287 Commits (fe50ded95c237e59f0c7018c90392949f31e6198)

Author	SHA1	Message	Date
Josh Bleecher Snyder	fe50ded95c	health: track whether we have a functional udp4 bind ... Suggested-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	7dc7078d96	wgengine/magicsock: use netaddr.IP in listenPacket ... It must be an IP address; enforce that at the type level. Suggested-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	3c543c103a	wgengine/magicsock: unify initial bind and rebind ... We had two separate code paths for the initial UDP listener bind and any subsequent rebinds. IPv6 got left out of the rebind code. Rather than duplicate it there, unify the two code paths. Then improve the resulting code: * Rebind had nested listen attempts to try the user-specified port first, and then fall back to :0 if that failed. Convert that into a loop. * Initial bind tried only the user-specified port. Rebind tried the user-specified port and 0. But there are actually three ports of interest: The one the user specified, the most recent port in use, and 0. We now try all three in order, as appropriate. * In the extremely rare case in which binding to port 0 fails, use a dummy net.PacketConn whose reads block until close. This will keep the wireguard-go receive func goroutine alive. As a pleasant side-effect of this, if we decide that we need to resuscitate #1796, it will now be much easier. Fixes #1799 Co-authored-by: David Anderson <danderson@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	8fb66e20a4	wgengine/magicsock: remove DefaultPort const ... Assume it'll stay at 0 forever, so hard-code it and delete code conditional on it being non-0. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	a8f61969b9	wgengine/magicsock: remove context arg from listenPacket ... It was set to context.Background by all callers, for the same reasons. Set it locally instead, to simplify call sites. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	744de615f1	health, wgenegine: fix receive func health checks for the fourth time ... The old implementation knew too much about how wireguard-go worked. As a result, it missed genuine problems that occurred due to unrelated bugs. This fourth attempt to fix the health checks takes a black box approach. A receive func is healthy if one (or both) of these conditions holds: * It is currently running and blocked. * It has been executed recently. The second condition is required because receive functions are not continuously executing. wireguard-go calls them and then processes their results before calling them again. There is a theoretical false positive if wireguard-go go takes longer than one minute to process the results of a receive func execution. If that happens, we have other problems. Updates #1790 Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	0d4c8cb2e1	health: delete ReceiveFunc health checks ... They were not doing their job. They need yet another conceptual re-think. Start by clearing the decks. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	8d7f7fc7ce	health, wgenegine: fix receive func health checks yet again ... The existing implementation was completely, embarrassingly conceptually broken. We aren't able to see whether wireguard-go's receive function goroutines are running or not. All we can do is model that based on what we have done. This commit fixes that model. Fixes #1781 Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	5835a3f553	health, wgengine/magicsock: avoid receive function false positives ... Avery reported a sub-ms health transition from "receiveIPv4 not running" to "ok". To avoid these transient false-positives, be more precise about the expected lifetime of receive funcs. The problematic case is one in which they were started but exited prior to a call to connBind.Close. Explicitly represent started vs running state, taking care with the order of updates. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	f845aae761	health: track whether magicsock receive functions are running ... Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	48e30bb8de	wgengine/magicsock: remove named return ... Doesn't add anything. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	a2a2c0ce1c	wgengine/magicsock: fix two comments ... Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	b1e624ef04	wgengine/magicsock: remove unnecessary type assertions ... Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	98714e784b	wgengine/magicsock: improve Rebind logging ... We were accidentally logging oldPort -> oldPort. Log oldPort as well as c.port; if we failed to get the preferred port in a previous rebind, oldPort might differ from c.port. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	15ceacc4c5	wgengine/magicsock: accept a host and port instead of an addr in listenPacket ... This simplifies call sites and prevents accidental failure to use net.JoinHostPort. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Brad Fitzpatrick	b993d9802a	ipn/ipnlocal, etc: require file sharing capability to send/recv files ... tailscale/corp#1582 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	762180595d	ipn/ipnstate: add PeerStatus.TailscaleIPs slice, deprecate TailAddr ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	34d2f5a3d9	tailcfg: add Endpoint, EndpointType, MapRequest.EndpointType ... Track endpoints internally with a new tailcfg.Endpoint type that includes a typed netaddr.IPPort (instead of just a string) and includes a type for how that endpoint was discovered (STUN, local, etc). Use []tailcfg.Endpoint instead of []string internally. At the last second, send it to the control server as the existing []string for endpoints, but also include a new parallel MapRequest.EndpointType []tailcfg.EndpointType, so the control server can start filtering out less-important endpoint changes from new-enough clients. Notably, STUN-discovered endpoints can be filtered out from 1.6+ clients, as they can discover them amongst each other via CallMeMaybe disco exchanges started over DERP. And STUN endpoints change a lot, causing a lot of MapResposne updates. But portmapped endpoints are worth keeping for now, as they they work right away without requiring the firewall traversal extra RTT dance. End result will be less control->client bandwidth. (despite negligible increase in client->control bandwidth) Updates tailscale/corp#1543 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	ba72126b72	wgengine/magicsock: remove RebindingUDPConn.FakeClosed ... It existed to work around the frequent opening and closing of the conn.Bind done by wireguard-go. The preceding commit removed that behavior, so we can simply close the connections when we are done with them. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	b3ceca1dd7	wgengine/...: split into multiple receive functions ... Upstream wireguard-go has changed its receive model. NewDevice now accepts a conn.Bind interface. The conn.Bind is stateless; magicsock.Conns are stateful. To work around this, we add a connBind type that supports cheap teardown and bring-up, backed by a Conn. The new conn.Bind allows us to specify a set of receive functions, rather than having to shoehorn everything into ReceiveIPv4 and ReceiveIPv6. This lets us plumbing DERP messages directly into wireguard-go, instead of having to mux them via ReceiveIPv4. One consequence of the new conn.Bind layer is that closing the wireguard-go device is now indistinguishable from the routine bring-up and tear-down normally experienced by a conn.Bind. We thus have to explicitly close the magicsock.Conn when the close the wireguard-go device. One downside of this change is that we are reliant on wireguard-go to call receiveDERP to process DERP messages. This is fine for now, but is perhaps something we should fix in the future. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	1df162b05b	wgengine/magicsock: adapt CreateEndpoint signature to match wireguard-go ... Part of a temporary change to make merging wireguard-go easier. See https://github.com/tailscale/wireguard-go/pull/45. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	81143b6d9a	ipn/ipnlocal: start of peerapi between nodes ... Also some necessary refactoring of the ipn/ipnstate too. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c99f260e40	wgengine/magicsock: prefer IPv6 transport if roughly equivalent latency ... Fixes #1566 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	9643d8b34d	wgengine/magicsock: add an addrLatency type to combine an IPPort+time.Duration ... Updates #1566 (but no behavior changes as of this change) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	0994a9f7c4	wgengine{,/magicsock}: fix, improve "tailscale ping" to default routes and subnets ... e.g. $ tailscale ping 1.1.1.1 exit node found but not enabled $ tailscale ping 10.2.200.2 node "tsbfvlan2" found, but not using its 10.2.200.0/24 route $ sudo tailscale up --accept-routes $ tailscale ping 10.2.200.2 pong from tsbfvlan2 (100.124.196.94) via 10.2.200.34:41641 in 1ms $ tailscale ping mon.ts.tailscale.com pong from monitoring (100.88.178.64) via DERP(sfo) in 83ms pong from monitoring (100.88.178.64) via DERP(sfo) in 21ms pong from monitoring (100.88.178.64) via [2604:a880:4:d1::37:d001]:41641 in 22ms This necessarily moves code up from magicsock to wgengine, so we can look at the actual wireguard config. Fixes #1564 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7e0d12e7cc	wgengine/magicsock: don't update control if only endpoint order changes ... Updates #1559 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	32562a82a9	wgengine/magicsock: annotate a few more disco logs as verbose ... Fixes #1540 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ba8c6d0775	health, controlclient, ipn, magicsock: tell health package state of things ... Not yet checking anything. Just plumbing states into the health package. Updates #1505 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	44ab0acbdb	net/portmapper, wgengine/monitor: cache gateway IP info until link changes ... Cuts down allocs & CPU in steady state (on regular STUN probes) when network is unchanging. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c81814e4f8	derp{,/derphttp},magicsock: tell DERP server when ping acks can be expected ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c576fea60e	wgengine/magicsock: delete unused WhoIs method that was moved elsewhere ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ef7bac2895	tailcfg, net/portmapper, wgengine/magicsock: add NetInfo.HavePortMap ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	79d8288f0a	wgengine/magicsock, derp, derp/derphttp: respond to DERP server->client pings ... No server support yet, but we want Tailscale 1.6 clients to be able to respond to them when the server can do it. Updates #1310 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	387e83c8fe	wgengine/magicsock: fix Conn.Rebind race that let ErrClosed errors be read ... There was a logical race where Conn.Rebind could acquire the RebindingUDPConn mutex, close the connection, fail to rebind, release the mutex, and then because the mutex was no longer held, ReceiveIPv4 wouldn't retry reads that failed with net.ErrClosed, letting that error back to wireguard-go, which would then stop running that receive IP goroutine. Instead, keep the RebindingUDPConn mutex held for the entirety of the replacement in all cases. Updates tailscale/corp#1289 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c445e3d327	wgengine/magicsock: fix typo in comment	3 years ago
Brad Fitzpatrick	a6d098c750	wgengine/magicsock: log when DERP connection succeeds ... Updates #1310	3 years ago
Brad Fitzpatrick	829eb8363a	net/interfaces: sort returned addresses from LocalAddresses ... Also change the type to netaddr.IP while here, because it made sorting easier. Updates tailscale/corp#1397 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c3e5903b91	wgengine/magicsock: remove leftover portmapper debug logging ... It's already logged at the right time in logEndpointChange. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ea3715e3ce	wgengine/magicsock: remove TODO about endpoints-over-DERP ... It was done in Tailscale 1.4 with CallMeMaybe disco messages containing endpoints. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e9e4f1063d	wgengine/magicsock: fix discoEndpoint caching bug when a node key changes ... Fixes #1391 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c64bd587ae	net/portmapper: add NAT-PMP client, move port mapping service probing ... * move probing out of netcheck into new net/portmapper package * use PCP ANNOUNCE op codes for PCP discovery, rather than causing short-lived (sub-second) side effects with a 1-second-expiring map + delete. * track when we heard things from the router so we can be less wasteful in querying the router's port mapping services in the future * use portmapper from magicsock to map a public port Fixes #1298 Fixes #1080 Fixes #1001 Updates #864 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	1632f9fd6b	wgengine/magicsock: reduce log spam during tests ... Only do the type assertion to *net.UDPAddr when addr is non-nil. This prevents a bunch of log spam during tests.	3 years ago
Josh Bleecher Snyder	88586ec4a4	wgengine/magicsock: remove an alloc from ReceiveIPvN ... We modified the standard net package to not allocate a *net.UDPAddr during a call to (*net.UDPConn).ReadFromUDP if the caller's use of the *net.UDPAddr does not cause it to escape. That is https://golang.org/cl/291390. This is the companion change to magicsock. There are two changes required. First, call ReadFromUDP instead of ReadFrom, if possible. ReadFrom returns a net.Addr, which is an interface, which always allocates. Second, reduce the lifetime of the returned *net.UDPAddr. We do this by immediately converting it into a netaddr.IPPort. We left the existing RebindingUDPConn.ReadFrom method in place, as it is required to satisfy the net.PacketConn interface. With the upstream change and both of these fixes in place, we have removed one large allocation per packet received. name old time/op new time/op delta ReceiveFrom-8 16.7µs ± 5% 16.4µs ± 8% ~ (p=0.310 n=5+5) name old alloc/op new alloc/op delta ReceiveFrom-8 112B ± 0% 64B ± 0% -42.86% (p=0.008 n=5+5) name old allocs/op new allocs/op delta ReceiveFrom-8 3.00 ± 0% 2.00 ± 0% -33.33% (p=0.008 n=5+5) Co-authored-by: Sonia Appasamy <sonia@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	0c673c1344	wgengine/magicsock: unify on netaddr types in addrSet ... addrSet maintained duplicate lists of netaddr.IPPorts and net.UDPAddrs. Unify to use the netaddr type only. This makes (*Conn).ReceiveIPvN a bit uglier, but that'll be cleaned up in a subsequent commit. This is preparatory work to remove an allocation from ReceiveIPv4. Co-authored-by: Sonia Appasamy <sonia@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	7e201806b1	wgengine/magicsock: reconnect to DERP home after network comes back up ... Updates #1310	3 years ago
Brad Fitzpatrick	9b4e50cec0	wgengine/magicsock: fix typo in comment	3 years ago
Brad Fitzpatrick	6b365b0239	wgengine/magicsock: fix DERP reader hang regression during concurrent reads ... Fixes #1282 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	6d2b8df06d	wgengine/magicsock: add disabled failing (deadlocking) test for #1282 ... The fix can make this test run unconditionally. This moves code from 5c619882bc for testability but doesn't fix it yet. The #1282 problem remains (when I wrote its wake-up mechanism, I forgot there were N DERP readers funneling into 1 UDP reader, and the code just isn't correct at all for that case). Also factor out some test helper code from BenchmarkReceiveFrom. The refactoring in magicsock.go for testability should have no behavior change.	3 years ago
Brad Fitzpatrick	1e7a35b225	types/netmap: split controlclient.NetworkMap off into its own leaf package ... Updates #1278 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	6064b6ff47	wgengine/wgcfg/nmcfg: split control/controlclient/netmap.go into own package ... It couldn't move to ipnlocal due to test dependency cycles. Updates #1278 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago