tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	cec779e771	util/slicesx: add FirstElementEqual and LastElementEqual And update a few callers as examples of motivation. (there are a couple others, but these are the ones where it's prettier) Updates #cleanup Change-Id: Ic8c5cb7af0a59c6e790a599136b591ebe16d38eb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Maisem Ali	4d6a8224d5	util/linuxfw: fall back to nftables when iptables not found When the desired netfilter mode was unset, we would always try to use the `iptables` binary. In such cases if iptables was not found, tailscaled would just crash as seen in #13440. To work around this, in those cases check if the `iptables` binary even exists and if it doesn't fall back to the nftables implementation. Verified that it works on stock Ubuntu 24.04. Updates #5621 Updates #8555 Updates #8762 Fixes #13440 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 months ago
Maisem Ali	a917718353	util/linuxfw: return nil interface not concrete type It was returning a nil `*iptablesRunner` instead of a nil `NetfilterRunner` interface which would then fail checks later. Fixes #13012 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 months ago
Brad Fitzpatrick	c6af5bbfe8	all: add test for package comments, fix, add comments as needed Updates #cleanup Change-Id: Ic4304e909d2131a95a38b26911f49e7b1729aaef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Tom Proctor	01a7726cf7	cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies (#12577 ) cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies Don't skip installing egress forwarding rules for IPv6 (as long as the host supports IPv6), and set headless services `ipFamilyPolicy` to `PreferDualStack` to optionally enable both IP families when possible. Note that even with `PreferDualStack` set, testing a dual-stack GKE cluster with the default DNS setup of kube-dns did not correctly set both A and AAAA records for the headless service, and instead only did so when switching the cluster DNS to Cloud DNS. For both IPv4 and IPv6 to work simultaneously in a dual-stack cluster, we require headless services to return both A and AAAA records. If the host doesn't support IPv6 but the FQDN specified only has IPv6 addresses available, containerboot will exit with error code 1 and an error message because there is no viable egress route. Fixes #12215 Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	4 months ago
Irbe Krumina	24a40f54d9	util/linuxfw: verify that IPv6 if available if (#12598 ) nftable runner for an IPv6 address gets requested. Updates tailscale/tailscale#12215 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	4 months ago
Brad Fitzpatrick	909a292a8d	util/linuxfw: don't try cleaning iptables on gokrazy It just generates log spam. Updates #12277 Change-Id: I5f65c0859e86de0a5349f9d26c9805e7c26b9371 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Irbe Krumina	7ef2f72135	util/linuxfw: fix IPv6 availability check for nftables (#12009 ) * util/linuxfw: fix IPv6 NAT availability check for nftables When running firewall in nftables mode, there is no need for a separate NAT availability check (unlike with iptables, there are no hosts that support nftables, but not IPv6 NAT - see tailscale/tailscale#11353). This change fixes a firewall NAT availability check that was using the no-longer set ipv6NATAvailable field by removing the field and using a method that, for nftables, just checks that IPv6 is available. Updates tailscale/tailscale#12008 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Andrew Dunham	25e32cc3ae	util/linuxfw: fix table name in DelStatefulRule Updates #12061 Follow-up to #12072 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I2ba8c4bff14d93816760ff5eaa1a16f17bad13c1	6 months ago
Anton Tolchanov	ac638f32c0	util/linuxfw: fix stateful packet filtering in nftables mode To match iptables: `b5dbf155b1/util/linuxfw/iptables_runner.go (L536)` Updates #12066 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	6 months ago
Andrew Lytvynov	c28f5767bf	various: implement stateful firewalling on Linux (#12025 ) Updates https://github.com/tailscale/corp/issues/19623 Change-Id: I7980e1fb736e234e66fa000d488066466c96ec85 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Co-authored-by: Andrew Dunham <andrew@du.nham.ca>	6 months ago
Irbe Krumina	add62af7c6	util/linuxfw,go.{mod,sum}: don't log errors when deleting non-existant chains and rules (#11852 ) This PR bumps iptables to a newer version that has a function to detect 'NotExists' errors and uses that function to determine whether errors received on iptables rule and chain clean up are because the rule/chain does not exist- if so don't log the error. Updates corp#19336 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	3af0f526b8	cmd{containerboot,k8s-operator},util/linuxfw: support ExternalName Services (#11802 ) * cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name Adds support for optionally configuring containerboot to proxy traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var to containerboot. Containerboot will periodically (every 10 minutes) attempt to resolve the DNS name and ensure that all traffic sent to the node's tailnet IP gets forwarded to the resolved backend IP addresses. Currently: - if the firewall mode is iptables, traffic will be load balanced accross the backend IP addresses using round robin. There are no health checks for whether the IPs are reachable. - if the firewall mode is nftables traffic will only be forwarded to the first IP address in the list. This is to be improved. * cmd/k8s-operator: support ExternalName Services Adds support for exposing endpoints, accessible from within a cluster to the tailnet via DNS names using ExternalName Services. This can be done by annotating the ExternalName Service with tailscale.com/expose: "true" annotation. The operator will deploy a proxy configured to route tailnet traffic to the backend IPs that service.spec.externalName resolves to. The backend IPs must be reachable from the operator's namespace. Updates tailscale/tailscale#10606 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
James Tucker	db760d0bac	cmd/tailscaled: move cleanup to an implicit action during startup This removes a potentially increased boot delay for certain boot topologies where they block on ExecStartPre that may have socket activation dependencies on other system services (such as systemd-resolved and NetworkManager). Also rename cleanup to clean up in affected/immediately nearby places per code review commentary. Fixes #11599 Signed-off-by: James Tucker <james@tailscale.com>	7 months ago
Irbe Krumina	1fbaf26106	util/linuxfw: fix chain comparison (#11639 ) Don't compare pointer fields by pointer value, but by the actual value Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	92ca770b8d	util/linuxfw: fix MSS clamping in nftables mode (#11588 ) MSS clamping for nftables was mostly not ran due to to an earlier rule in the FORWARD chain issuing accept verdict. This commit places the clamping rule into a chain of its own to ensure that it gets ran. Updates tailscale/tailscale#11002 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	5fb721d4ad	util/linuxfw,wgengine/router: skip IPv6 firewall configuration in partial iptables mode (#11546 ) We have hosts that support IPv6, but not IPv6 firewall configuration in iptables mode. We also have hosts that have some support for IPv6 firewall configuration in iptables mode, but do not have iptables filter table. We should: - configure ip rules for all hosts that support IPv6 - only configure firewall rules in iptables mode if the host has iptables filter table. Updates tailscale/tailscale#11540 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
James Tucker	3f7313dbdb	util/linuxfw,wgengine/router: enable IPv6 configuration when netfilter is disabled Updates #11434 Signed-off-by: James Tucker <james@tailscale.com>	7 months ago
James Tucker	055117ad45	util/linuxfw: fix support for containers without IPv6 iptables filters (#11381 ) There are container environments such as GitHub codespaces that have partial IPv6 support - routing support is enabled at the kernel level, but lacking IPv6 filter support in the iptables module. In the specific example of the codespaces environment, this also has pre-existing legacy iptables rules in the IPv4 tables, as such the nascent firewall mode detection will always pick iptables. We would previously fault trying to install rules to the filter table, this catches that condition earlier, and disables IPv6 support under these conditions. Updates #5621 Updates #11344 Updates #11354 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
James Tucker	43fba6e04d	util/linuxfw: correct logical error in NAT table check (#11380 ) Updates #11344 Updates #11354 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Irbe Krumina	90c4067010	util/linuxfw: add container-friendly IPv6 NAT check (#11353 ) Remove IPv6 NAT check when routing is being set up using nftables. This is unnecessary as support for nftables was added after support for IPv6. https://tldp.org/HOWTO/Linux+IPv6-HOWTO/ch18s04.html https://wiki.nftables.org/wiki-nftables/index.php/Building_and_installing_nftables_from_sources Additionally, run an extra check for IPv6 NAT support when the routing is set up with iptables. This is because the earlier checks rely on being able to use modprobe and on /proc/net/ip6_tables_names being populated on start - these conditions are usually not true in container environments. Updates tailscale/tailscale#11344 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	097c5ed927	util/linuxfw: insert rather than append nftables DNAT rule (#11303 ) Ensure that the latest DNATNonTailscaleTraffic rule gets inserted on top of any pre-existing rules. Updates tailscale/tailscale#11281 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Brad Fitzpatrick	2bd3c1474b	util/cmpx: delete now that we're using Go 1.22 Updates #11058 Change-Id: I09dea8e86f03ec148b715efca339eab8b1f0f644 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
James Tucker	0b16620b80	.github/workflows: add privileged tests workflow We had missed regressions from privileged tests not running, now they can run. Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Andrew Lytvynov	2716250ee8	all: cleanup unused code, part 2 (#10670 ) And enable U1000 check in staticcheck. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Irbe Krumina	0cdc8e20d6	util/linuxfw: return created chain (#10563 ) Ensure that if getOrCreateChain creates a new chain, it actually returns the created chain Updates tailscale/tailscale#10399 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Naman Sood	d46a4eced5	util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux (#10370 ) * util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux Updates #9084. Currently, we have to tell users to manually open UDP ports on Linux when certain firewalls (like ufw) are enabled. This change automates the process of adding and updating those firewall rules as magicsock changes what port it listens on. Signed-off-by: Naman Sood <mail@nsood.in>	11 months ago
Naman Sood	0a59754eda	linuxfw,wgengine/route,ipn: add c2n and nodeattrs to control linux netfilter Updates tailscale/corp#14029. Signed-off-by: Naman Sood <mail@nsood.in>	11 months ago
Maisem Ali	62d580f0e8	util/linuxfw: add missing error checks in tests This would surface as panics when run on Fly. Still fail, but at least don't panic. Updates #10003 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	c3a8e63100	util/linuxfw: add additional nftable detection logic We were previously using the netlink API to see if there are chains/rules that already exist. This works fine in environments where there is either full nftable support or no support at all. However, we have identified certain environments which have partial nftable support and the only feasible way of detecting such an environment is to try to create some of the chains that we need. This adds a check to create a dummy postrouting chain which is immediately deleted. The goal of the check is to ensure we are able to use nftables and that it won't error out later. This check is only done in the path where we detected that the system has no preexisting nftable rules. Updates #5621 Updates #8555 Updates #8762 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	b47cf04624	util/linuxfw: fix broken tests These tests were broken at HEAD. CI currently does not run these as root, will figure out how to do that in a followup. Updates #5621 Updates #8555 Updates #8762 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	fbfee6a8c0	cmd/containerboot: use linuxfw.NetfilterRunner This migrates containerboot to reuse the NetfilterRunner used by tailscaled instead of manipulating iptables rule itself. This has the added advantage of now working with nftables and we can potentially drop the `iptables` command from the container image in the future. Updates #9310 Co-authored-by: Irbe Krumina <irbe@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	aad3584319	util/linuxfw: move fake runner into pkg This allows using the fake runner in different packages that need to manage filter rules. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	05a1f5bf71	util/linuxfw: move detection logic Just a refactor to consolidate the firewall detection logic in a single package so that it can be reused in a later commit by containerboot. Updates #9310 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
James Tucker	ba6ec42f6d	util/linuxfw: add missing input rule to the tailscale tun Add an explicit accept rule for input to the tun interface, as a mirror to the explicit rule to accept output from the tun interface. The rule matches any packet in to our tun interface and accepts it, and the rule is positioned and prioritized such that it should be evaluated prior to conventional ufw/iptables/nft rules. Updates #391 Fixes #7332 Updates #9084 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
James Tucker	2066f9fbb2	util/linuxfw: fix crash in DelSNATRule when no rules are found Appears to be a missing nil handling case. I looked back over other usage of findRule and the others all have nil guards. findRule returns nil when no rules are found matching the arguments. Fixes #9553 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Craig Rodrigues	8452d273e3	util/linuxfw: Fix comment which lists supported linux arches Only arm64 and amd64 are supported Signed-off-by: Craig Rodrigues <rodrigc@crodrigues.org>	1 year ago
Craig Rodrigues	8683ce78c2	client/web, clientupdate, util/linuxfw, wgengine/magicsock: Use %v verb for errors Replace %w verb with %v verb when logging errors. Use %w only for wrapping errors with fmt.Errorf() Fixes: #9213 Signed-off-by: Craig Rodrigues <rodrigc@crodrigues.org>	1 year ago
Brad Fitzpatrick	1b223566dd	util/linuxfw: fix typo in unexported doc comment And flesh it out and use idiomatic doc style ("whether" for bools) and end in a period while there anyway. Updates #cleanup Change-Id: Ieb82f13969656e2340c3510e7b102dc8e6932611 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
KevinLiang10	b040094b90	util/linuxfw: reorganize nftables rules to allow it to work with ufw This commit tries to mimic the way iptables-nft work with the filewall rules. We follow the convention of using tables like filter, nat and the conventional chains, to make our nftables implementation work with ufw. Updates: #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
Brad Fitzpatrick	7a5263e6d0	util/linuxfw: rename ErrorFWModeNotSupported Go style is for error variables to start with "err" (or "Err") and for error types to end in "Error". Updates #cleanup Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
KevinLiang10	ae63c51ff1	wgengine/router: add auto selection heuristic for iptables/nftables This commit replaces the TS_DEBUG_USE_NETLINK_NFTABLES envknob with a TS_DEBUG_FIREWALL_MODE that should be set to either 'iptables' or 'nftables' to select firewall mode manually, other wise tailscaled will automatically choose between iptables and nftables depending on environment and system availability. updates: #319 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
Brad Fitzpatrick	88cc0ad9f7	util/linuxfw: remove yet-unused code to fix linux/arm64 crash The util/linuxfw/iptables.go had a bunch of code that wasn't yet used (in prep for future work) but because of its imports, ended up initializing code deep within gvisor that panicked on init on arm64 systems not using 4KB pages. This deletes the unused code to delete the imports and remove the panic. We can then cherry-pick this back to the branch and restore it later in a different way. A new test makes sure we don't regress in the future by depending on the panicking package in question. Fixes #8658 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
KevinLiang10	a3c7b21cd1	util/linuxfw: add nftables support This commit adds nftable rule injection for tailscaled. If tailscaled is started with envknob TS_DEBUG_USE_NETLINK_NFTABLES = true, the router will use nftables to manage firewall rules. Updates: #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
KevinLiang10	6ebd87c669	util/linuxfw: add new arch build constraints Exclide GOARCHs including: mips, mips64, mips64le, mipsle, riscv64. These archs are not supported by gvisor.dev/gvisor/pkg/hostarch. Fixes: #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
KevinLiang10	243ce6ccc1	util/linuxfw: decoupling IPTables logic from linux router This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner. For #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
Brad Fitzpatrick	eefee6f149	all: use cmpx.Or where it made sense I left a few out where writing it explicitly was better for various reasons. Updates #8296 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Andrew Dunham	6927a844b1	util/linuxfw: add build constraints excluding GOARCH=arm This isn't currently supported due to missing support in upstream dependencies, and also we don't use this package anywhere right now. Just conditionally skip this for now. Fixes #7268 Change-Id: Ie7389c2c0816b39b410c02a7276051a4c18b6450 Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Andrew Dunham	ba48ec5e39	util/linuxfw: initial implementation of package This package is an initial implementation of something that can read netfilter and iptables rules from the Linux kernel without needing to shell out to an external utility; it speaks directly to the kernel using syscalls and parses the data returned. Currently this is read-only since it only knows how to parse a subset of the available data. Signed-off-by: Andrew Dunham <andrew@tailscale.com> Change-Id: Iccadf5dcc081b73268d8ccf8884c24eb6a6f1ff5	2 years ago

49 Commits (fe830a744b7662c3e1a328adbbf460abd4888372)