packets. If we completely fail to send any STUN packets, we know something is very broken. So on the next STUN attempt, let's rebind the UDP socket to try to correct any problems. This fixes a problem where iOS would sometimes get stuck using DERP instead of direct connections until the backend was restarted. Fixes #2994 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	3 years ago
Denton Gentry	93c2882a2f	wgengine: flush DNS cache after major link change. ... Windows has a public dns.Flush used in router_windows.go. However that won't work for platforms like Linux, where we need a different flush mechanism for resolved versus other implementations. We're instead adding a FlushCaches method to the dns Manager, which can be made to work on all platforms as needed. Fixes https://github.com/tailscale/tailscale/issues/2132 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Brad Fitzpatrick	dabeda21e0	net/tstun: block looped disco traffic ... Updates #1526 (maybe fixes? time will tell) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Crawshaw	9502b515f1	net/dns: replace resolver IPs with type for DoH ... We currently plumb full URLs for DNS resolvers from the control server down to the client. But when we pass the values into the net/dns package, we throw away any URL that isn't a bare IP. This commit continues the plumbing, and gets the URL all the way to the built in forwarder. (It stops before plumbing URLs into the OS configurations that can handle them.) For #2596 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Brad Fitzpatrick	7bfd4f521d	cmd/tailscale: fix "tailscale ip $self-host-hostname" ... And in the process, fix the related confusing error messages from pinging your own IP or hostname. Fixes #2803 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	f90ac11bd8	wgengine: remove unnecessary magicConnStarted channel. ... Having removed magicconn.Start, there's no need to synchronize startup of other things to it any more. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	bb10443edf	wgengine/wgcfg: use just the hexlified node key as the WireGuard endpoint. ... The node key is all magicsock needs to find the endpoint that WireGuard needs. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	dfd978f0f2	wgengine/magicsock: use NodeKey, not DiscoKey, as the trigger for lazy reconfig. ... Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	4c27e2fa22	wgengine/magicsock: remove Start method from Conn. ... Over time, other magicsock refactors have made Start effectively a no-op, except that some other functions choose to panic if called before Start. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Maisem Ali	fd4838dc57	wgengine/userspace: add support to automatically enable/disable the tailscale ... protocol in BIRD, when the node is a primary subnet router as determined by control. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	7fcf86a14a	wgengine: fix link monitor / magicsock Start race ... Fixes #2733 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	6ef734e493	wgengine: predict min.Peers length across calls ... The number of peers we have will be pretty stable across time. Allocate roughly the right slice size. This reduces memory usage when there are many peers. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	adf696172d	wgengine/userspace: reduce allocations in getStatus ... Two optimizations. Use values instead of pointers. We were using pointers to make track the "peer in progress" easier. It's not too hard to do it manually, though. Make two passes through the data, so that we can size our return value accurately from the beginning. This is cheap enough compared to the allocation, which grows linearly in the number of peers, that it is worth doing. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	a729070252	net/tstun: add start of Linux TAP support, with DHCP+ARP server ... Still very much a prototype (hard-coded IPs, etc) but should be non-invasive enough to submit at this point and iterate from here. Updates #2589 Co-Author: David Crawshaw <crawshaw@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	f6e833748b	wgengine: use mono.Time ... Migrate wgengine to mono.Time for performance-sensitive call sites. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	5c266bdb73	wgengine: re-set DNS config on Linux after a major link change ... Updates #2458 (maybe fixes it) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Joe Tsai	9a0c8bdd20	util/deephash: make hash type opaque ... The fact that Hash returns a [sha256.Size]byte leaks details about the underlying hash implementation. This could very well be any other hashing algorithm with a possible different block size. Abstract this implementation detail away by declaring an opaque type that is comparable. While we are changing the signature of UpdateHash, rename it to just Update to reduce stutter (e.g., deephash.Update). Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Brad Fitzpatrick	700badd8f8	util/deephash: move internal/deephash to util/deephash ... No code changes. Just a minor package doc addition about lack of API stability.	3 years ago
