tailscale

Commit Graph

Author	SHA1	Message	Date
Aaron Klotz	9687f3700d	net/dns: deal with Windows wsl.exe hangs Despite the fact that WSL configuration is still disabled by default, we continue to log the machine's list of WSL distros as a diagnostic measure. Unfortunately I have seen the "wsl.exe -l" command hang indefinitely. This patch adds a (more than reasonable) 10s timeout to ensure that tailscaled does not get stuck while executing this operation. I also modified the Windows implementation of NewOSConfigurator to do the logging asynchronously, since that information is not required in order to continue starting up. Fixes #7476 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
David Crawshaw	96a555fc5a	net/socks5: add password auth support Conforms to RFC 1929. To support Java HTTP clients via libtailscale, who offer no other reliable hooks into their sockets. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Andrew Dunham	f6cd24499b	net/portmapper: relax source port check for UPnP responses Per a packet capture provided, some gateways will reply to a UPnP discovery packet with a UDP packet with a source port that does not come from the UPnP port. Accept these packets with a log message. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I5d4d5b2a0275009ed60f15c20b484fe2025d094b	3 years ago
Andrew Dunham	51eb0b2cb7	net/portmapper: send UPnP protocol in upper-case We were previously sending a lower-case "udp" protocol, whereas other implementations like miniupnp send an upper-case "UDP" protocol. For compatibility, use an upper-case protocol instead. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I4aed204f94e4d51b7a256d29917af1536cb1b70f	3 years ago
Andrew Dunham	d379a25ae4	net/portmapper: don't pick external ports below 1024 Some devices don't let you UPnP portmap a port below 1024, so let's just avoid that range of ports entirely. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib7603b1c9a019162cdc4fa21744a2cae48bb1d86	3 years ago
Maisem Ali	1a30b2d73f	all: use tstest.Replace more Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Andrew Dunham	2d3ae485e3	net/interfaces: add better test for LikelyHomeRouterIP Return a mock set of interfaces and a mock gateway during this test and verify that LikelyHomeRouterIP returns the outcome we expect. Also verify that we return an error if there are no IPv4 addresses available. Follow-up to #7447 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8f06989e7f1f0bebd108861cbff17b820ed2e6e4	3 years ago
Maisem Ali	b9ebf7cf14	tstest: add method to Replace values for tests We have many function pointers that we replace for the duration of test and restore it on test completion, add method to do that. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Andrew Dunham	12100320d2	net/interfaces: always return an IPv4 LikelyHomeRouterIP We weren't filtering out IPv6 addresses from this function, so we could be returning an IPv4 gateway IP and an IPv6 self IP. Per the function comments, only return IPv4 addresses for the self IP. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: If19a4aadc343fbd4383fc5290befa0eff006799e	3 years ago
Andrew Dunham	73fa7dd7af	util/slicesx: add package for generic slice functions, use Now that we're using rand.Shuffle in a few locations, create a generic shuffle function and use it instead. While we're at it, move the interleaveSlices function to the same package for use. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I0b00920e5b3eea846b6cedc30bd34d978a049fd3	3 years ago
Andrew Dunham	3f8e8b04fd	cmd/tailscale, cmd/tailscaled: move portmapper debugging into tailscale CLI The debug flag on tailscaled isn't available in the macOS App Store build, since we don't have a tailscaled binary; move it to the 'tailscale debug' CLI that is available on all platforms instead, accessed over LocalAPI. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7	3 years ago
Mihai Parparita	3e71e0ef68	net/sockstats: remove explicit dependency on wgengine/monitor Followup to #7177 to avoid adding extra dependencies to the CLI. We instead declare an interface for the link monitor. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Andrew Dunham	27575cd52d	net/dnsfallback: shuffle returned IPs This ensures that we're trying multiple returned IPs, since the DERP servers return the same response to all queries. This should increase the chances that we eventually reach a working IP. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ie8d4fb93df96da910fae49ae71bf3e402b9fdecc	3 years ago
Mihai Parparita	9cb332f0e2	sockstats: instrument networking code paths Uses the hooks added by tailscale/go#45 to instrument the reads and writes on the major code paths that do network I/O in the client. The convention is to use "<package>.<type>:<label>" as the annotation for the responsible code path. Enabled on iOS, macOS and Android only, since mobile platforms are the ones we're most interested in, and we are less sensitive to any throughput degradation due to the per-I/O callback overhead (macOS is also enabled for ease of testing during development). For now just exposed as counters on a /v0/sockstats PeerAPI endpoint. We also keep track of the current interface so that we can break out the stats by interface. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Mihai Parparita	780c56e119	ipn/ipnlocal: add delegated interface information to /interfaces PeerAPI handler Exposes the delegated interface data added by #7248 in the debug endpoint. I would have found it useful when working on that PR, and it may be handy in the future as well. Also makes the interfaces table slightly easier to parse by adding borders to it. To make then nicer-looking, the CSP was relaxed to allow inline styles. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
David Anderson	8b2ae47c31	version: unexport all vars, turn Short/Long into funcs The other formerly exported values aren't used outside the package, so just unexport them. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Mihai Parparita	fa932fefe7	net/interfaces: redo how we get the default interface on macOS and iOS With #6566 we added an external mechanism for getting the default interface, and used it on macOS and iOS (see tailscale/corp#8201). The goal was to be able to get the default physical interface even when using an exit node (in which case the routing table would say that the Tailscale utun* interface is the default). However, the external mechanism turns out to be unreliable in some cases, e.g. when multiple cellular interfaces are present/toggled (I have occasionally gotten my phone into a state where it reports the pdp_ip1 interface as the default, even though it can't actually route traffic). It was observed that `ifconfig -v` on macOS reports an "effective interface" for the Tailscale utn* interface, which seems promising. By examining the ifconfig source code, it turns out that this is done via a SIOCGIFDELEGATE ioctl syscall. Though this is a private API, it appears to have been around for a long time (e.g. it's in the 10.13 xnu release at https://opensource.apple.com/source/xnu/xnu-4570.41.2/bsd/net/if_types.h.auto.html) and thus is unlikely to go away. We can thus use this ioctl if the routing table says that a utun* interface is the default, and go back to the simpler mechanism that we had before #6566. Updates #7184 Updates #7188 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Mihai Parparita	21fda7f670	net/routetable: include unknown flags in the routetable doctor output As part of the work on #7248 I wanted to know all of the flags on the RouteMessage struct that we get back from macOS. Though it doesn't turn out to be useful (when using an exit node/Tailscale is the default route, the flags for the physical interface routes are the same), it still seems useful from a debugging/comprehensiveness perspective. Adds additional Darwin flags that were output once I enabled this mode. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Tom DNetto	2ca6dd1f1d	wgengine: start logging DISCO frames to pcap stream Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Colin Adler	3c107ff301	net/connstats: fix ticker in NewStatistics (#7225 ) `:=` was accidentally used, so `maxPeriod` never worked. Signed-off-by: Colin Adler <colin1adler@gmail.com>	3 years ago
Mihai Parparita	62f4df3257	net/interfaces, net/netns: add node attributes to control default interface getting and binding With #6566 we started to more aggressively bind to the default interface on Darwin. We are seeing some reports of the wrong cellular interface being chosen on iOS. To help with the investigation, this adds to knobs to control the behavior changes: - CapabilityDebugDisableAlternateDefaultRouteInterface disables the alternate function that we use to get the default interface on macOS and iOS (implemented in tailscale/corp#8201). We still log what it would have returned so we can see if it gets things wrong. - CapabilityDebugDisableBindConnToInterface is a bigger hammer that disables binding of connections to the default interface altogether. Updates #7184 Updates #7188 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Brad Fitzpatrick	2477fc4952	net/netutil: only check Linux sysctls w/ procfs, assume absent means false Fixes #7217 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Tom DNetto	99b9d7a621	all: implement pcap streaming for datapath debugging Updates: tailscale/corp#8470 Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Mihai Parparita	0e3fb91a39	net/dns/resolver: remove maxDoHInFlight It was originally added to control memory use on iOS (#2490), but then was relaxed conditionally when running on iOS 15 (#3098). Now that we require iOS 15, there's no need for the limit at all, so simplify back to the original state. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Mihai Parparita	b6908181ff	net/tshttpproxy: more directly use Transport proxy CONNECT hooks GetProxyConnectHeader (golang/go#41048) was upstreamed in Go 1.16 and OnProxyConnectResponse (golang/go#54299) in Go 1.20, thus we no longer need to guard their use by the tailscale_go build tag. Updates #7123 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Andrew Dunham	880a41bfcc	net/dns/resolver: add envknob to debug exit node DNS queries on on Windows Add the envknob TS_DEBUG_EXIT_NODE_DNS_NET_PKG, which enables more verbose debug logging when calling the handleExitNodeDNSQueryWithNetPkg function. This function is currently only called on Windows and Android. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ieb3ca7b98837d7dc69cd9ca47609c1c52e3afd7b	3 years ago
Brad Fitzpatrick	03645f0c27	net/{netns,netstat}: use new x/sys/cpu.IsBigEndian See golang/go#57237 Change-Id: If47ab6de7c1610998a5808e945c4177c561eab45 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Andrew Dunham	2755f3843c	health, net/tlsdial: add healthcheck for self-signed cert When we make a connection to a server, we previously would verify with the system roots, and then fall back to verifying with our baked-in Let's Encrypt root if the system root cert verification failed. We now explicitly check for, and log a health error on, self-signed certificates. Additionally, we now always verify against our baked-in Let's Encrypt root certificate and log an error if that isn't successful. We don't consider this a health failure, since if we ever change our server certificate issuer in the future older non-updated versions of Tailscale will no longer be healthy despite being able to connect. Updates #3198 Change-Id: I00be5ceb8afee544ee795e3c7a2815476abc4abf Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	3 years ago
Brad Fitzpatrick	cf8dd7aa09	all: use Go 1.20's bytes.Clone Updates #7123 Updates #6257 (more to do in other repos) Change-Id: I073e2a6d81a5d7fbecc29caddb7e057ff65239d0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	b1248442c3	all: update to Go 1.20, use strings.CutPrefix/Suffix instead of our fork Updates #7123 Updates #5309 Change-Id: I90bcd87a2fb85a91834a0dd4be6e03db08438672 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	5bba65e978	net/memnet: rename from net/nettest This is just #cleanup to resolve a TODO Also add a package doc. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Will Norris	947c14793a	all: update tools that manage copyright headers Update all code generation tools, and those that check for license headers to use the new standard header. Also update copyright statement in LICENSE file. Fixes #6865 Signed-off-by: Will Norris <will@tailscale.com>	3 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	3 years ago
Andrew Dunham	50da265608	net/netns: add post-review comments Follow-up to #7065 with some comments from Brad's review. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ia1219f4fa25479b2dada38ffe421065b408c5954	3 years ago
Brad Fitzpatrick	2fc8de485c	net/netstat: document the Windows netstat code a bit more And defensively bound allocation. Updates tailscale/corp#8878 Change-Id: Iaa07479ea2ea28ee1ac3326ab025046d6d785b00 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Aaron Klotz	4a869048bf	net/netstat: add nil checks to Windows OSMetadata implementation The API documentation does claim to output empty strings under certain conditions, but we're sometimes seeing nil pointers in the wild, not empty strings. Fixes https://github.com/tailscale/corp/issues/8878 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
Andrew Dunham	2703d6916f	net/netns: add functionality to bind outgoing sockets based on route table When turned on via environment variable (off by default), this will use the BSD routing APIs to query what interface index a socket should be bound to, rather than binding to the default interface in all cases. Updates #5719 Updates #5940 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib4c919471f377b7a08cd3413f8e8caacb29fee0b	3 years ago
Andrew Dunham	44d73ce932	ipn/ipnlocal, net/dnscache: allow configuring dnscache logging via capability This allows users to temporarily enable/disable dnscache logging via a new node capability, to aid in debugging strange connectivity issues. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I46cf2596a8ae4c1913880a78d0033f8b668edc08	3 years ago
Brad Fitzpatrick	d5100e0910	net/connstats: mark TestConcurrent as flaky Updates #7030 Change-Id: Ic46da5e5690b90b95028a68a3cf967ad86881e28 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	3addcacfe9	net/dns: fix recently added URL scheme from http to https I typoed/brainoed in the earlier `3582628691` Change-Id: Ic198a6f9911f195d9da9fc5259b5784a4b15e5e3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
andig	5f96d6211a	Remove redundant type declaration Signed-off-by: andig <cpuidle@gmx.de>	3 years ago
Brad Fitzpatrick	3582628691	net/dns/resolvconffile: link to FAQ about resolv.conf being overwritten Add link to new http://tailscale.com/s/resolvconf-overwrite page, added in tailscale/tailscale-www#2243 Change-Id: I9718399487f2ed18bf1a112581fd168aea30f232 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	6d85a94767	net/{packet,tstun}: fix typo in test helper docs Change-Id: Ifc1684fe77c7d2585e049e0dfd7340910c47a67a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c1a2e2c380	net/{packet,tstun},wgengine/filter: fix unknown IP protocol handling `01b90df2fa` added SCTP support before (with explicit parsing for ports) and `69de3bf7bf` tried to add support for arbitrary IP protocols (as long as the ACL permited a port of "", since we might not know how to find ports from an arbitrary IP protocol, if it even has such a concept). But apparently that latter commit wasn't tested end-to-end enough. It had a lot of tests, but the tests made assumptions about layering that either weren't true, or regressed since 1.20. Notably, it didn't remove the (Filter).pre bidirectional filter that dropped all "unknown" protocol packets both leaving and entering, even if there were explicit protocol matches allowing them in. Also, don't map all unknown protocols to 0. Keep their IP protocol number parsed so it's matchable by later layers. Only reject illegal things. Fixes #6423 Updates #2162 Updates #2163 Change-Id: I9659b3ece86f4db51d644f9b34df78821758842c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Jordan Whited	25a0091f69	net/portmapper: relax handling of UPnP resp (#6946 ) Gateway devices operating as an HA pair w/VRRP or CARP may send UPnP replies from static addresses rather than the floating gateway address. This commit relaxes our source address verification such that we parse responses from non-gateway IPs, and re-point the UPnP root desc URL to the gateway IP. This ensures we are still interfacing with the gateway device (assuming L2 security intact), even though we got a root desc from a non-gateway address. This relaxed handling is required for ANY port mapping to work on certain OPNsense/pfsense distributions using CARP at the time of writing, as miniupnpd may only listen on the static, non-gateway interface address for PCP and PMP. Fixes #5502 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 years ago
Tom DNetto	2ac5474be1	net/flowtrack,wgengine/filter: refactor Cache to use generics Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	673b3d8dbd	net/dns,userspace: remove unused DNS paths, normalize query limit on iOS With `a42a594bb3`, iOS uses netstack and hence there are no longer any platforms which use the legacy MagicDNS path. As such, we remove it. We also normalize the limit for max in-flight DNS queries on iOS (it was 64, now its 256 as per other platforms). It was 64 for the sake of being cautious about memory, but now we have 50Mb (iOS-15 and greater) instead of 15Mb so we have the spare headroom. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
James Tucker	b2c55e62c8	net/tlsdial,tstest,version: use go command from $PATH Go now includes the GOROOT bin directory in $PATH while running tests and generate, so it is no longer necessary to construct a path using runtime.GOROOT(). Fixes #6689 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	ea70aa3d98	net/dns/resolvconffile: fix handling of multiple search domains Fixes #6875 Change-Id: I57eb9312c9a1c81792ce2b5a0a0f254213b05df2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
andig	14e8afe444	go.mod, etc: bump gvisor Fixes #6554 Change-Id: Ia04ae37a47b67fa57091c9bfe1d45a1842589aa8 Signed-off-by: andig <cpuidle@gmx.de>	3 years ago
Andrew Dunham	0372e14d79	net/dns: bump DNS-over-TCP size limit to 4k We saw a few cases where we hit this limit; bumping to 4k seems relatively uncontroversial. Change-Id: I218fee3bc0d2fa5fde16eddc36497a73ebd7cbda Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	3 years ago
Aaron Klotz	296f53524c	netstat, portlist: update Windows implementation to disambiguate svchost processes We change our invocations of GetExtendedTcpTable to request additional information about the "module" responsible for the port. In addition to pid, this output also includes sufficient metadata to enable Windows to resolve process names and disambiguate svchost processes. We store the OS-specific output in an OSMetadata field in netstat.Entry, which portlist may then use as necessary to actually resolve the process/module name. Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
Joe Tsai	d9df023e6f	net/connstats: enforce maximum number of connections (#6760 ) The Tailscale logging service has a hard limit on the maximum log message size that can be accepted. We want to ensure that netlog messages never exceed this limit otherwise a client cannot transmit logs. Move the goroutine for periodically dumping netlog messages from wgengine/netlog to net/connstats. This allows net/connstats to manage when it dumps messages, either based on time or by size. Updates tailscale/corp#8427 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Jordan Whited	55b24009f7	net/tstun: don't return early from a partial tun.Read() (#6745 ) Fixes #6730 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 years ago
Andrew Dunham	3f4d51c588	net/dns: don't send on closed channel when message too large Previously, if a DNS-over-TCP message was received while there were existing queries in-flight, and it was over the size limit, we'd close the 'responses' channel. This would cause those in-flight queries to send on the closed channel and panic. Instead, don't close the channel at all and rely on s.ctx being canceled, which will ensure that in-flight queries don't hang. Fixes #6725 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8267728ac37ed7ae38ddd09ce2633a5824320097	3 years ago
Brad Fitzpatrick	ca08e316af	util/endian: delete package; use updated josharian/native instead See josharian/native#3 Updates golang/go#57237 Change-Id: I238c04c6654e5b9e7d9cfb81a7bbc5e1043a84a2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Jordan Whited	ea5ee6f87c	all: update golang.zx2c4.com/wireguard to github.com/tailscale/wireguard-go (#6692 ) This is temporary while we work to upstream performance work in https://github.com/WireGuard/wireguard-go/pull/64. A replace directive is less ideal as it breaks dependent code without duplication of the directive. Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 years ago
