tailscale

Commit Graph

Author	SHA1	Message	Date
Nick Khyl	7ef1fb113d	cmd/tailscaled, ipn/ipnlocal, wgengine: shutdown tailscaled if wgdevice is closed Tailscaled becomes inoperative if the Tailscale Tunnel wintun adapter is abruptly removed. wireguard-go closes the device in case of a read error, but tailscaled keeps running. This adds detection of a closed WireGuard device, triggering a graceful shutdown of tailscaled. It is then restarted by the tailscaled watchdog service process. Fixes #11222 Signed-off-by: Nick Khyl <nickk@tailscale.com>	8 months ago
Percy Wegmann	50fb8b9123	tailfs: replace webdavfs with reverse proxies Instead of modeling remote WebDAV servers as actual webdav.FS instances, we now just proxy traffic to them. This not only simplifies the code, but it also allows WebDAV locking to work correctly by making sure locks are handled by the servers that need to (i.e. the ones actually serving the files). Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	8 months ago
Brad Fitzpatrick	e1bd7488d0	all: remove LenIter, use Go 1.22 range-over-int instead Updates #11058 Updates golang/go#65685 Change-Id: Ibb216b346e511d486271ab3d84e4546c521e4e22 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
James Tucker	0c5e65eb3f	cmd/derper: apply TCP keepalive and timeout to TLS as well I missed a case in the earlier patch, and so we're still sending 15s TCP keepalive for TLS connections, now adjusted there too. Updates tailscale/corp#17587 Updates #3363 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Andrea Gottardo	c8c999d7a9	cli/debug: rename DERP debug mode (#11220 ) Renames a debug flag in the CLI. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	9 months ago
Percy Wegmann	15b2c674bf	cmd/tailscale: add node attribute instructions to share command help This adds details on how to configure node attributes to allow sharing and accessing shares. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
James Tucker	edbad6d274	cmd/derper: add user timeout and reduce TCP keepalive The derper sends an in-protocol keepalive every 60-65s, so frequent TCP keepalives are unnecessary. In this tuning TCP keepalives should never occur for a DERP client connection, as they will send an L7 keepalive often enough to always reset the TCP keepalive timer. If however a connection does not receive an ACK promptly it will now be shutdown, which happens sooner than it would with a normal TCP keepalive tuning. This re-tuning reduces the frequency of network traffic from derp to client, reducing battery cost. Updates tailscale/corp#17587 Updates #3363 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Brad Fitzpatrick	10d130b845	cmd/derper, derp, tailcfg: add admission controller URL option So derpers can check an external URL for whether to permit access to a certain public key. Updates tailscale/corp#17693 Change-Id: I8594de58f54a08be3e2dbef8bcd1ff9b728ab297 Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Paul Scott	7708ab68c0	cmd/tailscale/cli: pass "-o 'CanonicalizeHostname no'" to ssh Fixes #10348 Signed-off-by: Paul Scott <paul@tailscale.com>	9 months ago
Percy Wegmann	91a1019ee2	cmd/testwrapper: apply results of all unit tests to coverage for all packages This allows coverage from tests that hit multiple packages at once to be reflected in all those packages' coverage. Updates #cleanup Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Will Norris	6b582cb8b6	cmd/tailscale: support clickable IPv6 web client addresses Instead of constructing the `ip:port` string ourselves, use netip.AddrPortFrom which handles IPv6 correctly. Updates #11164 Signed-off-by: Will Norris <will@tailscale.com>	9 months ago
Will Norris	24487815e1	cmd/tailscale: make web client URL clickable Updates #11151 Signed-off-by: Will Norris <will@tailscale.com>	9 months ago
Andrew Dunham	52f16b5d10	doctor/ethtool, ipn/ipnlocal: add ethtool bugreport check Updates #11137 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Idbe862d80e428adb044249c47d9096b87f29d5d8	9 months ago
Brad Fitzpatrick	61a1644c2a	go.mod, all: move away from inet.af domain seized by Taliban Updates inetaf/tcpproxy#39 Change-Id: I7fee276b116bd08397347c6c949011d76a2842cf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Irbe Krumina	5bd19fd3e3	cmd/k8s-operator,k8s-operator: proxy configuration mechanism via a new ProxyClass custom resource (#11074 ) * cmd/k8s-operator,k8s-operator: introduce proxy configuration mechanism via ProxyClass custom resource. ProxyClass custom resource can be used to specify customizations for the proxy resources created by the operator. Add a reconciler that validates ProxyClass resources and sets a Ready condition to True or False with a corresponding reason and message. This is required because some fields (labels and annotations) require complex validations that cannot be performed at custom resource apply time. Reconcilers that use the ProxyClass to configure proxy resources are expected to verify that the ProxyClass is Ready and not proceed with resource creation if configuration from a ProxyClass that is not yet Ready is required. If a tailscale ingress/egress Service is annotated with a tailscale.com/proxy-class annotation, look up the corresponding ProxyClass and, if it is Ready, apply the configuration from the ProxyClass to the proxy's StatefulSet. If a tailscale Ingress has a tailscale.com/proxy-class annotation and the referenced ProxyClass custom resource is available and Ready, apply configuration from the ProxyClass to the proxy resources that will be created for the Ingress. Add a new .proxyClass field to the Connector spec. If connector.spec.proxyClass is set to a ProxyClass that is available and Ready, apply configuration from the ProxyClass to the proxy resources created for the Connector. Ensure that when Helm chart is packaged, the ProxyClass yaml is added to chart templates. Ensure that static manifest generator adds ProxyClass yaml to operator.yaml. Regenerate operator.yaml Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Percy Wegmann	d0ef3a25df	cmd/tailscale: hide share subcommand Fixes #1115 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Percy Wegmann	55b372a79f	tailscaled: revert to using pointers for subcommands As part of #10631, we stopped using function pointers for subcommands, preventing us from registering platform-specific installSystemDaemon and uninstallSystemDaemon subcommands. Fixes #11099 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Percy Wegmann	87154a2f88	tailfs: fix startup issues on windows Starts TailFS for Windows too, initializes shares on startup. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Percy Wegmann	abab0d4197	tailfs: clean up naming and package structure - Restyles tailfs -> tailFS - Defines interfaces for main TailFS types - Moves implemenatation of TailFS into tailfsimpl package Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
James Tucker	24bac27632	util/rands: add Shuffle and Perm functions with on-stack RNG state The new math/rand/v2 package includes an m-local global random number generator that can not be reseeded by the user, which is suitable for most uses without the RNG pools we have in a number of areas of the code base. The new API still does not have an allocation-free way of performing a seeded operations, due to the long term compiler bug around interface parameter escapes, and the Source interface. This change introduces the two APIs that math/rand/v2 can not yet replace efficiently: seeded Perm() and Shuffle() operations. This implementation chooses to use the PCG random source from math/rand/v2, as with sufficient compiler optimization, this source should boil down to only two on-stack registers for random state under ideal conditions. Updates #17243 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Jenny Zhang	c446451bfa	cmd/gitops-pusher: only use OAuth creds if non-empty string `os.LookupEnv` may return true if the variable is present in the environment but an empty string. We should only attempt to set OAuth Config if thsoe values are non-empty. Updates gitops-acl-action#33 Signed-off-by: Jenny Zhang <jz@tailscale.com>	9 months ago
Percy Wegmann	993acf4475	tailfs: initial implementation Add a WebDAV-based folder sharing mechanism that is exposed to local clients at 100.100.100.100:8080 and to remote peers via a new peerapi endpoint at /v0/tailfs. Add the ability to manage folder sharing via the new 'share' CLI sub-command. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Joe Tsai	94a4f701c2	all: use reflect.TypeFor now available in Go 1.22 (#11078 ) Updates #cleanup Signed-off-by: Joe Tsai <joetsai@digital-static.net>	9 months ago
Charlotte Brandhorst-Satzkorn	0f042b9814	cmd/tailscale/cli: fix exit node status output (#11076 ) This change fixes the format of tailscale status output when location based exit nodes are present. Fixes #11065 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	9 months ago
Sonia Appasamy	1217f655c0	cmd/dist: update logs for synology builds Update logs for synology builds to more clearly callout which variant is being built. The two existing variants are: 1. Sideloaded (can be manual installed on a device by anyone) 2. Package center distribution (by the tailscale team) Updates #cleanup Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	9 months ago
Will Norris	128c99d4ae	client/web: add new readonly mode The new read-only mode is only accessible when running `tailscale web` by passing a new `-readonly` flag. This new mode is identical to the existing login mode with two exceptions: - the management client in tailscaled is not started (though if it is already running, it is left alone) - the client does not prompt the user to login or switch to the management client. Instead, a message is shown instructing the user to use other means to manage the device. Updates #10979 Signed-off-by: Will Norris <will@tailscale.com>	9 months ago
Irbe Krumina	a6cc2fdc3e	cmd/{containerboot,k8s-operator/deploy/manifests}: optionally allow proxying cluster traffic to a cluster target via ingress proxy (#11036 ) * cmd/containerboot,cmd/k8s-operator/deploy/manifests: optionally forward cluster traffic via ingress proxy. If a tailscale Ingress has tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation, configure the associated ingress proxy to have its tailscale serve proxy to listen on Pod's IP address. This ensures that cluster traffic too can be forwarded via this proxy to the ingress backend(s). In containerboot, if EXPERIMENTAL_PROXY_CLUSTER_TRAFFIC_VIA_INGRESS is set to true and the node is Kubernetes operator ingress proxy configured via Ingress, make sure that traffic from within the cluster can be proxied to the ingress target. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Brad Fitzpatrick	2bd3c1474b	util/cmpx: delete now that we're using Go 1.22 Updates #11058 Change-Id: I09dea8e86f03ec148b715efca339eab8b1f0f644 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Andrew Lytvynov	db3776d5bf	go.toolchain.rev: bump to Go 1.22.0 (#11055 ) Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	9 months ago
