When using an empty string as the version argument, the module would
before attempt to run something akin to:
pip install module==""
This changes the behavior to:
pip install module
Fixes#41043
* Refactor ios cliconf plugin and ios_config module
* Refactor ios cliconf plugin to support generic network_config module
* Refactor ios_config module to work with cliconf api's
* Enable command and response logging in cliconf pulgin
* cliconf api documentation
* Fix unit test and other minor changes
* Doc update
* Fix CI failure
* Add default flag related changes
* Minor changes
* redact input command logging by default
* Updating tower_job_template.py
* tower_job_template: Update parameter version_added to 2.7
* Ensure that unset credentials aren't passed
Passing empty strings for unset credentials causes ValueErrors as
the API expects an integer. Don't pass unset credentials
* tower_inventory_source: Add support for the inventory source via ansible-tower-cli.
* Add test coverage for tower_inventory_source.
* Update version_added to 2.7
* diff in as-path-set or prefix-set
* fix caveat diff can not have last line with comma in prefix-set/as-path/community-set
* Simplify fix to include indentation before parse
* remove debugger
* route-policy diffs
* fix iosxr_config crash issue
* new changes in iosxr_config after git add
* end-policy-map and end-class-map are properly indented so match misplaced children only when end-* is at the beigining also fix pep8
* Remaining config blocks of route-policy which needs exclusion from diff. added new tests
* pylint/pep8 warnings
* Review comments , sanity test fix
* shbang warning
* remove unused import
* Fix test-module failing to validate args
The test-module pass a wrong argument _ansible_tmp cause the validation failed.
Change the argument _ansible_tmp to _ansible_tmpdir to fix this.
* Add a integration test for test-module.
Prior to this change, we don't have a test for test-module.
This change ensure the correctness of test-module script.
* Adds requests.Session like class
* py2 syntax fix
* Add a few examples to the Request docstrings
* Add helper methods and docs
* Fix test failures
* Switch tests to test Request instead of open_url, add simple open_url test to validate funcitonality
* Fix filename in replace-urlopen code smell test
* Support 'apply' to apply attributes to included tasks
* Cannot validate args for task_include
* Only allow apply on include_
* Re-enable arg validation, but only for include_tasks and import_tasks
* s/task/ir/
* Add tests for include_ apply
* Include context with AnsibleParserError
* Add docs for apply
* version_added
* Add free-form documentation back
* Add example of free-form with apply
* First pass at a src parameter that can be used in place of body. Supports binary files
* Add test for uri src body
* Bump version_added to 2.6
* Close the open file handle
* Add uri action plugin that handles src/remote_src
* Document remote_src
* Remove duplicate info about remote_src
* Bump version_added to 2.7
* Fixes ios_logging idempotency issues
* Added intergration tests & minor fixes
* Minor fixes in tests
* Minor fixes in tests #2
* eos_logging fixes after PR review
* Adding changed option to save_when for aireos
* Deprecating save option for aireos_config.
* Updating version_added to 2.7 since the PR missed the window for 2.6
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* to resolve the bug 40709
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* to fix shippable nios automation error
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* shippable error fix
* shippable error fix
* shippable error fix
* shippable error fix
* shippable error fix
* review comment fix
* shippable error fix
* shippable error fix
* All instances of local connection should use _remote_is_local=True. Fixes#40551
* Switch to instance attribute for synchronize
* Add test that shows that synchronize _remote_is_local addresses tmpdir building
* Move k8s modules to dynamic backend
* update required openshift version
* update -> patch
* use new dynamic client exceptions
* style
* guard urllib3 import
* guard ansibleerror import
* give more information about error cause
* format in variable
* style
* rename tests
* Search for provided kind in a few more places to match old behavior, properly handle failure
* make common code use fail instead of fail_json, to work for lookup plugins as well
* update docs
* move openshift_raw tests into k8s tests
* fix typo
* Use diff of response and resource to determine change, don't do any checking client-side before making requests
* remove duplicate yaml blocks
* Update porting guide for k8s module
* remove invalid doc refs
* If fuzzy searching finds a resource, update resource_definition to match proper kind and version
* remote unsupported openshift_raw variables
* properly check environment variables when determining auth method:
* Remove 1.1.1.1 from *_config tests
* remove from *_smoke and *_system
* Miscellaneous other tests
* Remove from module documentation as well
* Remove from unit tests as well
* Remove accidental duplication from rebase
* Add a module to create a java key store (jks) from a certificate
* Create a jks from a certificate and a private key (secured by a password)
* Add an option to recreate the jks (useful when you want to update the jks password)
* If the certificate changed, recreate the jks
* Version added is now 2.7
* Return the expected prompt character based on become status
* Update eos_banner tests for eapi
* Update eos_config tests for eapi
* Update eos_facts tests for eapi
* Update eos_interface tests for eapi
* Update eos_l3_interface tests for eapi
* Update eos_lldp tests for eapi
* Update eos_logging tests for eapi
* Update eos_smoke tests for eapi
* Update eos_system tests for eapi
* nxos_vlan fix
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* uncomment mode test as nxapi now has get_capabilities
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* First pass at vmware_deploy_ovf functionality
* Add OVA file support, re-structure code
* Move some useful functions to module_utils.vmware, and perform a little DRY too
* Better handling of errors during spec validation and import
* Properly calculate the lease progress percentage for all vmdk files
* Make warnings and errors a little better
* Add an allow_duplicates argument, that defaults to true, to allow users to have name based idempotency
* Add fail_on_spec_warnings to cause the module to treat warnings as errors
* Support non-vmdk uploads
* Add ova alias for ovf
* Rename vmdk_post_url to device_upload_url so it does not sound to specific to VMDK files
* Safer handling of * hostname in urls
* Add default Content-Type, remove unused headers var
* Add deploymentOptions and propertyMapping functionalities
* Add basic check_mode support
* Add vmware_deploy_ovf to list of use-argspec-type-path ignores
* Update version_added and fix path for use-argspec-type-path
* Add configurable folder
* Doc changes
* Add nxos_install_os integration tests
* Update call to check timers
* Update check_ansible_timer method
* Modify network_cli integration tests
* Add timer check for nxos_install_os
* Add comments for clear_persistent_sockets
* Update connection info for tests
* More updates
* Restructure files for provider and non-provider testing
* Update env var name and add check for ISSU switchover
* Add support for `mysqldump`'s `--ignore_table` switch.
* Fix documentation and default linter warning re: default parameter
* Add number to replacement field in cmd string
* Bump version_added to 2.7
* Initial commit for meraki_admin module
* Initial commit for meraki_snmp module
* Update code to be operational for SNMP settings
- Add optional_ignore value to is_update_required for one-time fields
- Write documentation
- Perform checks and execute changes
* Minor fixes and test improvements
- Fix some documentation errors
- Implement and test for idempotency
* Removed meraki_admin which shouldn't be there, ansibot changes
* Rename params to be lower case
- Updated integration tests
- Changed CamelCase to lowercase and underscore
* Code cleanup changes based on comments from Dag.
* Port aws_ses_identity module to use AnsibleAWSModule
* Support Check Mode in aws_ses_identity
* Add tests for check mode
* Move feedback forwarding parameter check to before any changes are made.
* Fixed check_mode status to be the same as normal execution
* Now when setting the status to `disabled` in check_mode it correctly
returns the state changed and prints a warning like it does in normal
model. Before it always returned changed even if everything was set
correctly and a reboot was required.