Maisem Ali	eb1adf629f	net/tstun: reuse buffered packet from pool We would call parsedPacketPool.Get() for all packets received in Read/Write. This was wasteful and not necessary, fetch a single *packet.Parsed for all packets. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Jordan Whited	76389d8baf	net/tstun, wgengine/magicsock: enable vectorized I/O on Linux (#6663 ) This commit updates the wireguard-go dependency and implements the necessary changes to the tun.Device and conn.Bind implementations to support passing vectors of packets in tailscaled. This significantly improves throughput performance on Linux. Updates #414 Signed-off-by: Jordan Whited <jordan@tailscale.com> Signed-off-by: James Tucker <james@tailscale.com> Co-authored-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	1598cd0361	net/tsaddr: remove ContainsFunc helpers (they're now in x/exp/slices) x/exp/slices now has ContainsFunc (golang/go#53983) so we can delete our versions. Change-Id: I5157a403bfc1b30e243bf31c8b611da25e995078 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Mihai Parparita	79f3a5d753	net/netns, net/interfaces: explicitly bind sockets to the default interface on all Darwin variants We were previously only doing this for tailscaled-on-Darwin, but it also appears to help on iOS. Otherwise, when we rebind magicsock UDP connections after a cellular -> WiFi interface change they still keep using cellular one. To do this correctly when using exit nodes, we need to exclude the Tailscale interface when getting the default route, otherwise packets cannot leave the tunnel. There are native macOS/iOS APIs that we can use to do this, so we allow those clients to override the implementation of DefaultRouteInterfaceIndex. Updates #6565, may also help with #5156 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Maisem Ali	99aa335923	net/dns: [linux] log and add metric for dnsMode I couldn't find any logs that indicated which mode it was running in so adding that. Also added a gauge metric for dnsMode. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Joe Tsai	2e5d08ec4f	net/connstats: invert network logging data flow (#6272 ) Previously, tstun.Wrapper and magicsock.Conn managed their own statistics data structure and relied on an external call to Extract to extract (and reset) the statistics. This makes it difficult to ensure a maximum size on the statistics as the caller has no introspection into whether the number of unique connections is getting too large. Invert the control flow such that a connstats.Statistics is registered with tstun.Wrapper and magicsock.Conn. Methods on non-nil connstats.Statistics are called for every packet. This allows the implementation of connstats.Statistics (in the future) to better control when it needs to flush to ensure bounds on maximum sizes. The value registered into tstun.Wrapper and magicsock.Conn could be an interface, but that has two performance detriments: 1. Method calls on interface values are more expensive since they must go through a virtual method dispatch. 2. The implementation would need a sync.Mutex to protect the statistics value instead of using an atomic.Pointer. Given that methods on constats.Statistics are called for every packet, we want reduce the CPU cost on this hot path. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Denton Gentry	b8fe89d15f	net/portmapper: add test for Huawei router Updates https://github.com/tailscale/tailscale/issues/6320 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Andrew Dunham	ec790e58df	net/dns: retry overwriting hosts file on Windows Updates #5753 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I60f81bd3325d5ba5383b947c7a7aaa5b14e460f6	3 years ago
Mihai Parparita	33520920c3	all: use strs.CutPrefix and strs.CutSuffix more Updates places where we use HasPrefix + TrimPrefix to use the combined function. Updates #5309 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Aaron Klotz	41e1d336cc	net/dns: change windows DNS manager to use pointer receiver This is safer given that we need to close the NRPT database. Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
Brad Fitzpatrick	e9c851b04b	ipn/ipnlocal: also accept service IP IPv6 literal in brackets for quad100 The fix in `4fc8538e2` was sufficient for IPv6. Browsers (can?) send the IPv6 literal, even without a port number, in brackets. Updates tailscale/corp#7948 Change-Id: I0e429d3de4df8429152c12f251ab140b0c8f6b77 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	22238d897b	all: standardize on PeerAPI Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	fb392e34b5	net/tshttpproxy: don't ignore env-based HTTP proxies after system lookups fail There was a mechanism in tshttpproxy to note that a Windows proxy lookup failed and to stop hitting it so often. But that turns out to fire a lot (no PAC file configured at all results in a proxy lookup), so after the first proxy lookup, we were enabling the "omg something's wrong, stop looking up proxies" bit for awhile, which was then also preventing the normal Go environment-based proxy lookups from working. This at least fixes environment-based proxies. Plenty of other Windows-specific proxy work remains (using WinHttpGetIEProxyConfigForCurrentUser instead of just PAC files, ignoring certain types of errors, etc), but this should fix the regression reported in #4811. Updates #4811 Change-Id: I665e1891897d58e290163bda5ca51a22a017c5f9 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	3114eacbb8	ipn/ipnlocal: don't warn about serve listener failing on IPv6-less machines Fixes #6303 Change-Id: Ie1ce12938f68dfa0533246bbe3b9d7f3e749a243 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	90bd74fc05	net/dns: add a health warning when Linux /etc/resolv.conf is overwritten Change-Id: I925b4d904bc7ed920bc5afee11e6dcb2ffc2fbfd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	001f482aca	net/dns: make "direct" mode on Linux warn on resolv.conf fights Run an inotify goroutine and watch if another program takes over /etc/inotify.conf. Log if so. For now this only logs. In the future I want to wire it up into the health system to warn (visible in "tailscale status", etc) about the situation, with a short URL to more info about how you should really be using systemd-resolved if you want programs to not fight over your DNS files on Linux. Updates #4254 etc etc Change-Id: I86ad9125717d266d0e3822d4d847d88da6a0daaa Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	8e85227059	cmd/tailscale/cli: [set] handle selectively modifying routes/exit node Noticed this while debugging something else, we would reset all routes if either `--advertise-exit-node` or `--advertise-routes` were set. This handles correctly updating them. Also added tests. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	66b4a363bd	net/dns/resolver: add yet another 4via6 DNS form that's hopefully more robust $ dig +short @100.100.100.100 aaaa 10-2-5-3-via-7.foo-bar.ts.net fd7a:115c:a1e0:b1a:0:7:a02:503 $ dig +short @100.100.100.100 aaaa 10-2-5-3-via-7 fd7a:115c:a1e0:b1a:0:7:a02:503 $ ping 10-2-5-3-via-7 PING 10-2-5-3-via-7(fd7a:115c:a1e0:b1a:0:7:a02:503 (fd7a:115c:a1e0:b1a:0:7:a02:503)) 56 data bytes ... Change-Id: Ice8f954518a6a2fca8b2c04da7f31f61d78cdec4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Andrew Dunham	e85613aa2d	net/netcheck: don't use a space in the captive portal challenge The derpers don't allow whitespace in the challenge. Change-Id: I93a8b073b846b87854fba127b5c1d80db205f658 Signed-off-by: Andrew Dunham <andrew@tailscale.com>	3 years ago
Andrew Dunham	c2d7940ec0	cmd/tailscaled, net/tstun: add build tags to omit BIRD and TAP Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I7a39f4eeeb583b73ecffaf4c5f086a38e3a53e2e	3 years ago
Brad Fitzpatrick	036334e913	net/netcheck: deflake (maybe) magicsock's TestNewConn Updates #6207 Change-Id: I51d200d0b42b9a1ef799d0abfc8d4bd871c50cf2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	da8def8e13	all: remove old +build tags The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d57cba8655	net/tshttpproxy: add clientmetrics on Windows proxy lookup paths To collect some data on how widespread this is and whether there's any correlation between different versions of Windows, etc. Updates #4811 Change-Id: I003041d0d7e61d2482acd8155c1a4ed413a2c5c4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f4ff26f577	types/pad32: delete package Use Go 1.19's new 64-bit alignment ~hidden feature instead. Fixes #5356 Change-Id: Ifcbcb115875a7da01df3bc29e9e7feadce5bc956 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Anton Tolchanov	e25ab75795	net/dns: getting base DNS config is not supported on macOS Instead of returning a custom error, use ErrGetBaseConfigNotSupported that seems to be intended for this use case. This fixes DNS resolution on macOS clients compiled from source. Signed-off-by: Anton Tolchanov <anton@tailscale.com>	3 years ago
Joe Tsai	c21a3c4733	types/netlogtype: new package for network logging types (#6092 ) The netlog.Message type is useful to depend on from other packages, but doing so would transitively cause gvisor and other large packages to be linked in. Avoid this problem by moving all network logging types to a single package. We also update staticcheck to take in: `003d277bcf` Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Andrew Dunham	95f3dd1346	net/interfaces: don't dereference null pointer if no destination/netmask Fixes #6065 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I7159b8cbb8d5f47c0668cf83e59167f182f1defd	3 years ago
Andrew Dunham	ba459aeef5	net/interfaces: don't call GetList in List.ForeachInterface It looks like this was left by mistake in `4a3e2842`. Change-Id: Ie4e3d5842548cd2e8533b3552298fb1ce9ba761a Signed-off-by: Andrew Dunham <andrew@tailscale.com>	3 years ago
Peter Cai	4597ec1037	net/dnscache: Handle 4-in-6 addresses in DNS responses On Android, the system resolver can return IPv4 addresses as IPv6-mapped addresses (i.e. `::ffff:a.b.c.d`). After the switch to `net/netip` (`19008a3`), this case is no longer handled and a response like this will be seen as failure to resolve any IPv4 addresses. Handle this case by simply calling `Unmap()` on the returned IPs. Fixes #5698. Signed-off-by: Peter Cai <peter@typeblog.net>	3 years ago
Andrew Dunham	74693793be	net/netcheck, tailcfg: track whether OS supports IPv6 We had previously added this to the netcheck report in #5087 but never copied it into the NetInfo struct. Additionally, add it to log lines so it's visible to support. Change-Id: Ib6266f7c6aeb2eb2a28922aeafd950fe1bf5627e Signed-off-by: Andrew Dunham <andrew@tailscale.com>	3 years ago
Andrew Dunham	e966f024b0	net/dns: print systemd-resolved ResolvConfMode The ResolvConfMode property is documented to return how systemd-resolved is currently managing /etc/resolv.conf. Include that information in the debug line, when available, to assist in debugging DNS issues. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I1ae3a257df1d318d0193a8c7f135c458ec45093e	3 years ago
Andrew Dunham	223126fe5b	cmd/derper, net/netcheck: add challenge/response to generate_204 endpoint The Lufthansa in-flight wifi generates a synthetic 204 response to the DERP server's /generate_204 endpoint. This PR adds a basic challenge/response to the endpoint; something sufficiently complicated that it's unlikely to be implemented by a captive portal. We can then check for the expected response to verify whether we're being MITM'd. Follow-up to #5601 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I94a68c9a16a7be7290200eea6a549b64f02ff48f	3 years ago
Anton Tolchanov	d499afac78	net/interfaces: improve default route detection Instead of treating any interface with a non-ifscope route as a potential default gateway, now verify that a given route is actually a default route (0.0.0.0/0 or ::/0). Fixes #5879 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	3 years ago
Anton Tolchanov	9c2ad7086c	net/interfaces: deduplicate route table parsing on Darwin and FreeBSD Signed-off-by: Anton Tolchanov <anton@tailscale.com>	3 years ago
Mihai Parparita	9d04ffc782	net/wsconn: add back custom wrapper for turning a websocket.Conn into a net.Conn We removed it in #4806 in favor of the built-in functionality from the nhooyr.io/websocket package. However, it has an issue with deadlines that has not been fixed yet (see nhooyr/websocket#350). Temporarily go back to using a custom wrapper (using the fix from our fork) so that derpers will stop closing connections too aggressively. Updates #5921 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Maisem Ali	3555a49518	net/dns: always attempt to read the OS config on macOS/iOS Also reconfigure DNS on iOS/macOS on link changes. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	9a264dac01	net/netcheck: fix crash in checkCaptivePortal If netcheck happens before there's a derpmap. This seems to only affect Headscale because it doesn't send a derpmap as early? Change-Id: I51e0dfca8e40623e04702bc9cc471770ca20d2c2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Joe Tsai	1b4e4cc1e8	wgengine/netlog: new package for traffic flow logging (#5864 ) The Logger type managers a logtail.Logger for extracting statistics from a tstun.Wrapper. So long as Shutdown is called, it ensures that logtail and statistic gathering resources are properly cleared up. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Maisem Ali	ecf6cdd830	ssh/tailssh: add TestSSHAuthFlow Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Joe Tsai	84e8f25c21	net/tstun: rename statististics method (#5852 ) Rename StatisticsEnable as SetStatisticsEnabled to be consistent with other similarly named methods. Rename StatisticsExtract as ExtractStatistics to follow the convention where methods start with a verb. It was originally named with Statistics as a prefix so that statistics related methods would sort well in godoc, but that property no longer holds. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Joe Tsai	dd045a3767	net/flowtrack: add json tags to Tuple (#5849 ) By convention, JSON serialization uses camelCase. Specify such names on the Tuple type. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Joe Tsai	a73c423c8a	net/tunstats: add Counts.Add (#5848 ) The Counts.Add method merges two Counts together. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Joe Tsai	24ebf161e8	net/tstun: instrument Wrapper with statistics gathering (#5847 ) If Wrapper.StatisticsEnable is enabled, then per-connection counters are maintained. If enabled, Wrapper.StatisticsExtract must be periodically called otherwise there is unbounded memory growth. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Joe Tsai	2934c5114c	net/tunstats: new package to track per-connection counters (#5818 ) High-level API: type Statistics struct { ... } type Counts struct { TxPackets, TxBytes, RxPackets, RxBytes uint64 } func (Statistics) UpdateTx([]byte) func (Statistics) UpdateRx([]byte) func (*Statistics) Extract() map[flowtrack.Tuple]Counts The API accepts a []byte instead of a packet.Parsed so that a future implementation can directly hash the address and port bytes, which are contiguous in most IP packets. This will be useful for a custom concurrent-safe hashmap implementation. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Mihai Parparita	8343b243e7	all: consistently initialize Logf when creating tsdial.Dialers Most visible when using tsnet.Server, but could have resulted in dropped messages in a few other places too. Fixes #5743 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	3 years ago
Brad Fitzpatrick	bb7be74756	net/dns/publicdns: permit more NextDNS profile bits in its IPv6 suffix I brain-o'ed the math earlier. The NextDNS prefix is /32 (actually /33, but will guarantee last bit is 0), so we have 128-32 = 96 bits (12 bytes) of config/profile ID that we can extract. NextDNS doesn't currently use all those, but might. Updates #2452 Change-Id: I249bd28500c781e45425fd00fd3f46893ae226a2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Andrew Dunham	a5fab23e8f	net/dns: format OSConfig correctly with no pointers (#5766 ) Fixes tailscale/tailscale#5669 Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	3 years ago
Emmanuel T Odeke	f981b1d9da	all: fix resource leaks with missing .Close() calls Fixes #5706 Signed-off-by: Emmanuel T Odeke <emmanuel@orijtech.com>	3 years ago
Andrew Dunham	b1867457a6	doctor: add package for running in-depth healthchecks; use in bugreport (#5413 ) Change-Id: Iaa4e5b021a545447f319cfe8b3da2bd3e5e5782b Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	3 years ago
James Tucker	f7cb535693	net/speedtest: retune to meet iperf on localhost in a VM - removed some in-flow time calls - increase buffer size to 2MB to overcome syscall cost - move relative time computation from record to report time Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	146f51ce76	net/packet: fix filtering of short IPv4 fragments The fragment offset is an 8 byte offset rather than a byte offset, so the short packet limit is now in fragment block size in order to compare with the offset value. The packet flags are in the first 3 bits of the flags/frags byte, and so after conversion to a uint16 little endian value they are at the start, not the end of the value - the mask for extracting "more fragments" is adjusted to match this byte. Extremely short fragments less than 80 bytes are dropped, but fragments over 80 bytes are now accepted. Fixes #5727 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Andrew Dunham	c6162c2a94	net/netcheck: add check for captive portal (#5593 ) This doesn't change any behaviour for now, other than maybe running a full netcheck more often. The intent is to start gathering data on captive portals, and additionally, seeing this in the 'tailscale netcheck' command should provide a bit of additional information to users. Updates #1634 Change-Id: I6ba08f9c584dc0200619fa97f9fde1a319f25c76 Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	3 years ago
Denton Gentry	42f1d92ae0	net/netns: implement UseSocketMark for Android. Build fails on Android: `../../../../go/pkg/mod/tailscale.com@v1.1.1-0.20220916223019-65c24b6334e9/wgengine/magicsock/magicsock_linux.go:133:12: undefined: netns.UseSocketMark` Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Eng Zer Jun	f0347e841f	refactor: move from io/ioutil to io and os packages The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit replaces the existing io/ioutil functions with their new definitions in io and os packages. Reference: https://golang.org/doc/go1.16#ioutil Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>	3 years ago
Brad Fitzpatrick	74674b110d	envknob: support changing envknobs post-init Updates #5114 Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Andrew Dunham	cf61070e26	net/dnscache: add better logging to bootstrap DNS path (#5640 ) Change-Id: I4cde3a72e06dac18df856a0cfeac10ab7e3a9108 Signed-off-by: Andrew Dunham <andrew@tailscale.com>	3 years ago
Mihai Parparita	82e82d9b7a	net/dns/resolver: remove unused responseTimeout constant Timeout is now enforced elsewhere, see discussion in https://github.com/tailscale/tailscale/pull/4408#discussion_r970092333. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
nyghtowl	0f16640546	net/dns: fix fmt error on Revert print Fixes #5619 Signed-off-by: nyghtowl <warrick@tailscale.com>	3 years ago
David Anderson	7c49db02a2	wgengine/magicsock: don't use BPF receive when SO_MARK doesn't work. Fixes #5607 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	024257ef5a	net/stun: unmap IPv4 addresses in 16 byte STUN replies Updates #5602 Change-Id: I2276ad2bfb415b9ff52f37444f2a1d74b38543b1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	708b7bff3d	net/dns/publicdns: also support NextDNS DoH query parameters The plan has changed. Doing query parameters rather than path + heades. NextDNS added support for query parameters. Updates #2452 Change-Id: I4783c0a06d6af90756d9c80a7512644ba702388c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	81bc4992f2	net/netns: add TS_FORCE_LINUX_BIND_TO_DEVICE for Linux For debugging a macOS-specific magicsock issue. macOS runs in bind-to-interface mode always. This lets me force Linux into the same mode as macOS, even if the Linux kernel supports SO_MARK, as it usually does. Updates #2331 etc Change-Id: Iac9e4a7429c1781337e716ffc914443b7aa2869d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e7376aca25	net/dns/resolver: set DNS-over-HTTPS Accept and User-Agent header on requests Change-Id: I14b821771681e70405a507f43229c694159265ff Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c14361e70e	net/dns/publicdns: support NextDNS DoH URLs with path parameters Updates #2452 Change-Id: I0f1c34cc1672e87e7efd0adfe4088724dd0de3ed Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	2aade349fc	net/dns, types/dnstypes: update some comments, tests for DoH Clarify & verify that some DoH URLs can be sent over tailcfg in some limited cases. Updates #2452 Change-Id: Ibb25db77788629c315dc26285a1059a763989e24 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	58abae1f83	net/dns/{publicdns,resolver}: add NextDNS DoH support NextDNS is unique in that users create accounts and then get user-specific DNS IPs & DoH URLs. For DoH, the customer ID is in the URL path. For IPv6, the IP address includes the customer ID in the lower bits. For IPv4, there's a fragile "IP linking" mechanism to associate your public IPv4 with an assigned NextDNS IPv4 and that tuple maps to your customer ID. We don't use the IP linking mechanism. Instead, NextDNS is DoH-only. Which means using NextDNS necessarily shunts all DNS traffic through 100.100.100.100 (programming the OS to use 100.100.100.100 as the global resolver) because operating systems can't usually do DoH themselves. Once it's in Tailscale's DoH client, we then connect out to the known NextDNS IPv4/IPv6 anycast addresses. If the control plane sends the client a NextDNS IPv6 address, we then map it to the corresponding NextDNS DoH with the same client ID, and we dial that DoH server using the combination of v4/v6 anycast IPs. Updates #2452 Change-Id: I3439d798d21d5fc9df5a2701839910f5bef85463 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Andrew Dunham	f52a659076	net/dnsfallback: allow setting log function (#5550 ) This broke a test in corp that enforces we don't use the log package. Signed-off-by: Andrew Dunham <andrew@tailscale.com>	3 years ago
Andrew Dunham	b8596f2a2f	net/dnsfallback: cache most recent DERP map on disk (#5545 ) This is especially helpful as we launch newer DERPs over time, and older clients have progressively out-of-date static DERP maps baked in. After this, as long as the client has successfully connected once, it'll cache the most recent DERP map it knows about. Resolves an in-code comment from @bradfitz Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	3 years ago
Kris Brandow	19008a3023	net/dnscache: use net/netip Removes usage of net.IP and net.IPAddr where possible from net/dnscache. Fixes #5282 Signed-off-by: Kris Brandow <kris.brandow@gmail.com>	3 years ago
Brad Fitzpatrick	9bd9f37d29	go.mod: bump wireguard/windows, which moves to using net/netip Updates #5162 Change-Id: If99a3f0000bce0c01bdf44da1d513f236fd7cdf8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	9f6c8517e0	net/dns: set OS DNS to 100.100.100.100 for route-less ExtraRecords [cap 41] If ExtraRecords (Hosts) are specified without a corresponding split DNS route and global DNS is specified, then program the host OS DNS to use 100.100.100.100 so it can blend in those ExtraRecords. Updates #1543 Change-Id: If49014a5ecc8e38978ff26e54d1f74fe8dbbb9bc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	68d9d161f4	net/dns: [win] fix regression in disableDynamicUpdate Somehow I accidentally set the wrong registry value here. It should be DisableDynamicUpdate=1 and not EnableDNSUpdate=0. This is a regression from `545639e`. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Nahum Shalman	214242ff62	net/dns/publicdns: Add Mullvad DoH See https://mullvad.net/en/help/dns-over-https-and-dns-over-tls/ The Mullvad DoH servers appear to only speak HTTP/2 and the use of a non-nil DialContext in the http.Transport means that ForceAttemptHTTP2 must be set to true to be able to use them. Signed-off-by: Nahum Shalman <nahamu@gmail.com>	3 years ago
Maisem Ali	9197dd14cc	net/dns: [win] add MagicDNS entries to etc/hosts This works around the 2.3s delay in short name lookups when SNR is enabled. C:\Windows\System32\drivers\etc\hosts file. We only add known hosts that match the search domains, and we populate the list in order of Search Domains so that our matching algorithm mimics what Windows would otherwise do itself if SNR was off. Updates #1659 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Kris Brandow	9ae1161e85	net/dnscache: fix v4addrs to return only v4 addrs Update the v4addrs function to filter out IPv6 addresses. Fixes regression from `8725b14056`. Signed-off-by: Kris Brandow <kris.brandow@gmail.com>	3 years ago
Kris Brandow	8f38afbf8e	net/stun: convert to use net/netip.AddrPort Convert ParseResponse and Response to use netip.AddrPort instead of net.IP and separate port. Fixes #5281 Signed-off-by: Kris Brandow <kris.brandow@gmail.com>	3 years ago
Maisem Ali	25865f81ee	net/dns: disable NetBIOS on Tailscale interfaces Like LLMNR, NetBIOS also adds resolution delays and we don't support it anyway so just disable it on the interface. Updates #1659 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	545639ee44	util/winutil: consolidate interface specific registry keys Code movement to allow reuse in a follow up PR. Updates #1659 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	1cff719015	net/dns: [win] respond with SERVFAIL queries when no resolvers Currently we forward unmatched queries to the default resolver on Windows. This results in duplicate queries being issued to the same resolver which is just wasted. Updates #1659 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Andrew Dunham	d942a2ff56	net/dnscache: try IPv6 addresses first (#5349 ) Signed-off-by: Andrew Dunham <andrew@tailscale.com> Signed-off-by: Andrew Dunham <andrew@tailscale.com>	3 years ago
Maisem Ali	3bb57504af	net/dns/resolver: add comments clarifying nil error returns Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	4497bb0b81	net/dns/resolver: return SERVFAIL when no upstream resolvers set Otherwise we just keep looping over the same thing again and again. ``` dns udp query: upstream nameservers not set dns udp query: upstream nameservers not set dns udp query: upstream nameservers not set ``` Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	ec9d13bce5	hostinfo, net/netcheck: use CutPrefix Updates #5309 Change-Id: I37e594cfd245784bf810c493de68a66d3ff20677 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	18109c63b0	net/socks5: use new Go 1.19 binary.AppendByteOrder.AppendUintX Updates #4872 Change-Id: I43db63d2ba237324bc1cd87d4261197f14cb1088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Andrew Dunham	f0d6f173c9	net/netcheck: try ICMP if UDP is blocked (#5056 ) Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	3 years ago
Maisem Ali	a9f6cd41fd	all: use syncs.AtomicValue Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	4950fe60bd	syncs, all: move to using Go's new atomic types instead of ours Fixes #5185 Change-Id: I850dd532559af78c3895e2924f8237ccc328449d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	9bb5a038e5	all: use atomic.Pointer Also add some missing docs. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	5381437664	logtail, net/portmapper, wgengine/magicsock: use fmt.Appendf Fixes #5206 Change-Id: I490bb92e774ce7c044040537e2cd864fcf1dbe5a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	5f6abcfa6f	all: migrate code from netaddr.FromStdAddr to Go 1.18 With caveat https://github.com/golang/go/issues/53607#issuecomment-1203466984 that then requires a new wrapper. But a simpler one at least. Updates #5162 Change-Id: I0a5265065bfcd7f21e8dd65b2bd74cae90d76090 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	8725b14056	all: migrate more code code to net/netip directly Instead of going through the tailscale.com/net/netaddr transitional wrappers. Updates #5162 Change-Id: I3dafd1c2effa1a6caa9b7151ecf6edd1a3fda3dd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	116f55ff66	all: gofmt for Go 1.19 Updates #5210 Change-Id: Ib02cd5e43d0a8db60c1f09755a8ac7b140b670be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Aaron Klotz	4dbdb19c26	net/tshttpproxy: fix incorrect type in Windows implementation, switch to mkwinsyscall, fix memory leak The definition of winHTTPProxyInfo was using the wrong type (uint16 vs uint32) for its first field. I fixed that type. Furthermore, any UTF16 strings returned in that structure must be explicitly freed. I added code to do this. Finally, since this is the second time I've seen type safety errors in this code, I switched the native API calls over to use wrappers generated by mkwinsyscall. I know that would not have helped prevent the previous two problems, but every bit helps IMHO. Updates https://github.com/tailscale/tailscale/issues/4811 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
nyghtowl	e6e1976c3a	net/dns: remove systemd-resolved ping Ping only needed to ensure system awak otherwise utilizing resolvConf to set dns mode. Signed-off-by: nyghtowl <warrick@tailscale.com>	3 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Aaron Klotz	1cae618b03	net/dns: add Windows group policy notifications to the NRPT rule manager As discussed in previous PRs, we can register for notifications when group policies are updated and act accordingly. This patch changes nrptRuleDatabase to receive notifications that group policy has changed and automatically move our NRPT rules between the local and group policy subkeys as needed. Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
Melanie Warrick	f17873e0f4	net/dns: handle D-Bus restarts in resolved manager (#5026 ) When dbus restarts it can cause the tailscaled to crash because the nil signal was not handled in resolved.Fixing so the nil signal leads to a connection reset and tailscaled stays connected to systemd when dbus restarted. Fixes #4645 Co-authored-by: James Tucker <james@tailscale.com> Signed-off-by: nyghtowl <warrick@tailscale.com> Co-authored-by: James Tucker <james@tailscale.com>	3 years ago
Maisem Ali	9514ed33d2	go.mod: bump gvisor.dev/gvisor Pick up https://github.com/google/gvisor/pull/7787 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
David Anderson	c1cb3efbba	net/netcheck: test for OS IPv6 support as well as connectivity. This lets us distinguish "no IPv6 because the device's ISP doesn't offer IPv6" from "IPv6 is unavailable/disabled in the OS". Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	0d52674a84	net/tstun: diagnose /dev/net/tun fd leak, give better failure message Updates #5029 Change-Id: Ibee5e0c9076fe764eb5d856d5ef8b09f4d0e2921 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Andrew Dunham	c7993d2b88	net/dns/resolver: add fuzz/unit test for #2533 (#5018 ) Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	3 years ago
Tom DNetto	d6817d0f22	net/dns/resolver: respond with SERVFAIL if all upstreams fail Fixes #4722 Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Mihai Parparita	ec649e707f	ipn/ipnlocal: prefer to use one CGNAT route on the Mac Together with `06aa141632` this minimizes the number of NEPacketTunnelNetworkSettings updates that we have to do, and thus avoids Chrome interrupting outstanding requests due to (perceived) network changes. Updates #3102 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Brad Fitzpatrick	aa37aece9c	ipn/ipnlocal, net/dns, util/cloudenv: add AWS DNS support And remove the GCP special-casing from ipn/ipnlocal; do it only in the forwarder for .internal. Fixes #4980 Fixes #4981 Change-Id: I5c481e96d91f3d51d274a80fbd37c38f16dfa5cb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	88c2afd1e3	ipn/ipnlocal, net/dns, util/cloudenv: specialize DNS config on Google Cloud This does three things: If you're on GCP, it adds a .internal DNS split route to the metadata server, so we never break GCP DNS names. This lets people have some Tailscale nodes on GCP and some not (e.g. laptops at home) without having to add a Tailnet-wide .internal DNS route. If you already have such a route, though, it won't overwrite it. * If the 100.100.100.100 DNS forwarder has nowhere to forward to, it forwards it to the GCP metadata IP, which forwards to 8.8.8.8. This means there are never errNoUpstreams ("upstream nameservers not set") errors on GCP due to e.g. mangled /etc/resolv.conf (GCP default VMs don't have systemd-resolved, so it's likely a DNS supremacy fight) * makes the DNS fallback mechanism use the GCP metadata IP as a fallback before our hosted HTTP-based fallbacks I created a default GCP VM from their web wizard. It has no systemd-resolved. I then made its /etc/resolv.conf be empty and deleted its GCP hostnames in /etc/hosts. I then logged in to a tailnet with no global DNS settings. With this, tailscaled writes /etc/resolv.conf (direct mode, as no systemd-resolved) and sets it to 100.100.100.100, which then has regular DNS via the metadata IP and .internal DNS via the metadata IP as well. If the tailnet configures explicit DNS servers, those are used instead, except for .internal. This also adds a new util/cloudenv package based on version/distro where the cloud type is only detected once. We'll likely expand it in the future for other clouds, doing variants of this change for other popular cloud environments. Fixes #4911 RELNOTES=Google Cloud DNS improvements Change-Id: I19f3c2075983669b2b2c0f29a548da8de373c7cf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	d7f452c0a1	net/portmapper: send discovery packet for IGD specifically. There appear to be devices out there which send only their first descriptor in response to a discovery packet for `ssdp:all`, for example the Sagemcom FAST3890V3 only sends urn:schemas-wifialliance-org:device:WFADevice:1 Send both ssdp:all and a discovery frame for InternetGatewayDevice specifically. Updates https://github.com/tailscale/tailscale/issues/3557 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	09eaba91ad	net/portmap: add a test for Sagemcom FAST3890V3. Updates https://github.com/tailscale/tailscale/issues/3557 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	b5553c6ad2	net/portmap: run go fmt Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	de4c635e54	net/portmapper: make pcpCodeNotAuthorized log more descriptive If PCP is present but disabled, turning it on might help get direct connections. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Aaron Klotz	4baf34cf25	net/dns: set appropriate Windows registry values to prevent it from sending DNS changes concerning our interface to AD domain controllers. We do this unconditionally inside SetDNS such that the values are always set before we make any other changes to DNS configurations. It should not be harmful for the settings to remain even when other DNS settings are cleared out (since they only affect our network interface). See https://docs.microsoft.com/en-us/troubleshoot/windows-server/networking/configure-dns-dynamic-updates-windows-server-2003 for details about the registry value. Fixes https://github.com/tailscale/tailscale/issues/4829 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	4 years ago
Aaron Klotz	8cdfd12977	net/dns: update Windows split DNS settings to work alongside other NRPT entries set by group policy. When there are group policy entries for the NRPT that do not belong to Tailscale, we recognize that we need to add ourselves to group policy and use that registry key instead of the local one. We also refresh the group policy settings as necessary to ensure that our changes take effect immediately. Fixes https://github.com/tailscale/tailscale/issues/4607 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	4 years ago
Brad Fitzpatrick	13d0b8e6a4	control/controlclient, net/dnscache: use typed singleflight fork Change-Id: I12be4c5a91ae3a812fe88d9b2d15526fdbb5a921 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Denton Gentry	1392a93445	socks5: add a simple test Start up a backend service, put a SOCKS5 server in front of it, and verify that we can get data from the backend via SOCKS5. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Denton Gentry	7fffddce8e	net/portmapper: enable for iOS In the 1.27 unstable releases we set the min-version to iOS15, which means we have 50 MBytes of RAM in the Network Extension. https://tailscale.com/blog/go-linker/ Include the UPnP/NAT-PMP/PCP portmapper support now that there is memory for it. Fixes https://github.com/tailscale/tailscale/issues/2495 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Mihai Parparita	edc90ebc61	net/wsconn: remove homegrown wrapper for turning a websocket.Conn into a net.Conn The one from the nhooyr/websocket package seems to work equally well. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	4 years ago
Mihai Parparita	27a1ad6a70	wasm: exclude code that's not used on iOS for Wasm too It has similar size constraints. Saves ~1.9MB from the Wasm build. Updates #3157 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	4 years ago
Mihai Parparita	a9f32656f5	control/controlhttp: allow client and server to communicate over WebSockets We can't do Noise-over-HTTP in Wasm/JS (because we don't have bidirectional communication), but we should be able to do it over WebSockets. Reuses derp WebSocket support that allows us to turn a WebSocket connection into a net.Conn. Updates #3157 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	4 years ago
Maisem Ali	80157f3f37	net/dns/resolver: add support for <IPv4>.via-<site-id> Currently we only support "via-<site-id>.<IPv4>", however that does not work with Google Chrome which parses `http://via-1.10.0.0.1` as a search string and not as a URL. This commit introduces "<IPv4>.via-<site-id>" (`http://10.0.0.1.via-1`) which is parsed correctly by Chrome. Updates #3616 Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Brad Fitzpatrick	1336fb740b	wgengine/netstack: make netstack MTU be 1280 also Updates #3878 Change-Id: I1850085b32c8a40d85607b4ad433622c97d96a8d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Aaron Klotz	b005b79236	net/dns, paths, util/winutil: change net/dns/windowsManager NRPT management to support more than 50 domains. AFAICT this isn't documented on MSDN, but based on the issue referenced below, NRPT rules are not working when a rule specifies > 50 domains. This patch modifies our NRPT rule generator to split the list of domains into chunks as necessary, and write a separate rule for each chunk. For compatibility reasons, we continue to use the hard-coded rule ID, but as additional rules are required, we generate new GUIDs. Those GUIDs are stored under the Tailscale registry path so that we know which rules are ours. I made some changes to winutils to add additional helper functions in support of both the code and its test: I added additional registry accessors, and also moved some token accessors from paths to util/winutil. Fixes https://github.com/tailscale/coral/issues/63 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	4 years ago
Tom	acfe5bd33b	net/dns{., resolver}: time out DNS queries after 10 seconds (#4690 ) Fixes https://github.com/tailscale/corp/issues/5198 The upstream forwarder will block indefinitely on `udpconn.ReadFrom` if no reply is recieved, due to the lack of deadline on the connection object. There still isn't a deadline on the connection object, but the automatic closing of the context on deadline expiry will close the connection via `closeOnCtxDone`, unblocking the read and resulting in a normal teardown. Signed-off-by: Tom DNetto <tom@tailscale.com>	4 years ago
Mihai Parparita	86069874c9	net/tstun, wgengine: use correct type for counter metrics We were marking them as gauges, but they are only ever incremented, thus counter is more appropriate. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	4 years ago
Maisem Ali	fd99c54e10	tailcfg,all: change structs to []*dnstype.Resolver Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Tom	d1d6ab068e	net/dns, wgengine: implement DNS over TCP (#4598 ) * net/dns, wgengine: implement DNS over TCP Signed-off-by: Tom DNetto <tom@tailscale.com> * wgengine/netstack: intercept only relevant port/protocols to quad-100 Signed-off-by: Tom DNetto <tom@tailscale.com>	4 years ago
James Tucker	f9e86e64b7	*: use WireGuard where logged, printed or named Signed-off-by: James Tucker <james@tailscale.com>	4 years ago
James Tucker	ae483d3446	wgengine, net/packet, cmd/tailscale: add ICMP echo Updates tailscale/corp#754 Signed-off-by: James Tucker <james@tailscale.com>	4 years ago
Tom DNetto	2a0b5c21d2	net/dns/{., resolver}, wgengine: fix goroutine leak on shutdown Signed-off-by: Tom DNetto <tom@tailscale.com>	4 years ago
Tom DNetto	7f45734663	assorted: documentation and readability fixes This were intended to be pushed to #4408, but in my excitement I forgot to git push :/ better late than never. Signed-off-by: Tom DNetto <tom@tailscale.com>	4 years ago
Tom DNetto	9e77660931	net/tstun,wgengine/{.,netstack}: handle UDP magicDNS traffic in netstack This change wires netstack with a hook for traffic coming from the host into the tun, allowing interception and handling of traffic to quad-100. With this hook wired, magicDNS queries over UDP are now handled within netstack. The existing logic in wgengine to handle magicDNS remains for now, but its hook operates after the netstack hook so the netstack implementation takes precedence. This is done in case we need to support platforms with netstack longer than expected. Signed-off-by: Tom DNetto <tom@tailscale.com>	4 years ago
Tom DNetto	dc71d3559f	net/tstun,wgengine: split PreFilterOut into multiple hooks A subsequent commit implements handling of magicDNS traffic via netstack. Implementing this requires a hook for traffic originating from the host and hitting the tun, so we make another hook to support this. Signed-off-by: Tom DNetto <tom@tailscale.com>	4 years ago
Tom DNetto	5b85f848dd	net/dns,net/dns/resolver: refactor channels/magicDNS out of Resolver Moves magicDNS-specific handling out of Resolver & into dns.Manager. This greatly simplifies the Resolver to solely issuing queries and returning responses, without channels. Enforcement of max number of in-flight magicDNS queries, assembly of synthetic UDP datagrams, and integration with wgengine for recieving/responding to magicDNS traffic is now entirely in Manager. This path is being kept around, but ultimately aims to be deleted and replaced with a netstack-based path. This commit is part of a series to implement magicDNS using netstack. Signed-off-by: Tom DNetto <tom@tailscale.com>	4 years ago
Brad Fitzpatrick	6bed781259	all: gofmt all Well, goimports actually (which adds the normal import grouping order we do) Change-Id: I0ce1b1c03185f3741aad67c14a7ec91a838de389 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
James Tucker	96fec4b969	net/tshttpproxy: synology: pick proxy by scheme This updates the fix from #4562 to pick the proxy based on the request scheme. Updates #4395, #2605, #4562 Signed-off-by: James Tucker <james@tailscale.com>	4 years ago
Maisem Ali	eff6a404a6	net/tshttpproxy: use http as the scheme for proxies Currently we try to use `https://` when we see `https_host`, however that doesn't work and results in errors like `Received error: fetch control key: Get "https://controlplane.tailscale.com/key?v=32": proxyconnect tcp: tls: first record does not look like a TLS handshake` This indiciates that we are trying to do a HTTPS request to a HTTP server. Googling suggests that the standard is to use `http` regardless of `https` or `http` proxy Updates #4395, #2605 Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Maisem Ali	5a1ef1bbb9	net/tsdial: add SystemDial as a wrapper on netns.Dial The connections returned from SystemDial are automatically closed when there is a major link change. Also plumb through the dialer to the noise client so that connections are auto-reset when moving from cellular to WiFi etc. Updates #3363 Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Brad Fitzpatrick	c6c752cf64	net/tshttpproxy: fix typo Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Tom DNetto	5fb8e01a8b	net/dns/resolver: add metric for number of truncated dns packets Updates #2067 This should help us determine if more robust control of edns parameters + implementing answer truncation is warranted, given its likely complexity. Signed-off-by: Tom DNetto <tom@tailscale.com>	4 years ago
Brad Fitzpatrick	e97209c6bf	net/dns: add tailscaled-on-macOS DNS OSConfigurator This populates DNS suffixes ("ts.net", etc) in /etc/resolver/* files to point to 100.100.100.100 so MagicDNS works. It also sets search domains. Updates #4276 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Tom DNetto	78fededaa5	net/dns/resolver: support magic resolution of via-<siteid>.<ip4> domains Updates #3616 Signed-off-by: Tom DNetto <tom@tailscale.com>	4 years ago
James Tucker	700bd37730	tshttpproxy: support synology proxy configuration Fixes #4395 Fixes #2605 Signed-off-by: James Tucker <james@tailscale.com>	4 years ago
Tom DNetto	df26c63793	net/dns/resolver, net/tsaddr: fix reverse lookups in 4to6 IP range Fixes #4439 Signed-off-by: Tom DNetto <tom@tailscale.com>	4 years ago
Brad Fitzpatrick	d413850bd7	cmd/tailscale: add "debug via" subcommand to do CIDR math for via ranges $ tailscale debug via 0xb 10.2.0.0/16 fd7a:115c:a1e0:b1a:0🅱️a02:0/112 $ tailscale debug via fd7a:115c:a1e0:b1a:0🅱️a02:0/112 site 11 (0xb), 10.2.0.0/16 Previously: `3ae701f0eb` This adds a little debug tool to do CIDR math to make converting between those ranges easier for now. Updates #3616 Change-Id: I98302e95d17765bfaced3ecbb71cbd43e84bff46 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Tom DNetto	c8f4dfc8c0	derp/derphttp,net/netcheck: improve netcheck behavior under MITM proxies In cases where tailscale is operating behind a MITM proxy, we need to consider that a lot more of the internals of our HTTP requests are visible and may be used as part of authorization checks. As such, we need to 'behave' as closely as possible to ideal. - Some proxies do authorization or consistency checks based the on Host header or HTTP URI, instead of just the IP/hostname/SNI. As such, we need to construct a `*http.Request` with a valid URI everytime HTTP is going to be used on the wire, even if its over TLS. Aside from the singular instance in net/netcheck, I couldn't find anywhere else a http.Request was constructed incorrectly. - Some proxies may deny requests, typically by returning a 403 status code. We should not consider these requests as a valid latency check, so netcheck semantics have been updated to consider >299 status codes as a failed probe. Signed-off-by: Tom DNetto <tom@tailscale.com>	4 years ago
Brad Fitzpatrick	cc575fe4d6	net/dns: schedule DoH upgrade explicitly, fix Resolver.Addr confusion Two changes in one: * make DoH upgrades an explicitly scheduled send earlier, when we come up with the resolvers-and-delay send plan. Previously we were getting e.g. four Google DNS IPs and then spreading them out in time (for back when we only did UDP) but then later we added DoH upgrading at the UDP packet layer, which resulted in sometimes multiple DoH queries to the same provider running (each doing happy eyeballs dialing to 4x IPs themselves) for each of the 4 source IPs. Instead, take those 4 Google/Cloudflare IPs and schedule 5 things: first the DoH query (which can use all 4 IPs), and then each of the 4 IPs as UDP later. * clean up the dnstype.Resolver.Addr confusion; half the code was using it as an IP string (as documented) as half was using it as an IP:port (from some prior type we used), primarily for tests. Instead, document it was being primarily an IP string but also accepting an IP:port for tests, then add an accessor method on it to get the IPPort and use that consistently everywhere. Change-Id: Ifdd72b9e45433a5b9c029194d50db2b9f9217b53 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	e3a4952527	net/dns/resolver: count errors when racing DNS queries, fail earlier If all N queries failed, we waited until context timeout (in 5 seconds) to return. This makes (*forwarder).forward fail fast when the network's unavailable. Change-Id: Ibbb3efea7ed34acd3f3b29b5fee00ba8c7492569 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	d9efbd97cb	net/dns: remove an unused function Change-Id: I7c920c76223ffac37954ef2a18754afc52177598 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ecea6cb994	net/dns/resolver: make DoH dialer use existing dnscache happy eyeball dialer Simplify the ability to reason about the DoH dialing code by reusing the dnscache's dialer we already have. Also, reduce the scope of the "ip" variable we don't want to close over. This necessarily adds a new field to dnscache.Resolver: SingleHostStaticResult, for when the caller already knows the IPs to be returned. Change-Id: I9f2aef7926f649137a5a3e63eebad6a3fffa48c0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	f4f76eb275	net/dnsfallback: update from 'go generate' Change-Id: I93e0e6d9a4a471953c1ffef07f32605c5724aed8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
phirework	52d32c94d8	net/dns/publicdns: add missing call to sync.Once.Do (#4410 ) Signed-off-by: Jenny Zhang <jz@tailscale.com>	4 years ago
phirework	83c734a6e0	net/dns, util/publicdns: extract public DNS mapping into own package (#4405 ) This extracts DOH mapping of known public DNS providers in forwarder.go into its own package, to be consumed by other repos Signed-off-by: Jenny Zhang <jz@tailscale.com>	4 years ago
Brad Fitzpatrick	a49d8d5200	Revert ".github/workflows: work around golang/go#51629" This reverts commit `2a412ac9ee`. Updates #4194 Change-Id: I0098b66b71d20bea301ca79058c1cdd201237dd0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	3ae701f0eb	net/tsaddr, wgengine/netstack: add IPv6 range that forwards to site-relative IPv4 This defines a new magic IPv6 prefix, fd7a:115c:a1e0:b1a::/64, a subset of our existing /48, where the final 32 bits are an IPv4 address, and the middle 32 bits are a user-chosen "site ID". (which must currently be 0000:00xx; the top 3 bytes must be zero for now) e.g., I can say my home LAN's "site ID" is "0000:00bb" and then advertise its 10.2.0.0/16 IPv4 range via IPv6, like: tailscale up --advertise-routes=fd7a:115c:a1e0:b1a::bb:10.2.0.0/112 (112 being /128 minuse the /96 v6 prefix length) Then people in my tailnet can: $ curl '[fd7a:115c:a1e0:b1a::bb:10.2.0.230]' <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" .... Updates #3616, etc RELNOTE=initial support for TS IPv6 addresses to route v4 "via" specific nodes Change-Id: I9b49b6ad10410a24b5866b9fbc69d3cae1f600ef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Tom	24bdcbe5c7	net/dns, net/dns/resolver, wgengine: refactor DNS request path (#4364 ) * net/dns, net/dns/resolver, wgengine: refactor DNS request path Previously, method calls into the DNS manager/resolver types handled DNS requests rather than DNS packets. This is fine for UDP as one packet corresponds to one request or response, however will not suit an implementation that supports DNS over TCP. To support PRs implementing this in the future, wgengine delegates all handling/construction of packets to the magic DNS endpoint, to the DNS types themselves. Handling IP packets at this level enables future support for both UDP and TCP. Signed-off-by: Tom DNetto <tom@tailscale.com>	4 years ago
Tom	6be7931eb4	net/dns/resolver: return symbolic PTR records for TS service IPs (#4361 ) Fixes #1233 Signed-off-by: Tom DNetto <tom@tailscale.com> Co-authored-by: Tom DNetto <tom@tailscale.com>	4 years ago
