88 Commits (38a1cf748a9920aa2cb49101730bba06db1fd839)

Author	SHA1	Message	Date
Andrew Lytvynov	1302bd1181	all: cleanup unused code, part 1 (#10661) ... Run `staticcheck` with `U1000` to find unused code. This cleans up about a half of it. I'll do the other half separately to keep PRs manageable. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Brad Fitzpatrick	4af22f3785	util/deephash: add IncludeFields, ExcludeFields HasherForType Options ... Updates tailscale/corp#6198 Change-Id: Iafc18c5b947522cf07a42a56f35c0319cc7b1c94 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	f35ff84ee2	util/deephash: relax an annoyingly needy test ... I'd added a test case of deephash against a tailcfg.Node to make sure it worked at all more than anything. We don't care what the exact bytes are in this test, just that it doesn't fail. So adjust for that. Then when we make changes to tailcfg.Node and types under it, we don't need to keep adjusting this test. Updates #cleanup Change-Id: Ibf4fa42820aeab8f5292fe65f9f92ffdb0b4407b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	66f27c4beb	all: require Go 1.21 ... Updates #8419 Change-Id: I809b6a4d59d92a2ab6ec587ccbb9053376bf02c2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	1ecc16da5f	tailcfg,ipn/ipnlocal,wgengine: add values to PeerCapabilities ... Define PeerCapabilty and PeerCapMap as the new way of sending down inter-peer capability information. Previously, this was unstructured and you could only send down strings which got too limiting for certain usecases. Instead add the ability to send down raw JSON messages that are opaque to Tailscale but provide the applications to define them however they wish. Also update accessors to use the new values. Updates #4217 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	7b1c3dfd28	tailcfg,etc: remove unused tailcfg.Node.KeepAlive field ... The server hasn't sent it in ages. Updates #cleanup Change-Id: I9695ab0f074ec6fb006e11faf3cdfc5ca049fbf8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	c11af12a49	.github: actually run tests in CI ... Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	64bbf1738e	tailcfg: make SelfNodeV4MasqAddrForThisPeer a pointer ... This makes `omitempty` actually work, and saves bytes in each map response. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	c573bef0aa	tailcfg,wgengine: add initial support for WireGuard only peers ... A peer can have IsWireGuardOnly, which means it will not support DERP or Disco, and it must have Endpoints filled in order to be usable. In the present implementation only the first Endpoint will be used as the bestAddr. Updates tailscale/corp#10351 Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com> Co-authored-by: James Tucker <james@tailscale.com> Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Maisem Ali	f61b306133	tailcfg: add Node.SelfNodeV4MasqAddrForThisPeer ... This only adds the field, to be used in a future commit. Updates tailscale/corp#8020 Co-authored-by: Melanie Warrick <warrick@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	b1248442c3	all: update to Go 1.20, use strings.CutPrefix/Suffix instead of our fork ... Updates #7123 Updates #5309 Change-Id: I90bcd87a2fb85a91834a0dd4be6e03db08438672 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers ... This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Brad Fitzpatrick	6edf357b96	all: start groundwork for using capver for localapi & peerapi ... Updates #7015 Change-Id: I3d4c11b42a727a62eaac3262a879f29bb4ce82dd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	1e67947cfa	control/controlclient, tailcfg: add Node.Expired field, set for expired nodes ... Nodes that are expired, taking into account the time delta calculated from MapResponse.ControlTime have the newly-added Expired boolean set. For additional defense-in-depth, also replicate what control does and clear the Endpoints and DERP fields, and additionally set the node key to a bogus value. Updates #6932 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ia2bd6b56064416feee28aef5699ca7090940662a	2 years ago
Brad Fitzpatrick	197a4f1ae8	types/ptr: move all the ptrTo funcs to one new package's ptr.To ... Change-Id: Ia0b820ffe7aa72897515f19bd415204b6fe743c7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	e55ae53169	tailcfg: add Node.UnsignedPeerAPIOnly to let server mark node as peerapi-only ... capver 48 Change-Id: I20b2fa81d61ef8cc8a84e5f2afeefb68832bd904 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes ... Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Andrew Dunham	4b996ad5e3	util/deephash: add AppendSum method (#5768) ... This method can be used to obtain the hex-formatted deephash.Sum instance without allocations. Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Aaron Klotz	acc7baac6d	tailcfg, util/deephash: add DataPlaneAuditLogID to Node and DomainDataPlaneAuditLogID to MapResponse ... We're adding two log IDs to facilitate data-plane audit logging: a node-specific log ID, and a domain-specific log ID. Updated util/deephash/deephash_test.go with revised expectations for tailcfg.Node. Updates https://github.com/tailscale/corp/issues/6991 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	2 years ago