Chris Palmer	a633a30711	cmd/hello: link to the Hello KB article (#11022 ) Fixes https://github.com/tailscale/corp/issues/17104 Signed-off-by: Chris Palmer <cpalmer@tailscale.com>	9 months ago
Chris Palmer	9744ad47e3	cmd/hello: avoid deprecated apis (#10957 ) Updates #cleanup Signed-off-by: Chris Palmer <cpalmer@tailscale.com>	9 months ago
Will Norris	13f8a669d5	cmd/gitops-pusher: fix logic for checking credentials gitops-pusher supports authenticating with an API key or OAuth credentials (added in #7393). You shouldn't ever use both of those together, so we error if both are set. In tailscale/gitops-acl-action#24, OAuth support is being added to the GitHub action. In that environment, both the TS_API_KEY and OAuth variables will be set, even if they are empty values. This causes an error in gitops-pusher which expects only one to be set. Update gitops-pusher to check that only one set of environment variables are non-empty, rather than just checking if they are set. Updates #7393 Signed-off-by: Will Norris <will@tailscale.com>	9 months ago
Andrew Lytvynov	fbfc3b7e51	cmd/tailscale/cli: run Watch with NotifyNoPrivateKeys (#10950 ) When running as non-root non-operator user, you get this error: ``` $ tailscale serve 8080 Access denied: watch IPN bus access denied, must set ipn.NotifyNoPrivateKeys when not running as admin/root or operator Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root. ``` It should fail, but the error message is confusing. With this fix: ``` $ tailscale serve 8080 sending serve config: Access denied: serve config denied Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root. ``` Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	10 months ago
Irbe Krumina	370ec6b46b	cmd/k8s-operator: don't proceed with Ingress that has no valid backends (#10919 ) Do not provision resources for a tailscale Ingress that has no valid backends. Updates tailscale/tailscale#10910 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
James Tucker	7e3bcd297e	go.mod,wgengine/netstack: bump gvisor Updates #8043 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
James Tucker	457102d070	go.mod: bump most deps for start of cycle Plan9 CI is disabled. 3p dependencies do not build for the target. Contributor enthusiasm appears to have ceased again, and no usage has been made. Skipped gvisor, nfpm, and k8s. Updates #5794 Updates #8043 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
Andrew Dunham	7a0392a8a3	wgengine/netstack: expose gVisor metrics through expvar When tailscaled is run with "-debug 127.0.0.1:12345", these metrics are available at: http://localhost:12345/debug/metrics Updates #8210 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I19db6c445ac1f8344df2bc1066a3d9c9030606f8	10 months ago
ChandonPierre	2ce596ea7a	cmd/k8s-operator/deploy: allow modifying operator tags via Helm values Updates tailscale/tailscale#10659 Signed-off-by: Chandon Pierre <cpierre@coreweave.com>	10 months ago
James Tucker	8250582fe6	ipn/ipnlocal: make app connector configuration concurrent If there are routes changes as a side effect of an app connector configuration update, the connector configuration may want to reenter a lock, so must be started asynchronously. Updates tailscale/corp#16833 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
James Tucker	38a1cf748a	control/controlclient,util/execqueue: extract execqueue into a package This is a useful primitive for asynchronous execution of ordered work I want to use in another change. Updates tailscale/corp#16833 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
Joe Tsai	c25968e1c5	all: make use of ctxkey everywhere (#10846 ) Also perform minor cleanups on the ctxkey package itself. Provide guidance on when to use ctxkey.Key[T] over ctxkey.New. Also, allow for interface kinds because the value wrapping trick also happens to fix edge cases with interfaces in Go. Updates #cleanup Signed-off-by: Joe Tsai <joetsai@digital-static.net>	10 months ago
Irbe Krumina	1c3c3d6752	cmd/k8s-operator: warn if unsupported Ingress Exact path type is used. (#10865 ) To reduce the likelihood of breaking users, if we implement stricter Exact path type matching in the future. Updates tailscale/tailscale#10730 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	50b52dbd7d	cmd/k8s-operator: sync StatefulSet labels to their Pods (#10861 ) So that users have predictable label values to use when configuring network policies. Updates tailscale/tailscale#10854 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	d0492fdee5	cmd/k8s-operator: adds a tailscale IngressClass resource, prints warning if class not found. (#10823 ) * cmd/k8s-operator/deploy: deploy a Tailscale IngressClass resource. Some Ingress validating webhooks reject Ingresses with .spec.ingressClassName for which there is no matching IngressClass. Additionally, validate that the expected IngressClass is present, when parsing a tailscale `Ingress`. We currently do not utilize the IngressClass, however we might in the future at which point we might start requiring that the right class for this controller instance actually exists. Updates tailscale/tailscale#10820 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com>	10 months ago
