Replace bogus (but routeable) ip addresses with RFC 5737 example addresses (#40554)

* Remove 1.1.1.1 from *_config tests

* remove from *_smoke and *_system

* Miscellaneous other tests

* Remove from module documentation as well

* Remove from unit tests as well

* Remove accidental duplication from rebase

lib/ansible/modules/network/eos/eos_config.py

@@ -221,10 +221,10 @@ EXAMPLES = """
 - name: load an acl into the device
   eos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     before: no ip access-list test
     replace: block

lib/ansible/modules/network/ios/ios_config.py

@@ -241,11 +241,11 @@ EXAMPLES = """
 - name: load new acl into device
   ios_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
-      - 40 permit ip host 4.4.4.4 any log
-      - 50 permit ip host 5.5.5.5 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
+      - 40 permit ip host 192.0.2.4 any log
+      - 50 permit ip host 192.0.2.5 any log
     parents: ip access-list extended test
     before: no ip access-list extended test
     match: exact
@@ -279,12 +279,12 @@ updates:
   description: The set of commands that will be pushed to the remote device
   returned: always
   type: list
-  sample: ['hostname foo', 'router ospf 1', 'router-id 1.1.1.1']
+  sample: ['hostname foo', 'router ospf 1', 'router-id 192.0.2.1']
 commands:
   description: The set of commands that will be pushed to the remote device
   returned: always
   type: list
-  sample: ['hostname foo', 'router ospf 1', 'router-id 1.1.1.1']
+  sample: ['hostname foo', 'router ospf 1', 'router-id 192.0.2.1']
 backup_path:
   description: The full path to the backup file
   returned: when backup is yes

lib/ansible/modules/network/junos/junos_l3_interface.py

@@ -74,18 +74,18 @@ EXAMPLES = """
   junos_l3_interface:
     aggregate:
     - name: ge-0/0/1
-      ipv4: 1.1.1.1
+      ipv4: 192.0.2.1
     - name: ge-0/0/2
-      ipv4: 2.2.2.2
+      ipv4: 192.0.2.2
       ipv6: fd5d:12c9:2201:2::2
 
 - name: Delete ipv4 address using aggregate
   junos_l3_interface:
     aggregate:
     - name: ge-0/0/1
-      ipv4: 1.1.1.1
+      ipv4: 192.0.2.1
     - name: ge-0/0/2
-      ipv4: 2.2.2.2
+      ipv4: 192.0.2.2
     state: absent
 """
 
@@ -96,7 +96,7 @@ diff:
   type: string
   sample: >
         [edit interfaces ge-0/0/1 unit 0 family inet]
-        +       address 1.1.1.1/32;
+        +       address 192.0.2.1/32;
         [edit interfaces ge-0/0/1 unit 0 family inet6]
         +       address fd5d:12c9:2201:1::1/128;
 """

lib/ansible/modules/network/junos/junos_vrf.py

@@ -94,7 +94,7 @@ EXAMPLES = """
     interfaces:
       - ge-0/0/3
       - ge-0/0/2
-    rd: 1.1.1.1:10
+    rd: 192.0.2.1:10
     target: target:65514:113
     state: present
 
@@ -105,7 +105,7 @@ EXAMPLES = """
     interfaces:
       - ge-0/0/3
       - ge-0/0/2
-    rd: 1.1.1.1:10
+    rd: 192.0.2.1:10
     target: target:65514:113
     state: absent
 
@@ -116,7 +116,7 @@ EXAMPLES = """
     interfaces:
       - ge-0/0/3
       - ge-0/0/2
-    rd: 1.1.1.1:10
+    rd: 192.0.2.1:10
     target: target:65514:113
     active: False
 
@@ -127,7 +127,7 @@ EXAMPLES = """
     interfaces:
       - ge-0/0/3
       - ge-0/0/2
-    rd: 1.1.1.1:10
+    rd: 192.0.2.1:10
     target: target:65514:113
     active: True
 
@@ -139,14 +139,14 @@ EXAMPLES = """
       interfaces:
         - ge-0/0/3
          - ge-0/0/2
-      rd: 1.1.1.1:10
+      rd: 192.0.2.1:10
       target: target:65514:113
     - name: test-2
       description: test-vrf-2
       interfaces:
         - ge-0/0/4
         - ge-0/0/5
-      rd: 2.2.2.2:10
+      rd: 192.0.2.2:10
       target: target:65515:114
   state: present
 """
@@ -163,7 +163,7 @@ diff.prepared:
         +       instance-type vrf;
         +       interface ge-0/0/2.0;
         +       interface ge-0/0/3.0;
-        +       route-distinguisher 1.1.1.1:10;
+        +       route-distinguisher 192.0.2.1:10;
         +       vrf-target target:65514:113;
         +   }
 """

lib/ansible/modules/network/nxos/nxos_acl.py

@@ -158,7 +158,7 @@ EXAMPLES = '''
     seq: 10
     action: permit
     proto: tcp
-    src: 1.1.1.1/24
+    src: 192.0.2.1/24
     dest: any
     state: present
 '''
@@ -168,7 +168,7 @@ commands:
     description: commands sent to the device
     returned: always
     type: list
-    sample: ["ip access-list ANSIBLE", "10 permit tcp 1.1.1.1/24 any"]
+    sample: ["ip access-list ANSIBLE", "10 permit tcp 192.0.2.1/24 any"]
 '''
 from ansible.module_utils.network.nxos.nxos import load_config, run_commands
 from ansible.module_utils.network.nxos.nxos import nxos_argument_spec, check_args

lib/ansible/modules/network/nxos/nxos_bgp.py

@@ -220,7 +220,7 @@ EXAMPLES = '''
   nxos_bgp:
       asn: 65535
       vrf: test
-      router_id: 1.1.1.1
+      router_id: 192.0.2.1
       state: present
 '''
 
@@ -229,7 +229,7 @@ commands:
     description: commands sent to the device
     returned: always
     type: list
-    sample: ["router bgp 65535", "vrf test", "router-id 1.1.1.1"]
+    sample: ["router bgp 65535", "vrf test", "router-id 192.0.2.1"]
 '''
 
 import re

lib/ansible/modules/network/nxos/nxos_bgp_neighbor.py

@@ -151,7 +151,7 @@ EXAMPLES = '''
 # create a new neighbor
 - nxos_bgp_neighbor:
     asn: 65535
-    neighbor: 3.3.3.3
+    neighbor: 192.0.2.3
     local_as: 20
     remote_as: 30
     description: "just a description"
@@ -164,7 +164,7 @@ commands:
   description: commands sent to the device
   returned: always
   type: list
-  sample: ["router bgp 65535", "neighbor 3.3.3.3",
+  sample: ["router bgp 65535", "neighbor 192.0.2.3",
            "remote-as 30", "update-source Ethernet1/3",
            "description just a description", "local-as 20"]
 '''

lib/ansible/modules/network/nxos/nxos_bgp_neighbor_af.py

@@ -213,7 +213,7 @@ EXAMPLES = '''
 - name: configure RR client
   nxos_bgp_neighbor_af:
     asn: 65535
-    neighbor: '3.3.3.3'
+    neighbor: '192.0.2.3'
     afi: ipv4
     safi: unicast
     route_reflector_client: true
@@ -225,7 +225,7 @@ commands:
   description: commands sent to the device
   returned: always
   type: list
-  sample: ["router bgp 65535", "neighbor 3.3.3.3",
+  sample: ["router bgp 65535", "neighbor 192.0.2.3",
            "address-family ipv4 unicast", "route-reflector-client"]
 '''
 

lib/ansible/modules/network/nxos/nxos_config.py

@@ -226,21 +226,21 @@ EXAMPLES = """
 
 - nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
-      - 50 permit ip 5.5.5.5/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
+      - 50 permit ip 192.0.2.5/32 any log
     parents: ip access-list test
     before: no ip access-list test
     match: exact
 
 - nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     before: no ip access-list test
     replace: block

lib/ansible/modules/network/nxos/nxos_ntp.py

@@ -73,30 +73,30 @@ proposed:
     description: k/v pairs of parameters passed into module
     returned: always
     type: dict
-    sample: {"address": "2.2.2.2", "key_id": "48",
+    sample: {"address": "192.0.2.2", "key_id": "48",
             "peer_type": "server", "prefer": "enabled",
-            "source": "3.3.3.3", "source_type": "source"}
+            "source": "192.0.2.3", "source_type": "source"}
 existing:
     description:
         - k/v pairs of existing ntp server/peer
     returned: always
     type: dict
-    sample: {"address": "2.2.2.2", "key_id": "32",
+    sample: {"address": "192.0.2.2", "key_id": "32",
             "peer_type": "server", "prefer": "enabled",
             "source": "ethernet2/1", "source_type": "source-interface"}
 end_state:
     description: k/v pairs of ntp info after module execution
     returned: always
     type: dict
-    sample: {"address": "2.2.2.2", "key_id": "48",
+    sample: {"address": "192.0.2.2", "key_id": "48",
             "peer_type": "server", "prefer": "enabled",
-            "source": "3.3.3.3", "source_type": "source"}
+            "source": "192.0.2.3", "source_type": "source"}
 updates:
     description: command sent to the device
     returned: always
     type: list
-    sample: ["ntp server 2.2.2.2 prefer key 48",
-             "no ntp source-interface ethernet2/1", "ntp source 3.3.3.3"]
+    sample: ["ntp server 192.0.2.2 prefer key 48",
+             "no ntp source-interface ethernet2/1", "ntp source 192.0.2.3"]
 changed:
     description: check to see if a change was made on the device
     returned: always

lib/ansible/modules/network/nxos/nxos_pim_rp_address.py

@@ -74,7 +74,7 @@ commands:
     description: commands sent to the device
     returned: always
     type: list
-    sample: ["router bgp 65535", "vrf test", "router-id 1.1.1.1"]
+    sample: ["router bgp 65535", "vrf test", "router-id 192.0.2.1"]
 '''
 
 

lib/ansible/modules/network/nxos/nxos_snmp_host.py

@@ -88,7 +88,7 @@ options:
 EXAMPLES = '''
 # ensure snmp host is configured
 - nxos_snmp_host:
-    snmp_host: 3.3.3.3
+    snmp_host: 192.0.2.3
     community: TESTING
     state: present
 '''
@@ -98,7 +98,7 @@ commands:
     description: commands sent to the device
     returned: always
     type: list
-    sample: ["snmp-server host 3.3.3.3 filter-vrf another_test_vrf"]
+    sample: ["snmp-server host 192.0.2.3 filter-vrf another_test_vrf"]
 '''
 
 

lib/ansible/modules/network/nxos/nxos_static_route.py

@@ -74,7 +74,7 @@ options:
 EXAMPLES = '''
 - nxos_static_route:
     prefix: "192.168.20.64/24"
-    next_hop: "3.3.3.3"
+    next_hop: "192.0.2.3"
     route_name: testing
     pref: 100
 '''
@@ -84,7 +84,7 @@ commands:
     description: commands sent to the device
     returned: always
     type: list
-    sample: ["ip route 192.168.20.0/24 3.3.3.3 name testing 100"]
+    sample: ["ip route 192.168.20.0/24 192.0.2.3 name testing 100"]
 '''
 import re
 from copy import deepcopy

lib/ansible/modules/network/system/net_logging.py

@@ -65,7 +65,7 @@ EXAMPLES = """
 - name: configure host logging
   net_logging:
     dest: host
-    name: 1.1.1.1
+    name: 192.0.2.1
     facility: kernel
     level: critical
 

test/integration/targets/asa_config/tests/cli/more_system.yaml

@@ -4,21 +4,21 @@
 - name: setup
   asa_config:
     lines:
-      - "clear configure tunnel-group 1.1.1.1"
+      - "clear configure tunnel-group 192.0.2.1"
     provider: "{{ cli }}"
   ignore_errors: yes
 
 
 - name: Prepare tunnel-group
   asa_config:
-    before: tunnel-group 1.1.1.1 type ipsec-l2l
+    before: tunnel-group 192.0.2.1 type ipsec-l2l
     lines:
-      - "tunnel-group 1.1.1.1 ipsec-attributes"
+      - "tunnel-group 192.0.2.1 ipsec-attributes"
     provider: "{{ cli }}"
 
 - name: Setup tunnel-group
   asa_config:
-    parents: tunnel-group 1.1.1.1 ipsec-attributes
+    parents: tunnel-group 192.0.2.1 ipsec-attributes
     lines:
       - "ikev1 pre-shared-key abc123"
     passwords: yes
@@ -26,7 +26,7 @@
 
 - name: Test idempotency
   asa_config:
-    parents: tunnel-group 1.1.1.1 ipsec-attributes
+    parents: tunnel-group 192.0.2.1 ipsec-attributes
     lines:
       - "ikev1 pre-shared-key abc123"
     passwords: yes
@@ -40,7 +40,7 @@
 - name: teardown
   asa_config:
     lines:
-      - "clear configure tunnel-group 1.1.1.1"
+      - "clear configure tunnel-group 192.0.2.1"
     provider: "{{ cli }}"
 
 

test/integration/targets/dellos10_config/tests/cli/sublevel_block.yaml

@@ -4,9 +4,9 @@
 - name: setup
   dellos10_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any count byte
-      - seq 10 permit ip host 2.2.2.2 any count byte
-      - seq 15 permit ip host 3.3.3.3 any count byte 
+      - seq 5 permit ip host 192.0.2.1 any count byte
+      - seq 10 permit ip host 192.0.2.2 any count byte
+      - seq 15 permit ip host 192.0.2.3 any count byte
     parents: ['ip access-list test']
     before: ['no ip access-list test']
     after: ['exit']
@@ -16,10 +16,10 @@
 - name: configure sub level command using block resplace
   dellos10_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any count byte
-      - seq 10 permit ip host 2.2.2.2 any count byte
-      - seq 15 permit ip host 3.3.3.3 any count byte 
-      - seq 20 permit ip host 4.4.4.4 any count byte
+      - seq 5 permit ip host 192.0.2.1 any count byte
+      - seq 10 permit ip host 192.0.2.2 any count byte
+      - seq 15 permit ip host 192.0.2.3 any count byte
+      - seq 20 permit ip host 192.0.2.4 any count byte
     parents: ['ip access-list test']
     replace: block
     after: ['exit']
@@ -30,18 +30,18 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'seq 5 permit ip host 1.1.1.1 any count byte' in result.updates"
-      - "'seq 10 permit ip host 2.2.2.2 any count byte' in result.updates"
-      - "'seq 15 permit ip host 3.3.3.3 any count byte' in result.updates"
-      - "'seq 20 permit ip host 4.4.4.4 any count byte' in result.updates"
+      - "'seq 5 permit ip host 192.0.2.1 any count byte' in result.updates"
+      - "'seq 10 permit ip host 192.0.2.2 any count byte' in result.updates"
+      - "'seq 15 permit ip host 192.0.2.3 any count byte' in result.updates"
+      - "'seq 20 permit ip host 192.0.2.4 any count byte' in result.updates"
 
 - name: check sub level command using block replace
   dellos10_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any count byte
-      - seq 10 permit ip host 2.2.2.2 any count byte
-      - seq 15 permit ip host 3.3.3.3 any count byte 
-      - seq 20 permit ip host 4.4.4.4 any count byte
+      - seq 5 permit ip host 192.0.2.1 any count byte
+      - seq 10 permit ip host 192.0.2.2 any count byte
+      - seq 15 permit ip host 192.0.2.3 any count byte
+      - seq 20 permit ip host 192.0.2.4 any count byte
     parents: ['ip access-list test']
     replace: block
     after: ['exit']

test/integration/targets/dellos10_config/tests/cli/sublevel_exact.yaml

@@ -4,11 +4,11 @@
 - name: setup
   dellos10_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any count byte
-      - seq 10 permit ip host 2.2.2.2 any count byte
-      - seq 15 permit ip host 3.3.3.3 any count byte 
-      - seq 20 permit ip host 4.4.4.4 any count byte
-      - seq 25 permit ip host 5.5.5.5 any count byte
+      - seq 5 permit ip host 192.0.2.1 any count byte
+      - seq 10 permit ip host 192.0.2.2 any count byte
+      - seq 15 permit ip host 192.0.2.3 any count byte
+      - seq 20 permit ip host 192.0.2.4 any count byte
+      - seq 25 permit ip host 192.0.2.5 any count byte
     parents: ['ip access-list test']
     before: ['no ip access-list test']
     after: ['exit']
@@ -18,10 +18,10 @@
 - name: configure sub level command using exact match
   dellos10_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any count byte
-      - seq 10 permit ip host 2.2.2.2 any count byte
-      - seq 15 permit ip host 3.3.3.3 any count byte 
-      - seq 20 permit ip host 4.4.4.4 any count byte
+      - seq 5 permit ip host 192.0.2.1 any count byte
+      - seq 10 permit ip host 192.0.2.2 any count byte
+      - seq 15 permit ip host 192.0.2.3 any count byte
+      - seq 20 permit ip host 192.0.2.4 any count byte
     parents: ['ip access-list test']
     after: ['exit']
     match: exact
@@ -32,20 +32,20 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'seq 5 permit ip host 1.1.1.1 any count byte' in result.updates"
-      - "'seq 10 permit ip host 2.2.2.2 any count byte' in result.updates"
-      - "'seq 15 permit ip host 3.3.3.3 any count byte' in result.updates"
-      - "'seq 20 permit ip host 4.4.4.4 any count byte' in result.updates"
-      - "'seq 25 permit ip host 5.5.5.5 any count byte' not in result.updates"
+      - "'seq 5 permit ip host 192.0.2.1 any count byte' in result.updates"
+      - "'seq 10 permit ip host 192.0.2.2 any count byte' in result.updates"
+      - "'seq 15 permit ip host 192.0.2.3 any count byte' in result.updates"
+      - "'seq 20 permit ip host 192.0.2.4 any count byte' in result.updates"
+      - "'seq 25 permit ip host 192.0.2.5 any count byte' not in result.updates"
 
 - name: check sub level command using exact match
   dellos10_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any count byte
-      - seq 10 permit ip host 2.2.2.2 any count byte
-      - seq 15 permit ip host 3.3.3.3 any count byte 
-      - seq 20 permit ip host 4.4.4.4 any count byte
-      - seq 25 permit ip host 5.5.5.5 any count byte
+      - seq 5 permit ip host 192.0.2.1 any count byte
+      - seq 10 permit ip host 192.0.2.2 any count byte
+      - seq 15 permit ip host 192.0.2.3 any count byte
+      - seq 20 permit ip host 192.0.2.4 any count byte
+      - seq 25 permit ip host 192.0.2.5 any count byte
     parents: ['ip access-list test']
     after: ['exit']
     match: exact

test/integration/targets/dellos10_config/tests/cli/sublevel_strict.yaml

@@ -4,11 +4,11 @@
 - name: setup
   dellos10_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any count byte
-      - seq 10 permit ip host 2.2.2.2 any count byte
-      - seq 15 permit ip host 3.3.3.3 any count byte 
-      - seq 20 permit ip host 4.4.4.4 any count byte
-      - seq 25 permit ip host 5.5.5.5 any count byte
+      - seq 5 permit ip host 192.0.2.1 any count byte
+      - seq 10 permit ip host 192.0.2.2 any count byte
+      - seq 15 permit ip host 192.0.2.3 any count byte
+      - seq 20 permit ip host 192.0.2.4 any count byte
+      - seq 25 permit ip host 192.0.2.5 any count byte
     parents: ['ip access-list test']
     before: ['no ip access-list test']
     after: ['exit']
@@ -18,10 +18,10 @@
 - name: configure sub level command using strict match
   dellos10_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any count byte
-      - seq 10 permit ip host 2.2.2.2 any count byte
-      - seq 15 permit ip host 3.3.3.3 any count byte 
-      - seq 20 permit ip host 4.4.4.4 any count byte
+      - seq 5 permit ip host 192.0.2.1 any count byte
+      - seq 10 permit ip host 192.0.2.2 any count byte
+      - seq 15 permit ip host 192.0.2.3 any count byte
+      - seq 20 permit ip host 192.0.2.4 any count byte
     parents: ['ip access-list test']
     match: strict
     provider: "{{ cli }}"
@@ -34,9 +34,9 @@
 - name: check sub level command using strict match
   dellos10_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any count byte
-      - seq 15 permit ip host 3.3.3.3 any count byte 
-      - seq 10 permit ip host 2.2.2.2 any count byte
+      - seq 5 permit ip host 192.0.2.1 any count byte
+      - seq 15 permit ip host 192.0.2.3 any count byte
+      - seq 10 permit ip host 192.0.2.2 any count byte
     parents: ['ip access-list test']
     after: ['exit']
     match: strict
@@ -47,11 +47,11 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'seq 5 permit ip host 1.1.1.1 any count byte' not in result.updates"
-      - "'seq 10 permit ip host 2.2.2.2 any count byte' in result.updates"
-      - "'seq 15 permit ip host 3.3.3.3 any count byte' in result.updates"
-      - "'seq 20 permit ip host 4.4.4.4 any count byte' not in result.updates"
-      - "'seq 25 permit ip host 5.5.5.5 any count byte' not in result.updates"
+      - "'seq 5 permit ip host 192.0.2.1 any count byte' not in result.updates"
+      - "'seq 10 permit ip host 192.0.2.2 any count byte' in result.updates"
+      - "'seq 15 permit ip host 192.0.2.3 any count byte' in result.updates"
+      - "'seq 20 permit ip host 192.0.2.4 any count byte' not in result.updates"
+      - "'seq 25 permit ip host 192.0.2.5 any count byte' not in result.updates"
 
 - name: teardown
   dellos10_config:

test/integration/targets/dellos6_config/tests/cli/sublevel_block.yaml

@@ -4,9 +4,9 @@
 - name: setup
   dellos6_config:
     lines:
-      - permit ip 1.1.1.1 0.0.0.0 any log
-      - permit ip 2.2.2.2 0.0.0.0 any log
-      - permit ip 3.3.3.3 0.0.0.0 any log
+      - permit ip 192.0.2.1 0.0.0.0 any log
+      - permit ip 192.0.2.2 0.0.0.0 any log
+      - permit ip 192.0.2.3 0.0.0.0 any log
     parents: ['ip access-list test']
     before: ['no ip access-list test']
     after: ['exit']
@@ -16,10 +16,10 @@
 - name: configure sub level command using block resplace
   dellos6_config:
     lines:
-      - 1000 permit ip 1.1.1.1 0.0.0.0 any log
-      - 1010 permit ip 2.2.2.2 0.0.0.0 any log
-      - 1020 permit ip 3.3.3.3 0.0.0.0 any log
-      - 1030 permit ip 4.4.4.4 0.0.0.0 any log
+      - 1000 permit ip 192.0.2.1 0.0.0.0 any log
+      - 1010 permit ip 192.0.2.2 0.0.0.0 any log
+      - 1020 permit ip 192.0.2.3 0.0.0.0 any log
+      - 1030 permit ip 192.0.2.4 0.0.0.0 any log
     parents: ['ip access-list test']
     replace: block
     after: ['exit']
@@ -30,18 +30,18 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'1000 permit ip 1.1.1.1 0.0.0.0 any log' in result.updates"
-      - "'1010 permit ip 2.2.2.2 0.0.0.0 any log' in result.updates"
-      - "'1020 permit ip 3.3.3.3 0.0.0.0 any log' in result.updates"
-      - "'1030 permit ip 4.4.4.4 0.0.0.0 any log' in result.updates"
+      - "'1000 permit ip 192.0.2.1 0.0.0.0 any log' in result.updates"
+      - "'1010 permit ip 192.0.2.2 0.0.0.0 any log' in result.updates"
+      - "'1020 permit ip 192.0.2.3 0.0.0.0 any log' in result.updates"
+      - "'1030 permit ip 192.0.2.4 0.0.0.0 any log' in result.updates"
 
 - name: check sub level command using block replace
   dellos6_config:
     lines:
-      - 1000 permit ip 1.1.1.1 0.0.0.0 any log
-      - 1010 permit ip 2.2.2.2 0.0.0.0 any log
-      - 1020 permit ip 3.3.3.3 0.0.0.0 any log
-      - 1030 permit ip 4.4.4.4 0.0.0.0 any log
+      - 1000 permit ip 192.0.2.1 0.0.0.0 any log
+      - 1010 permit ip 192.0.2.2 0.0.0.0 any log
+      - 1020 permit ip 192.0.2.3 0.0.0.0 any log
+      - 1030 permit ip 192.0.2.4 0.0.0.0 any log
     parents: ['ip access-list test']
     replace: block
     after: ['exit']

test/integration/targets/dellos6_config/tests/cli/sublevel_exact.yaml

@@ -4,11 +4,11 @@
 - name: setup
   dellos6_config:
     lines:
-      - permit ip 1.1.1.1 0.0.0.0 any log
-      - permit ip 2.2.2.2 0.0.0.0 any log
-      - permit ip 3.3.3.3 0.0.0.0 any log
-      - permit ip 4.4.4.4 0.0.0.0 any log
-      - permit ip 5.5.5.5 0.0.0.0 any log
+      - permit ip 192.0.2.1 0.0.0.0 any log
+      - permit ip 192.0.2.2 0.0.0.0 any log
+      - permit ip 192.0.2.3 0.0.0.0 any log
+      - permit ip 192.0.2.4 0.0.0.0 any log
+      - permit ip 192.0.2.5 0.0.0.0 any log
     parents: ['ip access-list test']
     before: ['no ip access-list test']
     after: ['exit']
@@ -18,10 +18,10 @@
 - name: configure sub level command using exact match
   dellos6_config:
     lines:
-      - 1000 permit ip 1.1.1.1 0.0.0.0 any log
-      - 1010 permit ip 2.2.2.2 0.0.0.0 any log
-      - 1020 permit ip 3.3.3.3 0.0.0.0 any log
-      - 1030 permit ip 4.4.4.4 0.0.0.0 any log
+      - 1000 permit ip 192.0.2.1 0.0.0.0 any log
+      - 1010 permit ip 192.0.2.2 0.0.0.0 any log
+      - 1020 permit ip 192.0.2.3 0.0.0.0 any log
+      - 1030 permit ip 192.0.2.4 0.0.0.0 any log
     parents: ['ip access-list test']
     after: ['exit']
     match: exact
@@ -32,20 +32,20 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'1000 permit ip 1.1.1.1 0.0.0.0 any log' in result.updates"
-      - "'1010 permit ip 2.2.2.2 0.0.0.0 any log' in result.updates"
-      - "'1020 permit ip 3.3.3.3 0.0.0.0 any log' in result.updates"
-      - "'1030 permit ip 4.4.4.4 0.0.0.0 any log' in result.updates"
-      - "'1040 permit ip 5.5.5.5 0.0.0.0 any log' not in result.updates"
+      - "'1000 permit ip 192.0.2.1 0.0.0.0 any log' in result.updates"
+      - "'1010 permit ip 192.0.2.2 0.0.0.0 any log' in result.updates"
+      - "'1020 permit ip 192.0.2.3 0.0.0.0 any log' in result.updates"
+      - "'1030 permit ip 192.0.2.4 0.0.0.0 any log' in result.updates"
+      - "'1040 permit ip 192.0.2.5 0.0.0.0 any log' not in result.updates"
 
 - name: check sub level command using exact match
   dellos6_config:
     lines:
-      - 1000 permit ip 1.1.1.1 0.0.0.0 any log
-      - 1010 permit ip 2.2.2.2 0.0.0.0 any log
-      - 1020 permit ip 3.3.3.3 0.0.0.0 any log
-      - 1030 permit ip 4.4.4.4 0.0.0.0 any log
-      - 1040 permit ip 5.5.5.5 0.0.0.0 any log
+      - 1000 permit ip 192.0.2.1 0.0.0.0 any log
+      - 1010 permit ip 192.0.2.2 0.0.0.0 any log
+      - 1020 permit ip 192.0.2.3 0.0.0.0 any log
+      - 1030 permit ip 192.0.2.4 0.0.0.0 any log
+      - 1040 permit ip 192.0.2.5 0.0.0.0 any log
     parents: ['ip access-list test']
     after: ['exit']
     match: exact

test/integration/targets/dellos6_config/tests/cli/sublevel_strict.yaml

@@ -4,11 +4,11 @@
 - name: setup
   dellos6_config:
     lines:
-      - permit ip 1.1.1.1 0.0.0.0 any log
-      - permit ip 2.2.2.2 0.0.0.0 any log
-      - permit ip 3.3.3.3 0.0.0.0 any log
-      - permit ip 4.4.4.4 0.0.0.0 any log
-      - permit ip 5.5.5.5 0.0.0.0 any log
+      - permit ip 192.0.2.1 0.0.0.0 any log
+      - permit ip 192.0.2.2 0.0.0.0 any log
+      - permit ip 192.0.2.3 0.0.0.0 any log
+      - permit ip 192.0.2.4 0.0.0.0 any log
+      - permit ip 192.0.2.5 0.0.0.0 any log
     parents: ['ip access-list test']
     before: ['no ip access-list test']
     after: ['exit']
@@ -18,10 +18,10 @@
 - name: configure sub level command using strict match
   dellos6_config:
     lines:
-      - 1000 permit ip 1.1.1.1 0.0.0.0 any log
-      - 1010 permit ip 2.2.2.2 0.0.0.0 any log
-      - 1020 permit ip 3.3.3.3 0.0.0.0 any log
-      - 1030 permit ip 4.4.4.4 0.0.0.0 any log
+      - 1000 permit ip 192.0.2.1 0.0.0.0 any log
+      - 1010 permit ip 192.0.2.2 0.0.0.0 any log
+      - 1020 permit ip 192.0.2.3 0.0.0.0 any log
+      - 1030 permit ip 192.0.2.4 0.0.0.0 any log
     parents: ['ip access-list test']
     match: strict
     provider: "{{ cli }}"
@@ -34,9 +34,9 @@
 - name: check sub level command using strict match
   dellos6_config:
     lines:
-      - 1000 permit ip 1.1.1.1 0.0.0.0 any log
-      - 1010 permit ip 3.3.3.3 0.0.0.0 any log
-      - 1020 permit ip 2.2.2.2 0.0.0.0 any log
+      - 1000 permit ip 192.0.2.1 0.0.0.0 any log
+      - 1010 permit ip 192.0.2.3 0.0.0.0 any log
+      - 1020 permit ip 192.0.2.2 0.0.0.0 any log
     parents: ['ip access-list test']
     after: ['exit']
     match: strict
@@ -47,11 +47,11 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'1000 permit ip 1.1.1.1 0.0.0.0 any log' not in result.updates"
-      - "'1020 permit ip 2.2.2.2 0.0.0.0 any log' in result.updates"
-      - "'1010 permit ip 3.3.3.3 0.0.0.0 any log' in result.updates"
-      - "'1030 permit ip 4.4.4.4 0.0.0.0 any log' not in result.updates"
-      - "'1040 permit ip 5.5.5.5 0.0.0.0 any log' not in result.updates"
+      - "'1000 permit ip 192.0.2.1 0.0.0.0 any log' not in result.updates"
+      - "'1020 permit ip 192.0.2.2 0.0.0.0 any log' in result.updates"
+      - "'1010 permit ip 192.0.2.3 0.0.0.0 any log' in result.updates"
+      - "'1030 permit ip 192.0.2.4 0.0.0.0 any log' not in result.updates"
+      - "'1040 permit ip 192.0.2.5 0.0.0.0 any log' not in result.updates"
 
 - name: teardown
   dellos6_config:

test/integration/targets/dellos9_config/tests/cli/sublevel_block.yaml

@@ -4,9 +4,9 @@
 - name: setup
   dellos9_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
-      - seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
-      - seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
+      - seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
+      - seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
+      - seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
     parents: ['ip access-list extended test']
     before: ['no ip access-list extended test']
     after: ['exit']
@@ -16,10 +16,10 @@
 - name: configure sub level command using block replace
   dellos9_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
-      - seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
-      - seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
-      - seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
+      - seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
+      - seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
+      - seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
+      - seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
     parents: ['ip access-list extended test']
     replace: block
     after: ['exit']
@@ -30,18 +30,18 @@
     that:
       - "result.changed == true"
       - "'ip access-list extended test' in result.updates"
-      - "'seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5' in result.updates"
-      - "'seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5' in result.updates"
-      - "'seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5' in result.updates"
-      - "'seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5' in result.updates"
+      - "'seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5' in result.updates"
+      - "'seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5' in result.updates"
+      - "'seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5' in result.updates"
+      - "'seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5' in result.updates"
 
 - name: check sub level command using block replace
   dellos9_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
-      - seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
-      - seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
-      - seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
+      - seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
+      - seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
+      - seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
+      - seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
     parents: ['ip access-list extended test']
     replace: block
     after: ['exit']

test/integration/targets/dellos9_config/tests/cli/sublevel_exact.yaml

@@ -4,11 +4,11 @@
 - name: setup
   dellos9_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
-      - seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
-      - seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
-      - seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
-      - seq 25 permit ip host 5.5.5.5 any log threshold-in-msgs 10 interval 5
+      - seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
+      - seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
+      - seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
+      - seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
+      - seq 25 permit ip host 192.0.2.5 any log threshold-in-msgs 10 interval 5
     parents: ['ip access-list extended test']
     before: ['no ip access-list extended test']
     after: ['exit']
@@ -18,10 +18,10 @@
 - name: configure sub level command using exact match
   dellos9_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
-      - seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
-      - seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
-      - seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
+      - seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
+      - seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
+      - seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
+      - seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
     parents: ['ip access-list extended test']
     after: ['exit']
     match: exact
@@ -32,20 +32,20 @@
     that:
       - "result.changed == true"
       - "'ip access-list extended test' in result.updates"
-      - "'seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5' in result.updates"
-      - "'seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5' in result.updates"
-      - "'seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5' in result.updates"
-      - "'seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5' in result.updates"
-      - "'seq 25 permit ip host 5.5.5.5 any log threshold-in-msgs 10 interval 5' not in result.updates"
+      - "'seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5' in result.updates"
+      - "'seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5' in result.updates"
+      - "'seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5' in result.updates"
+      - "'seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5' in result.updates"
+      - "'seq 25 permit ip host 192.0.2.5 any log threshold-in-msgs 10 interval 5' not in result.updates"
 
 - name: check sub level command using exact match
   dellos9_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
-      - seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
-      - seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
-      - seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
-      - seq 25 permit ip host 5.5.5.5 any log threshold-in-msgs 10 interval 5
+      - seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
+      - seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
+      - seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
+      - seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
+      - seq 25 permit ip host 192.0.2.5 any log threshold-in-msgs 10 interval 5
     parents: ['ip access-list extended test']
     after: ['exit']
     match: exact

test/integration/targets/dellos9_config/tests/cli/sublevel_strict.yaml

@@ -4,11 +4,11 @@
 - name: setup
   dellos9_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
-      - seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
-      - seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
-      - seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
-      - seq 25 permit ip host 5.5.5.5 any log threshold-in-msgs 10 interval 5
+      - seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
+      - seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
+      - seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
+      - seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
+      - seq 25 permit ip host 192.0.2.5 any log threshold-in-msgs 10 interval 5
     parents: ['ip access-list extended test']
     before: ['no ip access-list extended test']
     after: ['exit']
@@ -18,10 +18,10 @@
 - name: configure sub level command using strict match
   dellos9_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
-      - seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
-      - seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
-      - seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
+      - seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
+      - seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
+      - seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
+      - seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
     parents: ['ip access-list extended test']
     match: strict
     provider: "{{ cli }}"
@@ -34,9 +34,9 @@
 - name: check sub level command using strict match
   dellos9_config:
     lines:
-      - seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
-      - seq 10 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
-      - seq 15 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
+      - seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
+      - seq 10 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
+      - seq 15 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
     parents: ['ip access-list extended test']
     after: ['exit']
     match: strict
@@ -47,11 +47,11 @@
     that:
       - "result.changed == true"
       - "'ip access-list extended test' in result.updates"
-      - "'seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5' not in result.updates"
-      - "'seq 15 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5' in result.updates"
-      - "'seq 10 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5' in result.updates"
-      - "'seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5' not in result.updates"
-      - "'seq 25 permit ip host 5.5.5.5 any log threshold-in-msgs 10 interval 5' not in result.updates"
+      - "'seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5' not in result.updates"
+      - "'seq 15 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5' in result.updates"
+      - "'seq 10 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5' in result.updates"
+      - "'seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5' not in result.updates"
+      - "'seq 25 permit ip host 192.0.2.5 any log threshold-in-msgs 10 interval 5' not in result.updates"
 
 - name: teardown
   dellos9_config:

test/integration/targets/eos_config/tests/cli/sublevel_block.yaml

@@ -4,9 +4,9 @@
 - name: setup
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
     parents: ip access-list test
     before: no ip access-list test
     after: exit
@@ -16,10 +16,10 @@
 - name: configure sub level command using block resplace
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
-      - 40 permit ip host 4.4.4.4 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
+      - 40 permit ip host 192.0.2.4 any log
     parents: ip access-list test
     replace: block
     after: exit
@@ -30,18 +30,18 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'10 permit ip host 1.1.1.1 any log' in result.updates"
-      - "'20 permit ip host 2.2.2.2 any log' in result.updates"
-      - "'30 permit ip host 3.3.3.3 any log' in result.updates"
-      - "'40 permit ip host 4.4.4.4 any log' in result.updates"
+      - "'10 permit ip host 192.0.2.1 any log' in result.updates"
+      - "'20 permit ip host 192.0.2.2 any log' in result.updates"
+      - "'30 permit ip host 192.0.2.3 any log' in result.updates"
+      - "'40 permit ip host 192.0.2.4 any log' in result.updates"
 
 - name: check sub level command using block replace
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
-      - 40 permit ip host 4.4.4.4 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
+      - 40 permit ip host 192.0.2.4 any log
     parents: ip access-list test
     replace: block
     after: exit

test/integration/targets/eos_config/tests/cli/sublevel_exact.yaml

@@ -4,11 +4,11 @@
 - name: setup
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
-      - 40 permit ip host 4.4.4.4 any log
-      - 50 permit ip host 5.5.5.5 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
+      - 40 permit ip host 192.0.2.4 any log
+      - 50 permit ip host 192.0.2.5 any log
     parents: ip access-list test
     before: no ip access-list test
     after: exit
@@ -18,10 +18,10 @@
 - name: configure sub level command using exact match
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
-      - 40 permit ip host 4.4.4.4 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
+      - 40 permit ip host 192.0.2.4 any log
     parents: ip access-list test
     before: no ip access-list test
     after: exit
@@ -34,19 +34,19 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'10 permit ip host 1.1.1.1 any log' in result.updates"
-      - "'20 permit ip host 2.2.2.2 any log' in result.updates"
-      - "'30 permit ip host 3.3.3.3 any log' in result.updates"
-      - "'40 permit ip host 4.4.4.4 any log' in result.updates"
-      - "'50 permit ip host 5.5.5.5 any log' not in result.updates"
+      - "'10 permit ip host 192.0.2.1 any log' in result.updates"
+      - "'20 permit ip host 192.0.2.2 any log' in result.updates"
+      - "'30 permit ip host 192.0.2.3 any log' in result.updates"
+      - "'40 permit ip host 192.0.2.4 any log' in result.updates"
+      - "'50 permit ip host 192.0.2.5 any log' not in result.updates"
 
 - name: check sub level command using exact match
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
-      - 40 permit ip host 4.4.4.4 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
+      - 40 permit ip host 192.0.2.4 any log
     parents: ip access-list test
     match: exact
   become: yes

test/integration/targets/eos_config/tests/cli/sublevel_strict.yaml

@@ -4,11 +4,11 @@
 - name: setup
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
-      - 40 permit ip host 4.4.4.4 any log
-      - 50 permit ip host 5.5.5.5 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
+      - 40 permit ip host 192.0.2.4 any log
+      - 50 permit ip host 192.0.2.5 any log
     parents: ip access-list test
     before: no ip access-list test
     after: exit
@@ -18,10 +18,10 @@
 - name: configure sub level command using strict match
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 3.3.3.3 any log
-      - 30 permit ip host 2.2.2.2 any log
-      - 40 permit ip host 4.4.4.4 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.3 any log
+      - 30 permit ip host 192.0.2.2 any log
+      - 40 permit ip host 192.0.2.4 any log
     parents: ip access-list test
     before: no ip access-list test
     after: exit
@@ -34,19 +34,19 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'10 permit ip host 1.1.1.1 any log' in result.updates"
-      - "'30 permit ip host 2.2.2.2 any log' in result.updates"
-      - "'20 permit ip host 3.3.3.3 any log' in result.updates"
-      - "'40 permit ip host 4.4.4.4 any log' in result.updates"
-      - "'50 permit ip host 5.5.5.5 any log' not in result.updates"
+      - "'10 permit ip host 192.0.2.1 any log' in result.updates"
+      - "'30 permit ip host 192.0.2.2 any log' in result.updates"
+      - "'20 permit ip host 192.0.2.3 any log' in result.updates"
+      - "'40 permit ip host 192.0.2.4 any log' in result.updates"
+      - "'50 permit ip host 192.0.2.5 any log' not in result.updates"
 
 - name: check sub level command using strict match
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 3.3.3.3 any log
-      - 30 permit ip host 2.2.2.2 any log
-      - 40 permit ip host 4.4.4.4 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.3 any log
+      - 30 permit ip host 192.0.2.2 any log
+      - 40 permit ip host 192.0.2.4 any log
     parents: ip access-list test
     match: strict
   become: yes

test/integration/targets/eos_config/tests/eapi/sublevel_block.yaml

@@ -4,9 +4,9 @@
 - name: setup
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
     parents: ip access-list test
     before: no ip access-list test
     match: none
@@ -15,10 +15,10 @@
 - name: configure sub level command using block resplace
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
-      - 40 permit ip host 4.4.4.4 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
+      - 40 permit ip host 192.0.2.4 any log
     parents: ip access-list test
     after: end
     replace: block
@@ -29,18 +29,18 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'10 permit ip host 1.1.1.1 any log' in result.updates"
-      - "'20 permit ip host 2.2.2.2 any log' in result.updates"
-      - "'30 permit ip host 3.3.3.3 any log' in result.updates"
-      - "'40 permit ip host 4.4.4.4 any log' in result.updates"
+      - "'10 permit ip host 192.0.2.1 any log' in result.updates"
+      - "'20 permit ip host 192.0.2.2 any log' in result.updates"
+      - "'30 permit ip host 192.0.2.3 any log' in result.updates"
+      - "'40 permit ip host 192.0.2.4 any log' in result.updates"
 
 - name: check sub level command using block replace
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
-      - 40 permit ip host 4.4.4.4 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
+      - 40 permit ip host 192.0.2.4 any log
     parents: ip access-list test
     replace: block
   become: yes

test/integration/targets/eos_config/tests/eapi/sublevel_exact.yaml

@@ -4,11 +4,11 @@
 - name: setup
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
-      - 40 permit ip host 4.4.4.4 any log
-      - 50 permit ip host 5.5.5.5 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
+      - 40 permit ip host 192.0.2.4 any log
+      - 50 permit ip host 192.0.2.5 any log
     parents: ip access-list test
     before: no ip access-list test
     after: exit
@@ -18,10 +18,10 @@
 - name: configure sub level command using exact match
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
-      - 40 permit ip host 4.4.4.4 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
+      - 40 permit ip host 192.0.2.4 any log
     parents: ip access-list test
     before: no ip access-list test
     after: exit
@@ -33,19 +33,19 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'10 permit ip host 1.1.1.1 any log' in result.updates"
-      - "'20 permit ip host 2.2.2.2 any log' in result.updates"
-      - "'30 permit ip host 3.3.3.3 any log' in result.updates"
-      - "'40 permit ip host 4.4.4.4 any log' in result.updates"
-      - "'50 permit ip host 5.5.5.5 any log' not in result.updates"
+      - "'10 permit ip host 192.0.2.1 any log' in result.updates"
+      - "'20 permit ip host 192.0.2.2 any log' in result.updates"
+      - "'30 permit ip host 192.0.2.3 any log' in result.updates"
+      - "'40 permit ip host 192.0.2.4 any log' in result.updates"
+      - "'50 permit ip host 192.0.2.5 any log' not in result.updates"
 
 - name: check sub level command using exact match
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
-      - 40 permit ip host 4.4.4.4 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
+      - 40 permit ip host 192.0.2.4 any log
     before: no ip access-list test
     parents: ip access-list test
     match: exact

test/integration/targets/eos_config/tests/eapi/sublevel_strict.yaml

@@ -4,11 +4,11 @@
 - name: setup
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 2.2.2.2 any log
-      - 30 permit ip host 3.3.3.3 any log
-      - 40 permit ip host 4.4.4.4 any log
-      - 50 permit ip host 5.5.5.5 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.2 any log
+      - 30 permit ip host 192.0.2.3 any log
+      - 40 permit ip host 192.0.2.4 any log
+      - 50 permit ip host 192.0.2.5 any log
     parents: ip access-list test
     before: no ip access-list test
     match: none
@@ -17,10 +17,10 @@
 - name: configure sub level command using strict match
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 3.3.3.3 any log
-      - 30 permit ip host 2.2.2.2 any log
-      - 40 permit ip host 4.4.4.4 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.3 any log
+      - 30 permit ip host 192.0.2.2 any log
+      - 40 permit ip host 192.0.2.4 any log
     parents: ip access-list test
     before: no ip access-list test
     after: exit
@@ -33,19 +33,19 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'10 permit ip host 1.1.1.1 any log' in result.updates"
-      - "'30 permit ip host 2.2.2.2 any log' in result.updates"
-      - "'20 permit ip host 3.3.3.3 any log' in result.updates"
-      - "'40 permit ip host 4.4.4.4 any log' in result.updates"
-      - "'50 permit ip host 5.5.5.5 any log' not in result.updates"
+      - "'10 permit ip host 192.0.2.1 any log' in result.updates"
+      - "'30 permit ip host 192.0.2.2 any log' in result.updates"
+      - "'20 permit ip host 192.0.2.3 any log' in result.updates"
+      - "'40 permit ip host 192.0.2.4 any log' in result.updates"
+      - "'50 permit ip host 192.0.2.5 any log' not in result.updates"
 
 - name: check sub level command using strict match
   eos_config:
     lines:
-      - 10 permit ip host 1.1.1.1 any log
-      - 20 permit ip host 3.3.3.3 any log
-      - 30 permit ip host 2.2.2.2 any log
-      - 40 permit ip host 4.4.4.4 any log
+      - 10 permit ip host 192.0.2.1 any log
+      - 20 permit ip host 192.0.2.3 any log
+      - 30 permit ip host 192.0.2.2 any log
+      - 40 permit ip host 192.0.2.4 any log
     parents: ip access-list test
     match: strict
   become: yes

test/integration/targets/eos_smoke/tests/cli/common_config.yaml

@@ -49,9 +49,9 @@
     - name: setup
       eos_config:
         lines:
-          - 10 permit ip host 1.1.1.1 any log
-          - 20 permit ip host 2.2.2.2 any log
-          - 30 permit ip host 3.3.3.3 any log
+          - 10 permit ip host 192.0.2.1 any log
+          - 20 permit ip host 192.0.2.2 any log
+          - 30 permit ip host 192.0.2.3 any log
         parents: ip access-list test
         before: no ip access-list test
         after: exit
@@ -62,10 +62,10 @@
     - name: configure sub level command using block replace
       eos_config:
         lines:
-          - 10 permit ip host 1.1.1.1 any log
-          - 20 permit ip host 2.2.2.2 any log
-          - 30 permit ip host 3.3.3.3 any log
-          - 40 permit ip host 4.4.4.4 any log
+          - 10 permit ip host 192.0.2.1 any log
+          - 20 permit ip host 192.0.2.2 any log
+          - 30 permit ip host 192.0.2.3 any log
+          - 40 permit ip host 192.0.2.4 any log
         parents: ip access-list test
         replace: block
         after: exit
@@ -78,18 +78,18 @@
         that:
           - "result.changed == true"
           - "'ip access-list test' in result.updates"
-          - "'10 permit ip host 1.1.1.1 any log' in result.updates"
-          - "'20 permit ip host 2.2.2.2 any log' in result.updates"
-          - "'30 permit ip host 3.3.3.3 any log' in result.updates"
-          - "'40 permit ip host 4.4.4.4 any log' in result.updates"
+          - "'10 permit ip host 192.0.2.1 any log' in result.updates"
+          - "'20 permit ip host 192.0.2.2 any log' in result.updates"
+          - "'30 permit ip host 192.0.2.3 any log' in result.updates"
+          - "'40 permit ip host 192.0.2.4 any log' in result.updates"
 
     - name: check sub level command using block replace
       eos_config:
         lines:
-          - 10 permit ip host 1.1.1.1 any log
-          - 20 permit ip host 2.2.2.2 any log
-          - 30 permit ip host 3.3.3.3 any log
-          - 40 permit ip host 4.4.4.4 any log
+          - 10 permit ip host 192.0.2.1 any log
+          - 20 permit ip host 192.0.2.2 any log
+          - 30 permit ip host 192.0.2.3 any log
+          - 40 permit ip host 192.0.2.4 any log
         parents: ip access-list test
         replace: block
         after: exit

test/integration/targets/eos_smoke/tests/eapi/common_config.yaml

@@ -49,9 +49,9 @@
     - name: setup
       eos_config:
         lines:
-          - 10 permit ip host 1.1.1.1 any log
-          - 20 permit ip host 2.2.2.2 any log
-          - 30 permit ip host 3.3.3.3 any log
+          - 10 permit ip host 192.0.2.1 any log
+          - 20 permit ip host 192.0.2.2 any log
+          - 30 permit ip host 192.0.2.3 any log
         parents: ip access-list test
         before: no ip access-list test
         after: exit
@@ -62,10 +62,10 @@
     - name: configure sub level command using block replace
       eos_config:
         lines:
-          - 10 permit ip host 1.1.1.1 any log
-          - 20 permit ip host 2.2.2.2 any log
-          - 30 permit ip host 3.3.3.3 any log
-          - 40 permit ip host 4.4.4.4 any log
+          - 10 permit ip host 192.0.2.1 any log
+          - 20 permit ip host 192.0.2.2 any log
+          - 30 permit ip host 192.0.2.3 any log
+          - 40 permit ip host 192.0.2.4 any log
         parents: ip access-list test
         replace: block
         after: exit
@@ -78,18 +78,18 @@
         that:
           - "result.changed == true"
           - "'ip access-list test' in result.updates"
-          - "'10 permit ip host 1.1.1.1 any log' in result.updates"
-          - "'20 permit ip host 2.2.2.2 any log' in result.updates"
-          - "'30 permit ip host 3.3.3.3 any log' in result.updates"
-          - "'40 permit ip host 4.4.4.4 any log' in result.updates"
+          - "'10 permit ip host 192.0.2.1 any log' in result.updates"
+          - "'20 permit ip host 192.0.2.2 any log' in result.updates"
+          - "'30 permit ip host 192.0.2.3 any log' in result.updates"
+          - "'40 permit ip host 192.0.2.4 any log' in result.updates"
 
     - name: check sub level command using block replace
       eos_config:
         lines:
-          - 10 permit ip host 1.1.1.1 any log
-          - 20 permit ip host 2.2.2.2 any log
-          - 30 permit ip host 3.3.3.3 any log
-          - 40 permit ip host 4.4.4.4 any log
+          - 10 permit ip host 192.0.2.1 any log
+          - 20 permit ip host 192.0.2.2 any log
+          - 30 permit ip host 192.0.2.3 any log
+          - 40 permit ip host 192.0.2.4 any log
         parents: ip access-list test
         replace: block
         after: exit

test/integration/targets/eos_system/tests/cli/set_name_servers.yaml

@@ -12,9 +12,9 @@
 - name: configure name_servers
   eos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
   become: yes
   register: result
 
@@ -22,16 +22,16 @@
     that:
       - result.changed == true
       - result.commands|length == 3
-      - "'ip name-server 1.1.1.1' in result.commands"
-      - "'ip name-server 2.2.2.2' in result.commands"
-      - "'ip name-server 3.3.3.3' in result.commands"
+      - "'ip name-server 192.0.2.1' in result.commands"
+      - "'ip name-server 192.0.2.2' in result.commands"
+      - "'ip name-server 192.0.2.3' in result.commands"
 
 - name: verify name_servers
   eos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
   become: yes
   register: result
 
@@ -42,9 +42,9 @@
 #- name: change to vrf
 #  eos_system:
 #    name_servers:
-#      - 1.1.1.1
-#      - { server: 2.2.2.2, vrf: ansible }
-#      - 3.3.3.3
+#      - 192.0.2.1
+#      - { server: 192.0.2.2, vrf: ansible }
+#      - 192.0.2.3
 #  become: yes
 #  register: result
 
@@ -52,15 +52,15 @@
 #    that:
 #      - result.changed == true
 #      - result.commands|length == 2
-#      - "'no ip name-server 2.2.2.2' in result.commands"
-#      - "'ip name-server 2.2.2.2 vrf ansible' in result.commands"
+#      - "'no ip name-server 192.0.2.2' in result.commands"
+#      - "'ip name-server 192.0.2.2 vrf ansible' in result.commands"
 
 #- name: verify change to vrf
 #  eos_system:
 #    name_servers:
-#      - 1.1.1.1
-#      - { server: 2.2.2.2, vrf: ansible }
-#      - 3.3.3.3
+#      - 192.0.2.1
+#      - { server: 192.0.2.2, vrf: ansible }
+#      - 192.0.2.3
 #  become: yes
 #  register: result
 #
@@ -71,8 +71,8 @@
 - name: remove one
   eos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
+      - 192.0.2.1
+      - 192.0.2.2
   become: yes
   register: result
 
@@ -80,7 +80,7 @@
     that:
       - result.changed == true
       - result.commands|length == 1
-      - "'no ip name-server 3.3.3.3' in result.commands"
+      - "'no ip name-server 192.0.2.3' in result.commands"
 
 - name: teardown
   eos_config:

test/integration/targets/eos_system/tests/eapi/set_name_servers.yaml

@@ -12,9 +12,9 @@
 - name: configure name_servers
   eos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
   become: yes
   register: result
 
@@ -22,16 +22,16 @@
     that:
       - result.changed == true
       - result.commands|length == 3
-      - "'ip name-server 1.1.1.1' in result.commands"
-      - "'ip name-server 2.2.2.2' in result.commands"
-      - "'ip name-server 3.3.3.3' in result.commands"
+      - "'ip name-server 192.0.2.1' in result.commands"
+      - "'ip name-server 192.0.2.2' in result.commands"
+      - "'ip name-server 192.0.2.3' in result.commands"
 
 - name: verify name_servers
   eos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
   become: yes
   register: result
 
@@ -42,9 +42,9 @@
 #- name: change to vrf
 #  eos_system:
 #    name_servers:
-#      - 1.1.1.1
-#      - { server: 2.2.2.2, vrf: ansible }
-#      - 3.3.3.3
+#      - 192.0.2.1
+#      - { server: 192.0.2.2, vrf: ansible }
+#      - 192.0.2.3
 #  become: yes
 #  register: result
 
@@ -52,15 +52,15 @@
 #    that:
 #      - result.changed == true
 #      - result.commands|length == 2
-#      - "'no ip name-server 2.2.2.2' in result.commands"
-#      - "'ip name-server 2.2.2.2 vrf ansible' in result.commands"
+#      - "'no ip name-server 192.0.2.2' in result.commands"
+#      - "'ip name-server 192.0.2.2 vrf ansible' in result.commands"
 
 #- name: verify change to vrf
 #  eos_system:
 #    name_servers:
-#      - 1.1.1.1
-#      - { server: 2.2.2.2, vrf: ansible }
-#      - 3.3.3.3
+#      - 192.0.2.1
+#      - { server: 192.0.2.2, vrf: ansible }
+#      - 192.0.2.3
 #  become: yes
 #  register: result
 #
@@ -71,8 +71,8 @@
 - name: remove one
   eos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
+      - 192.0.2.1
+      - 192.0.2.2
   become: yes
   register: result
 
@@ -80,7 +80,7 @@
     that:
       - result.changed == true
       - result.commands|length == 1
-      - "'no ip name-server 3.3.3.3' in result.commands"
+      - "'no ip name-server 192.0.2.3' in result.commands"
 
 - name: teardown
   eos_config:

test/integration/targets/ios_config/tests/cli/sublevel_block.yaml

@@ -4,9 +4,9 @@
 - name: setup
   ios_config:
     lines:
-      - permit ip host 1.1.1.1 any log
-      - permit ip host 2.2.2.2 any log
-      - permit ip host 3.3.3.3 any log
+      - permit ip host 192.0.2.1 any log
+      - permit ip host 192.0.2.2 any log
+      - permit ip host 192.0.2.3 any log
     parents: ['ip access-list extended test']
     before: ['no ip access-list extended test']
     after: ['exit']
@@ -16,10 +16,10 @@
 - name: configure sub level command using block resplace
   ios_config:
     lines:
-      - permit ip host 1.1.1.1 any log
-      - permit ip host 2.2.2.2 any log
-      - permit ip host 3.3.3.3 any log
-      - permit ip host 4.4.4.4 any log
+      - permit ip host 192.0.2.1 any log
+      - permit ip host 192.0.2.2 any log
+      - permit ip host 192.0.2.3 any log
+      - permit ip host 192.0.2.4 any log
     parents: ['ip access-list extended test']
     replace: block
     after: ['exit']
@@ -30,18 +30,18 @@
     that:
       - "result.changed == true"
       - "'ip access-list extended test' in result.updates"
-      - "'permit ip host 1.1.1.1 any log' in result.updates"
-      - "'permit ip host 2.2.2.2 any log' in result.updates"
-      - "'permit ip host 3.3.3.3 any log' in result.updates"
-      - "'permit ip host 4.4.4.4 any log' in result.updates"
+      - "'permit ip host 192.0.2.1 any log' in result.updates"
+      - "'permit ip host 192.0.2.2 any log' in result.updates"
+      - "'permit ip host 192.0.2.3 any log' in result.updates"
+      - "'permit ip host 192.0.2.4 any log' in result.updates"
 
 - name: check sub level command using block replace
   ios_config:
     lines:
-      - permit ip host 1.1.1.1 any log
-      - permit ip host 2.2.2.2 any log
-      - permit ip host 3.3.3.3 any log
-      - permit ip host 4.4.4.4 any log
+      - permit ip host 192.0.2.1 any log
+      - permit ip host 192.0.2.2 any log
+      - permit ip host 192.0.2.3 any log
+      - permit ip host 192.0.2.4 any log
     parents: ['ip access-list extended test']
     replace: block
     after: ['exit']

test/integration/targets/ios_config/tests/cli/sublevel_exact.yaml

@@ -4,11 +4,11 @@
 - name: setup
   ios_config:
     lines:
-      - permit ip host 1.1.1.1 any log
-      - permit ip host 2.2.2.2 any log
-      - permit ip host 3.3.3.3 any log
-      - permit ip host 4.4.4.4 any log
-      - permit ip host 5.5.5.5 any log
+      - permit ip host 192.0.2.1 any log
+      - permit ip host 192.0.2.2 any log
+      - permit ip host 192.0.2.3 any log
+      - permit ip host 192.0.2.4 any log
+      - permit ip host 192.0.2.5 any log
     parents: ip access-list extended test
     before: no ip access-list extended test
     after: exit
@@ -18,10 +18,10 @@
 - name: configure sub level command using exact match
   ios_config:
     lines:
-      - permit ip host 1.1.1.1 any log
-      - permit ip host 2.2.2.2 any log
-      - permit ip host 3.3.3.3 any log
-      - permit ip host 4.4.4.4 any log
+      - permit ip host 192.0.2.1 any log
+      - permit ip host 192.0.2.2 any log
+      - permit ip host 192.0.2.3 any log
+      - permit ip host 192.0.2.4 any log
     parents: ip access-list extended test
     before: no ip access-list extended test
     after: exit
@@ -33,19 +33,19 @@
     that:
       - "result.changed == true"
       - "'ip access-list extended test' in result.updates"
-      - "'permit ip host 1.1.1.1 any log' in result.updates"
-      - "'permit ip host 2.2.2.2 any log' in result.updates"
-      - "'permit ip host 3.3.3.3 any log' in result.updates"
-      - "'permit ip host 4.4.4.4 any log' in result.updates"
-      - "'permit ip host 5.5.5.5 any log' not in result.updates"
+      - "'permit ip host 192.0.2.1 any log' in result.updates"
+      - "'permit ip host 192.0.2.2 any log' in result.updates"
+      - "'permit ip host 192.0.2.3 any log' in result.updates"
+      - "'permit ip host 192.0.2.4 any log' in result.updates"
+      - "'permit ip host 192.0.2.5 any log' not in result.updates"
 
 - name: check sub level command using exact match
   ios_config:
     lines:
-      - permit ip host 1.1.1.1 any log
-      - permit ip host 2.2.2.2 any log
-      - permit ip host 3.3.3.3 any log
-      - permit ip host 4.4.4.4 any log
+      - permit ip host 192.0.2.1 any log
+      - permit ip host 192.0.2.2 any log
+      - permit ip host 192.0.2.3 any log
+      - permit ip host 192.0.2.4 any log
     parents: ip access-list extended test
     match: exact
     provider: "{{ cli }}"

test/integration/targets/ios_config/tests/cli/sublevel_strict.yaml

@@ -4,11 +4,11 @@
 - name: setup
   ios_config:
     lines:
-      - permit ip host 1.1.1.1 any log
-      - permit ip host 2.2.2.2 any log
-      - permit ip host 3.3.3.3 any log
-      - permit ip host 4.4.4.4 any log
-      - permit ip host 5.5.5.5 any log
+      - permit ip host 192.0.2.1 any log
+      - permit ip host 192.0.2.2 any log
+      - permit ip host 192.0.2.3 any log
+      - permit ip host 192.0.2.4 any log
+      - permit ip host 192.0.2.5 any log
     parents: ip access-list extended test
     before: no ip access-list extended test
     match: none
@@ -17,10 +17,10 @@
 - name: configure sub level command using strict match
   ios_config:
     lines:
-      - permit ip host 1.1.1.1 any log
-      - permit ip host 2.2.2.2 any log
-      - permit ip host 3.3.3.3 any log
-      - permit ip host 4.4.4.4 any log
+      - permit ip host 192.0.2.1 any log
+      - permit ip host 192.0.2.2 any log
+      - permit ip host 192.0.2.3 any log
+      - permit ip host 192.0.2.4 any log
     parents: ip access-list extended test
     match: strict
     provider: "{{ cli }}"
@@ -33,9 +33,9 @@
 - name: check sub level command using strict match
   ios_config:
     lines:
-      - permit ip host 1.1.1.1 any log
-      - permit ip host 3.3.3.3 any log
-      - permit ip host 2.2.2.2 any log
+      - permit ip host 192.0.2.1 any log
+      - permit ip host 192.0.2.3 any log
+      - permit ip host 192.0.2.2 any log
     parents: ip access-list extended test
     after: exit
     match: strict
@@ -46,11 +46,11 @@
     that:
       - "result.changed == true"
       - "'ip access-list extended test' in result.updates"
-      - "'permit ip host 1.1.1.1 any log' not in result.updates"
-      - "'permit ip host 2.2.2.2 any log' in result.updates"
-      - "'permit ip host 3.3.3.3 any log' in result.updates"
-      - "'permit ip host 4.4.4.4 any log' not in result.updates"
-      - "'permit ip host 5.5.5.5 any log' not in result.updates"
+      - "'permit ip host 192.0.2.1 any log' not in result.updates"
+      - "'permit ip host 192.0.2.2 any log' in result.updates"
+      - "'permit ip host 192.0.2.3 any log' in result.updates"
+      - "'permit ip host 192.0.2.4 any log' not in result.updates"
+      - "'permit ip host 192.0.2.5 any log' not in result.updates"
 
 - name: teardown
   ios_config:

test/integration/targets/ios_smoke/tests/cli/common_config.yaml

@@ -42,9 +42,9 @@
 - name: setup test NetworkConfig.difference, replace=block
   ios_config:
     lines:
-      - permit ip host 1.1.1.1 any log
-      - permit ip host 2.2.2.2 any log
-      - permit ip host 3.3.3.3 any log
+      - permit ip host 192.0.2.1 any log
+      - permit ip host 192.0.2.2 any log
+      - permit ip host 192.0.2.3 any log
     parents: ['ip access-list extended test']
     before: ['no ip access-list extended test']
     after: ['exit']
@@ -54,10 +54,10 @@
 - name: test NetworkConfig.difference, replace=block
   ios_config:
     lines:
-      - permit ip host 1.1.1.1 any log
-      - permit ip host 2.2.2.2 any log
-      - permit ip host 3.3.3.3 any log
-      - permit ip host 4.4.4.4 any log
+      - permit ip host 192.0.2.1 any log
+      - permit ip host 192.0.2.2 any log
+      - permit ip host 192.0.2.3 any log
+      - permit ip host 192.0.2.4 any log
     parents: ['ip access-list extended test']
     replace: block
     after: ['exit']
@@ -68,10 +68,10 @@
     that:
       - "result.changed == true"
       - "'ip access-list extended test' in result.updates"
-      - "'permit ip host 1.1.1.1 any log' in result.updates"
-      - "'permit ip host 2.2.2.2 any log' in result.updates"
-      - "'permit ip host 3.3.3.3 any log' in result.updates"
-      - "'permit ip host 4.4.4.4 any log' in result.updates"
+      - "'permit ip host 192.0.2.1 any log' in result.updates"
+      - "'permit ip host 192.0.2.2 any log' in result.updates"
+      - "'permit ip host 192.0.2.3 any log' in result.updates"
+      - "'permit ip host 192.0.2.4 any log' in result.updates"
 
 - name: teardown- NetworkConfig.difference, replace=block
   ios_config:

test/integration/targets/ios_system/tests/cli/set_name_servers.yaml

@@ -11,9 +11,9 @@
 - name: configure name_servers
   ios_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
     provider: "{{ cli }}"
   register: result
 
@@ -21,16 +21,16 @@
     that:
       - result.changed == true
       - result.commands|length == 3
-      - "'ip name-server 1.1.1.1' in result.commands"
-      - "'ip name-server 2.2.2.2' in result.commands"
-      - "'ip name-server 3.3.3.3' in result.commands"
+      - "'ip name-server 192.0.2.1' in result.commands"
+      - "'ip name-server 192.0.2.2' in result.commands"
+      - "'ip name-server 192.0.2.3' in result.commands"
 
 - name: verify name_servers
   ios_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
     provider: "{{ cli }}"
   register: result
 
@@ -41,9 +41,9 @@
 #- name: change to vrf
 #  ios_system:
 #    name_servers:
-#      - 1.1.1.1
-#      - { server: 2.2.2.2, vrf: ansible }
-#      - 3.3.3.3
+#      - 192.0.2.1
+#      - { server: 192.0.2.2, vrf: ansible }
+#      - 192.0.2.3
 #    provider: "{{ cli }}"
 #  register: result
 
@@ -51,15 +51,15 @@
 #    that:
 #      - result.changed == true
 #      - result.commands|length == 2
-#      - "'no ip name-server 2.2.2.2' in result.commands"
-#      - "'ip name-server 2.2.2.2 vrf ansible' in result.commands"
+#      - "'no ip name-server 192.0.2.2' in result.commands"
+#      - "'ip name-server 192.0.2.2 vrf ansible' in result.commands"
 
 #- name: verify change to vrf
 #  ios_system:
 #    name_servers:
-#      - 1.1.1.1
-#      - { server: 2.2.2.2, vrf: ansible }
-#      - 3.3.3.3
+#      - 192.0.2.1
+#      - { server: 192.0.2.2, vrf: ansible }
+#      - 192.0.2.3
 #    provider: "{{ cli }}"
 #  register: result
 #
@@ -70,8 +70,8 @@
 - name: remove one
   ios_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
+      - 192.0.2.1
+      - 192.0.2.2
     provider: "{{ cli }}"
   register: result
 
@@ -79,7 +79,7 @@
     that:
       - result.changed == true
       - result.commands|length == 1
-      - "'no ip name-server 3.3.3.3' in result.commands"
+      - "'no ip name-server 192.0.2.3' in result.commands"
 
 - name: teardown
   ios_config:

test/integration/targets/iosxr_config/tests/cli/sublevel_block.yaml

@@ -4,9 +4,9 @@
 - name: setup
   iosxr_config:
     commands:
-      - 10 permit ipv4 host 1.1.1.1 any log
-      - 20 permit ipv4 host 2.2.2.2 any log
-      - 30 permit ipv4 host 3.3.3.3 any log
+      - 10 permit ipv4 host 192.0.2.1 any log
+      - 20 permit ipv4 host 192.0.2.2 any log
+      - 30 permit ipv4 host 192.0.2.3 any log
     parents: ['ipv4 access-list test']
     before: ['no ipv4 access-list test']
     match: none
@@ -14,10 +14,10 @@
 - name: configure sub level command using block resplace
   iosxr_config:
     commands:
-      - 10 permit ipv4 host 1.1.1.1 any log
-      - 20 permit ipv4 host 2.2.2.2 any log
-      - 30 permit ipv4 host 3.3.3.3 any log
-      - 40 permit ipv4 host 4.4.4.4 any log
+      - 10 permit ipv4 host 192.0.2.1 any log
+      - 20 permit ipv4 host 192.0.2.2 any log
+      - 30 permit ipv4 host 192.0.2.3 any log
+      - 40 permit ipv4 host 192.0.2.4 any log
     parents: ['ipv4 access-list test']
     replace: block
   register: result
@@ -26,18 +26,18 @@
     that:
       - "result.changed == true"
       - "'ipv4 access-list test' in result.commands"
-      - "'10 permit ipv4 host 1.1.1.1 any log' in result.commands"
-      - "'20 permit ipv4 host 2.2.2.2 any log' in result.commands"
-      - "'30 permit ipv4 host 3.3.3.3 any log' in result.commands"
-      - "'40 permit ipv4 host 4.4.4.4 any log' in result.commands"
+      - "'10 permit ipv4 host 192.0.2.1 any log' in result.commands"
+      - "'20 permit ipv4 host 192.0.2.2 any log' in result.commands"
+      - "'30 permit ipv4 host 192.0.2.3 any log' in result.commands"
+      - "'40 permit ipv4 host 192.0.2.4 any log' in result.commands"
 
 - name: check sub level command using block replace
   iosxr_config:
     commands:
-      - 10 permit ipv4 host 1.1.1.1 any log
-      - 20 permit ipv4 host 2.2.2.2 any log
-      - 30 permit ipv4 host 3.3.3.3 any log
-      - 40 permit ipv4 host 4.4.4.4 any log
+      - 10 permit ipv4 host 192.0.2.1 any log
+      - 20 permit ipv4 host 192.0.2.2 any log
+      - 30 permit ipv4 host 192.0.2.3 any log
+      - 40 permit ipv4 host 192.0.2.4 any log
     parents: ['ipv4 access-list test']
     replace: block
   register: result

test/integration/targets/iosxr_config/tests/cli/sublevel_exact.yaml

@@ -4,11 +4,11 @@
 - name: setup
   iosxr_config:
     commands:
-      - 10 permit ipv4 host 1.1.1.1 any log
-      - 20 permit ipv4 host 2.2.2.2 any log
-      - 30 permit ipv4 host 3.3.3.3 any log
-      - 40 permit ipv4 host 4.4.4.4 any log
-      - 50 permit ipv4 host 5.5.5.5 any log
+      - 10 permit ipv4 host 192.0.2.1 any log
+      - 20 permit ipv4 host 192.0.2.2 any log
+      - 30 permit ipv4 host 192.0.2.3 any log
+      - 40 permit ipv4 host 192.0.2.4 any log
+      - 50 permit ipv4 host 192.0.2.5 any log
     parents: ['ipv4 access-list test']
     before: ['no ipv4 access-list test']
     match: none
@@ -16,10 +16,10 @@
 - name: configure sub level command using exact match
   iosxr_config:
     commands:
-      - 10 permit ipv4 host 1.1.1.1 any log
-      - 20 permit ipv4 host 2.2.2.2 any log
-      - 30 permit ipv4 host 3.3.3.3 any log
-      - 40 permit ipv4 host 4.4.4.4 any log
+      - 10 permit ipv4 host 192.0.2.1 any log
+      - 20 permit ipv4 host 192.0.2.2 any log
+      - 30 permit ipv4 host 192.0.2.3 any log
+      - 40 permit ipv4 host 192.0.2.4 any log
     parents: ['ipv4 access-list test']
     match: exact
   register: result
@@ -28,20 +28,20 @@
     that:
       - "result.changed == true"
       - "'ipv4 access-list test' in result.commands"
-      - "'10 permit ipv4 host 1.1.1.1 any log' in result.commands"
-      - "'20 permit ipv4 host 2.2.2.2 any log' in result.commands"
-      - "'30 permit ipv4 host 3.3.3.3 any log' in result.commands"
-      - "'40 permit ipv4 host 4.4.4.4 any log' in result.commands"
-      - "'50 permit ipv4 host 5.5.5.5 any log' not in result.commands"
+      - "'10 permit ipv4 host 192.0.2.1 any log' in result.commands"
+      - "'20 permit ipv4 host 192.0.2.2 any log' in result.commands"
+      - "'30 permit ipv4 host 192.0.2.3 any log' in result.commands"
+      - "'40 permit ipv4 host 192.0.2.4 any log' in result.commands"
+      - "'50 permit ipv4 host 192.0.2.5 any log' not in result.commands"
 
 - name: check sub level command using exact match
   iosxr_config:
     commands:
-      - 10 permit ipv4 host 1.1.1.1 any log
-      - 20 permit ipv4 host 2.2.2.2 any log
-      - 30 permit ipv4 host 3.3.3.3 any log
-      - 40 permit ipv4 host 4.4.4.4 any log
-      - 50 permit ipv4 host 5.5.5.5 any log
+      - 10 permit ipv4 host 192.0.2.1 any log
+      - 20 permit ipv4 host 192.0.2.2 any log
+      - 30 permit ipv4 host 192.0.2.3 any log
+      - 40 permit ipv4 host 192.0.2.4 any log
+      - 50 permit ipv4 host 192.0.2.5 any log
     parents: ['ipv4 access-list test']
     match: exact
   register: result

test/integration/targets/iosxr_config/tests/cli/sublevel_strict.yaml

@@ -4,11 +4,11 @@
 - name: setup
   iosxr_config:
     commands:
-      - 10 permit ipv4 host 1.1.1.1 any log
-      - 20 permit ipv4 host 3.3.3.3 any log
-      - 30 permit ipv4 host 2.2.2.2 any log
-      - 40 permit ipv4 host 4.4.4.4 any log
-      - 50 permit ipv4 host 5.5.5.5 any log
+      - 10 permit ipv4 host 192.0.2.1 any log
+      - 20 permit ipv4 host 192.0.2.3 any log
+      - 30 permit ipv4 host 192.0.2.2 any log
+      - 40 permit ipv4 host 192.0.2.4 any log
+      - 50 permit ipv4 host 192.0.2.5 any log
     parents: ['ipv4 access-list test']
     before: ['no ipv4 access-list test']
     match: none
@@ -16,10 +16,10 @@
 - name: configure sub level command using strict match
   iosxr_config:
     commands:
-      - 10 permit ipv4 host 1.1.1.1 any log
-      - 20 permit ipv4 host 2.2.2.2 any log
-      - 30 permit ipv4 host 3.3.3.3 any log
-      - 40 permit ipv4 host 4.4.4.4 any log
+      - 10 permit ipv4 host 192.0.2.1 any log
+      - 20 permit ipv4 host 192.0.2.2 any log
+      - 30 permit ipv4 host 192.0.2.3 any log
+      - 40 permit ipv4 host 192.0.2.4 any log
     parents: ['ipv4 access-list test']
     before: ['no ipv4 access-list test']
     match: strict
@@ -30,19 +30,19 @@
     that:
       - "result.changed == true"
       - "'ipv4 access-list test' in result.commands"
-      - "'10 permit ipv4 host 1.1.1.1 any log' in result.commands"
-      - "'20 permit ipv4 host 2.2.2.2 any log' in result.commands"
-      - "'30 permit ipv4 host 3.3.3.3 any log' in result.commands"
-      - "'40 permit ipv4 host 4.4.4.4 any log' in result.commands"
-      - "'50 permit ipv4 host 5.5.5.5 any log' not in result.commands"
+      - "'10 permit ipv4 host 192.0.2.1 any log' in result.commands"
+      - "'20 permit ipv4 host 192.0.2.2 any log' in result.commands"
+      - "'30 permit ipv4 host 192.0.2.3 any log' in result.commands"
+      - "'40 permit ipv4 host 192.0.2.4 any log' in result.commands"
+      - "'50 permit ipv4 host 192.0.2.5 any log' not in result.commands"
 
 - name: check sub level command using strict match
   iosxr_config:
     commands:
-      - 10 permit ipv4 host 1.1.1.1 any log
-      - 20 permit ipv4 host 2.2.2.2 any log
-      - 30 permit ipv4 host 3.3.3.3 any log
-      - 40 permit ipv4 host 4.4.4.4 any log
+      - 10 permit ipv4 host 192.0.2.1 any log
+      - 20 permit ipv4 host 192.0.2.2 any log
+      - 30 permit ipv4 host 192.0.2.3 any log
+      - 40 permit ipv4 host 192.0.2.4 any log
     parents: ['ipv4 access-list test']
     match: strict
   register: result

test/integration/targets/iosxr_smoke/tests/cli/common_config.yaml

@@ -5,9 +5,9 @@
 - name: setup
   iosxr_config:
     commands:
-      - 10 permit ipv4 host 1.1.1.1 any log
-      - 20 permit ipv4 host 2.2.2.2 any log
-      - 30 permit ipv4 host 3.3.3.3 any log
+      - 10 permit ipv4 host 192.0.2.1 any log
+      - 20 permit ipv4 host 192.0.2.2 any log
+      - 30 permit ipv4 host 192.0.2.3 any log
     parents: ['ipv4 access-list test']
     before: ['no ipv4 access-list test']
     match: none
@@ -15,10 +15,10 @@
 - name: configure sub level command using block resplace
   iosxr_config:
     commands:
-      - 10 permit ipv4 host 1.1.1.1 any log
-      - 20 permit ipv4 host 2.2.2.2 any log
-      - 30 permit ipv4 host 3.3.3.3 any log
-      - 40 permit ipv4 host 4.4.4.4 any log
+      - 10 permit ipv4 host 192.0.2.1 any log
+      - 20 permit ipv4 host 192.0.2.2 any log
+      - 30 permit ipv4 host 192.0.2.3 any log
+      - 40 permit ipv4 host 192.0.2.4 any log
     parents: ['ipv4 access-list test']
     replace: block
   register: result
@@ -27,18 +27,18 @@
     that:
       - "result.changed == true"
       - "'ipv4 access-list test' in result.commands"
-      - "'10 permit ipv4 host 1.1.1.1 any log' in result.commands"
-      - "'20 permit ipv4 host 2.2.2.2 any log' in result.commands"
-      - "'30 permit ipv4 host 3.3.3.3 any log' in result.commands"
-      - "'40 permit ipv4 host 4.4.4.4 any log' in result.commands"
+      - "'10 permit ipv4 host 192.0.2.1 any log' in result.commands"
+      - "'20 permit ipv4 host 192.0.2.2 any log' in result.commands"
+      - "'30 permit ipv4 host 192.0.2.3 any log' in result.commands"
+      - "'40 permit ipv4 host 192.0.2.4 any log' in result.commands"
 
 - name: check sub level command using block replace
   iosxr_config:
     commands:
-      - 10 permit ipv4 host 1.1.1.1 any log
-      - 20 permit ipv4 host 2.2.2.2 any log
-      - 30 permit ipv4 host 3.3.3.3 any log
-      - 40 permit ipv4 host 4.4.4.4 any log
+      - 10 permit ipv4 host 192.0.2.1 any log
+      - 20 permit ipv4 host 192.0.2.2 any log
+      - 30 permit ipv4 host 192.0.2.3 any log
+      - 40 permit ipv4 host 192.0.2.4 any log
     parents: ['ipv4 access-list test']
     replace: block
   register: result

test/integration/targets/iosxr_system/tests/cli/set_name_servers.yaml

@@ -4,18 +4,18 @@
 - name: setup
   iosxr_config:
     lines:
-      - no ip name-server 1.1.1.1
-      - no ip name-server 2.2.2.2
-      - no ip name-server 3.3.3.3
+      - no ip name-server 192.0.2.1
+      - no ip name-server 192.0.2.2
+      - no ip name-server 192.0.2.3
     match: none
     provider: "{{ cli }}"
 
 - name: configure name_servers
   iosxr_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
     provider: "{{ cli }}"
   register: result
 
@@ -23,16 +23,16 @@
     that:
       - result.changed == true
       - result.commands|length == 3
-      - "'domain name-server 1.1.1.1' in result.commands"
-      - "'domain name-server 2.2.2.2' in result.commands"
-      - "'domain name-server 3.3.3.3' in result.commands"
+      - "'domain name-server 192.0.2.1' in result.commands"
+      - "'domain name-server 192.0.2.2' in result.commands"
+      - "'domain name-server 192.0.2.3' in result.commands"
 
 - name: verify name_servers
   iosxr_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
     provider: "{{ cli }}"
   register: result
 
@@ -43,8 +43,8 @@
 - name: remove one
   iosxr_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
+      - 192.0.2.1
+      - 192.0.2.2
     provider: "{{ cli }}"
   register: result
 
@@ -52,13 +52,13 @@
     that:
       - result.changed == true
       - result.commands|length == 1
-      - "'no domain name-server 3.3.3.3' in result.commands"
+      - "'no domain name-server 192.0.2.3' in result.commands"
 
 - name: setup
   iosxr_config:
     lines:
-      - no ip name-server 1.1.1.1
-      - no ip name-server 2.2.2.2
+      - no ip name-server 192.0.2.1
+      - no ip name-server 192.0.2.2
     match: none
     provider: "{{ cli }}"
 

test/integration/targets/iosxr_system/tests/netconf/set_name_servers.yaml

@@ -5,9 +5,9 @@
 - name: setup
   iosxr_config:
     lines:
-      - no domain name-server 1.1.1.1
-      - no domain name-server 2.2.2.2
-      - no domain name-server 3.3.3.3
+      - no domain name-server 192.0.2.1
+      - no domain name-server 192.0.2.2
+      - no domain name-server 192.0.2.3
     match: none
     provider: "{{ cli }}"
   connection: network_cli
@@ -16,9 +16,9 @@
   iosxr_system:
     vrf: ansible
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
     provider: "{{ netconf }}"
     state: absent
   connection: netconf
@@ -28,9 +28,9 @@
 - name: configure name_servers
   iosxr_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
     provider: "{{ netconf }}"
   connection: netconf
   register: result
@@ -39,16 +39,16 @@
     that:
       - result.changed == true
       - result.xml|length == 1
-      - "'1.1.1.1' in result.xml[0]"
-      - "'2.2.2.2' in result.xml[0]"
-      - "'3.3.3.3' in result.xml[0]"
+      - "'192.0.2.1' in result.xml[0]"
+      - "'192.0.2.2' in result.xml[0]"
+      - "'192.0.2.3' in result.xml[0]"
 
 - name: verify name_servers
   iosxr_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
     provider: "{{ netconf }}"
   connection: netconf
   register: result
@@ -61,9 +61,9 @@
   iosxr_system: &addvrf
     vrf: ansible
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
     provider: "{{ netconf }}"
   connection: netconf
   register: result
@@ -73,9 +73,9 @@
       - result.changed == true
       - result.xml|length == 1
       - "'ansible' in result.xml[0]"
-      - "'1.1.1.1' in result.xml[0]"
-      - "'2.2.2.2' in result.xml[0]"
-      - "'3.3.3.3' in result.xml[0]"
+      - "'192.0.2.1' in result.xml[0]"
+      - "'192.0.2.2' in result.xml[0]"
+      - "'192.0.2.3' in result.xml[0]"
 
 - name: verify change to vrf
   iosxr_system: *addvrf
@@ -89,8 +89,8 @@
 - name: remove one
   iosxr_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
+      - 192.0.2.1
+      - 192.0.2.2
     provider: "{{ netconf }}"
   connection: netconf
   register: result
@@ -99,14 +99,14 @@
     that:
       - result.changed == true
       - result.xml|length == 1
-      - "'3.3.3.3' in result.xml[0]"
+      - "'192.0.2.3' in result.xml[0]"
 
 - name: remove one with vrf
   iosxr_system:
     vrf: ansible
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
+      - 192.0.2.1
+      - 192.0.2.2
     provider: "{{ netconf }}"
   connection: netconf
   ignore_errors: True
@@ -115,8 +115,8 @@
 - name: teardown
   iosxr_config:
     lines:
-      - no domain name-server 1.1.1.1
-      - no domain name-server 2.2.2.2
+      - no domain name-server 192.0.2.1
+      - no domain name-server 192.0.2.2
     match: none
     provider: "{{ cli }}"
   connection: network_cli
@@ -125,8 +125,8 @@
   iosxr_system:
     vrf: ansible
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
+      - 192.0.2.1
+      - 192.0.2.2
     provider: "{{ netconf }}"
     state: absent
   connection: netconf

test/integration/targets/junos_config/tests/netconf/multiple.yaml

@@ -13,7 +13,7 @@
   junos_config:
     lines:
       - 'set system host-name {{ inventory_hostname_short }}'
-      - 'set interfaces lo0 unit 0 family inet address 1.1.1.1/32'
+      - 'set interfaces lo0 unit 0 family inet address 192.0.2.1/32'
     provider: "{{ netconf }}"
   register: result
 
@@ -23,13 +23,13 @@
       # Ensure host-name *hasn't* been updated
       - "'host-name;' not in result.diff.prepared"
       # Ensure interface has *been* updated
-      - "'address 1.1.1.1/32' in result.diff.prepared"
+      - "'address 192.0.2.1/32' in result.diff.prepared"
 
 - name: check multiple commands idempotent
   junos_config:
     lines:
       - 'set system host-name {{ inventory_hostname_short }}'
-      - 'set interfaces lo0 unit 0 family inet address 1.1.1.1/32'
+      - 'set interfaces lo0 unit 0 family inet address 192.0.2.1/32'
     provider: "{{ netconf }}"
   register: result
 

test/integration/targets/junos_config/tests/netconf/src_basic.yaml

@@ -48,7 +48,7 @@
 - assert:
     that:
       - "result.changed == true"
-      - "'address 1.1.1.1/32' in result.diff.prepared"
+      - "'address 192.0.2.1/32' in result.diff.prepared"
 
 - name: check device with config
   junos_config:
@@ -79,7 +79,7 @@
 - assert:
     that:
       - "result.changed == true"
-      - "'address 1.1.1.1/32' in result.diff.prepared"
+      - "'address 192.0.2.1/32' in result.diff.prepared"
 
 - name: check device with config
   junos_config:

test/integration/targets/junos_l3_interface/tests/netconf/basic.yaml

@@ -4,7 +4,7 @@
 - name: setup - remove interface address
   junos_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: absent
     provider: "{{ netconf }}"
@@ -12,7 +12,7 @@
 - name: Configure interface address
   junos_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: present
     provider: "{{ netconf }}"
@@ -27,15 +27,15 @@
 - assert:
     that:
       - "result.changed == true"
-      - "'<name>1.1.1.1/32</name>' in config.xml"
+      - "'<name>192.0.2.1/32</name>' in config.xml"
       - "'<name>fd5d:12c9:2201:1::1/128</name>' in config.xml"
-      - result.diff.prepared is search("\+ *address 1.1.1.1/32")
+      - result.diff.prepared is search("\+ *address 192.0.2.1/32")
       - result.diff.prepared is search("\+ *address fd5d:12c9:2201:1::1/128")
 
 - name: Configure interface address (idempotent)
   junos_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: present
     provider: "{{ netconf }}"
@@ -48,7 +48,7 @@
 - name: Deactivate interface address
   junos_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: present
     active: False
@@ -65,13 +65,13 @@
     that:
       - "result.changed == true"
       - "'<address inactive=\"inactive\">' in config.xml"
-      - result.diff.prepared is search("! *inactive[:] address 1.1.1.1/32")
+      - result.diff.prepared is search("! *inactive[:] address 192.0.2.1/32")
       - result.diff.prepared is search("! *inactive[:] address fd5d:12c9:2201:1::1/128")
 
 - name: Activate interface address
   junos_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: present
     active: True
@@ -81,13 +81,13 @@
 - assert:
     that:
       - "result.changed == true"
-      - result.diff.prepared is search("! *active[:] address 1.1.1.1/32")
+      - result.diff.prepared is search("! *active[:] address 192.0.2.1/32")
       - result.diff.prepared is search("! *active[:] address fd5d:12c9:2201:1::1/128")
 
 - name: Delete interface address
   junos_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: absent
     provider: "{{ netconf }}"
@@ -95,13 +95,13 @@
 
 - assert:
     that:
-      - result.diff.prepared is search("\- *address 1.1.1.1/32")
+      - result.diff.prepared is search("\- *address 192.0.2.1/32")
       - result.diff.prepared is search("\- *address fd5d:12c9:2201:1::1/128")
 
 - name: Delete interface address (idempotent)
   junos_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: absent
     provider: "{{ netconf }}"
@@ -114,7 +114,7 @@
 - name: Aggregate setup- delete interface ge-0/0/1
   junos_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: absent
     provider: "{{ netconf }}"
@@ -123,7 +123,7 @@
 - name: Aggregate setup- delete interface ge-0/0/2
   junos_l3_interface:
     name: ge-0/0/2
-    ipv4: 2.2.2.2
+    ipv4: 192.0.2.2
     ipv6: fd5d:12c9:2201:2::2
     state: absent
     provider: "{{ netconf }}"
@@ -133,10 +133,10 @@
   junos_l3_interface:
     aggregate:
     - name: ge-0/0/1
-      ipv4: 1.1.1.1
+      ipv4: 192.0.2.1
       ipv6: fd5d:12c9:2201:1::1
     - name: ge-0/0/2
-      ipv4: 2.2.2.2
+      ipv4: 192.0.2.2
       ipv6: fd5d:12c9:2201:2::2
     provider: "{{ netconf }}"
   register: result
@@ -145,11 +145,11 @@
     that:
       - 'result.changed == true'
       - "'edit interfaces ge-0/0/1 unit 0 family inet' in result.diff.prepared"
-      - result.diff.prepared is search("\+ *address 1.1.1.1/32")
+      - result.diff.prepared is search("\+ *address 192.0.2.1/32")
       - "'edit interfaces ge-0/0/1 unit 0 family inet6' in result.diff.prepared"
       - result.diff.prepared is search("\+ *address fd5d:12c9:2201:1::1/128")
       - "'edit interfaces ge-0/0/2 unit 0 family inet' in result.diff.prepared"
-      - result.diff.prepared is search("\+ *address 2.2.2.2/32")
+      - result.diff.prepared is search("\+ *address 192.0.2.2/32")
       - "'edit interfaces ge-0/0/2 unit 0 family inet6' in result.diff.prepared"
       - result.diff.prepared is search("\+ *address fd5d:12c9:2201:2::2/128")
 
@@ -157,10 +157,10 @@
   junos_l3_interface:
     aggregate:
     - name: ge-0/0/1
-      ipv4: 1.1.1.1
+      ipv4: 192.0.2.1
       ipv6: fd5d:12c9:2201:1::1
     - name: ge-0/0/2
-      ipv4: 2.2.2.2
+      ipv4: 192.0.2.2
       ipv6: fd5d:12c9:2201:2::2
     active: True
     provider: "{{ netconf }}"
@@ -174,10 +174,10 @@
   junos_l3_interface:
     aggregate:
     - name: ge-0/0/1
-      ipv4: 1.1.1.1
+      ipv4: 192.0.2.1
       ipv6: fd5d:12c9:2201:1::1
     - name: ge-0/0/2
-      ipv4: 2.2.2.2
+      ipv4: 192.0.2.2
       ipv6: fd5d:12c9:2201:2::2
     active: False
     provider: "{{ netconf }}"
@@ -186,19 +186,19 @@
 - assert:
     that:
       - 'result.changed == true'
-      - result.diff.prepared is search("! *inactive[:] address 1.1.1.1/32")
+      - result.diff.prepared is search("! *inactive[:] address 192.0.2.1/32")
       - result.diff.prepared is search("! *inactive[:] address fd5d:12c9:2201:1::1/128")
-      - result.diff.prepared is search("! *inactive[:] address 2.2.2.2/32")
+      - result.diff.prepared is search("! *inactive[:] address 192.0.2.2/32")
       - result.diff.prepared is search("! *inactive[:] address fd5d:12c9:2201:2::2/128")
 
 - name: Activate l3 interface configuration
   junos_l3_interface:
     aggregate:
     - name: ge-0/0/1
-      ipv4: 1.1.1.1
+      ipv4: 192.0.2.1
       ipv6: fd5d:12c9:2201:1::1
     - name: ge-0/0/2
-      ipv4: 2.2.2.2
+      ipv4: 192.0.2.2
       ipv6: fd5d:12c9:2201:2::2
     active: True
     provider: "{{ netconf }}"
@@ -207,19 +207,19 @@
 - assert:
     that:
       - 'result.changed == true'
-      - result.diff.prepared is search("! *active[:] address 1.1.1.1/32")
+      - result.diff.prepared is search("! *active[:] address 192.0.2.1/32")
       - result.diff.prepared is search("! *active[:] address fd5d:12c9:2201:1::1/128")
-      - result.diff.prepared is search("! *active[:] address 2.2.2.2/32")
+      - result.diff.prepared is search("! *active[:] address 192.0.2.2/32")
       - result.diff.prepared is search("! *active[:] address fd5d:12c9:2201:2::2/128")
 
 - name: Delete l3 interface configuration
   junos_l3_interface:
     aggregate:
     - name: ge-0/0/1
-      ipv4: 1.1.1.1
+      ipv4: 192.0.2.1
       ipv6: fd5d:12c9:2201:1::1
     - name: ge-0/0/2
-      ipv4: 2.2.2.2
+      ipv4: 192.0.2.2
       ipv6: fd5d:12c9:2201:2::2
     state: absent
     provider: "{{ netconf }}"
@@ -229,11 +229,11 @@
     that:
       - 'result.changed == true'
       - "'edit interfaces ge-0/0/1 unit 0 family inet' in result.diff.prepared"
-      - result.diff.prepared is search("\- *address 1.1.1.1/32")
+      - result.diff.prepared is search("\- *address 192.0.2.1/32")
       - "'edit interfaces ge-0/0/1 unit 0 family inet6' in result.diff.prepared"
       - result.diff.prepared is search("\- *address fd5d:12c9:2201:1::1/128")
       - "'edit interfaces ge-0/0/2 unit 0 family inet' in result.diff.prepared"
-      - result.diff.prepared is search("\- *address 2.2.2.2/32")
+      - result.diff.prepared is search("\- *address 192.0.2.2/32")
       - "'edit interfaces ge-0/0/2 unit 0 family inet6' in result.diff.prepared"
       - result.diff.prepared is search("\- *address fd5d:12c9:2201:2::2/128")
 
@@ -241,10 +241,10 @@
   junos_l3_interface:
     aggregate:
     - name: ge-0/0/1
-      ipv4: 1.1.1.1
+      ipv4: 192.0.2.1
       ipv6: fd5d:12c9:2201:1::1
     - name: ge-0/0/2
-      ipv4: 2.2.2.2
+      ipv4: 192.0.2.2
       ipv6: fd5d:12c9:2201:2::2
     state: absent
     provider: "{{ netconf }}"

test/integration/targets/junos_l3_interface/tests/netconf/net_l3_interface.yaml

@@ -7,7 +7,7 @@
 - name: setup - remove interface address
   net_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: absent
     provider: "{{ netconf }}"
@@ -15,7 +15,7 @@
 - name: Configure interface address using platform agnostic module
   net_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: present
     provider: "{{ netconf }}"
@@ -30,15 +30,15 @@
 - assert:
     that:
       - "result.changed == true"
-      - "'<name>1.1.1.1/32</name>' in config.xml"
+      - "'<name>192.0.2.1/32</name>' in config.xml"
       - "'<name>fd5d:12c9:2201:1::1/128</name>' in config.xml"
-      - result.diff.prepared is search("\+ *address 1.1.1.1/32")
+      - result.diff.prepared is search("\+ *address 192.0.2.1/32")
       - result.diff.prepared is search("\+ *address fd5d:12c9:2201:1::1/128")
 
 - name: teardown - remove interface address
   net_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: absent
     provider: "{{ netconf }}"

test/integration/targets/junos_smoke/tests/netconf/module_utils_junos.yaml

@@ -62,7 +62,7 @@
 - name: setup - remove interface address
   net_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: absent
     provider: "{{ netconf }}"
@@ -70,7 +70,7 @@
 - name: Configure interface address using platform agnostic module
   net_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: present
     provider: "{{ netconf }}"
@@ -85,15 +85,15 @@
 - assert:
     that:
       - "result.changed == true"
-      - "'<name>1.1.1.1/32</name>' in config.xml"
+      - "'<name>192.0.2.1/32</name>' in config.xml"
       - "'<name>fd5d:12c9:2201:1::1/128</name>' in config.xml"
-      - result.diff.prepared is search("\+ *address 1.1.1.1/32")
+      - result.diff.prepared is search("\+ *address 192.0.2.1/32")
       - result.diff.prepared is search("\+ *address fd5d:12c9:2201:1::1/128")
 
 - name: teardown - remove interface address
   net_l3_interface:
     name: ge-0/0/1
-    ipv4: 1.1.1.1
+    ipv4: 192.0.2.1
     ipv6: fd5d:12c9:2201:1::1
     state: absent
     provider: "{{ netconf }}"

test/integration/targets/junos_vrf/tests/netconf/basic.yaml

@@ -14,7 +14,7 @@
     interfaces:
           - ge-0/0/6
           - ge-0/0/5
-    rd: 3.3.3.3:10
+    rd: 192.0.2.3:10
     target: target:65513:111
     state: present
     provider: "{{ netconf }}"
@@ -28,7 +28,7 @@
       - result.diff.prepared is search("\+ *instance-type vrf")
       - result.diff.prepared is search("\+ *interface ge-0/0/5.0")
       - result.diff.prepared is search("\+ *interface ge-0/0/6.0")
-      - result.diff.prepared is search("\+ *route-distinguisher 3.3.3.3:10")
+      - result.diff.prepared is search("\+ *route-distinguisher 192.0.2.3:10")
       - result.diff.prepared is search("\+ *vrf-target target:65513:111")
 
