* Provide a way to explicitly invoke the debugger with in the debug strategy
* Merge the debugger strategy into StrategyBase
* Fix some logic, pin to a single result
* Make redo also continue
* Make sure that if the debug closure doesn't need to process the result, that we still return it
* Fix failing tests for the strategy
* Clean up messages from debugger and exit code to match bin/ansible
* Move the FieldAttribute higher, to apply at different levels
* make debugger a string, expand logic
* Better host state rollbacks
* More explicit debugger prompt
* ENABLE_TASK_DEBUGGER should be boolean, and better docs
* No bare except, add pprint, alias h, vars to task_vars
* _validate_debugger can ignore non-string, that can be caught later
* Address issue if there were no previous tasks/state, and use the correct key
* Update docs for changes to the debugger
* Guard against a stat going negative through use of decrement
* Add a few notes about using the debugger on the free strategy
* Add changelog entry for task debugger
* Add a few versionadded indicators and a note about vars -> task_vars
* Add test for unexpected egress rule in default VPC
When passing rules_egress to ec2_group, the default
egress rule shouldn't be created (if `purge_rules_egress`)
is set. Test this.
* Respect egress rule defintions for default VPC groups
When passing rules_egress and purge_rules_egress, the
default egress rule should not be created
Fixes#34429
* Change AWS credential passing to be YAML anchors
Vastly simplify the AWS tasks by reducing the credentials to a YAML
block
This fix adds rpm.error exception which is raised when
API unable to get envra information from RPM package.
Also, adds integration test for local_envra method.
Fixes: #30074
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix connection type in junos integration tests
* For find module in junos integration test
add connection type local and delegate task to localhost
* Fix review comment
* Add some integration tests for ec2_asg.
* Remove exception handling from ec2_asg boto3 connection since it is handled in boto3_conn().
* Update test failure assertions
* Use yaml anchor for credentials and remove unnecessary dependencies.
* Move AWS boto3 module credentials tests to separate target
* Remove filters from tests
* Add new module mlnxos_protocol for enabling disabling protocols on
MLNX-OS Mellanox network devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix Test Class name
* Fix IP routing protocol support
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add missing support for check_mode, and Fix documentation
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add connection=netconf in individual roles for modules that run using netconf connection
plugin
* Add connection=network_cli for junos_netconf and junos_command
at applicable places
* cs_network_offering: streamline docs a bit
* cs_network_offering: format traffic type as returned by API
* cs_network_offering: rename return to service_offering_id
* cs_network_offering: ensure absent tests don't require anyting else than name
* cs_network_offering: beautify the default_egress_policy param
* cs_network_offering: test enabling/disabling with existing syntax
* cs_network_offering: rename service_provider_list to service_providers
* cs_network_offering: allow update max_connections
* cs_network_offering: extend returns
* cs_network_offering: extend tests with max_connections
* cloudstack: rename cs_serviceoffer to cs_service_offering
* adjust references to old name
* cs_service_offering: fix limitcpuuse not handled
* minor docs fix
* update changelog
A bug in the parsing of single commands with commas
Token cleanup
Password argument now defaults to false
Addition of coding conventions from v3 conventions
This module can be used to add license offerings to a pool. This
is the second part required to license a remote device from a
BIG-IQ (the first being to create a pool with bigiq_regkey_pool)
* Don't use getattr in _get_parent_attribute to avoid recursion issues
Fixes#23609
* Move extend/prepend to field attribute
Also removes _get_attr* methods that were basically just calling
_get_parent_attribute because it needed to set those params.
Also modifies _get_parent_attribute() to pull those values from the
FieldAttributes instead of using the ones passed into the function.
* Better fixes for _get_parent_attribute
* Removes deprecated code from bigip_monitor_tcp
The deprecated code was moved into its own modules. We let it lay
here for a release, and now I'm removing it.
* Fixing upstreaming tests
This module can be used to create GTM servers (not to be confused with
GTM virtual servers) on a BIGIP. GTM servers are a component of the
datacenter, and GTM virtual servers are their members.
* basic.py: add mock to os.path.exists
* set_*_if_different: if check_mode enabled & file missing: set changed to True
Fixes#32676
Thanks to mscherer and Spredzy for the distributed triplet programming
session!
* galaxy unit tests: add missing program name
* galaxy unit tests: remove incorrect switchs
- 'install' action doesn't support '--offline' switch
- 'remove' action doesn't support '--init-path' switch
* Add integration test for missing attempts in until with failed/changed_when
* Extend tests to validate additional known behaviors of do-until loops
* Inject attempts into result earlier
This fix adds new module for managing various roles in
local ESXi server. Also, adds integration tests for this change.
Fixes: #27899
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Code refactor to use f5 coding conventions. Removed deprecated
"enabled/disabled" params (this is now a state). Adds token cleanup
for cases where many api calls are made.
This refactors the bigip_virtual_server module to address several issues and
missing features. Additionally it adds tests and updates the coding standards
to the recent version used by f5. Finally, it removes deprecated items that
were announced in 2.4
* Readd zypper tests
The tests were reenabled in #33034, but some tests were removed.
Readd the tests in a mostly distro-version-independent way.
* Remove with_items and use native yaml
* Dynamically determine test URL
This fix adds support for Virtual Machine resource allocation
information. This information is related to limit and reserve CPU and Memory
of virtual machine.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* mutually_exclusive add - ios_config parents works with lines by not src
* mutually_execlusive parents,src added to all other net modules
* tests for mutually_exclusive parents,src and whitespce removal
* obscure type promotion issue in some versions of Powershell causes [int]::MaxValue to be promoted to [int64] when doing a COM property get or set. Since the "All" profiles value of 0x7FFFFFFF is [int]::MaxValue, it would trigger "Specified cast is not valid" when modifying a rule that's already set to All Profiles or trying to be.