Charlotte Brandhorst-Satzkorn	e6910974ca	cmd/tailscale/cli: add description to exit-node CLI command This change adds a description to the exit-node CLI command. This description will be displayed when using `tailscale -h` and `tailscale exit-node -h`. Fixes #10787 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	10 months ago
Irbe Krumina	169778e23b	cmd/k8s-operator: minor fix in name gen (#10830 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	5cc1bfe82d	cmd/k8s-operator: remove configuration knob for Connector (#10791 ) The configuration knob (that defaulted to Connector being disabled) was added largely because the Connector CRD had to be installed in a separate step. Now when the CRD has been added to both chart and static manifest, we can have it on by default. Updates tailscale/tailscale#10878 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	469af614b0	cmd/k8s-operator: fix base truncating for extra long Service names (#10825 ) cmd/k8s-operator: fix base truncating for extra long Service names StatefulSet names for ingress/egress proxies are calculated using Kubernetes name generator and the parent resource name as a base. The name generator also cuts the base, but has a higher max cap. This commit fixes a bug where, if we get a shortened base back from the generator, we cut off too little as the base that we have cut will be passed into the generator again, which will then itself cut less because the base is shorter- so we end up with a too long name again. Updates tailscale/tailscale#10807 Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Irbe Krumina <irbekrm@gmail.com>	10 months ago
Andrew Lytvynov	4ec6a78551	go.mod: update golang-x-crypto fork (#10786 ) Pick up a bunch of recent upstream commits. Updates #8593 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	10 months ago
Irbe Krumina	35f49ac99e	cmd/k8s-operator: add Connector CRD to Helm chart and static manifests (#10775 ) cmd/k8s-operator: add CRD to chart and static manifest Add functionality to insert CRD to chart at package time. Insert CRD to static manifests as this is where they are currently consumed from. Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Sonia Appasamy	ea9c7f991a	cli/set: add printout when web client started Prints a helpful message with the web UI's address when running tailscale set --webclient. Updates tailscale/corp#16345 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	10 months ago
Rhea Ghosh	4ce33c9758	taildrop: remove breaking abstraction layers for apple (#10728 ) Removes the avoidFinalRename logic and all associated code as it is no longer required by the Apple clients. Enables resume logic to be usable for Apple clients. Fixes tailscale/corp#14772 Signed-off-by: Rhea Ghosh <rhea@tailscale.com>	10 months ago
Andrew Dunham	20f3f706a4	net/netutil: allow 16-bit 4via6 site IDs The prefix has space for 32-bit site IDs, but the validateViaPrefix function would previously have disallowed site IDs greater than 255. Fixes tailscale/corp#16470 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I4cdb0711dafb577fae72d86c4014cf623fa538ef	10 months ago
Irbe Krumina	05093ea7d9	cmd/k8s-operator,k8s-operator: allow the operator to deploy exit nodes via Connector custom resource (#10724 ) cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR. Make it possible to define an exit node to be deployed to a Kubernetes cluster via Connector Custom resource. Also changes to Connector API so that one Connector corresponds to one Tailnet node that can be either a subnet router or an exit node or both. The Kubernetes operator parses Connector custom resource and, if .spec.isExitNode is set, configures that Tailscale node deployed for that connector as an exit node. Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com>	10 months ago
James Tucker	953fa80c6f	cmd/{derper,stund},net/stunserver: add standalone stun server Add a standalone server for STUN that can be hosted independently of the derper, and factor that back into the derper. Fixes #8434 Closes #8435 Closes #10745 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
Irbe Krumina	133699284e	cmd/containerboot: add EXPERIMENTAL_TS_CONFIGFILE_PATH env var to allow passing tailscaled config in a file (#10759 ) * cmd/containerboot: optionally configure tailscaled with a configfile. If EXPERIMENTAL_TS_CONFIGFILE_PATH env var is set, only run tailscaled with the provided config file. Do not run 'tailscale up' or 'tailscale set'. * cmd/containerboot: store containerboot accept_dns val in bool pointer So that we can distinguish between the value being set to false explicitly bs being unset. Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Adrian Dewhurst	c05c4bdce4	ipn: apply ControlURL policy before login Unlike most prefs, the ControlURL policy needs to take effect before login. This resolves an issue where on first start, even when the ControlURL policy is set, it will generate a login URL to the Tailscale SaaS server. Updates tailscale/coral#118 Fixes #10736 Change-Id: I6da2a521f64028c15dbb6ac8175839fc3cc4e858 Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	10 months ago
Andrew Dunham	d3574a350f	cmd/tailscale, ipn/ipnlocal: add 'debug dial-types' command This command allows observing whether a given dialer ("SystemDial", "UserDial", etc.) will successfully obtain a connection to a provided host, from inside tailscaled itself. This is intended to help debug a variety of issues from subnet routers to split DNS setups. Updates #9619 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ie01ebb5469d3e287eac633ff656783960f697b84	10 months ago
Andrew Dunham	46bdbb3878	cmd/tailscaled, tsnet: don't return an interface containing a nil pointer This tripped me up when I was testing something and wrote: if conn != nil { conn.Close() } In netstack mode, when an error occurred we were getting a non-nil error and a non-nil interface that contained a nil pointer. Instead, just return a nil interface value. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Id9ef3dd24529e0e8c53adc60ed914c31fbb10cc4	10 months ago
Irbe Krumina	3a9450bc06	cmd/containerboot: don't parse empty subnet routes (#10738 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	5a2eb26db3	cmd/containerboot: ensure that subnet routes can be unset. (#10734 ) A Tailnet node can be told to stop advertise subnets by passing an empty string to --advertise-routes flag. Respect an explicitly passed empty value to TS_ROUTES env var so that users have a way to stop containerboot acting as a subnet router without recreating it. Distinguish between TS_ROUTES being unset and empty. Updates tailscale/tailscale#10708 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Aaron Klotz	e32a064659	cmd/tailscaled: don't create a network monitor in the parent tailscaled on Windows The service is only used as a watchdog and for piping logs from the child process. We shouldn't be creating a network monitor in that case. Fixes #10732 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	10 months ago
Chris Palmer	5deeb56b95	cmd/tailscale/cli: document usage more clearly (#10681 ) The IP argument is required; only the port is optional. Updates #10605 Signed-off-by: Chris Palmer <cpalmer@tailscale.com>	10 months ago
Andrew Lytvynov	2716250ee8	all: cleanup unused code, part 2 (#10670 ) And enable U1000 check in staticcheck. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Gavin Greenwalt	865ee25a57	cmd/tailscale/cli: update debug.go (#10644 ) redundant run "portmap debugging" word 'debugging' Signed-off-by: Gavin Greenwalt <gavin@sfstudios.com>	11 months ago
Andrew Dunham	a661287c4b	util/cmpx: remove code that's in the stdlib now The cmpx.Compare function (and associated interface) are now available in the standard library as cmp.Compare. Remove our version of it and use the version from the standard library. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I4be3ac63d466c05eb7a0babb25cb0d41816fbd53	11 months ago
Andrew Lytvynov	945cf836ee	ipn: apply tailnet-wide default for auto-updates (#10508 ) When auto-update setting in local Prefs is unset, apply the tailnet default value from control. This only happens once, when we apply the default (or when the user manually overrides it), tailnet default no longer affects the node. Updates #16244 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Andrew Dunham	d05a572db4	net/portmapper: handle multiple UPnP discovery responses Instead of taking the first UPnP response we receive and using that to create port mappings, store all received UPnP responses, sort and deduplicate them, and then try all of them to obtain an external address. Updates #10602 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I783ccb1834834ee2a9ecbae2b16d801f2354302f	11 months ago
Irbe Krumina	38b4eb9419	cmd/k8s-operator/deploy/chart: document passing multiple proxy tags + log level values (#10624 ) Updates #cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
James Tucker	3a635db06e	cmd/connector-gen: add helper tool for wide app connector configurations connector-gen can initially generate connector ACL snippets and advertise-routes flags for Github and AWS based on their public IP / domain data. Updates ENG-2425 Signed-off-by: James Tucker <james@tailscale.com>	11 months ago
Irbe Krumina	1a08ea5990	cmd/k8s-operator: operator can create subnetrouter (#9505 ) * k8s-operator,cmd/k8s-operator,Makefile,scripts,.github/workflows: add Connector kube CRD. Connector CRD allows users to configure the Tailscale Kubernetes operator to deploy a subnet router to expose cluster CIDRs or other CIDRs available from within the cluster to their tailnet. Also adds various CRD related machinery to generate CRD YAML, deep copy implementations etc. Engineers will now have to run 'make kube-generate-all` after changing kube files to ensure that all generated files are up to date. * cmd/k8s-operator,k8s-operator: reconcile Connector resources Reconcile Connector resources, create/delete subnetrouter resources in response to changes to Connector(s). Connector reconciler will not be started unless ENABLE_CONNECTOR env var is set to true. This means that users who don't want to use the alpha Connector custom resource don't have to install the Connector CRD to their cluster. For users who do want to use it the flow is: - install the CRD - install the operator (via Helm chart or using static manifests). For Helm users set .values.enableConnector to true, for static manifest users, set ENABLE_CONNECTOR to true in the static manifest. Updates tailscale/tailscale#502 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Andrew Dunham	727acf96a6	net/netcheck: use DERP frames as a signal for home region liveness This uses the fact that we've received a frame from a given DERP region within a certain time as a signal that the region is stil present (and thus can still be a node's PreferredDERP / home region) even if we don't get a STUN response from that region during a netcheck. This should help avoid DERP flaps that occur due to losing STUN probes while still having a valid and active TCP connection to the DERP server. RELNOTE=Reduce home DERP flapping when there's still an active connection Updates #8603 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: If7da6312581e1d434d5c0811697319c621e187a0	11 months ago