* Add changelog entry
Co-authored by: Strahinja Kustudic <kustodian@gmail.com>
* Added interpreter parameter to the script module
* Let required and default parameters get documented implicitly for binary parameter
* Renamed interpreter parameter to executable
When running the test test/units/module_utils/urls/test_open_url.py
test_open_url_no_validate_certs, the test fails because of the SSLv2
check.
Test is run on a machine using openssl 1.1.0g. By reading the openssl
man page[1], one can see that support for SSLv2 has been removed.
> Support for SSLv2 and the corresponding SSLv2_method(),
> SSLv2_server_method() and SSLv2_client_method() functions where removed
> in OpenSSL 1.1.0.
>
> SSLv23_method(), SSLv23_server_method() and SSLv23_client_method() were
> deprecated and the preferred TLS_method(), TLS_server_method() and
> TLS_client_method() functions were introduced in OpenSSL 1.1.0.
Hence this commit remove the uses of this flag when it is not defined.
[1] https://www.openssl.org/docs/man1.1.0/ssl/SSLv23_method.html
* The module now correctly sets the timezone in both the config file and
in /etc/localtime; while hwclock is set in both the config and
/etc/adjtime.
* Module checks if the timezone is actually set by checking
/etc/localtime. Before it only checked if it was set in the config file.
* Fixed module not setting the timezone on RedHat systems if
/etc/localtime was a symbolic link.
* Fixed module failures in case of missing config files or incorrect data
in them.
* Added a lot of integrations tests to cover most of these situations.
* cs_instance: implement host migration support
* fix build
* fail fast on update if user is not admin
* improve tests a bit
* expunge it
* fix typo
* disable temporarly verify for host on starting instance.
Add `mode` option which sets permission mode of a VM in octet format
Add `owner_id` and `group_id` which set the ownership of a VM
Move the waiting for state at the end of the module, so it could fail faster if there is some error
tagged_instances will only be returned only if count_attributes and/or count_labels are used, as specified in the documentation
Update relevant tests
Add tests for mode, owner_id, group_id
* Fix errors decrypted non-ascii vault vars
AnsibleVaultEncryptedUnicode was just using b"".decode()
instead of to_text() on the bytestrings returned from
vault.decrypt() and could cause errors on python2
if non-ascii since decode() defaults to ascii.
Use to_text() to default to decoding utf-8.
add intg and unit tests for value of vaulted vars
being non-ascii utf8
based on https://github.com/ansible/ansible/issues/37258Fixes#37258
* yamllint fixups
* Adding module for AWS Config service
* adding integration tests
* Split resource types into their own modules
* Properly use resource_prefix and retry on IAM "eventual consistency"
* Add config aggregator module
* AWS config aggregator integration test fixes
* AWS config recorder module
* Config aggregation auth rule
* Use resource_prefix in IAM role name
* Disable config tests
* Fix setting the cache when refresh_cache or --flush-cache are used
* Use jsonify function that handles datetime objects in jsonfile cache plugin
* Don't access self._options directly
* Add initial integration tests for aws_ec2 inventory plugin
* Add CI alias
* Fix and add a few more unit tests
* Add integration tests for constructed
* Fix typo
* Use inventory config templates
* Collect all instances that are not terminated by default
* Create separate playbook for setting up the VPC, subnet, security group, and finding an image for the host
Create a separate playbook for removing the resources
* Allow easier grouping by region and add an example
* use a unified json encode/decode that can handle unsafe and vault
* Refactor ec2_group
Replace nested for loops with list comprehensions
Purge rules before adding new ones in case sg has maximum permitted rules
* Add check mode tests for ec2_group
* add tests
* Remove dead code
* Fix integration test assertions for old boto versions
* Add waiter for security group that is autocreated
* Add support for in-account group rules
* Add common util to get AWS account ID
Fixes#31383
* Fix protocol number and add separate tests for egress rule handling
* Return egress rule treatment to be backwards compatible
* Remove functions that were obsoleted by `Rule` namedtuple
* IP tests
* Move description updates to a function
* Fix string formatting missing index
* Add tests for auto-creation of the same group in quick succession
* Resolve use of brand-new group in a rule without a description
* Clean up duplicated get-security-group function
* Add reverse cleanup in case of dependency issues
* Add crossaccount ELB group support
* Deal with non-STS calls to account API
* Add filtering of owner IDs that match the current account
* New module = AWS Glue connection
* Add a few initial integration tests
* Add alias for CI
* module rename
* finish module rename
* add loop when getting glue connection again so we dont get None
* Limit number of retries to get new glue connection info
* New ansible module netconf_rpc
* add integration test for module netconf_rpc
* pep8/meta-data corrections
* usage of jxmlease for all XML processing
separation of attributes "rpc" and "content"
* removed unused imports
improved error handling
* fixed pep8
* usage of ast.literal_eval instead of eval
added description to SROS integration test for cases commented out
* mismatch type between function arguments
* add testcase for prompt
* yamllint issues
* remove overwriting response in case of connectionError exception
* remove import of ConnectionError as it is not required
* add loadbalancer
* dict check nullable
* add default vallue when get list
* create backend addr pool
* fix the set
* fix to dict
* fix ideponement
* use param security group name when create
* nic can has no nsg
* add test
* fix
* fix
* fix
* add document
* add configuration
* fix
* fix
* remove all resources
* fix
* fix test
* add version added
* fix lint
* fix lint
* Fixes some NIC bugs (#39213)
* add loadbalancer
* dict check nullable
* add default vallue when get list
* create backend addr pool
* fix the set
* fix to dict
* fix ideponement
* use param security group name when create
* nic can has no nsg
* add test
* fix
* fix
* fix
* fix idemponet
* add document
* fix test
* add configuration
* fix
* fix
* remove all resources
* fix
* fix test
* add version added
* fix lint
* fix lint
* fix lint
* remove new feature and only submit bugfix
* remove useless test
* fix
* fix indent
* Update azure_rm_networkinterface.py
* fix comment
* support 3 types to specific name and resource group
* avoid test racing
* fix test
* add sample
* add resource id test
* winrm: add better exception handling for krb5 auth with pexpect
* Added changelog fragment
* Added exception handler in case kinit path isn't valid, added test cases
* fixed for Python 2 compatibility
* win_updates: add scheduled tasks back in for older hosts
* Fixed up typo in category name error message
* Fixed up some minor issues after merge
* added changelog fragment
* Default to become but add override to use scheduled tasks
* Added basic unit tests for win_updates
* fix minor typos
* parted module not idempotent for esp flag and name
Fixes#40452
Currently the parted module doesn't take into account names with
spaces in them which leads to non-idempotent transactions on the
state of the system because the name comparison will never succeed.
Also, when the esp flag is set, parted infers the boot flag and the
parted module did not previously account for this. This lead to
non-idempotent transactions as well.
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix unit tests, expected command changed in the patch
Signed-off-by: Adam Miller <admiller@redhat.com>
Change the command to get the interface in a vlan "show vlan" => "show vlan brief"
Change the parsing of the return command of the switch.
The return of the ios command is fixed so i cut with fix number of carracter.
Adding looking for the next line to add the forgeted interfaces.
* fixing azure sanity tests
* fixing sanity
* fixing some tags issues
* removed unnecessary things from managed disk
* fixed location problem
* more sanity fixes
* sanity test fixes
* final sanity fixes?
* final fixes again
* undo changes related to container instance
* removed container instance
* readd again
* fixed stupid mistake
* removed _azure from changes
* one more mistake
* Return messages generated from edit_config to module
* This does not seem to work that way
* Change test IP addresses to not conflict with device config
* Set encrypted as default and fix empty password reporting changed
* Starting with Postgres 10 `UNENCRYPTED` passwords are removed and
because of that this module fails with the default `encrypted=no`.
Also encrypted passwords are suported since version 7.2
(https://www.postgresql.org/docs/7.2/static/sql-createuser.html) which
went EOL in 2007 and since 7.3 it is the default. Because of this it
makes a lot more sense to make `encrypted=yes` the default. This won't
break backward compatibility, the module would just update the user's
password in the DB in the hashed format and everything else will work
like before. It's also a security bad practice to store passwords in
plain text. fixes#25823
* There was also a bug with `encrypted=yes` and an empty password always
reported as changed.
* Improved documentation for `encrypted`/`password` parameters, and
removed some obsolete notes about passlib.
* Fix clearing user's password to work with all versions of Postgres
* Add tests for clearing the user password
* Fix documentation atfer rebase
* Add changelog fragment
* I seem to have forgotten the back half of tests
* Set http timeout from persistent_command_timeout
* Tweak URL generation and provide URL on error
* Push var_options to connection process
* Don't wait forever if coming from persistent
* Don't send the entire contents of variables to ansible-connection
* Fix all cases with pause and ctrl+c
- naked:
- pause:
- with prompt
- pause: prompt=hi
- time wait
- pause: seconds=60
- time wait with prompt
- pause: seconds=60 prompt=hi
Fixes#35372
* Use curses to control stdout
* Use curses to clear lines on interactive input
* Validate input for echo parameter and fail nicely if invalid
* Add integration tests for pause module using pexpect
* Use try except when trying to determine erase sequence to account for lack of TTY in containers in tests
* Improve output validation for regular paus test
* Accept two digit precision for pause length in test
* Check for seconds when seconds is specificed, minutes when minutes is specified
* Add test for no TTY mode
Co-authored by: Toshio Kuratomi <a.badger@gmail.com>
Co-authored by: Brian Coca <brian.coca+git@gmail.com>
* Add the ability to specify an install_dir to the gem module
* Add GEM_HOME when installing a non-global gem
* Add tests for custom gem path
* Fix sanity tests
* Add changelog entry
* Rebase and add tests for incorrect options
Co-authored by: Antoine Catton <devel@antoine.catton.fr>
* * Memset:
* module_utils and associated documentation.
* module to manage DNS zones.
* integration tests to run against Memset's API.
* * memset.py:
* remove import of requests from memset.py in favour of internal Ansible modules.
* import necessary Ansible modules for request and response handling.
* create a response object in order to retain a stable interface to memset_api_call from existing modules.
* rework memset_api_call to remove requests.
* memset_zone.py:
* improve short description to be more verbose.
* ensure all imports directly follow documentation.
* remove any reference to requests.
* correct keyerror carried over from elsewhere.
* remove dependency on requests from documentation string
* disable integration tests until we have a cleanup method available
* HTTPAPI connection
* Punt run_commands to cliconf or httpapi
* Fake enable_mode on eapi
* Pull changes to nxos
* Move load_config to edit_config for future-preparedness
* Don't fail on lldp disabled
* Re-enable check_rc on nxos' run_commands
* Reorganize nxos httpapi plugin for compatibility
* draft docs for connection: httpapi
* restores docs for connection:local for eapi
* Add _remote_is_local to httpapi
* add pytest_cache to gitignore
* onepassword lookup plugin
* fix linter/style test complaints
* second pass at making pycodestyle happy
* use json module instead of jq
* update copyrights, license & version added
* fix python2 compatibility
* doh. fix spacing issue.
* use standard ansible exception
* remove potentially problematic stdin argument
* actually call assertion method
* add support for top-level fields
* make vault uuids pedantically consistent in fixture
* fix new style issues
* ability specify section & correct case handling
* improve error handling
* add onepassword_raw plugin
* Add maintainer info
* Move common code to module_utils/onepassword.py
* Load raw data JSON data for easier use in Ansible
* Put OnePass class back inside lookup plugin
There is no good place for sharing code across lookups currently.
* Remove debugging code in unit tests
* Patche proper module in raw unit tests
* Add changelog entry
Co-authored-by: Scott Buchanan <sbuchanan@ri.pn>
handle incorrect data type in list lookup plugin
Fixes#35481
test to ensure that loops properly handle incorrect datatypes
Signed-off-by: Adam Miller <admiller@redhat.com>
* - add tests for s3_lifecycle
- fix a bug comparing transitions with different storage_types
* make s3_lifecycle work with boto3
* add noncurrent version lifecycle rules
* Change behavior to behaviour
- use existing fact to get hash setting rather than shell task
- fix code highlighting syntax in playbooks_variables.rst
* Re-wrote intro section; this entire topic needs a clean-up/rewrite.
* Do not join flag parameters
This put a comma between every character of the tcp flag parameters, resulting in a bad iptables command.
Fixes#36490
* Use suboptions to ensure tcp_flags options are lists
* Add unit tests for tcp_flags
* Add example of how to use tcp_flags
* Added gitlab_hooks module and related tests
* Fix sanity check issues
* Refactor to use common util method, add check_mode support
* Fix module shebang
* Added module gitlab_deploy_key and related tests
* Fix sanity check issues
* Refactor to use common util method, add check_mode support
* Fix module shebang
* Fix failing aws_ses_identity integration tests
Reduce boilerplate with yaml anchor
* remove unstable test alias
* Update feedback forwarding check to use desired state rather than
repeated API calls.
* uri: Add form-urlencoded support to body_format
This PR adds form-urlencoded support so the user does not need to take
care of correctly encode input and have the same convenience as using
JSON.
This fixes#37182
* Various fixes
* Undo documentation improvements
No longer my problem
* Fix the remaining review comments
* Allow negative values to expires to unexpire a user
Fixes#20096
(cherry picked from commit 34f8080a19)
(cherry picked from commit 54619f70f4)
(cherry picked from commit 8c2fae27d6)
(cherry picked from commit db1a32f8ca)
* tweaked and normalized
- also added tests, made checking resilient
Using Ubuntu 14.04, test fails because 'blkid' < 2.21 doesn't recognize
'ocfs2' filesystem smaller than 108Mo:
6baa150398
filesystem: fix MKFS_FORCE_FLAGS for ocfs2
mkfs.ocfs2 -F won't work because mkfs.ocfs2 asks for a confirmation:
$ mkfs.ocfs2 -F img
mkfs.ocfs2 1.6.4
Cluster stack: classic o2cb
Overwriting existing ocfs2 partition.
WARNING: Cluster check disabled.
Proceed (y/N):
The undocumented 'x' switch must be used too.
add new line and update choice documentation
adding description for ocfs2 support
use correct variable ansible_distribution to test ocfs2 with Debian
distribution
use ansible_os_family for Debian
increase ocfs2 fs size to 20M (minimal size 11 instead of 10M)
add ocfs2 support for module filesystem
Update setup.yml
delete trailing spaces
add ocsfs2 defaut var
Install ocfs2-tools for all linux
Testing ocfs2 on for Ubuntu - restrict blkid to be be done
* Add setup ignore_errors for nxos_config test
* Fix parse_fan_info for n3k
* Skip bidir tests for N3k
* Omit vni config for n3k
* Skip unsupported nxos_vrf_af test on N3K
* Add legacy N3K platform tag
* Modifying cnos-facts, cnos_command and cnos-config in line with the design followed in Ansible. Adding unit test cases for these modules. Added plugins to support them.
* Removing doc fragment conflicts with other modules
* Replacing show with display
* improved scaleset facts
* scaleset facts fix some errors
* adding version_added for format param
* trying to break lines
* fixed syntax
* small code restructuring
* fix syntax
* fixed now
* add new test to scaleset / scaleset facts
* make scaleset test more clear
* temporarily comment out...
* try to retrieve scaleset facts
* try to add postfix
* fixed mistake
* fixed problem when no loadbalancer attached
* fixed another bug
* fixed sanity and a few other
* fixed pep8
* another try
* changed ansible to curated
* updated tests
* updated example and a few other mods
* small fixes
* removed unnecessary pass
* removed some items from ignore.txt
* remove file added by mistake
* add aks module and integration tests
* linting
* update tests
* sanity check
* make some changes to AKS module
* make integration test work
* add fact
* add resource_group name
* add fact test
* fix test
* fix test
* linting
* changed line endings for facts
* output kubeconfig
* Update azure_rm_aks.py
* update integration test aliases
* update aliases
* add cloud_environment and auth_source to args
* Fix comments from Jborean93 (#3)
* update
* fix
* fix
* fix
* fix
* update doc
* fix
* Set src in the state functions rather than the toplevel
A good API should only require passing one version of a piece of data
around so do that for src
* Move the rewriting of path into additional_parameter_handling
When the path is a directory we can rewrite the path to be a file inside
of the directory
* Emit a warning when src is used with a state where it should be ignored
Fixes several bugs exposed in #34893
* Fixes relative path handling in copy so that it splits directories and
reconstructs the correct file path
* Return failed in the proper circumstances
* WIP Pull persistent connection parameters via get_option
* Fix pep8
* Add use_persistent_connection setting to paramiko_ssh plugin
* Add vars section to persistent_command_timeout setting and prevail provider values over config manager
* Use persistent_command_timeout on network_cli instead of timeout
* Fix unit tests
If we don't call loader to get network_cli, then _load_name is never
set and we get KeyError.
* Pull persistent_command_timeout via config manager for ios connection local
* Pull persistent_command_timeout via config manager on connection local
* Initial commit
* Socket Timeout and dest file handler
* sftp handling
* module name change as per review
* multiple thread tmp file overwite problem
* Integration test suite for network_put
* add additional testcase for dest argument
* fix pylint/pep8/modules warnings
* add socket timeout for get_file
* network_get module
* pep8 issue on network_get
* Review comments
* New module for CRUD functionality of networks in a Meraki environment
- Relatively full integration test suite
- More functions to come
* Fix indent for PEP8.
- Look into why this didn't show on a local PEP8 test
* Dag requested changes.
- Removed a section in get_net as its backend isn't implemented
- Documentation modifications
* Improved integration testing and results
- Added get_org() function to return data for single org
- Added a lot of new integration tests
- Changed result now shows, still probably could be better
* Fix formatting errors for PEP8
* New module: ec2_vpc_vpn_facts
* Add integration tests for ec2_vpc_vpn_facts and the IAM permissions
* Add retry to VPC removal
* Use unique name for VGW
* Always clean up after tests and add retries
* create module tmpdir based on remote_tmp
* Source remote_tmp from controller if possible
* Fixed sanity test and not use lambda
* Added expansion of env vars to the remote tmp
* Fixed sanity issues
* Added note around shell remote_tmp option
* Changed fallback tmp dir to ~/.ansible/tmp to make shell defaults
* fix problem with documentation and param definition difference
* removed some E324 from ignore.txt
* fixed mistake
* remove one more E324
* removed function app
* fixing append tags
* leaving append tags for later
pip 10 gives exit code 1 for empty argument lists (pip < 10 gave exit 0)
see also https://github.com/pypa/pip/pull/4210
To still allow playbooks to pass when giving empty lists, don't call
pip in that case, but show a warning.
Check datatype of device instead of comparing them directly in
vmware_guest. Also, added testcases to check this behavior.
DPVG is not supported in current version vcsim
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Previously the test framework (DCI, Zuul) were installing the various
dependencies, this meant the list of what was required was duplicated.
Having everything defined in ansible-test makes it easier for people to
run tests locally.
Also this allows the test to work correctly on Python 2 & Python 3
* Add members to bigip_gtm_pool
* Add monitors to bigip_gtm_pool
* Add availability_requirements to bigip_gtm_pool
* Refactor bigip_gtm_pool
* Normalize the product value returned by gtm facts
* Corrected various documentation
* Updated various F5 coding conventions
* Add partition to bigip_static_route
* Added more unit tests
* Refactor bigip_gtm_virtual_server
* Add translation_address to bigip_gtm_virtual_server
* Add translation_port to bigip_gtm_virtual_server
* Add availability_requirements to bigip_gtm_virtual_server
* Add monitors to bigip_gtm_virtual_server
* Add virtual_server_dependencies to bigip_gtm_virtual_server
* Add link to bigip_gtm_virtual_server
* Add limits to bigip_gtm_virtual_server
* Add partition to bigip_gtm_virtual_server
* Fix bigip_gtm_server to correctly create other server types
* Add type to virtual_server
* Add address_translation to virtual_server
* Add port_translation to virtual_server
* Add ip_protocol to virtual_server
* Add firewall_enforced_policy to virtual_server
* Add firewall_staged_policy to virtual_server
* Add security_log_profiles to virtual_server
* configurable list of facts modules
- allow for args dict for specific modules
- add way to pass parameters
- avoid facts poluting test
- move to 'facts gathered' flag
- add 'gathering' setting tests
* Removed forwarders parameter that did not work
* Updated coding conventions
* Added ssl_cipher_suite and ssl_protocols to bigip_device_httpd
* Added more unit tests
This PR includes:
- Fixes to the majority of module validation issues
(deliberate inconsistencies between docs and arg_spec)
- Removal of deprecated parameters 'method' and 'protocols'
- A few typos in the documentation
There are still some left-over validation errors, some are deliberate
(like doc strings as default to indicate ranges, etc.)
- Works with the --remote option.
- Can be disabled with the --disable-httptester option.
- Change image with the --httptester option.
- Only load and run httptester for targets that require it.
* handle end-policy issue
* revert changes in iosxr cliconf
* fix trailing parents not included in difference
* Moving fix to platform specific fix
* pep 8 issues
* fix become_method 'doas' support by properly specifying becomecmd
a repatch of https://github.com/ansible/ansible/pull/13451/ which was never committed to 'devel' branch.
* fix play_context test for become_method doas to match new becomecmd
* Allow subspec defaults to be processed when the parent argument is not supplied
* Allow this to be configurable via apply_defaults on the parent
* Document attributes of arguments in argument_spec
* Switch manageiq_connection to use apply_defaults
* add choices to api_version in argument_spec
* base64 filter: Added ability to specify encoding
* Added unicode chars for further testing
* Removed errors to keep previous behaviour in place
* Removed surrogate pairs due to issues loading YAML in CI
* Prevent using action/local_action on includes and imports. Fixes#28822
* Use ModuleArgsParser to determine action instead of disallowing action/local_action with import/include
* Add to_native
* switch back to block in task_ds, use ModuleArgsParse otherwise
* var should be task_ds
* Add test validating action+include_tasks
Fix ios integration test failures in CI. Since the packet transfer and receive rate
on the interface is not determined to remove the tx_rate and rx_rate test conditions
to prevent intermittent failure.
* create internal loadbalancer
* fix test
* remove duplicate test
* clean up
* fix doc
* lint
* add sku support
* update version
* change to the version the same as CLI
* add pip support sku
* fix lint
* fix test
* Update main.yml
* add changelog entry
* Pull the tests for state=link into their own file
* Pull tests for what happens when dest is a directory out
* Expand both of the above sets of tests
* vdirect modules: fix 'import' sanity test
* Remove passing file from import skip list.
