tailscale

Commit Graph

Author	SHA1	Message	Date
Maisem Ali	be027a9899	control/controlclient: improve handling of concurrent lite map requests This reverts commit `6eca47b16c` and fixes forward. Previously the first ever streaming MapRequest that a client sent would also set ReadOnly to true as it didn't have any endpoints and expected/relied on the map poll to restart as soon as it got endpoints. However with `48f6c1eba4`, we would no longer restart MapRequests as frequently as we used to, so control would only ever get the first streaming MapRequest which had ReadOnly=true. Control would treat this as an uninteresting request and would not send it any further netmaps, while the client would happily stay in the map poll forever while litemap updates happened in parallel. This makes it so that we never set `ReadOnly=true` when we are doing a streaming MapRequest. This is no longer necessary either as most endpoint discovery happens over disco anyway. Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Tom DNetto	6eca47b16c	Revert "control/controlclient: improve handling of concurrent lite map requests" This reverts commit `48f6c1eba4`. It unfortunately breaks mapresponse wakeups. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Andrew Dunham	48f6c1eba4	control/controlclient: improve handling of concurrent lite map requests Prior to this change, if we were in the middle of a lite map update we'd tear down the entire map session and restart it. With this change, we'll cancel an in-flight lite map request up to 10 times and restart before we tear down the streaming map request. We tear down everything after 10 retries to ensure that a steady stream of calls to sendNewMapRequest doesn't fail to make progress by repeatedly canceling and restarting. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Co-authored-by: Maisem Ali <maisem@tailscale.com> Change-Id: I9392bf8cf674e7a58ccd1e476039300a359ef3b1	2 years ago
Mihai Parparita	6ac6ddbb47	sockstats: switch label to enum Makes it cheaper/simpler to persist values, and encourages reuse of labels as opposed to generating an arbitrary number. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	9cb332f0e2	sockstats: instrument networking code paths Uses the hooks added by tailscale/go#45 to instrument the reads and writes on the major code paths that do network I/O in the client. The convention is to use "<package>.<type>:<label>" as the annotation for the responsible code path. Enabled on iOS, macOS and Android only, since mobile platforms are the ones we're most interested in, and we are less sensitive to any throughput degradation due to the per-I/O callback overhead (macOS is also enabled for ease of testing during development). For now just exposed as counters on a /v0/sockstats PeerAPI endpoint. We also keep track of the current interface so that we can break out the stats by interface. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Maisem Ali	f00a49667d	control/controlclient: make Status.Persist a PersistView Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	4d330bac14	ipn/ipnlocal: add support for multiple user profiles Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	910db02652	client/tailscale, tsnet, ipn/ipnlocal: prove nodekey ownership over noise Fixes #5972 Change-Id: Ic33a93d3613ac5dbf172d6a8a459ca06a7f9e547 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	d98305c537	cmd,ipn/ipnlocal,tailcfg: implement TKA disablement * Plumb disablement values through some of the internals of TKA enablement. * Transmit the node's TKA hash at the end of sync so the control plane understands each node's head. * Implement /machine/tka/disable RPC to actuate disablement on the control plane. There is a partner PR for the control server I'll send shortly. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Emmanuel T Odeke	680f8d9793	all: fix more resource leaks found by staticmajor Updates #5706 Signed-off-by: Emmanuel T Odeke <emmanuel@orijtech.com>	2 years ago
Brad Fitzpatrick	fb4e23506f	control/controlclient: stop restarting map polls on health change At some point we started restarting map polls on health change, but we don't remember why. Maybe it was a desperate workaround for something. I'm not sure it ever worked. Rather than have a haunted graveyard, remove it. In its place, though, and somewhat as a safety backup, send those updates over the HTTP/2 noise channel if we have one open. Then if there was a reason that a map poll restart would help we could do it server-side. But mostly we can gather error stats and show machine-level health info for debugging. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	ef0d740270	control/controlclient: remove Client.SetStatusFunc It can't change at runtime. Make it an option. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a1e429f7c3	control/controlclient, types/netmap: remove unused LocalPort field Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	526b0b6890	control/controlclient: start simplifying netmap fetch APIs Step 1 of many, cleaning up the direct/auto client & restarting map requests that leads to all the unnecessary map requests. Updates tailscale/corp#5761 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Jordan Whited	43f9c25fd2	cmd/tailscale: surface authentication errors in status.Health (#4748 ) Fixes #3713 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Maisem Ali	c60cbca371	control/controlclient: store netinfo and hostinfo separately Currently, when SetNetInfo is called it sets the value on hostinfo.NetInfo. However, when SetHostInfo is called it overwrites the hostinfo field which may mean it also clears out the NetInfo it had just received. This commit stores NetInfo separately and combines it into Hostinfo as needed so that control is always notified of the latest values. Also, remove unused copies of Hostinfo from ipn.Status and controlclient.Auto. Updates #tailscale/corp#4824 (maybe fixes) Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	efc48b0578	ssh/tailssh, ipnlocal, controlclient: fetch next SSHAction from network Updates #3802 Change-Id: I08e98805ab86d6bbabb6c365ed4526f54742fd8e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Nick O'Neill	1625e87526	control/controlclient, localapi: shorten expiry time via localapi (#4112 ) Signed-off-by: Nick O'Neill <nick@tailscale.com>	3 years ago
Maisem Ali	ba2c0c3145	control/controlclient: call direct.Close after map requests are complete This was causing a flake in another repo. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	91a8cdc84b	control/controlclient: make Auto.Shutdown call Direct.Close Updates #3488 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	86a902b201	all: adjust some log verbosity Updates #1548 Change-Id: Ia55f1b5dc7dfea09a08c90324226fb92cd10fa00 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	d9c21936c3	control/controlclient: stop logging about goal.url invariant This isn't the ideal solution, but it's good enough for now. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Anderson	4d38194c21	control/controlclient: stop using wgkey. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	0c546a28ba	types/persist: use new node key type. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Maisem Ali	81cabf48ec	control/controlclient,tailcfg: propagate registration errors to the frontend Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	e29cec759a	ipn/{ipnlocal,localapi}, control/controlclient: add SetDNS localapi Updates #1235 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Avery Pennarun	8a7d35594d	ipnlocal: don't assume NeedsLogin immediately after StartLogout(). Previously, there was no server round trip required to log out, so when you asked ipnlocal to Logout(), it could clear the netmap immediately and switch to NeedsLogin state. In v1.8, we added a true Logout operation. ipn.Logout() would trigger an async cc.StartLogout() and also immediately switch to NeedsLogin. Unfortunately, some frontends would see NeedsLogin and immediately trigger a new StartInteractiveLogin() operation, before the controlclient auth state machine actually acted on the Logout command, thus accidentally invalidating the entire logout operation, retaining the netmap, and violating the user's expectations. Instead, add a new LogoutFinished signal from controlclient (paralleling LoginFinished) and, upon starting a logout, don't update the ipn state machine until it's received. Updates: #1918 (BUG-2) Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	0181a4d0ac	ipnlocal: don't pause the controlclient until we get at least one netmap. Without this, macOS would fail to display its menu state correctly if you started it while !WantRunning. It relies on the netmap in order to show the logged-in username. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	b4d04a065f	controlclient: extract a Client interface and rename Client->Auto. This will let us create a mock or fake Client implementation for use with ipn.Backend. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Avery Pennarun	cc3119e27e	controlclient: extract State and Status stuff into its own file. No changes other than moving stuff around. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Brad Fitzpatrick	09891b9868	ipn/ipnlocal: on fresh lazy-connecting install, start in state NeedsLogin Fixes #1759 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	34d2f5a3d9	tailcfg: add Endpoint, EndpointType, MapRequest.EndpointType Track endpoints internally with a new tailcfg.Endpoint type that includes a typed netaddr.IPPort (instead of just a string) and includes a type for how that endpoint was discovered (STUN, local, etc). Use []tailcfg.Endpoint instead of []string internally. At the last second, send it to the control server as the existing []string for endpoints, but also include a new parallel MapRequest.EndpointType []tailcfg.EndpointType, so the control server can start filtering out less-important endpoint changes from new-enough clients. Notably, STUN-discovered endpoints can be filtered out from 1.6+ clients, as they can discover them amongst each other via CallMeMaybe disco exchanges started over DERP. And STUN endpoints change a lot, causing a lot of MapResposne updates. But portmapped endpoints are worth keeping for now, as they they work right away without requiring the firewall traversal extra RTT dance. End result will be less control->client bandwidth. (despite negligible increase in client->control bandwidth) Updates tailscale/corp#1543 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	3167e55ddf	ipn/{ipnlocal,localapi}, cmd/tailscale: add logout command Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ddaacf0a57	control/controlclient: document a few things Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	0a02aaf813	control, ipn, tailcfg: remove golang.org/x/oauth2 dep, add tailcfg.Oauth2Token golang.org/x/oauth2 pulls in App Engine and grpc module dependencies, screwing up builds that depend on this module. Some background on the problem: https://go.googlesource.com/proposal/+/master/design/36460-lazy-module-loading.md Fixes tailscale/corp#1471 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	cc508be603	control/controlclient: remove redundant Hostinfo log The direct client already logs it in JSON form. Then it's immediately logged again in an unformatted dump, so this removes that unformatted one. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	9eb65601ef	health, ipn/ipnlocal: track, log overall health Updates #1505 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ba8c6d0775	health, controlclient, ipn, magicsock: tell health package state of things Not yet checking anything. Just plumbing states into the health package. Updates #1505 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	fd8e070d01	health, control/controlclient, wgengine: report when router unhealthy Updates tailscale/corp#1338 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	1e7a35b225	types/netmap: split controlclient.NetworkMap off into its own leaf package Updates #1278 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ddfcc4326c	types/persist: split controlclient.Persist into a small leaf package This one alone doesn't modify the global dependency map much (depaware.txt if anything looks slightly worse), but it leave controlclient as only containing NetworkMap: bradfitz@tsdev:~/src/tailscale.com/ipn$ grep -F "controlclient." .go backend.go: NetMap controlclient.NetworkMap // new netmap received fake_test.go: b.notify(Notify{NetMap: &controlclient.NetworkMap{}}) fake_test.go: b.notify(Notify{NetMap: &controlclient.NetworkMap{}}) handle.go: netmapCache controlclient.NetworkMap handle.go:func (h Handle) NetMap() *controlclient.NetworkMap { Once that goes into a leaf package, then ipn doesn't depend on controlclient at all, and then the client gets smaller. Updates #1278	4 years ago
Brad Fitzpatrick	e8d4afedd1	control/controlclient: don't call lite endpoint update path when logged out This was the other half of the #1271 problem. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	2f04f49376	control/controlclient: use lite map request handler to avoid aborting streams Previously, any change to endpoints or hostinfo (or hostinfo's netinfo) would result in the long-running map request HTTP stream being torn down and restarted, losing all compression context along with it. This change makes us instead send a lite map request (OmitPeers: true, Stream: false) that doesn't subscribe to anything, and then the coordination server knows to not close other streams for that node when it recives a lite request. Fixes tailscale/corp#797 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	56a7652dc9	wgkey: new package This is a replacement for the key-related parts of the wireguard-go wgcfg package. This is almost a straight copy/paste from the wgcfg package. I have slightly changed some of the exported functions and types to avoid stutter, added and tweaked some comments, and removed some now-unused code. To avoid having wireguard-go depend on this new package, wgcfg will keep its key types. We translate into and out of those types at the last minute. These few remaining uses will be eliminated alongside the rest of the wgcfg package. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	053a1d1340	all: annotate log verbosity levels on most egregiously spammy log prints Fixes #924 Fixes #282 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c348fb554f	control/controlclient: clarify a comment	4 years ago
Brad Fitzpatrick	a0a8b9d76a	control/controlclient: don't spin when starting up when node key is expired Fixes #1018 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	82f2fdc194	control/controlclient: adjust some logging point names The previous code read too explicitly like log.Printf("I am here1"), log.Printf("I am here2"). It still is with this change, but prettier, and less subject to code rearranging order.	4 years ago

1 2

68 Commits (v1.38.1)