On POWER systems, /proc/cpuinfo provides a 'processor' entry as a
counter, and a 'cpu' entry with a description (similar to 'model name'
on x86). Support for POWER in get_cpu_facts was added via the 'cpu'
entry in commit 8746e692c1. Subsequent
support for ARM64 in commit ce4ada93f9
used the 'processor' entry, resulting in double-counting of cores on
POWER systems.
When unit tests were later written for this code in
commit 55306906cf, the erroneous values
were just accepted in the test instead of being diagnosed.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
* Clean up comments in integration tests.
Tests reference soon to be outdated paths and implementation details.
* Remove unused test/runner/ reference in test.
This commit allows users to access a vCenter or a ESXi through a
HTTP CONNECT based proxy.
To do so, the users have to set the `proxy_host` and `proxy_port`
variables.
The can also use the `VMWARE_PROXY_HOST` and `VMWARE_PROXY_PORT`
environment variables.
This feature depends on pyvmomi > v6.7.1.2018.12.
Fixes: #42221
Co-Author: Abhijeet Kasurde <akasurde@redhat.com>
Co-Author: Gonéri Le Bouder <goneri@redhat.com>
* Added unit tests for ansibble_utils.py
* Removed unnecessary print statement
* Updated Ip address as review comment
* Updated as per review comments on IP address and test asserts
* Print warning when both an option and its alias is specified.
* Improve output.
* Put warnings into self._warnings directly, resp. use self.warn() when handling subspecs.
* Add changelog.
* Add unit test.
* Get the most detailed version number from distro.version() for CentOS and Debian
* Update tests and fixtures
* Update fixture generation script to gather distro info and work with Python 3
* Update LinuxMint fixtures
* Cleanup fixture formatting
* Improvements based on feedback from abadger:
- use unicode since that is what distro returns
- use frozenset with a tuple
- include link Debian to bug
* Add tests for KubeAPIVersion
* Legibility improvements for KubevirtVM tests
* Create units.utils.kubevirt with common stuff
* Add some VMIRS unit tests
* Update dependence's name to firepower-kickstart
* Check response type before getting attributes
* Add unit test for construct_ansible_facts method
* Update error message
* Adding device_facts module for contribution
* changes added for pylint error
* Updated code to solve ansible-test compile error
* Changes to avoide comile error added
* Review Comments changes update
* Avoided blank line
* pylint error changes
* Removed ansible_facts return in error case
* Updated description
* modules renamed
* changing from ansible_facts to device_info
* avoide pep8 error
* Updated sample output
* version changed to 2.9
* Changed Copyright license to BSD
* Changed 3-clause BSD license to 2-clause BSD
* Added unit test support for ome_device_info
* version change
* removed pylint error in unit test modules
* Avoid Sanity error for unit test modules
* updated version
* Attempt 2 of cert validation fixes
* Remove unused code
* Cleanup the tmp cert using atexit
* Fix linting issues
* Only add SSLValidationHandler when not HAS_SSLCONTEXT
* Catch value errors on non PEM certs
* Only catch NotImplementedError to avoid masking issues
* set self._context even with PyOpenSSLContext for conformity
* Fix error building
* normalize how we interact with the context we create
* Remove unused code
* Address test for py3.7 message difference
* open_url should pass the ca_path through
* Account for new error in url lookup test
* Guard some code behind whether or not we are validating certs
* Make _make_context public
* Move atexit.register up to where the tmp file is created
- Also return url and update docs for other values to indicate they are only returned on success.
- Add integration tests
- Use info variable for common return values
- Use -1 as default status rather than None. This is lines up with with existing code in urls.py
- Add unit tests to ensure status and url are returned on failure
Ensure the module still work with the ESXi where CustomFieldsManager
does not exist.
From: https://www.vmware.com/support/developer/converter-sdk/conv60_apireference/vim.CustomFieldsManager.html
The CustomFieldsManager object is used to add and remove custom fields to
managed entities.
The custom fields values set on managed entities are available through the
customValue property and through the summary objects for VirtualMachine
and HostSystem. They are not available directly through this managed object.
This functionality is only available through VirtualCenter.
