tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	0a842f353c	ipn/ipnserver: move more connection acceptance logic to LocalBackend Follow-up to #6467 and #6506. LocalBackend knows the server-mode state, so move more auth checking there, removing some bookkeeping from ipnserver.Server. Updates #6417 Updates tailscale/corp#8051 Change-Id: Ic5d14a077bf0dccc92a3621bd2646bab2cc5b837 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	5ea7c7d603	ipn/{ipnlocal,ipnserver}: add some comments Change-Id: Ieb5917edaf572342b755caa458693512c7aece81 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	d321b0ea4f	ipn/ipnlocal: add docs to LocalBackend.SetCurrentUserID Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	20b27df4d0	tailcfg, ipn, controlclient: add MapResponse.ClientVersion, plumb to IPN bus Updates #6480 Change-Id: I6321071425cd091148d8140d1eb24dd536bb7984 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	3a5d02cb31	ipn/ipnlocal: update comment about using FallbackResolvers for exit nodes While reading the DNS code noticed that we were still using FallbackResolvers in this code path but the comment was out of date. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	300aba61a6	ipn, cmd/tailscale/cli: add LocalAPI IPN bus watch, Start, convert CLI Updates #6417 Updates tailscale/corp#8051 Change-Id: I1ca360730c45ffaa0261d8422877304277fc5625 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	b45b948776	ipn/ipnlocal: call initTKALocked on backend start Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Brad Fitzpatrick	0f7da5c7dc	ipn{,/ipnlocal}, client/tailscale: move Taildrop recv notifications to LocalAPI HTTP method Updates #6417 Change-Id: Iec544c477a0e5e9f1c6bf23555afec06255e2e22 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	8d84178884	ipn/ipnlocal: stop storing serverURL in LocalBackend It's only read in a couple of places and we can read from Prefs directly. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	18c7c3981a	ipn/ipnlocal: call checkPrefs in Start too We were not calling checkPrefs on `opts.Prefs` in (LocalBackend).Start(). Updates #713 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	b94b91c168	cmd/tailscale/cli: add ability to set short names for profiles This adds a `--nickname` flag to `tailscale login\|set`. Updates #713 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	039ea51ca6	ipn/ipnlocal: add health warning for unstable builds Like the macOS About dialog. Change-Id: Ic27f091e66e29d5eebe4e195eda97ed331d748fd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a26f23d949	ipn/ipnlocal: actually fill out PeerAPIURLs in PeerStatus The earlier `5f6d63936f` was not complete. Updates tailscale/corp#7515 Change-Id: I35efca51d1584c48ef6834a7d29cd42d7c943628 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	f1ad26f694	ipn/ipnlocal: strip NetworkLockKey from Prefs Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	dd50dcd067	ipn/ipnlocal: handle untagging nodes better We would end up with duplicate profiles for the node as the UserID would have chnaged. In order to correctly deduplicate profiles, we need to look at both the UserID and the NodeID. A single machine can only ever have 1 profile per NodeID and 1 profile per UserID. Note: UserID of a Node can change when the node is tagged/untagged, and the NodeID of a device can change when the node is deleted so we need to check for both. Updates #713 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
shayne	a97369f097	cmd/tailscale/cli: flesh out serve CLI and tests (#6304 ) Signed-off-by: Shayne Sweeney <shayne@tailscale.com>	2 years ago
Maisem Ali	5f6d63936f	ipn/ipnlocal: fill out PeerAPIURLs in PeerStatus Updates tailscale/corp#7515 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	1de64e89cd	ipn/ipnlocal: set Hostinfo.WireIngress when ingress enabled Optimization for control. Updates tailscale/corp#7515 Change-Id: Ie93b232ab3e543d53062b462bdc13e279176f7a9 Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	b0736fe6f7	ipn/ipnlocal: move selfNode from peerAPIServer to peerAPIHandler The peerAPIHandler is instantiated per PeerAPI call so it is guaranteed to have the latest selfNode. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	e9c851b04b	ipn/ipnlocal: also accept service IP IPv6 literal in brackets for quad100 The fix in `4fc8538e2` was sufficient for IPv6. Browsers (can?) send the IPv6 literal, even without a port number, in brackets. Updates tailscale/corp#7948 Change-Id: I0e429d3de4df8429152c12f251ab140b0c8f6b77 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	22238d897b	all: standardize on PeerAPI Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	1b56acf513	ipn/ipnlocal: move LocalBackend.validPopBrowserURL empty check from caller I was too late with review feedback to `513780f4f8`. Updates tailscale/corp#7948 Change-Id: I8fa3b4eba4efaff591a2d0bfe6ab4795638b7c3a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	513780f4f8	ipn/ipnlocal: move URL validation to LocalBackend Updates tailscale/corp#7948 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	4fc8538e2f	ipn/ipnlocal: check quad100 Host header in info page Updates tailscale/corp#7948 Change-Id: I0ab61c764bff9ba8afaf9070db73e971eb018477 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	49b0ce8180	ipn/ipnlocal: update profile on server sent profile changes We were not updating the LoginProfile.UserProfile when a netmap updated the UserProfile (e.g. when a node was tagged via the admin panel). Updates #713 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	6ea2d01626	ipn/ipnlocal: be more assertive about rules for applyPrefsToHostinfo (now Locked) The old docs were too cagey. Change-Id: I92c4fdc4165e7ca35c4537aebe51eb3604b56f6d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	235309adc4	all: store NL keys per profile This moves the NetworkLock key from a dedicated StateKey to be part of the persist.Persist struct. This struct is stored as part for ipn.Prefs and is also the place where we store the NodeKey. It also moves the ChonkDir from "/tka" to "/tka-profile/<profile-id>". The rename was intentional to be able to delete the "/tka" dir if it exists. This means that we will have a unique key per profile, and a unique directory per profile. Note: `tailscale logout` will delete the entire profile, including any keys. It currently does not delete the ChonkDir. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	fe81ee62d7	ipn/ipnlocal: do controlclient.Shutdown in a different goroutine We do not need to wait for it to complete. And we might have to call Shutdown from callback from the controlclient which might already be holding a lock that Shutdown requires. Updates #713 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	3f8e185003	health: add Warnable, move ownership of warnable items to callers The health package was turning into a rando dumping ground. Make a new Warnable type instead that callers can request an instance of, and then Set it locally in their code without the health package being aware of all the things that are warnable. (For plenty of things the health package will want to know details of how Tailscale works so it can better prioritize/suppress errors, but lots of the warnings are pretty leaf-y and unrelated) This just moves two of the health warnings. Can probably move more later. Change-Id: I51e50e46eb633f4e96ced503d3b18a1891de1452 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	b87cb2c4a5	ipn/ipnlocal: call restart backend on user changes This makes it so that the backend also restarts when users change, otherwise an extra call to Start was required. Updates #713 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	8e85227059	cmd/tailscale/cli: [set] handle selectively modifying routes/exit node Noticed this while debugging something else, we would reset all routes if either `--advertise-exit-node` or `--advertise-routes` were set. This handles correctly updating them. Also added tests. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	26d1fc867e	ipn/ipnlocal: delete profile on logout Updates #713 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
shayne	74e892cbc2	ipn/ipnlocal: listen to serve ports on netmap addrs (#6282 ) Updates tailscale/corp#7515 Signed-off-by: Shayne Sweeney <shayne@tailscale.com>	2 years ago
Brad Fitzpatrick	08e110ebc5	cmd/tailscale: make "up", "status" warn if routes and --accept-routes off Example output: # Health check: # - Some peers are advertising routes but --accept-routes is false Also, move "tailscale status" health checks to the bottom, where they won't be lost in large netmaps. Updates #2053 Updates #6266 Change-Id: I5ae76a0cd69a452ce70063875cd7d974bfeb8f1a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	6cc0036b40	ipn/ipnlocal: use updated prefs in tkaSyncIfNeeded Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	f00a49667d	control/controlclient: make Status.Persist a PersistView Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	4d330bac14	ipn/ipnlocal: add support for multiple user profiles Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Pat Maddox	9bf3ef4167	ssh/tailssh: add Tailscale SSH (server) support on FreeBSD Change-Id: I607194b6ef99205e777f3df93a74ffe1a2e0344c Signed-off-by: Pat Maddox <pat@ratiopbc.com>	2 years ago
shayne	e3a66e4d2f	ipn/localapi: introduce get/set config for serve (#6243 ) Updates tailscale/corp#7515 Signed-off-by: Shayne Sweeney <shayne@tailscale.com>	2 years ago
Brad Fitzpatrick	7b5866ac0a	ipn/ipnlocal: support serving files/directories too Updates tailscale/corp#7515 Change-Id: I7b4c924005274ba57763264313d70d2a0c55da30 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Aaron Klotz	73b8968404	ipn/ipnlocal: ensure Persist information is saved to server mode start state Numerous issues have been filed concerning an inability to install and run Tailscale headlessly in unattended mode, particularly after rebooting. The server mode `Prefs` stored in `server-state.conf` were not being updated with `Persist` state once the node had been succesfully logged in. Users have been working around this by finagling with the GUI to make it force a state rewrite. This patch makes that unnecessary by ensuring the required server mode state is updated when prefs are updated by the control client. Fixes https://github.com/tailscale/tailscale/issues/3186 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	2 years ago
Brad Fitzpatrick	4bccc02413	ipn/ipnlocal: use ServerConfig views internally Updates tailscale/corp#7515 Change-Id: Ica2bc44b92d281d5ce16cee55b7ca51c7910145c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	25e26c16ee	ipn/ipnlocal: start implementing web server bits of serve Updates tailscale/corp#7515 Change-Id: I96f4016161ba3c370492da941274c6d9a234c2bb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	df5e40f731	ipn: add WebServerConfig, add views cmd/viewer couldn't deal with that map-of-map. Add a wrapper type instead, which also gives us a place to add future stuff. Updates tailscale/corp#7515 Change-Id: I44a4ca1915300ea8678e5b0385056f0642ccb155 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	2daf0f146c	ipn/ipnlocal, wgengine/netstack: start handling ports for future serving Updates tailscale/corp#7515 Change-Id: I966e936e72a2ee99be8d0f5f16872b48cc150258 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	5bb7e0307c	cmd/tailscale, ipn/ipnlocal: add debug command to write to StateStore for dev Not for end users (unless directed by support). Mostly for ease of development for some upcoming webserver work. Change-Id: I43acfed217514567acb3312367b24d620e739f88 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	6afe26575c	ipn: make Notify.Prefs be a *ipn.PrefsView It is currently a `ipn.PrefsView` which means when we do a JSON roundtrip, we go from an invalid Prefs to a valid one. This makes it a pointer, which fixes the JSON roundtrip. This was introduced in `0957bc5af2`. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	e55ae53169	tailcfg: add Node.UnsignedPeerAPIOnly to let server mark node as peerapi-only capver 48 Change-Id: I20b2fa81d61ef8cc8a84e5f2afeefb68832bd904 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	910db02652	client/tailscale, tsnet, ipn/ipnlocal: prove nodekey ownership over noise Fixes #5972 Change-Id: Ic33a93d3613ac5dbf172d6a8a459ca06a7f9e547 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	d98305c537	cmd,ipn/ipnlocal,tailcfg: implement TKA disablement * Plumb disablement values through some of the internals of TKA enablement. * Transmit the node's TKA hash at the end of sync so the control plane understands each node's head. * Implement /machine/tka/disable RPC to actuate disablement on the control plane. There is a partner PR for the control server I'll send shortly. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Anton Tolchanov	193afe19cb	ipn/ipnlocal: add tags and a few other details to self status This makes tags, creation time, exit node option and primary routes for the current node exposed via `tailscale status --json` Signed-off-by: Anton Tolchanov <anton@tailscale.com>	2 years ago
Mihai Parparita	4e6e3bd13d	ipn/ipnlocal: fix a log line having function pointers instead of values Followup to using ipn.PrefsView (#6031). Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Maisem Ali	2a9ba28def	ipn/ipnlocal: set prefs before calling tkaSyncIfNeeded Caught this in a test in a different repo. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	9f39c3b10f	ipn/ipnlocal: make EditPrefs strip private keys before returning Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	a2d15924fb	types/persist: add PublicNodeKey helper Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	0957bc5af2	ipn/ipnlocal: use ipn.PrefsView Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	def089f9c9	portlist: unexport all Poller fields, removing unused one, rework channels Poller.C and Poller.c were duplicated for one caller. Add an accessor returning the receive-only version instead. It'll inline. Poller.Err was unused. Remove. Then Poller is opaque. The channel usage and shutdown was a bit sketchy. Clean it up. And document some things. Change-Id: I5669e54f51a6a13492cf5485c83133bda7ea3ce9 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	9475801ebe	ipn/ipnlocal: fix E.G.G. port number accounting Change-Id: Id35461fdde79448372271ba54f6e6af586f2304d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	630bcb5b67	tsnet,client/tailscale: add APIClient which runs API over Noise. Updates tailscale/corp#4383 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Andrew Dunham	c32f9f5865	cmd/tailscale, ipn: enable debug logs when --report flag is passed to bugreport (#5830 ) Change-Id: Id22e9f4a2dcf35cecb9cd19dd844389e38c922ec Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Tom DNetto	a515fc517b	ipn/ipnlocal: make tkaSyncIfNeeded exclusive with a mutex Running corp/ipn#TestNetworkLockE2E has a 1/300 chance of failing, and deskchecking suggests thats whats happening are two netmaps are racing each other to be processed through tkaSyncIfNeededLocked. This happens in the first place because we release b.mu during network RPCs. To fix this, we make the tka sync logic an exclusive section, so two netmaps will need to wait for tka sync to complete serially (which is what we would want anyway, as the second run through probably wont need to sync). Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Tom DNetto	227777154a	control/controlclient,ipn/ipnlocal,tailcfg: rotate node-key signature on register CAPVER 47 Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Brad Fitzpatrick	6d76764f37	ipn/ipnlocal: fix taildrop target list UI bug The macOS and iOS apps that used the /localapi/v0/file-targets handler were getting too many candidate targets. They wouldn't actually accept the file. This is effectively just a UI glitch in the wrong hosts being listed as valid targets from the source side. Change-Id: I6907a5a1c3c66920e5ec71601c044e722e7cb888 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	73db56af52	ipn/ipnlocal: filter peers with bad signatures when tka is enabled Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Brad Fitzpatrick	1841d0bf98	wgengine/magicsock: make debug-level stuff not logged by default And add a CLI/localapi and c2n mechanism to enable it for a fixed amount of time. Updates #1548 Change-Id: I71674aaf959a9c6761ff33bbf4a417ffd42195a7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	8343b243e7	all: consistently initialize Logf when creating tsdial.Dialers Most visible when using tsnet.Server, but could have resulted in dropped messages in a few other places too. Fixes #5743 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Andrew Dunham	b1867457a6	doctor: add package for running in-depth healthchecks; use in bugreport (#5413 ) Change-Id: Iaa4e5b021a545447f319cfe8b3da2bd3e5e5782b Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Andrew Dunham	e1bdbfe710	tailcfg, control/controlhttp, control/controlclient: add ControlDialPlan field (#5648 ) * tailcfg, control/controlhttp, control/controlclient: add ControlDialPlan field This field allows the control server to provide explicit information about how to connect to it; useful if the client's link status can change after the initial connection, or if the DNS settings pushed by the control server break future connections. Change-Id: I720afe6289ec27d40a41b3dcb310ec45bd7e5f3e Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Maisem Ali	d5781f61a9	ipn/ipnlocal: return usernames when Tailscale SSH is enabled It was checking if the sshServer was initialized as a proxy, but that could either not have been initialized yet or Tailscale SSH could have been disabled after intialized. Also bump tailcfg.CurrentCapabilityVersion Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Tom DNetto	e9b98dd2e1	control/controlclient,ipn/ipnlocal: wire tka enable/disable Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Maisem Ali	054ef4de56	tailcfg: mark CapabilityFileSharingTarget as inter-node Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	74674b110d	envknob: support changing envknobs post-init Updates #5114 Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	b8596f2a2f	net/dnsfallback: cache most recent DERP map on disk (#5545 ) This is especially helpful as we launch newer DERPs over time, and older clients have progressively out-of-date static DERP maps baked in. After this, as long as the client has successfully connected once, it'll cache the most recent DERP map it knows about. Resolves an in-code comment from @bradfitz Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Brad Fitzpatrick	ba3cc08b62	cmd/tailscale/cli: add backwards compatibility 'up' processing for legacy client Updates tailscale/corp#6781 Change-Id: I843fc810cbec0140d423d65db81e90179d6e0fa5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	761163815c	tailcfg: add Hostinfo.Userspace{,Router} bits Change-Id: Iad47f904872f2df146c1f63945f79cfddeac7fe8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	c66f99fcdc	tailcfg, control/controlclient, ipn/ipnlocal: add c2n (control-to-node) system This lets the control plane can make HTTP requests to nodes. Then we can use this for future things rather than slapping more stuff into MapResponse, etc. Change-Id: Ic802078c50d33653ae1f79d1e5257e7ade4408fd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	79905a1162	tka: make storage a parameter rather than an Authority struct member Updates #5435 Based on the discussion in #5435, we can better support transactional data models by making the underlying storage layer a parameter (which can be specialized for the request) rather than a long-lived member of Authority. Now that Authority is just an instantaneous snapshot of state, we can do things like provide idempotent methods and make it cloneable, too. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Mihai Parparita	7a5cf39d0d	ipn/ipnlocal: fix Taildrop not returning any sharing targets The CapabilityFileSharingTarget capability added by `eb32847d85` is meant to control the ability to share with nodes not owned by the current user, not to restrict all sharing (the coordination server is not currently populating the capability at all) Fixes tailscale/corp#6669 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Joe Tsai	32a1a3d1c0	util/deephash: avoid variadic argument for Update (#5372 ) Hashing []any is slow since hashing of interfaces is slow. Hashing of interfaces is slow since we pessimistically assume that cycles can occur through them and start cycle tracking. Drop the variadic signature of Update and fix callers to pass in an anonymous struct so that we are hashing concrete types near the root of the value tree. Signed-off-by: Joe Tsai <joetsai@digital-static.net> Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Brad Fitzpatrick	4ee64681ad	tailcfg, control/controlclient: make Debug settings sticky in a map session [capver 37] Fixes #4843 Change-Id: I3accfd91be474ac745cb47f5d6e866c37d5c5d2d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	486cc9393c	ipn/ipnlocal: fix log about local IPs when using exit nodes Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	a9f6cd41fd	all: use syncs.AtomicValue Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	4950fe60bd	syncs, all: move to using Go's new atomic types instead of ours Fixes #5185 Change-Id: I850dd532559af78c3895e2924f8237ccc328449d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	9bb5a038e5	all: use atomic.Pointer Also add some missing docs. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Tom DNetto	4001d0bf25	assorted: plumb tka initialization & network-lock key into tailscaled - A network-lock key is generated if it doesn't already exist, and stored in the StateStore. The public component is communicated to control during registration. - If TKA state exists on the filesystem, a tailnet key authority is initialized (but nothing is done with it for now). Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Maisem Ali	eb32847d85	tailcfg: add CapabilityFileSharingTarget to identify FileTargets This adds the inverse to CapabilityFileSharingSend so that senders can identify who they can Taildrop to. Updates #2101 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	116f55ff66	all: gofmt for Go 1.19 Updates #5210 Change-Id: Ib02cd5e43d0a8db60c1f09755a8ac7b140b670be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Denton Gentry	f85bb60eba	ipn/ipnlocal: prevent attempting to run SSH on QNAP for now tailscaled runs as a non-root user, SSH is not immediately working. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Denton Gentry	d17849461c	ipn/{ipnserver,ipnlocal}: support incoming Taildrop on QNAP Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Maisem Ali	4d0461f721	ipn/ipnlocal: logout ephemeral nodes on shutdown Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Mihai Parparita	ec649e707f	ipn/ipnlocal: prefer to use one CGNAT route on the Mac Together with `06aa141632` this minimizes the number of NEPacketTunnelNetworkSettings updates that we have to do, and thus avoids Chrome interrupting outstanding requests due to (perceived) network changes. Updates #3102 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	aa37aece9c	ipn/ipnlocal, net/dns, util/cloudenv: add AWS DNS support And remove the GCP special-casing from ipn/ipnlocal; do it only in the forwarder for .internal. Fixes #4980 Fixes #4981 Change-Id: I5c481e96d91f3d51d274a80fbd37c38f16dfa5cb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	88c2afd1e3	ipn/ipnlocal, net/dns, util/cloudenv: specialize DNS config on Google Cloud This does three things: If you're on GCP, it adds a .internal DNS split route to the metadata server, so we never break GCP DNS names. This lets people have some Tailscale nodes on GCP and some not (e.g. laptops at home) without having to add a Tailnet-wide .internal DNS route. If you already have such a route, though, it won't overwrite it. * If the 100.100.100.100 DNS forwarder has nowhere to forward to, it forwards it to the GCP metadata IP, which forwards to 8.8.8.8. This means there are never errNoUpstreams ("upstream nameservers not set") errors on GCP due to e.g. mangled /etc/resolv.conf (GCP default VMs don't have systemd-resolved, so it's likely a DNS supremacy fight) * makes the DNS fallback mechanism use the GCP metadata IP as a fallback before our hosted HTTP-based fallbacks I created a default GCP VM from their web wizard. It has no systemd-resolved. I then made its /etc/resolv.conf be empty and deleted its GCP hostnames in /etc/hosts. I then logged in to a tailnet with no global DNS settings. With this, tailscaled writes /etc/resolv.conf (direct mode, as no systemd-resolved) and sets it to 100.100.100.100, which then has regular DNS via the metadata IP and .internal DNS via the metadata IP as well. If the tailnet configures explicit DNS servers, those are used instead, except for .internal. This also adds a new util/cloudenv package based on version/distro where the cloud type is only detected once. We'll likely expand it in the future for other clouds, doing variants of this change for other popular cloud environments. Fixes #4911 RELNOTES=Google Cloud DNS improvements Change-Id: I19f3c2075983669b2b2c0f29a548da8de373c7cf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	87a4c75fd4	control/controlclient, ipn/ipnlocal: remove Client.SetExpirySooner, fix race Client.SetExpirySooner isn't part of the state machine. Remove it from the Client interface. And fix a use of LocalBackend.cc without acquiring the lock that guards that field. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	ef0d740270	control/controlclient: remove Client.SetStatusFunc It can't change at runtime. Make it an option. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	70a2797064	control/controlclient, ipn/ipnlocal: remove some Client methods Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a1e429f7c3	control/controlclient, types/netmap: remove unused LocalPort field Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	467eb2eca0	cmd/tailscale/cli, ipn/ipnlocal: give SSH tips when off/unconfigured Updates #3802 Change-Id: I6b9a3175f68a6daa670f912561f2c2ececc07770 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Praneet Loke	d8c05fc1b2	Update a Taildrop error message (#4818 ) ipn/ipnlocal: update error message on Taildrop send while not connected Signed-off-by: Praneet <1466314+praneetloke@users.noreply.github.com>	2 years ago
Melanie Warrick	3a182d5dd6	ipn/ipnstate: add ExitNodeStatus to share the exit node if it is in use, the IP, ID and whether its online. (#4761 ) - Updates #4619 Signed-off-by: nyghtowl <warrick@tailscale.com>	2 years ago