Maisem Ali	3aa6468c63	cmd/tailscale/cli: add whois subcommand Initial implementation of a `tailscale whois` subcommand which allows users to observe metadata associated with a Tailscale IP. It also has a `--json` flag to allow consumption programmatically. Updates #4217 Signed-off-by: Maisem Ali <maisem@tailscale.com>	11 months ago
Maisem Ali	fb632036e3	cmd/k8s-operator: drop https:// in capName Add the new format but keep respecting the old one. Updates #4217 Signed-off-by: Maisem Ali <maisem@tailscale.com>	11 months ago
Sonia Appasamy	c2fe123232	cmd/tailscaled: update ConfigureWebClient's UseSocketOnly value Previously were always setting `UseSocketOnly` because we were comparing `args.socketpath != ""`, but `args.socketpath` flag always gets filled with `paths.DefaultTailscaledSocket()` when not provided. Rather than comparing to the empty string, compare to the default value to determine if `UseSocketOnly` should be set. Should fix issue with web client being unreachable for Mac App Store variant of the mac build. Updates #16054 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	11 months ago
Andrew Lytvynov	d8493d4bd5	clientupdate: add explicit Track to Arguments (#10548 ) Instead of overloading the Version field, add an explicit Track field. This fixes a bug where passing a track name in `args.Version` would keep the track name in `updater.Version` and pass it down the code path to commands like `apt-get install`. Now, `updater.Version` should always be a version (or empty string). Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Maisem Ali	7bdea283bd	cmd/containerboot: symlink TS_SOCKET to socket expected by CLI `tailscaled` and `tailscale` expect the socket to be at `/var/run/tailscale/tailscaled.sock`, however containerboot would set up the socket at `/tmp/tailscaled.sock`. This leads to a poor UX when users try to use any `tailscale` command as they have to prefix everything with `--socket /tmp/tailscaled.sock`. To improve the UX, this adds a symlink to `/var/run/tailscale/tailscaled.sock` to point to `/tmp/tailscaled.sock`. This approach has two benefits, 1 users are able to continue to use existing scripts without this being a breaking change. 2. users are able to use the `tailscale` CLI without having to add the `--socket` flag. Fixes tailscale/corp#15902 Fixes #6849 Fixes #10027 Signed-off-by: Maisem Ali <maisem@tailscale.com>	11 months ago
Andrew Lytvynov	e25f114916	ipn,cmd/tailscale/cli: support hierarchical MaskedPrefs (#10507 ) Some fields if `ipn.Prefs` are structs. `ipn.MaskedPrefs` has a single level of boolean `*Set` flags, which doesn't map well to nested structs within `ipn.Prefs`. Change `MaskedPrefs` and `ApplyEdits` to support `FooSet` struct fields that map to a nested struct of `ipn.Prefs` like `AutoUpdates`. Each struct field in `MaskedPrefs` is just a bundle of more `Set` bool fields or other structs. This allows you to have a `Set` flag for any arbitrarily-nested field of `ipn.Prefs`. Also, make `ApplyEdits` match fields between `Prefs` and `MaskedPrefs` by name instead of order, to make it a bit less finicky. It's probably slower but `ipn.ApplyEdits` should not be in any hot path. As a result, `AutoUpdate.Check` and `AutoUpdate.Apply` fields don't clobber each other when set individually. Updates #16247 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Aaron Klotz	0f646937e9	clientupdate: remove TS_NOLAUNCH and GUI restart hacks from autoupdate We've fixed the underlying issue in github.com/tailscale/corp/issues/13998. Fixes #10513 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	11 months ago
Sonia Appasamy	e5e5ebda44	client/web: precompress assets Precompress webclient assets with precompress util. This cuts our css and js build sizes to about 1/3 of non-compressed size. Similar compression done on tsconnect and adminhttp assets. Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	11 months ago
Andrew Dunham	3f576fc4ca	ci: run 'go vet' in golangci-lint; fix errors in tests Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ice78fc907bad24c1de749a1595e212ef2db4b8bb	11 months ago
Naman Sood	0a59754eda	linuxfw,wgengine/route,ipn: add c2n and nodeattrs to control linux netfilter Updates tailscale/corp#14029. Signed-off-by: Naman Sood <mail@nsood.in>	11 months ago
Matt Layher	a217f1fccf	all: fix nilness issues Signed-off-by: Matt Layher <mdlayher@gmail.com>	11 months ago
Irbe Krumina	49fd0a62c9	cmd/k8s-operator: generate static kube manifests from the Helm chart. (#10436 ) * cmd/k8s-operator: generate static manifests from Helm charts This is done to ensure that there is a single source of truth for the operator kube manifests. Also adds linux node selector to the static manifests as this was added as a default to the Helm chart. Static manifests can now be generated by running `go generate tailscale.com/cmd/k8s-operator`. Updates tailscale/tailscale#9222 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Sonia Appasamy	7a4ba609d9	client/web: show features based on platform support Hiding/disabling UI features when not available on the running client. Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	11 months ago
Marwan Sulaiman	b819f66eb1	tsweb: propagate RequestID via context and entire request The recent addition of RequestID was only populated if the HTTP Request had returned an error. This meant that the underlying handler has no access to this request id and any logs it may have emitted were impossible to correlate to that request id. Therefore, this PR adds a middleware to generate request ids and pass them through the request context. The tsweb.StdHandler automatically populates this request id if the middleware is being used. Finally, inner handlers can use the context to retrieve that same request id and use it so that all logs and events can be correlated. Updates #2549 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	11 months ago
Claire Wang	8af503b0c5	syspolicy: add exit node related policies (#10172 ) Adds policy keys ExitNodeID and ExitNodeIP. Uses the policy keys to determine the exit node in preferences. Fixes tailscale/corp#15683 Signed-off-by: Claire Wang <claire@tailscale.com>	11 months ago
Andrew Lytvynov	ac4b416c5b	cmd/tailscale,ipn/ipnlocal: pass available update as health message (#10420 ) To be consistent with the formatting of other warnings, pass available update health message instead of handling ClientVersion in he CLI. Fixes #10312 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Andrew Lytvynov	5a9e935597	clientupdate: implement update for Unraid (#10344 ) Use the [`plugin` CLI](https://forums.unraid.net/topic/72240-solved-is-there-a-way-to-installuninstall-plugins-from-script/#comment-676870) to fetch and apply the update. Updates https://github.com/tailscale/tailscale/issues/10184 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Sonia Appasamy	5f40b8a0bc	scripts/check_license_headers: enforce license on ts/tsx files Enforcing inclusion of our OSS license at the top of .ts and .tsx files. Also updates any relevant files in the repo that were previously missing the license comment. An additional `@license` comment is added to client/web/src/index.tsx to preserve the license in generated Javascript. Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	11 months ago
Jenny Zhang	d5d84f1a68	cmd/tailscale: also warn about IP forwarding if using CLI set We warn users about IP forwarding being disabled when using `--avertise-routes` in `tailscale up`, this adds the same warnings to `tailscale set`. Updates tailscale/corp#9968 Signed-off-by: Jenny Zhang <jz@tailscale.com>	12 months ago
Irbe Krumina	18ceb4e1f6	cmd/{containerboot,k8s-operator}: allow users to define tailnet egress target by FQDN (#10360 ) * cmd/containerboot: proxy traffic to tailnet target defined by FQDN Add a new Service annotation tailscale.com/tailnet-fqdn that users can use to specify a tailnet target for which an egress proxy should be deployed in the cluster. Updates tailscale/tailscale#10280 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	12 months ago
Claire Wang	afacf2e368	containerboot: Add TS_ACCEPT_ROUTES (#10176 ) Fixes tailscale/corp#15596 Signed-off-by: Claire Wang <claire@tailscale.com>	12 months ago
Gabriel Martinez	128d3ad1a9	cmd/k8s-operator: helm chart add missing keys (#10296 ) * cmd/k8s-operator: add missing keys to Helm values file Updates #10182 Signed-off-by: Gabriel Martinez <gabrielmartinez@sisti.pt>	12 months ago
Percy Wegmann	17501ea31a	ci: report test coverage to coveralls.io This records test coverage for the amd64 no race tests and uploads the results to coveralls.io. Updates #cleanup Signed-off-by: Ox Cart <ox.to.a.cart@gmail.com>	12 months ago
Irbe Krumina	66471710f8	cmd/k8s-operator: truncate long StatefulSet name prefixes (#10343 ) Kubernetes can generate StatefulSet names that are too long and result in invalid Pod revision hash label values. Calculate whether a StatefulSet name generated for a Service or Ingress will be too long and if so, truncate it. Updates tailscale/tailscale#10284 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	12 months ago
Irbe Krumina	dd8bc9ba03	cmd/k8s-operator: log user/group impersonated by apiserver proxy (#10334 ) Updates tailscale/tailscale#10127 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	12 months ago
Irbe Krumina	4f80f403be	cmd/k8s-operator: fix chart syntax error (#10333 ) Updates #9222 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	12 months ago
David Anderson	f867392970	cmd/tailscale/cli: add debug function to print the netmap It's possible to do this with a combination of watch-ipn and jq, but looking at the netmap while debugging is quite common, so it's nice to have a one-shot command to get it. Updates #cleanup Signed-off-by: David Anderson <danderson@tailscale.com>	12 months ago
David Anderson	fd22145b52	cmd/tailscale/cli: make 'debug watch-ipn' play nice with jq jq doens't like non-json output in the json stream, and works more happily when the input stream EOFs at some point. Move non-json words to stderr, and add a parameter to stop watching and exit after some number of objects. Updates #cleanup Signed-off-by: David Anderson <danderson@tailscale.com>	12 months ago