Brad Fitzpatrick	c45bfd4180	wgengine: make dnsIPsOverTailscale also consider DefaultResolvers ... Found during a failed experiment debugging something on Android. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	45e64f2e1a	net/dns{,/resolver}: refactor DNS forwarder, send out of right link on macOS/iOS ... Fixes #2224 Fixes tailscale/corp#2045 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Crawshaw	4ce15505cb	wgengine: randomize client port if netmap says to ... For testing out #2187 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Josh Bleecher Snyder	1ece91cede	go.mod: upgrade wireguard-windows, de-fork wireguard-go ... Pull in the latest version of wireguard-windows. Switch to upstream wireguard-go. This requires reverting all of our import paths. Unfortunately, this has to happen at the same time. The wireguard-go change is very low risk, as that commit matches our fork almost exactly. (The only changes are import paths, CI files, and a go.mod entry.) So if there are issues as a result of this commit, the first place to look is wireguard-windows changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	73adbb7a78	wgengine: pass an addressable value to deephash.UpdateHash ... This makes deephash more efficient. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types ... This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w*(.*)\.Port = (.*) -> $1 = $1.WithPort($2) \w*(.*)\.IP = (.*) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	ebcd7ab890	wgengine: remove wireguard-go DeviceOptions ... We no longer need them. This also removes the 32 bytes of prefix junk before endpoints. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	aacb2107ae	all: add extra information to serialized endpoints ... magicsock.Conn.ParseEndpoint requires a peer's public key, disco key, and legacy ip/ports in order to do its job. We currently accomplish that by: * adding the public key in our wireguard-go fork * encoding the disco key as magic hostname * using a bespoke comma-separated encoding It's a bit messy. Instead, switch to something simpler: use a json-encoded struct containing exactly the information we need, in the form we use it. Our wireguard-go fork still adds the public key to the address when it passes it to ParseEndpoint, but now the code compensating for that is just a couple of simple, well-commented lines. Once this commit is in, we can remove that part of the fork and remove the compensating code. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Brad Fitzpatrick	36a26e6a71	internal/deephash: rename from deepprint ... Yes, it printed, but that was an implementation detail for hashing. And coming optimization will make it print even less. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	68911f6778	wgengine/bench: ignore "engine closing" errors ... On benchmark completion, we shut down the wgengine. If we happen to poll for status during shutdown, we get an "engine closing" error. It doesn't hurt anything; ignore it. Fixes tailscale/corp#1776 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	73ad1f804b	wgengine/wgcfg: use autogenerated Clone methods ... Delete the manually written ones named Copy. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	ed63a041bf	wgengine/userspace: delete HandshakeDone ... It is unused, and has been since early Feb 2021 (Tailscale 1.6). We can't get delete the DeviceOptions entirely yet; first #1831 and #1839 need to go in, along with some wireguard-go changes. Deleting this chunk of code now will make the later commits more clearly correct. Pingers can now go too. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	7629cd6120	net/tsaddr: add NewContainsIPFunc (move from wgengine) ... I want to use this from netstack but it's not exported. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	bb2141e0cf	wgengine: periodically poll engine status for logging side effect ... Fixes tailscale/corp#1560 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	3c9dea85e6	wgengine: update a log line from 'weird' to conventional 'unexpected' ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	99705aa6b7	net/tstun: split TUN events channel into up/down and MTU ... We had a long-standing bug in which our TUN events channel was being received from simultaneously in two places. The first is wireguard-go. At wgengine/userspace.go:366, we pass e.tundev to wireguard-go, which starts a goroutine (RoutineTUNEventReader) that receives from that channel and uses events to adjust the MTU and bring the device up/down. At wgengine/userspace.go:374, we launch a goroutine that receives from e.tundev, logs MTU changes, and triggers state updates when up/down changes occur. Events were getting delivered haphazardly between the two of them. We don't really want wireguard-go to receive the up/down events; we control the state of the device explicitly by calling device.Up. And the userspace.go loop MTU logging duplicates logging that wireguard-go does when it received MTU updates. So this change splits the single TUN events channel into up/down and other (aka MTU), and sends them to the parties that ought to receive them. I'm actually a bit surprised that this hasn't caused more visible trouble. If a down event went to wireguard-go but the subsequent up event went to userspace.go, we could end up with the wireguard-go device disappearing. I believe that this may also (somewhat accidentally) be a fix for #1790. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Brad Fitzpatrick	34d2f5a3d9	tailcfg: add Endpoint, EndpointType, MapRequest.EndpointType ... Track endpoints internally with a new tailcfg.Endpoint type that includes a typed netaddr.IPPort (instead of just a string) and includes a type for how that endpoint was discovered (STUN, local, etc). Use []tailcfg.Endpoint instead of []string internally. At the last second, send it to the control server as the existing []string for endpoints, but also include a new parallel MapRequest.EndpointType []tailcfg.EndpointType, so the control server can start filtering out less-important endpoint changes from new-enough clients. Notably, STUN-discovered endpoints can be filtered out from 1.6+ clients, as they can discover them amongst each other via CallMeMaybe disco exchanges started over DERP. And STUN endpoints change a lot, causing a lot of MapResposne updates. But portmapped endpoints are worth keeping for now, as they they work right away without requiring the firewall traversal extra RTT dance. End result will be less control->client bandwidth. (despite negligible increase in client->control bandwidth) Updates tailscale/corp#1543 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	854d5d36a1	net/dns: return error from NewOSManager, use it to initialize NM. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	84430cdfa1	net/dns: improve NetworkManager detection, using more DBus. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	d488678fdc	cmd/tailscaled, wgengine{,/netstack}: add netstack hybrid mode, add to Windows ... For #707 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	7d84ee6c98	net/dns: unify the OS manager and internal resolver. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	1bf91c8123	net/dns/resolver: remove unused err return value. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	f007a9dd6b	health: add DNS subsystem and plumb errors in. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	4c61ebacf4	wgengine: move DNS configuration out of wgengine/router. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	b3ceca1dd7	wgengine/...: split into multiple receive functions ... Upstream wireguard-go has changed its receive model. NewDevice now accepts a conn.Bind interface. The conn.Bind is stateless; magicsock.Conns are stateful. To work around this, we add a connBind type that supports cheap teardown and bring-up, backed by a Conn. The new conn.Bind allows us to specify a set of receive functions, rather than having to shoehorn everything into ReceiveIPv4 and ReceiveIPv6. This lets us plumbing DERP messages directly into wireguard-go, instead of having to mux them via ReceiveIPv4. One consequence of the new conn.Bind layer is that closing the wireguard-go device is now indistinguishable from the routine bring-up and tear-down normally experienced by a conn.Bind. We thus have to explicitly close the magicsock.Conn when the close the wireguard-go device. One downside of this change is that we are reliant on wireguard-go to call receiveDERP to process DERP messages. This is fine for now, but is perhaps something we should fix in the future. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	6ad44f9fdf	wgengine: take in dns.Config, split out to resolver.Config and dns.OSConfig. ... Stepping stone towards having the DNS package handle the config splitting. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	1df162b05b	wgengine/magicsock: adapt CreateEndpoint signature to match wireguard-go ... Part of a temporary change to make merging wireguard-go easier. See https://github.com/tailscale/wireguard-go/pull/45. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	90f82b6946	net/dns/resolver: add live reconfig, plumb through to ipnlocal. ... The resolver still only supports a single upstream config, and ipn/wgengine still have to split up the DNS config, but this moves closer to unifying the DNS configs. As a handy side-effect of the refactor, IPv6 MagicDNS records exist now. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	f185d62dc8	net/dns/resolver: unexport Packet, only use it internally. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	5fb9e00ecf	net/dns/resolver: remove Start method, fully spin up in New instead. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	075fb93e69	net/dns/resolver: remove the Config struct. ... In preparation for reintroducing a runtime reconfig Config struct. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	bc81dd4690	net/dns/resolver: rename ResolverConfig to just Config. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	d99f5b1596	net/dns/resolver: factor the resolver out into a sub-package. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	4c83bbf850	wgengine: add IsNetstack func and test ... So we have a documented & tested way to check whether we're in netstack mode. To be used by future commits. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	91bc723817	wgengine: add temp workaround for netstack WhoIs registration race ... Updates #1616 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	41e4e02e57	net/{packet,tstun}: send peerapi port in TSMP pongs ... For discovery when an explicit hostname/IP is known. We'll still also send it via control for finding peers by a list. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	07bf4eb685	wgengine: rename Fake to RespondToPing. ... "Fake" doesn't mean a lot any more, given that many components of the engine can be faked out, including in valid production configurations like userspace-networking. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	0fb738760f	wgengine: make Tun optional again, default to fake. ... This makes setup more explicit in prod codepaths, without requiring a bunch of arguments or helpers for tests and userspace mode. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	e18c3a7d84	wgengine: optimize isLocalAddr a bit ... On macOS/iOS, this removes a map lookup per outgoing packet. Noticed it while reading code, not from profiles, but can't hurt. BenchmarkGenLocalAddrFunc BenchmarkGenLocalAddrFunc/map1 BenchmarkGenLocalAddrFunc/map1-4 16184868 69.78 ns/op BenchmarkGenLocalAddrFunc/map2 BenchmarkGenLocalAddrFunc/map2-4 16878140 70.73 ns/op BenchmarkGenLocalAddrFunc/or1 BenchmarkGenLocalAddrFunc/or1-4 623055721 1.950 ns/op BenchmarkGenLocalAddrFunc/or2 BenchmarkGenLocalAddrFunc/or2-4 472493098 2.589 ns/op Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	93a4aa697c	wgengine: default Router to a no-op router. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	440effb21a	wgengine: remove Config.TUN argument.	4 years ago
David Anderson	2df8adef9d	wgengine: make the tun.Device required at construction. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	016de16b2e	net/tstun: rename TUN to Wrapper. ... The tstun packagen contains both constructors for generic tun Devices, and a wrapper that provides additional functionality. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	82ab7972f4	net/tstun: rename NewFakeTUN to NewFake. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	588b70f468	net/tstun: merge in wgengine/tstun. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	2b4bfeda1a	wgengine: pass in an explicit router.Router, rather than a generator. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	44d9929208	wgengine: remove Config.TUNName, require caller to create device. ... Also factors out device creation and associated OS workarounds to net/tun. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	0a84aaca0a	wgengine/router: remove unused wireguard *Device argument. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	672731ac6f	many: gofmt. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	8432999835	Move wgengine/tsdns to net/dns. ... Straight move+fixup, no other changes. In prep for merging with wgengine/router/dns. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	28af46fb3b	wgengine: pass logger as a separate arg to device.NewDevice ... Adapt to minor API changes in wireguard-go. And factor out device.DeviceOptions variables. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	2384c112c9	net/packet, wgengine/{filter,tstun}: add TSMP ping ... Fixes #1467 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	96dfeb2d7f	wgengine: log tailscale pings ... Fixes #1561 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	85138d3183	health: track whether any network interface is up ... Fixes #1562 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	0994a9f7c4	wgengine{,/magicsock}: fix, improve "tailscale ping" to default routes and subnets ... e.g. $ tailscale ping 1.1.1.1 exit node found but not enabled $ tailscale ping 10.2.200.2 node "tsbfvlan2" found, but not using its 10.2.200.0/24 route $ sudo tailscale up --accept-routes $ tailscale ping 10.2.200.2 pong from tsbfvlan2 (100.124.196.94) via 10.2.200.34:41641 in 1ms $ tailscale ping mon.ts.tailscale.com pong from monitoring (100.88.178.64) via DERP(sfo) in 83ms pong from monitoring (100.88.178.64) via DERP(sfo) in 21ms pong from monitoring (100.88.178.64) via [2604:a880:4:d1::37:d001]:41641 in 22ms This necessarily moves code up from magicsock to wgengine, so we can look at the actual wireguard config. Fixes #1564 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	1eb95c7e32	net/packet, wgengine{,/filter}: remove net/packet IPProto forwarding consts ... Only use the ones in types/ipproto now. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Naman Sood	770aa71ffb	client, cmd/hello, ipn, wgengine: fix whois for netstack-forwarded connections ... Updates #504 Updates #707 Signed-off-by: Naman Sood <mail@nsood.in>	4 years ago