* Fixed catch-all error handler to include exception detail
* Added test converage for this case
* Begin rewrite of win_iis_webbinding
Add integration testing, check mode and idempotency
Add support for SNI
Fix replacing SSL cert on existing bindings
* finished up initial rewrite of win_iis_webbinding
* updated test to remove tests as filters
* updated win_iis_webbinding docs
* fix more doc/formatting issues win_iis_webbinding
* Removed string empty defaults for certs. Added a few new helpful
comments.
* Revert "Removed string empty defaults for certs. Added a few new helpful"
This reverts commit 48f35faea8.
* Add module mlnxos_linkagg for configuring LAG and MLAG on Mellanox
switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Remove unnecessary method in unit-test
remove _execute_module and use execute_module from base class
* Add eos_interface module
* Implementation of eos_interface module
* Intergration test for eos_interface module
* Minor fix in eos_l3_interface module
* Minor fix in ios_interface integration test
* Fix CI issues
* Fix more CI issues
* update version parsing and move requirements to nso_* modules
prepare for introduction of nso_show module that has other version
requirements than the existing nso_* modules.
* Add nso_show module for retreiving config from Cisco NSO
New module that supports getting configuration and operational data
from Cisco NSO.
Shell is implemented via the command module. There was a special case
in mod_args to do that. Make shell into an action plugin to handle that
instead.
Also move the special case for the command nanny into a command module
action plugin. This is more appropriate as we then do not have to send
a parameter that is only for the command module to every single module.
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* WWNN/WWPN Pools and integration test
* option description spelled out (aliased to descr)
removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* VSANs module and integration test
* removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* vHBA templates and integration test
* option description spelled out (aliased to descr)
removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* SAN Connectivity Policies only
* option description spelled out (aliased to descr)
removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* Resolve newly added tests as filters
* Add code smell to test for ansible provided jinja tests as filters syntax
* Add docs for no-tests-as-filters code smell test
* Address tests as filters in new integration tests
* Address feedback
* Address feedback 2
* disk can be mounted to vm
* add version added
* fix lint
* Fix some mirrors
* fix lint
* remove trailing space
* fix as review comment
* fix yaml
* fix
* fix
* Minor update to doc on unmounting disk from VM
* WIP adds network subnetting functions
* adds functions to convert between netmask and masklen
* adds functions to verify netmask and masklen
* adds function to dtermine network and subnet from address / mask pair
* network_common: add a function to get the first 48 bits in a IPv6 address.
ec2_group: only use network bits of a CIDR.
* Add tests for CIDRs with host bits set.
* ec2_group: add warning if CIDR isn't the networking address.
* Fix pep8.
* Improve wording.
* fix import for network utils
* Update tests to use pytest instead of unittest
* add test for to_ipv6_network()
* Fix PEP8
* Update task definitions for network_cli
* Add connection to debug messages
* Specify connection for prepare task
* pc won't be around for connection=network_cli
* Assorted Python 3 fixes
* Give default port if ansible_ssh_port missing
* delegate -> connection
* Extend error regex
* Added module new win_disk_facts
* Corrected examples section
* Added integration tests
* Added some disk properties
* Removed whitspaces
* Extended docu
* Changed header
* Added partition, volume and physical disk output
* Removed MediaType property of phys. disk
* Added return values
Added virtual disk, volume and physical disk output
* Added docu for return values
* Removed whitespaces
* Improved and added values
- Added virtual disk return values
- Improved code
* Updated docu
* Removed whitespaces
* Removed check
* Improved code and docu
* Changed integration test
* Changed integration test
* Changed integration test
* Changed integration test
* corrected typo
* Added admin test because CIM is not available with user rights
* Changed unit prefix from decimal to binary
This fix check if DNS4 is None or not before proceeding with
other operations. Also, added unit test for this change.
Signed-off-by: Fedor Sumkin <qosys.net@gmail.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add eos and fix tests to run multiple connections
* Update tests to report connection
* Add missing START messages
* Fix unspecified connection
* Python 3 updates
Exceptions don't have `.message` in Python 3
* Override `become` when using `connection=local`
* Slight restructuring to make eapi easier later on
* Move eapi toggle to prepare_eos
* Pull out connection on eapi tasks
Split the one monolithic test for basic.py into several files
* Split test_basic.py along categories.
This is preliminary to get a handle on things. Eventually we may want
to further split it so each file is only testing a single function.
* Cleanup unused imports from splitting test_basic.py
* Port atomic_move test to pytest.
Working on getting rid of need to maintain procenv
* Split a test of symbolic_mode_to_octal to follow unittest best practices
Each test should only invoke the function under test once
* Port test_argument_spec to pytest.
* Fix suboptions failure
Currently when we make up the return value, we take values based of the
parameters rather than the generated openssl_certificate itself.
This commits returns the actual certificate values making it all time
accurate.
* Update validation test for new copyright
Ensure new modules without the new copyright header fail
validation
Ensure existing modules without copyright in top 20 lines fail
* Add documentation of 108 error
Create label in developing modules documentation so that
the validation page can point to it
* Ensure new style copyright header passes test!
* add nxos_aaa_server IT
* add nxos_aaa_server_host ITs
* Add nxos_gir IT
* Add nxos_gir_profile_management IT
* add newly added tests to nxos.yaml
* fix nxos.yaml indentation
* fix indentation again
* skip nxos_git_profile_management IT for titanium
* change idempotency to non-idempotency check
https://docs.python.org/2/library/stdtypes.html#str.split
str.split([sep[, maxsplit]])
If sep is given, consecutive delimiters are not grouped together and are deemed
to delimit empty strings.
>>> "85563 ----------------C-- /var/lib/libvirt/images".split(' ')[0:2]
['85563', '']
>>> "85563 ----------------C-- /var/lib/libvirt/images".split()[0:2]
['85563', '----------------C--']
Tests for:
* ecs_cluster
* ecs_service
* ecs_service_facts
* ecs_taskdefinition
* ecs_taskdefinition_facts
* Add idempotency testing
Test ecs_cluster, ecs_service and ecs_taskdefinition for trivial
idempotency. Add FIXMEs to the tests because the latter two fail.