Fixes: #56071
* use navigate_value instead navigate_hash
* add async wait method
* update dict compare
* remove unuse methods
* not all modules have timeouts parameter
* navigate_value, the input data may be None
* remove external grep call and parse with python
* use function for repeated code
* use module.get_bin_path() for iscsiutil on HPUX
* some code opt for HPUX
* clean up non-module code, module being defined is a requirement for this code
* import get_bin_path() directly and use without module prefix
* Add integration tests for AIX and HP-UX
* add changelog fragment
* Apply suggestions from code review
Co-Authored-By: mator <matorola@gmail.com>
* Apply suggestions from code review #2
Co-Authored-By: Sam Doran <sdoran@redhat.com>
* Remove strict requirement on executable to exist for get_bin_path() as
it will allow facts gathering to continue without an error. Almost all
other files under facts do not have "required=True" (except 2 files,
which should be probably fixed). And check return value for
get_bin_path() , before run attempt.
* add check for AIX lsattr run_command return code
Remove test comparing output to platform.linux_distribution() since we are relying on distro.id() and are not concerned about matching the output of platform.linux_distribution()
* netbox_device: Allow device modification
* Add ability to update and existing device
* Allow check_mode
* Fail when device name is missing
* Fail when cannot resolve ID instead of taking ID 1 by default
* netbox_device: Add diff output
* netbox: Some refactoring
* Add diff output and check_mode to netbox_ip_address
* Deduplicate redundant code into netbox_utils
* netbox_utils: A few unit tests
* Add latest updates from FTD Ansible downstream repository.
- add a better implementation of the upsert operation;
- add API version lookup functionality;
- add filter which remove duplicated references from the list of references;
- fix minor bugs.
* fix issues outlined by ansibot
* fix argument name for _check_enum_method
* Add to_ipv6_subnet function
* Use the correct function for subnet
* Corrected code style and tests
* Corrected testcase assertion
64 bits make 8 octets, or 4 hextets
* Import from correct module directly
* Move check_type_str() out of basic.py
* Move check_type_list() out of basic.py
* Move safe_eval() out of basic.py
* Move check_type_dict() out of basic.py
* Move json importing code to common location
* Move check_type_bool() out of basic.py
* Move _check_type_int() out of basic.py
* Move _check_type_float() out of basic.py
* Move _check_type_path() out of basic.py
* Move _check_type_raw() out of basic.py
* Move _check_type_bytes() out of basic.py
* Move _check_type_bits() out of basic.py
* Create text.formatters.py
Move human_to_bytes, bytes_to_human, and _lenient_lowercase out of basic.py into text.formatters.py
Change references in modules to point to function at new location
* Move _check_type_jsonarg() out of basic.py
* Rename json related functions and put them in common.text.converters
Move formatters.py to common.text.formatters.py and update references in modules.
* Rework check_type_str()
Add allow_conversion option to make the function more self-contained.
Move the messaging back to basic.py since those error messages are more relevant to using this function in the context of AnsibleModule and not when using the function in isolation.
* Add unit tests for type checking functions
* Change _lenient_lowercase to lenient_lowercase per feedback
* Adding support for IP identifiers according to https://tools.ietf.org/html/draft-ietf-acme-ip-05.
* Add changelog.
* Make sure that the authorizations return value is unchanged for CSRs with DNS-only SANs.
* Remove unneeded import.
* type -> identifier_type
* Python 2.6 compatibility.
* Fix unit tests.
* Add IP address normalization.
* Extend tests.
* Move data into fixtures.
* Adjust BOTMETA.
- More info added to module docs.
- Fixed errors and typos in module docs.
- Added parameter types to module docs.
- Some error messages are fixed and/or changed to be more helpful.
- Some code comments changed and added.
- Updated unit tests that test changed error messages.
- Improved module examples.
- Improved docs for custom_params xenserver_guest module parameter
Fixes a bug where parse_distribution_file_ClearLinux() was called on CoreOS (and probably many other distros) and it returned True since it successfully parses the distribution file. Since this file exists on many Linux distributions and they are a very similar format, add an additional check to make sure it is Clear Linux.
Change the order in which distribution files are processed so NA is last. This prevents a match on CoreOS hosts since they also have /etc/os-release and the called matching function for NA is very general and will match CoreOS.
* Add changelog
* Add unit tests
Only add tests for Clear Linux parsing since that was the cause of this issue.
* Rename method and make private
* Use is_iterable, combine transformations
* Remove unused return_values from network modules
* Improve docstrings in new functions
* Add new PASS_VAR
* Add unit tests for list_no_log_values
* Fix unit tests for Python 2.6
Refinements:
- return legal_inputs and update class properties
- remove redundant arguments from method and handle in caller
- add better exception types to method
* Add unit tests for handle_aliases
* uri/win_uri: Make method a free text field
Since various interfaces introduce their own HTTP method (e.g. like
PROPFIND, LIST or TRACE) it's better to leave this up to the user.
* Fix HTTP method check in module_utils urls
* Add integration test for method UNKNOWN
* Clarify the change as requested during review
* added validate_certs paramter to allow for ignoring of SSL certificates
* formatting
* updated NSO unit tests with validate_certs variable
* fixed NSO tests
- xenserver module_util: fixed a bug in gather_vm_params function where
an exception was generated if XenServer product_version_text_short
parameter contained non numeric characters, e.g. "7.1 CU1" on
XenServer version 7.1 with Cummulative Update 1. Code was changed
to use product_version parameter instead which is all numeric.
- xenserver module_util: get_xenserver_version function is changed
to return a list of integers for major, minor and update version
instead of list of strings.
- xenserver module_util: unit tests are updated according to changes.
- xenserver module_util: removed unused imports.
* Add support for elements validation in argspec
Fixes#48473
* Add support to validate the elements value in argspec
when type is `list`
* Fix unit test failures
* Add unit test for elements validation
* Fix CI failures
* Fix review comments
* Fix unit test and CI failures after rebase
* Facts parsing for cmdline can now handle multiple values for a single key.
* Unit tests for cmdline fact parsing
* Review comments
Fixes: #22766
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* First pass at allowing unix socket with urls/uri. See #42341
* Only insert handler as needed
* Fix and add tests
* Add HTTPS functionality for unix sockets
* Additional test fixes
* Create context manager for monkey patching HTTPConnection.connect, de-dupe code, raise better errors
* doc
* Add a few more tests
* Fix __call__
* Remove unused import
* Patch HTTPConnection.connect with the functionality we want, instead of duplicating code and disabling
* Fix var name
* Remove unused var
* Add changelog fragment
* Update uri docs
* Fix rebase indentation issue
* Refactored code
* Added support for Cumulus Linux 2.5.4
* Added support for Cumulus Linux 3.7.3
* Test added
Fixes: #29969
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Introduce new "required_by' argument_spec option
This PR introduces a new **required_by** argument_spec option which allows you to say *"if parameter A is set, parameter B and C are required as well"*.
- The difference with **required_if** is that it can only add dependencies if a parameter is set to a specific value, not when it is just defined.
- The difference with **required_together** is that it has a commutative property, so: *"Parameter A and B are required together, if one of them has been defined"*.
As an example, we need this for the complex options that the xml module provides. One of the issues we often see is that users are not using the correct combination of options, and then are surprised that the module does not perform the requested action(s).
This would be solved by adding the correct dependencies, and mutual exclusives. For us this is important to get this shipped together with the new xml module in Ansible v2.4. (This is related to bugfix https://github.com/ansible/ansible/pull/28657)
```python
module = AnsibleModule(
argument_spec=dict(
path=dict(type='path', aliases=['dest', 'file']),
xmlstring=dict(type='str'),
xpath=dict(type='str'),
namespaces=dict(type='dict', default={}),
state=dict(type='str', default='present', choices=['absent',
'present'], aliases=['ensure']),
value=dict(type='raw'),
attribute=dict(type='raw'),
add_children=dict(type='list'),
set_children=dict(type='list'),
count=dict(type='bool', default=False),
print_match=dict(type='bool', default=False),
pretty_print=dict(type='bool', default=False),
content=dict(type='str', choices=['attribute', 'text']),
input_type=dict(type='str', default='yaml', choices=['xml',
'yaml']),
backup=dict(type='bool', default=False),
),
supports_check_mode=True,
required_by=dict(
add_children=['xpath'],
attribute=['value', 'xpath'],
content=['xpath'],
set_children=['xpath'],
value=['xpath'],
),
required_if=[
['count', True, ['xpath']],
['print_match', True, ['xpath']],
],
required_one_of=[
['path', 'xmlstring'],
['add_children', 'content', 'count', 'pretty_print', 'print_match', 'set_children', 'value'],
],
mutually_exclusive=[
['add_children', 'content', 'count', 'print_match','set_children', 'value'],
['path', 'xmlstring'],
],
)
```
* Rebase and fix conflict
* Add modules that use required_by functionality
* Update required_by schema
* Fix rebase issue
* identity: Add GSSAPI suport for FreeIPA authentication
This enables the usage of GSSAPI for authentication, instead of having
to pass the username and password as part of the playbook run.
If there is GSSAPI support, this makes the password optional, and will
be able to use the KRB5_CLIENT_KTNAME or the KRB5CCNAME environment
variables; which are standard when using kerberos authentication.
Note that this depends on the urllib_gssapi library, and will only
enable this if that library is available.
* identity: Add documentation for GSSAPI authentication for FreeIPA
This documentation describes how to use GSSAPI authentication with the
IPA identity modules.
* identity: Add changelog for GSSAPI support for IPA
This adds the changelog entry for the GSSAPI authentication feature for
the IPA identity module.
* Move docker_ module_utils into subpackage.
* Remove docker_ prefix from module_utils.docker modules.
* Adding jurisdiction for module_utils/docker to $team_docker.
* Making docker* unit tests community supported.
* Linting.
* Python < 2.6 is not supported.
* Refactoring docker-py version comments. Moving them to doc fragments. Cleaning up some indentations.
* facts: solaris: introduce distribution_major version detection for Solaris
Currently, there's no distribution_major in facts module on Solaris OS.
Use "uname -r" output to report major version.
Before the patch we get this on Solaris 11.3 :
$ ansible -o solaris11 -m setup -a filter=ansible_distribution_major_version
solaris11 | SUCCESS => {"ansible_facts": {}, "changed": false}
and after this patch, output is the following:
$ ansible -o solaris11 -m setup -a filter=ansible_distribution_major_version
solaris11 | SUCCESS => {"ansible_facts": {"ansible_distribution_major_version": "11"}, "changed": false}
Tested with Solaris 11.3 and Solaris 10 (both are x86_64 VMs)
Includes patch for test/units.
Fixes#18197
* Try to fix test unit
* should work now...
* fixes for W291 (trailing whitespace) and E265 (block comment)
* mock uname_release for solaris 10 and solaris 11
* facts: solaris: introduce distribution_major version detection for Solaris
Currently, there's no distribution_major in facts module on Solaris OS.
Use "uname -r" output to report major version.
Before the patch we get this on Solaris 11.3 :
$ ansible -o solaris11 -m setup -a filter=ansible_distribution_major_version
solaris11 | SUCCESS => {"ansible_facts": {}, "changed": false}
and after this patch, output is the following:
$ ansible -o solaris11 -m setup -a filter=ansible_distribution_major_version
solaris11 | SUCCESS => {"ansible_facts": {"ansible_distribution_major_version": "11"}, "changed": false}
Tested with Solaris 11.3 and Solaris 10 (both are x86_64 VMs)
Includes patch for test/units.
Fixes#18197
* Try to fix test unit
* should work now...
* fixes for W291 (trailing whitespace) and E265 (block comment)
* mock uname_release for solaris 10 and solaris 11
* typo uname_v -> uname_r
* rebase
* fix pep8 E302: 2 blank lines
* remove int() cast to match test case
* use single function for uname_r and uname_v
* add solaris 11.4 OS to distribution test unit
* fix pep8 sanity - E231 missing whitespace
* distribution_major_version variable strip newline
* mocker test function for mock_get_uname with parameters instead of two different functions
* failed to make one fuction with test unit, revert to use 2 different functions
* try to use single get_uname function
* fix pep8: E703
* parallelize getting mount info
* fixed timeout and made 8 max thread count
- minor cleanup
- avoid empty mount entries
- set timeout on get
- enforce timeout per mount/thread
- make note on failure per mount
- make note on timeout per mount
- ensure proper pool control
- minor fixes
- less vars, simpler code
- move filter 'pre threading'
- remove timeout for all mounts, now per mount
- also use cpu count from multiprocessing lib
- moved 'bind' options out of thread as per comments
- warn on error, more info on failure to get info
* removed info declaration from documentation fragment as this is not implemented
* added optional headers for POST and PUT requests
* updated documentation
* added missing headers field decalaration
* removed info choice from state field
* added tests for the new utm_utils function
* fixed class invocation
* added missing required params
* fixed the pytests
* Move get_all_subclasses out of sys_info as it is unrelated to system
information.
* get_all_subclasses now returns a set() instead of a list.
* Don't port get_platform to sys_info as it is deprecated. Code using
the common API should just use platform.system() directly.
* Rename load_platform_subclass() to get_platform_subclass and do not
instantiate the rturned class.
* Test the compat shims in module_utils/basic.py separately from the new
API in module_utils/common/sys_info.py and module_utils/common/_utils.py
* Revert "allow caller to deal with timeout (#49449)"
This reverts commit 63279823a7.
Flawed on many levels
* Adds poor API to a public function
* Papers over the fact that the public function is doing something bad
by catching exceptions it cannot handle in the first place
* Papers over the real cause of the issue which is a bug in the timeout
decorator
* Doesn't reraise properly
* Catches the wrong exception
Fixes#49824Fixes#49817
* Make the timeout decorator properly raise an exception outside of the function's scope
signal handlers which raise exceptions will never work well because the
exception can be raised anywhere in the called code. This leads to
exception race conditions where the exceptions could end up being
hanlded by unintended pieces of the called code.
The timeout decorator was using just that idiom. It was especially bad
because the decorator syntactically occurs outside of the called code
but because of the signal handler, the exception was being raised inside
of the called code.
This change uses a thread instead of a signal to manage the timeout in
parallel to the execution of the decorated function. Since raising of
the exception happens inside of the decorator, now, instead of inside of
a signal handler, the timeout exception is raised from outside of the
called code as expected which makes reasoning about where exceptions are
to be expected intuitive again.
Fixes#43884
* Add a common case test.
Adding an integration test driven from our unittests. Most of the time
we'll timeout in run_command which is running things in a subprocess.
Create a test for that specific case in case anything funky comes up
between threading and execve.
* Don't use OSError-based TimeoutError as a base class
Unlike most standard exceptions, OSError has a specific parameter list
with specific meanings. Instead follow the example of other stdlib
functions, concurrent.futures and multiprocessing and define a separate
TimeoutException.
* Add comment and docstring to point out that this is not hte Python3 TimeoutError
Since the 'platform.dist()' and 'platform.linux_distribution()'
methods will be removed from future versions of python, this
provides an alternative to replace ansibles use of those
methods.
lib/ansible/module_utils/distro.py is a copy of
https://github.com/nir0s/distro/blob/master/distro.py
This module is originally from https://github.com/nir0s/distro
and is license under the Apache License, Version 2.0.
* set ansible_os_family from name variable in os-release for clearlinux system
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add os_family for clear linux and clear linux mixes
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Fix for changes in clearlinux
clearlinux is now providing /etc/os-release file and ansible is identifying as NA
then this change allow ansible to find it
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add changelog fragment for clearlinux changes
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* VMware: Fix module usages in module_utils
* Skip test for Python 2.6 as SSL context is not available in Python 2.6
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* FTD modules: bug fixes and upsert functionality
* Fix sanity checks
* Fix unit tests for Python 2.6
* Log status code for login/logout
* Use string formatting in logging
* More generic comparison code from docker_container to docker_common.
* More flexibility if a is None and method is allow_to_present.
Note that this odes not affect docker_container, as there a is never None.
* Update docker_secret and docker_config: simplify labels comparison.
* Added unit tests.
* Use proper subsequence test for allow_more_present for lists.
Note that this does not affect existing code in docker_container, since lists
don't use allow_more_present. Using allow_more_present will only be possible
in Ansible 2.8.
* pep8
* Move ansible.compat.tests to test/units/compat/.
* Fix unit test references to ansible.compat.tests.
* Move builtins compat to separate file.
* Fix classification of test/units/compat/ dir.
* Separate networking tools that may be used by modules outside of networking so changes to networking-only utilities don't trigger AWS integration tests
* Add unit tests for moved network utils
* Add comment to prevent imports from being mistakenly removed
* Move to_bits as well
* Add common and Swagger client utils for FTD modules
* Update FTD HTTP API plugin and add unit tests for it
* Add configuration layer handling object idempotency
* Add ftd_configuration module with unit tests
* Add ftd_file_download and ftd_file_upload modules with unit tests
* Validate operation data and parameters
* Fix ansible-doc, boilerplate and import errors
* Fix pip8 sanity errors
* Update object comparison to work recursively
* Add copyright
* Remove use of simplejson throughout code base. Fixes#42761
* Address failing tests
* Remove simplejson from contrib and other outlying files
* Add changelog fragment for simplejson removal
Now that we don't need to worry about python-2.4 and 2.5, we can make
some improvements to the way AnsiballZ handles modules.
* Change AnsiballZ wrapper to use import to invoke the module
We need the module to think of itself as a script because it could be
coded as:
main()
or as:
if __name__ == '__main__':
main()
Or even as:
if __name__ == '__main__':
random_function_name()
A script will invoke all of those. Prior to this change, we invoked
a second Python interpreter on the module so that it really was
a script. However, this means that we have to run python twice (once
for the AnsiballZ wrapper and once for the module). This change makes
the module think that it is a script (because __name__ in the module ==
'__main__') but it's actually being invoked by us importing the module
code.
There's three ways we've come up to do this.
* The most elegant is to use zipimporter and tell the import mechanism
that the module being loaded is __main__:
* 5959f11c9d/lib/ansible/executor/module_common.py (L175)
* zipimporter is nice because we do not have to extract the module from
the zip file and save it to the disk when we do that. The import
machinery does it all for us.
* The drawback is that modules do not have a __file__ which points
to a real file when they do this. Modules could be using __file__
to for a variety of reasons, most of those probably have
replacements (the most common one is to find a writable directory
for temporary files. AnsibleModule.tmpdir should be used instead)
We can monkeypatch __file__ in fom AnsibleModule initialization
but that's kind of gross. There's no way I can see to do this
from the wrapper.
* Next, there's imp.load_module():
* https://github.com/abadger/ansible/blob/340edf7489/lib/ansible/executor/module_common.py#L151
* imp has the nice property of allowing us to set __name__ to
__main__ without changing the name of the file itself
* We also don't have to do anything special to set __file__ for
backwards compatibility (although the reason for that is the
drawback):
* Its drawback is that it requires the file to exist on disk so we
have to explicitly extract it from the zipfile and save it to
a temporary file
* The last choice is to use exec to execute the module:
* https://github.com/abadger/ansible/blob/f47a4ccc76/lib/ansible/executor/module_common.py#L175
* The code we would have to maintain for this looks pretty clean.
In the wrapper we create a ModuleType, set __file__ on it, read
the module's contents in from the zip file and then exec it.
* Drawbacks: We still have to explicitly extract the file's contents
from the zip archive instead of letting python's import mechanism
handle it.
* Exec also has hidden performance issues and breaks certain
assumptions that modules could be making about their own code:
http://lucumr.pocoo.org/2011/2/1/exec-in-python/
Our plan is to use imp.load_module() for now, deprecate the use of
__file__ in modules, and switch to zipimport once the deprecation
period for __file__ is over (without monkeypatching a fake __file__ in
via AnsibleModule).
* Rename the name of the AnsiBallZ wrapped module
This makes it obvious that the wrapped module isn't the module file that
we distribute. It's part of trying to mitigate the fact that the module
is now named __main)).py in tracebacks.
* Shield all wrapper symbols inside of a function
With the new import code, all symbols in the wrapper become visible in
the module. To mitigate the chance of collisions, move most symbols
into a toplevel function. The only symbols left in the global namespace
are now _ANSIBALLZ_WRAPPER and _ansiballz_main.
revised porting guide entry
Integrate code coverage collection into AnsiballZ.
ci_coverage
ci_complete
d7df072b96 changed how we call
journal.send() from positional arguments to keyword arguments. So we
need to update the test to check for the arguments it was called with in
the keyword args, not in the positional args.
* Properly handle default package manager vs apt
For distros where apt might be installed but is not the default
package manager for the distro, properly identify the default distro
package manager during fact finding and re-use fact finding from
DistributionFactCollector and instead of reimplementing small
portions of it in PkgMgrFactCollector
Add unit test to always check the apt + Fedora combination to test
the new code.
Fixes#34014
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove q debugging output I accidentally left behind
Signed-off-by: Adam Miller <admiller@redhat.com>
* add os_family to the conditional so we're only hitting that code path when needed
Signed-off-by: Adam Miller <admiller@redhat.com>
* setup for a _check* pattern for general os_family group pkg_mgr checking
Signed-off-by: Adam Miller <admiller@redhat.com>
* use Mock.patch decorator for os.path.exists in TestPkgMgrFactsAptFedora
Signed-off-by: Adam Miller <admiller@redhat.com>
Move dict_merge from azure_rm_resource module to
module_utils.common.dict_transformations and add tests.
Use dict_merge to provide a fairly realistic, reliable
diff output when k8s-based modules are run in check_mode.
Rename unit tests so that they actually run and reflect
the module_utils they're based on.
* Fix tmpdir on non root become
- also avoid exception if tmpdir and remote_tmp are None
- give 'None' on deescalation so tempfile will fallback to it's default behaviour
and use system dirs
- fix issue with bad tempdir (not existing/not createable/not writeable)
i.e nobody and ~/.ansible/tmp
- added tests for blockfile case
* Revert "Temporarily revert c119d54"
This reverts commit 5c614a59a6.
* changes based on PR feedback and changelog fragment
* changes based on the review
* Fix tmpdir when makedirs failed so we just use the system tmp
* Let missing remote_tmp fail
If remote_tmp is missing then there's something more basic wrong in the
communication from the controller to the module-side. It's better to
be alerted in this case than to silently ignore it.
jborean and I have independently checked what happens if the user sets
ansible_remote_tmp to empty string and !!null and both cases work fine.
(null is turned into a default value controller-side. empty string
triggers the warning because it is probably not a directory that the
become user is able to use).
* Issue #39860: Add 'not_contains' method to parsing.py
* Issue #30860 Adds self.negate to Conditional class in lib/ansible/module_utils/network/common/parsing.py
* Issue #39860 Fix singleton-comparison issue per sanity tests
* Issue #39860 'test/integration/targets/nxos_command/tests/cli/not_comparison_operator.yaml' integration test
* Issue #39860 Add unit tests to '../../test/units/module_utils/network/common/test_parsing.py'
* Issue #39860 Fix singleton comparison issue
* Fix E302 expected 2 blank lines, found 1
* Issue #39860 Add license header to unit tests
* Issue #39860 Move integration test to 'test/integration/targets/nxos_command/tests/common/'; remove unnecessary comment from unit test
* Issue #39860 remove unnecessary comment from unit test
When parsing the distribution files such as /etc/os-release, we extract
the full distribution version but not the major version. As such, the
ansible_distribution_major_version ends up being 'NA' whereas the
ansible_distribution_version contains the full version.
Before this patch we get this on openSUSE Leap 15
ansible -o localhost -m setup -a filter=ansible_distribution_major_version
localhost | SUCCESS => {"ansible_facts": {"ansible_distribution_major_version": "NA"}, "changed": false}
After this patch we get this
ansible -o localhost -m setup -a filter=ansible_distribution_major_version
localhost | SUCCESS => {"ansible_facts": {"ansible_distribution_major_version": "15"}, "changed": false}
This also fixes the Tumbleweed distribution test to report a proper
major version and also adds a test for openSUSE Leap 15.0 to avoid
potential future regressions.
Fixes: #41410
* Adds requests.Session like class
* py2 syntax fix
* Add a few examples to the Request docstrings
* Add helper methods and docs
* Fix test failures
* Switch tests to test Request instead of open_url, add simple open_url test to validate funcitonality
* Fix filename in replace-urlopen code smell test
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* to resolve the bug 40709
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* to fix shippable nios automation error
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* shippable error fix
* shippable error fix
* shippable error fix
* shippable error fix
* shippable error fix
* review comment fix
* shippable error fix
* shippable error fix
When running the test test/units/module_utils/urls/test_open_url.py
test_open_url_no_validate_certs, the test fails because of the SSLv2
check.
Test is run on a machine using openssl 1.1.0g. By reading the openssl
man page[1], one can see that support for SSLv2 has been removed.
> Support for SSLv2 and the corresponding SSLv2_method(),
> SSLv2_server_method() and SSLv2_client_method() functions where removed
> in OpenSSL 1.1.0.
>
> SSLv23_method(), SSLv23_server_method() and SSLv23_client_method() were
> deprecated and the preferred TLS_method(), TLS_server_method() and
> TLS_client_method() functions were introduced in OpenSSL 1.1.0.
Hence this commit remove the uses of this flag when it is not defined.
[1] https://www.openssl.org/docs/man1.1.0/ssl/SSLv23_method.html
* create module tmpdir based on remote_tmp
* Source remote_tmp from controller if possible
* Fixed sanity test and not use lambda
* Added expansion of env vars to the remote tmp
* Fixed sanity issues
* Added note around shell remote_tmp option
* Changed fallback tmp dir to ~/.ansible/tmp to make shell defaults
* Allow subspec defaults to be processed when the parent argument is not supplied
* Allow this to be configurable via apply_defaults on the parent
* Document attributes of arguments in argument_spec
* Switch manageiq_connection to use apply_defaults
* add choices to api_version in argument_spec
* Adding slxos_config module and supporing util functions.
* Adding slxos module_utils load_config test
* Adding slxos_config module tests
* Removing unneeded required false statements from slxos_config module
* Removing version_aded from slxos_config module
* Removing force and save from slxos config module
* Removing save test
* Adding slx_command module and supporting module_utils.
This commit adds the slx_command module and tests as well as the
required slxos module_utils.
* Update copyright in header
* Adding missing module init
* Cleaning up shebangs/licensing.
* Incorporating feedback
Removing reference to `waitfor` alias in `slxos_command` module.
Adding `Extreme Networks` to `short_description` of `slxos_command` module.
* Adding cliconf tests
* Fixing 3.X tests
* Adding docstrings to test methods for slxos cliconf tests
* Adding slxos terminal tests
* Adding slxos module_utils tests
* Adding Extreme Networks team members to BOTMETA.yml
* Handle duplicate headers, and make it easier for users to use cookies, by providing a pre-built string
* Ensure proper cookie ordering, make key plural
* Add note about cookie sort order
* Add tests for duplicate headers and cookies_string
* Extend tests, normalize headers between py2 and py3
* Add some notes in test code
* Don't use AttributeError, use six.PY3. Use better names.
* Start of tests for ansible.module_utils.urls
* Start adding file for generic functions throughout urls
* Add tests for maybe_add_ssl_handler
* Remove commented out line
* Improve coverage of maybe_add_ssl_handler, test basic_auth_header
* Start tests for open_url
* pep8 and ignore urlopen in test_url_open.py tests
* Extend auth tests, add test for validate_certs=False
* Finish tests for open_url
* Add tests for fetch_url
* Add fetch_url tests to replace-urlopen ignore
* dummy instead of _
* Add BadStatusLine test
* Reorganize/rename tests
* Add tests for RedirectHandlerFactory
* Add POST test to confirm behavior is to convert to GET
* Update tests to handle recent changes to RedirectHandlerFactory
* Special test, just to confirm that aliasing http_error_308 to http_error_307 does not cause issues with urllib2 type redirects
NSO operations can take much longer than 10 seconds as they operate on
real network equipment, set default timeout to 5 minutes and allow for
user override.
False assumption that values can not have cyclic dependencies. Fix by
removing dependency on self and look for cycles, if found remove
dependency to get a partial sort done.
Fix issues in ValueBuilder used in nso_config and nso_verify so that it
can handle leaf-list in NSO 4.5 and detect identityref types from
unions.
Fail gracefully if a type is not found.
* allows ib_spec attrs to be filtered in update
This change will allow the ib_spec entries to be be filtered on a change
object by setting the update keyword to false. The default value for
update is true. When the update keyword is set to false, the keyed
entry will be removed from the update object before it is sent to the
api endpoint.
fixes#36563
* fix up pep8 issues
Matt Martz