Brad Fitzpatrick	44ab0acbdb	net/portmapper, wgengine/monitor: cache gateway IP info until link changes ... Cuts down allocs & CPU in steady state (on regular STUN probes) when network is unchanging. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	f9f3b67f3a	wgengine{,tsdns}: rebind MagicDNS forwarders on link change ... Fixes #1480 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ffa70a617d	wgengine{,/monitor}: restore Engine.LinkChange, add Mon.InjectEvent ... The Engine.LinkChange method was recently removed in e3df29d488 while misremembering how Android's link state mechanism worked. Rather than do some last minute rearchitecting of link state on Android before Tailscale 1.6, restore the old Engine.LinkChange hook for now so the Android client doesn't need any changes. But change how it's implemented to instead inject an event into the link monitor. Fixes #1427 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	487c520109	wgengine: fix bug from earlier commit ... Commit e3df29d488 introduced this bug where the interfaces-were-changed-or-not bit got lost. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	e3df29d488	wgengine{,/monitor}: move interface state fetching/comparing to monitor ... Gets it out of wgengine so the Engine isn't responsible for being a callback registration hub for it. This also removes the Engine.LinkChange method, as it's no longer necessary. The monitor tells us about changes; it doesn't seem to need any help. (Currently it was only used by Swift, but as of 14dc790137 we just do the same from Go) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	38dc6fe758	cmd/tailscaled, wgengine: remove --fake, replace with netstack ... And add a --socks5-server flag. And fix a race in SOCKS5 replies where the response header was written concurrently with the copy from the backend. Co-authored with Naman Sood. Updates #707 Updates #504 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	34188d93d4	wgengine/monitor: start moving interface state accessor into monitor ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	a55a03d5ff	wgengine: let LinkMonitor be passed in to NewUserspaceEngine ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ee6475a44d	wgengine: unify NewUserspaceEngine, NewUserspaceEngineAdvanced ... Also rename EngineConfig to Config to avoid wgengine.EngineConfig stutter. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	dda03a911e	wgengine/monitor: change API to permit multiple independent callbakcks ... Currently it assumes exactly 1 registered callback. This changes it to support 0, 1, or more than 1. This is a step towards plumbing wgengine/monitor into more places (and moving some of wgengine's interface state fetching into monitor in a later step) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	0eea490724	wgengine: also close link monitor on NewUserspaceEngineAdvanced error ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Naman Sood	517c90d7e5	wgengine, cmd/tailscaled: refactor netstack, forward TCP to hello as demo (#1301) ... Updates #707 Updates #504 Signed-off-by: Naman Sood <mail@nsood.in>	4 years ago
Aleksandar Pesic	daf6de4f14	wgengine: make NewUserspaceEngine wait for TUN interface to be up on Windows ... Updates #474 Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>	4 years ago
Brad Fitzpatrick	188bb14269	wgengine: consistently close things when NewUserspaceEngineAdvanced errors ... Fixes #1363 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	fd8e070d01	health, control/controlclient, wgengine: report when router unhealthy ... Updates tailscale/corp#1338 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	bbb4631e04	safesocket, wgengine: add some darwin failure diagnostic hints	4 years ago
Josh Bleecher Snyder	e7caad61fb	wgengine: remove IpcGetOperation filter ... This was in place because retrieved allowed_ips was very expensive. Upstream changed the data structure to make them cheaper to compute. This commit is an experiment to find out whether they're now cheap enough. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	1e7a35b225	types/netmap: split controlclient.NetworkMap off into its own leaf package ... Updates #1278 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	aa6856a9eb	wgengine: adapt to wireguard-go changes ... Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	d76334d2f0	ipn: split LocalBackend off into new ipn/ipnlocal package ... And move a couple other types down into leafier packages. Now cmd/tailscale doesn't bring in netlink, magicsock, wgengine, etc. Fixes #1181 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	fe7c3e9c17	all: move wgcfg from wireguard-go ... This is mostly code movement from the wireguard-go repo. Most of the new wgcfg package corresponds to the wireguard-go wgcfg package. wgengine/wgcfg/device{_test}.go was device/config{_test}.go. There were substantive but simple changes to device_test.go to remove internal package device references. The API of device.Config (now wgcfg.DeviceConfig) grew an error return; we previously logged the error and threw it away. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	4d943536f1	wgengine: don't leak TUN device in NewUserspaceEngine error path ... Updates #1187 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	9f5b0d058f	wgengine: fix bugs from earlier fix ... Fixes a regression from e970ed0995 that wasn't covered by tests in this repo. (Our end-to-end tests in another repo caught this.) Updates #1204	4 years ago