* vdirect modules: fix validate-modules warnings
- Arguments with a default should not be marked as required
- add choices in doc
* vdirect_runnable: use formatting function
There was a traceback when setting permissions on a directory tree when
there were broken symlinks inside of the tree and follow=true. chmod -R
ignores broken symlinks inside of the tree so we've fixed the file
module to do the same.
Fixes#39456
* Fix for file module with symlinks to nonexistent target
When creating a symlink to a nonexistent target, creating the symlink
would work but subsequent runs of the task would fail because it was
trying to operate on the target instead of the symlink.
Fixes#39558
* Initial commit
Query an organization within Meraki. No support is in place for managing
or creating yet
* Change output_level method and make the state parameter required.
* Implemented listing all organizations
- Updated documentation
- Parse results and return all organizations
- Parse results and return specified organization
* Framework for creating an organization
- Documentation example for organization creation
- Framework exists for creating organizations, pending PR 36809
- Created functions for HTTP calls
- Renamed from dashboard.meraki.com to api.meraki.com
- Added required_if for state
* Remove absent state
- Meraki API does not support deleting an organization so absent is removed
- Updated documentation to call it state instead of status
* Small change to documentation
* Support all parameters associated to organization
- Added all parameters needed for all organization actions.
- None of the added ones work at this time.
- Added documentation for clone.
* Integration test for meraki_organization module
* Rename module to meraki for porting to module utility
* Meraki documentation fragment
- Created initial documentation fragment for Meraki modules
* Add meraki module utility to branch. Formerly was on a separate branch.
* CRU support for Meraki organization module
* CRU is supported for Meraki organizations
* There is no DELETE function for organizations in the API
* This code is very messy and needs cleanup
* Create and Update actions don't show status as updated, must fix
* Added Meraki module utility to module utility documentation list
* Added support for organization cloning
* Renamed use_ssl to use_https
* Removed define_method()
* Removed is_org()
* Added is_org_valid() which does all org sanity checks
* Fixes for ansibot
- Changed default of use_proxy from true to false
- Removed some commented out code
- Updated documentation
* Changes for ansibot
- Removed requirement for state parameter. I may readd this.
- Updated formatting
diff --git a/lib/ansible/module_utils/network/meraki/meraki.py b/lib/ansible/module_utils/network/meraki/meraki.py
index 3acd3d1038..395ac7c4b4 100644
--- a/lib/ansible/module_utils/network/meraki/meraki.py
+++ b/lib/ansible/module_utils/network/meraki/meraki.py
@@ -42,7 +42,7 @@ def meraki_argument_spec():
return dict(auth_key=dict(type='str', no_log=True, fallback=(env_fallback, ['MERAKI_KEY'])),
host=dict(type='str', default='api.meraki.com'),
name=dict(type='str'),
- state=dict(type='str', choices=['present', 'absent', 'query'], required=True),
+ state=dict(type='str', choices=['present', 'absent', 'query']),
use_proxy=dict(type='bool', default=False),
use_https=dict(type='bool', default=True),
validate_certs=dict(type='bool', default=True),
diff --git a/lib/ansible/modules/network/meraki/meraki_organization.py b/lib/ansible/modules/network/meraki/meraki_organization.py
index 923d969366..3789be91d6 100644
--- a/lib/ansible/modules/network/meraki/meraki_organization.py
+++ b/lib/ansible/modules/network/meraki/meraki_organization.py
@@ -20,11 +20,9 @@ short_description: Manage organizations in the Meraki cloud
version_added: "2.6"
description:
- Allows for creation, management, and visibility into organizations within Meraki
-
notes:
- More information about the Meraki API can be found at U(https://dashboard.meraki.com/api_docs).
- Some of the options are likely only used for developers within Meraki
-
options:
name:
description:
@@ -32,21 +30,18 @@ options:
- If C(clone) is specified, C(name) is the name of the new organization.
state:
description:
- - Create or query organizations
- choices: ['query', 'present']
+ - Create or modify an organization
+ choices: ['present', 'query']
clone:
description:
- Organization to clone to a new organization.
- type: string
org_name:
description:
- Name of organization.
- Used when C(name) should refer to another object.
- type: string
org_id:
description:
- ID of organization
-
author:
- Kevin Breit (@kbreit)
extends_documentation_fragment: meraki
@@ -86,7 +81,6 @@ RETURN = '''
response:
description: Data returned from Meraki dashboard.
type: dict
- state: query
returned: info
'''
@@ -103,6 +97,7 @@ def main():
argument_spec = meraki_argument_spec()
argument_spec.update(clone=dict(type='str'),
+ state=dict(type='str', choices=['present', 'query']),
)
@@ -125,11 +120,9 @@ def main():
meraki.function = 'organizations'
meraki.params['follow_redirects'] = 'all'
- meraki.required_if=[
- ['state', 'present', ['name']],
- ['clone', ['name']],
- # ['vpn_PublicIP', ['name']],
- ]
+ meraki.required_if = [['state', 'present', ['name']],
+ ['clone', ['name']],
+ ]
create_urls = {'organizations': '/organizations',
}
@@ -162,23 +155,16 @@ def main():
-
- # method = None
- # org_id = None
-
-
- # meraki.fail_json(msg=meraki.is_org_valid(meraki.get_orgs(), org_name='AnsibleTestOrg'))
-
if meraki.params['state'] == 'query':
- if meraki.params['name'] is None: # Query all organizations, no matter what
- orgs = meraki.get_orgs()
- meraki.result['organization'] = orgs
- elif meraki.params['name'] is not None: # Query by organization name
- module.warn('All matching organizations will be returned, even if there are duplicate named organizations')
- orgs = meraki.get_orgs()
- for o in orgs:
- if o['name'] == meraki.params['name']:
- meraki.result['organization'] = o
+ if meraki.params['name'] is None: # Query all organizations, no matter what
+ orgs = meraki.get_orgs()
+ meraki.result['organization'] = orgs
+ elif meraki.params['name'] is not None: # Query by organization name
+ module.warn('All matching organizations will be returned, even if there are duplicate named organizations')
+ orgs = meraki.get_orgs()
+ for o in orgs:
+ if o['name'] == meraki.params['name']:
+ meraki.result['organization'] = o
elif meraki.params['state'] == 'present':
if meraki.params['clone'] is not None: # Cloning
payload = {'name': meraki.params['name']}
@@ -193,7 +179,10 @@ def main():
payload = {'name': meraki.params['name'],
'id': meraki.params['org_id'],
}
- meraki.result['response'] = json.loads(meraki.request(meraki.construct_path('update', org_id=meraki.params['org_id']), payload=json.dumps(payload), method='PUT'))
+ meraki.result['response'] = json.loads(meraki.request(meraki.construct_path('update',
+ org_id=meraki.params['org_id']),
+ payload=json.dumps(payload),
+ method='PUT'))
diff --git a/lib/ansible/utils/module_docs_fragments/meraki.py b/lib/ansible/utils/module_docs_fragments/meraki.py
index e268d02e68..3569d83b99 100644
--- a/lib/ansible/utils/module_docs_fragments/meraki.py
+++ b/lib/ansible/utils/module_docs_fragments/meraki.py
@@ -35,6 +35,7 @@ options:
description:
- Set amount of debug output during module execution
choices: ['normal', 'debug']
+ default: 'normal'
timeout:
description:
- Time to timeout for HTTP requests.
diff --git a/test/integration/targets/meraki_organization/aliases b/test/integration/targets/meraki_organization/aliases
new file mode 100644
index 0000000000..ad7ccf7ada
--- /dev/null
+++ b/test/integration/targets/meraki_organization/aliases
@@ -0,0 +1 @@
+unsupported
* Formatting fix
* Minor updates due to testing
- Made state required again
- Improved formatting for happier PEP8
- request() now sets instance method
* Fix reporting of the result
* Enhance idempotency checks
- Remove merging functionality as the proposed should be used
- Do check and reverse check to look for differences
* Rewrote and added additional integration tests. This isn't done.