 - name: Configure vrf and its parameter (idempotent)
@@ -38,7 +38,7 @@
     interfaces:
           - ge-0/0/6
           - ge-0/0/5
-    rd: 3.3.3.3:10
+    rd: 192.0.2.3:10
     target: target:65513:111
     state: present
     provider: "{{ netconf }}"
@@ -55,7 +55,7 @@
     interfaces:
           - ge-0/0/3
           - ge-0/0/2
-    rd: 1.1.1.1:10
+    rd: 192.0.2.1:10
     target: target:65514:113
     state: present
     provider: "{{ netconf }}"
@@ -68,7 +68,7 @@
       - result.diff.prepared is search("\+ *interface ge-0/0/2.0")
       - result.diff.prepared is search("\+ *interface ge-0/0/3.0")
       - "'[edit routing-instances test-1]' in result.diff.prepared"
-      - result.diff.prepared is search("\+ *route-distinguisher 1.1.1.1:10")
+      - result.diff.prepared is search("\+ *route-distinguisher 192.0.2.1:10")
       - result.diff.prepared is search("\+ *vrf-target target:65514:113")
 
 - name: Deactivate vrf
@@ -78,7 +78,7 @@
     interfaces:
           - ge-0/0/3
           - ge-0/0/2
-    rd: 1.1.1.1:10
+    rd: 192.0.2.1:10
     target: target:65514:113
     state: present
     active: False
@@ -104,7 +104,7 @@
     interfaces:
           - ge-0/0/3
           - ge-0/0/2
-    rd: 1.1.1.1:10
+    rd: 192.0.2.1:10
     target: target:65514:113
     state: present
     active: True
@@ -130,7 +130,7 @@
     interfaces:
           - ge-0/0/3
           - ge-0/0/2
-    rd: 1.1.1.1:10
+    rd: 192.0.2.1:10
     target: target:65514:113
     state: absent
     provider: "{{ netconf }}"
@@ -144,7 +144,7 @@
       - result.diff.prepared is search("\- *instance-type vrf")
       - result.diff.prepared is search("\- *interface ge-0/0/2.0")
       - result.diff.prepared is search("\- *interface ge-0/0/3.0")
-      - result.diff.prepared is search("\- *route-distinguisher 1.1.1.1:10")
+      - result.diff.prepared is search("\- *route-distinguisher 192.0.2.1:10")
       - result.diff.prepared is search("\- *vrf-target target:65514:113")
 
 - name: Delete vrf (idempotent)
@@ -154,7 +154,7 @@
     interfaces:
           - ge-0/0/3
           - ge-0/0/2
-    rd: 1.1.1.1:10
+    rd: 192.0.2.1:10
     target: target:65514:113
     state: absent
     provider: "{{ netconf }}"
@@ -181,14 +181,14 @@
       interfaces:
         - ge-0/0/3
         - ge-0/0/2
-      rd: 1.1.1.1:10
+      rd: 192.0.2.1:10
       target: target:65514:113
     - name: test-2
       description: test-vrf-2
       interfaces:
         - ge-0/0/4
         - ge-0/0/5
-      rd: 2.2.2.2:10
+      rd: 192.0.2.2:10
       target: target:65515:114
     provider: "{{ netconf }}"
   register: result
@@ -201,14 +201,14 @@
       - result.diff.prepared is search("\+ *instance-type vrf")
       - result.diff.prepared is search("\+ *interface ge-0/0/2.0")
       - result.diff.prepared is search("\+ *interface ge-0/0/3.0")
-      - result.diff.prepared is search("\+ *route-distinguisher 1.1.1.1:10")
+      - result.diff.prepared is search("\+ *route-distinguisher 192.0.2.1:10")
       - result.diff.prepared is search("\+ *vrf-target target:65514:113")
       - result.diff.prepared is search("\+ *test-2")
       - result.diff.prepared is search("\+ *description test-vrf-2")
       - result.diff.prepared is search("\+ *instance-type vrf")
       - result.diff.prepared is search("\+ *interface ge-0/0/4.0")
       - result.diff.prepared is search("\+ *interface ge-0/0/5.0")
-      - result.diff.prepared is search("\+ *route-distinguisher 2.2.2.2:10")
+      - result.diff.prepared is search("\+ *route-distinguisher 192.0.2.2:10")
       - result.diff.prepared is search("\+ *vrf-target target:65515:114")
 
 - name: Deactivate vrf configuration using aggregate
@@ -219,14 +219,14 @@
       interfaces:
         - ge-0/0/3
         - ge-0/0/2
-      rd: 1.1.1.1:10
+      rd: 192.0.2.1:10
       target: target:65514:113
     - name: test-2
       description: test-vrf-2
       interfaces:
         - ge-0/0/4
         - ge-0/0/5
-      rd: 2.2.2.2:10
+      rd: 192.0.2.2:10
       target: target:65515:114
     active: False
     provider: "{{ netconf }}"
@@ -254,14 +254,14 @@
       interfaces:
         - ge-0/0/3
         - ge-0/0/2
-      rd: 1.1.1.1:10
+      rd: 192.0.2.1:10
       target: target:65514:113
     - name: test-2
       description: test-vrf-2
       interfaces:
         - ge-0/0/4
         - ge-0/0/5
-      rd: 2.2.2.2:10
+      rd: 192.0.2.2:10
       target: target:65515:114
     active: True
     provider: "{{ netconf }}"
@@ -298,14 +298,14 @@
       - result.diff.prepared is search("\- *instance-type vrf")
       - result.diff.prepared is search("\- *interface ge-0/0/2.0")
       - result.diff.prepared is search("\- *interface ge-0/0/3.0")
-      - result.diff.prepared is search("\- *route-distinguisher 1.1.1.1:10")
+      - result.diff.prepared is search("\- *route-distinguisher 192.0.2.1:10")
       - result.diff.prepared is search("\- *vrf-target target:65514:113")
       - result.diff.prepared is search("\- *test-2")
       - result.diff.prepared is search("\- *description test-vrf-2")
       - result.diff.prepared is search("\- *instance-type vrf")
       - result.diff.prepared is search("\- *interface ge-0/0/4.0")
       - result.diff.prepared is search("\- *interface ge-0/0/5.0")
-      - result.diff.prepared is search("\- *route-distinguisher 2.2.2.2:10")
+      - result.diff.prepared is search("\- *route-distinguisher 192.0.2.2:10")
       - result.diff.prepared is search("\- *vrf-target target:65515:114")
 
 - name: Delete vrf configuration using aggregate (idempotent)

test/integration/targets/junos_vrf/tests/netconf/net_vrf.yaml

@@ -17,7 +17,7 @@
     interfaces:
           - ge-0/0/6
           - ge-0/0/5
-    rd: 3.3.3.3:10
+    rd: 192.0.2.3:10
     target: target:65513:111
     state: present
     provider: "{{ netconf }}"
@@ -31,7 +31,7 @@
       - result.diff.prepared is search("\+ *instance-type vrf")
       - result.diff.prepared is search("\+ *interface ge-0/0/5.0")
       - result.diff.prepared is search("\+ *interface ge-0/0/6.0")
-      - result.diff.prepared is search("\+ *route-distinguisher 3.3.3.3:10")
+      - result.diff.prepared is search("\+ *route-distinguisher 192.0.2.3:10")
       - result.diff.prepared is search("\+ *vrf-target target:65513:111")
 
 - name: teardown - remove vrf

test/integration/targets/nxos_acl/tests/common/sanity.yaml

@@ -19,7 +19,7 @@
     seq: 10
     action: permit
     proto: tcp
-    src: 1.1.1.1/24
+    src: 192.0.2.1/24
     src_port_op: range
     src_port1: 1900
     src_port2: 1910
@@ -57,7 +57,7 @@
     seq: 10
     action: deny
     proto: tcp
-    src: 1.1.1.1/24
+    src: 192.0.2.1/24
     src_port_op: range
     src_port1: 1900
     src_port2: 1910

test/integration/targets/nxos_acl_interface/tests/common/sanity.yaml

@@ -37,7 +37,7 @@
     seq: 10
     action: permit
     proto: tcp
-    src: 1.1.1.1/24
+    src: 192.0.2.1/24
     dest: any
 
 - block:

test/integration/targets/nxos_bgp/tests/common/param.yaml

@@ -20,7 +20,7 @@
     nxos_bgp: &set_multi_vrf
       asn: 65535
       vrf: "{{ item }}"
-      router_id: 1.1.1.1
+      router_id: 192.0.2.1
       bestpath_always_compare_med: true
       bestpath_aspath_multipath_relax: true
       bestpath_compare_routerid: true

test/integration/targets/nxos_bgp/tests/common/sanity.yaml

@@ -29,7 +29,7 @@
   - name: "Configure BGP defaults"
     nxos_bgp: &configure_default
       asn: 65535
-      router_id: 1.1.1.1
+      router_id: 192.0.2.1
       state: present
     register: result
 
@@ -60,7 +60,7 @@
   - name: "Configure BGP non defaults"
     nxos_bgp: &configure_non_default
       asn: 65535
-      router_id: 1.1.1.1
+      router_id: 192.0.2.1
       bestpath_always_compare_med: true
       bestpath_aspath_multipath_relax: true
       bestpath_compare_routerid: true

test/integration/targets/nxos_bgp_neighbor/tests/common/sanity.yaml

@@ -24,7 +24,7 @@
 - name: "Setup"
   nxos_bgp_neighbor: &removenp
     asn: 65535
-    neighbor: 3.3.3.3
+    neighbor: 192.0.2.3
     vrf: "{{ item }}"
     state: absent
   with_items: "{{ vrfs }}"
@@ -33,7 +33,7 @@
 - name: "Setup"
   nxos_bgp_neighbor: &remove
     asn: 65535
-    neighbor: 3.3.3.3/32
+    neighbor: 192.0.2.3/32
     vrf: "{{ item }}"
     state: absent
   with_items: "{{ vrfs }}"
@@ -43,7 +43,7 @@
   - name: "Configure BGP neighbor1"
     nxos_bgp_neighbor: &configure1
       asn: 65535
-      neighbor: 3.3.3.3/32
+      neighbor: 192.0.2.3/32
       vrf: "{{ item }}"
       connected_check: true
       capability_negotiation: true
@@ -80,7 +80,7 @@
   - name: "Configure BGP neighbor2"
     nxos_bgp_neighbor: &configure2
       asn: 65535
-      neighbor: 3.3.3.3/32
+      neighbor: 192.0.2.3/32
       vrf: "{{ item }}"
       connected_check: False
       capability_negotiation: False
@@ -127,7 +127,7 @@
   - name: "Configure BGP neighbor3"
     nxos_bgp_neighbor: &configure3
       asn: 65535
-      neighbor: 3.3.3.3/32
+      neighbor: 192.0.2.3/32
       vrf: "{{ item }}"
       description: "tested by ansible"
       remove_private_as: "{{remove_private_asa|default(omit)}}"
@@ -147,7 +147,7 @@
   - name: "Configure BGP neighbor4"
     nxos_bgp_neighbor: &configure4
       asn: 65535
-      neighbor: 3.3.3.3/32
+      neighbor: 192.0.2.3/32
       vrf: "{{ item }}"
       description: "tested by ansible"
       remove_private_as: "{{remove_private_asr|default(omit)}}"
@@ -174,7 +174,7 @@
   - name: "Configure BGP neighbor 3des password"
     nxos_bgp_neighbor: &configure_3des_password
       asn: 65535
-      neighbor: 3.3.3.3/32
+      neighbor: 192.0.2.3/32
       vrf: "{{ item }}"
       remote_as: 30
       pwd: '386c0565965f89de'
@@ -201,7 +201,7 @@
   - name: "Configure BGP neighbor type 7 password"
     nxos_bgp_neighbor: &configure_type7_password
       asn: 65535
-      neighbor: 3.3.3.3/32
+      neighbor: 192.0.2.3/32
       vrf: "{{ item }}"
       remote_as: 30
       pwd: '386c0565965f89de'
@@ -221,7 +221,7 @@
   - name: "Remove BGP neighbor password"
     nxos_bgp_neighbor: &remove_password
       asn: 65535
-      neighbor: 3.3.3.3/32
+      neighbor: 192.0.2.3/32
       vrf: "{{ item }}"
       remote_as: 30
       pwd: default
@@ -248,7 +248,7 @@
   - name: "Configure BGP neighbor transport type passive"
     nxos_bgp_neighbor: &configure_transport_passive
       asn: 65535
-      neighbor: 3.3.3.3
+      neighbor: 192.0.2.3
       vrf: "{{ item }}"
       remote_as: 30
       transport_passive_only: true
@@ -267,7 +267,7 @@
   - name: "Configure BGP neighbor transport type default"
     nxos_bgp_neighbor: &configure_transport_default
       asn: 65535
-      neighbor: 3.3.3.3
+      neighbor: 192.0.2.3
       vrf: "{{ item }}"
       remote_as: 30
       transport_passive_only: false

test/integration/targets/nxos_bgp_neighbor_af/tests/common/sanity.yaml

@@ -22,7 +22,7 @@
   - name: "Configure BGP neighbor address-family"
     nxos_bgp_neighbor_af: &configure1
       asn: 65535
-      neighbor: '3.3.3.3'
+      neighbor: '192.0.2.3'
       afi: ipv4
       safi: unicast
       additional_paths_receive: 'enable'
@@ -63,7 +63,7 @@
   - name: "Configure BGP neighbor address-family def1"
     nxos_bgp_neighbor_af: &configure_def1
       asn: 65535
-      neighbor: '3.3.3.3'
+      neighbor: '192.0.2.3'
       afi: ipv4
       safi: unicast
       additional_paths_receive: 'inherit'
@@ -100,7 +100,7 @@
   - name: "Setup: Remove BGP config"
     nxos_bgp_neighbor_af: &removenaf
       asn: 65535
-      neighbor: '3.3.3.3'
+      neighbor: '192.0.2.3'
       afi: ipv4
       safi: unicast
       state: absent
@@ -117,7 +117,7 @@
   - name: "Configure BGP neighbor address-family"
     nxos_bgp_neighbor_af: &configure2
       asn: 65535
-      neighbor: '3.3.3.3'
+      neighbor: '192.0.2.3'
       afi: ipv4
       safi: unicast
       allowas_in_max: '5'
@@ -142,7 +142,7 @@
   - name: "Configure BGP neighbor address-family def2"
     nxos_bgp_neighbor_af: &configure_def2
       asn: 65535
-      neighbor: '3.3.3.3'
+      neighbor: '192.0.2.3'
       afi: ipv4
       safi: unicast
       allowas_in_max: default
@@ -180,14 +180,14 @@
     nxos_bgp_neighbor:
       asn: 65535
       vrf: 'blue'
-      neighbor: '3.3.3.3'
+      neighbor: '192.0.2.3'
       remote_as: 2
 
   - name: "Configure BGP neighbor 3"
     nxos_bgp_neighbor_af: &configure3
       asn: 65535
       vrf: 'blue'
-      neighbor: '3.3.3.3'
+      neighbor: '192.0.2.3'
       afi: ipv4
       safi: unicast
       additional_paths_receive: 'disable'
@@ -211,7 +211,7 @@
     nxos_bgp_neighbor_af: &configure_def3
       asn: 65535
       vrf: 'blue'
-      neighbor: '3.3.3.3'
+      neighbor: '192.0.2.3'
       afi: ipv4
       safi: unicast
       additional_paths_receive: 'inherit'
@@ -241,13 +241,13 @@
   - name: "Configure BGP neighbor af route_reflector_client"
     nxos_bgp_neighbor:
       asn: 65535
-      neighbor: '2.2.2.2'
+      neighbor: '192.0.2.2'
       remote_as: 65535
 
   - name: "Configure BGP neighbor 4"
     nxos_bgp_neighbor_af: &configure4
       asn: 65535
-      neighbor: '2.2.2.2'
+      neighbor: '192.0.2.2'
       afi: ipv4
       safi: unicast
       route_reflector_client: 'true'
@@ -264,7 +264,7 @@
   - name: "Configure BGP neighbor def4"
     nxos_bgp_neighbor_af: &configure_def4
       asn: 65535
-      neighbor: '2.2.2.2'
+      neighbor: '192.0.2.2'
       afi: ipv4
       safi: unicast
       route_reflector_client: False

test/integration/targets/nxos_command/tests/cli/sanity.yaml

@@ -26,7 +26,7 @@
   - name: "Configure BGP defaults"
     nxos_bgp: &configure_default
       asn: 65535
-      router_id: 1.1.1.1
+      router_id: 192.0.2.1
       state: present
     register: result
 

test/integration/targets/nxos_command/tests/nxapi/sanity.yaml

@@ -26,7 +26,7 @@
   - name: "Configure BGP defaults"
     nxos_bgp: &configure_default
       asn: 65535
-      router_id: 1.1.1.1
+      router_id: 192.0.2.1
       state: present
     register: result
 

test/integration/targets/nxos_config/tests/cli/sublevel_exact.yaml

@@ -4,11 +4,11 @@
 - name: setup
   nxos_config:
     commands:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
-      - 50 permit ip 5.5.5.5/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
+      - 50 permit ip 192.0.2.5/32 any log
     parents: ip access-list test
     before: no ip access-list test
     match: none
@@ -16,10 +16,10 @@
 - name: configure sub level command using exact match
   nxos_config:
     commands:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     match: exact
   register: result
@@ -28,20 +28,20 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'10 permit ip 1.1.1.1/32 any log' in result.updates"
-      - "'20 permit ip 2.2.2.2/32 any log' in result.updates"
-      - "'30 permit ip 3.3.3.3/32 any log' in result.updates"
-      - "'40 permit ip 4.4.4.4/32 any log' in result.updates"
-      - "'50 permit ip 5.5.5.5/32 any log' not in result.updates"
+      - "'10 permit ip 192.0.2.1/32 any log' in result.updates"
+      - "'20 permit ip 192.0.2.2/32 any log' in result.updates"
+      - "'30 permit ip 192.0.2.3/32 any log' in result.updates"
+      - "'40 permit ip 192.0.2.4/32 any log' in result.updates"
+      - "'50 permit ip 192.0.2.5/32 any log' not in result.updates"
 
 - name: check sub level command using exact match
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
-      - 50 permit ip 5.5.5.5/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
+      - 50 permit ip 192.0.2.5/32 any log
     parents: ip access-list test
     match: exact
   register: result

test/integration/targets/nxos_config/tests/cli/sublevel_strict.yaml

@@ -4,11 +4,11 @@
 - name: setup
   nxos_config:
     commands:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
-      - 50 permit ip 5.5.5.5/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
+      - 50 permit ip 192.0.2.5/32 any log
     parents: ip access-list test
     before: no ip access-list test
     match: none
@@ -16,10 +16,10 @@
 - name: configure sub level command using strict match
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     before: no ip access-list test
     match: strict
@@ -30,19 +30,19 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'10 permit ip 1.1.1.1/32 any log' in result.updates"
-      - "'20 permit ip 2.2.2.2/32 any log' in result.updates"
-      - "'30 permit ip 3.3.3.3/32 any log' in result.updates"
-      - "'40 permit ip 4.4.4.4/32 any log' in result.updates"
-      - "'50 permit ip 5.5.5.5/32 any log' not in result.updates"
+      - "'10 permit ip 192.0.2.1/32 any log' in result.updates"
+      - "'20 permit ip 192.0.2.2/32 any log' in result.updates"
+      - "'30 permit ip 192.0.2.3/32 any log' in result.updates"
+      - "'40 permit ip 192.0.2.4/32 any log' in result.updates"
+      - "'50 permit ip 192.0.2.5/32 any log' not in result.updates"
 
