You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
watchtower/docs/lifecycle-hooks.md

68 lines
3.0 KiB
Markdown

## Executing commands before and after updating
!!! note
These are shell commands executed with `sh`, and therefore require the container to provide the `sh`
executable.
It is possible to execute _pre/post\-check_ and _pre/post\-update_ commands
**inside** every container updated by watchtower.
- The _pre-check_ command is executed for each container prior to every update cycle.
- The _pre-update_ command is executed before stopping the container when an update is about to start.
- The _post-update_ command is executed after restarting the updated container
- The _post-check_ command is executed for each container post every update cycle.
This feature is disabled by default. To enable it, you need to set the option
`--enable-lifecycle-hooks` on the command line, or set the environment variable
`WATCHTOWER_LIFECYCLE_HOOKS` to `true`.
### Specifying update commands
The commands are specified using docker container labels, the following are currently available:
| Type | Docker Container Label |
| ----------- | ------------------------------------------------------ |
| Pre Check | `com.centurylinklabs.watchtower.lifecycle.pre-check` |
| Pre Update | `com.centurylinklabs.watchtower.lifecycle.pre-update` |
| Post Update | `com.centurylinklabs.watchtower.lifecycle.post-update` |
| Post Check | `com.centurylinklabs.watchtower.lifecycle.post-check` |
These labels can be declared as instructions in a Dockerfile (with some example .sh files) or be specified as part of
the `docker run` command line:
=== "Dockerfile"
```docker
LABEL com.centurylinklabs.watchtower.lifecycle.pre-check="/sync.sh"
LABEL com.centurylinklabs.watchtower.lifecycle.pre-update="/dump-data.sh"
LABEL com.centurylinklabs.watchtower.lifecycle.post-update="/restore-data.sh"
LABEL com.centurylinklabs.watchtower.lifecycle.post-check="/send-heartbeat.sh"
```
=== "docker run"
```bash
docker run -d \
--label=com.centurylinklabs.watchtower.lifecycle.pre-check="/sync.sh" \
--label=com.centurylinklabs.watchtower.lifecycle.pre-update="/dump-data.sh" \
--label=com.centurylinklabs.watchtower.lifecycle.post-update="/restore-data.sh" \
someimage --label=com.centurylinklabs.watchtower.lifecycle.post-check="/send-heartbeat.sh" \
```
### Timeouts
The timeout for all lifecycle commands is 60 seconds. After that, a timeout will
occur, forcing Watchtower to continue the update loop.
#### Pre-update timeouts
For the `pre-update` lifecycle command, it is possible to override this timeout to
allow the script to finish before forcefully killing it. This is done by adding the
label `com.centurylinklabs.watchtower.lifecycle.pre-update-timeout` followed by
the timeout expressed in minutes.
If the label value is explicitly set to `0`, the timeout will be disabled.
### Execution failure
The failure of a command to execute, identified by an exit code different than
0, will not prevent watchtower from updating the container. Only an error
log statement containing the exit code will be reported.