tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	e6b84f2159	all: make client use server-provided DERP map, add DERP region support Instead of hard-coding the DERP map (except for cmd/tailscale netcheck for now), get it from the control server at runtime. And make the DERP map support multiple nodes per region with clients picking the first one that's available. (The server will balance the order presented to clients for load balancing) This deletes the stunner package, merging it into the netcheck package instead, to minimize all the config hooks that would've been required. Also fix some test flakes & races. Fixes #387 (Don't hard-code the DERP map) Updates #388 (Add DERP region support) Fixes #399 (wgengine: flaky tests) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	e8b3a5e7a1	wgengine/filter: implement a destination IP pre-filter. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	7fb33123d3	wgengine/router: warn about another variation of busybox's `ip`. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Dmytro Shynkevych	635f7b99f1	wgengine: pass tun.NativeDevice to router Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
David Anderson	9c914dc7dd	wgengine/router: stop using -m comment. The comment module is compiled out on several embedded systems (and also gentoo, because netfilter can't go brrrr with comments holding it back). Attempting to use comments results in a confusing error, and a non-functional firewall. Additionally, make the legacy rule cleanup non-fatal, because we do have to probe for the existence of these -m comment rules, and doing so will error out on these systems. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	3e27b3c33c	wgengine/router: more comments. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	0fe262f093	ipn: plumb NetfilterMode all the way out to the CLI. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	c67c8913c3	wgengine/router: add a test for linux router state transitions. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	292606a975	wgengine/router: support multiple levels of netfilter involvement. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	e6d0c92b1d	wgengine/magicsock: clean up earlier fix a bit Move WaitReady from `fc88e34f42` into the test code, and keep the derp-reading goroutine named for debugging.	5 years ago
Avery Pennarun	d53e8fc0da	router_darwin_support: we can build this on every platform. Our new build scripts try to build ipn-go-bridge on more than just linux and darwin, so let's enable this file so it can be successful on every platform.	5 years ago
Avery Pennarun	fc88e34f42	wgengine/magicsock/tests: wait for home DERP connection before sending packets. This fixes an elusive test flake. Fixes #161. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	4f128745d8	magicsock/test: oops, fix a data race in nested-test logf hack. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	42a0e0c601	wgengine/magicsock/tests: call tstest.ResourceCheck for each test. This didn't catch anything yet, but it's good practice for detecting goroutine leaks that we might not find otherwise. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	08acb502e5	Add tstest.PanicOnLog(), and fix various problems detected by this. If a test calls log.Printf, 'go test' horrifyingly rearranges the output to no longer be in chronological order, which makes debugging virtually impossible. Let's stop that from happening by making log.Printf panic if called from any module, no matter how deep, during tests. This required us to change the default error handler in at least one http.Server, as well as plumbing a bunch of logf functions around, especially in magicsock and wgengine, but also in logtail and backoff. To add insult to injury, 'go test' also rearranges the output when a parent test has multiple sub-tests (all the sub-test's t.Logf is always printed after all the parent tests t.Logf), so we need to screw around with a special Logf that can point at the "current" t (current_t.Logf) in some places. Probably our entire way of using subtests is wrong, since 'go test' would probably like to run them all in parallel if you called t.Parallel(), but it definitely can't because the're all manipulating the shared state created by the parent test. They should probably all be separate toplevel tests instead, with common setup/teardown logic. But that's a job for another time. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Dmytro Shynkevych	33b2f30cea	wgengine: wrap tun.Device to support filtering and packet injection (#358 ) Right now, filtering and packet injection in wgengine depend on a patch to wireguard-go that probably isn't suitable for upstreaming. This need not be the case: wireguard-go/tun.Device is an interface. For example, faketun.go implements it to mock a TUN device for testing. This patch implements the same interface to provide filtering and packet injection at the tunnel device level, at which point the wireguard-go patch should no longer be necessary. This patch has the following performance impact on i7-7500U @ 2.70GHz, tested in the following namespace configuration: ┌────────────────┐ ┌─────────────────────────────────┐ ┌────────────────┐ │ $ns1 │ │ $ns0 │ │ $ns2 │ │ client0 │ │ tailcontrol, logcatcher │ │ client1 │ │ ┌─────┐ │ │ ┌──────┐ ┌──────┐ │ │ ┌─────┐ │ │ │vethc│───────┼────┼──│vethrc│ │vethrs│──────┼─────┼──│veths│ │ │ ├─────┴─────┐ │ │ ├──────┴────┐ ├──────┴────┐ │ │ ├─────┴─────┐ │ │ │10.0.0.2/24│ │ │ │10.0.0.1/24│ │10.0.1.1/24│ │ │ │10.0.1.2/24│ │ │ └───────────┘ │ │ └───────────┘ └───────────┘ │ │ └───────────┘ │ └────────────────┘ └─────────────────────────────────┘ └────────────────┘ Before: --------------------------------------------------- \| TCP send \| UDP send \| \|------------------------\|------------------------\| \| 557.0 (±8.5) Mbits/sec \| 3.03 (±0.02) Gbits/sec \| --------------------------------------------------- After: --------------------------------------------------- \| TCP send \| UDP send \| \|------------------------\|------------------------\| \| 544.8 (±1.6) Mbits/sec \| 3.13 (±0.02) Gbits/sec \| --------------------------------------------------- The impact on receive performance is similar. Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
David Anderson	9ccbcda612	wgengine/router: rename config.Settings to config.Config, make pointer. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	72cae5504c	wgengine: generate and plumb router.Settings in from ipn. This saves a layer of translation, and saves us having to pass in extra bits and pieces of the netmap and prefs to wgengine. Now it gets one Wireguard config, and one OS network stack config. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	cd01bcc395	wgengine/router: allow loopback traffic from our own IP(s). Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	bfdc8175b1	wgengine/router: add a setting to disable SNAT for subnet routes. Part of #320. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	8a3e77fc43	ipn, wgengine/filter: remove exported type aliases	5 years ago
David Anderson	21ac65d3da	wgengine/router: explicitly detect and complain about busybox's `ip`. Defensive programming against #368 in environments other than Docker, e.g. if you try using Tailscale in Alpine Linux directly, sans container. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	381b94d4d1	wgengine/router: include command output if `ip rule list` fails. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	e83d02ffd1	wgengine: don't double-close tundev on setup error. Part of #368. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	efc1feedc9	wgengine/router: include more information when iptables ops fail. The iptables package we use doesn't include command output, so we're left with guessing what went wrong most of the time. This will at least narrow things down to which operation failed. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	e16f7e48a3	wgengine: simplify wgcfg.* to netaddr.* conversion. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	ccbd0937d0	wgengine: avoid v6 mapped v4 IPs when converting to netaddr types. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Wendi Yu	499c8fcbb3	Replace our ratelimiter with standard rate package (#359 ) * Replace our ratelimiter with standard rate package Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>	5 years ago
David Anderson	b01db109f5	wgengine/router: use inet.af/netaddr, not wgcfg.CIDR. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	b8f01eed34	wgengine/router: remove wireguard-go config from settings. Instead, pass in only exactly the relevant configuration pieces that the OS network stack cares about. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	8861bb5a19	wgengine/router: alter API to support multiple addrs, and use on linux. FreeBSD and OpenBSD will error out with a complaint if we pass >1 address right now, but we don't yet so that's okay.	5 years ago
David Anderson	6802481bf5	wgengine/router: don't use gateway routes on linux.	5 years ago
David Anderson	78b1ed39ea	wgengine/router: add more documentation.	5 years ago
David Anderson	c9de43cd59	wgengine/router: fix typo. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	89af51b84d	wgengine: plumb locally advertised subnet routes. With this change, advertising subnet routes configures the firewall correctly. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	89198b1691	wgengine/router: rewrite netfilter and routing logic. New logic installs precise filters for subnet routes, plays nice with other users of netfilter, and lays the groundwork for fixing routing loops via policy routing. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	7618d7e677	wgengine/router: simplify some cmd invocations. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	fefd7e10dc	types/structs: add structs.Incomparable annotation, use it where applicable Shotizam before and output queries: sqlite> select sum(size) from bin where func like 'type..%'; 129067 => 120216	5 years ago
David Anderson	755fd9253c	wgengine/router: fix up docstring. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	1ac570def7	wgengine/router: split out from wgengine. The router implementations are logically separate, with their own API. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Avery Pennarun	ee3395e63a	wgengine/filter: fix linter warning. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	65fbb9c303	wgengine/filter: support subnet mask rules, not just /32 IPs. This depends on improved support from the control server, to send the new subnet width (Bits) fields. If these are missing, we fall back to assuming their value is /32. Conversely, if the server sends Bits fields to an older client, it will interpret them as /32 addresses. Since the only rules we allow are "accept" rules, this will be narrower or equal to the intended rule, so older clients will simply reject hosts on the wider subnet (fail closed). With this change, the internal filter.Matches format has diverged from the wire format used by controlclient, so move the wire format into tailcfg and convert it to filter.Matches in controlclient. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	85e675940d	wgengine/filter: allow ICMP response packets. Longer term, we should probably update the packet filter to be fully stateful, for both TCP and ICMP. That is, only ICMP packets related to a session we initiated should be allowed back in. But this is reasonably secure for now, since wireguard is already trimming most traffic. The current code would not protect against eg. Ping-of-Death style attacks from VPN nodes. Fixes tailscale/tailscale#290. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Brad Fitzpatrick	e1526b796e	ipn: don't listen on the unspecified address in test To avoid the Mac firewall dialog of (test) death. See `4521a59f30` which I added to help debug this.	5 years ago
Brad Fitzpatrick	18017f7630	ipn, wgengine/magicsock: be more idle when in Stopped state with no peers (Previously as #288, but with some more.) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
fgergo	8296c934ac	Update ifconfig_windows.go OLE calls sometimes unexpectedly fail, but retries can succeed. Change panic() to return errors. This way ConfigureInterface() retries can succeed.	5 years ago
David Anderson	9669b85b41	wgengine/magicsock: wait for endpoint updater goroutine when closing. Fixes #204. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Elias Naur	2dac4f2b24	wgengine/monitor: disable monitor on Android Netlink is not supported on Android. Signed-off-by: Elias Naur <mail@eliasnaur.com>	5 years ago
Brad Fitzpatrick	268d331cb5	wgengine/magicsock: prune key.Public-keyed on peer removals Fixes #215	5 years ago
Brad Fitzpatrick	00d053e25a	wgengine/magicsock: fix slow memory leak as peer endpoints move around Updates #215	5 years ago

1 2 3 4 5

215 Commits (e6b84f2159bae0c8e26d093048cf313045039229)