Brad Fitzpatrick	e970ed0995	wgengine: fix crash reading long UAPI lines from legacy peers ... Also don't log.Fatalf in a function returning an error. Fixes #1204 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	d5baeeed5c	wgengine: use Tailscale-style peer identifiers in logs ... Rewrite log lines on the fly, based on the set of known peers. This enables us to use upstream wireguard-go logging, but maintain the Tailscale-style peer public key identifiers that the rest of our systems (and people) expect. Fixes #1183 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	9936cffc1a	wgengine: correctly track all node IPs in lazy config. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	3ad7c2133a	wgengine/userspace: make wireguard-go log silencing include peer routines ... Also suppress log lines like: peer(Kksd…ySmc) - Routine: sequential sender - stopped Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Naman Sood	420c7a35e2	wgengine/netstack: use tailscale IPs instead of a hardcoded one (#1131) ... Signed-off-by: Naman Sood <mail@nsood.in>	4 years ago
Josh Bleecher Snyder	654b5f1570	all: convert from []wgcfg.Endpoint to string ... This eliminates a dependency on wgcfg.Endpoint, as part of the effort to eliminate our wireguard-go fork. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	020084e84d	wgengine: adapt to removal of wgcfg.Key in wireguard-go	4 years ago
Brad Fitzpatrick	85e54af0d7	wgengine: on TCP connect fail/timeout, log some clues about why it failed ... So users can see why things aren't working. A start. More diagnostics coming. Updates #1094	4 years ago
Brad Fitzpatrick	5aa5db89d6	cmd/tailscaled, wgengine/netstack: add start of gvisor userspace netstack work ... Not usefully functional yet (mostly a proof of concept), but getting it submitted for some work @namansood is going to do atop this. Updates #707 Updates #634 Updates #48 Updates #835	4 years ago
Josh Bleecher Snyder	1e4604f60e	wgengine: quiet some wireguard-go logging ... The log lines that wireguard-go prints as it starts and stops its worker routines are mostly noise. They also happen after other work is completed, which causes failures in some of the log testing packages. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	56a7652dc9	wgkey: new package ... This is a replacement for the key-related parts of the wireguard-go wgcfg package. This is almost a straight copy/paste from the wgcfg package. I have slightly changed some of the exported functions and types to avoid stutter, added and tweaked some comments, and removed some now-unused code. To avoid having wireguard-go depend on this new package, wgcfg will keep its key types. We translate into and out of those types at the last minute. These few remaining uses will be eliminated alongside the rest of the wgcfg package. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	2fe770ed72	all: replace wgcfg.IP and wgcfg.CIDR with netaddr types ... Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	80c94168ae	wgengine: finish updating isTrimmablePeer ... I accidentally merged Dave's change with the XXXX DO NOT SUBMIT comment in it.	4 years ago
David Anderson	cb96b14bf4	net/packet: remove the custom IP4/IP6 types in favor of netaddr.IP. ... Upstream netaddr has a change that makes it alloc-free, so it's safe to use in hot codepaths. This gets rid of one of the many IP types in our codebase. Performance is currently worse across the board. This is likely due in part to netaddr.IP being a larger value type (4b -> 24b for IPv4, 16b -> 24b for IPv6), and in other part due to missing low-hanging fruit optimizations in netaddr. However, the regression is less bad than it looks at first glance, because we'd micro-optimized packet.IP* in the past few weeks. This change drops us back to roughly where we were at the 1.2 release, but with the benefit of a significant code and architectural simplification. name old time/op new time/op delta pkg:tailscale.com/net/packet goos:linux goarch:amd64 Decode/tcp4-8 12.2ns ± 5% 29.7ns ± 2% +142.32% (p=0.008 n=5+5) Decode/tcp6-8 12.6ns ± 3% 65.1ns ± 2% +418.47% (p=0.008 n=5+5) Decode/udp4-8 11.8ns ± 3% 30.5ns ± 2% +157.94% (p=0.008 n=5+5) Decode/udp6-8 27.1ns ± 1% 65.7ns ± 2% +142.36% (p=0.016 n=4+5) Decode/icmp4-8 24.6ns ± 2% 30.5ns ± 2% +23.65% (p=0.016 n=4+5) Decode/icmp6-8 22.9ns ±51% 65.5ns ± 2% +186.19% (p=0.008 n=5+5) Decode/igmp-8 18.1ns ±44% 30.2ns ± 1% +66.89% (p=0.008 n=5+5) Decode/unknown-8 20.8ns ± 1% 10.6ns ± 9% -49.11% (p=0.016 n=4+5) pkg:tailscale.com/wgengine/filter goos:linux goarch:amd64 Filter/icmp4-8 30.5ns ± 1% 77.9ns ± 3% +155.01% (p=0.008 n=5+5) Filter/tcp4_syn_in-8 43.7ns ± 3% 123.0ns ± 3% +181.72% (p=0.008 n=5+5) Filter/tcp4_syn_out-8 24.5ns ± 2% 45.7ns ± 6% +86.22% (p=0.008 n=5+5) Filter/udp4_in-8 64.8ns ± 1% 210.0ns ± 2% +223.87% (p=0.008 n=5+5) Filter/udp4_out-8 119ns ± 0% 278ns ± 0% +133.78% (p=0.016 n=4+5) Filter/icmp6-8 40.3ns ± 2% 204.4ns ± 4% +407.70% (p=0.008 n=5+5) Filter/tcp6_syn_in-8 35.3ns ± 3% 199.2ns ± 2% +464.95% (p=0.008 n=5+5) Filter/tcp6_syn_out-8 32.8ns ± 2% 81.0ns ± 2% +147.10% (p=0.008 n=5+5) Filter/udp6_in-8 106ns ± 2% 290ns ± 2% +174.48% (p=0.008 n=5+5) Filter/udp6_out-8 184ns ± 2% 314ns ± 3% +70.43% (p=0.016 n=4+5) pkg:tailscale.com/wgengine/tstun goos:linux goarch:amd64 Write-8 9.02ns ± 3% 8.92ns ± 1% ~ (p=0.421 n=5+5) name old alloc/op new alloc/op delta pkg:tailscale.com/net/packet goos:linux goarch:amd64 Decode/tcp4-8 0.00B 0.00B ~ (all equal) Decode/tcp6-8 0.00B 0.00B ~ (all equal) Decode/udp4-8 0.00B 0.00B ~ (all equal) Decode/udp6-8 0.00B 0.00B ~ (all equal) Decode/icmp4-8 0.00B 0.00B ~ (all equal) Decode/icmp6-8 0.00B 0.00B ~ (all equal) Decode/igmp-8 0.00B 0.00B ~ (all equal) Decode/unknown-8 0.00B 0.00B ~ (all equal) pkg:tailscale.com/wgengine/filter goos:linux goarch:amd64 Filter/icmp4-8 0.00B 0.00B ~ (all equal) Filter/tcp4_syn_in-8 0.00B 0.00B ~ (all equal) Filter/tcp4_syn_out-8 0.00B 0.00B ~ (all equal) Filter/udp4_in-8 0.00B 0.00B ~ (all equal) Filter/udp4_out-8 16.0B ± 0% 64.0B ± 0% +300.00% (p=0.008 n=5+5) Filter/icmp6-8 0.00B 0.00B ~ (all equal) Filter/tcp6_syn_in-8 0.00B 0.00B ~ (all equal) Filter/tcp6_syn_out-8 0.00B 0.00B ~ (all equal) Filter/udp6_in-8 0.00B 0.00B ~ (all equal) Filter/udp6_out-8 48.0B ± 0% 64.0B ± 0% +33.33% (p=0.008 n=5+5) name old allocs/op new allocs/op delta pkg:tailscale.com/net/packet goos:linux goarch:amd64 Decode/tcp4-8 0.00 0.00 ~ (all equal) Decode/tcp6-8 0.00 0.00 ~ (all equal) Decode/udp4-8 0.00 0.00 ~ (all equal) Decode/udp6-8 0.00 0.00 ~ (all equal) Decode/icmp4-8 0.00 0.00 ~ (all equal) Decode/icmp6-8 0.00 0.00 ~ (all equal) Decode/igmp-8 0.00 0.00 ~ (all equal) Decode/unknown-8 0.00 0.00 ~ (all equal) pkg:tailscale.com/wgengine/filter goos:linux goarch:amd64 Filter/icmp4-8 0.00 0.00 ~ (all equal) Filter/tcp4_syn_in-8 0.00 0.00 ~ (all equal) Filter/tcp4_syn_out-8 0.00 0.00 ~ (all equal) Filter/udp4_in-8 0.00 0.00 ~ (all equal) Filter/udp4_out-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) Filter/icmp6-8 0.00 0.00 ~ (all equal) Filter/tcp6_syn_in-8 0.00 0.00 ~ (all equal) Filter/tcp6_syn_out-8 0.00 0.00 ~ (all equal) Filter/udp6_in-8 0.00 0.00 ~ (all equal) Filter/udp6_out-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	053a1d1340	all: annotate log verbosity levels on most egregiously spammy log prints ... Fixes #924 Fixes #282 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	891110e64c	wgengine: expand lazy config to work with dual-stacked peers. ... Lazy wg configuration now triggers if a peer has only endpoint addresses (/32 for IPv4, /128 for IPv6). Subnet routers still trigger eager configuration to avoid the need for a CIDR match in the hot packet path. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	be6fe393c5	wgengine: don't try pinging IPv6 addresses in legacy pinger. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	d9e2edb5ae	wgengine: reconfigure wireguard peer in two steps when its disco key changes ... First remove the device (to clear its wireguard session key), and then add it back. Fixes #929 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	19b0cfe89e	all: prepare for GOOS=ios in Go 1.16 ... Work with either way for now on iOS (darwin/arm64 vs ios/arm64). In February when Go 1.16 comes out we'll have a universal binary for darwin/arm64 (macOS) and will drop support for Go 1.15 and its darwin/amd64 meaning iOS. (it'll mean macOS). Context: * https://tip.golang.org/doc/go1.16#darwin * https://github.com/golang/go/issues/38485 * https://github.com/golang/go/issues/42100	4 years ago
David Anderson	c2cc3acbaf	net/packet: remove NewIP, offer only a netaddr constructor. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	55b1221db2	net/packet: support full IPv6 decoding. ... The packet filter still rejects all IPv6, but decodes enough from v6 packets to do something smarter in a followup. name time/op Decode/tcp4-8 28.8ns ± 2% Decode/tcp6-8 20.6ns ± 1% Decode/udp4-8 28.2ns ± 1% Decode/udp6-8 20.0ns ± 6% Decode/icmp4-8 21.7ns ± 2% Decode/icmp6-8 14.1ns ± 2% Decode/unknown-8 9.43ns ± 2% Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	89894c6930	net/packet: add IPv6 source and destination IPs to Parsed. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	093431f5dd	net/packet: s/ParsedPacket/Parsed/ to avoid package stuttering. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	427bf2134f	net/packet: rename from wgengine/packet. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	19df6a2ee2	wgengine/packet: rename types to reflect their v4-only-ness, document. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	746f03669c	wgengine: fix lazy wireguard config bug when disco keys change ... There was a bug with the lazy wireguard config code where, if the minimum set of peers to tell wireguard didn't change, we skipped calling userspaceEngine.updateActivityMapsLocked which updated the various data structures that matched incoming traffic to later reconfigure the minimum config. That meant if an idle peer restarted and changed discovery keys, we skipped updating our maps of disco keys/IPs that would caused us to lazily inflate the config for that peer later if/when it did send traffic.	4 years ago
Avery Pennarun	0e5f2b90a5	echoRespondToAll: filter.Accept rather than filter.Drop on a match. ... This function is only called in fake mode, which won't do anything more with the packet after we respond to it anyway, so dropping it in the prefilter is not necessary. And it's kinda semantically wrong: we did not reject it, so telling the upper layer that it was rejected produces an ugly error message. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Brad Fitzpatrick	6ee219a25d	ipn, wgengine, magicsock, tsdns: be quieter and less aggressive when offline ... If no interfaces are up, calm down and stop spamming so much. It was noticed as especially bad on Windows, but probably was bad everywhere. I just have the best network conditions testing on a Windows VM. Updates #604	4 years ago
Brad Fitzpatrick	587bdc4280	ipn, wgengine: disable subnet routes if network has PAC configuration ... Not configurable yet. Updates tailscale/corp#653 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c86761cfd1	Remove tuntap references. We only use TUN.	4 years ago
Brad Fitzpatrick	2d0ed99672	wgengine, wgengine/router: add a bunch of (temporary?) engine creation logging ... Trying to debug what's slow on a user's machine. Updates #785	4 years ago
David Anderson	b7e0ff598a	wgengine: don't close tundev in NewUserspaceEngine. ... newUserspaceEngineAdvanced closes the tun device on error already. Fixes #783. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	5d8b88be88	control/controlclient, version/distro, wgengine: recognize OpenWrt ... And help out with missing packages. Thanks to @willangley for tips. Updates #724	4 years ago
Brad Fitzpatrick	5bcac4eaac	net/tshttpproxy: add GetProxyForURL negative cache ... Otherwise when PAC server is down, we log, and each log entry is a new HTTP request (from logtail) and a new GetProxyForURL call, which again logs, non-stop. This is also nicer to the WinHTTP service. Then also hook up link change notifications to the cache to reset it if there's a chance the network might work sooner.	4 years ago
Brad Fitzpatrick	afb2be71de	wgengine: add two missing TUN close calls	4 years ago
Brad Fitzpatrick	a084c44afc	wgengine, wgengine/router, cmd/tailscale: force netfilter mode off on Synology ... For now. Get it working again so it's not stuck on 0.98. Subnet relay can come later. Updates #451 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	9b07517f18	wgengine: add Engine.SetLinkChangeCallback ... Start of making the IPN state machine react to link changes and down its DNS & routes if necessary to unblock proxy resolution (e.g. for transitioning from public to corp networks where the corp network has mandatory proxies and WPAD PAC files that can't be resolved while using the DNS/routes configured previously) This change should be a no-op. Just some callback plumbing.	4 years ago
Brad Fitzpatrick	756d6a72bd	wgengine: lazily create peer wireguard configs more explicitly ... Rather than consider bigs jumps in last-received-from activity as a signal to possibly reconfigure the set of wireguard peers to have configured, instead just track the set of peers that are currently excluded from the configuration. Easier to reason about. Also adds a bit more logging. This might fix an error we saw on a machine running a recent unstable build: 2020-08-26 17:54:11.528033751 +0000 UTC: 8.6M/92.6M magicsock: [unexpected] lazy endpoint not created for [UcppE], d:42a770f678357249 2020-08-26 17:54:13.691305296 +0000 UTC: 8.7M/92.6M magicsock: DERP packet received from idle peer [UcppE]; created=false 2020-08-26 17:54:13.691383687 +0000 UTC: 8.7M/92.6M magicsock: DERP packet from unknown key: [UcppE] If it does happen again, though, we'll have more logs.	4 years ago
David Crawshaw	dd2c61a519	magicsock: call RequestStatus when DERP connects ... Second attempt. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
David Crawshaw	a67b174da1	Revert "magicsock: call RequestStatus when DERP connects" ... Seems to break linux CI builder. Cannot reproduce locally, so attempting a rollback. This reverts commit cd7bc02ab1. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago