537 Commits (ec1e67b1ab6876cfc3f18b0c427acf3e62c8ed93)

Author	SHA1	Message	Date
Josh Bleecher Snyder	28af46fb3b	wgengine: pass logger as a separate arg to device.NewDevice ... Adapt to minor API changes in wireguard-go. And factor out device.DeviceOptions variables. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	4b77eca2de	wgengine/magicsock: check returned error in addTestEndpoint ... Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	c99f260e40	wgengine/magicsock: prefer IPv6 transport if roughly equivalent latency ... Fixes #1566 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	9643d8b34d	wgengine/magicsock: add an addrLatency type to combine an IPPort+time.Duration ... Updates #1566 (but no behavior changes as of this change) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	0994a9f7c4	wgengine{,/magicsock}: fix, improve "tailscale ping" to default routes and subnets ... e.g. $ tailscale ping 1.1.1.1 exit node found but not enabled $ tailscale ping 10.2.200.2 node "tsbfvlan2" found, but not using its 10.2.200.0/24 route $ sudo tailscale up --accept-routes $ tailscale ping 10.2.200.2 pong from tsbfvlan2 (100.124.196.94) via 10.2.200.34:41641 in 1ms $ tailscale ping mon.ts.tailscale.com pong from monitoring (100.88.178.64) via DERP(sfo) in 83ms pong from monitoring (100.88.178.64) via DERP(sfo) in 21ms pong from monitoring (100.88.178.64) via [2604:a880:4:d1::37:d001]:41641 in 22ms This necessarily moves code up from magicsock to wgengine, so we can look at the actual wireguard config. Fixes #1564 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	7e0d12e7cc	wgengine/magicsock: don't update control if only endpoint order changes ... Updates #1559 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	32562a82a9	wgengine/magicsock: annotate a few more disco logs as verbose ... Fixes #1540 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c19ed37b0f	wgengine/magicsock: mark some legacy debug log output as verbose ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ba8c6d0775	health, controlclient, ipn, magicsock: tell health package state of things ... Not yet checking anything. Just plumbing states into the health package. Updates #1505 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	44ab0acbdb	net/portmapper, wgengine/monitor: cache gateway IP info until link changes ... Cuts down allocs & CPU in steady state (on regular STUN probes) when network is unchanging. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c81814e4f8	derp{,/derphttp},magicsock: tell DERP server when ping acks can be expected ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c576fea60e	wgengine/magicsock: delete unused WhoIs method that was moved elsewhere ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ef7bac2895	tailcfg, net/portmapper, wgengine/magicsock: add NetInfo.HavePortMap ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	79d8288f0a	wgengine/magicsock, derp, derp/derphttp: respond to DERP server->client pings ... No server support yet, but we want Tailscale 1.6 clients to be able to respond to them when the server can do it. Updates #1310 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	387e83c8fe	wgengine/magicsock: fix Conn.Rebind race that let ErrClosed errors be read ... There was a logical race where Conn.Rebind could acquire the RebindingUDPConn mutex, close the connection, fail to rebind, release the mutex, and then because the mutex was no longer held, ReceiveIPv4 wouldn't retry reads that failed with net.ErrClosed, letting that error back to wireguard-go, which would then stop running that receive IP goroutine. Instead, keep the RebindingUDPConn mutex held for the entirety of the replacement in all cases. Updates tailscale/corp#1289 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c445e3d327	wgengine/magicsock: fix typo in comment	4 years ago
Brad Fitzpatrick	a6d098c750	wgengine/magicsock: log when DERP connection succeeds ... Updates #1310	4 years ago
Brad Fitzpatrick	829eb8363a	net/interfaces: sort returned addresses from LocalAddresses ... Also change the type to netaddr.IP while here, because it made sorting easier. Updates tailscale/corp#1397 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c3e5903b91	wgengine/magicsock: remove leftover portmapper debug logging ... It's already logged at the right time in logEndpointChange. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ea3715e3ce	wgengine/magicsock: remove TODO about endpoints-over-DERP ... It was done in Tailscale 1.4 with CallMeMaybe disco messages containing endpoints. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	2404c0ffad	ipn/ipnlocal: only filter out default routes when computing the local wg config. ... UIs need to see the full unedited netmap in order to know what exit nodes they can offer to the user. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	e9e4f1063d	wgengine/magicsock: fix discoEndpoint caching bug when a node key changes ... Fixes #1391 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c64bd587ae	net/portmapper: add NAT-PMP client, move port mapping service probing ... * move probing out of netcheck into new net/portmapper package * use PCP ANNOUNCE op codes for PCP discovery, rather than causing short-lived (sub-second) side effects with a 1-second-expiring map + delete. * track when we heard things from the router so we can be less wasteful in querying the router's port mapping services in the future * use portmapper from magicsock to map a public port Fixes #1298 Fixes #1080 Fixes #1001 Updates #864 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	c7e5ab8094	wgengine/magicsock: retry and re-send packets in TestTwoDevicePing ... When a handshake race occurs, a queued data packet can get lost. TestTwoDevicePing expected that the very first data packet would arrive. This caused occasional flakes. Change TestTwoDevicePing to repeatedly re-send packets and succeed when one of them makes it through. This is acceptable (vs making WireGuard not drop the packets) because this only affects communication with extremely old clients. And those extremely old clients will eventually connect, because the kernel will retry sends on timeout. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	1632f9fd6b	wgengine/magicsock: reduce log spam during tests ... Only do the type assertion to *net.UDPAddr when addr is non-nil. This prevents a bunch of log spam during tests.	4 years ago
Josh Bleecher Snyder	88586ec4a4	wgengine/magicsock: remove an alloc from ReceiveIPvN ... We modified the standard net package to not allocate a *net.UDPAddr during a call to (*net.UDPConn).ReadFromUDP if the caller's use of the *net.UDPAddr does not cause it to escape. That is https://golang.org/cl/291390. This is the companion change to magicsock. There are two changes required. First, call ReadFromUDP instead of ReadFrom, if possible. ReadFrom returns a net.Addr, which is an interface, which always allocates. Second, reduce the lifetime of the returned *net.UDPAddr. We do this by immediately converting it into a netaddr.IPPort. We left the existing RebindingUDPConn.ReadFrom method in place, as it is required to satisfy the net.PacketConn interface. With the upstream change and both of these fixes in place, we have removed one large allocation per packet received. name old time/op new time/op delta ReceiveFrom-8 16.7µs ± 5% 16.4µs ± 8% ~ (p=0.310 n=5+5) name old alloc/op new alloc/op delta ReceiveFrom-8 112B ± 0% 64B ± 0% -42.86% (p=0.008 n=5+5) name old allocs/op new allocs/op delta ReceiveFrom-8 3.00 ± 0% 2.00 ± 0% -33.33% (p=0.008 n=5+5) Co-authored-by: Sonia Appasamy <sonia@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	0c673c1344	wgengine/magicsock: unify on netaddr types in addrSet ... addrSet maintained duplicate lists of netaddr.IPPorts and net.UDPAddrs. Unify to use the netaddr type only. This makes (*Conn).ReceiveIPvN a bit uglier, but that'll be cleaned up in a subsequent commit. This is preparatory work to remove an allocation from ReceiveIPv4. Co-authored-by: Sonia Appasamy <sonia@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	4cd9218351	wgengine/magicsock: prevent logging while running benchmarks ... Co-authored-by: Sonia Appasamy <sonia@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	635e4c7435	wgengine/magicsock: increase legacy ping timeout again ... I based my estimation of the required timeout based on locally observed behavior. But CI machines are worse than my local machine. 16s was enough to reduce flakiness but not eliminate it. Bump it up again. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	7e201806b1	wgengine/magicsock: reconnect to DERP home after network comes back up ... Updates #1310	4 years ago
Brad Fitzpatrick	9b4e50cec0	wgengine/magicsock: fix typo in comment	4 years ago
Brad Fitzpatrick	6b365b0239	wgengine/magicsock: fix DERP reader hang regression during concurrent reads ... Fixes #1282 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	e1f773ebba	wgengine/magicsock: allow more time for pings to transit ... We removed the "fast retry" code from our wireguard-go fork. As a result, pings can take longer to transit when retries are required. Allow that. Fixes #1277 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	6d2b8df06d	wgengine/magicsock: add disabled failing (deadlocking) test for #1282 ... The fix can make this test run unconditionally. This moves code from 5c619882bc for testability but doesn't fix it yet. The #1282 problem remains (when I wrote its wake-up mechanism, I forgot there were N DERP readers funneling into 1 UDP reader, and the code just isn't correct at all for that case). Also factor out some test helper code from BenchmarkReceiveFrom. The refactoring in magicsock.go for testability should have no behavior change.	4 years ago
Brad Fitzpatrick	1e7a35b225	types/netmap: split controlclient.NetworkMap off into its own leaf package ... Updates #1278 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	6064b6ff47	wgengine/wgcfg/nmcfg: split control/controlclient/netmap.go into own package ... It couldn't move to ipnlocal due to test dependency cycles. Updates #1278 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	ace57d7627	wgengine/magicsock: set a dummy private key in benchmark. ... Magicsock started dropping all traffic internally when Tailscale is shut down, to avoid spurious wireguard logspam. This made the benchmark not receive anything. Setting a dummy private key is sufficient to get magicsock to pass traffic for benchmarking purposes. Fixes #1270. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	f7eed25bb9	wgengine/magicsock: filter disco packets and packets when stopped from wireguard ... Fixes #1167 Fixes tailscale/corp#219 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	e8cd7bb66f	tstest: simplify goroutine leak tests ... Use tb.Cleanup to simplify both the API and the implementation. One behavior change: When the number of goroutines shrinks, don't log. I've never found these logs to be useful, and they frequently add noise. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	dd10babaed	wgenginer/magicsock: remove Addrs methods ... They are now unused. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	fe7c3e9c17	all: move wgcfg from wireguard-go ... This is mostly code movement from the wireguard-go repo. Most of the new wgcfg package corresponds to the wireguard-go wgcfg package. wgengine/wgcfg/device{_test}.go was device/config{_test}.go. There were substantive but simple changes to device_test.go to remove internal package device references. The API of device.Config (now wgcfg.DeviceConfig) grew an error return; we previously logged the error and threw it away. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	d5baeeed5c	wgengine: use Tailscale-style peer identifiers in logs ... Rewrite log lines on the fly, based on the set of known peers. This enables us to use upstream wireguard-go logging, but maintain the Tailscale-style peer public key identifiers that the rest of our systems (and people) expect. Fixes #1183 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	9541886856	wgengine/magicsock: disable regular STUNs for all platforms by default ... Reduces background CPU & network. Updates #1034 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c55d26967b	wgengine/magicsock: log more details of endpoints learned over disco ... Also, don't try to use IPv6 LinkLocalUnicast addresses for now. Like endpoints exchanged with control, we share them but don't yet use them. Updates #1172	4 years ago
Brad Fitzpatrick	359055d3fa	wgengine/magicsock: fix logging regression ... c8c493f3d9 made it always say `created=false` which scared me when I saw it, as that would've implied things were broken much worse. Fortunately the logging was just wrong.	4 years ago
Brad Fitzpatrick	edf64e0901	wgengine/magicsock: send, use endpoints in CallMeMaybe messages ... Fixes #1172 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	b5b4992eff	disco: support parsing/encoding endpoints in call-me-maybe frames ... Updates #1172 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	d3dd7c6270	wgengine/magicsock: make legacy DstToString match Addrs ... DstToString is used in two places in wireguard-go: Logging and uapi. We are switching to use uapi for wireguard-go config. To preserve existing behavior, we need the full set of addrs. And for logging, having the full set of addrs seems useful. (The Addrs method itself is slated for removal. When that happens, the implementation will move to DstToString.) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	187e22a756	wgengine/magicsock: don't run the DERP cleanup so often ... To save CPU and wakeups, don't run the DERP cleanup timer regularly unless there is a non-home DERP connection open. Also eliminates the goroutine, moving to a time.AfterFunc. Updates #1034 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	5fe5402fcd	Revert "wgengine/magicsock: shortcircuit discoEndpoint.heartbeat when its connection is closed" ... This reverts commit 08baa17d9a. It caused deadlocks due to lock ordering violations. It was not the right fix, and thus should simply be reverted while we look for the right fix (if we haven't already found it in the interim; we've fixed other logging-after-test issues). Fixes #1161	4 years ago
Josh Bleecher Snyder	e4c075cd95	wgengine/magicsock: prevent log-after-test in TestTwoDevicePing	4 years ago
Brad Fitzpatrick	edce91a8a6	wgengine/magicsock: fix a naked return bug/crash where we returned (nil, true) ... The 'ok' from 'ipp, ok :=' above was the result parameter ok. Whoops.	4 years ago
Brad Fitzpatrick	51bd1feae4	wgengine/magicsock: add single element IPPort->endpoint cache in receive path ... name old time/op new time/op delta ReceiveFrom-4 21.8µs ± 2% 20.9µs ± 2% -4.27% (p=0.000 n=10+10) Updates #414 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	5c619882bc	wgengine/magicsock: simplify ReceiveIPv4+DERP path ... name old time/op new time/op delta ReceiveFrom-4 35.8µs ± 3% 21.9µs ± 5% -38.92% (p=0.008 n=5+5) Fixes #1145 Updates #414 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	3fa86a8b23	wgengine/magicsock: use relatively new netaddr.IPPort.IsZero method	4 years ago
Brad Fitzpatrick	4811236189	wgengine/magicsock: speed up BenchmarkReceiveFrom, store context.Done chan ... context.cancelCtx.Done involves a mutex and isn't as cheap as I previously assumed. Convert the donec method into a struct field and store the channel value once. Our one magicsock.Conn gets one pointer larger, but it cuts ~1% of the CPU time of the ReceiveFrom benchmark and removes a bubble from the --svg output :)	4 years ago
Josh Bleecher Snyder	ed2169ae99	wgengine/magicsock: prevent logging after TestActiveDiscovery completes	4 years ago
Josh Bleecher Snyder	63af950d8c	wgengine/magicsock: adapt to wireguard-go without UpdateDst ... 22507adf54 stopped relying on our fork of wireguard-go's UpdateDst callback. As a result, we can unwind that code, and the extra return value of ReceiveIPv{4,6}. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Denton Gentry	23c2dc2165	magicksock: remove TestConnClosing. (#1140) ... Test is flakey, remove it and figure out what to do differently later. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
David Anderson	e23b4191c4	wgengine/magicsock: disable legacy networking everywhere except TwoDevicePing. ... TwoDevicePing is explicitly testing the behavior of the legacy codepath, everything else is happy to assume that code no longer exists. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	0733c5d2e0	wgengine/magicsock: disable legacy behavior in a few more tests. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	57d95dd005	wgengine/magicsock: default legacy networking to off for some tests. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	a2463e8948	wgengine/magicsock: add an option to disable legacy peer handling. ... Used in tests to ensure we're not relying on behavior we're going to remove eventually. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	d456bfdc6d	wgengine/magicsock: fix BenchmarkReceiveFrom. ... Previously, this benchmark relied on behavior of the legacy receive codepath, which I changed in 22507adf. With this change, the benchmark instead relies on the new active discovery path. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	2d837f79dc	wgengine/magicsock: close test loggers once we're done with them ... This is a big hammer approach to helping with #1132. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	08baa17d9a	wgengine/magicsock: shortcircuit discoEndpoint.heartbeat when its connection is closed ... This prevents us from continuing to do unnecessary work (including logging) after the connection has closed. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	7c76435bf7	wgengine/magicsock: simplify ... Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	d2529affa2	wgengine/magicsock: quiet wireguard-go logging in tests ... We already do this in newUserspaceEngineAdvanced. Apply it to newMagicStack as well. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	654b5f1570	all: convert from []wgcfg.Endpoint to string ... This eliminates a dependency on wgcfg.Endpoint, as part of the effort to eliminate our wireguard-go fork. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	9abcb18061	wgengine/magicsock: import more of wireguard-go, update docstrings. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	22507adf54	wgengine/magicsock: stop depending on UpdateDst in legacy codepaths. ... This makes connectivity between ancient and new tailscale nodes slightly worse in some cases, but only in cases where the ancient version would likely have failed to get connectivity anyway. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Denton Gentry	8349e10907	magicsock: add description of testClosingContext ... Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Denton Gentry	2e9728023b	magicsock: test error case in sendDiscoMessage ... In sendDiscoMessage there is a check of whether the connection is closed, which is not being reliably exercised by other tests. This shows up in code coverage reports, the lines of code in sendDiscoMessage are alternately added and subtracted from code coverage. Add a test to specifically exercise and verify this code path. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Denton Gentry	0aa55bffce	magicsock: test error case in derpWriteChanOfAddr ... In derpWriteChanOfAddr when we call derphttp.NewRegionClient(), there is a check of whether the connection is already errored and if so it returns before grabbing the lock. The lock might already be held and would be a deadlock. This corner case is not being reliably exercised by other tests. This shows up in code coverage reports, the lines of code in derpWriteChanOfAddr are alternately added and subtracted from code coverage. Add a test to specifically exercise this code path, and verify that it doesn't deadlock. This is the best tradeoff I could come up with: + the moment code calls Err() to check if there is an error, we grab the lock to make sure it would deadlock if it tries to grab the lock itself. + if a new call to Err() is added in this code path, only the first one will be covered and the rest will not be tested. + this test doesn't verify whether code is checking for Err() in the right place, which ideally I guess it would. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Brad Fitzpatrick	85e54af0d7	wgengine: on TCP connect fail/timeout, log some clues about why it failed ... So users can see why things aren't working. A start. More diagnostics coming. Updates #1094	4 years ago
Brad Fitzpatrick	f85769b1ed	wgengine/magicsock: drop netaddr.IPPort cache ... netaddr.IP no longer allocates, so don't need a cache or all its associated code/complexity. This totally removes groupcache/lru from the deps. Also go mod tidy.	4 years ago
Brad Fitzpatrick	5aa5db89d6	cmd/tailscaled, wgengine/netstack: add start of gvisor userspace netstack work ... Not usefully functional yet (mostly a proof of concept), but getting it submitted for some work @namansood is going to do atop this. Updates #707 Updates #634 Updates #48 Updates #835	4 years ago
Brad Fitzpatrick	5efb0a8bca	cmd/tailscale: change formatting of "tailscale status" ... * show DNS name over hostname, removing domain's common MagicDNS suffix. only show hostname if there's no DNS name. but still show shared devices' MagicDNS FQDN. * remove nerdy low-level details by default: endpoints, DERP relay, public key. They're available in JSON mode still for those who need them. * only show endpoint or DERP relay when it's active with the goal of making debugging easier. (so it's easier for users to understand what's happening) The asterisks are gone. * remove Tx/Rx numbers by default for idle peers; only show them when there's traffic. * include peers' owner login names * add CLI option to not show peers (matching --self=true, --peers= also defaults to true) * sort by DNS/host name, not public key * reorder columns	4 years ago
Brad Fitzpatrick	b5b9866ba2	wgengine/magicsock: copy self DNS name to PeerStatus, re-fill OS ... The OS used to be sent back from the server but that has since been removed as being redundant.	4 years ago
David Anderson	86fe22a1b1	Update netaddr, and adjust wgengine/magicsock due to API change. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	56a7652dc9	wgkey: new package ... This is a replacement for the key-related parts of the wireguard-go wgcfg package. This is almost a straight copy/paste from the wgcfg package. I have slightly changed some of the exported functions and types to avoid stutter, added and tweaked some comments, and removed some now-unused code. To avoid having wireguard-go depend on this new package, wgcfg will keep its key types. We translate into and out of those types at the last minute. These few remaining uses will be eliminated alongside the rest of the wgcfg package. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	2fe770ed72	all: replace wgcfg.IP and wgcfg.CIDR with netaddr types ... Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	053a1d1340	all: annotate log verbosity levels on most egregiously spammy log prints ... Fixes #924 Fixes #282 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	294ceb513c	ipn, wgengine/magicsock: fix `tailscale status` display. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	c8c493f3d9	wgengine/magicsock: make ReceiveIPv4 a little easier to follow. ... The previous code used a lot of whole-function variables and shared behavior that only triggered based on prior action from a single codepath. Instead of that, move the small amounts of "shared" code into each switch case. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	0ad109f63d	wgengine/magicsock: move legacy endpoint creation into legacy.go. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	f873da5b16	wgengine/magicsock: move more legacy endpoint handling. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	58fcd103c4	wgengine/magicsock: move legacy sending code to legacy.go. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	65ae66260f	wgengine/magicsock: unexport AddrSet. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	c9b9afd761	wgengine/magicsock: move most legacy nat traversal bits to another file. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	554a20becb	wgengine/magicsock: only log about lazy config when actually doing lazy config. ... Before, tailscaled would log every 10 seconds when the periodic noteRecvActivity call happens. This is noisy, but worse it's misleading, because the message suggests that the disco code is starting a lazy config run for a missing peer, whereas in fact it's just an internal piece of keepalive logic. With this change, we still log when going from 0->1 tunnel for the peer, but not every 10s thereafter. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	fa412c8760	wgengine/filter, wgengine/magicsock: use new IP.BitLen to simplify some code	4 years ago
David Anderson	9cee0bfa8c	wgengine/magicsock: sprinkle more docstrings. ... Magicsock is too damn big, but this might help me page it back in faster next time. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	7b92f8e718	wgengine/magicsock: add start of magicsock benchmarks (Conn.ReceiveIPv4 for now) ... And only single-threaded for now. Will get fancier later. Updates #414	4 years ago
Brad Fitzpatrick	713cbe84c1	wgengine/magicsock: use net.JoinHostPort when host might have colons (udp6) ... Only affected tests. (where it just generated log spam)	4 years ago
Brad Fitzpatrick	450cfedeba	wgengine/magicsock: quiet an IPv6 warning in tests ... In tests, we force binding to localhost to avoid OS firewall warning dialogs. But for IPv6, we were trying (and failing) to bind to 127.0.0.1. You'd think we'd just say "localhost", but that's apparently ill defined. See https://tools.ietf.org/html/draft-ietf-dnsop-let-localhost-be-localhost and golang/go#22826. (It's bitten me in the past, but I can't remember specific bugs.) So use "::1" explicitly for "udp6", which makes the test quieter.	4 years ago
David Anderson	7a54910990	wgengine/filter: remove helper vars, mark NewAllowAll test-only. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	b3634f020d	wgengine/filter: use netaddr types in public API. ... We still use the packet.* alloc-free types in the data path, but the compilation from netaddr to packet happens within the filter package. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	fd2a30cd32	wgengine/magicsock: make test pass on Windows and without firewall dialog box ... Updates #50	4 years ago
Brad Fitzpatrick	ac866054c7	wgengine/magicsock: add a backoff on DERP reconnects ... Fixes #808	4 years ago
Brad Fitzpatrick	105a820622	wgengine/magicsock: skip an endpoint update at start-up ... At startup the client doesn't yet have the DERP map so can't do STUN queries against DERP servers, so it only knows it local interface addresses, not its STUN-mapped addresses. We were reporting the interface-local addresses to control, getting the DERP map, and then immediately reporting the full set of updates. That was an extra HTTP request to control, but worse: it was an extra broadcast from control out to all the peers in the network. Now, skip the initial update if there are no stun results and we don't have a DERP map. More work remains optimizing start-up requests/map updates, but this is a start. Updates tailscale/corp#557	4 years ago
Brad Fitzpatrick	2076a50862	wgengine/magicsock: finish a comment sentence that ended prematurely	4 years ago
Brad Fitzpatrick	3e4c46259d	wgengine/magicsock: don't do netchecks either when network is down ... A continuation of 6ee219a25d Updates #640	4 years ago
Brad Fitzpatrick	6ee219a25d	ipn, wgengine, magicsock, tsdns: be quieter and less aggressive when offline ... If no interfaces are up, calm down and stop spamming so much. It was noticed as especially bad on Windows, but probably was bad everywhere. I just have the best network conditions testing on a Windows VM. Updates #604	4 years ago
Brad Fitzpatrick	c86761cfd1	Remove tuntap references. We only use TUN.	4 years ago
Christina Wen	48fbe93e72	wgengine/magicsock: clarify pre-disco 'tailscale ping' error message ... This change clarifies the error message when a user pings a peer that is using an outdated version of Tailscale.	4 years ago
Josh Bleecher Snyder	a5d701095b	wgengine/magicsock: increase test timeout to reduce flakiness ... Updates #654. See that issue for a discussion of why this timeout reduces flakiness, and what next steps are. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	0c0239242c	wgengine/magicsock: make discoPingPurpose a stringer ... It was useful for debugging once, it'll probably be useful again. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	6e38d29485	wgengine/magicsock: improve test logging output ... This fixes line numbers and reduces timestamp precision to overwhelming the output. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	57e642648f	wgengine/magicsock: fix typo in comment	4 years ago
Brad Fitzpatrick	756d6a72bd	wgengine: lazily create peer wireguard configs more explicitly ... Rather than consider bigs jumps in last-received-from activity as a signal to possibly reconfigure the set of wireguard peers to have configured, instead just track the set of peers that are currently excluded from the configuration. Easier to reason about. Also adds a bit more logging. This might fix an error we saw on a machine running a recent unstable build: 2020-08-26 17:54:11.528033751 +0000 UTC: 8.6M/92.6M magicsock: [unexpected] lazy endpoint not created for [UcppE], d:42a770f678357249 2020-08-26 17:54:13.691305296 +0000 UTC: 8.7M/92.6M magicsock: DERP packet received from idle peer [UcppE]; created=false 2020-08-26 17:54:13.691383687 +0000 UTC: 8.7M/92.6M magicsock: DERP packet from unknown key: [UcppE] If it does happen again, though, we'll have more logs.	4 years ago
halulu	f27a57911b	cmd/tailscale: add derp and endpoints status (#703) ... cmd/tailscale: add local node's information to status output (by default) RELNOTE=yes Updates #477 Signed-off-by: Halulu <lzjluzijie@gmail.com>	4 years ago
David Crawshaw	dd2c61a519	magicsock: call RequestStatus when DERP connects ... Second attempt. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
David Crawshaw	a67b174da1	Revert "magicsock: call RequestStatus when DERP connects" ... Seems to break linux CI builder. Cannot reproduce locally, so attempting a rollback. This reverts commit cd7bc02ab1. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
David Crawshaw	cd7bc02ab1	magicsock: call RequestStatus when DERP connects ... Without this, a freshly started ipn client will be stuck in the "Starting" state until something triggers a call to RequestStatus. Usually a UI does this, but until then we can sit in this state until poked by an external event, as is evidenced by our e2e tests locking up when DERP is attached. (This only recently became a problem when we enabled lazy handshaking everywhere, otherwise the wireugard tunnel creation would also trigger a RequestStatus.) Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Brad Fitzpatrick	f6dc47efe4	tailcfg, controlclient, magicsock: add control feature flag to enable DRPO ... Updates #150	4 years ago
Brad Fitzpatrick	85c3d17b3c	wgengine/magicsock: use disco ping src as a candidate endpoint ... Consider: Hard NAT (A) <---> Hard NAT w/ mapped port (B) If A sends a packet to B's mapped port, A can disco ping B directly, with low latency, without DERP. But B couldn't establish a path back to A and needed to use DERP, despite already logging about A's endpoint and adding a mapping to it for other purposes (the wireguard conn.Endpoint lookup also needed it). This adds the tracking to discoEndpoint too so it'll be used for finding a path back. Fixes tailscale/corp#556 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	0512fd89a1	wgengine/magicsock: simplify handlePingLocked ... It's no longer true that 'de may be nil'	4 years ago
Brad Fitzpatrick	84dc891843	cmd/tailscale/cli: add ping subcommand ... For example: $ tailscale ping -h USAGE ping <hostname-or-IP> FLAGS -c 10 max number of pings to send -stop-once-direct true stop once a direct path is established -verbose false verbose output $ tailscale ping mon.ts.tailscale.com pong from monitoring (100.88.178.64) via DERP(sfo) in 65ms pong from monitoring (100.88.178.64) via DERP(sfo) in 252ms pong from monitoring (100.88.178.64) via [2604:a880:2:d1::36:d001]:41641 in 33ms Fixes #661 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	9a346fd8b4	wgengine,magicsock: fix two lazy wireguard config issues ... 1) we weren't waking up a discoEndpoint that once existed and went idle for 5 minutes and then got a disco message again. 2) userspaceEngine.noteReceiveActivity had a buggy check; fixed and added a test	4 years ago
Brad Fitzpatrick	41c4560592	control/controlclient: remove unused NetworkMap.UAPI method ... And remove last remaining use of wgcfg.ToUAPI in a test's debug output; replace it with JSON.	4 years ago
Brad Fitzpatrick	cff737786e	wgengine/magicsock: fix lazy config deadlock, document more lock ordering ... This removes the atomic bool that tried to track whether we needed to acquire the lock on a future recursive call back into magicsock. Unfortunately that hack doesn't work because we also had a lock ordering issue between magicsock and userspaceEngine (see issue). This documents that too. Fixes #644	4 years ago
Brad Fitzpatrick	2bd9ad4b40	wgengine: fix deadlock between engine and magicsock	4 years ago
Brad Fitzpatrick	7c38db0c97	wgengine/magicsock: don't deadlock on pre-disco Endpoints w/ lazy wireguard configs ... Fixes tailscale/tailscale#637	4 years ago
Brad Fitzpatrick	4987a7d46c	wgengine/magicsock: when hard NAT, add stun-ipv4:static-port as candidate ... If a node is behind a hard NAT and is using an explicit local port number, assume they might've mapped a port and add their public IPv4 address with the local tailscaled's port number as a candidate endpoint.	4 years ago
Brad Fitzpatrick	bfcb0aa0be	wgengine/magicsock: deflake tests, Close deadlock again ... Better fix than 37903a9056 Fixes tailscale/corp#533	4 years ago
Dmytro Shynkevych	28e52a0492	all: dns refactor, add Proxied and PerDomain flags from control (#615) ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	cb970539a6	wgengine/magicsock: remove TODO comment that's no longer applicable	4 years ago
Brad Fitzpatrick	915f65ddae	wgengine/magicsock: stop disco activity on IPN stop ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c180abd7cf	wgengine/magicsock: merge errClosed and errConnClosed	4 years ago
Brad Fitzpatrick	d55fdd4669	wgengine/magicsock: update, flesh out a TODO	4 years ago
David Anderson	f8e4c75f6b	wgengine/magicsock: check slightly less aggressively for connectivity. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	58b721f374	wgengine/magicsock: deflake some tests with an ugly hack ... Starting with fe68841dc7, some e2e tests got flaky. Rather than debug them (they're gnarly), just revert to the old behavior as far as those tests are concerned. The tests were somehow using magicsock without a private key and expecting it to do ... something. My goal with fe68841dc7 was to stop log spam and unnecessary work I saw on the iOS app when when stopping the app. Instead, only stop doing that work on any transition from once-had-a-private-key to no-longer-have-a-private-key. That fixes what I wanted to fix while still making the mysterious e2e tests happy.	4 years ago
David Anderson	41d0c81859	wgengine/magicsock: make disco subtest name more precise. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	9beea8b314	wgengine/magicsock: remove unnecessary use of context. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	b62341d308	wgengine/magicsock: add docstring. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	9265296b33	wgengine/magicsock: don't deadlock on shutdown if sending blocks. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	0249236cc0	ipn/ipnstate: record assigned Tailscale IPs. ... wgengine/magicsock: use ipnstate to find assigned Tailscale IPs. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	c3958898f1	tstest/natlab: be a bit more lenient during test shutdown. ... There is a race in natlab where we might start shutdown while natlab is still running a goroutine or two to deliver packets. This adds a small grace period to try and receive it before continuing shutdown. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	7578c815be	wgengine/magicsock: give pinger a more generous packet timeout. ... The first packet to transit may take several seconds to do so, because setup rates in wgengine may result in the initial WireGuard handshake init to get dropped. So, we have to wait at least long enough for a retransmit to correct the fault. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	c3994fd77c	derp: remove OnlyDisco option. ... Active discovery lets us introspect the state of the network stack precisely enough that it's unnecessary, and dropping the initial DERP packets greatly slows down tests. Additionally, it's unrealistic since our production network will never deliver _only_ discovery packets, it'll be all or nothing. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	5455c64f1d	wgengine/magicsock: add a test for two facing endpoint-independent NATs. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	f794493b4f	wgengine/magicsock: explicitly check path discovery, add a firewall test. ... The test proves that active discovery can traverse two facing firewalls. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	f582eeabd1	wgengine/magicsock: add a test for active path discovery. ... Uses natlab only, because the point of this active discovery test is going to be that it should get through a lot of obstacles. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	37903a9056	wgengine/magicsock: fix occasional deadlock on Conn.Close on c.derpStarted ... The deadlock was: * Conn.Close was called, which acquired c.mu * Then this goroutine scheduled: if firstDerp { startGate = c.derpStarted go func() { dc.Connect(ctx) close(c.derpStarted) }() } * The getRegion hook for that derphttp.Client then ran, which also tries to acquire c.mu. This change makes that hook first see if we're already in a closing state and then it can pretend that region doesn't exist.	4 years ago
Brad Fitzpatrick	fe68841dc7	wgengine/magicsock: log better with less spam on transition to stopped state ... Required a minor test update too, which now needs a private key to get far enough to test the thing being tested.	4 years ago
Brad Fitzpatrick	e298327ba8	wgengine/magicsock: remove overkill, slow reflect.DeepEqual of NetworkMap ... No need to allocate or compare all the fields we don't care about.	4 years ago
David Anderson	3669296cef	wgengine/magicsock: refactor twoDevicePing to make stack construction cleaner. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	16a9cfe2f4	wgengine: configure wireguard peers lazily, as needed ... wireguard-go uses 3 goroutines per peer (with reasonably large stacks & buffers). Rather than tell wireguard-go about all our peers, only tell it about peers we're actively communicating with. That means we need hooks into magicsock's packet receiving path and tstun's packet sending path to lazily create a wireguard peer on demand from the network map. This frees up lots of memory for iOS (where we have almost nothing left for larger domains with many users). We should ideally do this in wireguard-go itself one day, but that'd be a pretty big change. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	5066b824a6	wgengine/magicsock: don't log about disco ping timeouts if we have a working address ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c06d2a8513	wgengine/magicsock: fix typo in comment	4 years ago
Brad Fitzpatrick	bf195cd3d8	wgengine/magicsock: reduce log verbosity of discovery messages ... Don't log heartbeat pings & pongs. Track the reason for pings and then only log the ping/pong traffic if it was for initial path discovery.	4 years ago
Brad Fitzpatrick	a6559a8924	wgengine/magicsock: run test DERP in mode where only disco packets allowed ... So we don't accidentally pass a NAT traversal test by having DERP pick up our slack when we really just wanted DERP as an OOB messaging channel.	4 years ago
Brad Fitzpatrick	10ac066013	all: fix vet warnings	4 years ago
Brad Fitzpatrick	d74c9aa95b	wgengine/magicsock: update comment, fix earlier commit ... 891898525c had a continue that meant the didCopy synchronization never ran. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c976264bd1	wgengine/magicsock: gofmt	4 years ago
Dmytro Shynkevych	f3e2b65637	wgengine/magicsock: time.Sleep -> time.After ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Dmytro Shynkevych	380ee76d00	wgengine/magicsock: make time.Sleep in runDerpReader respect cancellation. ... Before this patch, the 250ms sleep would not be interrupted by context cancellation, which would result in the goroutine sometimes lingering in tests (100ms grace period). Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Dmytro Shynkevych	891898525c	wgengine/magicsock: make receive from didCopy respect cancellation. ... Very rarely, cancellation occurs between a successful send on derpRecvCh and a call to copyBuf on the receiving side. Without this patch, this situation results in <-copyBuf blocking indefinitely. Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	a2267aae99	wgengine: only launch pingers for peers predating the discovery protocol ... Peers advertising a discovery key know how to speak the discovery protocol and do their own heartbeats to get through NATs and keep NATs open. No need for the pinger except for with legacy peers.	4 years ago
David Anderson	45578b47f3	tstest/natlab: refactor PacketHandler into a larger interface. ... The new interface lets implementors more precisely distinguish local traffic from forwarded traffic, and applies different forwarding logic within Machines for each type. This allows Machines to be packet forwarders, which didn't quite work with the implementation of Inject. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Dmytro Shynkevych	2f15894a10	wgengine/magicsock: wait for derphttp client goroutine to exit ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
David Anderson	88e8456e9b	wgengine/magicsock: add a connectivity test for facing firewalls. ... The test demonstrates that magicsock can traverse two stateful firewalls facing each other, that each require localhost to initiate connections. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	1f7b1a4c6c	wgengine/magicsock: rearrange TwoDevicePing test for future natlab tests. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	977381f9cc	wgengine/magicsock: make trivial natlab test pass. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	6c74065053	wgengine/magicsock, tstest/natlab: start hooking up natlab to magicsock ... Also adds ephemeral port support to natlab. Work in progress. Pairing with @danderson.	4 years ago
Brad Fitzpatrick	bd59bba8e6	wgengine/magicsock: stop discoEndpoint timers on Close ... And add some defensive early returns on c.closed.	4 years ago
Brad Fitzpatrick	de875a4d87	wgengine/magicsock: remove DisableSTUNForTesting	4 years ago
Brad Fitzpatrick	5c6d8e3053	netcheck, tailcfg, interfaces, magicsock: survey UPnP, NAT-PMP, PCP ... Don't do anything with UPnP, NAT-PMP, PCP yet, but see how common they are in the wild. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	6196b7e658	wgengine/magicsock: change API to not permit disco key changes ... Generate the disco key ourselves and give out the public half instead. Fixes #525	4 years ago
Brad Fitzpatrick	5132edacf7	wgengine/magicsock: fix data race from undocumented wireguard-go requirement ... Endpoints need to be Stringers apparently. Fixes tailscale/corp#422	4 years ago
Brad Fitzpatrick	630379a1d0	cmd/tailscale: add tailscale status region name, last write, consistently star ... There's a lot of confusion around what tailscale status shows, so make it better: show region names, last write time, and put stars around DERP too if active. Now stars are always present if activity, and always somewhere.	4 years ago
Brad Fitzpatrick	9a8700b02a	wgengine/magicsock: add discoEndpoint heartbeat ... Updates #483	4 years ago
Brad Fitzpatrick	9f930ef2bf	wgengine/magicsock: remove the discoEndpoint.timers map ... It ended up being more complicated than it was worth.	4 years ago
Brad Fitzpatrick	f5f3885b5b	wgengine/magicsock: bunch of misc discovery path cleanups ... * fix tailscale status for peers using discovery * as part of that, pull out disco address selection into reusable and testable discoEndpoint.addrForSendLocked * truncate ping/pong logged hex txids in half to eliminate noise * move a bunch of random time constants into named constants with docs * track a history of per-endpoint pong replies for future use & status display * add "send" and " got" prefix to discovery message logging immediately before the frame type so it's easier to read than searching for the "<-" or "->" arrows earlier in the line; but keep those as the more reasily machine readable part for later. Updates #483	4 years ago
Brad Fitzpatrick	6c70cf7222	wgengine/magicsock: stop ping timeout timer on pong receipt, misc log cleanup ... Updates #483	4 years ago
Brad Fitzpatrick	c52905abaa	wgengine/magicsock: log less on no-op disco route switches ... Also, renew trustBestAddrUntil even if latency isn't better.	4 years ago
Brad Fitzpatrick	0f0ed3dca0	wgengine/magicsock: clean up discovery logging ... Updates #483	4 years ago
Brad Fitzpatrick	056fbee4ef	wgengine/magicsock: add TS_DEBUG_OMIT_LOCAL_ADDRS knob to force STUN use only ... For debugging.	4 years ago
Brad Fitzpatrick	e03cc2ef57	wgengine/magicsock: populate discoOfAddr upon receiving ping frames ... Updates #483	4 years ago
Brad Fitzpatrick	275a20f817	wgengine/magicsock: keep discoOfAddr populated, use it for findEndpoint ... Update the mapping from ip:port to discokey, so when we retrieve a packet from the network, we can find the same conn.Endpoint that we gave to wireguard-go previously, without making it think we've roamed. (We did, but we're not using its roaming.) Updates #483	4 years ago
Brad Fitzpatrick	77e89c4a72	wgengine/magicsock: handle CallMeMaybe discovery mesages ... Roughly feature complete now. Testing and polish remains. Updates #483	4 years ago
Brad Fitzpatrick	710ee88e94	wgengine/magicsock: add timeout on discovery pings, clean up state ... Updates #483	4 years ago
Brad Fitzpatrick	77d3ef36f4	wgengine/magicsock: hook up discovery messages, upgrade to LAN works ... Ping messages now go out somewhat regularly, pong replies are sent, and pong replies are now partially handled enough to upgrade off DERP to LAN. CallMeMaybe packets are sent & received over DERP, but aren't yet handled. That's next (and regular maintenance timers), and then WAN should work. Updates #483	4 years ago
Brad Fitzpatrick	9b8ca219a1	wgengine/magicsock: remove allocs in UDP write, use new netaddr.PutUDPAddr ... The allocs were only introduced yesterday with a TODO. Now they're gone again.	4 years ago
Brad Fitzpatrick	7b3c0bb7f6	wgengine/magicsock: fix crash reading DERP packet ... Starting at yesterday's e96f22e560 (convering some UDPAddrs to IPPorts), Conn.ReceiveIPv4 could return a nil addr, which would make its way through wireguard-go and blow up later. The DERP read path wasn't initializing the addr result parameter any more, and wgRecvAddr wasn't checking it either. Fixes #515	4 years ago
Brad Fitzpatrick	47b4a19786	wgengine/magicsock: use netaddr.ParseIPPort instead of net.ResolveUDPAddr	4 years ago
Brad Fitzpatrick	f7124c7f06	wgengine/magicsock: start of discoEndpoint state tracking ... Updates #483	4 years ago
Brad Fitzpatrick	92252b0988	wgengine/magicsock: add a little LRU cache for netaddr.IPPort lookups ... And while plumbing, a bit of discovery work I'll need: the endpointOfAddr map to map from validated paths to the discoEndpoint. Not being populated yet. Updates #483	4 years ago
Brad Fitzpatrick	2d6e84e19e	net/netcheck, wgengine/magicsock: replace more UDPAddr with netaddr.IPPort	4 years ago
Brad Fitzpatrick	9070aacdee	wgengine/magicsock: minor comments & logging & TODO changes	4 years ago
Brad Fitzpatrick	e96f22e560	wgengine/magicsock: start handling disco message, use netaddr.IPPort more ... Updates #483	4 years ago
Brad Fitzpatrick	a83ca9e734	wgengine/magicsock: cache precomputed nacl/box shared keys ... Updates #483	4 years ago
Brad Fitzpatrick	a975e86bb8	wgengine/magicsock: add new endpoint type used for discovery-supporting peers ... This adds a new magicsock endpoint type only used when both sides support discovery (that is, are advertising a discovery key). Otherwise the old code is used. So far the new code only communicates over DERP as proof that the new code paths are wired up. None of the actually discovery messaging is implemented yet. Support for discovery (generating and advertising a key) are still behind an environment variable for now. Updates #483	4 years ago
Brad Fitzpatrick	103c06cc68	wgengine/magicsock: open discovery naclbox messages from known peers ... And track known peers. Doesn't yet do anything with the messages. (nor does it send any yet) Start of docs on the message format. More will come in subsequent changes. Updates #483	4 years ago
Brad Fitzpatrick	23e74a0f7a	wgengine, magicsock, tstun: don't regularly STUN when idle (mobile only for now) ... If there's been 5 minutes of inactivity, stop doing STUN lookups. That means NAT mappings will expire, but they can resume later when there's activity again. We'll do this for all platforms later. Updates tailscale/corp#320 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	fe50cd0c48	ipn, wgengine: plumb NetworkMap down to magicsock ... Now we can have magicsock make decisions based on tailcfg.Debug settings sent by the server. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Dmytro Shynkevych	de5f6d70a8	magicsock: eliminate logging race in test ... Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	4 years ago
Brad Fitzpatrick	53fb25fc2f	all: generate discovery key, plumb it around ... Not actually used yet. Updates #483	4 years ago
Brad Fitzpatrick	abd79ea368	derp: reduce DERP memory use; don't require callers to pass in memory to use ... The magicsock derpReader was holding onto 65KB for each DERP connection forever, just in case. Make the derp{,http}.Client be in charge of memory instead. It can reuse its bufio.Reader buffer space.	5 years ago
Brad Fitzpatrick	280e8884dd	wgengine/magicsock: limit redundant log spam on packets from low-pri addresses ... Fixes #407 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	9e5d79e2f1	wgengine/magicsock: drop a bytes.Buffer sync.Pool, use logger.ArgWriter instead	5 years ago
Brad Fitzpatrick	becce82246	net/netns, misc tests: remove TestOnlySkipPrivilegedOps, argv checks ... The netns UID check is sufficient for now. We can do something else later if/when needed.	5 years ago
David Anderson	5114df415e	net/netns: set the bypass socket mark on linux. ... This allows tailscaled's own traffic to bypass Tailscale-managed routes, so that things like tailscale-provided default routes don't break tailscaled itself. Progress on #144. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	db2a216561	wgengine/magicsock: don't log on UDP send errors if address family known missing ... Fixes #376	5 years ago
Brad Fitzpatrick	9e3ad4f79f	net/netns: add package for start of network namespace support ... And plumb in netcheck STUN packets. TODO: derphttp, logs, control. Updates #144 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	a428656280	wgengine/magicsock: don't report v4 localhost addresses on IPv6-only systems ... Updates #376	5 years ago
Avery Pennarun	30e5c19214	magicsock: work around race condition initializing .Regions[]. ... Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Brad Fitzpatrick	b0c10fa610	stun, netcheck: move under net	5 years ago
Brad Fitzpatrick	e6b84f2159	all: make client use server-provided DERP map, add DERP region support ... Instead of hard-coding the DERP map (except for cmd/tailscale netcheck for now), get it from the control server at runtime. And make the DERP map support multiple nodes per region with clients picking the first one that's available. (The server will balance the order presented to clients for load balancing) This deletes the stunner package, merging it into the netcheck package instead, to minimize all the config hooks that would've been required. Also fix some test flakes & races. Fixes #387 (Don't hard-code the DERP map) Updates #388 (Add DERP region support) Fixes #399 (wgengine: flaky tests) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	e8b3a5e7a1	wgengine/filter: implement a destination IP pre-filter. ... Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	e6d0c92b1d	wgengine/magicsock: clean up earlier fix a bit ... Move WaitReady from fc88e34f42 into the test code, and keep the derp-reading goroutine named for debugging.	5 years ago
Avery Pennarun	fc88e34f42	wgengine/magicsock/tests: wait for home DERP connection before sending packets. ... This fixes an elusive test flake. Fixes #161. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	4f128745d8	magicsock/test: oops, fix a data race in nested-test logf hack. ... Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	42a0e0c601	wgengine/magicsock/tests: call tstest.ResourceCheck for each test. ... This didn't catch anything yet, but it's good practice for detecting goroutine leaks that we might not find otherwise. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	08acb502e5	Add tstest.PanicOnLog(), and fix various problems detected by this. ... If a test calls log.Printf, 'go test' horrifyingly rearranges the output to no longer be in chronological order, which makes debugging virtually impossible. Let's stop that from happening by making log.Printf panic if called from any module, no matter how deep, during tests. This required us to change the default error handler in at least one http.Server, as well as plumbing a bunch of logf functions around, especially in magicsock and wgengine, but also in logtail and backoff. To add insult to injury, 'go test' also rearranges the output when a parent test has multiple sub-tests (all the sub-test's t.Logf is always printed after all the parent tests t.Logf), so we need to screw around with a special Logf that can point at the "current" t (current_t.Logf) in some places. Probably our entire way of using subtests is wrong, since 'go test' would probably like to run them all in parallel if you called t.Parallel(), but it definitely can't because the're all manipulating the shared state created by the parent test. They should probably all be separate toplevel tests instead, with common setup/teardown logic. But that's a job for another time. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Dmytro Shynkevych	33b2f30cea	wgengine: wrap tun.Device to support filtering and packet injection (#358) ... Right now, filtering and packet injection in wgengine depend on a patch to wireguard-go that probably isn't suitable for upstreaming. This need not be the case: wireguard-go/tun.Device is an interface. For example, faketun.go implements it to mock a TUN device for testing. This patch implements the same interface to provide filtering and packet injection at the tunnel device level, at which point the wireguard-go patch should no longer be necessary. This patch has the following performance impact on i7-7500U @ 2.70GHz, tested in the following namespace configuration: ┌────────────────┐ ┌─────────────────────────────────┐ ┌────────────────┐ │ $ns1 │ │ $ns0 │ │ $ns2 │ │ client0 │ │ tailcontrol, logcatcher │ │ client1 │ │ ┌─────┐ │ │ ┌──────┐ ┌──────┐ │ │ ┌─────┐ │ │ │vethc│───────┼────┼──│vethrc│ │vethrs│──────┼─────┼──│veths│ │ │ ├─────┴─────┐ │ │ ├──────┴────┐ ├──────┴────┐ │ │ ├─────┴─────┐ │ │ │10.0.0.2/24│ │ │ │10.0.0.1/24│ │10.0.1.1/24│ │ │ │10.0.1.2/24│ │ │ └───────────┘ │ │ └───────────┘ └───────────┘ │ │ └───────────┘ │ └────────────────┘ └─────────────────────────────────┘ └────────────────┘ Before: --------------------------------------------------- | TCP send | UDP send | |------------------------|------------------------| | 557.0 (±8.5) Mbits/sec | 3.03 (±0.02) Gbits/sec | --------------------------------------------------- After: --------------------------------------------------- | TCP send | UDP send | |------------------------|------------------------| | 544.8 (±1.6) Mbits/sec | 3.13 (±0.02) Gbits/sec | --------------------------------------------------- The impact on receive performance is similar. Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
Brad Fitzpatrick	fefd7e10dc	types/structs: add structs.Incomparable annotation, use it where applicable ... Shotizam before and output queries: sqlite> select sum(size) from bin where func like 'type..%'; 129067 => 120216	5 years ago
Brad Fitzpatrick	e1526b796e	ipn: don't listen on the unspecified address in test ... To avoid the Mac firewall dialog of (test) death. See 4521a59f30 which I added to help debug this.	5 years ago
Brad Fitzpatrick	18017f7630	ipn, wgengine/magicsock: be more idle when in Stopped state with no peers ... (Previously as #288, but with some more.) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	9669b85b41	wgengine/magicsock: wait for endpoint updater goroutine when closing. ... Fixes #204. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	268d331cb5	wgengine/magicsock: prune key.Public-keyed on peer removals ... Fixes #215	5 years ago
Brad Fitzpatrick	00d053e25a	wgengine/magicsock: fix slow memory leak as peer endpoints move around ... Updates #215	5 years ago
Brad Fitzpatrick	7fc97c5493	wgengine/magicsock: use netaddr more ... In prep for deleting from the ever-growing maps.	5 years ago
Brad Fitzpatrick	6fb30ff543	wgengine/magicsock: start using inet.af/netaddr a bit	5 years ago
Brad Fitzpatrick	a7e7c7b548	wgengine/magicsock: close derp connections on rebind ... Fixes #276 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	614261d00d	wgengine/magicsock: reset AddrSet states on Rebind ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Blake Gentry	e19287f60f	wgengine/magicsock: fix Conn docs type reference ... The docs on magicsock.Conn stated that they implemented the wireguard/device.Bind interface, yet this type does not exist. In reality, the Conn type implements the wireguard/conn.Bind interface. I also fixed a small typo in the same file. Signed-off-by: Blake Gentry <blakesgentry@gmail.com>	5 years ago
Brad Fitzpatrick	322499473e	cmd/tailscaled, wgengine, ipn: add /debug/ipn handler with world state ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	2d48f92a82	wgengine/magicsock: re-stun every [20,27] sec, not 28 ... 28 is cutting it close, and we think jitter will help some spikes we're seeing. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	577f321c38	wgengine/magicsock: revise derp fallback logic ... Revision to earlier 6284454ae5 Don't be sticky if we have no peers. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	6284454ae5	wgengine/magicsock: if UDP blocked, pick DERP where most peers are ... Updates #207 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	d321190578	wgengine/magicsock: stringify [IPv6]:port normally in AddrSet.String	5 years ago
Brad Fitzpatrick	3c3ea8bc8a	wgengine/magicsock: finish IPv6 transport support ... DEBUG_INCLUDE_IPV6=1 is still required, but works now. Updates #18 (fixes it, once env var gate is removed)	5 years ago
Brad Fitzpatrick	82ed7e527e	wgengine/magicsock: remove log allocation ... This was the whole point but I goofed at the last line.	5 years ago
Brad Fitzpatrick	8454bbbda5	wgengine/magicsock: more logging improvements ... * remove endpoint discovery noise when results unchanged * consistently spell derp nodes as "derp-N" * replace "127.3.3.40:" with "derp-" in CreateEndpoint log output * stop early DERP setup before SetPrivateKey is called; it just generates log nosie * fix stringification of peer ShortStrings (it had an old %x on it, rendering it garbage) * describe why derp routes are changing, with one of: shared home, their home, our home, alt	5 years ago
Brad Fitzpatrick	680311b3df	wgengine/magicsock: fix few remaining logs without package prefix	5 years ago
Brad Fitzpatrick	c473927558	wgengine/magicsock: clean up, add, improve DERP logs	5 years ago
Brad Fitzpatrick	ea9310403d	wgengine/magicsock: re-STUN on DERP connection death ... Fixes #201	5 years ago
Brad Fitzpatrick	1ab5b31c4b	derp, magicsock: send new "peer gone" frames when previous sender disconnects ... Updates #150 (not yet enabled by default in magicsock) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	b6f77cc48d	wgengine/magicsock: return early, outdent in derpWriteChanOfAddr	5 years ago
Brad Fitzpatrick	dd31285ad4	wgengine/magicsock: send IPv6 using pconn6, if available ... In prep for IPv6 support. Nothing should make it this far yet.	5 years ago
Brad Fitzpatrick	af277a6762	controlclient, magicsock: add debug knob to request IPv6 endpoints ... Add opt-in method to request IPv6 endpoints from the control plane. For now they should just be skipped. A previous version of this CL was unconditional and reportedly had problems that I can't reproduce. So make it a knob until the mystery is solved. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	221e7d7767	wgengine/magicsock: make log message include DERP port (node)	5 years ago
Brad Fitzpatrick	33bdcabf03	wgengine/magicsock: call stun callback w/ only valid part of STUN packet	5 years ago
David Anderson	0be475ba46	Revert "tailcfg, controlclient, magicsock: request IPv6 endpoints, but ignore them" ... Breaks something deep in wireguard or magicsock's brainstem, no packets at all can flow. All received packets fail decryption with "invalid mac1". This reverts commit 94024355ed. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	94024355ed	tailcfg, controlclient, magicsock: request IPv6 endpoints, but ignore them ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	60ea635c6d	wgengine/magicsock: delete inaccurate comment ... I meant to include this in the earlier commit.	5 years ago
Brad Fitzpatrick	a184e05290	wgengine/magicsock: listen on udp6, use it for STUN, report endpoint ... More steps towards IPv6 transport. We now send it to tailcontrol, which ignores it. But it doesn't actually actually support IPv6 yet (outside of STUN). Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	7caa288213	wgengine/magicsock: rename pconn field to pconn4, in prep for pconn6	5 years ago