Brad Fitzpatrick	4007601f73	cmd/controlclient: wire up PingRequest peerapi pings too Updates tailscale/corp#754 Change-Id: I61ac3fc44783b54bd02455bcb0baf19159b7a9d2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	fbc079d82d	ipn/ipnlocal: prevent attempting to run SSH on Synology for now On DSM7 as a non-root user it'll run into problems. And we haven't tested on DSM6, even though it might work, but I doubt it. Updates #3802 Updates tailscale/corp#5468 Change-Id: I75729042e4788f03f9eb82057482a44b319f04f3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Jordan Whited	43f9c25fd2	cmd/tailscale: surface authentication errors in status.Health (#4748 ) Fixes #3713 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Maisem Ali	928530a112	ipn/ipnlocal: shutdown sshServer on tailscale down Also lazify SSHServer initialization to allow restarting the server on a subsequent `tailscale up` Updates #3802 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	4d85cf586b	cmd/tailscale, ipn/ipnlocal: add "peerapi" ping type For debugging when stuff like #4750 isn't working. RELNOTE=tailscale ping -peerapi Change-Id: I9c52c90fb046e3ab7d2b121387073319fbf27b99 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	7cd8c3e839	ssh/tailssh: terminate sessions when tailscaled shutsdown Ideally we would re-establish these sessions when tailscaled comes back up, however we do not do that yet so this is better than leaking the sessions. Updates #3802 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	da601c23e1	ipn/ipnlocal: add missing place where we set the SSH atomic This fixes the "tailscale up --authkey=... --ssh" path (or any "up" path that used Start instead of EditPrefs) which wasn't setting the bit. Updates #3802 Change-Id: Ifca532ec58296fedcedb5582312dfee884367ed7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	fd99c54e10	tailcfg,all: change structs to []*dnstype.Resolver Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	35111061e9	wgengine/netstack, ipn/ipnlocal: serve http://100.100.100.100/ For future stuff. Change-Id: I64615b8b2ab50b57e4eef1ca66fa72e3458cb4a9 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	3e1f2d01f7	ipn/ipnlocal: move Ping method from IPN bus to LocalBackend (HTTP) Change-Id: I61759f1dae8d9d446353db54c8b1e13bfffb3287 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	c60cbca371	control/controlclient: store netinfo and hostinfo separately Currently, when SetNetInfo is called it sets the value on hostinfo.NetInfo. However, when SetHostInfo is called it overwrites the hostinfo field which may mean it also clears out the NetInfo it had just received. This commit stores NetInfo separately and combines it into Hostinfo as needed so that control is always notified of the latest values. Also, remove unused copies of Hostinfo from ipn.Status and controlclient.Auto. Updates #tailscale/corp#4824 (maybe fixes) Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
James Tucker	ae483d3446	wgengine, net/packet, cmd/tailscale: add ICMP echo Updates tailscale/corp#754 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Tom DNetto	9dee6adfab	cmd/tailscaled,ipn/ipnlocal,wgengine/...: pass dns.Manager into netstack Needed for a following commit which moves magicDNS handling into netstack. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Maisem Ali	3012a2e1ca	ssh/tailssh,ipn/ipnlocal: terminate any active sessions on `up --ssh=false` Currently the ssh session isn't terminated cleanly, instead the packets are just are no longer routed to the in-proc SSH server. This makes it so that clients get a disconnection when the `RunSSH` pref changes to `false`. Updates #3802 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Mihai Parparita	2ec371fe8b	ipn: remove FakeExpireAfter Backend function No callers remain (last one was removed with tailscale/corp@1c095ae08f), and it's pretty esoteric. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Mihai Parparita	316523cc1e	ipn: remove enforceDefaults option from PrefsFromBytes The Mac client was using it, but it had the effect of the `RouteAll` ("Use Tailscale subnets") pref always being enabled at startup, regardless of the persisted value. enforceDefaults was added to handle cases from ~2 years ago where we ended up with persisted `"RouteAll": false` values in the keychain, but that should no longer be a concern. New users will get the default of it being enabled via `NewPrefs`. There will be a corresponding Mac client change to stop passing in enforceDefaults. For #3962 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Maisem Ali	5a1ef1bbb9	net/tsdial: add SystemDial as a wrapper on netns.Dial The connections returned from SystemDial are automatically closed when there is a major link change. Also plumb through the dialer to the noise client so that connections are auto-reset when moving from cellular to WiFi etc. Updates #3363 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	1a19aed410	ipn/ipnlocal: do not initialize peer api listeners when shutting down Updates tailscale/corp#4824 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	7a097ccc83	ipn/ipnlocal: close peerapi listeners on LocalBackend.Shutdown For tests. Now that we can always listen (whereas we used to fail prior to `a2c330c496`), some goroutine leak checks were failing in tests in another repo after that change. Change-Id: Id95a4b71167eca61962a48616d79741b9991e0bc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	8b81254992	ipn/ipnlocal: reject tailscale up --ssh if disabled on tailnet Updates #3802 Change-Id: I3f1e839391fe9b28270f506f4bb8d8e3d36716f5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	cc575fe4d6	net/dns: schedule DoH upgrade explicitly, fix Resolver.Addr confusion Two changes in one: * make DoH upgrades an explicitly scheduled send earlier, when we come up with the resolvers-and-delay send plan. Previously we were getting e.g. four Google DNS IPs and then spreading them out in time (for back when we only did UDP) but then later we added DoH upgrading at the UDP packet layer, which resulted in sometimes multiple DoH queries to the same provider running (each doing happy eyeballs dialing to 4x IPs themselves) for each of the 4 source IPs. Instead, take those 4 Google/Cloudflare IPs and schedule 5 things: first the DoH query (which can use all 4 IPs), and then each of the 4 IPs as UDP later. * clean up the dnstype.Resolver.Addr confusion; half the code was using it as an IP string (as documented) as half was using it as an IP:port (from some prior type we used), primarily for tests. Instead, document it was being primarily an IP string but also accepting an IP:port for tests, then add an accessor method on it to get the IPPort and use that consistently everywhere. Change-Id: Ifdd72b9e45433a5b9c029194d50db2b9f9217b53 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	a04eebf59f	ipn/ipnlocal: also use SSHPolicies when updating filterHash Updates #3802 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	8f5e5bff1e	cmd/tailscale, etc: make "tailscale up --ssh" fail fast when unavailable Fail on unsupported platforms (must be Linux or macOS tailscaled with WIP env) or when disabled by admin (with TS_DISABLE_SSH_SERVER=1) Updates #3802 Change-Id: I5ba191ed0d8ba4ddabe9b8fc1c6a0ead8754b286 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ade7bd8745	ssh/tailssh: close sessions on policy change if no longer allowed Updates #3802 Change-Id: I98503c2505b77ac9d0cc792614fcdb691761a70c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	4ec83fbad6	ipn/ipnlocal: only call updateFilter with mutex held And rename to updateFilterLocked to prevent future mistakes. Fixes #4427 Change-Id: I4d37b90027d5ff872a339ce8180f5723704848dc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	16f3520089	all: add arbitrary capability support Updates #4217 RELNOTE=start of WhoIsResponse capability support Change-Id: I6522998a911fe49e2f003077dad6164c017eed9b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	