556 Commits (266c14d6ca37ee929acdf42c796c01d7f031229a)

Author	SHA1	Message	Date
Brad Fitzpatrick	053a1d1340	all: annotate log verbosity levels on most egregiously spammy log prints ... Fixes #924 Fixes #282 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	294ceb513c	ipn, wgengine/magicsock: fix `tailscale status` display. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	c8c493f3d9	wgengine/magicsock: make ReceiveIPv4 a little easier to follow. ... The previous code used a lot of whole-function variables and shared behavior that only triggered based on prior action from a single codepath. Instead of that, move the small amounts of "shared" code into each switch case. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	0ad109f63d	wgengine/magicsock: move legacy endpoint creation into legacy.go. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	f873da5b16	wgengine/magicsock: move more legacy endpoint handling. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	58fcd103c4	wgengine/magicsock: move legacy sending code to legacy.go. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	65ae66260f	wgengine/magicsock: unexport AddrSet. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	c9b9afd761	wgengine/magicsock: move most legacy nat traversal bits to another file. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	554a20becb	wgengine/magicsock: only log about lazy config when actually doing lazy config. ... Before, tailscaled would log every 10 seconds when the periodic noteRecvActivity call happens. This is noisy, but worse it's misleading, because the message suggests that the disco code is starting a lazy config run for a missing peer, whereas in fact it's just an internal piece of keepalive logic. With this change, we still log when going from 0->1 tunnel for the peer, but not every 10s thereafter. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	fa412c8760	wgengine/filter, wgengine/magicsock: use new IP.BitLen to simplify some code	4 years ago
David Anderson	9cee0bfa8c	wgengine/magicsock: sprinkle more docstrings. ... Magicsock is too damn big, but this might help me page it back in faster next time. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	713cbe84c1	wgengine/magicsock: use net.JoinHostPort when host might have colons (udp6) ... Only affected tests. (where it just generated log spam)	4 years ago
Brad Fitzpatrick	450cfedeba	wgengine/magicsock: quiet an IPv6 warning in tests ... In tests, we force binding to localhost to avoid OS firewall warning dialogs. But for IPv6, we were trying (and failing) to bind to 127.0.0.1. You'd think we'd just say "localhost", but that's apparently ill defined. See https://tools.ietf.org/html/draft-ietf-dnsop-let-localhost-be-localhost and golang/go#22826. (It's bitten me in the past, but I can't remember specific bugs.) So use "::1" explicitly for "udp6", which makes the test quieter.	4 years ago
Brad Fitzpatrick	fd2a30cd32	wgengine/magicsock: make test pass on Windows and without firewall dialog box ... Updates #50	4 years ago
Brad Fitzpatrick	ac866054c7	wgengine/magicsock: add a backoff on DERP reconnects ... Fixes #808	4 years ago
Brad Fitzpatrick	105a820622	wgengine/magicsock: skip an endpoint update at start-up ... At startup the client doesn't yet have the DERP map so can't do STUN queries against DERP servers, so it only knows it local interface addresses, not its STUN-mapped addresses. We were reporting the interface-local addresses to control, getting the DERP map, and then immediately reporting the full set of updates. That was an extra HTTP request to control, but worse: it was an extra broadcast from control out to all the peers in the network. Now, skip the initial update if there are no stun results and we don't have a DERP map. More work remains optimizing start-up requests/map updates, but this is a start. Updates tailscale/corp#557	4 years ago
Brad Fitzpatrick	2076a50862	wgengine/magicsock: finish a comment sentence that ended prematurely	4 years ago
Brad Fitzpatrick	3e4c46259d	wgengine/magicsock: don't do netchecks either when network is down ... A continuation of 6ee219a25d Updates #640	4 years ago
Brad Fitzpatrick	6ee219a25d	ipn, wgengine, magicsock, tsdns: be quieter and less aggressive when offline ... If no interfaces are up, calm down and stop spamming so much. It was noticed as especially bad on Windows, but probably was bad everywhere. I just have the best network conditions testing on a Windows VM. Updates #604	4 years ago
Christina Wen	48fbe93e72	wgengine/magicsock: clarify pre-disco 'tailscale ping' error message ... This change clarifies the error message when a user pings a peer that is using an outdated version of Tailscale.	4 years ago
Josh Bleecher Snyder	0c0239242c	wgengine/magicsock: make discoPingPurpose a stringer ... It was useful for debugging once, it'll probably be useful again. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	57e642648f	wgengine/magicsock: fix typo in comment	4 years ago
Brad Fitzpatrick	756d6a72bd	wgengine: lazily create peer wireguard configs more explicitly ... Rather than consider bigs jumps in last-received-from activity as a signal to possibly reconfigure the set of wireguard peers to have configured, instead just track the set of peers that are currently excluded from the configuration. Easier to reason about. Also adds a bit more logging. This might fix an error we saw on a machine running a recent unstable build: 2020-08-26 17:54:11.528033751 +0000 UTC: 8.6M/92.6M magicsock: [unexpected] lazy endpoint not created for [UcppE], d:42a770f678357249 2020-08-26 17:54:13.691305296 +0000 UTC: 8.7M/92.6M magicsock: DERP packet received from idle peer [UcppE]; created=false 2020-08-26 17:54:13.691383687 +0000 UTC: 8.7M/92.6M magicsock: DERP packet from unknown key: [UcppE] If it does happen again, though, we'll have more logs.	4 years ago