Remove unused dependencies
This fix check for ESXi server instance before proceeding
with managing local user. Also, adds integration tests for
this change.
Fixes: #32465
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Port ec2_vpc_net to boto3 and add support to expand existing VPCs
* Add s-hertel as an author for ec2_vpc_net
* Update ec2_vpc_net test for new error triggered by lack of credentials
Fix backwards compatibility
Document new return value
* Fix pep8 and return documentation
* new package_facts module
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* remove package_facts pkg manager aliases, they are misleading
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* fix package_facts tests now that aliases are dropped
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* Initial commit for UcsConnection and ucs_macpool module.
Configures MAC address pools on UCS Manager.
* ansible-doc fixes
* PEP8 fixes
* pep8, pylint, and validate-modules fixes
* Correct indent issue introduced during pycodestyle cleanup
* Simplified module arugment setup.
Placed all code in main to avoid multiple calls and arg passing.
* module_utils/ucs changed to UCSModule which now handles login/logout directly
login_handle removed from module.params
doc updates on mac_list params and change to first_addr/last_addr for mac blocks
checking of all mac params
* Move module_utils to remote_management/ucs
Fix validate-modules issue with docs
* UCS MAC pool integration tests
Fixed issues with MAC pool descr and address range params
* Fixing aruba's inconsitent indenting.
* Adding config with different children indentation and unit test to confirm the different spacing does not matter.
* Fixing pylint check. Missed an r prefix.
junos integration test fails intermittently after task enables netconf
on the remote host and the second task tries to create a persistent
connection. Add a delay after the first task to ensure netconf is up
running on remote host.
* When inserting a new rule in `insert_after_rule`, check if the old rule is
the last rule, to avoid a list index out of range error when attempting to
access the next rule.
* Add a test for inserting a new rule after the last rule.
Allow CamelCase version of snake_dict_to_camel_dict
(currently only dromedaryCase is supported)
Add reversible option to camel_dict_to_snake_dict
Add tests for both of these options
* Fix vyos on network_cli on python3
bytes do not have format() in Python3
* Push connection to tasks, with bonus connection=local test
* Run tests without explicit connection set
* Add/update START messages where appropriate
* vmware_host: add reconnect and add_or_reconnect states
Add "reconnect" and "add_or_reconnect" choices for "state".
* reconnect: reconnect an esxi to a vcenter (imply it is present).
* add_or_reconnect: do the same but add the esxi if absent.
Also:
* tag the cluster_name as required (because it is).
* tag esxi_username and esxi_password as not required because
they aren't when the esxi isn't added.
* vmware_host: add + prepare/document integration tests
vmware_host module
Add integration test for the add part of "add_or_reconnect" state.
Prepare and document integration tests for the reconnect part
of "add_or_reconnect" state and "reconnect" and "absent" states.
Currently we can't test those states as ReconnectHost_Task (for
"reconnect") and EnterMaintenanceMode_Task (for "absent") aren't
implemented yet in vcsim (from vmware/govmomi)
* TestPlaybookCLI: '--flush-cache' were ignored
Check that using '--flush-cache' does something
* check that '_flush_cache' does something
There isn't any fact by default: the assertion was true even if
'cli._flush_cache()' isn't called.
* Fixing save so it still works. Adding changed as an option for save_when.
* Updating unit tests.
* Updating description to state that changed was added in 2.5.
* Added new module: Azure RM SQL Servers
* fixed sanity issues
* enabled integration test
* disabling test as Microsoft.Sql namespace not available
* renamed servers -> server
* updates as requested in the review
* udpates to sql server
* renamed module
* replaced has_key by in
* flattened results
* final updates to sql server
* updates as requested in the review
* added more tests
* deleting unexisting instance up front
* more tests
* another round of test changes
* removed uneeded test
* Change cast_list_to_dict to more generic rekey_on_member
cast_list_to_dict was taking an arbitrary data format in and returning
an arbitrary data format out. Rework this to be a more generic function
which creates a dict of dicts based on a member of the dict.
Remove cast_dict_to_list since rekey_on_member handles the use cases we
know about and cast_dict_to_list suffers from the same problems as
cast_list_to_dict. If this is still needed we could think about filters
we could add to do this in a short jinja2 pipeline.
* Fix bare excepts (bare excepts even catch sys.exit())
* allow multiple values per key in name fields in openssl_certificate
* check correct side of comparison
* trigger only on lists
* add subject parameter to openssl_csr
* fix key: value mapping not skipping None elements
* temporary fix for undefined "subject" field
* fix iteration over subject entries
* fix docs
* quote sample string
* allow csr with only subject defined
* fix integration test
* look up NIDs before comparing, add hidden _strict params
* deal with empty issuer/subject fields
* adapt integration tests
* also normalize output from pyopenssl
* fix issue with _sanitize_inputs
* don't convert empty lists
* workaround for pyopenssl limitations
* properly encode the input to the txt2nid function
* another to_bytes fix
* make subject, commonname and subjecAltName completely optional
* don't compare hashes of keys in openssl_csr integration tests
* add integration test for old API in openssl_csr
* compare keys directly in certificate and publickey integration tests
* fix typo
* ACI Encap Pool: Add new module to support VLAN, VXLAN, and VSAN Pools
* update logic for allocation_mode
* update docstring and tests
* Update filter_target since url method has been updated
* Fix _clean_result for debug callback with 1 char var names
The check in _clean_results was removing any keys that happened
to be one of the chars in ('invocation') instead of the string
'invocation'. This was meant to be a tuple but there was no comma
so the for iterated the string instead of the tuple.
Introduced in 9dba580204
Update unit test to catch this.
Fixes#33723
* Use .pop() to remove invocation from results dict
In base callback _clean_results, simplify the way the
'invocation' item is removed.
Add some more unit tests.
* Deprecate Entity, EntityCollection and use subspec in network modules
* As per proposal https://github.com/ansible/proposals/issues/76
deprecate use of Entity, EntityCollection, ComplexDict, ComplexList
and use subspec instead.
* Refactor ios modules
* Refactor eos modules
* Refactor vyos modules
* Refactor nxos modules
* Refactor iosxr modules
* Add support for key in suboptions handling
* Fix CI issues
* Refactor cloudscale API code
Move code common to all cloudscale cloud modules into a common base
class.
This is needed as a prepartion of the cloudscale_floating_ip module.
* cloudscale_floating_ip module
New cloud module to manage floating IPs on the cloudscale.ch IaaS
service.
Fix a bunch of things mentioned in the review.
Delete commented code from module. Add fix for vcsim not returning
uncommitted.
Add integration test.
Add changes suggested
* Bulk pep8 fixes - hand crafted
Fix by hand the remaining issues that autopep8 couldn't
* Next batch of hand crafted pep8 fixes
* Ignore W503
https://github.com/PyCQA/pycodestyle/pull/499
* Revert more of W503
* add acr
* acr
* acr
* fix a minor error
* add tests and fixes as suggested
* use get_mgmt_svc_client to enable bi
* fixes as zim suggested
* code refinement
* get acr instance before update
* fix a bug
* remove Classic sku as it's going to deprecate
* pass sanity test
* fix sanity
* fixes based on comments
* fix broken namespace unregistered error
* fix a bug
* fix a bug
* fix
* add register namespace
* fixes tests
* remove pdb
* add ci azure test
* removed required: false
* renamed acr -> containerregistry
* fixed spelling mistake
* fixed idempotence
* fix for idempotence was wrong
* fixed a few issues
* different log when exception different than ResourceNotFound
* self.fail instead of log
* updated sample return value
* added login server in results
* fixed else
* fixed line too long
* cmp -> __ne__
* fixed trailing whitespace
* output.changed is false when instance updated
* fix for state change
* one more update
* update instance only when location or sku has changed
* fixed syntax error
* fixed acr test
* just removed unnecessary comment to trigger ci
* update return value shape
* flatten `state`
* change credential dictionary state
* add credentials to integration tests
* fixed: win_copy: typo "file file" (double "file")
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
* Add quotes around filenames/directories
* Fix tests for new quotes
* Fix tests for new quotes
* One more ?
* Another one...
* - Netconf plugin addition for iosxr
- Utilities refactoring to support netconf and cliconf
- iosx_banner refactoring for netconf and cliconf
- Integration testcases changes to accomodate above changes
* Fix sanity failures, shippable errors and review comments
* fix pep8 issue
* changes run_command method to send specific command args
* - Review comment fixes
- iosxr_command changes to remove ComplexDict based command_spec
* - Move namespaces removal method from utils to netconf plugin
* Minor refactoring in utils and change in deprecation message
* rewrite build_xml logic and import changes for new utils dir structure
* - Review comment changes and minor changes to documentation
* * refactor common code and docs updates
In case of workflow delete action, the returned 404 status code
considered as invalid although it's a valid code for not found (deleted)
entity.
Removed verification of the status. Only success should be verified.
Fixes#33524
* Fix typo in net_logging/eos
* This seems to be required to use eos_user in this way
* Fix indentation in net_static_route/eos
* Rework interface check in eos_vrf
This should do the right thing.
* Add some integration tests for ec2_vpc_net module
* Add a couple tests for check mode
fix typo
ensure the DHCP option set is cleaned up
* Add permissions to test policy
* Porting tests to pytest
* Achievement Get: No longer need mock/generator.py
* Now done via pytest's parametrization
* Port safe_eval to pytest
* Port text tests to pytest
* Port test_set_mode_if_different to pytest
* Change conftest AnsibleModule fixtures to be more flexible
* Move the AnsibleModules fixtures to module_utils/conftest.py for sharing
* Testing the argspec code requires:
* injecting both the argspec and the arguments.
* Patching the arguments into sys.stdin at a different level
* More porting to obsolete mock/procenv.py
* Port run_command to pytest
* Port known_hosts tests to pytest
* Port safe_eval to pytest
* Port test_distribution_version.py to pytest
* Port test_log to pytest
* Port test__log_invocation to pytest
* Remove unneeded import of procenv in test_postgresql
* Port test_pip to pytest style
* As part of this, create a pytest ansiblemodule fixture in
modules/conftest.py. This is slightly different than the
approach taken in module_utils because here we need to override the
AnsibleModule that the modules will inherit from instead of one that
we're instantiating ourselves.
* Fixup usage of parametrization in test_deprecate_warn
* Check that the pip module failed in our test
* Integration tests for zabbix_host using Zabbix on Ubuntu 14.04.
* fix duplicate yaml key in test
* .changed -> is changed, |failed -> is failed, trim configfile
* zabbix_host integration test does not need BOTMETA entry, inherited from module
This fix adds functionality to configure vmware guest parameter called
'maxMkconnections'. Also, added integration test for this change.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This fix adds functionality to support memory_reservation and
memory_reservation_lock while managing Virtual Machine.
Fixes: #20407
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix azure_rm_acs due to Azure breaking API change
* resolve code review feedbacks
* resolve test failures
* better name
* ignore case for vm size
* reformat code
* resolve code review feedbacks
* new windows module win_audit_policy_system
* removed the backup/restore functionality
adjusted to use run-command rather than running the command directly
adjusted testing appropriately for the above changes
* fixed issue with variable naming in testing
removed .psm1 from requires
fixed copyright
* Updated audit_type to list and added appropriate error handling
Updated testing accordingly
Fixed up documentation
* Refactor common network shared and platform specific code into package (part-1)
As per proposal #76 refactor common network shared and platform specific
code into sub-package.
https://github.com/ansible/proposals/issues/76
* ansible.module_utils.network.common - command shared functions
* ansible.module_utils.network.{{ platform }} - where platform is platform specific shared functions
* Fix review comments
* Fix review comments
* Refactors bigip_node
Includes a number of fixes and enhancements in addition to refactoring
the code to be inline with f5 standards
* Fixes upstream errors
* Adds bigip_policy_rule module
This module is the second component of managing LTM policies on
BIG-IP. This module lets you manage the rules of a policy
* Fixing upstream errors
* Correcting YAML errors
* Fixes and features for bigip_provision
Adds support for dedicated modules. Fixes bug in minimum name.