8ee044ea4a	ssh/tailssh: make the SSH server a singleton, register with LocalBackend Remove the weird netstack -> tailssh dependency and instead have tailssh register itself with ipnlocal when linked. This makes tailssh.server a singleton, so we can have a global map of all sessions. Updates #3802 Change-Id: Iad5caec3a26a33011796878ab66b8e7b49339f29 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	df9ce972c7	tailcfg, ipn/ipnlocal: add debug flag to enable one-big-CGNAT/10 route To experiment with avoiding Chrome ERR_NETWORK_CHANGED errors on route changes. Updates #3102 Change-Id: I339da14c684fdac45ac261566aa21bf2198672ff Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	50b4b8b2c6	ipn/ipnlocal: make peerIPs return a sorted slice Currently peerIPs doesn't do any sorting of the routes it returns. This is typically fine, however imagine the case of an HA subnet router failover. When a route R moves from peer A to peer B, the output of peerIPs changes. This in turn causes all the deephash check inside wgengine to fail as the hashed value of [R1, R2] is different than the hashed value of [R2, R1]. When the hash check failes, it causes wgengine to reconfigure all routes in the OS. This is especially problematic for macOS and iOS where we use the NetworkExtension. This commit makes it that the peerIPs are always sorted when returned, thus making the hash be consistent as long as the list of routes remains static. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	3ae701f0eb	net/tsaddr, wgengine/netstack: add IPv6 range that forwards to site-relative IPv4 This defines a new magic IPv6 prefix, fd7a:115c:a1e0:b1a::/64, a subset of our existing /48, where the final 32 bits are an IPv4 address, and the middle 32 bits are a user-chosen "site ID". (which must currently be 0000:00xx; the top 3 bytes must be zero for now) e.g., I can say my home LAN's "site ID" is "0000:00bb" and then advertise its 10.2.0.0/16 IPv4 range via IPv6, like: tailscale up --advertise-routes=fd7a:115c:a1e0:b1a::bb:10.2.0.0/112 (112 being /128 minuse the /96 v6 prefix length) Then people in my tailnet can: $ curl '[fd7a:115c:a1e0:b1a::bb:10.2.0.230]' <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" .... Updates #3616, etc RELNOTE=initial support for TS IPv6 addresses to route v4 "via" specific nodes Change-Id: I9b49b6ad10410a24b5866b9fbc69d3cae1f600ef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	309ddef852	net/netutil: add CheckIPForwardingLinux (#4301 ) Combine the code between `LocalBackend.CheckIPForwarding` and `controlclient.ipForwardingBroken`. Fixes #4300 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	6fecc16c3b	ipn/ipnlocal: do not process old status messages received out of order When `setWgengineStatus` is invoked concurrently from multiple goroutines, it is possible that the call invoked with a newer status is processed before a call with an older status. e.g. a status that has endpoints might be followed by a status without endpoints. This causes unnecessary work in the engine and can result in packet loss. This patch adds an `AsOf time.Time` field to the status to specifiy when the status was calculated, which later allows `setWgengineStatus` to ignore any status messages it receives that are older than the one it has already processed. Updates tailscale/corp#2579 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	cceacda5eb	ipn/ipnstate: put SSH Host Keys in ipnstate.PeerStatus Updates #3802 Change-Id: I47ba3b4545b25988f375bd867aecd98bb0da8d79 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d2f3ec8a63	envknob, ipn/ipnlocal: add SSH admin kill switch Updates #3802 Change-Id: I6127907446d1a6be1b097d9ba3b534f2b8eb707f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f3b13604b3	control/controlclient, ipn/ipnlocal, tailcfg: add MapResponse.PopBrowserURL Updates #3802 Change-Id: I89481fc5782a0cc8084354706f8f28d94f197325 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	6b9d938c1a	types/views: add generic Slice[T] and remove StringSlice Also make IPPrefixSliceOf use Slice[netaddr.IPPrefix] as it also provides additional functions besides the standard ones provided by Slice[T]. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	efc48b0578	ssh/tailssh, ipnlocal, controlclient: fetch next SSHAction from network Updates #3802 Change-Id: I08e98805ab86d6bbabb6c365ed4526f54742fd8e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	888e50e1f6	ipn/ipnlocal: migrate all platforms to controlplane.tailscale.com Updates #3488 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Nick O'Neill	1625e87526	control/controlclient, localapi: shorten expiry time via localapi (#4112 ) Signed-off-by: Nick O'Neill <nick@tailscale.com>	3 years ago
Brad Fitzpatrick	d5f8f38ac6	tailcfg: rename map request version to "capability version" And add a CapabilityVersion type, primarily for documentation. This makes MapRequest.Version, RegisterRequest.Version, and SetDNSRequest.Version all use the same version, which will avoid confusing in the future if Register or SetDNS ever changed their semantics on Version change. (Currently they're both always 1) This will requre a control server change to allow a SetDNSRequest.Version value other than 1 to be deployed first. Change-Id: I073042a216e0d745f52ee2dbc45cf336b9f84b7c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	c7a8f0992d	ipn/ipnlocal: use views for Peer.PrimaryRoutes and Peer.Tags RELNOTE=`tailscale status --json` now shows Tags and PrimaryRoutes Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	9cbb0913be	ipn/{ipnlocal,ipnstate}: add Tags and PrimaryRoutes to PeerStatus Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	f9a50779e2	cmd/tailscaled: add `-state=mem:` to support creation of an ephemeral node. RELNOTE=`tailscaled --state=mem:` registers as an ephemeral node and does not store state to disk. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	84138450a4	types/logger, logtail: add mechanism to do structured JSON logs e.g. the change to ipnlocal in this commit ultimately logs out: {"logtail":{"client_time":"2022-02-17T20:40:30.511381153-08:00","server_time":"2022-02-18T04:40:31.057771504Z"},"type":"Hostinfo","val":{"GoArch":"amd64","Hostname":"tsdev","IPNVersion":"1.21.0-date.20220107","OS":"linux","OSVersion":"Debian 11.2 (bullseye); kernel=5.10.0-10-amd64"},"v":1} Change-Id: I668646b19aeae4a2fed05170d7b279456829c844 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	bb93e29d5c	tailcfg, ipn/ipnlocal: add Hostinfo.SSH_HostKeys, send when SSH enabled (The name SSH_HostKeys is bad but SSHHostKeys is worse.) Updates #3802 Change-Id: I2a889019c9e8b065b668dd58140db4fcab868a91 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	72d8672ef7	tailcfg: make Node.Hostinfo a HostinfoView Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Ross Zurowski	6d02a48d8d	ipn: add `TailnetStatus` field to `tailscale status --json` (#3865 ) We need to capture some tailnet-related information for some Docker features we're building. This exposes the tailnet name and MagicDNS information via `tailscale status --json`. Fixes tailscale/corp#3670 Signed-off-by: Ross Zurowski <ross@rosszurowski.com>	3 years ago