halulu	f27a57911b	cmd/tailscale: add derp and endpoints status (#703) ... cmd/tailscale: add local node's information to status output (by default) RELNOTE=yes Updates #477 Signed-off-by: Halulu <lzjluzijie@gmail.com>	4 years ago
David Crawshaw	dd2c61a519	magicsock: call RequestStatus when DERP connects ... Second attempt. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
David Crawshaw	a67b174da1	Revert "magicsock: call RequestStatus when DERP connects" ... Seems to break linux CI builder. Cannot reproduce locally, so attempting a rollback. This reverts commit cd7bc02ab1. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
David Crawshaw	cd7bc02ab1	magicsock: call RequestStatus when DERP connects ... Without this, a freshly started ipn client will be stuck in the "Starting" state until something triggers a call to RequestStatus. Usually a UI does this, but until then we can sit in this state until poked by an external event, as is evidenced by our e2e tests locking up when DERP is attached. (This only recently became a problem when we enabled lazy handshaking everywhere, otherwise the wireugard tunnel creation would also trigger a RequestStatus.) Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Brad Fitzpatrick	f6dc47efe4	tailcfg, controlclient, magicsock: add control feature flag to enable DRPO ... Updates #150	4 years ago
Brad Fitzpatrick	85c3d17b3c	wgengine/magicsock: use disco ping src as a candidate endpoint ... Consider: Hard NAT (A) <---> Hard NAT w/ mapped port (B) If A sends a packet to B's mapped port, A can disco ping B directly, with low latency, without DERP. But B couldn't establish a path back to A and needed to use DERP, despite already logging about A's endpoint and adding a mapping to it for other purposes (the wireguard conn.Endpoint lookup also needed it). This adds the tracking to discoEndpoint too so it'll be used for finding a path back. Fixes tailscale/corp#556 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	0512fd89a1	wgengine/magicsock: simplify handlePingLocked ... It's no longer true that 'de may be nil'	4 years ago
Brad Fitzpatrick	84dc891843	cmd/tailscale/cli: add ping subcommand ... For example: $ tailscale ping -h USAGE ping <hostname-or-IP> FLAGS -c 10 max number of pings to send -stop-once-direct true stop once a direct path is established -verbose false verbose output $ tailscale ping mon.ts.tailscale.com pong from monitoring (100.88.178.64) via DERP(sfo) in 65ms pong from monitoring (100.88.178.64) via DERP(sfo) in 252ms pong from monitoring (100.88.178.64) via [2604:a880:2:d1::36:d001]:41641 in 33ms Fixes #661 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	9a346fd8b4	wgengine,magicsock: fix two lazy wireguard config issues ... 1) we weren't waking up a discoEndpoint that once existed and went idle for 5 minutes and then got a disco message again. 2) userspaceEngine.noteReceiveActivity had a buggy check; fixed and added a test	4 years ago
Brad Fitzpatrick	cff737786e	wgengine/magicsock: fix lazy config deadlock, document more lock ordering ... This removes the atomic bool that tried to track whether we needed to acquire the lock on a future recursive call back into magicsock. Unfortunately that hack doesn't work because we also had a lock ordering issue between magicsock and userspaceEngine (see issue). This documents that too. Fixes #644	4 years ago
Brad Fitzpatrick	2bd9ad4b40	wgengine: fix deadlock between engine and magicsock	4 years ago
Brad Fitzpatrick	7c38db0c97	wgengine/magicsock: don't deadlock on pre-disco Endpoints w/ lazy wireguard configs ... Fixes tailscale/tailscale#637	4 years ago
Brad Fitzpatrick	4987a7d46c	wgengine/magicsock: when hard NAT, add stun-ipv4:static-port as candidate ... If a node is behind a hard NAT and is using an explicit local port number, assume they might've mapped a port and add their public IPv4 address with the local tailscaled's port number as a candidate endpoint.	4 years ago
Brad Fitzpatrick	bfcb0aa0be	wgengine/magicsock: deflake tests, Close deadlock again ... Better fix than 37903a9056 Fixes tailscale/corp#533	4 years ago
Brad Fitzpatrick	cb970539a6	wgengine/magicsock: remove TODO comment that's no longer applicable	4 years ago
Brad Fitzpatrick	915f65ddae	wgengine/magicsock: stop disco activity on IPN stop ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c180abd7cf	wgengine/magicsock: merge errClosed and errConnClosed	4 years ago
Brad Fitzpatrick	d55fdd4669	wgengine/magicsock: update, flesh out a TODO	4 years ago
Brad Fitzpatrick	58b721f374	wgengine/magicsock: deflake some tests with an ugly hack ... Starting with fe68841dc7, some e2e tests got flaky. Rather than debug them (they're gnarly), just revert to the old behavior as far as those tests are concerned. The tests were somehow using magicsock without a private key and expecting it to do ... something. My goal with fe68841dc7 was to stop log spam and unnecessary work I saw on the iOS app when when stopping the app. Instead, only stop doing that work on any transition from once-had-a-private-key to no-longer-have-a-private-key. That fixes what I wanted to fix while still making the mysterious e2e tests happy.	4 years ago
David Anderson	0249236cc0	ipn/ipnstate: record assigned Tailscale IPs. ... wgengine/magicsock: use ipnstate to find assigned Tailscale IPs. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	f582eeabd1	wgengine/magicsock: add a test for active path discovery. ... Uses natlab only, because the point of this active discovery test is going to be that it should get through a lot of obstacles. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	37903a9056	wgengine/magicsock: fix occasional deadlock on Conn.Close on c.derpStarted ... The deadlock was: * Conn.Close was called, which acquired c.mu * Then this goroutine scheduled: if firstDerp { startGate = c.derpStarted go func() { dc.Connect(ctx) close(c.derpStarted) }() } * The getRegion hook for that derphttp.Client then ran, which also tries to acquire c.mu. This change makes that hook first see if we're already in a closing state and then it can pretend that region doesn't exist.	4 years ago
Brad Fitzpatrick	fe68841dc7	wgengine/magicsock: log better with less spam on transition to stopped state ... Required a minor test update too, which now needs a private key to get far enough to test the thing being tested.	4 years ago
Brad Fitzpatrick	e298327ba8	wgengine/magicsock: remove overkill, slow reflect.DeepEqual of NetworkMap ... No need to allocate or compare all the fields we don't care about.	4 years ago
Brad Fitzpatrick	16a9cfe2f4	wgengine: configure wireguard peers lazily, as needed ... wireguard-go uses 3 goroutines per peer (with reasonably large stacks & buffers). Rather than tell wireguard-go about all our peers, only tell it about peers we're actively communicating with. That means we need hooks into magicsock's packet receiving path and tstun's packet sending path to lazily create a wireguard peer on demand from the network map. This frees up lots of memory for iOS (where we have almost nothing left for larger domains with many users). We should ideally do this in wireguard-go itself one day, but that'd be a pretty big change. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	5066b824a6	wgengine/magicsock: don't log about disco ping timeouts if we have a working address ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c06d2a8513	wgengine/magicsock: fix typo in comment	4 years ago
Brad Fitzpatrick	bf195cd3d8	wgengine/magicsock: reduce log verbosity of discovery messages ... Don't log heartbeat pings & pongs. Track the reason for pings and then only log the ping/pong traffic if it was for initial path discovery.	4 years ago
Brad Fitzpatrick	10ac066013	all: fix vet warnings	4 years ago
Brad Fitzpatrick	d74c9aa95b	wgengine/magicsock: update comment, fix earlier commit ... 891898525c had a continue that meant the didCopy synchronization never ran. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c976264bd1	wgengine/magicsock: gofmt	4 years ago
Dmytro Shynkevych	f3e2b65637	wgengine/magicsock: time.Sleep -> time.After ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Dmytro Shynkevych	380ee76d00	wgengine/magicsock: make time.Sleep in runDerpReader respect cancellation. ... Before this patch, the 250ms sleep would not be interrupted by context cancellation, which would result in the goroutine sometimes lingering in tests (100ms grace period). Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Dmytro Shynkevych	891898525c	wgengine/magicsock: make receive from didCopy respect cancellation. ... Very rarely, cancellation occurs between a successful send on derpRecvCh and a call to copyBuf on the receiving side. Without this patch, this situation results in <-copyBuf blocking indefinitely. Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	a2267aae99	wgengine: only launch pingers for peers predating the discovery protocol ... Peers advertising a discovery key know how to speak the discovery protocol and do their own heartbeats to get through NATs and keep NATs open. No need for the pinger except for with legacy peers.	4 years ago
Dmytro Shynkevych	2f15894a10	wgengine/magicsock: wait for derphttp client goroutine to exit ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	6c74065053	wgengine/magicsock, tstest/natlab: start hooking up natlab to magicsock ... Also adds ephemeral port support to natlab. Work in progress. Pairing with @danderson.	4 years ago
Brad Fitzpatrick	bd59bba8e6	wgengine/magicsock: stop discoEndpoint timers on Close ... And add some defensive early returns on c.closed.	4 years ago
Brad Fitzpatrick	de875a4d87	wgengine/magicsock: remove DisableSTUNForTesting	4 years ago
Brad Fitzpatrick	5c6d8e3053	netcheck, tailcfg, interfaces, magicsock: survey UPnP, NAT-PMP, PCP ... Don't do anything with UPnP, NAT-PMP, PCP yet, but see how common they are in the wild. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	6196b7e658	wgengine/magicsock: change API to not permit disco key changes ... Generate the disco key ourselves and give out the public half instead. Fixes #525	4 years ago
Brad Fitzpatrick	5132edacf7	wgengine/magicsock: fix data race from undocumented wireguard-go requirement ... Endpoints need to be Stringers apparently. Fixes tailscale/corp#422	4 years ago
Brad Fitzpatrick	630379a1d0	cmd/tailscale: add tailscale status region name, last write, consistently star ... There's a lot of confusion around what tailscale status shows, so make it better: show region names, last write time, and put stars around DERP too if active. Now stars are always present if activity, and always somewhere.	4 years ago
Brad Fitzpatrick	9a8700b02a	wgengine/magicsock: add discoEndpoint heartbeat ... Updates #483	4 years ago
Brad Fitzpatrick	9f930ef2bf	wgengine/magicsock: remove the discoEndpoint.timers map ... It ended up being more complicated than it was worth.	4 years ago
Brad Fitzpatrick	f5f3885b5b	wgengine/magicsock: bunch of misc discovery path cleanups ... * fix tailscale status for peers using discovery * as part of that, pull out disco address selection into reusable and testable discoEndpoint.addrForSendLocked * truncate ping/pong logged hex txids in half to eliminate noise * move a bunch of random time constants into named constants with docs * track a history of per-endpoint pong replies for future use & status display * add "send" and " got" prefix to discovery message logging immediately before the frame type so it's easier to read than searching for the "<-" or "->" arrows earlier in the line; but keep those as the more reasily machine readable part for later. Updates #483	4 years ago
Brad Fitzpatrick	6c70cf7222	wgengine/magicsock: stop ping timeout timer on pong receipt, misc log cleanup ... Updates #483	4 years ago
Brad Fitzpatrick	c52905abaa	wgengine/magicsock: log less on no-op disco route switches ... Also, renew trustBestAddrUntil even if latency isn't better.	4 years ago
Brad Fitzpatrick	0f0ed3dca0	wgengine/magicsock: clean up discovery logging ... Updates #483	4 years ago
Brad Fitzpatrick	056fbee4ef	wgengine/magicsock: add TS_DEBUG_OMIT_LOCAL_ADDRS knob to force STUN use only ... For debugging.	4 years ago
Brad Fitzpatrick	e03cc2ef57	wgengine/magicsock: populate discoOfAddr upon receiving ping frames ... Updates #483	4 years ago
Brad Fitzpatrick	275a20f817	wgengine/magicsock: keep discoOfAddr populated, use it for findEndpoint ... Update the mapping from ip:port to discokey, so when we retrieve a packet from the network, we can find the same conn.Endpoint that we gave to wireguard-go previously, without making it think we've roamed. (We did, but we're not using its roaming.) Updates #483	4 years ago
Brad Fitzpatrick	77e89c4a72	wgengine/magicsock: handle CallMeMaybe discovery mesages ... Roughly feature complete now. Testing and polish remains. Updates #483	4 years ago
Brad Fitzpatrick	710ee88e94	wgengine/magicsock: add timeout on discovery pings, clean up state ... Updates #483	4 years ago
Brad Fitzpatrick	77d3ef36f4	wgengine/magicsock: hook up discovery messages, upgrade to LAN works ... Ping messages now go out somewhat regularly, pong replies are sent, and pong replies are now partially handled enough to upgrade off DERP to LAN. CallMeMaybe packets are sent & received over DERP, but aren't yet handled. That's next (and regular maintenance timers), and then WAN should work. Updates #483	4 years ago
Brad Fitzpatrick	9b8ca219a1	wgengine/magicsock: remove allocs in UDP write, use new netaddr.PutUDPAddr ... The allocs were only introduced yesterday with a TODO. Now they're gone again.	4 years ago
Brad Fitzpatrick	7b3c0bb7f6	wgengine/magicsock: fix crash reading DERP packet ... Starting at yesterday's e96f22e560 (convering some UDPAddrs to IPPorts), Conn.ReceiveIPv4 could return a nil addr, which would make its way through wireguard-go and blow up later. The DERP read path wasn't initializing the addr result parameter any more, and wgRecvAddr wasn't checking it either. Fixes #515	4 years ago
Brad Fitzpatrick	47b4a19786	wgengine/magicsock: use netaddr.ParseIPPort instead of net.ResolveUDPAddr	4 years ago
Brad Fitzpatrick	f7124c7f06	wgengine/magicsock: start of discoEndpoint state tracking ... Updates #483	4 years ago
Brad Fitzpatrick	92252b0988	wgengine/magicsock: add a little LRU cache for netaddr.IPPort lookups ... And while plumbing, a bit of discovery work I'll need: the endpointOfAddr map to map from validated paths to the discoEndpoint. Not being populated yet. Updates #483	4 years ago
Brad Fitzpatrick	2d6e84e19e	net/netcheck, wgengine/magicsock: replace more UDPAddr with netaddr.IPPort	4 years ago
Brad Fitzpatrick	9070aacdee	wgengine/magicsock: minor comments & logging & TODO changes	4 years ago
Brad Fitzpatrick	e96f22e560	wgengine/magicsock: start handling disco message, use netaddr.IPPort more ... Updates #483	4 years ago
Brad Fitzpatrick	a83ca9e734	wgengine/magicsock: cache precomputed nacl/box shared keys ... Updates #483	4 years ago
Brad Fitzpatrick	a975e86bb8	wgengine/magicsock: add new endpoint type used for discovery-supporting peers ... This adds a new magicsock endpoint type only used when both sides support discovery (that is, are advertising a discovery key). Otherwise the old code is used. So far the new code only communicates over DERP as proof that the new code paths are wired up. None of the actually discovery messaging is implemented yet. Support for discovery (generating and advertising a key) are still behind an environment variable for now. Updates #483	4 years ago
Brad Fitzpatrick	103c06cc68	wgengine/magicsock: open discovery naclbox messages from known peers ... And track known peers. Doesn't yet do anything with the messages. (nor does it send any yet) Start of docs on the message format. More will come in subsequent changes. Updates #483	4 years ago
Brad Fitzpatrick	23e74a0f7a	wgengine, magicsock, tstun: don't regularly STUN when idle (mobile only for now) ... If there's been 5 minutes of inactivity, stop doing STUN lookups. That means NAT mappings will expire, but they can resume later when there's activity again. We'll do this for all platforms later. Updates tailscale/corp#320 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	fe50cd0c48	ipn, wgengine: plumb NetworkMap down to magicsock ... Now we can have magicsock make decisions based on tailcfg.Debug settings sent by the server. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	53fb25fc2f	all: generate discovery key, plumb it around ... Not actually used yet. Updates #483	5 years ago
Brad Fitzpatrick	abd79ea368	derp: reduce DERP memory use; don't require callers to pass in memory to use ... The magicsock derpReader was holding onto 65KB for each DERP connection forever, just in case. Make the derp{,http}.Client be in charge of memory instead. It can reuse its bufio.Reader buffer space.	5 years ago
Brad Fitzpatrick	280e8884dd	wgengine/magicsock: limit redundant log spam on packets from low-pri addresses ... Fixes #407 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	9e5d79e2f1	wgengine/magicsock: drop a bytes.Buffer sync.Pool, use logger.ArgWriter instead	5 years ago
Brad Fitzpatrick	db2a216561	wgengine/magicsock: don't log on UDP send errors if address family known missing ... Fixes #376	5 years ago
Brad Fitzpatrick	9e3ad4f79f	net/netns: add package for start of network namespace support ... And plumb in netcheck STUN packets. TODO: derphttp, logs, control. Updates #144 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	a428656280	wgengine/magicsock: don't report v4 localhost addresses on IPv6-only systems ... Updates #376	5 years ago
Avery Pennarun	30e5c19214	magicsock: work around race condition initializing .Regions[]. ... Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Brad Fitzpatrick	b0c10fa610	stun, netcheck: move under net	5 years ago
Brad Fitzpatrick	e6b84f2159	all: make client use server-provided DERP map, add DERP region support ... Instead of hard-coding the DERP map (except for cmd/tailscale netcheck for now), get it from the control server at runtime. And make the DERP map support multiple nodes per region with clients picking the first one that's available. (The server will balance the order presented to clients for load balancing) This deletes the stunner package, merging it into the netcheck package instead, to minimize all the config hooks that would've been required. Also fix some test flakes & races. Fixes #387 (Don't hard-code the DERP map) Updates #388 (Add DERP region support) Fixes #399 (wgengine: flaky tests) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	e6d0c92b1d	wgengine/magicsock: clean up earlier fix a bit ... Move WaitReady from fc88e34f42 into the test code, and keep the derp-reading goroutine named for debugging.	5 years ago
Avery Pennarun	fc88e34f42	wgengine/magicsock/tests: wait for home DERP connection before sending packets. ... This fixes an elusive test flake. Fixes #161. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	08acb502e5	Add tstest.PanicOnLog(), and fix various problems detected by this. ... If a test calls log.Printf, 'go test' horrifyingly rearranges the output to no longer be in chronological order, which makes debugging virtually impossible. Let's stop that from happening by making log.Printf panic if called from any module, no matter how deep, during tests. This required us to change the default error handler in at least one http.Server, as well as plumbing a bunch of logf functions around, especially in magicsock and wgengine, but also in logtail and backoff. To add insult to injury, 'go test' also rearranges the output when a parent test has multiple sub-tests (all the sub-test's t.Logf is always printed after all the parent tests t.Logf), so we need to screw around with a special Logf that can point at the "current" t (current_t.Logf) in some places. Probably our entire way of using subtests is wrong, since 'go test' would probably like to run them all in parallel if you called t.Parallel(), but it definitely can't because the're all manipulating the shared state created by the parent test. They should probably all be separate toplevel tests instead, with common setup/teardown logic. But that's a job for another time. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Brad Fitzpatrick	fefd7e10dc	types/structs: add structs.Incomparable annotation, use it where applicable ... Shotizam before and output queries: sqlite> select sum(size) from bin where func like 'type..%'; 129067 => 120216	5 years ago
Brad Fitzpatrick	e1526b796e	ipn: don't listen on the unspecified address in test ... To avoid the Mac firewall dialog of (test) death. See 4521a59f30 which I added to help debug this.	5 years ago
Brad Fitzpatrick	18017f7630	ipn, wgengine/magicsock: be more idle when in Stopped state with no peers ... (Previously as #288, but with some more.) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	9669b85b41	wgengine/magicsock: wait for endpoint updater goroutine when closing. ... Fixes #204. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	268d331cb5	wgengine/magicsock: prune key.Public-keyed on peer removals ... Fixes #215	5 years ago
Brad Fitzpatrick	00d053e25a	wgengine/magicsock: fix slow memory leak as peer endpoints move around ... Updates #215	5 years ago
Brad Fitzpatrick	7fc97c5493	wgengine/magicsock: use netaddr more ... In prep for deleting from the ever-growing maps.	5 years ago
Brad Fitzpatrick	6fb30ff543	wgengine/magicsock: start using inet.af/netaddr a bit	5 years ago
Brad Fitzpatrick	a7e7c7b548	wgengine/magicsock: close derp connections on rebind ... Fixes #276 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	614261d00d	wgengine/magicsock: reset AddrSet states on Rebind ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Blake Gentry	e19287f60f	wgengine/magicsock: fix Conn docs type reference ... The docs on magicsock.Conn stated that they implemented the wireguard/device.Bind interface, yet this type does not exist. In reality, the Conn type implements the wireguard/conn.Bind interface. I also fixed a small typo in the same file. Signed-off-by: Blake Gentry <blakesgentry@gmail.com>	5 years ago
Brad Fitzpatrick	322499473e	cmd/tailscaled, wgengine, ipn: add /debug/ipn handler with world state ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	2d48f92a82	wgengine/magicsock: re-stun every [20,27] sec, not 28 ... 28 is cutting it close, and we think jitter will help some spikes we're seeing. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	577f321c38	wgengine/magicsock: revise derp fallback logic ... Revision to earlier 6284454ae5 Don't be sticky if we have no peers. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	6284454ae5	wgengine/magicsock: if UDP blocked, pick DERP where most peers are ... Updates #207 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	d321190578	wgengine/magicsock: stringify [IPv6]:port normally in AddrSet.String	5 years ago
Brad Fitzpatrick	3c3ea8bc8a	wgengine/magicsock: finish IPv6 transport support ... DEBUG_INCLUDE_IPV6=1 is still required, but works now. Updates #18 (fixes it, once env var gate is removed)	5 years ago
Brad Fitzpatrick	82ed7e527e	wgengine/magicsock: remove log allocation ... This was the whole point but I goofed at the last line.	5 years ago
Brad Fitzpatrick	8454bbbda5	wgengine/magicsock: more logging improvements ... * remove endpoint discovery noise when results unchanged * consistently spell derp nodes as "derp-N" * replace "127.3.3.40:" with "derp-" in CreateEndpoint log output * stop early DERP setup before SetPrivateKey is called; it just generates log nosie * fix stringification of peer ShortStrings (it had an old %x on it, rendering it garbage) * describe why derp routes are changing, with one of: shared home, their home, our home, alt	5 years ago
Brad Fitzpatrick	680311b3df	wgengine/magicsock: fix few remaining logs without package prefix	5 years ago
Brad Fitzpatrick	c473927558	wgengine/magicsock: clean up, add, improve DERP logs	5 years ago
Brad Fitzpatrick	ea9310403d	wgengine/magicsock: re-STUN on DERP connection death ... Fixes #201	5 years ago
Brad Fitzpatrick	1ab5b31c4b	derp, magicsock: send new "peer gone" frames when previous sender disconnects ... Updates #150 (not yet enabled by default in magicsock) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	b6f77cc48d	wgengine/magicsock: return early, outdent in derpWriteChanOfAddr	5 years ago
Brad Fitzpatrick	dd31285ad4	wgengine/magicsock: send IPv6 using pconn6, if available ... In prep for IPv6 support. Nothing should make it this far yet.	5 years ago
Brad Fitzpatrick	af277a6762	controlclient, magicsock: add debug knob to request IPv6 endpoints ... Add opt-in method to request IPv6 endpoints from the control plane. For now they should just be skipped. A previous version of this CL was unconditional and reportedly had problems that I can't reproduce. So make it a knob until the mystery is solved. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	221e7d7767	wgengine/magicsock: make log message include DERP port (node)	5 years ago
Brad Fitzpatrick	33bdcabf03	wgengine/magicsock: call stun callback w/ only valid part of STUN packet	5 years ago
David Anderson	0be475ba46	Revert "tailcfg, controlclient, magicsock: request IPv6 endpoints, but ignore them" ... Breaks something deep in wireguard or magicsock's brainstem, no packets at all can flow. All received packets fail decryption with "invalid mac1". This reverts commit 94024355ed. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	94024355ed	tailcfg, controlclient, magicsock: request IPv6 endpoints, but ignore them ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	60ea635c6d	wgengine/magicsock: delete inaccurate comment ... I meant to include this in the earlier commit.	5 years ago
Brad Fitzpatrick	a184e05290	wgengine/magicsock: listen on udp6, use it for STUN, report endpoint ... More steps towards IPv6 transport. We now send it to tailcontrol, which ignores it. But it doesn't actually actually support IPv6 yet (outside of STUN). Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	7caa288213	wgengine/magicsock: rename pconn field to pconn4, in prep for pconn6	5 years ago
David Crawshaw	addbdce296	wgengine, ipn: include number of active DERPs in status ... Use this when making the ipn state transition from Starting to Running. This way a network of quiet nodes with no active handshaking will still transition to Active. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Crawshaw	1ad78ce698	magicsock: reconnect to home DERP on key change ... Typically the home DERP server is found and set on startup before magicsock's SetPrivateKey can be called, so no DERP connection is established. Make sure one is by kicking the home DERP tires in SetPrivateKey. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Crawshaw	455ba751d9	magicsock: start connection to HOME derp immediately ... The code as written intended to do this, but it repeated the comparison of derpNum and c.myDerp after c.myDerp had been updated, so it never executed. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Anderson	315a5e5355	scripts: add a license header checker. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	db2436c7ff	wgengine/magicsock: don't interrupt endpoint updates, merge all mutex into one ... Before, endpoint updates were constantly being interrupted and resumed on Linux due to tons of LinkChange messages from over-zealous Linux netlink messages (from router_linux.go) Now that endpoint updates are fast and bounded in time anyway, just let them run to completion, but note that another needs to be scheduled after. Now logs went from pages of noise to just: root@taildoc:~# grep -i -E 'stun|endpoint update' log 2020/03/13 08:51:29 magicsock.Conn: starting endpoint update (initial) 2020/03/13 08:51:30 magicsock.Conn.ReSTUN: endpoint update active, need another later ("link-change-minor") 2020/03/13 08:51:31 magicsock.Conn: starting endpoint update (link-change-minor) 2020/03/13 08:51:31 magicsock.Conn.ReSTUN: endpoint update active, need another later ("link-change-minor") 2020/03/13 08:51:33 magicsock.Conn: starting endpoint update (link-change-minor) 2020/03/13 08:51:33 magicsock.Conn.ReSTUN: endpoint update active, need another later ("link-change-minor") 2020/03/13 08:51:35 magicsock.Conn: starting endpoint update (link-change-minor) 2020/03/13 08:51:35 magicsock.Conn.ReSTUN: endpoint update active, need another later ("link-change-minor") Or, seen in another run: 2020/03/13 08:45:41 magicsock.Conn: starting endpoint update (periodic) 2020/03/13 08:46:09 magicsock.Conn: starting endpoint update (periodic) 2020/03/13 08:46:21 magicsock.Conn: starting endpoint update (link-change-major) 2020/03/13 08:46:37 magicsock.Conn: starting endpoint update (periodic) 2020/03/13 08:47:05 magicsock.Conn: starting endpoint update (periodic) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	db31550854	wgengine: don't Reconfig on boring link changes ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	bc73dcf204	wgengine/magicsock: don't block in Send waiting for derphttp.Send ... Fixes #137 Updates #109 Updates #162 Updates #163 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	8807913be9	wgengine/magicsock: wait for previous DERP goroutines to end before new ones ... Updates #109 (hopefully fixes, will wait for graphs to be happy) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	eff6dcdb4e	wgengine/magicsock: log more about why we're re-STUNing	5 years ago
Brad Fitzpatrick	b3ddf51a15	wgengine/magicsock: add a pointer value for logging ... Updates #109 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Crawshaw	7ec54e0064	wgengine/magicsock: remove TODO ... The TODO above derphttp.NewClient suggests it does network I/O, but the derphttp client connects lazily and so creating one is very cheap. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	01b4bec33f	stunner: re-do how Stunner works ... It used to make assumptions based on having Anycast IPs that are super near. Now we're intentionally going to a bunch of different distant IPs to measure latency. Also, optimize how the hairpin detection works. No need to STUN on that socket. Just use that separate socket for sending, once we know the other UDP4 socket's endpoint. The trick is: make our test probe also a STUN packet, so it fits through magicsock's existing STUN routing. This drops netcheck from ~5 seconds to ~250-500ms. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	86baf60bd4	wgengine/magicsock: synchronize epUpdate cleanup on shutdown. ... Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	023df9239e	Move linkstate boring change filtering to magicsock ... So we can at least re-STUN on boring updates. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	a265d7cbff	wgengine/magicsock: in STUN-disabled test mode, let endpoint discovery proceed	5 years ago
Brad Fitzpatrick	5c1e443d34	wgengine/monitor: don't call LinkChange when interfaces look unchanged ... Basically, don't trust the OS-level link monitor to only tell you interesting things. Sanity check it. Also, move the interfaces package into the net directory now that we have it.	5 years ago
Brad Fitzpatrick	39c0ae1dba	derp/derpmap: new DERP config package, merge netcheck into magicsock more ... Fixes #153 Updates #162 Updates #163 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	4800926006	wgengine/magicsock: add AddrSet appendDests+UpdateDst tests	5 years ago
David Anderson	bb93d7aaba	wgengine/magicsock: plumb logf throughout, and expose in Options. ... Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	f42b9b6c9a	wgengine/magicsock: don't discard UDP packet on UDP+DERP race ... Fixes #155 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	f265603110	wgengine/magicsock: fix data race in ReceiveIPv4. ... The UDP reader goroutine was clobbering `n` and `err` from the main goroutine, whose accesses are not synchronized the way `b` is. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	77354d4617	wgengine/magicsock: unblock wireguard-go's read on magicsock shutdown. ... wireguard-go closes magicsock, and expects this to unblock reads so that its internal goroutines can wind down. We were incorrectly blocking the read indefinitey and breaking this contract. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	fdee5fb639	wgengine/magicsock: don't mutexly reach inside Conn to tweak DERP settings. ... Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	61d83f759b	wgengine/magicsock: remove redundant derpMagicIP comparison ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	ef31dd7bb5	wgengine/magicsock: check all 3 fast paths independently. ... The previous code would skip the DERP short-circuit if roamAddr was set, which is not what we wanted. More generally, hitting any of the fast path conditions is a direct return, so we can just have 3 standalone branches rather than 'else if' stuff. Signed-Off-By: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	05a52746a4	wgengine/magicsock: fix destination selection logic to work with DERP. ... The effect is subtle: when we're not spraying packets, and have not yet figured out a curAddr, and we're not spraying, we end up sending to whatever the first IP is in the iteration order. In English, that means "when we have no idea where to send packets, and we've given up on sending to everyone, just send to the first addr we see in the list." This is, in general, what we want, because the addrs are in sorted preference order, low to high, and DERP is the least preferred destination. So, when we have no idea where to send, send to DERP, right? ... Except for very historical reasons, appendDests iterated through addresses in _reverse_ order, most preferred to least preferred. crawshaw@ believes this was part of the earliest handshaking algorithm magicsock had, where it slowly iterated through possible destinations and poked handshakes to them one at a time. Anyway, because of this historical reverse iteration, in the case described above of "we have no idea where to send", the code would end up sending to the _most_ preferred candidate address, rather than the _least_ preferred. So when in doubt, we'd end up firing packets into the blackhole of some LAN address that doesn't work, and connectivity would not work. This case only comes up if all your non-DERP connectivity options have failed, so we more or less failed to detect it because we didn't have a pathological test box deployed. Worse, codependent bug 2839854994 made DERP accidentally work sometimes anyway by incorrectly exploiting roamAddr behavior, albeit at the cost of making DERP traffic symmetric. In fixing DERP to once again be asymmetric, we effectively removed the bandaid that was concealing this bug. Signed-Off-By: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	97e58ad44d	wgengine/magicsock: only set addrByKey once in CreateEndpoint. ... Signed-Off-By: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	fbab12c94c	wgengine/magicsock: skip netcheck if external STUN aren't in use ... Updates #146 (not a complete fix yet probably)	5 years ago
Brad Fitzpatrick	fe0051fafd	wgengine/magicsock: expand AddrSet.addrs comment	5 years ago
David Anderson	2839854994	wgengine/magicsock: never set a DERP server as a roamAddr. ... DERP traffic is asymmetric by design, with nodes always sending to their peer's home DERP server. However, if roamAddr is set, magicsock will always push data there, rather than let DERP server selection do its thing, so we end up accidentally creating a symmetric flow. Signed-Off-By: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	4f5c0da1ae	wgengine/magicsock: log when home DERP server changes.	5 years ago
Brad Fitzpatrick	6978b93bdd	derp, magicsock: track home (preferred) vs visiting connections for stats	5 years ago
Brad Fitzpatrick	12b77f30ad	wgengine/magicsock: close stale DERP connections	5 years ago
Brad Fitzpatrick	2cff9016e4	net/dnscache: add overly simplistic DNS cache package for selective use ... I started to write a full DNS caching resolver and I realized it was overkill and wouldn't work on Windows even in Go 1.14 yet, so I'm doing this tiny one instead for now, just for all our netcheck STUN derp lookups, and connections to DERP servers. (This will be caching a exactly 8 DNS entries, all ours.) Fixes #145 (can be better later, of course)	5 years ago
Brad Fitzpatrick	a36ccb8525	wgengine/magicsock: actually add to the activeDerp map ... Fixes bug just introduced in 8f9849c140; not tested enough :(	5 years ago
Brad Fitzpatrick	8f9849c140	wgengine/magicsock: collapse three DERP maps down into one	5 years ago
Brad Fitzpatrick	40ebba1373	magicsock: use [unexpected] convention more ... Fixes #136 (not entirely, but we have a convention now)	5 years ago
Brad Fitzpatrick	848a2bddf0	wgengine/magicsock: update set of DERP nodes	5 years ago
David Crawshaw	7932481b95	magicsock: lookup AddrSet by key from DERP ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	eac62ec5ff	ipn, wgengine/magicsock: add ipn.Prefs.DisableDERP bool ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	bf704a5218	derp: protocol negotiation, add v2: send src pub keys to clients in packets ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Crawshaw	a33419167b	magicsock: plumb through derpTLSConfig variable (for testing) ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Crawshaw	34859f8e7d	wgengine, magicsock: add a CreateBind method ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	b27d4c017a	magicsock, wgengine, ipn, controlclient: plumb regular netchecks to map poll ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	724c37fb41	wgengine/magicsock: start tracking nearest DERP node	5 years ago
Brad Fitzpatrick	4675c70464	wgengine/magicsock: check STUN regularly	5 years ago
Brad Fitzpatrick	bc7bc43fb8	magicsock, interfaces: move some code from magicsock to interfaces	5 years ago
Brad Fitzpatrick	af7a01d6f0	wgengine/magicsock: drop donec channel, rename epUpdateCtx to serve its purpose	5 years ago
David Crawshaw	cc4afa775f	magicsock: rate limit send error log messages ... The x/time/rate dependency adds 24kb to tailscaled binary size. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Crawshaw	0752c77dc2	magicsock: keep DERP magic IPs out of the address map ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Crawshaw	c6550135d5	magicsock: remove the index from indexedAddrs ... The value predates the introduction of AddrSet which replaces the index by tracking curAddr directly. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	1abf2da392	wgengine/magicsock: reset favorite address on handshakes ... Updates #92 (not a complete fix; could be better/faster?) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	67ede8d6d2	wgengine, magicsock: fix SetPrivateKey data race ... Updates #112 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	c185e6b4b0	stunner: support IPv6, add latency info to callbacks, use unique TxIDs per retry ... And some more docs. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Crawshaw	a6ad3c46e2	magicsock: spray some normal packets after a handshake ... In particular, this is designed to catch the case where a HandshakeInitiation packet is sent out but the intermediate NATs have not been primed, so the packet passes over DERP. In that case, the HandshakeResponse also comes back over DERP, and the connection proceeds via DERP without ever trying to punch through the NAT. With this change, the HandshakeResponse (which was sprayed out and so primed one NAT) triggers an UpdateDst, which triggers the extra spray logic. (For this to work, there has to be an initial supply of packets to send on to a peer for the three seconds following a handshake. The source of these packets is left as a future exercise.) Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	8696b17b5f	wgengine/magicsock: turn off DERP log spamminess by default ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	7a3b91390b	wgengine/magicsock: fix crash in Send when Endpoint isn't an AddrSet ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Crawshaw	868cfae84f	wgengine, magicsock: adjust for wireguard-go conn/device package split ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	cc7b9b0dff	control/controlclient: fix priority of DERP server, add comment	5 years ago
Brad Fitzpatrick	c02f4b5a1f	control/controlclient: add temporary mechanism to force derp on ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	525bf1f3d2	wgengine/magicsock: remember fixed port number preference ... So LinkChange events rebind to the same port when possible.	5 years ago
Brad Fitzpatrick	379a3125fd	derp, wgengine/magicsock: support more than just packets from Client.Recv ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	d298d5b1f8	wgengine/magicsock: support multiple derp servers, and not just for handshakes ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	fd1aa4f7f6	wgengine/magicsock: add a reSTUN method ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	e06ca40650	wgengine, magicsock, derp: misc cleanups, docs ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	259406e797	derp: move away from [32]byte key types ... And some minor cleanup in the process. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	587c3fcac4	control/controlclient, wgengine/magicsock: misc cleanups ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Crawshaw	87334fb332	wgengine, controlclient: fewer pointers in wgcfg key types ... Signed-off-by: David Crawshaw <david@zentus.com>	5 years ago
Earl Lee	a8d8b8719a	Move Linux client & common packages into a public repo.	5 years ago