Adds wrappers around checking for up-ness so that they will contribute
to the watch loop
* Fixes upstream errors
This fix makes name and folder as required together
parameters in vmware_guest_snapshot.
Update integration tests for vmware_guest_snapshot.
Fixes: #22644
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Fix adds esxi_hostname as Ansible module argument for user
to define ESXi hostname to deploy VMware vSwitch.
Fixes: #24647
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Empty __init__ will allow us to use python namespaces with all of these
files. That may be something we want to take advantage of for allowign
them to be expanded by user dirs. Also might be needed for AnsiballZ or
other wrapper enhancements in the future.
* Added . and / to rule args regexp
Things like pam_echo.so file=/etc/foo.txt weren't being matched and
causing incorrect change counts. Adding / and . fixed that.
Fixes#33351
* pamd: test argument with value
Relates #33351
Fixes#33406Fixes#33405
* Fix typo in network_cli for sendonly
* Send `abort` to remote device in case configuration fails
* Fix indentation issue in eos_static_route integration test
* Revert network_cli change
This fix adds support for hardware parameter 'numCoresPerSocket'
in vmware_guest module. Also, adds integration tests for this change.
Fixes: #20406
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Adding module enos_config and its UT files
* Removing trailing line
* Removing trailing lines
* Editing enos_module.py to fix build errors
* Removing blank lines in end
* Updating enos_config.py based on review comments
* Adding one more blank line
* Removing training white space
* Removing test_enos_config_force method from UT
* Updating documentation
* Comments by John, Remove version_added: "2.5"
* Add netscaler_nitro_request module
* Make changes as requested.
* Fix whitepsace in EXAMPLES block.
* Set module changed status according to operation performed.
* Added support to Datacenter resources in HPE OneView
* Adjusting comments in oneview_datacenter_facts
* Adding no_log on the documentation
* Using Pytest to Oneview DatacenterFactsModule tests
Currently the check() method for idempotence only assumes the public
key is under the form of a PEM file when its not always the case.
The module openssl_publickey allows one to generate OpenSSH format
publickey. This leads to idempotence not being detected.
* Warn on tests used as filters
* Update docs, add aliases for tests that fit more gramatically with test syntax
* Fix rst formatting
* Add successful filter, alias of success
* Remove renamed_deprecation, it was overkill
* Make directory alias for is_dir
* Update tests to use proper jinja test syntax
* Update additional documentation, living outside of YAML files, to reflect proper jinja test syntax
* Add conversion script, porting guide updates, and changelog updates
* Update newly added uses of tests as filters
* No underscore variable
* Convert recent tests as filter changes to win_stat
* Fix some changes related to rebasing a few integration tests
* Make tests_as_filters_warning explicitly accept the name of the test, instead of inferring the name
* Add test for tests_as_filters_warning
* Update tests as filters in newly added/modified tests
* Address recent changes to several integration tests
* Address recent changes in cs_vpc
Currently during the check phase, the code considers the file to be
a public key if the file exist - which is not necessarily true.
This commits aims to ensure that the file is actually a publickey else
returns false for the check.
* add type manipulation
* update for py3
* add tests for list to dict
* Add dict to list tests
* Update tests to search for regex in response
* pep8 clean up
* update Exception for py3
* update test to be py2/3 compat
* update for py26 compat
* potential fix for py3 and py26
* potential fix for py3 and py26 take2
* add new line to kick off shippable
* remove cache file created
* fix filter name
* add space for shipable
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
Fix CI failure
Fix unit test failure
Fix review comments
* add availability set for vm
* add test
* add import
* fix
* add test assert and output
* fix lint and version added
* add null check
* fix mirror
* fix mirror
* Adding aliases for field attributes and renaming async attribute
As of Python 3.7, the use of async raises an error, whereas before the use
of the reserved word was ignored. This adds an alias field for field attrs
so that both async and async_val (interally) work. This allows us to be
backwards-compatible with 3rd party plugins that may still reference Task.async,
but for the core engine to work on Py3.7+.
* Remove files fixed for 'async' usage from the python 3.7 skip list
* Allow the user to circumvent adding -tt on ssh commands to help aid in
debugging ssh related problems.
* Move config to the plugin
* Set version_added
* Change yaml section to "connection"
* Fix ssh unit tests
* Improve error message in cloudscale_server module
Fix punctuation and add the full contents of "info" to the output in
case of failed API calls. This is useful in case of connection timeouts
and other error conditions where there is no response body available.
* Increase timeouts in cloudscale_server module
Increase the timeouts to not fail in case the API calls take a bit
longer than usual. The default timeout of fetch_url is 10s which is
quite short. Increase it to 30s. The timeout for waiting for a server
change is increased as well as it calls the API in a loop. Therefore
this value should be larger than the API timeout.
* Send API parameters as JSON in cloudscale_server module
Use JSON to send the POST data to the API instead of an urlencoded
string. Urlencoding is not really a good match for some Python
datatypes.
This fixes an issue when submitting a list of SSH keys which did not get
translated properly.
* Fix typo in cloudscale_server documentation
* cloudscale_sever: Replace timeout const by api_timeout param
Replace the static TIMEOUT_API constant by a user configurable
api_timeout parameter. Also eliminate the TIMEOUT_WAIT constant by
2*api_timeout. This means that the timeout to wait for server changes is
always double the timeout for API calls.
* Use Debian 9 image for cloudscale_server tests
* win_updates: removed scheduled task to use become instead
* updated docs to remove scheduled task info
* fix issue with only installing last update in group
* jsonify inventory
* smarter import, dont pass kwargs where not needed
* added datetime
* Eventual plan for json utilities to migrate to common/json_utils when we split
basic.py no need to move jsonify to another file now as we'll do that later.
* json_dict_bytes_to_unicode and json_dict_unicode_to_bytes will also
change names and move to common/text.py at that time (not to json).
Their purpose is to recursively change the elements of a container
(dict, list, set, tuple) into text or bytes, not to json encode or
decode (they could be a generic precursor to that but are not limited
to that.)
* Reimplement the private _SetEncoder which changes sets and datetimes
into objects that are json serializable into a private function
instead. Functions are more flexible, less overhead, and simpler than
an object.
* Remove code that handled simplejson-1.5.x and earlier. Raise an error
if that's the case instead.
* We require python-2.6 or better which has the json module builtin to
the stdlib. So this is only an issue if the stdlib json has been
overridden by a third party module and the simplejson on the system
is 1.5.x or less. (1.5 was released on 2007-01-18)
This fix adds ability to set MAC address maunally. Before adding
any MAC address, the value is validated. If value is not valid, then
MAC address is set to vCenter generated MAC address.
Also, added integration tests for this change.
Fixes: #21161
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add new filter to parse xml output for network use cases
Fixes#31026
* Add parse_xml filter
* Add documentation for parse_xml filter
* Edited for clarity.
* Fix review comment and add unit tests
* Fix unit test CI failure
* Fix CI issues
* Fix unit test failures
* Fix review comments
* More copy edits.
* Adding RPC attribute arguments to `junos_rpc` network module.
* Specifying module argument version.
* Fixing DOCUMENTATION block.
* First attempt at new test fixture.
* Updated RPC_CLI_MAP.
* Use `result` instead of `reply`.
* Added eagerzeroedthick disk option to disk spec
* Updated docstrings for vmware_guest disk
* VMware: Integration test for disk type
Signed-off-by: Steve Jacobs <sjacobs@brokencrew.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Adds facts about datastores, esxi_host, vm files, ha state, question, is_template, consolidation status and hw_files. Also, adds integration tests for vmware fact enhancement.
This module can be used to manage guests on a vCMP provisioned BIG-IP.
vCMP is a hardware-only feature, therefore this module cannot be used
on the VE editions of BIG-IP.
* move set_module_args to units.modules.utils
* unit tests: reuse set_module_args
* unit tests: mock exit/fail_json in module.utils.ModuleTestCase
* unit tests: use module.utils.ModuleTestCase
* unit tests: fix 'import shadowed by loop variable'
* Add integration test suite for ec2_vpc_subnet
* wrap boto3 connection in try/except
update module documentation and add RETURN docs
add IPv6 support to VPC subnet module
rename ipv6cidr to ipv6_cidr, use required_if for parameter testing, update some failure messages to be more descriptive
DryRun mode was removed from this function a while ago but exception handling was still checking for it, removed
add wait and timeout for subnet creation process
fixup the ipv6 cidr disassociation logic a bit per review
update RETURN values per review
added module parameter check
removed DryRun parameter from boto3 call since it would always be false here
fix subnet wait loop
add a purge_tags parameter, fix the ensure_tags function, update to use compare_aws_tags func
fix tags type error per review
remove **kwargs use in create_subnet function per review
* rebased on #31870, fixed merge conflicts, and updated error messages
* fixes to pass tests
* add test for failure on invalid ipv6 block and update tags test for purge_tags=true function
* fix pylint issue
* fix exception handling error when run with python3
* add ipv6 tests and fix module code
* Add permissions to hacking/aws_config/testing_policies/ec2-policy.json for adding IPv6 cidr blocks to VPC and subnets
* fix type in tests and update assert conditional to check entire returned value
* add AWS_SESSION_TOKEN into environment for aws cli commands to work in CI
* remove key and value options from call to boto3_tag_list_to_ansible_dict
* remove wait loop and use boto3 EC2 waiter
* remove unused register: result vars
* revert az argument default value to original setting default=None
* included inventory and callback in new config
allow inventory to be configurable
updated connection options settings
also updated winrm to work with new configs
removed now obsolete set_host_overrides
added notes for future bcoca, current one is just punting, it's future's problem
updated docs per feedback
added remove group/host methods to inv data
moved fact cache from data to constructed
cleaner/better options
fix when vars are added
extended ignore list to config dicts
updated paramiko connection docs
removed options from base that paramiko already handles
left the look option as it is used by other plugin types
resolve delegation
updated cache doc options
fixed test_script
better fragment merge for options
fixed proxy command
restore ini for proxy
normalized options
moved pipelining to class
updates for host_key_checking
restructured mixins
* fix typo
* Allow backoff for describe_subnets
Improve exception handling to latest standards
* Add integration test suite for ec2_vpc_subnet
* Add test for creating subnet without AZ
Fix bug identified by test
Fixes#31905
* Several tests were marked as FIXME and should have been fixed with
the boto3 move.
* Improved tags output. Add purge_tags option (default: no)
* Allow description and tags update
* Return launch_permissions
* Allow empty launch permissions for image creation
* Empty launch permissions should work the same way for image
creation as no launch permissions
* Cope with ephemeral devices in AMI block device mapping
* Ephemeral devices can appear in AMI block devices, and this information should be returned
* Fix notation for creating sets from comprehensions
This fix adds new fact - 'Cores Per Socket' about vmware guest machine.
Also, adds integration test for this change.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix vault --ask-vault-pass with no tty
2.4.0 added a check for isatty() that would skip setting up interactive
vault password prompts if not running on a tty.
But... getpass.getpass() will fallback to reading from stdin if
it gets that far without a tty. Since 2.4.0 skipped the interactive
prompts / getpass.getpass() in that case, it would never get a chance
to fall back to stdin.
So if 'echo $VAULT_PASSWORD| ansible-playbook --ask-vault-pass site.yml'
was ran without a tty (ie, from a jenkins job or via the vagrant
ansible provisioner) the 2.4 behavior was different than 2.3. 2.4
would never read the password from stdin, resulting in a vault password
error like:
ERROR! Attempting to decrypt but no vault secrets found
Fix is just to always call the interactive password prompts based
on getpass.getpass() on --ask-vault-pass or --vault-id @prompt and
let getpass sort it out.
* up test_prompt_no_tty to expect prompt with no tty
We do call the PromptSecret class if there is no tty, but
we are back to expecting it to read from stdin in that case.
* Fix logic for when to auto-prompt vault pass
If --ask-vault-pass is used, then pretty much always
prompt.
If it is not used, then prompt if there are no other
vault ids provided and 'auto_prompt==True'.
Fixes vagrant bug https://github.com/hashicorp/vagrant/issues/9033Fixes#30993
* Update vmware.py
Incorrect chain of attributes to obtain snapshots from virtual machine. Module 'vmware_guest_facts' uses method 'gather_vm_facts' of vmware.py and always gets empty list of snapshots.
* Added test for module vmware_guest_facts. Checked VM snapshots.
* Fixed tests for vmware_guest_facts. Ignored certificate for vmware_guest_snapshot module.
* Integrated publickey import and removal in iosxr_user
* Fixed linting issues
* Added version added for publickeyfile option
* Added quotation marks to version, oops
* Added some integration tests, added some checks to prevent aggregate users with public keys.
* Added some integration test files
* Created mutually exclusive public_key and public_key_contents versions of config
* Modified tests to use both methods and test more logins
* Added supports for aggregates
* Incorporated provider auth
* Fixed some lint issues
* Fixed a YAML lint issue
* Implemented catches for unconfigured providers.
* Fixed catches, hopefully
* Another test
* Added groups support so you can add users to multiple groups
* Trailing whitespace
* Expand ansible-test --remote-terminate support:
- windows-integration
- network-integration
These commands previously accepted the option, but did not support it.
* Terminate windows and network instances when done.
Add new module vmware_host_facts ,it can get remote vmware host system info like setup module
* modify ansible version
* optimized output for human readable
* add serial number get_system_facts() add ansible_product_serial
* fix pep8 issue and ansible module required format
* Use find_obj method instead get_obj
* add ansible_hostname ansible_distribution_build
* add integration test
* vmware_host_facts integration test add verify
* fix yamllint issue
* fix boilerplate test
* Update vmware_host_facts.py
* fix RETURN key's name
* Adding git_command module and its UT file
* Changing Author Name and removing 2 blank lines
* Removing blank lines
* Adding enos_config and its UT files
* Removing config module as I am allowed to have only module per PR
* Work on Ganesh's Review comments
* John Review Comments on enos_command.py
* Review comments of John
* ios_vlan DI module
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Integration test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* comment out testcases since the image is not available in dci
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* add aggregate test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Do not run script in check mode
Fixes#30676
* Reformat script integration test
* Add integration tests for check mode of script module
* Fix name on test
* Cleanup temp file
* win_script integration test syntaxt changes
* Add check mode tests for win_script
* Use proper variable in test
* Fail if source file does not exist
* Verify script is accessible and don't copy in check mode
Use shlex to properly split shell arguments, though a path with spaces in it still needs to be quoted in the playbook.
Add note to docs describing such.
Improve error message if file is not found indicating there may be a space in the path.
* Properly encode path now that path is split using shlex
* Allow for spaces in both path and script name
* Add unicode character test to Linux script tests
* Add Linux test for space in path to script
* Remove uses of assert in production code
* Fix assertion
* Add code smell test for assertions, currently limited to lib/ansible
* Fix assertion
* Add docs for no-assert
* Remove new assert from enos
* Fix assert in module_utils.connection
* Clean up after two recent synchronize tests
- add clean up after the last two tests in synchronize to make them
match with the expectations in the previous tests
Signed-off-by: Robert Marshall <rmarshall@redhat.com>
* Add link-dest functionality to synchronize module
- add the link-dest option to the synchronize module code
- add tests for the link-dest option
- add documentation of the link_dest option to synchronize
- modify changed flag so it can properly work around rsync
upstream not flagging hardlinks as a change properly in
formatted output
Signed-off-by: Robert Marshall <rmarshall@redhat.com>
* Minor change to test
* Add mtu option nxos_interface feature idea
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add unit test for mtu feature
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Better handling of malformed vault data envelope
If an embedded vaulted variable ('!vault' in yaml)
had an invalid format, it would eventually cause
an error for seemingly unrelated reasons.
"Invalid" meaning not valid hexlify (extra chars,
non-hex chars, etc).
For ex, if a host_vars file had invalid vault format
variables, on py2, it would cause an error like:
'ansible.vars.hostvars.HostVars object' has no
attribute u'broken.example.com'
Depending on where the invalid vault is, it could
also cause "VARIABLE IS NOT DEFINED!". The behavior
can also change if ansible-playbook is py2 or py3.
Root cause is errors from binascii.unhexlify() not
being handled consistently.
Fix is to add a AnsibleVaultFormatError exception and
raise it on any unhexlify() errors and to handle it
properly elsewhere.
Add a _unhexlify() that try/excepts around a binascii.unhexlify()
and raises an AnsibleVaultFormatError on invalid vault data.
This is so the same exception type is always raised for this
case. Previous it was different between py2 and py3.
binascii.unhexlify() raises a binascii.Error if the hexlified
blobs in a vault data blob are invalid.
On py2, binascii.Error is a subclass of Exception.
On py3, binascii.Error is a subclass of TypeError
When decrypting content of vault encrypted variables,
if a binascii.Error is raised it propagates up to
playbook.base.Base.post_validate(). post_validate()
handles exceptions for TypeErrors but not for
base Exception subclasses (like py2 binascii.Error).
* Add a display.warning on vault format errors
* Unit tests for _unhexlify, parse_vaulttext*
* Add intg test cases for invalid vault formats
Fixes#28038
* azure_rm_virtualmachine: added support for specifying custom image
* Use separate parameter for custom_image, add very basic test
* missed the version_added tag for doco
* removed whitespace I accidentally left in
* merged custom image into the image dict and added more tests
* added one more test
* implements jsonrpc message passing for ansible-connection
* implements more generic mechanism for persistent connections
* starts persistent connection in task_executor if enabled and supported
* supports using network_cli as top level connection plugin
* enhances logging for persistent connection to stdout
* Update action plugins
* Fix Python3 RPC
* Fix Junos bytes<-->str issues
* supports using netconf as top level connection plugin
* Error message when running netconf on an unsupported platform
* Update tests
* Fix `authorize: yes` for `connection: local`
* Handle potentially JSON data in terminal
* Add clarifying detail if possible on ConnectionError
* Protect AWS credentials from accidental commits
* Improve documentation for IAM policies
* Update ELB tests to be multi region
Allow AZs to reflect the region in which the tests are run.
This will not work for regions with fewer than three AZs,
but those are relatively rare
This fix adds details about snapshots in result of
vmware_guest_snapshot, when operation is successful.
Fixes: #32154
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Moving modules from lenovo to cnos
* Merge conflicts
* Update cnos_conditional_template.py
Removed
180:5: E265 block comment should start with '# '
188:34: E226 missing whitespace around arithmetic operator
* Update cnos_template.py
155:5: E265 block comment should start with '# '
162:34: E226 missing whitespace around arithmetic operator
* Update cnos_vlan.py
210:1: E302 expected 2 blank lines, found 1
* Update cnos_backup.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_bgp.py
Added
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_backup.py
Added a line extra
* Update cnos_command.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_conditional_command.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_conditional_template.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_factory.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_facts.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_image.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_interface.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_portchannel.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_reload.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_rollback.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_save.py
Add
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_showrun.py
Add
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_template.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_vlag.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_vlan.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_backup.py
Moving it to top of file
* Update cnos_backup.py
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Putting condition to bye pass paramiko
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Removing unused import and white spaces
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Update cnos_template.py
* Squashing all commits to one as suggested by John
* Adding Unit test method for the module enos_facts.py
* Pep8 and Ylint issues addressed
* Trying again to remove blank line. Some scripts are required for this.
* Bug Fixing for interfaces
* Editing for over indenting issue
* E203 whitespace before ','
* Update enos.py
Added warnings argument as to check_args method
* Update enos_facts.py
Added warnings to check_args method
* Move profile and region checking to module_utils.ec2
Remove ProfileNotFound checking from individual modules
There are plenty of `if not region:` checks that could be removed,
once more thorough testing of this change has occured
The ec2_asg, iam_managed_policy and ec2_vpc_subnet_facts modules
would also benefit from this change but as they do not have tests
and are marked stableinterface, they do not get this change.
* Ansible files module sanity pep8 fixes
* Ansible system module and playbook base.py
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Various changes
* Various changes
* Various changes
* Various changes
* Undo blank lines not required by sanity checks
* Various changes
* Various changes
* Various changes
* Various changes
* Various changes
* Undo blank line changes not required by sanity checks
* Various changes
* Various changes
* Various changes
* Various changes
* Various changes
* Missing piece after merge
* Blank lines
* Blank line
* Line too long
* Fix typo
* Unnecessary quotes
* Fix example error
* Add configuration of vlan trunk, security settings and port policies, and tests
This commit adds the following capabilities to the
vmware_dvs_portgroup module:
- Support for VLAN trunk portgroup
- Support for all security settings (promiscuous, forged transmits & mac
address changes)
- Support for all the port specific policies
- port specific policies match the vCenter UI behaviour (for instance:
block override is enabled by default)
- Cleanup and use of proper API entities not root entities
- Integration testing
* Cleanup of docs and adding more examples
* win_dsc: improved parameter handling
* removed uneeded try/catch leftover from testing
* removed undeed return values
* added custom DSC to fully test out casting
* fix up codestyle issues
* using new Requires ps version check
* fixed up error message check on earlier ps version
This fix allows user to specify alternative maintenance DB
required for initial connection in Postgresql_db module.
Also, adds pep8 related fixes.
Fixes: #30017
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
So we fixed everything that was not a module to be PEP8 compliant, and
in the meantime these 5 new files were additionally disabled from PEP8
testing.
This fixes it.
Also update Copyright/License statements.
* win_become: make it easier to become with an admin token
* Fixed up pep8 whitespace
* fix for Server 2008
* Added support for async and become on newer hosts and fix warnings
* show specific undefined var errors on -v in debug
allows users to get more specific information about undefined errors
as they might be looking at a complex data structure and need to find
the specific leaf that has the issue
* now tests works at all verbosity levels
* updated to unicode objects
* When getting the stack events we need to consider the case where we don't have ClientRequestToken fixes#32396
* Adding tests for the case when the ClientRequestToken is not present in the stack creation.
* Renaming the stack that the test for Client Request Token requires so it won't cause collisions with the basic test.
* Ensure include_role unit tests check something
This is not the case: get_tasks_vars doesn't yield
* Fix include_role unit tests
Since e609618274, include_role are not
static anymore.
* win_package: add support for arguments as list
* re-added failure tests as they were accidentally commented out
* changed exit_code in failure messages to rc
* [ec2_ami_facts] new boto3-based module as a replacement for ec2_ami_find
- new boto3-based module to gather facts about ec2 images
- intended to replace ec2_ami_find which uses boto
- an ami find task (using new module) added to the ec2_ami integration test
* [ec2_ami_facts] Use AnsibleAWSModule. Catch BotoCoreError.
* add ec2_ami_facts alias to tests
* [ec2_ami_facts] return ami launch permissions as well
Matt Martz