* Refactor yum and dnf, add feature parity
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove unnecessary module_utils, move the classes into the module code
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove yum -> yum4, out of scope
Signed-off-by: Adam Miller <admiller@redhat.com>
* use ABCMeta
Signed-off-by: Adam Miller <admiller@redhat.com>
* re-arrange run() caller vs callee
Signed-off-by: Adam Miller <admiller@redhat.com>
* make sanity checks happy
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix yum unit tests
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove unecessary debug statements, fix typo
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix licensing and attribution in yumdnf module_util
Signed-off-by: Adam Miller <admiller@redhat.com>
* include fix from PR 40737
original commit 5cbda9658a
original Author: Strahinja Kustudic <kustodian@gmail.com>
yum will fail on 'No space left on device', fixes#32791 (#40737)
During the installing of packages if yum runs out of free disk space,
some post install scripts could fail (like e.g. when the kernel
package generates initramfs), but yum would still exit with a status
0. This is bad, especially for the kernel package, because it makes
it unable to boot. Because the yum module is usually used for
automation, which means the users cannot read every message yum
prints, it's better that the yum module fails if it detects that
there is no free space on the disk.
Signed-off-by: Adam Miller <admiller@redhat.com>
* Revert "fix licensing and attribution in yumdnf module_util"
This reverts commit 59e11de5a2.
* move fetch_rpm_from_url out of yumdnf module_util
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix the move of fetch_rpm_from_url
Signed-off-by: Adam Miller <admiller@redhat.com>
- support config operations for EXOS-based platforms
- add regex to detect command failure responses
- add exos action plugin for "backup" operation
- add unit tests for exos_command (currently 94% coverage of
exos_config.py)
Add exos_facts module. Known limitations at this time include:
- Interface MTU is not reported.
- Only primary interface IP is reported.
Add basic unit tests for the exos_facts module.
An EXOS CLI prompt can be prefixed with '! ' (shutting down), '* '
(running configuration does not match saved configuration), and
can include various status tokens within parentheses after these
prefixes. Update prompt regex to accept valid CLI prompts.
* Refactoring to persistence connection BGP, factory, reload, save, showrun modules
* Refactoring methods from Util to module file
* Removing BGP Utility methods
* Adding to errors that need to be ignored
* new nios module support
* new nios module support
* new nios module support
* new nios module support
* new nios module support
* new nios module support
* new nios module support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* test/integration/targets/nios_naptr_record/tasks/nios_naptr_record_idempotence.yml
new nios module integration test support
* fix pep8 error
* fix pep8 error
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* refactored from procedural to OOP
* updated ongoing maintenance windows to PagerDuty REST API v2
* update create maintenance windows to PagerDuty REST API v2
* update absent maintenance windows to PagerDuty REST API v2
* update pager alert module to PagerDuty REST API v2
* removed basic HTTP authorization
updated parameter description and examples
* fix failed sanity checks
* revised documentation according to review
* make obsolete service key parameter an alias to a new integration key parameter
* Implement initial RouterOS support
* Correct matchers for license prompts
* Documentation updates & mild refactor
* Remove one last Cisco function
* Sanity test fixes
* Move imports to the beginning
* Remove authorize property
* Handle ANSI codes
* Revert to_lines function
* CR fixes
* test(routeros): add unit tests
* Added another test (with ANSI colors and banner in fixture).
* Ignore CRLF line endings in system_package_print file
* fix: review by ganeshrn
* NXAPI ssl ciphers & protocols default values
* TLSv1, TLSv1.1, TLSv1.2 and weak cipher support
* NXOS NXAPI weak/strong cipher & TLSv 1.2, 1.1 & 1.0 support
* Version checking for strong/weak ciphers & TLS 1.2, 1.1 & 1.0 support
* Cleaned up erroneously committed changes.
* Specific NXOS platform checking for nxapi ssl ciphers & protocols
* Fixed ansibot reported errors.
* Resolved ansibot reported error.
* Added network_os_version to mocked up N7K unit test device_info
* Calling get_capabilities() once in main and passing results into methods.
* Removed raising exceptions when platform capabilities return None
per reviewers request. Skipping nxapi ssl options when capabilities
are None and generating a warning when these options are skipped
* Cleaned up explicit checks for None/not None
* CNOS Vlag module is refactored to use persistence connection instead of paramiko.
* Changing interface and port channel modules to persistent connection and adding UT for them.
* Fixing pep8 issues
* Removing trailing new line
* Removing trailing new line
* Removing trailing new line
* Correcting indentation mistake
* Update cnos_vlag.py
* Removing commented examples
They are commented because those configurations are not meant for L2 ports
* nxos cliconf plugin refactor
Fixes#39056
* Refactor nxos cliconf plugin as per new api definition
* Minor changes in ios, eos, vyos cliconf plugin
* Change nxos httpapi plugin edit_config method to be in sync with
nxos cliconf edit_config
* Fix CI failure
* Fix unit test failure and review comment
Now that we don't need to worry about python-2.4 and 2.5, we can make
some improvements to the way AnsiballZ handles modules.
* Change AnsiballZ wrapper to use import to invoke the module
We need the module to think of itself as a script because it could be
coded as:
main()
or as:
if __name__ == '__main__':
main()
Or even as:
if __name__ == '__main__':
random_function_name()
A script will invoke all of those. Prior to this change, we invoked
a second Python interpreter on the module so that it really was
a script. However, this means that we have to run python twice (once
for the AnsiballZ wrapper and once for the module). This change makes
the module think that it is a script (because __name__ in the module ==
'__main__') but it's actually being invoked by us importing the module
code.
There's three ways we've come up to do this.
* The most elegant is to use zipimporter and tell the import mechanism
that the module being loaded is __main__:
* 5959f11c9d/lib/ansible/executor/module_common.py (L175)
* zipimporter is nice because we do not have to extract the module from
the zip file and save it to the disk when we do that. The import
machinery does it all for us.
* The drawback is that modules do not have a __file__ which points
to a real file when they do this. Modules could be using __file__
to for a variety of reasons, most of those probably have
replacements (the most common one is to find a writable directory
for temporary files. AnsibleModule.tmpdir should be used instead)
We can monkeypatch __file__ in fom AnsibleModule initialization
but that's kind of gross. There's no way I can see to do this
from the wrapper.