 - name: check sub level command using strict match
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     match: strict
   register: result

test/integration/targets/nxos_config/tests/common/sanity.yaml

@@ -9,11 +9,11 @@
 - name: "nxos_config sanity test"
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
-      - 50 permit ip 5.5.5.5/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
+      - 50 permit ip 192.0.2.5/32 any log
     parents: ip access-list test
     before: no ip access-list test
     match: exact
@@ -21,10 +21,10 @@
 - name: "nxos_config sanity test - replace block"
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     before: no ip access-list test
     replace: block

test/integration/targets/nxos_config/tests/common/sublevel_block.yaml

@@ -10,10 +10,10 @@
 - name: configure sub level command using block replace
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     replace: block
   register: result
@@ -22,18 +22,18 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'10 permit ip 1.1.1.1/32 any log' in result.updates"
-      - "'20 permit ip 2.2.2.2/32 any log' in result.updates"
-      - "'30 permit ip 3.3.3.3/32 any log' in result.updates"
-      - "'40 permit ip 4.4.4.4/32 any log' in result.updates"
+      - "'10 permit ip 192.0.2.1/32 any log' in result.updates"
+      - "'20 permit ip 192.0.2.2/32 any log' in result.updates"
+      - "'30 permit ip 192.0.2.3/32 any log' in result.updates"
+      - "'40 permit ip 192.0.2.4/32 any log' in result.updates"
 
 - name: check sub level command using block replace
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     replace: block
   register: result

test/integration/targets/nxos_config/tests/nxapi/sublevel_exact.yaml

@@ -4,11 +4,11 @@
 - name: setup
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
-      - 50 permit ip 5.5.5.5/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
+      - 50 permit ip 192.0.2.5/32 any log
     parents: ip access-list test
     match: none
   ignore_errors: yes
@@ -16,10 +16,10 @@
 - name: configure sub level command using exact match
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     before: no ip access-list test
     match: exact
@@ -30,19 +30,19 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'10 permit ip 1.1.1.1/32 any log' in result.updates"
-      - "'20 permit ip 2.2.2.2/32 any log' in result.updates"
-      - "'30 permit ip 3.3.3.3/32 any log' in result.updates"
-      - "'40 permit ip 4.4.4.4/32 any log' in result.updates"
-      - "'50 permit ip 5.5.5.5/32 any log' not in result.updates"
+      - "'10 permit ip 192.0.2.1/32 any log' in result.updates"
+      - "'20 permit ip 192.0.2.2/32 any log' in result.updates"
+      - "'30 permit ip 192.0.2.3/32 any log' in result.updates"
+      - "'40 permit ip 192.0.2.4/32 any log' in result.updates"
+      - "'50 permit ip 192.0.2.5/32 any log' not in result.updates"
 
 - name: check sub level command using exact match
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     match: exact
   register: result

test/integration/targets/nxos_config/tests/nxapi/sublevel_strict.yaml

@@ -4,21 +4,21 @@
 - name: setup
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
-      - 50 permit ip 5.5.5.5/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
+      - 50 permit ip 192.0.2.5/32 any log
     parents: ip access-list test
     match: none
 
 - name: configure sub level command using strict match
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 30 permit ip 2.2.2.2/32 any log
-      - 20 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 30 permit ip 192.0.2.2/32 any log
+      - 20 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     before: no ip access-list test
     match: strict
@@ -29,19 +29,19 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'10 permit ip 1.1.1.1/32 any log' in result.updates"
-      - "'30 permit ip 2.2.2.2/32 any log' in result.updates"
-      - "'20 permit ip 3.3.3.3/32 any log' in result.updates"
-      - "'40 permit ip 4.4.4.4/32 any log' in result.updates"
-      - "'50 permit ip 5.5.5.5/32 any log' not in result.updates"
+      - "'10 permit ip 192.0.2.1/32 any log' in result.updates"
+      - "'30 permit ip 192.0.2.2/32 any log' in result.updates"
+      - "'20 permit ip 192.0.2.3/32 any log' in result.updates"
+      - "'40 permit ip 192.0.2.4/32 any log' in result.updates"
+      - "'50 permit ip 192.0.2.5/32 any log' not in result.updates"
 
 - name: check sub level command using strict match
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 3.3.3.3/32 any log
-      - 30 permit ip 2.2.2.2/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.3/32 any log
+      - 30 permit ip 192.0.2.2/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     match: strict
   register: result

test/integration/targets/nxos_evpn_vni/tests/common/sanity.yaml

@@ -31,7 +31,7 @@
       route_target_export:
           - auto
           - "5000:10"
-          - "1.1.1.1:43"
+          - "192.0.2.1:43"
     register: result
 
   - assert: &true

test/integration/targets/nxos_hsrp/tests/common/sanity.yaml

@@ -57,7 +57,7 @@
     nxos_hsrp: &conf100
       group: 100
       version: 2
-      vip: 2.2.2.2
+      vip: 192.0.2.2
       priority: 25
       interface: "{{ intname1 }}"
       preempt: enabled
@@ -96,7 +96,7 @@
   - name: "configure group 200"
     nxos_hsrp: &conf200
       group: 200
-      vip: 3.3.3.3
+      vip: 192.0.2.3
       version: 1
       interface: "{{ intname2 }}"
       auth_type: text
@@ -114,7 +114,7 @@
   - name: "change group 200"
     nxos_hsrp: &chg200
       group: 200
-      vip: 3.3.3.3
+      vip: 192.0.2.3
       version: 2
       interface: "{{ intname2 }}"
       auth_type: text

test/integration/targets/nxos_igmp_interface/tests/common/sanity.yaml

@@ -50,7 +50,7 @@
       group_timeout: 300
       # deprecated
       oif_prefix: 239.255.255.2
-      oif_source: 1.1.1.1
+      oif_source: 192.0.2.1
       state: present
     register: result
 
@@ -82,7 +82,7 @@
       oif_ps:
         - {'prefix': '238.2.2.6'}
         - {'prefix': '238.2.2.5'}
-        - {'source': '1.1.1.1', 'prefix': '238.2.2.5'}
+        - {'source': '192.0.2.1', 'prefix': '238.2.2.5'}
       state: present
     register: result
 

test/integration/targets/nxos_interface_ospf/tests/common/sanity.yaml

@@ -209,7 +209,7 @@
     nxos_interface_ospf: &configurelb
       interface: LOOPBACK55
       ospf: 1
-      area: 4.4.4.4
+      area: 192.0.2.4
       cost: 55
       hello_interval: 15
       dead_interval: 75

test/integration/targets/nxos_ntp/tests/common/sanity.yaml

@@ -9,7 +9,7 @@
     key_id: 32
     prefer: disabled
     vrf_name: management
-    source_addr: 5.5.5.5
+    source_addr: 192.0.2.5
     state: absent
   ignore_errors: yes
 
@@ -21,7 +21,7 @@
       key_id: 32
       prefer: enabled
       vrf_name: management
-      source_addr: 5.5.5.5
+      source_addr: 192.0.2.5
       state: present
     register: result
 

test/integration/targets/nxos_ospf_vrf/tests/common/sanity.yaml

@@ -13,7 +13,7 @@
   - name: Configure ospf vrf
     nxos_ospf_vrf: &config
       ospf: 1
-      router_id: 1.1.1.1
+      router_id: 192.0.2.1
       timer_throttle_spf_start: 50
       timer_throttle_spf_hold: 1000
       timer_throttle_spf_max: 2000

test/integration/targets/nxos_smoke/tests/common/common_config.yaml

@@ -70,10 +70,10 @@
 - name: configure sub level command using block replace - exact
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     replace: block
     provider: "{{ connection }}"
@@ -84,19 +84,19 @@
     that:
       - "result.changed == true"
       - "'ip access-list test' in result.updates"
-      - "'10 permit ip 1.1.1.1/32 any log' in result.updates"
-      - "'20 permit ip 2.2.2.2/32 any log' in result.updates"
-      - "'30 permit ip 3.3.3.3/32 any log' in result.updates"
-      - "'40 permit ip 4.4.4.4/32 any log' in result.updates"
+      - "'10 permit ip 192.0.2.1/32 any log' in result.updates"
+      - "'20 permit ip 192.0.2.2/32 any log' in result.updates"
+      - "'30 permit ip 192.0.2.3/32 any log' in result.updates"
+      - "'40 permit ip 192.0.2.4/32 any log' in result.updates"
 
 # hit NetworkConfig._diff_strict
 - name: configure sub level command using block replace strict
   nxos_config:
     lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
+      - 10 permit ip 192.0.2.1/32 any log
+      - 20 permit ip 192.0.2.2/32 any log
+      - 30 permit ip 192.0.2.3/32 any log
+      - 40 permit ip 192.0.2.4/32 any log
     parents: ip access-list test
     replace: block
     provider: "{{ connection }}"
@@ -111,7 +111,7 @@
   - name: create static route
     nxos_static_route: &configure
       prefix: "192.168.20.64/24"
-      next_hop: "3.3.3.3"
+      next_hop: "192.0.2.3"
       route_name: testing
       pref: 100
       tag: 5500
@@ -126,7 +126,7 @@
   - name: remove static route
     nxos_static_route: &remove
       prefix: "192.168.20.64/24"
-      next_hop: "3.3.3.3"
+      next_hop: "192.0.2.3"
       route_name: testing
       pref: 100
       tag: 5500
@@ -141,7 +141,7 @@
   - name: remove static route
     nxos_static_route:
       prefix: "192.168.20.64/24"
-      next_hop: "3.3.3.3"
+      next_hop: "192.0.2.3"
       route_name: testing
       pref: 100
       tag: 5500
@@ -153,8 +153,8 @@
   - name: remove static route aggregate
     nxos_static_route:
       aggregate:
-        - { prefix: "192.168.22.64/24", next_hop: "3.3.3.3" }
-        - { prefix: "192.168.24.64/24", next_hop: "3.3.3.3" }
+        - { prefix: "192.168.22.64/24", next_hop: "192.0.2.3" }
+        - { prefix: "192.168.24.64/24", next_hop: "192.0.2.3" }
       state: absent
       provider: "{{ connection }}"
     ignore_errors: yes

test/integration/targets/nxos_snmp_host/tests/common/sanity_snmp_v1_trap.yaml

@@ -12,7 +12,7 @@
 
 - name: Setup - Remove snmp_host if configured
   nxos_snmp_host: &remove
-    snmp_host: 3.3.3.3
+    snmp_host: 192.0.2.3
     community: TESTING
     version: "{{ snmp_version }}" 
     snmp_type: "{{ snmp_type }}" 
@@ -27,7 +27,7 @@
 
   - name: Configure snmp host 
     nxos_snmp_host: &config
-      snmp_host: 3.3.3.3
+      snmp_host: 192.0.2.3
       community: TESTING
       version: "{{ snmp_version }}" 
       snmp_type: "{{ snmp_type }}" 
@@ -53,7 +53,7 @@
   - block:
     - name: Add another vrf to filter
       nxos_snmp_host: &config1
-        snmp_host: 3.3.3.3
+        snmp_host: 192.0.2.3
         vrf_filter: default
         udp: 222
         state: present 
@@ -70,7 +70,7 @@
 
   - name: remove some configuration
     nxos_snmp_host: &rem1
-      snmp_host: 3.3.3.3
+      snmp_host: 192.0.2.3
       udp: 222
       src_intf: "{{ intname|default(omit) }}"
       vrf: management
@@ -89,7 +89,7 @@
   - block:
     - name: remove some more configuration
       nxos_snmp_host: &rem2
-        snmp_host: 3.3.3.3
+        snmp_host: 192.0.2.3
         udp: 222
         vrf_filter: default
         state: absent

test/integration/targets/nxos_snmp_host/tests/common/sanity_snmp_v2_inform.yaml

@@ -12,7 +12,7 @@
 
 - name: Setup - Remove snmp_host if configured
   nxos_snmp_host: &remove
-    snmp_host: 3.3.3.3
+    snmp_host: 192.0.2.3
     community: TESTING
     version: "{{ snmp_version }}" 
     snmp_type: "{{ snmp_type }}" 
@@ -27,7 +27,7 @@
 
   - name: Configure snmp host 
     nxos_snmp_host: &config
-      snmp_host: 3.3.3.3
+      snmp_host: 192.0.2.3
       community: TESTING
       version: "{{ snmp_version }}" 
       snmp_type: "{{ snmp_type }}" 
@@ -53,7 +53,7 @@
   - block:
     - name: Add another vrf to filter
       nxos_snmp_host: &config1
-        snmp_host: 3.3.3.3
+        snmp_host: 192.0.2.3
         vrf_filter: default
         udp: 222
         state: present 
@@ -70,7 +70,7 @@
 
   - name: remove some configuration
     nxos_snmp_host: &rem1
-      snmp_host: 3.3.3.3
+      snmp_host: 192.0.2.3
       udp: 222
       src_intf: "{{ intname|default(omit) }}"
       vrf: management
@@ -89,7 +89,7 @@
   - block:
     - name: remove some more configuration
       nxos_snmp_host: &rem2
-        snmp_host: 3.3.3.3
+        snmp_host: 192.0.2.3
         udp: 222
         vrf_filter: default
         state: absent

test/integration/targets/nxos_snmp_host/tests/common/sanity_snmp_v3_inform.yaml

@@ -17,7 +17,7 @@
 
 - name: Setup - Remove snmp_host if configured
   nxos_snmp_host: &remove
-    snmp_host: 3.3.3.3
+    snmp_host: 192.0.2.3
     community: TESTING
     version: "{{ snmp_version }}" 
     snmp_type: "{{ snmp_type }}" 
@@ -32,7 +32,7 @@
 
   - name: Configure snmp host 
     nxos_snmp_host: &config
-      snmp_host: 3.3.3.3
+      snmp_host: 192.0.2.3
       community: TESTING
       v3: "{{ snmp_auth|default(omit) }}"
       version: "{{ snmp_version }}" 
@@ -58,7 +58,7 @@
   - block:
     - name: Add another vrf to filter
       nxos_snmp_host: &config1
-        snmp_host: 3.3.3.3
+        snmp_host: 192.0.2.3
         vrf_filter: default
         state: present 
       register: result
@@ -74,7 +74,7 @@
 
   - name: remove some configuration
     nxos_snmp_host: &rem1
-      snmp_host: 3.3.3.3
+      snmp_host: 192.0.2.3
       src_intf: "{{ intname|default(omit) }}"
       vrf: management
       vrf_filter: management
@@ -92,7 +92,7 @@
   - block:
     - name: remove some more configuration
       nxos_snmp_host: &rem2
-        snmp_host: 3.3.3.3
+        snmp_host: 192.0.2.3
         vrf_filter: default
         state: absent
       register: result

test/integration/targets/nxos_snmp_host/tests/common/sanity_snmp_v3_trap.yaml

@@ -13,7 +13,7 @@
 
 - name: Setup - Remove snmp_host if configured
   nxos_snmp_host: &remove
-    snmp_host: 3.3.3.3
+    snmp_host: 192.0.2.3
     community: TESTING
     udp: 222
     v3: "{{ snmp_auth|default(omit) }}"
@@ -29,7 +29,7 @@
 
   - name: Configure snmp host 
     nxos_snmp_host: &config
-      snmp_host: 3.3.3.3
+      snmp_host: 192.0.2.3
       community: TESTING
       udp: 222
       v3: "{{ snmp_auth|default(omit) }}"
@@ -56,7 +56,7 @@
   - block:
     - name: Add another vrf to filter
       nxos_snmp_host: &config1
-        snmp_host: 3.3.3.3
+        snmp_host: 192.0.2.3
         udp: 222
         vrf_filter: default
         state: present 
@@ -73,7 +73,7 @@
 
   - name: remove some configuration
     nxos_snmp_host: &rem1
-      snmp_host: 3.3.3.3
+      snmp_host: 192.0.2.3
       udp: 222
       src_intf: "{{ intname|default(omit) }}"
       vrf: management
@@ -92,7 +92,7 @@
   - block:
     - name: remove some more configuration
       nxos_snmp_host: &rem2
-        snmp_host: 3.3.3.3
+        snmp_host: 192.0.2.3
         udp: 222
         vrf_filter: default
         state: absent

test/integration/targets/nxos_static_route/tests/common/sanity.yaml

@@ -7,7 +7,7 @@
   - name: create static route
     nxos_static_route: &configure
       prefix: "192.168.20.64/24"
-      next_hop: "3.3.3.3"
+      next_hop: "192.0.2.3"
       route_name: testing
       pref: 100
       tag: 5500
@@ -31,7 +31,7 @@
   - name: change static route
     nxos_static_route: &configure1
       prefix: "192.168.20.64/24"
-      next_hop: "3.3.3.3"
+      next_hop: "192.0.2.3"
       route_name: default
       pref: 10
       tag: default
@@ -51,7 +51,7 @@
   - name: remove static route
     nxos_static_route: &remove
       prefix: "192.168.20.64/24"
-      next_hop: "3.3.3.3"
+      next_hop: "192.0.2.3"
       route_name: testing
       pref: 100
       vrf: "{{ item }}"
@@ -71,8 +71,8 @@
   - name: configure static route(aggregate)
     nxos_static_route: &conf_agg
       aggregate:
-        - { prefix: "192.168.22.64/24", next_hop: "3.3.3.3" }
-        - { prefix: "192.168.24.64/24", next_hop: "3.3.3.3" }
+        - { prefix: "192.168.22.64/24", next_hop: "192.0.2.3" }
+        - { prefix: "192.168.24.64/24", next_hop: "192.0.2.3" }
     register: result
 
   - assert:
@@ -90,8 +90,8 @@
   - name: remove static route aggregate
     nxos_static_route: &remove_agg
       aggregate:
-        - { prefix: "192.168.22.64/24", next_hop: "3.3.3.3" }
-        - { prefix: "192.168.24.64/24", next_hop: "3.3.3.3" }
+        - { prefix: "192.168.22.64/24", next_hop: "192.0.2.3" }
+        - { prefix: "192.168.24.64/24", next_hop: "192.0.2.3" }
       state: absent
     register: result
 
@@ -111,7 +111,7 @@
   - name: remove static route
     nxos_static_route:
       prefix: "192.168.20.64/24"
-      next_hop: "3.3.3.3"
+      next_hop: "192.0.2.3"
       route_name: testing
       pref: 100
       tag: 5500
@@ -123,8 +123,8 @@
   - name: remove static route aggregate
     nxos_static_route:
       aggregate:
-        - { prefix: "192.168.22.64/24", next_hop: "3.3.3.3" }
-        - { prefix: "192.168.24.64/24", next_hop: "3.3.3.3" }
+        - { prefix: "192.168.22.64/24", next_hop: "192.0.2.3" }
+        - { prefix: "192.168.24.64/24", next_hop: "192.0.2.3" }
       state: absent
     ignore_errors: yes
 

test/integration/targets/nxos_system/tests/cli/set_name_servers.yaml

@@ -4,32 +4,32 @@
 - name: setup
   nxos_config: &reset
     lines:
-      - no ip name-server 1.1.1.1
-      - no ip name-server 2.2.2.2
-      - no ip name-server 3.3.3.3
+      - no ip name-server 192.0.2.1
+      - no ip name-server 192.0.2.2
+      - no ip name-server 192.0.2.3
     match: none
 
 - name: configure name_servers
   nxos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
   register: result
 
 - assert:
     that:
       - result.changed == true
-      - "'ip name-server 1.1.1.1' in result.commands"
-      - "'ip name-server 2.2.2.2' in result.commands"
-      - "'ip name-server 3.3.3.3' in result.commands"
+      - "'ip name-server 192.0.2.1' in result.commands"
+      - "'ip name-server 192.0.2.2' in result.commands"
+      - "'ip name-server 192.0.2.3' in result.commands"
 
 - name: verify name_servers
   nxos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
   register: result
 
 - assert:
@@ -39,24 +39,24 @@
 #- name: change to vrf
 #  nxos_system:
 #    name_servers:
-#      - 1.1.1.1
-#      - { server: 2.2.2.2, vrf: ansible }
-#      - 3.3.3.3
+#      - 192.0.2.1
+#      - { server: 192.0.2.2, vrf: ansible }
+#      - 192.0.2.3
 #  register: result
 
 #- assert:
 #    that:
 #      - result.changed == true
 #      - result.commands|length == 2
-#      - "'no ip name-server 2.2.2.2' in result.commands"
-#      - "'ip name-server 2.2.2.2 vrf ansible' in result.commands"
+#      - "'no ip name-server 192.0.2.2' in result.commands"
+#      - "'ip name-server 192.0.2.2 vrf ansible' in result.commands"
 
 #- name: verify change to vrf
 #  nxos_system:
 #    name_servers:
-#      - 1.1.1.1
-#      - { server: 2.2.2.2, vrf: ansible }
-#      - 3.3.3.3
+#      - 192.0.2.1
+#      - { server: 192.0.2.2, vrf: ansible }
+#      - 192.0.2.3
 #  register: result
 #
 #- assert:
@@ -66,15 +66,15 @@
 - name: remove one
   nxos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
+      - 192.0.2.1
+      - 192.0.2.2
   register: result
 
 - assert:
     that:
       - result.changed == true
       - result.commands|length == 1
-      - "'no ip name-server 3.3.3.3' in result.commands"
+      - "'no ip name-server 192.0.2.3' in result.commands"
 
 - name: default name server
   nxos_system: &defns

test/integration/targets/nxos_system/tests/nxapi/set_name_servers.yaml

@@ -11,31 +11,31 @@
     match: none
   ignore_errors: yes
   with_items:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
 
 - name: configure name_servers
   nxos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
   register: result
 
 - assert:
     that:
       - result.changed == true
-      - "'ip name-server 1.1.1.1' in result.commands"
-      - "'ip name-server 2.2.2.2' in result.commands"
-      - "'ip name-server 3.3.3.3' in result.commands"
+      - "'ip name-server 192.0.2.1' in result.commands"
+      - "'ip name-server 192.0.2.2' in result.commands"
+      - "'ip name-server 192.0.2.3' in result.commands"
 
 - name: verify name_servers
   nxos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
   register: result
 
 - assert:
@@ -45,24 +45,24 @@
 #- name: change to vrf
 #  nxos_system:
 #    name_servers:
-#      - 1.1.1.1
-#      - { server: 2.2.2.2, vrf: ansible }
-#      - 3.3.3.3
+#      - 192.0.2.1
+#      - { server: 192.0.2.2, vrf: ansible }
+#      - 192.0.2.3
 #  register: result
 
 #- assert:
 #    that:
 #      - result.changed == true
 #      - result.commands|length == 2
-#      - "'no ip name-server 2.2.2.2' in result.commands"
-#      - "'ip name-server 2.2.2.2 vrf ansible' in result.commands"
+#      - "'no ip name-server 192.0.2.2' in result.commands"
+#      - "'ip name-server 192.0.2.2 vrf ansible' in result.commands"
 
 #- name: verify change to vrf
 #  nxos_system:
 #    name_servers:
-#      - 1.1.1.1
-#      - { server: 2.2.2.2, vrf: ansible }
-#      - 3.3.3.3
+#      - 192.0.2.1
+#      - { server: 192.0.2.2, vrf: ansible }
+#      - 192.0.2.3
 #  register: result
 #
 #- assert:
@@ -72,15 +72,15 @@
 - name: remove one
   nxos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
+      - 192.0.2.1
+      - 192.0.2.2
   register: result
 
 - assert:
     that:
       - result.changed == true
       - result.commands|length == 1
-      - "'no ip name-server 3.3.3.3' in result.commands"
+      - "'no ip name-server 192.0.2.3' in result.commands"
 
 - name: default name server
   nxos_system: &defns
@@ -102,9 +102,9 @@
 - name: teardown
   nxos_config: *reset
   with_items:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
   ignore_errors: yes
 
 - debug: msg="END nxapi/set_name_servers.yaml"

test/integration/targets/nxos_vxlan_vtep_vni/tests/common/sanity.yaml

@@ -179,10 +179,10 @@
         interface: nve1
         vni: 8000
         peer_list: 
-          - 1.1.1.1
-          - 2.2.2.2
-          - 3.3.3.3
-          - 4.4.4.4
+          - 192.0.2.1
+          - 192.0.2.2
+          - 192.0.2.3
+          - 192.0.2.4
         ingress_replication: static
       register: result
   

test/integration/targets/vyos_system/tests/cli/basic.yaml

@@ -4,33 +4,33 @@
 - name: setup
   vyos_config:
     lines:
-      - delete system name-server 1.1.1.1
-      - delete system name-server 2.2.2.2
-      - delete system name-server 3.3.3.3
+      - delete system name-server 192.0.2.1
+      - delete system name-server 192.0.2.2
+      - delete system name-server 192.0.2.3
     match: none
 
 - name: configure name servers
   vyos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
   register: result
 
 - assert:
     that:
       - result.changed == true
       - result.commands|length == 3
-      - result.commands[0]  is search("set system name-server '1.1.1.1'")
-      - result.commands[1]  is search("set system name-server '2.2.2.2'")
-      - result.commands[2]  is search("set system name-server '3.3.3.3'")
+      - result.commands[0]  is search("set system name-server '192.0.2.1'")
+      - result.commands[1]  is search("set system name-server '192.0.2.2'")
+      - result.commands[2]  is search("set system name-server '192.0.2.3'")
 
 - name: verify name_servers
   vyos_system:
     name_servers:
-      - 1.1.1.1
-      - 2.2.2.2
-      - 3.3.3.3
+      - 192.0.2.1
+      - 192.0.2.2
+      - 192.0.2.3
   register: result
 
 - assert:
@@ -40,7 +40,7 @@
 - name: remove one
   vyos_system:
     name_servers:
-      - 3.3.3.3
+      - 192.0.2.3
     state: absent
   register: result
 
@@ -48,14 +48,14 @@
     that:
       - result.changed == true
       - result.commands|length == 1
-      - result.commands[0]  is search("delete system name-server '3.3.3.3'")
+      - result.commands[0]  is search("delete system name-server '192.0.2.3'")
 
 - name: teardown
   vyos_config:
     lines:
-      - delete system name-server name-server 1.1.1.1
-      - delete system name-server name-server 2.2.2.2
-      - delete system name-server name-server 3.3.3.3
+      - delete system name-server name-server 192.0.2.1
+      - delete system name-server name-server 192.0.2.2
+      - delete system name-server name-server 192.0.2.3
     match: none
 
 - debug: msg="END cli/basic.yaml on connection={{ ansible_connection }}"

test/integration/targets/vyos_system/tests/cli/net_system.yaml

@@ -7,24 +7,24 @@
 - name: setup
   vyos_config:
     lines:
-      - delete system name-server 1.1.1.1
+      - delete system name-server 192.0.2.1
     match: none
 
 - name: configure name servers using platform agnostic module
   net_system:
     name_servers:
-      - 1.1.1.1
+      - 192.0.2.1
   register: result
 
 - assert:
     that:
       - result.changed == true
-      - result.commands[0]  is search("set system name-server '1.1.1.1'")
+      - result.commands[0]  is search("set system name-server '192.0.2.1'")
 
 - name: setup
   vyos_config:
     lines:
-      - delete system name-server 1.1.1.1
+      - delete system name-server 192.0.2.1
     match: none
 
 - debug: msg="END vyos cli/net_system.yaml on connection={{ ansible_connection }}"

test/units/modules/network/dellos10/fixtures/show_running-config

@@ -2,9 +2,9 @@
 ! Last configuration change at Jan  11 12:26:08 2018
 !
 snmp-server contact http://www.dell.com/support
-snmp-server host 1.1.1.1 traps version 1 c4 udp-port 5
-snmp-server host 1.1.1.1 traps version 2c c1 udp-port 4
-snmp-server host 2.2.2.2 traps version 1 c3 udp-port 162
+snmp-server host 192.0.2.1 traps version 1 c4 udp-port 5
+snmp-server host 192.0.2.1 traps version 2c c1 udp-port 4
+snmp-server host 192.0.2.2 traps version 1 c3 udp-port 162
 ip community-list expanded commex deny aaa
 ip community-list standard commstd deny internet
 ip community-list standard commstd permit no-advertise

test/units/modules/network/dellos6/fixtures/show_ip_int

@@ -8,7 +8,7 @@ Interface    State   IP Address      IP Mask         Method
 Vl1          Down    0.0.0.0         0.0.0.0         None
 Vl2          Up      0.0.0.0         0.0.0.0         DHCP
 Vl99         Up      10.99.1.2       255.255.0.0     Manual
-Vl100        Up      3.3.3.3         255.255.255.0   Manual
+Vl100        Up      192.0.2.3       255.255.255.0   Manual
 Vl999        Up      10.250.1.2      255.255.255.0   Manual
 Vl1010       Up      10.1.1.1        255.255.255.0   Manual
 Vl1681       Up      192.168.100.1   255.255.255.0   Manual

test/units/modules/network/dellos6/fixtures/show_running-config

@@ -99,7 +99,7 @@ snmp-server enable traps captive-portal client-connect
 snmp-server enable traps captive-portal client-db-full
 snmp-server enable traps captive-portal client-disconnect
 router bgp 11
-bgp router-id 1.1.1.1
+bgp router-id 192.0.2.1
 maximum-paths 2
 maximum-paths ibgp 2
 network 101.1.2.0 mask 255.255.255.0

test/units/modules/network/ironware/fixtures/show_mpls_lsp_detail

@@ -1,4 +1,4 @@
-LSP LSP1, to 1.1.1.1
+LSP LSP1, to 192.0.2.1
   From: (n/a), admin: DOWN, status: DOWN
   revert timer: 300 seconds
   Times primary LSP goes up since enabled: 1
@@ -17,7 +17,7 @@ LSP LSP1, to 1.1.1.1
    Backup LSP: DOWN
    Global revertiveness enabled with hold time 5 secs
    FRR Forwarding State: Pri(down), Backup(down)
-LSP LSP3, to 3.3.3.3
+LSP LSP3, to 192.0.2.3
   From: (n/a), admin: DOWN, status: DOWN
   Times primary LSP goes up since enabled: 0
   Metric: 0

test/units/modules/network/ironware/fixtures/show_mpls_vll_detail

@@ -9,7 +9,7 @@ VLL TEST-VLL, VC-ID 111, VLL-INDEX 4
   COS              : 1
   Extended Counters: Enabled
 
-  Vll-Peer         : 1.1.1.1
+  Vll-Peer         : 192.0.2.1
     State          : DOWN - PW is Down (Reason:Wait for peer label)
     Remote VC type : --                Remote VC MTU  : --
     Local label    : --                Remote label   : --

test/units/modules/network/ironware/fixtures/show_mpls_vpls_detail

@@ -10,7 +10,7 @@ VPLS TEST-VPLS, Id 333, Max mac entries: 2048
    Untagged: ethe 2/7
  VC-Mode: Raw
  Total VPLS peers: 1 (0 Operational)
- Peer address: 3.3.3.3, State: Wait for functional local ports
+ Peer address: 192.0.2.3, State: Wait for functional local ports
   Tnnl in use: tnl1(3)[RSVP]    Peer Index:0
   Local VC lbl: N/A, Remote VC lbl: N/A
   Local VC MTU: 9190, Remote VC MTU: 0

test/units/modules/network/ironware/fixtures/show_running-config

@@ -43,14 +43,14 @@ qos-mapping
 default-max-frame-size 9216
 cpu-usage on
 aaa authentication login default tacacs+ local enable
-tacacs-server host 5.5.5.5
+tacacs-server host 192.0.2.5
 tacacs-server key 2 $X3FSZjgzKGzPIXVd
 !
 !
 enable password-display
 enable super-user-password 8 $1$WV1..Pi2$B6acbjDxeHsof2BKrpyqQ0
 enable aaa console
-logging host 5.5.5.5
+logging host 192.0.2.5
 logging facility local7
 logging buffered 5000
 logging console
@@ -244,13 +244,13 @@ router mpls
     cos 1
 
  lsp LSP1
-  to 1.1.1.1
+  to 192.0.2.1
   no cspf
   adaptive
   enable
 
  lsp LSP3
-  to 3.3.3.3
+  to 192.0.2.3
   shortcuts isis level2
   adaptive
   reoptimize-timer 1800
@@ -260,7 +260,7 @@ router mpls
   enable
 
  vll TEST-VLL 111 raw-mode cos 1
-  vll-peer 1.1.1.1
+  vll-peer 192.0.2.1
   vlan 2005
    tagged e 2/1
 
@@ -271,7 +271,7 @@ router mpls
    tag e 2/9
 
  vpls TEST-VPLS 333
-  vpls-peer 3.3.3.3
+  vpls-peer 192.0.2.3
   vlan 5
    untagged ethe 2/4
   vlan 6

test/units/modules/network/netscaler/test_netscaler_cs_action.py

@@ -72,7 +72,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         self.nitro_base_patcher.stop()
@@ -86,7 +86,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -112,7 +112,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -136,7 +136,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -163,7 +163,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -190,7 +190,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -216,7 +216,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -244,7 +244,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
             save_config=False,
         ))
@@ -271,7 +271,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -303,7 +303,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -337,7 +337,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -371,7 +371,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -405,7 +405,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -439,7 +439,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -475,7 +475,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -511,7 +511,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -547,7 +547,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -583,7 +583,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action
@@ -611,7 +611,7 @@ class TestNetscalerCSActionModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_action

test/units/modules/network/netscaler/test_netscaler_cs_policy.py

@@ -54,7 +54,7 @@ class TestNetscalerCSPolicyModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state=state,
         ))
 

test/units/modules/network/netscaler/test_netscaler_cs_vserver.py

@@ -79,7 +79,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         self.nitro_base_patcher.stop()
@@ -93,7 +93,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -119,7 +119,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -143,7 +143,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -170,7 +170,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -200,7 +200,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -226,7 +226,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -257,7 +257,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
             save_config=False,
         ))
@@ -284,7 +284,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -318,7 +318,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -354,7 +354,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -388,7 +388,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -423,7 +423,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -457,7 +457,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -494,7 +494,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -531,7 +531,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -567,7 +567,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -603,7 +603,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -631,7 +631,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver
@@ -659,7 +659,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
 
@@ -687,7 +687,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             servicetype='SSL',
         ))
@@ -728,7 +728,7 @@ class TestNetscalerCSVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_cs_vserver

test/units/modules/network/netscaler/test_netscaler_gslb_service.py

@@ -80,7 +80,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         self.nitro_base_patcher.stop()
@@ -94,7 +94,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -120,7 +120,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -144,7 +144,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -172,7 +172,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -199,7 +199,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -228,7 +228,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -256,7 +256,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -286,7 +286,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
             save_config=False,
         ))
@@ -315,7 +315,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -349,7 +349,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -386,7 +386,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -421,7 +421,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -457,7 +457,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -493,7 +493,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -531,7 +531,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -569,7 +569,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -606,7 +606,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -643,7 +643,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -680,7 +680,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service
@@ -709,7 +709,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_service

test/units/modules/network/netscaler/test_netscaler_gslb_site.py

@@ -70,7 +70,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         self.nitro_base_patcher.stop()
@@ -84,7 +84,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -110,7 +110,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -134,7 +134,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -161,7 +161,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -187,7 +187,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -215,7 +215,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -242,7 +242,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -271,7 +271,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
             save_config=False,
         ))
@@ -299,7 +299,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -332,7 +332,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -367,7 +367,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -401,7 +401,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -436,7 +436,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -471,7 +471,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -507,7 +507,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -543,7 +543,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -579,7 +579,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -615,7 +615,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site
@@ -643,7 +643,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_site

test/units/modules/network/netscaler/test_netscaler_gslb_vserver.py

@@ -74,7 +74,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         self.nitro_base_patcher.stop()
@@ -88,7 +88,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -114,7 +114,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -138,7 +138,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -165,7 +165,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -192,7 +192,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -221,7 +221,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -248,7 +248,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -278,7 +278,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
             save_config=False,
         ))
@@ -306,7 +306,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -340,7 +340,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -378,7 +378,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -412,7 +412,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -448,7 +448,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -486,7 +486,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -524,7 +524,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -559,7 +559,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -596,7 +596,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -633,7 +633,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -669,7 +669,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -705,7 +705,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver
@@ -733,7 +733,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_gslb_vserver

test/units/modules/network/netscaler/test_netscaler_lb_monitor.py

@@ -70,7 +70,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         self.nitro_base_patcher.stop()
@@ -84,7 +84,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_monitor
@@ -113,7 +113,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_monitor
@@ -135,7 +135,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_monitor
@@ -160,7 +160,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_monitor
@@ -186,7 +186,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_monitor
@@ -212,7 +212,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -239,7 +239,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
             save_config=False,
         ))
@@ -266,7 +266,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -294,7 +294,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -332,7 +332,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -358,7 +358,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -386,7 +386,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_monitor
@@ -412,7 +412,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_monitor
@@ -440,7 +440,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_monitor
@@ -464,7 +464,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_monitor
@@ -489,7 +489,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
 

test/units/modules/network/netscaler/test_netscaler_lb_vserver.py

@@ -78,7 +78,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         self.nitro_base_patcher.stop()
@@ -92,7 +92,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_vserver
@@ -118,7 +118,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_vserver
@@ -140,7 +140,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_vserver
@@ -166,7 +166,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_vserver
@@ -193,7 +193,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_vserver
@@ -220,7 +220,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -248,7 +248,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
             save_config=False,
         ))
@@ -276,7 +276,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -307,7 +307,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -347,7 +347,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -376,7 +376,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -406,7 +406,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -456,7 +456,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -506,7 +506,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
             servicetype='SSL',
@@ -542,7 +542,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
             servicetype='HTTP',
@@ -577,7 +577,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_vserver
@@ -609,7 +609,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_vserver
@@ -642,7 +642,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_vserver
@@ -673,7 +673,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_vserver
@@ -704,7 +704,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_vserver
@@ -735,7 +735,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_vserver
@@ -759,7 +759,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_lb_vserver
@@ -784,7 +784,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
 
@@ -811,7 +811,7 @@ class TestNetscalerLBVServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
 

test/units/modules/network/netscaler/test_netscaler_save_config.py

@@ -54,7 +54,7 @@ class TestNetscalerSaveConfigModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
         ))
         from ansible.modules.network.netscaler import netscaler_save_config
 
@@ -79,7 +79,7 @@ class TestNetscalerSaveConfigModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
         ))
         from ansible.modules.network.netscaler import netscaler_save_config
 
@@ -102,7 +102,7 @@ class TestNetscalerSaveConfigModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
         ))
         from ansible.modules.network.netscaler import netscaler_save_config
 
@@ -128,7 +128,7 @@ class TestNetscalerSaveConfigModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
         ))
 
         class MockException(Exception):

test/units/modules/network/netscaler/test_netscaler_server.py

@@ -70,7 +70,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         self.nitro_base_patcher.stop()
@@ -84,7 +84,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -110,7 +110,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -134,7 +134,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -161,7 +161,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -188,7 +188,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -215,7 +215,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             save_config=False,
         ))
@@ -243,7 +243,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
             save_config=False,
         ))
@@ -270,7 +270,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -298,7 +298,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
             disabled=True,
             graceful=True
@@ -333,7 +333,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -365,7 +365,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -399,7 +399,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -433,7 +433,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -467,7 +467,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -501,7 +501,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -537,7 +537,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -573,7 +573,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -609,7 +609,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -645,7 +645,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='present',
         ))
         from ansible.modules.network.netscaler import netscaler_server
@@ -672,7 +672,7 @@ class TestNetscalerServerModule(TestModule):
         set_module_args(dict(
             nitro_user='user',
             nitro_pass='pass',
-            nsip='1.1.1.1',
+            nsip='192.0.2.1',
             state='absent',
         ))
         from ansible.modules.network.netscaler import netscaler_server