Maisem Ali	309ddef852	net/netutil: add CheckIPForwardingLinux (#4301 ) Combine the code between `LocalBackend.CheckIPForwarding` and `controlclient.ipForwardingBroken`. Fixes #4300 Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Brad Fitzpatrick	e4d8d5e78b	net/packet, wgengine/netstack: remove workaround for old gvisor ECN bug Fixes #2642 Change-Id: Ic02251d24a4109679645d1c8336e0f961d0cce13 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	753f1bfad4	cmd/tailscale: write fewer known_hosts, resolve ssh host to FQDN early Updates #3802 Change-Id: Ic44fa2e6661a9c046e725c04fa6b8213d3d4d2b2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Maisem Ali	b2f269d5b7	net/dnsfallback: do not attempt lookups of IPs. Currently if the passed in host is an IP, Lookup still attempts to resolve it with a dns server. This makes it just return the IP directly. Updates tailscale/corp#4475 Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Maisem Ali	b45bb577a0	net/dnscache: do not call LookupIPFallback if the context was canceled. When the context is canceled, dc.dialOne returns an error from line 345. This causes the defer on line 312 to try to resolve the host again, which triggers a dns lookup of "127.0.0.1" from derp. Updates tailscale/corp#4475 Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Brad Fitzpatrick	b647977b33	net/netutil: move some net utils from control/controlhttp to netutil In prep for reuse elsewhere. Change-Id: I1b804edf76ac66b9108e6f434e77eab7a7472d69 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
James Tucker	445c04c938	wgengine: inject packetbuffers rather than bytes (#4220 ) Plumb the outbound injection path to allow passing netstack PacketBuffers down to the tun Read, where they are decref'd to enable buffer re-use. This removes one packet alloc & copy, and reduces GC pressure by pooling outbound injected packets. Fixes #2741 Signed-off-by: James Tucker <james@tailscale.com>	4 years ago
Brad Fitzpatrick	f2041c9088	all: use strings.Cut even more Change-Id: I943ce72c6f339589235bddbe10d07799c4e37979 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Aaron Klotz	6e91f872af	net/tshttpproxy: ensure we pass the correct flags to WinHttpOpen on Win7 and Win8.0 The best flag to use on Win7 and Win8.0 is deprecated in Win8.1, so we resolve the flag depending on OS version info. Fixes https://github.com/tailscale/tailscale/issues/4201 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	4 years ago
David Anderson	2a412ac9ee	.github/workflows: work around golang/go#51629 Incidentally, simplify the go generate CI workflow, by marking the dnsfallback update non-hermetic (so CI will skip it) rather than manually filter it out of `go list`. Updates #4194 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	61ee72940c	all: use Go 1.18's strings.Cut More remain. Change-Id: I6ec562cc1f687600758deae1c9d7dbd0d04004cb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	0ef74f37a5	net/dns/resolver: remove closure allocation explanation As of Go 1.18, the register ABI list includes arm64, amd64, ppc64, and ppc64le. This is a large enough percentage of the architectures that it's not worth explaining. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	61cdcf4082	net/interfaces: add FreeBSD default route lookup (portmapping, etc) Updates #4101 (probably fixes) Change-Id: I2b75ee3ced276fb7b211f17c382621cf1ef882fa Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Maisem Ali	2fb087891b	net/socks5: always close client connections after serving Customer reported an issue where the connections were not closing, and would instead just stay open. This commit makes it so that we close out the connection regardless of what error we see. I've verified locally that it fixes the issue, we should add a test for this. Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Brad Fitzpatrick	b493ef5b71	net/tsaddr: add func ContainsExitRoutes Change-Id: I772441a406083e2fe0f9374b2b23d89aac18928f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	55095df644	net/interfaces: get Linux default route from netlink as fallback If it's in a non-standard table, as it is on Unifi UDM Pro, apparently. Updates #4038 (probably fixes, but don't have hardware to verify) Change-Id: I2cb9a098d8bb07d1a97a6045b686aca31763a937 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Dmytro Shynkevych	d9a7205be5	net/tstun: set link speed to SPEED_UNKNOWN Fixes #3933. Signed-off-by: Dmytro Shynkevych <dm.shynk@gmail.com>	4 years ago
Brad Fitzpatrick	7d897229d9	net/dns: ignore permission errors on Synology DSM7 for now Updates #4017 Change-Id: Ia7fd4df47588c010dea8e63d88f397cc8eb748e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	bb94561c96	net/netutil: fix regression where peerapi would get closed after 1st req I introduced a bug in `8fe503057d` when unifying oneConnListener implementations. The NewOneConnListenerFrom API was easy to misuse (its Close method closes the underlying Listener), and we did (via http.Serve, which closes the listener after use, which meant we were close the peerapi's listener, even though we only wanted its Addr) Instead, combine those two constructors into one and pass in the Addr explicitly, without delegating through to any Listener. Change-Id: I061d7e5f842e0cada416e7b2dd62100d4f987125 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	2ff481ff10	net/dns: add health check for particular broken-ish Linux DNS config Updates #3937 (need to write docs before closing) Change-Id: I1df7244cfbb0303481e2621ee750d21358bd67c6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c988bd6ed1	net/dns/resolvconffile: unify three /etc/resolv.conf parsers into new package Change-Id: I2120893ca802d12f1bd0407d49077d3672627d33 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	8d6cf14456	net/dnscache: don't do bootstrap DNS lookup after most failed dials If we've already connected to a certain name's IP in the past, don't assume the problem was DNS related. That just puts unnecessarily load on our bootstrap DNS servers during regular restarts of Tailscale infrastructure components. Also, if we do do a bootstrap DNS lookup and it gives the same IP(s) that we already tried, don't try them again. Change-Id: I743e8991a7f957381b8e4c1508b8e9d0df1782fe Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	903988b392	net/dnscache: refactor from func-y closure-y state to types & methods No behavior changes (intended, at least). This is in prep for future changes to this package, which would get too complicated in the current style. Change-Id: Ic260f8e34ae2f64f34819d4a56e38bee8d8ac5ce Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	8267ea0f80	net/tstun: remove TODO that's done This TODO was both added and fixed in `506c727e3`. As I recall, I wasn't originally going to do it because it seemed annoying, so I wrote the TODO, but then I felt bad about it and just did it, but forgot to remove the TODO. Change-Id: I8f3514809ad69b447c62bfeb0a703678c1aec9a3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	8fe503057d	net/netutil: unify two oneConnListeners into a new package I was about to add a third copy, so unify them now instead. Change-Id: I3b93896aa1249b1250a6b1df4829d57717f2311a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	21358cf2f5	net/dns: slightly optimize dbusPing for non-dbus case [Linux] Avoid some work when D-Bus isn't running. Change-Id: I6f89bb75fdb24c13f61be9b400610772756db1ef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	37e7a387ff	net/dns: remove some unused code for detecting systemd-resolved [Linux] Change-Id: I19c5fd2cdacfb9e5b688ccd9b4336ae4edffc445 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	15599323a1	net/dns: fix systemd-resolved detection race at boot If systemd-resolved is enabled but not running (or not yet running, such as early boot) and resolv.conf is old/dangling, we weren't detecting systemd-resolved. This moves its ping earlier, which will trigger it to start up and write its file. Updates #3362 (likely fixes) Updates #3531 (likely fixes) Change-Id: I6392944ac59f600571c43b8f7a677df224f2beed Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Denton Gentry	dbea8217ac	net/dns: add NetworkManager regression test Use the exact /etc/resolv.conf file from a user report. Updates https://github.com/tailscale/tailscale/issues/3531 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Brad Fitzpatrick	2a67beaacf	net/interfaces: bound Linux /proc/net/route parsing tailscaled was using 100% CPU on a machine with ~1M lines, 100MB+ of /proc/net/route data. Two problems: in likelyHomeRouterIPLinux, we didn't stop reading the file once we found the default route (which is on the first non-header line when present). Which meant it was finding the answer and then parsing 100MB over 1M lines unnecessarily. Second was that if the default route isn't present, it'd read to the end of the file looking for it. If it's not in the first 1,000 lines, it ain't coming, or at least isn't worth having. (it's only used for discovering a potential UPnP/PMP/PCP server, which is very unlikely to be present in the environment of a machine with a ton of routes) Change-Id: I2c4a291ab7f26aedc13885d79237b8f05c2fd8e4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Aaron Bieber	e5cd765e00	net/dns/resolvd: properly handle not having "search" entries This prevents adding an empty "search" line when no search domains are set. Signed-off-by: Aaron Bieber <aaron@bolddaemon.com>	4 years ago
Brad Fitzpatrick	1af26222b6	go.mod: bump netstack, switch to upstream netstack Now that Go 1.17 has module graph pruning (https://go.dev/doc/go1.17#go-command), we should be able to use upstream netstack without breaking our private repo's build that then depends on the tailscale.com Go module. This is that experiment. Updates #1518 (the original bug to break out netstack to own module) Updates #2642 (this updates netstack, but doesn't remove workaround) Change-Id: I27a252c74a517053462e5250db09f379de8ac8ff Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	6feb8f4c51	net/dns: log why resolved does not look like it's on use [Linux] Updates #3742 Updates #3531 Change-Id: I9fc7fa0f4bcab1cf8001ba92408c660a5b25f105 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Aaron Bieber	411c6c316c	net/dns/resolvd: store nameservers Currently only search domains are stored. This was an oversight (under?) on my part. As things are now, when MagicDNS is on and "Override local DNS" is off, the dns forwarder has to timeout before names resolve. This introduces a pretty annoying lang that makes everything feel extremely slow. You will also see an error: "upstream nameservers not set". I tested with "Override local DNS" on and off. In both situations things seem to function as expected (and quickly). Signed-off-by: Aaron Bieber <aaron@bolddaemon.com>	4 years ago

... 3 4 5 6 7 ...

965 Commits (205a10b51a5896fdaf74ba88b13db611a145ceb2)