* Next, there's imp.load_module():
* https://github.com/abadger/ansible/blob/340edf7489/lib/ansible/executor/module_common.py#L151
* imp has the nice property of allowing us to set __name__ to
__main__ without changing the name of the file itself
* We also don't have to do anything special to set __file__ for
backwards compatibility (although the reason for that is the
drawback):
* Its drawback is that it requires the file to exist on disk so we
have to explicitly extract it from the zipfile and save it to
a temporary file
* The last choice is to use exec to execute the module:
* https://github.com/abadger/ansible/blob/f47a4ccc76/lib/ansible/executor/module_common.py#L175
* The code we would have to maintain for this looks pretty clean.
In the wrapper we create a ModuleType, set __file__ on it, read
the module's contents in from the zip file and then exec it.
* Drawbacks: We still have to explicitly extract the file's contents
from the zip archive instead of letting python's import mechanism
handle it.
* Exec also has hidden performance issues and breaks certain
assumptions that modules could be making about their own code:
http://lucumr.pocoo.org/2011/2/1/exec-in-python/
Our plan is to use imp.load_module() for now, deprecate the use of
__file__ in modules, and switch to zipimport once the deprecation
period for __file__ is over (without monkeypatching a fake __file__ in
via AnsibleModule).
* Rename the name of the AnsiBallZ wrapped module
This makes it obvious that the wrapped module isn't the module file that
we distribute. It's part of trying to mitigate the fact that the module
is now named __main)).py in tracebacks.
* Shield all wrapper symbols inside of a function
With the new import code, all symbols in the wrapper become visible in
the module. To mitigate the chance of collisions, move most symbols
into a toplevel function. The only symbols left in the global namespace
are now _ANSIBALLZ_WRAPPER and _ansiballz_main.
revised porting guide entry
Integrate code coverage collection into AnsiballZ.
ci_coverage
ci_complete
* ios_user module - add sshkey support
* ios_user - Add version_added to sshkey option
* ios_user - pep8 indentation fixes in unit tests
* ios_user - use b64decode method that works on python 2 and 3
* Add support for global IGMP configuration on onyx switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add support for global IGMP configuration on onyx switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Changing Lenovo Inc to Lenovo and update License file to be consistent.
* Changing cnos_vlan from paramiko to persistence connection of Ansible. Also talking care of CLI changes in CNOS commands with backward compatibility.
* Fixing Validation issues
* Trailing lines removal
* Review comments of Gundalow are getting addressed. He mentioned only at one place for cnos.py. But I have covered the entire file.
* Changes to incorporate Review comments from Qalthos
* Removing configure terminal command from module code
* Aligning with change in run_cnos_commands method changes
* Editing cliconf for latest CNOS CLIs
now can use `ansible-test units module_name` for the aws_s3 and aws_api_gateway modules
changes to modules/cloud/amazon/aws_api_gateway and modules/cloud/amazon/aws_s3 are not triggering the unit tests; also fix aws_s3 from importing non-exist module and skipping tests
changes to module_utils/aws/core.py are only being unit tested on modules that import from the file (if they have a corresponding test) or tests that import from the file themselves.
* add submode features ipv4/ipv6
* add tests for submode
* the parameters both_ * were not idempotent, in what is read in the configuration we have a list with 2 entries (import, export) while the input parameter has only one parameter which will be applied twice
* add docstring to the ios_vrf module + provide a fix for: https://github.com/ansible/ansible/issues/41581
* complete tests
* add missing description
* fix KeyError for address-family ipv*
* fix both_* tests
* fix E231, W292, W293
* fix W293
* remove set has it doesn't preserve order of routes
* fix E106
* remove ImportError: cannot import name OrderedDict
* We should be able to mix the parameters for the routes targets , while remaining imdepotent. During the first implementation we did not take this into account, which did not correspond to the reality of the needs in production (to be able to use each parameter indifemently together)
* remove epdb reference
* FIX E111, E106
* FIX E302
* using loop produce a result who was not imdepotent
* FIX E241
* fix: used pass intead of list
* Add the NIOS RECORD PTR Module
* FIX E241,E231, E105
* FIX module should not be executable
* FIX module RWX
* Remove change in nios_srv_record
* Remove change in nios_srv_record
* FIX test_nios_ptr_record_update_comment
* ADD: Integration and target tests for the NIOS PTR RECORD module.
* FIX module name in integrations tests
* Update integration
* Refactor nios_ptr_record module
* Refactor the nios_ptr_record_idempotence
* FIX name
* Smoketests for the NIOS modules does not take care of the PTR:RECORD object
* REM the default for view
* Add finals test, after adding the PR (https://github.com/ansible/nios-test-container/pull/1) in order to handle PTR:RECORD
* add the define nios specific constant for PTR:RECORD
* fix: documentation style
* add create an ipv6 ptr record
* rename class name, add ipv6 unittest
The OVSDB schema consists of typed columns. The 'key' parameter is
required only for columns with type of a 'map'. This patch makes 'key'
an optional parameter to allow setting values for other column types
like int.
Fixes#42108
* ios_facts: Report file system space
Parse total and free space from dir output. For this, add a hash
filesystems_info containing the keys spacetotal_kb and spacefree_kb.
* ios_facts: Add unit test for file system space reporting
* ios_facts: Add integration test for file system space reporting
* Update eos cliconf plugin methods
* Refactor eos cliconf plugin
* Changes in eos module_utils as per cliconf plugin refactor
* Fix unit test and sanity failures
* Fix review comment
* Add run_commands api for ios and vyos cliconf plugin
* Add run_commands api to ios and vyos cliconf plugin
* Refactor ios and vyos module_utils to check return code
in run_commands
* Fix Ci failures
Currently TestCreateJavaKeystore::test_create_jks_success is failing on
a machine with SELinux because set_context_if_different is not mocked
and hence tries to access a file that doesn't exist because it has been
mocked previously.
Also, changing path to a path that won't exist for sure.
* Add a module parameter to configure the max fetched AWS CFN stack events
* Add version documentation for new configuration option
* Increase default in order to make sure that enough are fetched by default. This align roughly with the limit of manageable resources in CloudFormation.
* vyos and ios cliconf plugin refactor
* Refactor vyos cliconf plugin
* Change vyos module_utils and vyos_config as per refactor
* Minor changes in ios cliconf plugin
* Fix unit test failure
* Fix sanity issues
* Add get_diff to rpc list
* Refactor ios cliconf plugin and ios_config module
* Refactor ios cliconf plugin to support generic network_config module
* Refactor ios_config module to work with cliconf api's
* Enable command and response logging in cliconf pulgin
* cliconf api documentation
* Fix unit test and other minor changes
* Doc update
* Fix CI failure
* Add default flag related changes
* Minor changes
* redact input command logging by default
* Adding changed option to save_when for aireos
* Deprecating save option for aireos_config.
* Updating version_added to 2.7 since the PR missed the window for 2.6
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* to resolve the bug 40709
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* to fix shippable nios automation error
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* shippable error fix
* shippable error fix
* shippable error fix
* shippable error fix
* shippable error fix
* review comment fix
* shippable error fix
* shippable error fix
* Remove 1.1.1.1 from *_config tests
* remove from *_smoke and *_system
* Miscellaneous other tests
* Remove from module documentation as well
* Remove from unit tests as well
* Remove accidental duplication from rebase
* Add a module to create a java key store (jks) from a certificate
* Create a jks from a certificate and a private key (secured by a password)
* Add an option to recreate the jks (useful when you want to update the jks password)
* If the certificate changed, recreate the jks
* Version added is now 2.7
* Refactor ec2_group
Replace nested for loops with list comprehensions
Purge rules before adding new ones in case sg has maximum permitted rules
* Add check mode tests for ec2_group
* add tests
* Remove dead code
* Fix integration test assertions for old boto versions
* Add waiter for security group that is autocreated
* Add support for in-account group rules
* Add common util to get AWS account ID
Fixes#31383
* Fix protocol number and add separate tests for egress rule handling
* Return egress rule treatment to be backwards compatible
* Remove functions that were obsoleted by `Rule` namedtuple
* IP tests
* Move description updates to a function
* Fix string formatting missing index
* Add tests for auto-creation of the same group in quick succession
* Resolve use of brand-new group in a rule without a description
* Clean up duplicated get-security-group function
* Add reverse cleanup in case of dependency issues
* Add crossaccount ELB group support
* Deal with non-STS calls to account API
* Add filtering of owner IDs that match the current account
* parted module not idempotent for esp flag and name
Fixes#40452
Currently the parted module doesn't take into account names with
spaces in them which leads to non-idempotent transactions on the
state of the system because the name comparison will never succeed.
Also, when the esp flag is set, parted infers the boot flag and the
parted module did not previously account for this. This lead to
non-idempotent transactions as well.
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix unit tests, expected command changed in the patch
Signed-off-by: Adam Miller <admiller@redhat.com>
Change the command to get the interface in a vlan "show vlan" => "show vlan brief"
Change the parsing of the return command of the switch.
The return of the ios command is fixed so i cut with fix number of carracter.
Adding looking for the next line to add the forgeted interfaces.
* Add the ability to specify an install_dir to the gem module
* Add GEM_HOME when installing a non-global gem
* Add tests for custom gem path
* Fix sanity tests
* Add changelog entry
* Rebase and add tests for incorrect options
Co-authored by: Antoine Catton <devel@antoine.catton.fr>
* Do not join flag parameters
This put a comma between every character of the tcp flag parameters, resulting in a bad iptables command.
Fixes#36490
* Use suboptions to ensure tcp_flags options are lists
* Add unit tests for tcp_flags
* Add example of how to use tcp_flags
* Added gitlab_hooks module and related tests
* Fix sanity check issues
* Refactor to use common util method, add check_mode support
* Fix module shebang
* Added module gitlab_deploy_key and related tests
* Fix sanity check issues
* Refactor to use common util method, add check_mode support
* Fix module shebang
* Modifying cnos-facts, cnos_command and cnos-config in line with the design followed in Ansible. Adding unit test cases for these modules. Added plugins to support them.
* Removing doc fragment conflicts with other modules
* Replacing show with display
Fixes several bugs exposed in #34893
* Fixes relative path handling in copy so that it splits directories and
reconstructs the correct file path
* Return failed in the proper circumstances
* Add members to bigip_gtm_pool
* Add monitors to bigip_gtm_pool
* Add availability_requirements to bigip_gtm_pool
* Refactor bigip_gtm_pool
* Normalize the product value returned by gtm facts
* Corrected various documentation
* Updated various F5 coding conventions
* Add partition to bigip_static_route
* Added more unit tests
* Refactor bigip_gtm_virtual_server
* Add translation_address to bigip_gtm_virtual_server
* Add translation_port to bigip_gtm_virtual_server
* Add availability_requirements to bigip_gtm_virtual_server
* Add monitors to bigip_gtm_virtual_server
* Add virtual_server_dependencies to bigip_gtm_virtual_server
* Add link to bigip_gtm_virtual_server
* Add limits to bigip_gtm_virtual_server
* Add partition to bigip_gtm_virtual_server
* Fix bigip_gtm_server to correctly create other server types
* Add type to virtual_server
* Add address_translation to virtual_server
* Add port_translation to virtual_server
* Add ip_protocol to virtual_server
* Add firewall_enforced_policy to virtual_server
* Add firewall_staged_policy to virtual_server
* Add security_log_profiles to virtual_server
* Removed forwarders parameter that did not work
* Updated coding conventions
* Added ssl_cipher_suite and ssl_protocols to bigip_device_httpd
* Added more unit tests
* Stabilize ec2_vpc_vgw and ec2_vpc_vpn so tests for ec2_vpc_vpn_facts in PR 35983 can be run in CI
* Add updated placebo recordings
* ensure find_vgw uses the virtual gateway id if available
Add AWSRetry.jittered_backoff to attach_vpn_gateway to deal with errors when attaching a new VPC directly after detaching
Add integrations tests for ec2_vpc_vgw
* Sort VPN Gateways by ID
* a refactor of pool member and node modules to be inline with current f5 conventions
* Added priority_group_activation to pools
* various other small convention fixes and bug fixes
* Adds gnat provisioning to bigip_provision
* Adds special handling for AFM in bigip_provision
* Add device rebooting for provisioning as necessary
* Refactored route domain module to be inline with current f5 conventions
* Minor refactors across modules
* Adding slxos_config module and supporing util functions.
* Adding slxos module_utils load_config test
* Adding slxos_config module tests
* Removing unneeded required false statements from slxos_config module
* Removing version_aded from slxos_config module
* Removing force and save from slxos config module
* Removing save test
* Adding slx_command module and supporting module_utils.
This commit adds the slx_command module and tests as well as the
required slxos module_utils.
* Update copyright in header
* Adding missing module init
* Cleaning up shebangs/licensing.
* Incorporating feedback
Removing reference to `waitfor` alias in `slxos_command` module.
Adding `Extreme Networks` to `short_description` of `slxos_command` module.
* Adding cliconf tests
* Fixing 3.X tests
* Adding docstrings to test methods for slxos cliconf tests
* Adding slxos terminal tests
* Adding slxos module_utils tests
* Adding Extreme Networks team members to BOTMETA.yml
The generated file was completely unusable by the system
therefore the fix which ensures that diffing the file
prior to changes and after only shows diffs
Furthermore the code did not work for Python 3.6
> f.writelines(to_bytes(lines, errors='surrogate_or_strict'))
E TypeError: a bytes-like object is required, not 'int'
The other modifications (lambda variable renaming) is to
comply with default flake8 rules
NSO verify did not handle leaf-list value verification in 4.5 and
later due to changes made for configuration writing made.
map prefix for identityref types in verification.
NSO operations can take much longer than 10 seconds as they operate on
real network equipment, set default timeout to 5 minutes and allow for
user override.
* fix nxos_l3_interface tests as n35 doesn't support ipv6
* add terminal dont-ask to nxos_feature and nxos_lldp
* put interfaces in L2 mode for N35
* fix nxos_feature unit-tests
The modules in this patch include waits that need to happen to ensure
something is correctly configured on a BIG-IP. These waits were
raised as an issue in a recent ansible-testing meeting.
This patch eliminates the waits by mocking time.sleep
Start using this to construct shade OpenStack Cloud objects in a
consistent manner. This will let us centralize things like dealing with
password arguments and whatnot. It also allows us to introduce the
ability to pass a fully formed config dict directly to the module.
Migrate all OpenStack modules to use openstack_cloud_from_module.
Have it return the shade library since it's responsible for
importing shade and shade is needed for the exceptions.
Only pull specific OpenStack arguments for the constructor
Rather than passing **module.params to the shade constructor, pull out
only the values that make sense. This should prevent the issues with
module parameters stepping on shade parameters.
Replace module.params.pop with module.params.get
We don't need to pop these anymore since the shade constructor is now
using opt-in values.
Using real urls is ungood. Use example.com domains. Also, get rid of the
antiquated port numbers.
* Fixing eos_config save option. Was removed when deprecated. Fixing other deprecation documentation. Adding unit tests.
* Fixing removed_in_version for force.
* Fix over-byte
* Update ios tests to call `provider`
To continue to support testing `connection: local`
* Fix command dict handling in ios_user
* Clean up unit tests, too
* Revert model and serialnum to older version
* Add stacked versions of model and serialnum as separate facts
* Add unit test to check stacked output
* Alter model regex to address #34768
Enforce module deprecation.
After module has reached the end of it's deprecation cycle we will replace it with a docs stub.
* Replace deprecated modules with docs-only sub
* Use of deprecated past deprecation cycle gives meaningful message (see examples below)
* Enforce documentation.deprecation dict via `schema.py`
* Update `ansible-doc` and web docs to display documentation.deprecation
* Document that structure in `dev_guide`
* Ensure that all modules starting with `_` have a `deprecation:` block
* Ensure `deprecation:` block is only used on modules that start with `_`
* `removed_in` A string which represents when this module needs **deleting**
* CHANGELOG.md and porting_guide_2.5.rst list removed modules as well as alternatives
* CHANGELOG.md links to porting guide index
To ensure that meaningful messages are given to the user if they try to use a module at the end of it's deprecation cycle we enforce the module to contain:
```python
if __name__ == '__main__':
removed_module()
```
* Adding new code for new module and new module_utils with the pip pyfmg package
* Changed login and logout functionality and renamed mod_utils file as well as cleaned up PEP8 syntax
* Removing extra Ansible parameters and fixing more syntax issues
* Fixing more syntax issues and comparing against previous FTNT script module
* Changing import location to pass syntax checks
* Fixing pylint errors
* Removing test files
* Add unit tests and enabling a login session check within main in order to throw error if network connection exception
* Fixing syntax issues for adding unit tests
* Changing case for pip package requirements
* adding comments
* adding version restriction on pip package for testing
* adding version restriction on pip package for testing
* More comments
* Fixing documentation errors and add the ability to skip a test if it isn't present
* Fixing Pep8 error with whitespace (tab) in the row
* Moved the encryption to its own action method.
* removed silly default value for encryption type.
* Code formatting issues from pull request ANSIBOT.
* changed version_added to "2.5"
because of new new options available
* changed version_added to "2.5"
because of new new options available
* changed version_added to "2.5"
because of new new options available
There are changes that the merge config can fail, but the module
will still report success. This adds a blob of code to start
collecting those failures and bubbling up a module failure
accordingly.
This patch is primarily a refactor to make the validate-modules arg-spec
no longer generate a traceback. It additionally includes removal of deprecated
code in the virtual server module.
The main patch is to remove the traceback generating code. There are
other small fixes that were made in addition to doing that.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
The main purpose of this patch is to do the refactor that
supports replacing tracebacks with fail_json. Additionally, the
following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
Primarily, this patch contains refactors to remove tracebacks that
are generated when libraries are missing. There is also,
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg. Minor bug fixes made during this refactor.
This patch was primarily an effort to reduce traceback errors for
work that sivel was doing. Part of (and in some cases in addition to)
that, the following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
* Mellanox OS name change: MLNXOS changed to ONYX
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix alphabetical order of modules metadata
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add new module for managing ospf protocol on mlnxos devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix test name, and documentation.
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add new module mlnxos_protocol for enabling disabling protocols on
MLNX-OS Mellanox network devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix Test Class name
* Fix IP routing protocol support
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add missing support for check_mode, and Fix documentation
Signed-off-by: Samer Deeb <samerd@mellanox.com>
A bug in the parsing of single commands with commas
Token cleanup
Password argument now defaults to false
Addition of coding conventions from v3 conventions
This module can be used to add license offerings to a pool. This
is the second part required to license a remote device from a
BIG-IQ (the first being to create a pool with bigiq_regkey_pool)
* Removes deprecated code from bigip_monitor_tcp
The deprecated code was moved into its own modules. We let it lay
here for a release, and now I'm removing it.
* Fixing upstreaming tests
This module can be used to create GTM servers (not to be confused with
GTM virtual servers) on a BIGIP. GTM servers are a component of the
datacenter, and GTM virtual servers are their members.
Code refactor to use f5 coding conventions. Removed deprecated
"enabled/disabled" params (this is now a state). Adds token cleanup
for cases where many api calls are made.
This refactors the bigip_virtual_server module to address several issues and
missing features. Additionally it adds tests and updates the coding standards
to the recent version used by f5. Finally, it removes deprecated items that
were announced in 2.4
* mutually_exclusive add - ios_config parents works with lines by not src
* mutually_execlusive parents,src added to all other net modules
* tests for mutually_exclusive parents,src and whitespce removal
* Add module mlnxos_linkagg for configuring LAG and MLAG on Mellanox
switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Remove unnecessary method in unit-test
remove _execute_module and use execute_module from base class
* update version parsing and move requirements to nso_* modules
prepare for introduction of nso_show module that has other version
requirements than the existing nso_* modules.
* Add nso_show module for retreiving config from Cisco NSO
New module that supports getting configuration and operational data
from Cisco NSO.
This fix check if DNS4 is None or not before proceeding with
other operations. Also, added unit test for this change.
Signed-off-by: Fedor Sumkin <qosys.net@gmail.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fixing aruba's inconsitent indenting.
* Adding config with different children indentation and unit test to confirm the different spacing does not matter.
* Fixing pylint check. Missed an r prefix.
* When inserting a new rule in `insert_after_rule`, check if the old rule is
the last rule, to avoid a list index out of range error when attempting to
access the next rule.
* Add a test for inserting a new rule after the last rule.
* Fixing save so it still works. Adding changed as an option for save_when.
* Updating unit tests.
* Updating description to state that changed was added in 2.5.
* - Netconf plugin addition for iosxr
- Utilities refactoring to support netconf and cliconf
- iosx_banner refactoring for netconf and cliconf
- Integration testcases changes to accomodate above changes
* Fix sanity failures, shippable errors and review comments
* fix pep8 issue
* changes run_command method to send specific command args
* - Review comment fixes
- iosxr_command changes to remove ComplexDict based command_spec
* - Move namespaces removal method from utils to netconf plugin
* Minor refactoring in utils and change in deprecation message
* rewrite build_xml logic and import changes for new utils dir structure
* - Review comment changes and minor changes to documentation
* * refactor common code and docs updates
In case of workflow delete action, the returned 404 status code
considered as invalid although it's a valid code for not found (deleted)
entity.
Removed verification of the status. Only success should be verified.
Fixes#33524
* Porting tests to pytest
* Achievement Get: No longer need mock/generator.py
* Now done via pytest's parametrization
* Port safe_eval to pytest
* Port text tests to pytest
* Port test_set_mode_if_different to pytest
* Change conftest AnsibleModule fixtures to be more flexible
* Move the AnsibleModules fixtures to module_utils/conftest.py for sharing
* Testing the argspec code requires:
* injecting both the argspec and the arguments.
* Patching the arguments into sys.stdin at a different level
* More porting to obsolete mock/procenv.py
* Port run_command to pytest
* Port known_hosts tests to pytest
* Port safe_eval to pytest
* Port test_distribution_version.py to pytest
* Port test_log to pytest
* Port test__log_invocation to pytest
* Remove unneeded import of procenv in test_postgresql
* Port test_pip to pytest style
* As part of this, create a pytest ansiblemodule fixture in
modules/conftest.py. This is slightly different than the
approach taken in module_utils because here we need to override the
AnsibleModule that the modules will inherit from instead of one that
we're instantiating ourselves.
* Fixup usage of parametrization in test_deprecate_warn
* Check that the pip module failed in our test
* Refactor common network shared and platform specific code into package (part-1)
As per proposal #76 refactor common network shared and platform specific
code into sub-package.
https://github.com/ansible/proposals/issues/76
* ansible.module_utils.network.common - command shared functions
* ansible.module_utils.network.{{ platform }} - where platform is platform specific shared functions
* Fix review comments
* Fix review comments
* Refactors bigip_node
Includes a number of fixes and enhancements in addition to refactoring
the code to be inline with f5 standards
* Fixes upstream errors
* Adds bigip_policy_rule module
This module is the second component of managing LTM policies on
BIG-IP. This module lets you manage the rules of a policy
* Fixing upstream errors
* Correcting YAML errors
* Fixes and features for bigip_provision
Adds support for dedicated modules. Fixes bug in minimum name.
Adds wrappers around checking for up-ness so that they will contribute
to the watch loop
* Fixes upstream errors
* Added . and / to rule args regexp
Things like pam_echo.so file=/etc/foo.txt weren't being matched and
causing incorrect change counts. Adding / and . fixed that.
Fixes#33351
* pamd: test argument with value
Relates #33351
* Adding module enos_config and its UT files
* Removing trailing line
* Removing trailing lines
* Editing enos_module.py to fix build errors
* Removing blank lines in end
* Updating enos_config.py based on review comments
* Adding one more blank line
* Removing training white space
* Removing test_enos_config_force method from UT
* Updating documentation
* Comments by John, Remove version_added: "2.5"
* Add netscaler_nitro_request module
* Make changes as requested.
* Fix whitepsace in EXAMPLES block.
* Set module changed status according to operation performed.
* Added support to Datacenter resources in HPE OneView
* Adjusting comments in oneview_datacenter_facts
* Adding no_log on the documentation
* Using Pytest to Oneview DatacenterFactsModule tests
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
Fix CI failure
Fix unit test failure
Fix review comments
* Adding RPC attribute arguments to `junos_rpc` network module.
* Specifying module argument version.
* Fixing DOCUMENTATION block.
* First attempt at new test fixture.
* Updated RPC_CLI_MAP.
* Use `result` instead of `reply`.
This module can be used to manage guests on a vCMP provisioned BIG-IP.
vCMP is a hardware-only feature, therefore this module cannot be used
on the VE editions of BIG-IP.
* move set_module_args to units.modules.utils
* unit tests: reuse set_module_args
* unit tests: mock exit/fail_json in module.utils.ModuleTestCase
* unit tests: use module.utils.ModuleTestCase
* unit tests: fix 'import shadowed by loop variable'
* Adding git_command module and its UT file
* Changing Author Name and removing 2 blank lines
* Removing blank lines
* Adding enos_config and its UT files
* Removing config module as I am allowed to have only module per PR
* Work on Ganesh's Review comments
* John Review Comments on enos_command.py
* Review comments of John
* Add mtu option nxos_interface feature idea
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add unit test for mtu feature
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Squashing all commits to one as suggested by John
* Adding Unit test method for the module enos_facts.py
* Pep8 and Ylint issues addressed
* Trying again to remove blank line. Some scripts are required for this.
* Bug Fixing for interfaces
* Editing for over indenting issue
* E203 whitespace before ','
* Update enos.py
Added warnings argument as to check_args method
* Update enos_facts.py
Added warnings to check_args method
* When getting the stack events we need to consider the case where we don't have ClientRequestToken fixes#32396
* Adding tests for the case when the ClientRequestToken is not present in the stack creation.
* Renaming the stack that the test for Client Request Token requires so it won't cause collisions with the basic test.
* Add some tests for iptables
* Fix remove bug (calls 2 times check to remove a chain)
* Add me as maintainer
* Fix PEP8
* Doc: Give more information on issue #18988
* Fix#18988 and test it
* Fix doc (thanks Pillou)
* enable PEP8 check for iptables
This patch addresses a number of issues, large and small, that were
identified by users in the downstream repo.
* formatting of some code
* specific option combinations leading to errors
* missing includes for unit tests
* ios_logging: Fix typo in documentation
* ios_logging: Fix traceback when setting buffered destination without size
When the size parameter is not configured while configuring the buffered
destination, a traceback occurs due to the fact that validate_size expects the
parameter to be an int. Explicitely converting value to int makes the
check work for every case.
* ios_logging: Update size parameter documentation
Update the documentation of the size paramter to reflect the current behaviour
of setting a default of 4096 for the buffered dest.
* ios_logging: Add unit test
Add unit test for ios_logging testing the behaviour clarified in the previous
commits.
* ios_logging: Fix python 2.6 compliance
This module's purpose is to specifically manage the ssl keys. It
is essentially the key component of the bigip_ssl_certificate module.
The modules were separated and the key portion deprecated from
bigip_ssl_certificate in favor of this module.
* - Adds iosxr_netconf module to configure netcong service on Cisco
IOS-XR devices
* - Adds Integration test for module
- Handles diff return from load_config
* - Adds unit test for iosxr_netconf module
* Start using ClientRequestTokens in event lists
* Include request token in all reqs that support it (basically all but check mode/changeset)
* Update placebo recordings
* Add comments for CRQ popping
Module allows you to wait for a bigip device to be
"ready" for configuration. This module will wait for things like
the device coming online as well as the REST API and MCPD being
ready.
If all of the above is not online and ready, then no configuration
will be able to be made.
In this refactor we moved to the most recent coding standards for
both F5 and Ansible. Many bugs were fixed and some features were
also added (such as ipv6 support).
New conventions for ansible warrant fixes to accomodate those
in bigip_partition.
This patch also includes an import fix that can raise an error when
Ansible unit tests run
* documentation was not inline with other Ansible modules
* Python 3 specific imports were missing
* monitor_type is no longer required when creating a new pool; it is now the default.
* A new monitor_type choice of "single" was added for a more intuitive way to specify "a single monitor". It uses "and_list" underneath, but provides additional checks to ensure that you are specifying only a single monitor.
* host and port arguments have been deprecated for now. Please use bigip_pool_member instead.
* 'partition' field was missing from documentation.
* A note that "python 2.7 or greater is required" has been added for those who were not aware that this applies for ALL F5 modules.
* Unit tests were fixed to support the above module
* Adding a cli transport option for the bigip_command module.
* Fixing keyerror when using other f5 modules. Adding version_added for new option in bigip_command.
* Removing local connection check because the F5 tasks can be delegated to any host that has the libraries for REST.
* Using the network_common load_provider.
* Adding unit test to cover cli transport and updating previous unit test to ensure cli was not called.
* Fix rollback in junos_config
Fixes#30778
* Call `load_configuration` with rollback id in case
the id is given as input
* Pass rollback id to `get_diff()` to fetch diff from device
* Fix unit test
* Added support to retrieving LIG resources in HPE OneView
* Fixing copyright header according to review
* Swapping out config for full credentials in parameter for documentation
* Added support to retrieving Enclosures in HPE OneView
- Added unit tests
* Updated version_added to 2.5
* Changing return type of enclosure_script to string
* Fixing copyright header according to review
* Replaced config for credentials in parameters for documentation
* Fix nxos provider transport warning issue
* Add default value of transport arg in provider spec
* Remove default value if transport arg in top level spec
This ensure deprecation warning is seen only in case transport
is given as a top level arg in task
* Refactor nxos modules to reference transport value from provider
spec
* Fix unit test
* Remove transport arg assignment in nxos action plugin
* As assigning transport value is handled in provider spec
top level task arg assignment is no longer required
* Add Routing Engine Facts
- Map routing engine output information to routing_engines facts dict.
- Add fact 'has_2RE', which is a quick way to determine how many REs
the chassis has.
* Fix a typo
* Fix more typos
* Add slot number to routing_engine dict
* Add facts about the installed chassis modules
* Fix typo
* Fixed another typo
* Fix Path
* Change path again.
* More Typos
* Add some deubgging
* Add additional information for hardware components.
- Return information about the Routing Engines.
- Return a fact to easily determine if the device
has two routing engines.
- Return information about the hardware modules.
* Addressed pep8 stardard failures.
* Add unit test fixtures.
* Rename fixture.
* Fix unit test failures.
- Rename the fixture file to what the unit test expects.
- Strip out junos namespace attributes.
Rename file to match what the unit test expects.
* Scrubbed the routing engine serial numbers.
* Add unit test facts for new tests.
- Add unit test for ansible_net_routing_engines fact
- Add unit test for ansible_net_modules fact
- Add unit test for ansible_net_has_2RE
* Fixed spacing.
Unittests are sometimes run without network connectivity in build
systems. Make that work correctly by mocking out _get_url_data with the
expected return value.
* module should fail if eos_user is added without configured_password or nopassword or sshkey
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* fix eos_user unit test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* fix eos_user integration test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add FcoeNetworkFactsModule for retrieving HPE OneView FCoE Networks
- Allow querying for FCoE Network resources in HPE OneView
- Adds unit tests to new module
* Fix "required: no"
* Add NetworkSetFactsModule for retrieving HPE OneView Network Sets
- Allow querying for Network Set resources in HPE OneView
- Adds unit tests to new module
- Updates oneview_module_loader copyright header to short GPL3 version
* Adding possibility to pass in credentials as parameters
* Removed required false and changed format of filter_by_name declaration
* Updated examples in docs to reflect new way to pass in credentials
- All examples of the oneview_network_set_facts updated to use
credential parameters
- All required=False from oneview base module removed
- Shared docs updated to bring attention to API version being used
* Add the ability to modify shard count to kinesis_stream module
* Fixed an issue in kinesis_stream where update() reports not changed when it is changed
* Remove unreachable message and make the try and catch block shorter
* Tidy mount module for testing
Fix spelling mistakes in comments. I *think* the example for omitting parents
root has the wrong parent ID.
Make mountinfo file a parameter for testing.
* Don't strip leading slash from mounts
The current code does not follow the example, it produces src=tmp/aaa instead
of src=/tmp/aaa. This causes problems with bind mounts under /rootfs.
* Use dictionary to store mounts by ID
Instead of looping over each one to check if the ID matches. This does not
preserve the order of the output on < Python3.6, but that is not necessary.
* Make linux_mounts a dict
Always accessed by 'dst', so avoid looping by just making it a key.
* Add test case for get_linux_mounts
- Fixes to lambda
- reformatting + tests for lambda_facts
- lambda module integration test
- switch lambda and lambda_facts to AnsibleAwsModule
- Get the account ID from STS, GetUser, and finally error message
* Added FcNetworkFactsModule to query FC Network Resources in HPE OneView
- Added unit tests
* Removing unnecessary quotes from example and documentation
* Module for uploading templates into vDirect server
Module for uploading configuration and workflow templates
into Radware vDirect server
* Module for uploading templates into vDirect server
Module for uploading configuration and workflow templates
into Radware vDirect server
* Add VPN module and unittests
* remove unnecessary imports
* fix documentation
* raise custom exception rather than passing module everywhere
* remove recordings
Rerecord tests
Fix docs
Ensure vpn_connection_id is a list of strings when checking if it exists
* fix check mode
* Rerecord tests
* remove superfluous code and comments and make exception handling uniform
fix docs
* Fix ec2_vpc_vpn documentation
* make ec2_vpc_vpn compatible with python 2.6 and make check mode logic more succinct
* fix comparison of list of dicts
* Fix typos and docstrings
make requested changes for imports
make code clearer
* Fix copyright and metadata version.
* Adding module to manage ethernet network on HPE OneView
* Adding unit tests to EthernetNetwork module
* Added OneViewModuleException custom exceptions to module
- Removed exception imports from hpOneView
- Updated unit tests
* Fixing mock import inside ethernet network module unit test
* Fixing issues found in METADATA by CI
* Updated paths to use solution name instead of vendor name
* Fixed documentation, removed redundant if and improved readability
* Updated _bulk_present to use and return `result`, same way as _present
* Changed __ to _ in private methods following ansible style
* Fixed some example inconsistencies and turned states doc into a list
* Added adriane-cardozo to list of maintainers
* New module for AWS Direct Connect connections
Unittests for new module
Added utils that will be used by other Direct Connect modules
* pep8 fixes
* Correct aws_direct_connect_connection EXAMPLES to be valid yaml
* Make requested changes
* remove use of the variable changed
get rid of unnecessary parentheses
* Fix unit test
* Rename variable.
* Fix metadata version
* Add module_utils/aws/direct_connect.py for frequently used functions
* new AWS Direct Connect link aggregation group module with tests and placebo recordings
* remove extra argument
* Remove use of undefined var
* Fix param name for extra exception codes for AWSRetry to use.
* Fix undefined var and line length and metadata version number
* Fix copyright headers
* Added new oneview_fcoe_network module and unit tests
* Fixing metadata issues and importing unittest from ansible.compat.tests
* Fixing shebang and adding correct copyright header
* Renamed remote_management/hpe to remote_management/oneview
* Updated documentation and default state according to review comments
- Added present as the default state
- Added delegate_to: localhost in all examples
- Changed config path from a variable to illustrate a location
- Other documentation fixes
* refactors nxos_vrf_af module
fixes#27595
* fix up unit test cases
* add commands to result dict
* add route-target on afi create
* adds deprecation note to safi argument
* Ansible Config part2
- made dump_me nicer, added note this is not prod
- moved internal key removal function to vars
- carry tracebacks in errors we can now show tracebacks for plugins on vvv
- show inventory plugin tracebacks on vvv
- minor fixes to cg groups plugin
- draft config from plugin docs
- made search path warning 'saner' (top level dirs only)
- correctly display config entries and others
- removed unneeded code
- commented out some conn plugin specific from base.yml
- also deprecated sudo/su
- updated ssh conn docs
- shared get option method for connection plugins
- note about needing eval for defaults
- tailored yaml ext
- updated strategy entry
- for connection pliugins, options load on plugin load
- allow for long types in definitions
- better display in ansible-doc
- cleaned up/updated source docs and base.yml
- added many descriptions
- deprecated include toggles as include is
- draft backwards compat get_config
- fixes to ansible-config, added --only-changed
- some code reoorg
- small license headers
- show default in doc type
- pushed module utils details to 5vs
- work w/o config file
- PEPE ATE!
- moved loader to it's own file
- fixed rhn_register test
- fixed boto requirement in make tests
- I ate Pepe
- fixed dynamic eval of defaults
- better doc code
skip ipaddr filter tests when missing netaddr
removed devnull string from config
better becoem resolution
* killed extra space with extreeme prejudice
cause its an affront against all that is holy that 2 spaces touch each other!
shippable timing out on some images, but merging as it passes most
* replace boto with boto3 for the s3 module
make s3 pep8 and remove from legacy files
fix s3 unit tests
* fix indentation
* s3 module - if we can't create an MD5 sum return None and always upload file
* remove Location.DEFAULT which isn't used in boto3 and tidy up the docs
* pep8
* s3: remove default: null, empty aliases, and required: false from documentation
fix incorrectly documented defaults
* Porting s3 to boto3. Simplify some logic and remove unused imports
* Fix s3 module variables
* Fix a typo in s3 module and remove from pep8 legacy files
* s3: add pagination for listing objects.
Fix logic and use head_object instead of get_object for efficiency.
Fix typo in unit test.
* Fix pagination to maintain backwards compatibility.
Fix incorrect conditional.
Remove redundant variable assignment.
Fix s3 list_object pagination to return all pages
* Use the revised List Objects API as recommended.
* Wrap call to paginated_list in a try/except
Also remembered to allow marker/prefix/max_keys to modify what keys are listed
* Simplify argument
* nxos_bgp_neighbor_af does not want required_together
* fixup tests
* Fix max_prefix_* issues
* Require address-family
* Fix idempotency for next_hop_third_party
* Fix idempotency for allowas_in*
* Fix idempotency for *_in and *_out
* Reorder command generation again
`default` is first, then `max-prefix`, then booleans
Fix 'module' object is not callable
* rhn_register: fix Python 3 compatibility
* rhn_register: update requirements
* rhn_register: add unit tests
* Add missing method name
* use a dedicated line for XML related requirements
* rhn_register: drop support for Python 2.4
* rhn_register unit tests: fix Python 3 compatibility
* refactor in order to check order of the requests
* s3_bucket: fix policy sorting for python3 so strings are evaluated as less than tuples.
Add tests to ensure this behavior is maintained.
* Fix s3_bucket comparison function to work on both Python 3.5 and 3.6
* s3_bucket: document that cmp_to_key is used for python 2.7.
Add another test for s3_bucket to compare policies of different sizes.
* fix pep8
* Work around code-smell grepping by not using the word 'cmp'.
* New module for managing AWS Datapipelines
* Supports create/activate/deactivate and deletion
* Handles idempotent creation by embeding the version in the
uniqueId field
* Waits for requested state to be reached, as Botocore doesn't
have waiters yet for datapipelines
* rename module, fix imports, add tags option, improve exit_json results, fix a couple bugs, add a TODO so I don't forget
fix pep8
allow timeout to be used for pipeline creation
make .format syntax uniform
fix pep8
fix exception handling
allow pipeline to be modified, refactor, add some comments, remove unnecessary imports
pipeline activation may not be in the activated state long
remove datapipeline version option
change a loop to a list comprehension
create idempotence by hashing the options given to the module minus the objects (which can be modified)
small bugfix
* data_pipeline unittests
make unittests pep8
fix bug in unittests
* remove exception handling that serves no purpose
* Fix python3 incompatibilities in datapipeline tests and add placebo fixture maybe_sleep for faster tests
Fix python3 incompatibilities in data_pipeline build_unique_id()
Don't delete a pipeline in diff_pipeline() because it's unexpected
Don't use time.time() because it causes an issue with placebo testing
re-recorded tests
fix pep8 in data_pipeline
Remove disable_rollback from tests
Make sure unique identifier is a string
re-record tests
* improve documentation and add another example
* use a placebo fixture instead of redundant code in tests
fix tests for PLACEBO_RECORD=false
* Fix data_pipeline docs
use isinstance instead of type()
fix documentation
* fix documentation
* Remove use of undefined variable from data_pipeline module and fix license
* fix copyright header
* Initial commit for integration of HPE OneView resources with Ansible Core. Adding FC Network and FC Network Fact modules and unit tests, and OneView base class for all OV resources.
* Add module cv_server_provision for integration with Arista CloudVision Portal.
* Doc update.
* Remove shebang from test file. Update short description with company and product name.
* Update exception syntax to Python3 style.
* Remove blank line between imports.
* Remove newlines from RETURN documentation.
* Add cvprac to unittest requirements.
* Update unittest format. Add a few additional tests.
* Mock exceptions from cvprac so the library is not needed for unittests.
* Mock cvprac imports.
* Update unit tests to support python 3.5.
* Mock full cvprac library for unittests.
* Update Jinja2 import to pass updated CI checks.
* Update cvprac imports format for new CI tests.
* Add __metaclass__ and __future__.
* Added new module interfaces_file
* interfaces_file: added unit tests
* interfaces_file: added golden files for unit tests
* interfaces_file: moved to system modules
* interfaces_file: fixed code formatting and convention issues
* ACI module_utils library for ACI modules
This PR includes:
- the ACI argument_spec
- an aci_login function
- an experimental aci_request function
- an aci_response function
- included the ACI team
* New prototype using ACIModule
This PR includes:
- A new ACIModule object with various useful methods
Zhikang Zhang