Brad Fitzpatrick	01e8a152f7	ipn/ipnlocal: log most of Hostinfo once non-verbose at start-up Our previous Hostinfo logging was all as a side effect of telling control. And it got marked as verbose (as it was) This adds a one-time Hostinfo logging that's not verbose, early in start-up. Change-Id: I1896222b207457b9bb12ffa7cf361761fa4d3b3a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	a19c110dd3	envknob: track, log env knobs in use Fixes #3921 Change-Id: I8186053b5c09c43f0358b4e7fdd131361a6d8f2e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	2db6cd1025	ipn/ipnlocal, wgengine/magicsock, logpolicy: quiet more logs Updates #1548 Change-Id: Ied169f872e93be2857890211f2e018307d4aeadc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	86a902b201	all: adjust some log verbosity Updates #1548 Change-Id: Ia55f1b5dc7dfea09a08c90324226fb92cd10fa00 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	bd90781b34	ipn/ipnlocal, wgengine/netstack: use netstack for peerapi server We're finding a bunch of host operating systems/firewalls interact poorly with peerapi. We either get ICMP errors from the host or users need to run commands to allow the peerapi port: https://github.com/tailscale/tailscale/issues/3842#issuecomment-1025133727 ... even though the peerapi should be an internal implementation detail. Rather than fight the host OS & firewalls, this change handles the server side of peerapi entirely in netstack (except on iOS), so it never makes its way to the host OS where it might be messed with. Two main downsides are: 1) netstack isn't as fast, but we don't really need speed for peerapi. And actually, with fewer trips to/from the kernel, we might actually make up for some of the netstack performance loss by staying in userspace. 2) tcpdump / Wireshark etc packet captures will no longer see the peerapi traffic. Oh well. Crawshaw's been wanting to add packet capture server support to tailscaled, so we'll probably do that sooner now. A future change might also then use peerapi for the client-side (except on iOS). Updates #3842 (probably fixes, as well as many exit node issues I bet) Change-Id: Ibc25edbb895dc083d1f07bd3cab614134705aa39 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	857cd6c0d7	ipn/ipnstate: add TailnetName to status RELNOTE=tailscale status --json \| jq .TailnetName Fixes tailscale/corp#3665 Change-Id: I85de027ba2781eb31ee1e0c5ab913b0dfa5b4c86 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f3c0023add	wgengine/netstack: add an SSH server experiment Disabled by default. To use, run tailscaled with: TS_SSH_ALLOW_LOGIN=you@bar.com And enable with: $ TAILSCALE_USE_WIP_CODE=true tailscale up --ssh=true Then ssh [any-user]@[your-tailscale-ip] for a root bash shell. (both the "root" and "bash" part are temporary) Updates #3802 Change-Id: I268f8c3c95c8eed5f3231d712a5dc89615a406f0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	3690bfecb0	ipn/ipnlocal: fix cert fetching on macOS GUI platforms And clarify the directory they get written to when under the sandbox. Fixes #3667 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	506c727e30	ipnlocal, net/{dns,tsaddr,tstun}, wgengine: support MagicDNS on IPv6 Fixes #3660 RELNOTE=MagicDNS now works over IPv6 when CGNAT IPv4 is disabled. Change-Id: I001e983df5feeb65289abe5012dedd177b841b45 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	b09000ad5d	ipn/localapi: add debug handler to Rebind, ReSTUN magicsock And more later probably. Updates #3619 Change-Id: Ia4cba34a7c0dcce4d2eddec8aae17f32b51c207f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	add6dc8ccc	ipn/ipnlocal: make TestShrinkDefaultRoute hermetic Make shrinkDefaultRoute a pure function. Instead of calling interfaceRoutes, accept that information as parameters. Hard-code those parameters in TestShrinkDefaultRoute. Fixes #3580 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	8f43ddf1a2	ipn/ipnlocal, health: populate self node's Online bit in tailscale status One option was to just hide "offline" in the text output, but that doesn't fix the JSON output. The next option was to lie and say it's online in the JSON (which then fixes the "offline" in the text output). But instead, this sets the self node's "Online" to whether we're in an active map poll. Fixes #3564 Change-Id: I9b379989bd14655198959e37eec39bb570fb814a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	93ae11105d	ipn/ipnlocal: clear magicsock's netmap on logout magicsock was hanging onto its netmap on logout, which caused tailscale status to display partial information about a bunch of zombie peers. After logout, there should be no peers. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	cced414c7d	net/dns/resolver: add Windows ExitDNS service support, using net package Updates #1713 Updates #835 Change-Id: Ia71e96d0632c2d617b401695ad68301b07c1c2ec Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7b9c7bc42b	ipn/ipnstate: remove old deprecated TailAddr IPv4-only field It's been a bunch of releases now since the TailscaleIPs slice replacement was added. Change-Id: I3bd80e1466b3d9e4a4ac5bedba8b4d3d3e430a03 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	878a20df29	net/dns: add GetBaseConfig to CallbackRouter. Allow users of CallbackRouter to supply a GetBaseConfig implementation. This is expected to be used on Android, which currently lacks both a) platform support for Split-DNS and b) a way to retrieve the current DNS servers. iOS/macOS also use the CallbackRouter but have platform support for SplitDNS, so don't need getBaseConfig. Updates https://github.com/tailscale/tailscale/issues/2116 Updates https://github.com/tailscale/tailscale/issues/988 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Brad Fitzpatrick	c0701b130d	ipn/ipnstate, cmd/tailscale: add Online bool to tailscale status & --json Fixes #3533 Change-Id: I2f6f0d712cf3f987fba1c15be74cdb5c8d565f04 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Todd Neal	c18dc57861	ipn/{ipnserver,ipnlocal}: support incoming Taildrop on TrueNAS Signed-off-by: Todd Neal <todd@tneal.org>	3 years ago