* Updated is_update_required method:
- Original and proposed data is passed to method
- Added ignored_keys list so it can be skipped if needed
* Changes per comments from dag
- Optionally assign function on class instantiation
- URLs now have {} for substitution method
- Move auth_key check to module utility
- Remove is_new and get_existing
- Minor changes to documentation
* Enhancements for future modules and organization
- Rewrote construct_path method for simplicity
- Increased support for network functionality to be committed
* Changes based on Dag feedback and to debug problems
* Minor fixes for validitation testing
* Small changes for dag and Ansibot
- Changed how auth_key is processed
- Removed some commented lines
- Updated documentation fragment, but that may get reverted
* Remove blank line and comment
* Improvements for testing and code simplification
- Added network integration tests
- Modified error handling in request()
- More testing to come on this
- Rewrote construct_path again. Very simple now.
* Remove trailing whitespace
* Small changes based on dag's response
* Removed certain sections from exit_json and fail_json as they're old
* ec2_vpc_route_table: Update matching_count parsing on find_subnets function and tests
* ec2_vpc_route_table: Update matching_count parsing on find_subnets function
* Stabilize ec2_vpc_vgw and ec2_vpc_vpn so tests for ec2_vpc_vpn_facts in PR 35983 can be run in CI
* Add updated placebo recordings
* ensure find_vgw uses the virtual gateway id if available
Add AWSRetry.jittered_backoff to attach_vpn_gateway to deal with errors when attaching a new VPC directly after detaching
Add integrations tests for ec2_vpc_vgw
* Sort VPN Gateways by ID
* vyos_interface require multiple network nodes to run
We don't have the ability to run these currently, so disable them.
The original logic was also incorrect, the tests don't pass on lab, DCI
nor single instance nodepool, so disable
https://github.com/ansible/ansible/issues/39667 tracks getting these
enabled again
* eth0 -> Gi0/0
* Correctly detect if we should run lldp
* Correctly detect if we should run lldp
* Add helpful failure message if target_type=ip is not supported
Create test case for target_type=ip not supported
* Update elb_target_group module to latest standards
Use AnsibleAWSModule
Improve exception handling
Improve connection handling
Improve naming of one of the cloudfront tasks
Change test_identifier back to resource_prefix now it's always
lower case.
More tests around using distribution_id and default_root_object
* Fix eos_vlan associated interface check
Fix eos_vlan associated interface check by comparing
the interface in want and have without converting the
interface name to lower
* Update eos_vlan docs
* Only change expiration date if it is different
Modify user_info() method to also return the password expiration.
Compare current and desired expiration times and only change if they are different.
* Improve formatting on user tests
* Add integration test for expiration
* Add changelog fragment
* Improve integration test
Skip macOS and use getent module for validating expiration date.
* Fix expiration change for FreeBSD
* Don't use datetime since the total_seconds method isn't available on CentOS 6
* Use better name for expiration index field
Use separate tasks for verifying expiration date on BSD
* Use calendar.timegm() rather than time.mktime()
calendar.timegm() is the inverse of time.gmtime() and returns a timestamp in UTC not localtime
Add tests that change the system timezone away from UTC
* Mark tests as destructive and use test for change status
* Fix account expiration for FreeBSD
Use DATE_FORMAT when setting expiration date on FreeBSD. Previously the argument passed to -e was an integer of days since epoch when the account will expire which was inserted directly into master.passwd. This value is interpreted as seconds since epoch by the system, meaning the account expiration was actually set to a few hours past epoch.
Greatly simply comparing desired and current expiration time by using the first three values of the struct_time tuple rather than doing a whole bunch of manipulations of the seconds since epoch.
* should not need <>, but fails without
* adds anchor to keywords page, uses it on plugins pages
* fixes envvar link errors
* harmonize file name and ref name as python_3
* removes undefined-lable from ignore list
This is a test in response to #27262 but I could not provoke the error
so it only shows that the current code is working with non-ascii
filenames in this case. It doesn't show whether there's some other bug
somewhere.
* task_executor.py: Raise 'conditional exception' in case of 'include_*'
Fixes#33632
Signed-off-by: Patrick Ringl <patrick_@freenet.de>
* Re-organize tests, add static include test with undefined var
* Remove unnecessary conditional
* Fixes for mode=preserve
* Document mode=preserve for template and copy
* Make mode=preserve work with remote_src for copy
* Make mode=preserve work for template
* Integration tests for copy & template mode=preserve
Fixes#39279
* Changed mode option in win_copy to hidden option as it doesn't reflect copy mode
* Fix#26755 by ensuring that the first nic in the nic list has primary set to True, and all other nics have primary set to False.
* Fix sanity issues and add test for two nics
* Fix typo in test
* fix nic list
* Ensure the niclist variable is used rather than a niclist string
* Add tests just for dual nic, reverting changes to single nic VM creation tests
* Correct idempotency test
Enable awsvpc network mode for ECS services and tasks and
their underlying task definitions
Improve test suite to thoroughly test the changes
Use runme.sh technique to run old and new versions of botocore to
ensure that the modules work with older botocore and older network modes
and fail gracefully if awsvpc network mode is used with older botocore
* a refactor of pool member and node modules to be inline with current f5 conventions
* Added priority_group_activation to pools
* various other small convention fixes and bug fixes
* Adds gnat provisioning to bigip_provision
* Adds special handling for AFM in bigip_provision
* Add device rebooting for provisioning as necessary
* Refactored route domain module to be inline with current f5 conventions
* Minor refactors across modules
* add loadbalancer
* dict check nullable
* add default vallue when get list
* create backend addr pool
* fix the set
* fix to dict
* fix ideponement
* use param security group name when create
* nic can has no nsg
* add test
* fix
* fix
* fix
* fix idemponet
* add document
* fix test
* add configuration
* fix
* fix
* remove all resources
* fix
* fix test
* add version added
* fix lint
* fix lint
* fix lint
* remove new feature and only submit bugfix
* remove useless test
* fix
* psexec: new module to run commands on a remote Windows host without WinRM
* fix up sanity issue, create test firewall rule for SMB traffic
* Fixed up yaml linting issues, trying to fix on the fly firewall rule
* Added SMB exception to catch when cleaning up PAExec exe
* Don't load profile for Azure hosts when becoming another user
* Fixed up example to use correct option
* Reworded notes section of module docs
* Simplified module options around process integrity levels and the system account
* Improve ec2_ami tests
Ensure that ec2_ami_image_id fact gets set immediately after AMI
creation so that they get torn down even if tests fail
Use YAML anchor to simplify AWS credential passing
Use aws_connection_info to reduce AWS credential boilerplate
Improve exception handling when updating image attributes
Error messages weren't correctly formatted to show image ids.
* VMware: apply correct value for datacenter in TC
Signed-off-by: Tim Steinbach <tim@nequissimus.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Adding slxos_config module and supporing util functions.
* Adding slxos module_utils load_config test
* Adding slxos_config module tests
* Removing unneeded required false statements from slxos_config module
* Removing version_aded from slxos_config module
* Removing force and save from slxos config module
* Removing save test
* Add yarn module based off of NPM module, adjust syntax for install cmd
* Update author list
* Add Return docbloc
* Remove extra var assignment
* Always return output without emojis, small changes for yarn 0.16.1
* Move import line, add ANSIBLE_METADATA, bump version_added
* Updating module format to meet newest lint requirements. Update options and example docs.
* Bring back RETURN block and main() execution.
* All trailing whitespace removed.
* Remove json try/except.
* Add initial pass at setting up Yarn integration tests.
* Add better handling for latest and removal states. Add tests for upgrading a single package.
* Fix issue where state=latest for installing all packages caused failure.
* Set yarn bin to latest version for tests. Fix sanity tests.
* Switch template task to copy task in yarn integration tests.
* Remove raw byte-strings from cliconf plugins of supported platforms + edgeos
Remove uses of to_bytes, too
* Update CliConfBase docstring to reflect current position on byte strings
* Fix the function_name handling logic for lambda_policy
Switch the logic handling function_names that are ARNs
so that ARNs are correctly handled and detected
* Add tests for lambda_policy function_arn
Ensure that function_arn works.
Needs a reasonable ansible_lambda_role.
* Skip self._parent on dynamic, defer to grandparent for attr lookup
* Revert _inheritable
* Add tests for include inheritance from static blocks
Fixes#38037#36194
If user does not specify any network type then set network type
to dhcp. There are additional checks around 'ip', 'netmask' and
'type' in network spec.
Fixes: #38466
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Include change classification data in metadata.
* Add support for disabled tests.
* Add support for unstable tests.
* Add support for unsupported tests.
* Overhaul integration aliases sanity test.
* Update Shippable scripts to handle unstable tests.
* Mark unstable Azure tests.
* Mark unstable Windows tests.
* Mark disabled tests.
* Add include_import tests for many top level include_tasks
Rename a few test playbooks to make more sense
* Use fewer include_tasks due to memory limits in CI
* Adding slx_command module and supporting module_utils.
This commit adds the slx_command module and tests as well as the
required slxos module_utils.
* Update copyright in header
* Adding missing module init
* Cleaning up shebangs/licensing.
* Incorporating feedback
Removing reference to `waitfor` alias in `slxos_command` module.
Adding `Extreme Networks` to `short_description` of `slxos_command` module.
* Adding cliconf tests
* Fixing 3.X tests
* Adding docstrings to test methods for slxos cliconf tests
* Adding slxos terminal tests
* Adding slxos module_utils tests
* Adding Extreme Networks team members to BOTMETA.yml
* fix inventory plugin source caching
- avoid caching invetnory sources in loader in base
- same fix for yaml plugin
- idem for 'auto' plugin
fixes#37162
* fix mock dataloader func sig
This commit moves code to look for vars files/dirs to a common place and
uses it for loading role defaults/vars. This allows things such as
'defaults/main' or 'vars/main' being a directory in a role, allowing
splitting of defaults/vars into multiple files. This commit also fixes
the role loading unit tests for py3 when bytestrings are used for paths
instead of utf8 strings.
This fixes#14248 and #11639.
* get_url should accept headers as a dict, instead of only a complicated string
* update headers description text
* Add headers string and dict tests for get_url
* Add intg test for string header format parsing error
* Adjust deprecation version ahead 1 release, add the version dict format was added in to description
* Handle duplicate headers, and make it easier for users to use cookies, by providing a pre-built string
* Ensure proper cookie ordering, make key plural
* Add note about cookie sort order
* Add tests for duplicate headers and cookies_string
* Extend tests, normalize headers between py2 and py3
* Add some notes in test code
* Don't use AttributeError, use six.PY3. Use better names.
* Error if a module is found to shadow a reserved keyword
* Add test for shadowed module
* Bring in functools.wraps for the decorator
* Drop the decorator, make _find_plugin the real function, find_plugin now holds the shadow logic
* Swap order of functions for bottom to top execution order
* Only error for modules
* Add test for loading a lookup plugin that shadows a keyword
* Start of tests for ansible.module_utils.urls
* Start adding file for generic functions throughout urls
* Add tests for maybe_add_ssl_handler
* Remove commented out line
* Improve coverage of maybe_add_ssl_handler, test basic_auth_header
* Start tests for open_url
* pep8 and ignore urlopen in test_url_open.py tests
* Extend auth tests, add test for validate_certs=False
* Finish tests for open_url
* Add tests for fetch_url
* Add fetch_url tests to replace-urlopen ignore
* dummy instead of _
* Add BadStatusLine test
* Reorganize/rename tests
* Add tests for RedirectHandlerFactory
* Add POST test to confirm behavior is to convert to GET
* Update tests to handle recent changes to RedirectHandlerFactory
* Special test, just to confirm that aliasing http_error_308 to http_error_307 does not cause issues with urllib2 type redirects
Currently, when ones run the module in check_mode it tries to retrieve
values from the actual certificate generated in the generate() function.
Since in check_mode we call dump() without calling generate(), self.cert
is None, leading to self.cert.get_notBefore(), self.cert.get_notAfter()
and self.cert.get_serial_number() raising an error.
> NoneType' object has no attribute 'get_notBefore'
The solution is to have two way to handle dump() method, whether its run
in check_mode=True or check_mode=False leading to different way the
information is retrieved.
* Required changes to support redirects on HTTP 307/308
This ensures HTTP 307 and 308 will redirect the request to the new
location without modification.
* Fix the unused newheaders reference
* Be more compliant
* Add integration tests for follow_redirects=all
* Improve other tests for new behaviour
* Make follow_redirects values more strict
* added eos_smoke tests
* removed left over file
* added note to uncomment broken eapi test when #36919 is fixed
* uncommented fixed test, added unbecome test
* skip become tests when connection=local
* Added module win_pester and relatives integration tests
* Corrected issues as stated by ansible-test
* Added defaults variable in integration tests
* Added task to install Pester if needed in the integration test
* Corrected error in win_psmodule task
* Added Pester installation with Chocolatey when Powershell version < 5
* Get facts...
* Disabled invoke-pester output
* Added pester_result type
* Added jhawkesworth changes proposal
* Corrected documentation linting
* Corrected linting
* Added dagwieers recommendations
* Added dagwieers recommendations
* Corrected linting errors and task error in integration test
* Corrected error in integration test
* Added dagwieers recommendations
* Corrected requirements in the DOCUMENTATION block
This offers an optimization that allows loading larger
inventories of various structure by improving the
scaling laws involved for adding hosts and groups.
The primary speed benefit is the elimination of duplicate
recusion from traversing converging paths.
* tolerate windows line endings when loading windows module utils. Helpful for old custom windows modules.
* add test modules to demonstrate win line ending module load behaviour.
* attempt to fix sanity check failures
* pep8 fix
* explict skip of test modules from shebang check (core modules must still have expected unix style line endings)
* switch to rstrip() following core team meeting feedback
* Add aws_ses_identity_policy module for managing SES sending policies
* Add option to AnsibleAWSModule for applying a retry decorator to all calls.
* Add per-callsite opt in to retry behaviours in AnsibleAWSModule
* Update aws_ses_identity_policy module to opt in to retries at all callsites.
* Add test for aws_ses_identity_policy module with inline policy.
* Remove implicit retrys on boto resources since they're not working yet.
* Add OpenNebula one_image_facts module
`one_image_facts` - module for gathering facts about OpenNebula images
Add integration tests
* Add an alias for ids
* Mark UCS integration tests as unsupported.
* Mark various connection tests as unsupported.
* Mark win_domain_group test as unsupported.
* Mark java_cert test as unsupported.
* Mark synchronize-buildah test as unsupported.
* Mark various AWS tests as unsupported.
* Mark azure_rm_acs test as unsupported.
* Mark GCP tests as unsupported.
