Attempt to fix
Collecting hdrhistogram==0.6.1 (from -r tests/ansible/requirements.txt
(line 2))
Downloading
2422ad2ad90047d3b9f73061e8696f/hdrhistogram-0.6.1.tar.gz
(61kB)
Complete output from command python setup.py egg_info:
Couldn't find index page for 'pbr' (maybe misspelled?)
sources=['src/python-codec.c'])]
File "/usr/lib/python3.5/distutils/core.py", line 108, in setup
_setup_distribution = dist = klass(attrs)
File "/tmp/venv/lib/python3.5/site-packages/setuptools/dist.py",
line 315, in __init__
self.fetch_build_eggs(attrs['setup_requires'])
File "/tmp/venv/lib/python3.5/site-packages/setuptools/dist.py",
line 361, in fetch_build_eggs
replace_conflicting=True,
File
"/tmp/venv/lib/python3.5/site-packages/pkg_resources/__init__.py", line
850, in resolve
dist = best[req.key] = env.best_match(req, ws, installer)
File
"/tmp/venv/lib/python3.5/site-packages/pkg_resources/__init__.py", line
1122, in best_match
return self.obtain(req, installer)
File
"/tmp/venv/lib/python3.5/site-packages/pkg_resources/__init__.py", line
1134, in obtain
return installer(requirement)
File "/tmp/venv/lib/python3.5/site-packages/setuptools/dist.py",
line 429, in fetch_build_egg
return cmd.easy_install(req)
File
"/tmp/venv/lib/python3.5/site-packages/setuptools/command/easy_install.py",
line 659, in easy_install
raise DistutilsError(msg)
distutils.errors.DistutilsError: Could not find suitable
distribution for Requirement.parse('pbr')
From cpuset(7):
> For masks longer than one word, a comma separator is used between
> words. Words are displayed in big-endian order, which has the most
> significant bit first. The hex digits within a word are also in
> big-endian order.
A few changes are bundled in this
- Ansible 2.10.x and Mitogen 0.3.x are used to build nearly all images
(Ansile 2.3.x is retained for CentOS 5, because it uses Python 2.4).
- Tox is used to install/run Ansible, replacing build_docker_images.py
- A static inventory, identifying containers by name rather than ID.
- debian-test image is renamed to debian9-test
- debian9-test image is now based on debian:9
- centos6-test image is now based on moreati/centos6-vault
following the same scheme as centos5-test.
- Images are now uploaded to Amazon Elastic Container Registry (ECR).
See #809.
- Debian recommended packages aren't installed (e.g. build-essential)
- Python 2.x and Python 3.x are installed wherever available.
- Python Virtualenv is installed wherever available.
The Travis Linux distribution must be upgraded because the Trusty
(Ubuntu 14.04) image does not have Python 3.9. Xenial (Ubuntu 16.04) is
the earliest version that offers Python 3.9.
I have not chosen a later release, in order to aid restoration of Python
2.4 - 2.6 tests.
The ansible_mitogen test suite takes over an hour when Ansible is not
accelerated by Mitogen. This change aims to reduce that by skipping
tests with a large number of iterations when the linear strategy is
chosen.
The tagged tests are intended to uncover Mitogen resource leaks. Since
Mitogen is not invoked when strategy=linear, the slight reduction in
test coverage is an acceptable trade off.
These are not part of the official testing regime (tests run for pull
requests). I find them convenient for local development.
Limitations
- Python 2.7+ only. No Python 2.4, 2.5, or 2.6.
- Requires Pythons pre-installed (e.g. DeadSnakes, pyenv)
- No coverage of alternate controller OS (e.g. MacOS)
The environments tested by default are
py27-mode_ansible-ansible2.10
py36-mode_ansible-ansible2.10
py39-mode_ansible-ansible2.10
py27-mode_mitogen
py36-mode_mitogen
py39-mode_mitogen
py27-mode_mitogen-distro_centos7
py36-mode_mitogen-distro_centos7
py39-mode_mitogen-distro_centos7
The environment variable DISTRO is used to set the target Docker image
used when running the Mitogen unit tests. DISTROS is used for the
Ansible integration tests. VER sets the version of Ansible that is
installed on the controller.
When MODE=Mitogen
- there is no need to set VER, because nothing that installs Ansible
- it does not make sense to set DISTROS.
CALLBACK_VERSION et al are documented as required in
https://docs.ansible.com/ansible/2.10/dev_guide/developing_plugins.html#callback-plugins.
The need for document_fragment is noted in
cfa8075537/lib/ansible/plugins/callback/default.py (L28-L32)Fixes#758
This addresses the following error, seen while running
`ansible_tests.py`.
```
TASK [Gathering Facts gather_timeout=10, gather_subset=['all']]
****************
task path:
/home/alex/src/mitogen/tests/ansible/regression/issue_109__target_has_old_ansible_installed.yml:4
[WARNING]: Failure using method (v2_runner_on_start) in callback plugin
(<ansible.plugins.callback.nice_stdout.CallbackModule object at
0x7f76b3dad090>): 'show_per_host_start'
Callback Exception:
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/executor/task_queue_manager.py",
line 372, in send_callback
method(*new_args, **kwargs)
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/plugins/callback/default.py",
line 240, in v2_runner_on_start
if self.get_option('show_per_host_start'):
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/plugins/callback/__init__.py",
line 91, in get_option
return self._plugin_options[k]
Callback Exception:
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/executor/task_queue_manager.py",
line 372, in send_callback
method(*new_args, **kwargs)
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/plugins/callback/default.py",
line 240, in v2_runner_on_start
if self.get_option('show_per_host_start'):
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/plugins/callback/__init__.py",
line 91, in get_option
return self._plugin_options[k]
[task 339882] 00:00:08.172036 D ansible_mitogen.affinity: CPU mask for
WorkerProcess: 0x000004
Callback Exception:
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/executor/task_queue_manager.py",
line 372, in send_callback
method(*new_args, **kwargs)
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/plugins/callback/default.py",
line 240, in v2_runner_on_start
if self.get_option('show_per_host_start'):
File
"/home/alex/src/mitogen/.tox/py27-ansible2.10/lib/python2.7/site-packages/ansible/plugins/callback/__init__.py",
line 91, in get_option
return self._plugin_options[k]
```
- don't create a new connection during reset if no existing connection
exists
- strip off last hop in connection stack if PlayContext.become is True.
- log a debug message if reset cannot find an existing connection
Logs were broken because ADD_ROUTE was being sent *after* messages
started flowing from the new child. That's an explicit non-goal of the
design, so fix it.
The undocumented 'tmp' parameter controls whether _execute_module()
would delete anything on 2.3, so mimic that. This means
_execute_remove_stat() calls will not blow away the temp directory,
which broke the unarchive plugin.
When creating a context using Router.method(via=somechild),
unidirectional mode was set on the new child correctly, however if the
child were to call Router.method(), due to a typing mistake the new
child would start without it.
This doesn't impact the Ansible extension, as only forked tasks are
started directly by children, and they are not responsible for routing
messages.
Add test so it can't happen again.
Previously given something like:
l = mitogen.core.Latch()
l.put(1)
l.put(2)
s = mitogen.select.Select([l], oneshot=False)
assert 1 == s.get(block=False)
assert 2 == s.get(block=False)
The second call would throw TimeoutError, because Select.add() only
queued the receiver/latch once if it was non-empty, rather than once for
each item as should happen.
Move all details of broker/router setup out of connection.py, instead
deferring it to a WorkerModel class exported by process.py via
get_worker_model(). The running strategy can override the configured
worker model via _get_worker_model().
ClassicWorkerModel is installed by default, which implements the
extension's existing process model.
Add optional support for the third party setproctitle module, so
children have pretty names in ps output.
Add optional support for per-CPU multiplexers to classic runs.
Unlike on Debian, some environment variables that tickle
getpass.getuser() are being inherited. So use getuid() instead.
Also install the doas binary on CentOS. CI was changed (I believe) to
shrink the configuration matrix, and now these tests run on CentOS too.
This relies on the previous commit resetting global variables.
Update clean_shutdown() to handle duplicate calls, due to tests
repeatedly installing it.
Split Stream into many, many classes
* mitogen.parent.Connection: Handles connection setup logic only.
* Maintain references to stdout and stderr streams.
* Manages TimerList timer to cancel connection attempt after
deadline
* Blocking setup code replaced by async equivalents running on the
broker
* mitogen.parent.Options: Tracks connection-specific options. This
keeps the connection class small, but more importantly, it is
generic to the future desire to build and execute command lines
without starting a full connection.
* mitogen.core.Protocol: Handles program behaviour relating to events
on a stream. Protocol performs no IO of its own, instead deferring
it to Stream and Side. This makes testing much easier, and means
libssh can reimplement Stream and Side to reuse MitogenProtocol
* mitogen.core.MitogenProtocol: Guts of the old Mitogen stream
implementtion
* mitogen.core.BufferedWriter: Guts of the old Mitogen buffered
transmit implementation, made generic
* mitogen.core.DelineatedProtocol: Guts of the old IoLogger, knows how
to split up input and pass it on to a
on_line_received()/on_partial_line_received() callback.
* mitogen.parent.BootstrapProtocol: Asynchronous equivalent of the old
blocking connect code. Waits for various prompts (MITO001 etc) and
writes the bootstrap using a BufferedWriter. On success, switches
the stream to MitogenProtocol.
* mitogen.core.Message: move encoding parts of MitogenProtocol out to
Message (where it belongs) and write a bunch of new tests for
pickling.
* The bizarre Stream.construct() is gone now, Option.__init__ is its
own constructor. Should fix many LGTM errors.
* Update all connection methods: Every connection method is updated to
use async logic, defining protocols as required to handle interactive
prompts like in SSH or su. Add new real integration tests for at least
doas and su.
* Eliminate manual fd management: File descriptors are trapped in file
objects at their point of origin, and Side is updated to use file
objects rather than raw descriptors. This eliminates a whole class of
bugs where unrelated FDs could be closed by the wrong component. Now
an FD's open/closed status is fused to it everywhere in the library.
* Halve file descriptor usage: now FD open/close state is tracked by
its file object, we don't need to duplicate FDs everywhere so that
receive/transmit side can be closed independently. Instead both sides
back on to the same file object. Closes#26, Closes#470.
* Remove most uses of dup/dup2: Closes#256. File descriptors are
trapped in a common file object and shared among classes. The
remaining few uses for dup/dup2 are as close to minimal as possible.
* Introduce mitogen.parent.Process: uniform interface for subprocesses
created either via mitogen.fork or the subprocess module. Remove all
the crap where we steal a pid from subprocess guts. Now we use
subprocess to manage its processes as it should be. Closes#169 by
using the new Timers facility to poll for a slow-to-exit subprocess.
* Fix su password race: Closes#363. DelineatedProtocol naturally
retries partially received lines, preventing the cause of the original
race.
* Delete old blocking IO utility functions
iter_read()/write_all()/discard_until().
Closes#26Closes#147Closes#169Closes#256Closes#363Closes#419Closes#470
Alex Willmer