Brad Fitzpatrick	abc00e9c8d	ipn/{ipnserver,ipnlocal}: support incoming Taildrop on Synology If the user has a "Taildrop" shared folder on startup and the "tailscale" system user has read/write access to it, then the user can "tailscale file cp" to their NAS. Updates #2179 (would be fixes, but not super ideal/easy yet) Change-Id: I68e59a99064b302abeb6d8cc84f7d2a09f764990 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	9c5c9d0a50	ipn/ipnlocal, net/tsdial: make SOCKS/HTTP dials use ExitDNS And simplify, unexport some tsdial/netstack stuff in the the process. Fixes #3475 Change-Id: I186a5a5cbd8958e25c075b4676f7f6e70f3ff76e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	adc5997592	net/tsdial: give netstack a Dialer, start refactoring name resolution This starts to refactor tsdial.Dialer's name resolution to have different stages: in-memory MagicDNS vs system resolution. A future change will plug in ExitDNS resolution. This also plumbs a Dialer into netstack and unexports the dnsMap internals. And it removes some of the async AddNetworkMapCallback usage and replaces it with synchronous updates of the Dialer's netmap from LocalBackend, since the LocalBackend has the Dialer too. Updates #3475 Change-Id: Idcb7b1169878c74f0522f5151031ccbc49fe4cb4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	43983a4a3b	ipn/ipnlocal: run peerapi even if Taildrop storage not configured Change-Id: I77f9ecbe4617d01d13aa1127fa59c83f2aa3e1b8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	44d0c1ab06	ipn/ipnlocal: resolve exit node IP to ID at EditPrefs time. Without this, enabling an exit node immediately blackholes all traffic, but doesn't correctly let it flow to the exit node until the next netmap update. Fixes #3447 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	ad3d6e31f0	net/tsdial: move macOS/iOS peerapi sockopt logic from LocalBackend Change-Id: I812cae027c40c70cdc701427b1a1850cd9bcd60c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c7fb26acdb	net/tsdial: also plumb TUN name and monitor into tsdial.Dialer In prep for moving stuff out of LocalBackend. Change-Id: I9725aa9c3ebc7275f8c40e040b326483c0340127 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c37af58ea4	net/tsdial: move more weirdo dialing into new tsdial package, plumb Not done yet, but this move more of the outbound dial special casing from random packages into tsdial, which aspires to be the one unified place for all outbound dialing shenanigans. Then this plumbs it all around, so everybody is ultimately holding on to the same dialer. As of this commit, macOS/iOS using an exit node should be able to reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt to stay within the Network Extension. A number of steps remain, including but limited to: * move a bunch more random dialing stuff * make netstack-mode tailscaled be able to use exit node's DNS proxy, teaching tsdial's resolver to use it when an exit node is in use. Updates #1713 Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	3ae6f898cf	ipn/ipnlocal, net/dns/resolver: use exit node's DoH proxy when available Updates #1713 Change-Id: I3695a40ec12d2b4e6dac41cf4559daca6dddd68e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	2a95ee4680	cmd/tailscale, ipn/ipnstate: note which nodes are exit nodes in status Fixes #3446 Change-Id: Ib41d588e7fa434c02d134fa449f85b0e15083683 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	b811a316bc	tailcfg, ipn/ipnlocal: advertise a Service when exit node DNS proxy available Updates #1713 Change-Id: I20c8e2ad1062d82ef17363414e372133f4c7181e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	135580a5a8	tailcfg, ipn/ipnlocal, net/dns: forward exit node DNS on Unix to system DNS Updates #1713 Change-Id: I4c073fec0992d9e01a9a4ce97087d5af0efdc68d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c2efe46f72	ipn/ipnlocal: restrict exit node DoH server based on ACL'ed packet filter Don't be a DoH DNS server to peers unless the Tailnet admin has permitted that peer autogroup:internet access. Updates #1713 Change-Id: Iec69360d8e4d24d5187c26904b6a75c1dabc8979 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	097602b3ca	ipn/ipnlocal: warn more precisely about IP forwarding issues on linux. If IP forwarding is disabled globally, but enabled per-interface on all interfaces, don't complain. If only some interfaces have forwarding enabled, warn that some subnet routing/exit node traffic may not work. Fixes #1586 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	33c541ae30	ipn/ipnlocal: populate self status from netmap in ipnlocal, not magicsock. Fixes #1933 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	955aa188b3	ipn/ipnlocal: fix logging We were missing an argument here. Also, switch to %q, in case anything weird is happening with these strings. Updates tailscale/corp#461 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	283ae702c1	ipn/ipnlocal: start adding DoH DNS server to peerapi when exit node Updates #1713 Change-Id: I8d9c488f779e7acc811a9bc18166a2726198a429 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	d6dde5a1ac	ipn/ipnlocal: handle key extensions after key has already expired Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	337757a819	ipn/ipnlocal, control/controlclient: don't propagate all map errors to UI Fixes regression from `81cabf48ec` which made all map errors be sent to the frontend UI. Fixes #3230 Change-Id: I7f142c801c7d15e268a24ddf901c3e6348b6729c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	0532eb30db	all: replace tailcfg.DiscoKey with key.DiscoPublic. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	649f7556e8	cmd/tailscaled, ipn: add tailscaled --statedir flag for var directory Fixes #2932 Change-Id: I1aa2b323ad542386d140f8336bcc4dcbb8310bd0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	3fd5f4380f	util/multierr: new package github.com/go-multierror/multierror served us well. But we need a few feature from it (implement Is), and it's not worth maintaining a fork of such a small module. Instead, I did a clean room implementation inspired by its API. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Anderson	7e6a1ef4f1	tailcfg: use key.NodePublic in wire protocol types. Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	7e8d5ed6f3	ipn: use key.NodePublic instead of tailcfg.NodeKey Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	c17250cee2	ipn/ipnstate: use key.NodePublic instead of tailcfg.NodeKey. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	418adae379	various: use NodePublic.AsNodeKey() instead of tailcfg.NodeKeyFromNodePublic() Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	429632d32c	ipn/ipnlocal: treat js/wasm interative logins as ephemeral for now At least until js/wasm starts using browser LocalStorage or something. But for the foreseeable future, any login from a browser should be considered ephemeral as the tab can close at any time and lose the wireguard key, never to be seen again. Updates #3157 Change-Id: I6c410d86dc7f9f233c3edd623313d9dee2085aac Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	c1d009b9e9	ipn/ipnstate: use key.NodePublic instead of the generic key.Public. Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	0c546a28ba	types/persist: use new node key type. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Maisem Ali	81cabf48ec	control/controlclient,tailcfg: propagate registration errors to the frontend Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago

... 2 3 4 5 6 ...

526 Commits (3056a98bbdcec3308a3b6f74cdcd9f0d9b11922a)