Joe Tsai	7e40071571	util/deephash: handle slice edge-cases (#5471) ... It is unclear whether the lack of checking nil-ness of slices was an oversight or a deliberate feature. Lacking a comment, the assumption is that this was an oversight. Also, expand the logic to perform cycle detection for recursive slices. We do this on a per-element basis since a slice is semantically equivalent to a list of pointers. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	9bf13fc3d1	util/deephash: remove getTypeInfo (#5469) ... Add a new lookupTypeHasher function that is just a cached front-end around the makeTypeHasher function. We do not need to worry about the recursive type cycle issue that made getTypeInfo more complicated since makeTypeHasher is not directly recursive. All calls to itself happen lazily through a sync.Once upon first use. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	ab7e6f3f11	util/deephash: require pointer in API (#5467) ... The entry logic of Hash has extra complexity to make sure we always have an addressable value on hand. If not, we heap allocate the input. For this reason we document that there are performance benefits to always providing a pointer. Rather than documenting this, just enforce it through generics. Also, delete the unused HasherForType function. It's an interesting use of generics, but not well tested. We can resurrect it from code history if there's a need for it. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	c5b1565337	util/deephash: move pointer and interface logic to separate function (#5465) ... This helps pprof better identify which Go kinds take the most time since the kind is always in the function name. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	d2e2d8438b	util/deephash: move map logic to separate function (#5464) ... This helps pprof better identify which Go kinds take the most time since the kind is always in the function name. There is a minor adjustment where we hash the length of the map to be more on the cautious side. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	23c3831ff9	util/deephash: coalesce struct logic (#5466) ... Rather than having two copies []fieldInfo, just maintain one and perform merging in the same pass. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	296b008b9f	util/deephash: move array and slice logic to separate function (#5463) ... This helps pprof better identify which Go kinds take the most time since the kind is always in the function name. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	31bf3874d6	util/deephash: use unsafe.Pointer instead of reflect.Value (#5459) ... Use of reflect.Value.SetXXX panics if the provided argument was obtained from an unexported struct field. Instead, pass an unsafe.Pointer around and convert to a reflect.Value when necessary (i.e., for maps and interfaces). Converting from unsafe.Pointer to reflect.Value guarantees that none of the read-only bits will be populated. When running in race mode, we attach type information to the pointer so that we can type check every pointer operation. This also type-checks that direct memory hashing is within the valid range of a struct value. We add test cases that previously caused deephash to panic, but now pass. Performance: name old time/op new time/op delta Hash 14.1µs ± 1% 14.1µs ± 1% ~ (p=0.590 n=10+9) HashPacketFilter 2.53µs ± 2% 2.44µs ± 1% -3.79% (p=0.000 n=9+10) TailcfgNode 1.45µs ± 1% 1.43µs ± 0% -1.36% (p=0.000 n=9+9) HashArray 318ns ± 2% 318ns ± 2% ~ (p=0.541 n=10+10) HashMapAcyclic 32.9µs ± 1% 31.6µs ± 1% -4.16% (p=0.000 n=10+9) There is a slight performance gain due to the use of unsafe.Pointer over reflect.Value methods. Also, passing an unsafe.Pointer (1 word) on the stack is cheaper than passing a reflect.Value (3 words). Performance gains are diminishing since SHA-256 hashing now dominates the runtime. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	e0c5ac1f02	util/deephash: add debug printer (#5460) ... When built with "deephash_debug", print the set of HashXXX methods. Example usage: $ go test -run=GetTypeHasher/string_slice -tags=deephash_debug U64(2)+U64(3)+S("foo")+U64(3)+S("bar")+FIN Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	70f9fc8c7a	util/deephash: rely on direct memory hashing for primitive kinds (#5457) ... Rather than separate functions to hash each kind, just rely on the fact that these are direct memory hashable, thus simplifying the code. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	531ccca648	util/deephash: delete slow path (#5423) ... Every implementation of typeHasherFunc always returns true, which implies that the slow path is no longer executed. Delete it. h.hashValueWithType(v, ti, ...) is deleted as it is equivalent to: ti.hasher()(h, v) h.hashValue(v, ...) is deleted as it is equivalent to: ti := getTypeInfo(v.Type()) ti.hasher()(h, v) Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	3fc8683585	util/deephash: expand fast-path capabilities (#5404) ... Add support for maps and interfaces to the fast path. Add cycle-detection to the pointer handling logic. This logic is mostly copied from the slow path. A future commit will delete the slow path once the fast path never falls back to the slow path. Performance: name old time/op new time/op delta Hash-24 18.5µs ± 1% 14.9µs ± 2% -19.52% (p=0.000 n=10+10) HashPacketFilter-24 2.54µs ± 1% 2.60µs ± 1% +2.19% (p=0.000 n=10+10) HashMapAcyclic-24 31.6µs ± 1% 30.5µs ± 1% -3.42% (p=0.000 n=9+8) TailcfgNode-24 1.44µs ± 2% 1.43µs ± 1% ~ (p=0.171 n=10+10) HashArray-24 324ns ± 1% 324ns ± 2% ~ (p=0.425 n=9+9) The additional cycle detection logic doesn't incur much slow down since it only activates if a type is recursive, which does not apply for any of the types that we care about. There is a notable performance boost since we switch from the fath path to the slow path less often. Most notably, a struct with a field that could not be handled by the fast path would previously cause the entire struct to go through the slow path. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Tom DNetto	18edd79421	control/controlclient,tailcfg: [capver 40] create KeySignature field in tailcfg.Node ... We calve out a space to put the node-key signature (used on tailnets where network lock is enabled). Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Joe Tsai	d32700c7b2	util/deephash: specialize for netip.Addr and drop AppendTo support (#5402) ... There are 5 types that we care about that implement AppendTo: key.DiscoPublic key.NodePublic netip.Prefix netipx.IPRange netip.Addr The key types are thin wrappers around [32]byte and are memory hashable. The netip.Prefix and netipx.IPRange types are thin wrappers over netip.Addr and are hashable by default if netip.Addr is hashable. The netip.Addr type is the only one with a complex structure where the default behavior of deephash does not hash it correctly due to the presence of the intern.Value type. Drop support for AppendTo and instead add specialized hashing for netip.Addr that would be semantically equivalent to == on the netip.Addr values. The AppendTo support was already broken prior to this change. It was fully removed (intentionally or not) in #4870. It was partially restored in #4858 for the fast path, but still broken in the slow path. Just drop support for it altogether. This does mean we lack any ability for types to self-hash themselves. In the future we can add support for types that implement: interface { DeepHash() Sum } Test and fuzz cases were added for the relevant types that used to rely on the AppendTo method. FuzzAddr has been executed on 1 billion samples without issues. Signed-off-by: Joe Tsai joetsai@digital-static.net	2 years ago
Joe Tsai	03f7e4e577	util/hashx: move from sha256x (#5388)	2 years ago
Joe Tsai	f061d20c9d	util/sha256x: rename Hash as Block512 (#5351) ... Rename Hash as Block512 to indicate that this is a general-purpose hash.Hash for any algorithm that operates on 512-bit block sizes. While we rename the package as hashx in this commit, a subsequent commit will move the sha256x package to hashx. This is done separately to avoid confusing git. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	44d62b65d0	util/deephash: move typeIsRecursive and canMemHash to types.go (#5386) ... Also, rename canMemHash to typeIsMemHashable to be consistent. There are zero changes to the semantics. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	d53eb6fa11	util/deephash: simplify typeIsRecursive (#5385) ... Any type that is memory hashable must not be recursive since there are definitely no pointers involved to make a cycle. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	23ec3c104a	util/deephash: remove unused stack slice in typeIsRecursive (#5363) ... No operation ever reads from this variable. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	c200229f9e	util/deephash: simplify canMemHash (#5384) ... Put the t.Size() == 0 check first since this is applicable in all cases. Drop the last struct field conditional since this is covered by the sumFieldSize check at the end. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	32a1a3d1c0	util/deephash: avoid variadic argument for Update (#5372) ... Hashing []any is slow since hashing of interfaces is slow. Hashing of interfaces is slow since we pessimistically assume that cycles can occur through them and start cycle tracking. Drop the variadic signature of Update and fix callers to pass in an anonymous struct so that we are hashing concrete types near the root of the value tree. Signed-off-by: Joe Tsai <joetsai@digital-static.net> Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	548fa63e49	util/deephash: use binary encoding of time.Time (#5352) ... Formatting a time.Time as RFC3339 is slow. See https://go.dev/issue/54093 Now that we have efficient hashing of fixed-width integers, just hash the time.Time as a binary value. Performance: Hash-24 19.0µs ± 1% 18.6µs ± 1% -2.03% (p=0.000 n=10+9) TailcfgNode-24 1.79µs ± 1% 1.40µs ± 1% -21.74% (p=0.000 n=10+9) Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	1f7479466e	util/deephash: use sha256x (#5339) ... Switch deephash to use sha256x.Hash. We add sha256x.HashString to efficiently hash a string. It uses unsafe under the hood to convert a string to a []byte. We also modify sha256x.Hash to export the underlying hash.Hash for testing purposes so that we can intercept all hash.Hash calls. Performance: name old time/op new time/op delta Hash-24 19.8µs ± 1% 19.2µs ± 1% -3.01% (p=0.000 n=10+10) HashPacketFilter-24 2.61µs ± 0% 2.53µs ± 1% -3.01% (p=0.000 n=8+10) HashMapAcyclic-24 31.3µs ± 1% 29.8µs ± 0% -4.80% (p=0.000 n=10+9) TailcfgNode-24 1.83µs ± 1% 1.82µs ± 2% ~ (p=0.305 n=10+10) HashArray-24 344ns ± 2% 323ns ± 1% -6.02% (p=0.000 n=9+10) The performance gains is not as dramatic as sha256x over sha256 due to: 1. most of the hashing already occurring through the direct memory hashing logic, and 2. what does not go through direct memory hashing is slowed down by reflect. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	77a92f326d	util/deephash: avoid using sync.Pool for reflect.MapIter (#5333) ... In Go 1.19, the reflect.Value.MapRange method uses "function outlining" so that the allocation of reflect.MapIter is inlinable by the caller. If the iterator doesn't escape the caller, it can be stack allocated. See https://go.dev/cl/400675 Performance: name old time/op new time/op delta HashMapAcyclic-24 31.9µs ± 2% 32.1µs ± 1% ~ (p=0.075 n=10+10) name old alloc/op new alloc/op delta HashMapAcyclic-24 0.00B 0.00B ~ (all equal) Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	539c5e44c5	util/deephash: always keep values addressable (#5328) ... The logic of deephash is both simpler and easier to reason about if values are always addressable. In Go, the composite kinds are slices, arrays, maps, structs, interfaces, pointers, channels, and functions, where we define "composite" as a Go value that encapsulates some other Go value (e.g., a map is a collection of key-value entries). In the cases of pointers and slices, the sub-values are always addressable. In the cases of arrays and structs, the sub-values are always addressable if and only if the parent value is addressable. In the case of maps and interfaces, the sub-values are never addressable. To make them addressable, we need to copy them onto the heap. For the purposes of deephash, we do not care about channels and functions. For all non-composite kinds (e.g., strings and ints), they are only addressable if obtained from one of the composite kinds that produce addressable values (i.e., pointers, slices, addressable arrays, and addressable structs). A non-addressible, non-composite kind can be made addressable by allocating it on the heap, obtaining a pointer to it, and dereferencing it. Thus, if we can ensure that values are addressable at the entry points, and shallow copy sub-values whenever we encounter an interface or map, then we can ensure that all values are always addressable and assume such property throughout all the logic. Performance: name old time/op new time/op delta Hash-24 21.5µs ± 1% 19.7µs ± 1% -8.29% (p=0.000 n=9+9) HashPacketFilter-24 2.61µs ± 1% 2.62µs ± 0% +0.29% (p=0.037 n=10+9) HashMapAcyclic-24 30.8µs ± 1% 30.9µs ± 1% ~ (p=0.400 n=9+10) TailcfgNode-24 1.84µs ± 1% 1.84µs ± 2% ~ (p=0.928 n=10+10) HashArray-24 324ns ± 2% 332ns ± 2% +2.45% (p=0.000 n=10+10) Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Brad Fitzpatrick	8725b14056	all: migrate more code code to net/netip directly ... Instead of going through the tailscale.com/net/netaddr transitional wrappers. Updates #5162 Change-Id: I3dafd1c2effa1a6caa9b7151ecf6edd1a3fda3dd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	116f55ff66	all: gofmt for Go 1.19 ... Updates #5210 Change-Id: Ib02cd5e43d0a8db60c1f09755a8ac7b140b670be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	04cf46a762	util/deephash: fix unexported time.Time hashing ... Updates tailscale/corp#6311 Change-Id: I33cd7e4040966261c2f2eb3d32f29936aeb7f632 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly ... perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly ... Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package ... Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago