* Enabled support for configuration template configuration
- get_nets() now pulls down templates and networks
- A few changes in VLAN and network to operate as a POC
* Ansibot changes
- Fix undefined variable
- Document net_id in meraki_vlan
* Fix indentation
- Before this, it allowed claiming devices into a network only
- Make integration tests a block
- Note, API doesn't allow unclaiming in an organization, only net
- Added an integration test for claiming into an org
- Requires unclaiming manually
- There is a bug in the API which isn't showing claimed devices
* Fix tmpdir on non root become
- also avoid exception if tmpdir and remote_tmp are None
- give 'None' on deescalation so tempfile will fallback to it's default behaviour
and use system dirs
- fix issue with bad tempdir (not existing/not createable/not writeable)
i.e nobody and ~/.ansible/tmp
- added tests for blockfile case
* Revert "Temporarily revert c119d54"
This reverts commit 5c614a59a6.
* changes based on PR feedback and changelog fragment
* changes based on the review
* Fix tmpdir when makedirs failed so we just use the system tmp
* Let missing remote_tmp fail
If remote_tmp is missing then there's something more basic wrong in the
communication from the controller to the module-side. It's better to
be alerted in this case than to silently ignore it.
jborean and I have independently checked what happens if the user sets
ansible_remote_tmp to empty string and !!null and both cases work fine.
(null is turned into a default value controller-side. empty string
triggers the warning because it is probably not a directory that the
become user is able to use).
* Update eos cliconf plugin methods
* Refactor eos cliconf plugin
* Changes in eos module_utils as per cliconf plugin refactor
* Fix unit test and sanity failures
* Fix review comment
* aws_eks_cluster: Improve output documentation
This data is already returned by the module, it just wasn't documented. These
fields are required for accessing the created Kubernetes API with e.g. the
k8s_raw module.
* aws_eks_cluster: Add wait functionality
This enables further cluster configuration once it's created and active.
20 minutes was chosen as an arbitrary default, so that if it takes longer than
the documented "usually less than 10 minutes" it's still likely to succeed.
* Correct security group name in aws_eks tests
* Improve teardown of aws_eks tests
Fix minor teardown issues. The `pause` step is a placeholder until
a waiter for `state: absent`
* Add execution_role_arn parameter
* Change ecs_taskdefinition to use AnsibleAWSmodule
Botocore version checking is becomming more common. Changing the ecs_taskdefinition
to use AnsibleAWSmodule allows more easily for this.
* Change launch type check to use botocore_at_least function
* Remove execution_role_arn param from params dict
* Change check to use parameter
* Fix typo
* Add test for old botocore version
* Add test for execution role parameter
* Remove iam_role_facts task
Task was unecessary. The same information could be gathered by registering
the iam_role task.
* Check for HTTP status code
- All requests now check returned status code
- Fail if status code isn’t what is expected
* Fix blank line error
* Change HTTP check logic and improve integration tests
- Set HTTP status code check so default path is accept
- Added create and delete network for integration test
- Remove a few comments to clean up code
* Revert "Account for empty string regexp in lineinfile (#41451)"
This reverts commit 4b5b4a760c.
* Use context managers for interacting with files
* Store line and regexp parameters in a variable
* Add warning when regexp is an empty string
* Remove '=' from error messages
* Update warning message and add changelog
* Add tests
* Improve warning message
Offer an equivalent regexp that won't trigger the warning.
Update tests to match new warning.
* Add porting guide entry for lineinfile change
* Fix bug with redundancy templates and add integration tests for redundancy templates.
* vlan_list absent state support and fix for vlans as strings in vlan_list
* Issue #39860: Add 'not_contains' method to parsing.py
* Issue #30860 Adds self.negate to Conditional class in lib/ansible/module_utils/network/common/parsing.py
* Issue #39860 Fix singleton-comparison issue per sanity tests
* Issue #39860 'test/integration/targets/nxos_command/tests/cli/not_comparison_operator.yaml' integration test
* Issue #39860 Add unit tests to '../../test/units/module_utils/network/common/test_parsing.py'
* Issue #39860 Fix singleton comparison issue
* Fix E302 expected 2 blank lines, found 1
* Issue #39860 Add license header to unit tests
* Issue #39860 Move integration test to 'test/integration/targets/nxos_command/tests/common/'; remove unnecessary comment from unit test
* Issue #39860 remove unnecessary comment from unit test
* refactor win_group_membership to use SIDs for comparisons instead of name parsing
* carry over previous doc cleanup changes
* remove trailing whitespace from docs
* If we evaluate task.loop/with_items when calculating delegate_to vars, cache the items. Fixes#28231
* Add comments about caching loop items
* Add test for delegate_to+loop+random
* Be more careful about where we update task.loop
* runas + async - get working on older hosts
* fixed up sanity issues
* Moved first task to end of test for CI race issues
* Minor change to async test to be more stable, change to runas become to not touch the disk
* moved async test back to normal spot
* Use context managers for interacting with files
* Account for empty string as regexp
Rather than explicitly testing for None, also test for an empty string which will evaluate to False. An empty string regexp matches every line, which ends up replacing the incorrect line.
* Store line parameter in a variable
* Add tests
If a line match is found in the file and no regexp is specified, insertbefore would improperly try to add a line if set to BOF.
Add tests for this scenario.
* fix: exclude using wildcards for tar archives
Fixes#37842, #22947
* fix: Remove quote() as it munges the exclude format
* test: Refactor to use single archive structure
A common structure archived by different methods should simplify some of
the feature tests.
* test: Use common archive layout to validate exclude feature
* test: Use the same exclude checks for zip/tar archives
* Initial commit for meraki_switchport module
- Query or modify swichport configurations
- Further optimizations are available
- Integration tests will require manual editing of file for others
* Remove blank lines
* Implement configuration template management
- Queries or removes templates
- Can bind or unbind templates to networks
- Module is idempotent only for binding and unbinding
- Meraki does not allow template creation via API
- Integration test is tedious b/c previous bullet point
- Fixed bug in construct_path() so it won't set self.function
* PEP8 changes
* Re-enable some integration tests, use variables, and fix broken code
* Initial commit of meraki_vlan module
- Create, delete, modify, and query VLANs within a network
- Support for all allowed objects in the VLAN data structure
- Meraki defaults networks to have VLANs disabled and there is no
way to use the API to enable VLAN support. It must be enabled
manually.
* Fix formatting error in documentation
* Formatting changes and added documentation
* PEP8 fix
* Initial commit for meraki_device module
- Allow claiming, removal, updating, and querying of devices
- Integration tests are included
- Integration tests are not complete because physical gear is required
- Integration tests also require Meraki subscriptions
* Added support for serial number query without network
* Added support for net_id and net_name
* Changes recommended by ansible-test for PEP8 and documentation
* Remove duplicate state in example
* Fix typo
* When using ANSIBLE_JINJA2_NATIVE bypass our None filtering in _finalize. Fixes#41392
* Add tests for _finalize bypass
* Address python3 failures in tests
* pip tests: remove trailing spaces
* pip tests: use Jinja tests
* fixup! pip tests: remove trailing spaces
* pip tests: use 'command' instead of 'shell' module
* pip tests: remove unused variable
* pip tests: use a package with fewer dependencies
sampleproject has one dependency: 'peppercorn' and peppercorn doesn't
have any dependency.
* pip tests: check that 'name' param handles list
* pip: squash package parameters
Note that squashing will be removed in 2.11, new code should directly
use a list with the 'name' parameter.
* VMware: Allow user to select disk_mode
This fix allows user to select disk modes for given disk configuration
in the given VM.
Fixes: #37749
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Review comments
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Don't ignore a duplicate host for an already processed include, assume that the repetition indicates a new include. Fixes#40317
* Add intg tests to ensure duplicate items in loop are not deduped
* Add note about relative indexing
* Test case for missing permissions
* Update aws_s3 module to latest standards
* Use AnsibleAWSModule
* Handle BotoCoreErrors properly
* Test for BotoCoreErrors
* Check for XNotImplemented exceptions (#38569)
* Don't prematurely fail if user does not have s3:GetObject permission
* Allow S3 drop-ins to ignore put_object_acl and put_bucket_acl
* aws_eks: New module for managing AWS EKS
aws_eks module is used for creating and removing EKS clusters.
Includes full test suite and updates to IAM policies to enable it.
* Clean up all security groups
* appease shippable
* Rename aws_eks module to aws_eks_cluster
* Changed request() to run json.loads() instead of module doing it
- Removed json.loads() from modules
- Removed some unreliable integration tests
- Removed self.function setting in construct_path()
-
* PEP8 changes
* Remove debug line for push
* leave vmware_guest_powerstate tests enabled, but revert changes from: 66743f33
* leave VM poweroff tests enabled, but revert changes from: 87d6bdaf
* bumped 'vcenter-test-container' version to '1.3.0'
* updated test task names based on PR feedback
* Allow the use of 'aws:kms' as an encryption method
* Allow the use of a non standard KMS key
* Deduce whether AWS Signature Version 4 is required rather than specifying with a parameter
The compute policy was exceeding maximum size and contained
policies that already exist in ecs-policy.
Look up suitable AMIs rather than hardcode
We don't want to maintain multiple image IDs for multiple regions
so use ec2_ami_facts to set a suitable image ID
Improve exception handling
Fargate instances do not require memory and cpu descriptors. EC2 instances
do require descriptions. https://botocore.readthedocs.io/en/latest/reference/services/ecs.html#ECS.Client.describe_task_definition
Fargate requires that cpu and memory be defined at task definition level.
EC2 launch requires them to be defined at the container level.
Fargate requires the use of awsvpc for the networking_mode. Also updated,
the documentation regarding where and when memory/cpu needs to the assigned.
The task_definition variable for the awspvc configuration colided with
the ecs_service for the bridge network. This would cause the test to fail.
Add testing for fargate
Add examples for fargate and ec2
When using an empty string as the version argument, the module would
before attempt to run something akin to:
pip install module==""
This changes the behavior to:
pip install module
Fixes#41043
* Updating tower_job_template.py
* tower_job_template: Update parameter version_added to 2.7
* Ensure that unset credentials aren't passed
Passing empty strings for unset credentials causes ValueErrors as
the API expects an integer. Don't pass unset credentials
* tower_inventory_source: Add support for the inventory source via ansible-tower-cli.
* Add test coverage for tower_inventory_source.
* Update version_added to 2.7
* diff in as-path-set or prefix-set
* fix caveat diff can not have last line with comma in prefix-set/as-path/community-set
* Simplify fix to include indentation before parse
* remove debugger
* route-policy diffs
* fix iosxr_config crash issue
* new changes in iosxr_config after git add
* end-policy-map and end-class-map are properly indented so match misplaced children only when end-* is at the beigining also fix pep8
* Remaining config blocks of route-policy which needs exclusion from diff. added new tests
* pylint/pep8 warnings
* Review comments , sanity test fix
* shbang warning
* remove unused import
* Fix test-module failing to validate args
The test-module pass a wrong argument _ansible_tmp cause the validation failed.
Change the argument _ansible_tmp to _ansible_tmpdir to fix this.
* Add a integration test for test-module.
Prior to this change, we don't have a test for test-module.
This change ensure the correctness of test-module script.
* Support 'apply' to apply attributes to included tasks
* Cannot validate args for task_include
* Only allow apply on include_
* Re-enable arg validation, but only for include_tasks and import_tasks
* s/task/ir/
* Add tests for include_ apply
* Include context with AnsibleParserError
* Add docs for apply
* version_added
* Add free-form documentation back
* Add example of free-form with apply
* First pass at a src parameter that can be used in place of body. Supports binary files
* Add test for uri src body
* Bump version_added to 2.6
* Close the open file handle
* Add uri action plugin that handles src/remote_src
* Document remote_src
* Remove duplicate info about remote_src
* Bump version_added to 2.7
* Fixes ios_logging idempotency issues
* Added intergration tests & minor fixes
* Minor fixes in tests
* Minor fixes in tests #2
* eos_logging fixes after PR review
* Move k8s modules to dynamic backend
* update required openshift version
* update -> patch
* use new dynamic client exceptions
* style
* guard urllib3 import
* guard ansibleerror import
* give more information about error cause
* format in variable
* style
* rename tests
* Search for provided kind in a few more places to match old behavior, properly handle failure
* make common code use fail instead of fail_json, to work for lookup plugins as well
* update docs
* move openshift_raw tests into k8s tests
* fix typo
* Use diff of response and resource to determine change, don't do any checking client-side before making requests
* remove duplicate yaml blocks
* Update porting guide for k8s module
* remove invalid doc refs
* If fuzzy searching finds a resource, update resource_definition to match proper kind and version
* remote unsupported openshift_raw variables
* properly check environment variables when determining auth method:
* Remove 1.1.1.1 from *_config tests
* remove from *_smoke and *_system
* Miscellaneous other tests
* Remove from module documentation as well
* Remove from unit tests as well
* Remove accidental duplication from rebase
* Return the expected prompt character based on become status
* Update eos_banner tests for eapi
* Update eos_config tests for eapi
* Update eos_facts tests for eapi
* Update eos_interface tests for eapi
* Update eos_l3_interface tests for eapi
* Update eos_lldp tests for eapi
* Update eos_logging tests for eapi
* Update eos_smoke tests for eapi
* Update eos_system tests for eapi
* nxos_vlan fix
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* uncomment mode test as nxapi now has get_capabilities
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add nxos_install_os integration tests
* Update call to check timers
* Update check_ansible_timer method
* Modify network_cli integration tests
* Add timer check for nxos_install_os
* Add comments for clear_persistent_sockets
* Update connection info for tests
* More updates
* Restructure files for provider and non-provider testing
* Update env var name and add check for ISSU switchover
* Add support for `mysqldump`'s `--ignore_table` switch.
* Fix documentation and default linter warning re: default parameter
* Add number to replacement field in cmd string
* Bump version_added to 2.7
* Initial commit for meraki_admin module
* Initial commit for meraki_snmp module
* Update code to be operational for SNMP settings
- Add optional_ignore value to is_update_required for one-time fields
- Write documentation
- Perform checks and execute changes
* Minor fixes and test improvements
- Fix some documentation errors
- Implement and test for idempotency
* Removed meraki_admin which shouldn't be there, ansibot changes
* Rename params to be lower case
- Updated integration tests
- Changed CamelCase to lowercase and underscore
* Code cleanup changes based on comments from Dag.
* Port aws_ses_identity module to use AnsibleAWSModule
* Support Check Mode in aws_ses_identity
* Add tests for check mode
* Move feedback forwarding parameter check to before any changes are made.
* Fixed check_mode status to be the same as normal execution
* Now when setting the status to `disabled` in check_mode it correctly
returns the state changed and prints a warning like it does in normal
model. Before it always returned changed even if everything was set
correctly and a reboot was required.
* Add changelog entry
Co-authored by: Strahinja Kustudic <kustodian@gmail.com>
* Added interpreter parameter to the script module
* Let required and default parameters get documented implicitly for binary parameter
* Renamed interpreter parameter to executable
* The module now correctly sets the timezone in both the config file and
in /etc/localtime; while hwclock is set in both the config and
/etc/adjtime.
* Module checks if the timezone is actually set by checking
/etc/localtime. Before it only checked if it was set in the config file.
* Fixed module not setting the timezone on RedHat systems if
/etc/localtime was a symbolic link.
* Fixed module failures in case of missing config files or incorrect data
in them.
* Added a lot of integrations tests to cover most of these situations.
* cs_instance: implement host migration support
* fix build
* fail fast on update if user is not admin
* improve tests a bit
* expunge it
* fix typo
* disable temporarly verify for host on starting instance.
* Fix errors decrypted non-ascii vault vars
AnsibleVaultEncryptedUnicode was just using b"".decode()
instead of to_text() on the bytestrings returned from
vault.decrypt() and could cause errors on python2
if non-ascii since decode() defaults to ascii.
Use to_text() to default to decoding utf-8.
add intg and unit tests for value of vaulted vars
being non-ascii utf8
based on https://github.com/ansible/ansible/issues/37258Fixes#37258
* yamllint fixups
* Adding module for AWS Config service
* adding integration tests
* Split resource types into their own modules
* Properly use resource_prefix and retry on IAM "eventual consistency"
* Add config aggregator module
* AWS config aggregator integration test fixes
* AWS config recorder module
* Config aggregation auth rule
* Use resource_prefix in IAM role name
* Disable config tests
* Fix setting the cache when refresh_cache or --flush-cache are used
* Use jsonify function that handles datetime objects in jsonfile cache plugin
* Don't access self._options directly
* Add initial integration tests for aws_ec2 inventory plugin
* Add CI alias
* Fix and add a few more unit tests
* Add integration tests for constructed
* Fix typo
* Use inventory config templates
* Collect all instances that are not terminated by default
* Create separate playbook for setting up the VPC, subnet, security group, and finding an image for the host
Create a separate playbook for removing the resources
* Allow easier grouping by region and add an example
* use a unified json encode/decode that can handle unsafe and vault
* Refactor ec2_group
Replace nested for loops with list comprehensions
Purge rules before adding new ones in case sg has maximum permitted rules
* Add check mode tests for ec2_group
* add tests
* Remove dead code
* Fix integration test assertions for old boto versions
* Add waiter for security group that is autocreated
* Add support for in-account group rules
* Add common util to get AWS account ID
Fixes#31383
* Fix protocol number and add separate tests for egress rule handling
* Return egress rule treatment to be backwards compatible
* Remove functions that were obsoleted by `Rule` namedtuple
* IP tests
* Move description updates to a function
* Fix string formatting missing index
* Add tests for auto-creation of the same group in quick succession
* Resolve use of brand-new group in a rule without a description
* Clean up duplicated get-security-group function
* Add reverse cleanup in case of dependency issues
* Add crossaccount ELB group support
* Deal with non-STS calls to account API
* Add filtering of owner IDs that match the current account
* New module = AWS Glue connection
* Add a few initial integration tests
* Add alias for CI
* module rename
* finish module rename
* add loop when getting glue connection again so we dont get None
* Limit number of retries to get new glue connection info
* New ansible module netconf_rpc
* add integration test for module netconf_rpc
* pep8/meta-data corrections
* usage of jxmlease for all XML processing
separation of attributes "rpc" and "content"
* removed unused imports
improved error handling
* fixed pep8
* usage of ast.literal_eval instead of eval
added description to SROS integration test for cases commented out
* mismatch type between function arguments
* add testcase for prompt
* yamllint issues
* remove overwriting response in case of connectionError exception
* remove import of ConnectionError as it is not required
* add loadbalancer
* dict check nullable
* add default vallue when get list
* create backend addr pool
* fix the set
* fix to dict
* fix ideponement
* use param security group name when create
* nic can has no nsg
* add test
* fix
* fix
* fix
* add document
* add configuration
* fix
* fix
* remove all resources
* fix
* fix test
* add version added
* fix lint
* fix lint
* Fixes some NIC bugs (#39213)
* add loadbalancer
* dict check nullable
* add default vallue when get list
* create backend addr pool
* fix the set
* fix to dict
* fix ideponement
* use param security group name when create
* nic can has no nsg
* add test
* fix
* fix
* fix
* fix idemponet
* add document
* fix test
* add configuration
* fix
* fix
* remove all resources
* fix
* fix test
* add version added
* fix lint
* fix lint
* fix lint
* remove new feature and only submit bugfix
* remove useless test
* fix
* fix indent
* Update azure_rm_networkinterface.py
* fix comment
* support 3 types to specific name and resource group
* avoid test racing
* fix test
* add sample
* add resource id test
* win_updates: add scheduled tasks back in for older hosts
* Fixed up typo in category name error message
* Fixed up some minor issues after merge
* added changelog fragment
* Default to become but add override to use scheduled tasks
* Added basic unit tests for win_updates
* fix minor typos
* Return messages generated from edit_config to module
* This does not seem to work that way
* Change test IP addresses to not conflict with device config
* Set encrypted as default and fix empty password reporting changed
* Starting with Postgres 10 `UNENCRYPTED` passwords are removed and
because of that this module fails with the default `encrypted=no`.
Also encrypted passwords are suported since version 7.2
(https://www.postgresql.org/docs/7.2/static/sql-createuser.html) which
went EOL in 2007 and since 7.3 it is the default. Because of this it
makes a lot more sense to make `encrypted=yes` the default. This won't
break backward compatibility, the module would just update the user's
password in the DB in the hashed format and everything else will work
like before. It's also a security bad practice to store passwords in
plain text. fixes#25823
* There was also a bug with `encrypted=yes` and an empty password always
reported as changed.
* Improved documentation for `encrypted`/`password` parameters, and
removed some obsolete notes about passlib.
* Fix clearing user's password to work with all versions of Postgres
* Add tests for clearing the user password
* Fix documentation atfer rebase
* Add changelog fragment
* I seem to have forgotten the back half of tests
* Set http timeout from persistent_command_timeout
* Tweak URL generation and provide URL on error
* Push var_options to connection process
* Don't wait forever if coming from persistent
* Don't send the entire contents of variables to ansible-connection
* Fix all cases with pause and ctrl+c
- naked:
- pause:
- with prompt
- pause: prompt=hi
- time wait
- pause: seconds=60
- time wait with prompt
- pause: seconds=60 prompt=hi
Fixes#35372
* Use curses to control stdout
* Use curses to clear lines on interactive input
* Validate input for echo parameter and fail nicely if invalid
* Add integration tests for pause module using pexpect
* Use try except when trying to determine erase sequence to account for lack of TTY in containers in tests
* Improve output validation for regular paus test
* Accept two digit precision for pause length in test
* Check for seconds when seconds is specificed, minutes when minutes is specified
* Add test for no TTY mode
Co-authored by: Toshio Kuratomi <a.badger@gmail.com>
Co-authored by: Brian Coca <brian.coca+git@gmail.com>
* Add the ability to specify an install_dir to the gem module
* Add GEM_HOME when installing a non-global gem
* Add tests for custom gem path
* Fix sanity tests
* Add changelog entry
* Rebase and add tests for incorrect options
Co-authored by: Antoine Catton <devel@antoine.catton.fr>
* * Memset:
* module_utils and associated documentation.
* module to manage DNS zones.
* integration tests to run against Memset's API.
* * memset.py:
* remove import of requests from memset.py in favour of internal Ansible modules.
* import necessary Ansible modules for request and response handling.
* create a response object in order to retain a stable interface to memset_api_call from existing modules.
* rework memset_api_call to remove requests.
* memset_zone.py:
* improve short description to be more verbose.
* ensure all imports directly follow documentation.
* remove any reference to requests.
* correct keyerror carried over from elsewhere.
* remove dependency on requests from documentation string
* disable integration tests until we have a cleanup method available
* HTTPAPI connection
* Punt run_commands to cliconf or httpapi
* Fake enable_mode on eapi
* Pull changes to nxos
* Move load_config to edit_config for future-preparedness
* Don't fail on lldp disabled
* Re-enable check_rc on nxos' run_commands
* Reorganize nxos httpapi plugin for compatibility
* draft docs for connection: httpapi
* restores docs for connection:local for eapi
* Add _remote_is_local to httpapi
handle incorrect data type in list lookup plugin
Fixes#35481
test to ensure that loops properly handle incorrect datatypes
Signed-off-by: Adam Miller <admiller@redhat.com>
* - add tests for s3_lifecycle
- fix a bug comparing transitions with different storage_types
* make s3_lifecycle work with boto3
* add noncurrent version lifecycle rules
* Change behavior to behaviour
- use existing fact to get hash setting rather than shell task
- fix code highlighting syntax in playbooks_variables.rst
* Re-wrote intro section; this entire topic needs a clean-up/rewrite.
* Fix failing aws_ses_identity integration tests
Reduce boilerplate with yaml anchor
* remove unstable test alias
* Update feedback forwarding check to use desired state rather than
repeated API calls.
* uri: Add form-urlencoded support to body_format
This PR adds form-urlencoded support so the user does not need to take
care of correctly encode input and have the same convenience as using
JSON.
This fixes#37182
* Various fixes
* Undo documentation improvements
No longer my problem
* Fix the remaining review comments
* Allow negative values to expires to unexpire a user
Fixes#20096
(cherry picked from commit 34f8080a19)
(cherry picked from commit 54619f70f4)
(cherry picked from commit 8c2fae27d6)
(cherry picked from commit db1a32f8ca)
* tweaked and normalized
- also added tests, made checking resilient
Using Ubuntu 14.04, test fails because 'blkid' < 2.21 doesn't recognize
'ocfs2' filesystem smaller than 108Mo:
6baa150398
filesystem: fix MKFS_FORCE_FLAGS for ocfs2
mkfs.ocfs2 -F won't work because mkfs.ocfs2 asks for a confirmation:
$ mkfs.ocfs2 -F img
mkfs.ocfs2 1.6.4
Cluster stack: classic o2cb
Overwriting existing ocfs2 partition.
WARNING: Cluster check disabled.
Proceed (y/N):
The undocumented 'x' switch must be used too.
add new line and update choice documentation
adding description for ocfs2 support
use correct variable ansible_distribution to test ocfs2 with Debian
distribution
use ansible_os_family for Debian
increase ocfs2 fs size to 20M (minimal size 11 instead of 10M)
add ocfs2 support for module filesystem
Update setup.yml
delete trailing spaces
add ocsfs2 defaut var
Install ocfs2-tools for all linux
Testing ocfs2 on for Ubuntu - restrict blkid to be be done
* Add setup ignore_errors for nxos_config test
* Fix parse_fan_info for n3k
* Skip bidir tests for N3k
* Omit vni config for n3k
* Skip unsupported nxos_vrf_af test on N3K
* Add legacy N3K platform tag
* improved scaleset facts
* scaleset facts fix some errors
* adding version_added for format param
* trying to break lines
* fixed syntax
* small code restructuring
* fix syntax
* fixed now
* add new test to scaleset / scaleset facts
* make scaleset test more clear
* temporarily comment out...
* try to retrieve scaleset facts
* try to add postfix
* fixed mistake
* fixed problem when no loadbalancer attached
* fixed another bug
* fixed sanity and a few other
* fixed pep8
* another try
* changed ansible to curated
* updated tests
* updated example and a few other mods
* small fixes
* removed unnecessary pass
* removed some items from ignore.txt
* remove file added by mistake
* add aks module and integration tests
* linting
* update tests
* sanity check
* make some changes to AKS module
* make integration test work
* add fact
* add resource_group name
* add fact test
* fix test
* fix test
* linting
* changed line endings for facts
* output kubeconfig
* Update azure_rm_aks.py
* update integration test aliases
* update aliases
* add cloud_environment and auth_source to args
* Fix comments from Jborean93 (#3)
* update
* fix
* fix
* fix
* fix
* update doc
* fix
* Set src in the state functions rather than the toplevel
A good API should only require passing one version of a piece of data
around so do that for src
* Move the rewriting of path into additional_parameter_handling
When the path is a directory we can rewrite the path to be a file inside
of the directory
* Emit a warning when src is used with a state where it should be ignored
Fixes several bugs exposed in #34893
* Fixes relative path handling in copy so that it splits directories and
reconstructs the correct file path
* Return failed in the proper circumstances
* Initial commit
* Socket Timeout and dest file handler
* sftp handling
* module name change as per review
* multiple thread tmp file overwite problem
* Integration test suite for network_put
* add additional testcase for dest argument
* fix pylint/pep8/modules warnings
* add socket timeout for get_file
* network_get module
* pep8 issue on network_get
* Review comments
* New module for CRUD functionality of networks in a Meraki environment
- Relatively full integration test suite
- More functions to come
* Fix indent for PEP8.
- Look into why this didn't show on a local PEP8 test
* Dag requested changes.
- Removed a section in get_net as its backend isn't implemented
- Documentation modifications
* Improved integration testing and results
- Added get_org() function to return data for single org
- Added a lot of new integration tests
- Changed result now shows, still probably could be better
* Fix formatting errors for PEP8
* New module: ec2_vpc_vpn_facts
* Add integration tests for ec2_vpc_vpn_facts and the IAM permissions
* Add retry to VPC removal
* Use unique name for VGW
* Always clean up after tests and add retries
pip 10 gives exit code 1 for empty argument lists (pip < 10 gave exit 0)
see also https://github.com/pypa/pip/pull/4210
To still allow playbooks to pass when giving empty lists, don't call
pip in that case, but show a warning.
Check datatype of device instead of comparing them directly in
vmware_guest. Also, added testcases to check this behavior.
DPVG is not supported in current version vcsim
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* configurable list of facts modules
- allow for args dict for specific modules
- add way to pass parameters
- avoid facts poluting test
- move to 'facts gathered' flag
- add 'gathering' setting tests
- Works with the --remote option.
- Can be disabled with the --disable-httptester option.
- Change image with the --httptester option.
- Only load and run httptester for targets that require it.
* handle end-policy issue
* revert changes in iosxr cliconf
* fix trailing parents not included in difference
* Moving fix to platform specific fix
* pep 8 issues
* base64 filter: Added ability to specify encoding
* Added unicode chars for further testing
* Removed errors to keep previous behaviour in place
* Removed surrogate pairs due to issues loading YAML in CI
* Prevent using action/local_action on includes and imports. Fixes#28822
* Use ModuleArgsParser to determine action instead of disallowing action/local_action with import/include
* Add to_native
* switch back to block in task_ds, use ModuleArgsParse otherwise
* var should be task_ds
* Add test validating action+include_tasks
Fix ios integration test failures in CI. Since the packet transfer and receive rate
on the interface is not determined to remove the tx_rate and rx_rate test conditions
to prevent intermittent failure.
* create internal loadbalancer
* fix test
* remove duplicate test
* clean up
* fix doc
* lint
* add sku support
* update version
* change to the version the same as CLI
* add pip support sku
* fix lint
* fix test
* Update main.yml
* add changelog entry
* Pull the tests for state=link into their own file
* Pull tests for what happens when dest is a directory out
* Expand both of the above sets of tests
There was a traceback when setting permissions on a directory tree when
there were broken symlinks inside of the tree and follow=true. chmod -R
ignores broken symlinks inside of the tree so we've fixed the file
module to do the same.
Fixes#39456
* Fix for file module with symlinks to nonexistent target
When creating a symlink to a nonexistent target, creating the symlink
would work but subsequent runs of the task would fail because it was
trying to operate on the target instead of the symlink.
Fixes#39558
* Initial commit
Query an organization within Meraki. No support is in place for managing
or creating yet
* Change output_level method and make the state parameter required.
* Implemented listing all organizations
- Updated documentation
- Parse results and return all organizations
- Parse results and return specified organization
* Framework for creating an organization
- Documentation example for organization creation
- Framework exists for creating organizations, pending PR 36809
- Created functions for HTTP calls
- Renamed from dashboard.meraki.com to api.meraki.com
- Added required_if for state
* Remove absent state
- Meraki API does not support deleting an organization so absent is removed
- Updated documentation to call it state instead of status
* Small change to documentation
* Support all parameters associated to organization
- Added all parameters needed for all organization actions.
- None of the added ones work at this time.
- Added documentation for clone.
* Integration test for meraki_organization module
* Rename module to meraki for porting to module utility
* Meraki documentation fragment
- Created initial documentation fragment for Meraki modules
* Add meraki module utility to branch. Formerly was on a separate branch.
* CRU support for Meraki organization module
* CRU is supported for Meraki organizations
* There is no DELETE function for organizations in the API
* This code is very messy and needs cleanup
* Create and Update actions don't show status as updated, must fix
* Added Meraki module utility to module utility documentation list
* Added support for organization cloning
* Renamed use_ssl to use_https
* Removed define_method()
* Removed is_org()
* Added is_org_valid() which does all org sanity checks
* Fixes for ansibot
- Changed default of use_proxy from true to false
- Removed some commented out code
- Updated documentation
* Changes for ansibot
- Removed requirement for state parameter. I may readd this.
- Updated formatting
diff --git a/lib/ansible/module_utils/network/meraki/meraki.py b/lib/ansible/module_utils/network/meraki/meraki.py
index 3acd3d1038..395ac7c4b4 100644
--- a/lib/ansible/module_utils/network/meraki/meraki.py
+++ b/lib/ansible/module_utils/network/meraki/meraki.py
@@ -42,7 +42,7 @@ def meraki_argument_spec():
return dict(auth_key=dict(type='str', no_log=True, fallback=(env_fallback, ['MERAKI_KEY'])),
host=dict(type='str', default='api.meraki.com'),
name=dict(type='str'),
- state=dict(type='str', choices=['present', 'absent', 'query'], required=True),
+ state=dict(type='str', choices=['present', 'absent', 'query']),
use_proxy=dict(type='bool', default=False),
use_https=dict(type='bool', default=True),
validate_certs=dict(type='bool', default=True),
diff --git a/lib/ansible/modules/network/meraki/meraki_organization.py b/lib/ansible/modules/network/meraki/meraki_organization.py
index 923d969366..3789be91d6 100644
--- a/lib/ansible/modules/network/meraki/meraki_organization.py
+++ b/lib/ansible/modules/network/meraki/meraki_organization.py
@@ -20,11 +20,9 @@ short_description: Manage organizations in the Meraki cloud
version_added: "2.6"
description:
- Allows for creation, management, and visibility into organizations within Meraki
-
notes:
- More information about the Meraki API can be found at U(https://dashboard.meraki.com/api_docs).
- Some of the options are likely only used for developers within Meraki
-
options:
name:
description:
@@ -32,21 +30,18 @@ options:
- If C(clone) is specified, C(name) is the name of the new organization.
state:
description:
- - Create or query organizations
- choices: ['query', 'present']
+ - Create or modify an organization
+ choices: ['present', 'query']
clone:
description:
- Organization to clone to a new organization.
- type: string
org_name:
description:
- Name of organization.
- Used when C(name) should refer to another object.
- type: string
org_id:
description:
- ID of organization
-
author:
- Kevin Breit (@kbreit)
extends_documentation_fragment: meraki
@@ -86,7 +81,6 @@ RETURN = '''
response:
description: Data returned from Meraki dashboard.
type: dict
- state: query
returned: info
'''
@@ -103,6 +97,7 @@ def main():
argument_spec = meraki_argument_spec()
argument_spec.update(clone=dict(type='str'),
+ state=dict(type='str', choices=['present', 'query']),
)
@@ -125,11 +120,9 @@ def main():
meraki.function = 'organizations'
meraki.params['follow_redirects'] = 'all'
- meraki.required_if=[
- ['state', 'present', ['name']],
- ['clone', ['name']],
- # ['vpn_PublicIP', ['name']],
- ]
+ meraki.required_if = [['state', 'present', ['name']],
+ ['clone', ['name']],
+ ]
create_urls = {'organizations': '/organizations',
}
@@ -162,23 +155,16 @@ def main():
-
- # method = None
- # org_id = None
-
-
- # meraki.fail_json(msg=meraki.is_org_valid(meraki.get_orgs(), org_name='AnsibleTestOrg'))
-
if meraki.params['state'] == 'query':
- if meraki.params['name'] is None: # Query all organizations, no matter what
- orgs = meraki.get_orgs()
- meraki.result['organization'] = orgs
- elif meraki.params['name'] is not None: # Query by organization name
- module.warn('All matching organizations will be returned, even if there are duplicate named organizations')
- orgs = meraki.get_orgs()
- for o in orgs:
- if o['name'] == meraki.params['name']:
- meraki.result['organization'] = o
+ if meraki.params['name'] is None: # Query all organizations, no matter what
+ orgs = meraki.get_orgs()
+ meraki.result['organization'] = orgs
+ elif meraki.params['name'] is not None: # Query by organization name
+ module.warn('All matching organizations will be returned, even if there are duplicate named organizations')
+ orgs = meraki.get_orgs()
+ for o in orgs:
+ if o['name'] == meraki.params['name']:
+ meraki.result['organization'] = o
elif meraki.params['state'] == 'present':
if meraki.params['clone'] is not None: # Cloning
payload = {'name': meraki.params['name']}
@@ -193,7 +179,10 @@ def main():
payload = {'name': meraki.params['name'],
'id': meraki.params['org_id'],
}
- meraki.result['response'] = json.loads(meraki.request(meraki.construct_path('update', org_id=meraki.params['org_id']), payload=json.dumps(payload), method='PUT'))
+ meraki.result['response'] = json.loads(meraki.request(meraki.construct_path('update',
+ org_id=meraki.params['org_id']),
+ payload=json.dumps(payload),
+ method='PUT'))
diff --git a/lib/ansible/utils/module_docs_fragments/meraki.py b/lib/ansible/utils/module_docs_fragments/meraki.py
index e268d02e68..3569d83b99 100644
--- a/lib/ansible/utils/module_docs_fragments/meraki.py
+++ b/lib/ansible/utils/module_docs_fragments/meraki.py
@@ -35,6 +35,7 @@ options:
description:
- Set amount of debug output during module execution
choices: ['normal', 'debug']
+ default: 'normal'
timeout:
description:
- Time to timeout for HTTP requests.
diff --git a/test/integration/targets/meraki_organization/aliases b/test/integration/targets/meraki_organization/aliases
new file mode 100644
index 0000000000..ad7ccf7ada
--- /dev/null
+++ b/test/integration/targets/meraki_organization/aliases
@@ -0,0 +1 @@
+unsupported
* Formatting fix
* Minor updates due to testing
- Made state required again
- Improved formatting for happier PEP8
- request() now sets instance method
* Fix reporting of the result
* Enhance idempotency checks
- Remove merging functionality as the proposed should be used
- Do check and reverse check to look for differences
* Rewrote and added additional integration tests. This isn't done.
* Updated is_update_required method:
- Original and proposed data is passed to method
- Added ignored_keys list so it can be skipped if needed
* Changes per comments from dag
- Optionally assign function on class instantiation
- URLs now have {} for substitution method
- Move auth_key check to module utility
- Remove is_new and get_existing
- Minor changes to documentation
* Enhancements for future modules and organization
- Rewrote construct_path method for simplicity
- Increased support for network functionality to be committed
* Changes based on Dag feedback and to debug problems
* Minor fixes for validitation testing
* Small changes for dag and Ansibot
- Changed how auth_key is processed
- Removed some commented lines
- Updated documentation fragment, but that may get reverted
* Remove blank line and comment
* Improvements for testing and code simplification
- Added network integration tests
- Modified error handling in request()
- More testing to come on this
- Rewrote construct_path again. Very simple now.
* Remove trailing whitespace
* Small changes based on dag's response
* Removed certain sections from exit_json and fail_json as they're old
* ec2_vpc_route_table: Update matching_count parsing on find_subnets function and tests
* ec2_vpc_route_table: Update matching_count parsing on find_subnets function
* Stabilize ec2_vpc_vgw and ec2_vpc_vpn so tests for ec2_vpc_vpn_facts in PR 35983 can be run in CI
* Add updated placebo recordings
* ensure find_vgw uses the virtual gateway id if available
Add AWSRetry.jittered_backoff to attach_vpn_gateway to deal with errors when attaching a new VPC directly after detaching
Add integrations tests for ec2_vpc_vgw
* Sort VPN Gateways by ID
* vyos_interface require multiple network nodes to run
We don't have the ability to run these currently, so disable them.
The original logic was also incorrect, the tests don't pass on lab, DCI
nor single instance nodepool, so disable
https://github.com/ansible/ansible/issues/39667 tracks getting these
enabled again
* eth0 -> Gi0/0
* Correctly detect if we should run lldp
* Correctly detect if we should run lldp
* Add helpful failure message if target_type=ip is not supported
Create test case for target_type=ip not supported
* Update elb_target_group module to latest standards
Use AnsibleAWSModule
Improve exception handling
Improve connection handling
Improve naming of one of the cloudfront tasks
Change test_identifier back to resource_prefix now it's always
lower case.
More tests around using distribution_id and default_root_object
* Fix eos_vlan associated interface check
Fix eos_vlan associated interface check by comparing
the interface in want and have without converting the
interface name to lower
* Update eos_vlan docs
* Only change expiration date if it is different
Modify user_info() method to also return the password expiration.
Compare current and desired expiration times and only change if they are different.
* Improve formatting on user tests
* Add integration test for expiration
* Add changelog fragment
* Improve integration test
Skip macOS and use getent module for validating expiration date.
* Fix expiration change for FreeBSD
* Don't use datetime since the total_seconds method isn't available on CentOS 6
* Use better name for expiration index field
Use separate tasks for verifying expiration date on BSD
* Use calendar.timegm() rather than time.mktime()
calendar.timegm() is the inverse of time.gmtime() and returns a timestamp in UTC not localtime
Add tests that change the system timezone away from UTC
* Mark tests as destructive and use test for change status
* Fix account expiration for FreeBSD
Use DATE_FORMAT when setting expiration date on FreeBSD. Previously the argument passed to -e was an integer of days since epoch when the account will expire which was inserted directly into master.passwd. This value is interpreted as seconds since epoch by the system, meaning the account expiration was actually set to a few hours past epoch.
Greatly simply comparing desired and current expiration time by using the first three values of the struct_time tuple rather than doing a whole bunch of manipulations of the seconds since epoch.
This is a test in response to #27262 but I could not provoke the error
so it only shows that the current code is working with non-ascii
filenames in this case. It doesn't show whether there's some other bug
somewhere.
* task_executor.py: Raise 'conditional exception' in case of 'include_*'
Fixes#33632
Signed-off-by: Patrick Ringl <patrick_@freenet.de>
* Re-organize tests, add static include test with undefined var
* Remove unnecessary conditional
* Fixes for mode=preserve
* Document mode=preserve for template and copy
* Make mode=preserve work with remote_src for copy
* Make mode=preserve work for template
* Integration tests for copy & template mode=preserve
Fixes#39279
* Changed mode option in win_copy to hidden option as it doesn't reflect copy mode
* Fix#26755 by ensuring that the first nic in the nic list has primary set to True, and all other nics have primary set to False.
* Fix sanity issues and add test for two nics
* Fix typo in test
* fix nic list
* Ensure the niclist variable is used rather than a niclist string
* Add tests just for dual nic, reverting changes to single nic VM creation tests
* Correct idempotency test
Enable awsvpc network mode for ECS services and tasks and
their underlying task definitions
Improve test suite to thoroughly test the changes
Use runme.sh technique to run old and new versions of botocore to
ensure that the modules work with older botocore and older network modes
and fail gracefully if awsvpc network mode is used with older botocore
* add loadbalancer
* dict check nullable
* add default vallue when get list
* create backend addr pool
* fix the set
* fix to dict
* fix ideponement
* use param security group name when create
* nic can has no nsg
* add test
* fix
* fix
* fix
* fix idemponet
* add document
* fix test
* add configuration
* fix
* fix
* remove all resources
* fix
* fix test
* add version added
* fix lint
* fix lint
* fix lint
* remove new feature and only submit bugfix
* remove useless test
* fix
* psexec: new module to run commands on a remote Windows host without WinRM
* fix up sanity issue, create test firewall rule for SMB traffic
* Fixed up yaml linting issues, trying to fix on the fly firewall rule
* Added SMB exception to catch when cleaning up PAExec exe
* Don't load profile for Azure hosts when becoming another user
* Fixed up example to use correct option
* Reworded notes section of module docs
* Simplified module options around process integrity levels and the system account
* Improve ec2_ami tests
Ensure that ec2_ami_image_id fact gets set immediately after AMI
creation so that they get torn down even if tests fail
Use YAML anchor to simplify AWS credential passing
Use aws_connection_info to reduce AWS credential boilerplate
Improve exception handling when updating image attributes
Error messages weren't correctly formatted to show image ids.
* VMware: apply correct value for datacenter in TC
Signed-off-by: Tim Steinbach <tim@nequissimus.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add yarn module based off of NPM module, adjust syntax for install cmd
* Update author list
* Add Return docbloc
* Remove extra var assignment
* Always return output without emojis, small changes for yarn 0.16.1
* Move import line, add ANSIBLE_METADATA, bump version_added
* Updating module format to meet newest lint requirements. Update options and example docs.
* Bring back RETURN block and main() execution.
* All trailing whitespace removed.
* Remove json try/except.
* Add initial pass at setting up Yarn integration tests.
* Add better handling for latest and removal states. Add tests for upgrading a single package.
* Fix issue where state=latest for installing all packages caused failure.
* Set yarn bin to latest version for tests. Fix sanity tests.
* Switch template task to copy task in yarn integration tests.
* Fix the function_name handling logic for lambda_policy
Switch the logic handling function_names that are ARNs
so that ARNs are correctly handled and detected
* Add tests for lambda_policy function_arn
Ensure that function_arn works.
Needs a reasonable ansible_lambda_role.
* Skip self._parent on dynamic, defer to grandparent for attr lookup
* Revert _inheritable
* Add tests for include inheritance from static blocks
Fixes#38037#36194
If user does not specify any network type then set network type
to dhcp. There are additional checks around 'ip', 'netmask' and
'type' in network spec.
Fixes: #38466
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Include change classification data in metadata.
* Add support for disabled tests.
* Add support for unstable tests.
* Add support for unsupported tests.
* Overhaul integration aliases sanity test.
* Update Shippable scripts to handle unstable tests.
* Mark unstable Azure tests.
* Mark unstable Windows tests.
* Mark disabled tests.
* Add include_import tests for many top level include_tasks
Rename a few test playbooks to make more sense
* Use fewer include_tasks due to memory limits in CI
* get_url should accept headers as a dict, instead of only a complicated string
* update headers description text
* Add headers string and dict tests for get_url
* Add intg test for string header format parsing error
* Adjust deprecation version ahead 1 release, add the version dict format was added in to description
* Handle duplicate headers, and make it easier for users to use cookies, by providing a pre-built string
* Ensure proper cookie ordering, make key plural
* Add note about cookie sort order
* Add tests for duplicate headers and cookies_string
* Extend tests, normalize headers between py2 and py3
* Add some notes in test code
* Don't use AttributeError, use six.PY3. Use better names.
* Error if a module is found to shadow a reserved keyword
* Add test for shadowed module
* Bring in functools.wraps for the decorator
* Drop the decorator, make _find_plugin the real function, find_plugin now holds the shadow logic
* Swap order of functions for bottom to top execution order
* Only error for modules
* Add test for loading a lookup plugin that shadows a keyword
Currently, when ones run the module in check_mode it tries to retrieve
values from the actual certificate generated in the generate() function.
Since in check_mode we call dump() without calling generate(), self.cert
is None, leading to self.cert.get_notBefore(), self.cert.get_notAfter()
and self.cert.get_serial_number() raising an error.
> NoneType' object has no attribute 'get_notBefore'
The solution is to have two way to handle dump() method, whether its run
in check_mode=True or check_mode=False leading to different way the
information is retrieved.
* Required changes to support redirects on HTTP 307/308
This ensures HTTP 307 and 308 will redirect the request to the new
location without modification.
* Fix the unused newheaders reference
* Be more compliant
* Add integration tests for follow_redirects=all
* Improve other tests for new behaviour
* Make follow_redirects values more strict
* added eos_smoke tests
* removed left over file
* added note to uncomment broken eapi test when #36919 is fixed
* uncommented fixed test, added unbecome test
* skip become tests when connection=local
* Added module win_pester and relatives integration tests
* Corrected issues as stated by ansible-test
* Added defaults variable in integration tests
* Added task to install Pester if needed in the integration test
* Corrected error in win_psmodule task
* Added Pester installation with Chocolatey when Powershell version < 5
* Get facts...
* Disabled invoke-pester output
* Added pester_result type
* Added jhawkesworth changes proposal
* Corrected documentation linting
* Corrected linting
* Added dagwieers recommendations
* Added dagwieers recommendations
* Corrected linting errors and task error in integration test
* Corrected error in integration test
* Added dagwieers recommendations
* Corrected requirements in the DOCUMENTATION block
* tolerate windows line endings when loading windows module utils. Helpful for old custom windows modules.
* add test modules to demonstrate win line ending module load behaviour.
* attempt to fix sanity check failures
* pep8 fix
* explict skip of test modules from shebang check (core modules must still have expected unix style line endings)
* switch to rstrip() following core team meeting feedback
Kevin Breit