* stabilize ec2_vpc_subnet module
* Add waiters for ec2_vpc_subnet
Clean up integration tests
* Reenable CI for stabilized ec2_vpc_subnet tests
* rename waiters
* Use module_json_aws where applicable
Handle WaiterError first if waiting failed
* Fix traceback when tagging with keys/values that look like booleans
* Fix check mode with tags
* Add integration tests for tags that look like booleans and check mode
* Add waiter for deleting subnet
* Sleep a few seconds after using aws command line
* Use AnsibleAWSModule to simplify AWS connection
* Add Exception handling, pagination, retries and backoff
* Allow events to be switched off
* Allow details to be obtained without having to specify services
This is required if we want to ensure that #36809 doesn't cause any
important behavioral changes.
This PR changes the uri module to support follow_redirects=urllib2
It also adds a better error message when the connection closes before
any data was returned.
* module_common: set required parameter templar
Fix the following error (related to b455901):
$ ./hacking/test-module -m ./lib/ansible/modules/system/ping.py -I ansible_python_interpreter=/usr/bin/python
Traceback (most recent call last):
File "./hacking/test-module", line 268, in <module>
main()
File "./hacking/test-module", line 249, in main
(modfile, modname, module_style) = boilerplate_module(options.module_path, options.module_args, interpreters, options.check, options.filename)
File "./hacking/test-module", line 152, in boilerplate_module
task_vars=task_vars
File "ansible/lib/ansible/executor/module_common.py", line 910, in modify_module
environment=environment)
File "ansible/lib/ansible/executor/module_common.py", line 736, in _find_module_utils
shebang, interpreter = _get_shebang(u'/usr/bin/python', task_vars, templar)
File "ansible/lib/ansible/executor/module_common.py", line 452, in _get_shebang
interpreter = templar.template(task_vars[interpreter_config].strip())
AttributeError: 'NoneType' object has no attribute 'template'
* module_common.modify_module: templar is required
* Fix apt tests
* Enable the test in CI
* Additional fixes not discovered locally
* Don't break mysql tests and fix for 14.04 upgrade
* Remove not needed when cond
* Add shebang to fix-udev script
* Remove workaround in favor of rebuilding containers
* Remove leftover script
SGs created when a VPC ID was not specified would not necessarily
get the default egress rule, even when no explicit egress rules
were set.
Add some checks for egress rules in results from existing tests
The generated file was completely unusable by the system
therefore the fix which ensures that diffing the file
prior to changes and after only shows diffs
Furthermore the code did not work for Python 3.6
> f.writelines(to_bytes(lines, errors='surrogate_or_strict'))
E TypeError: a bytes-like object is required, not 'int'
The other modifications (lambda variable renaming) is to
comply with default flake8 rules
* Fix 'New Vault password' on vault 'edit'
ffe0ddea96 introduce a
change on 'ansible-vault edit' that tried to check
for --encrypt-vault-id in that mode. But '--encrypt-vault-id'
is not intended for 'edit' since the 'edit' should always
reuse the vault secret that was used to decrypt the text.
Change cli to not check for --encrypt-vault-id on 'edit'.
VaultLib.decrypt_and_get_vault_id() was change to return
the vault secret used to decrypt (in addition to vault_id
and the plaintext).
VaultEditor.edit_file() will now use 'vault_secret_used'
as returned from decrypt_and_get_vault_id() so that
an edited file always gets reencrypted with the same
secret, regardless of any vault id configuration or
cli options.
Fixes#35834
* Use arg_spec type for comparisons on default and choices
* Further improve type casting
* Make sure to capture output in more places
* Individually report invalid choices
* Update ignore.txt after resolving merge conflicts
Fixes#37208
If check_mode is enabled instead of committing th config need to
discard all the chnages to cnadidate db
In case of cli to discard changes issue `rollback 0` command
and for netconf execute `discard-changes` rpc call
* Add tests using a variable in tasks_from field
Related to #32503
* Do not test using hostvars with import_role
hostvars cannot be used with import_role — use include_role instead
* template: Add integration tests for `lstrip_blocks'
Signed-off-by: Alex Tsitsimpis <alextsi@arrikto.com>
* template: Fix passing `trim_blocks' inline
Fix passing `trim_blocks' option to the template module as inline
argument. Previously passing the `trim_blocks' option inline instead of
using the YAML dictionary format resulted in it always being set to
`True', even if `trim_blocks=False' was used.
Signed-off-by: Alex Tsitsimpis <alextsi@arrikto.com>
* template: Add option to `lstrip_blocks'
Add option to set `lstrip_blocks' when using the template module to
render Jinja templates. The Jinja documentation suggests that
`trim_blocks' and `lstrip_blocks' is a great combination and the
template module already provides an option for `trim_blocks'.
Note that although `trim_blocks' in Ansible is enabled by default since
version 2.4, in order to avoid breaking things keep `lstrip_blocks'
disabled by default. Maybe in a future version it could be enabled by
default.
This seems to address issue #10725 in a more appropriate way than the
suggested.
Signed-off-by: Alex Tsitsimpis <alextsi@arrikto.com>
* template: Add integration tests for `trim_blocks'
Signed-off-by: Alex Tsitsimpis <alextsi@arrikto.com>
* template: Check Jinja2 support for `lstrip_blocks'
Since the `lstrip_blocks' option was added in Jinja2 version 2.7, raise
an exception when `lstrip_blocks' is set but Jinja2 does not support it.
Check support for `lstrip_blocks' option by checking `jinja2.defaults'
for `LSTRIP_BLOCKS' and do not use `jinja2.__version__' because the
latter is set to `unknown' in some cases, perhaps due to bug in
`pkg_resources' in Python 2.6.6.
Also update option description to state that Jinja2 version >=2.7 is
required.
Signed-off-by: Alex Tsitsimpis <alextsi@arrikto.com>
* Fix loading of filter and test plugins
Filter and test plugins are different than other plugins in that they
can have many plugins in a single file. Therefore they need to operate
a little differently. They need to have all of the potential files
returned. Then the caller takes care of passing those onto jinja2 in
order for jinja2 to make use of them.
This problem was (most recently) introduced with f921369445
This commit also restructures how we deduplicate plugins to take paths
into account. If we want to start scoping which set of modules are
loaded (due to roles, for instance) we'll need to hang on to the path
information.
* add integration test for override
* Fix style checks for bcoca code
* Implement jinja2 plugin loader as a subclass
Having a subclass allows us to customize the overriding of jinja
plugins. We can then move common parts of common code into the Loader.
* [cloud] ec2_vpc_route_table: ignore routes without DestinationCidrBlock
Add module warnings rather than silently skipping
* Permit warnings for routes tables containing vpc endpoints to be turned off
* Add tests to ensure a VPC endpoint associated with a route table does not result in a traceback
* adding possibility to specify resource group for referred virtual network
* fixed sanity issues
* removed trailing whitespace
* added test
* fixed documentation
* try to fix unstable test
* Tidied up the description of virtual_network_resource_group
* adding possibility of disabling public ip address
* fixed indent
* fixed whitespace
* fixed mistake
* try to create test with vm without public ip address
* try to fix test
* another attempt for test
* fixing test
* create vm with no ip with different name and delete it immediately
* a few additional fixes
* another attempt to pass test
* must be deleted
* simplified no ip test
* reorganised tests
* Wrapped choice in C()
* fixed issue when public ip address should not be created
* adding test for public ip address
* fixed samples
* another fix to sample formatting
* fixed test
* fix test
* fixed test
* another attempt to fix test
* maybe it works now
* still wrong
* improved check per customer request
* removed stupid semicolon
* updated test to match main scenario
* changed ip configurations to list
* another attempt
Martin Krizek