Marwan Sulaiman	2dc0645368	ipn/ipnlocal,cmd/tailscale: persist tailnet name in user profile This PR starts to persist the NetMap tailnet name in SetPrefs so that tailscaled clients can use this value to disambiguate fast user switching from one tailnet to another that are under the same exact login. We will also try to backfill this information during backend starts and profile switches so that users don't have to re-authenticate their profile. The first client to use this new information is the CLI in 'tailscale switch -list' which now uses text/tabwriter to display the ID, Tailnet, and Account. Since account names are ambiguous, we allow the user to pass 'tailscale switch ID' to specify the exact tailnet they want to switch to. Updates #9286 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	12 months ago
James Tucker	28684b0538	cmd/tailscale/cli: correct app connector help text in set Updates tailscale/corp#15437 Signed-off-by: James Tucker <james@tailscale.com>	12 months ago
Irbe Krumina	664ebb14d9	cmd/containerboot: fix unclean shutdown (#10035 ) * cmd/containerboot: shut down cleanly on SIGTERM Make sure that tailscaled watcher returns when SIGTERM is received and also that it shuts down before tailscaled exits. Updates tailscale/tailscale#10090 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	12 months ago
Brad Fitzpatrick	3bd382f369	wgengine/magicsock: add DERP homeless debug mode for testing In DERP homeless mode, a DERP home connection is not sought or maintained and the local node is not reachable. Updates #3363 Updates tailscale/corp#396 Change-Id: Ibc30488ac2e3cfe4810733b96c2c9f10a51b8331 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	12 months ago
Maisem Ali	57129205e6	cmd/tailscaled: make tun mode default on gokrazy Now that we have nftable support this works fine and force it on gokrazy since `25a8daf405`. Updates gokrazy/gokrazy#209 Signed-off-by: Maisem Ali <maisem@tailscale.com>	12 months ago
Maisem Ali	7d4221c295	cmd/tsidp: add start of OIDC Tailscale IdP Updates #10263 Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Change-Id: I240bc9b5ecf2df6f92c45929d105fde66c06a860 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	12 months ago
Sonia Appasamy	2dbd546766	client/web: remove DebugMode from GET /api/data No longer using this! Readonly state fully managed via auth endpoint. Also getting rid of old Legacy server mode. A #cleanup Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	12 months ago
Sonia Appasamy	6f7a1b51a8	ipn/ipnlocal: rename SetWebLocalClient to ConfigureWebClient For consistency with the "WebClient" naming of the other functions here. Also fixed a doc typo. A #cleanup Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	12 months ago
Aaron Klotz	855f79fad7	cmd/tailscaled, util/winutil: changes to process and token APIs in winutil This PR changes the internal getTokenInfo function to use generics. I also removed our own implementations for obtaining a token's user and primary group in favour of calling the ones now available in x/sys/windows. Furthermore, I added two new functions for working with tokens, logon session IDs, and Terminal Services / RDP session IDs. I modified our privilege enabling code to allow enabling of multiple privileges via one single function call. Finally, I added the ProcessImageName function and updated the code in tailscaled_windows.go to use that instead of directly calling the underlying API. All of these changes will be utilized by subsequent PRs pertaining to this issue. Updates https://github.com/tailscale/corp/issues/13998 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	12 months ago
Will Norris	9b537f7c97	ipn: remove the preview-webclient node capability Now that 1.54 has released, and the new web client will be included in 1.56, we can remove the need for the node capability. This means that all 1.55 unstable builds, and then eventually the 1.56 build, will work without setting the node capability. The web client still requires the "webclient" user pref, so this does NOT mean that the web client will be on by default for all devices. Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	12 months ago
Will Norris	303a1e86f5	cmd/tailscale: expose --webclient for all builds This removes the dev/unstable build check for the --webclient flag on `tailscale set`, so that it will be included in the next major stable release (1.56) Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	12 months ago
Andrew Dunham	e33bc64cff	net/dnsfallback: add singleflight to recursive resolver This prevents running more than one recursive resolution for the same hostname in parallel, which can use excessive amounts of CPU when called in a tight loop. Additionally, add tests that hit the network (when run with a flag) to test the lookup behaviour. Updates tailscale/corp#15261 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I39351e1d2a8782dd4c52cb04b3bd982eb651c81e	12 months ago
Sonia Appasamy	bb31912ea5	cmd/cli: remove --webclient flag from up Causing issues building a stable release. Getting rid of the flag for now because it was only available in unstable, can still be turned on through localapi. A #cleanup Co-authored-by: Will Norris <will@tailscale.com> Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	12 months ago
Andrew Lytvynov	c3f1bd4c0a	clientupdate: fix auto-update on Windows over RDP (#10242 ) `winutil.WTSGetActiveConsoleSessionId` only works for physical desktop logins and does not return the session ID for RDP logins. We need to `windows.WTSEnumerateSessions` and find the active session. Fixes https://github.com/tailscale/corp/issues/15772 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	12 months ago
Tom DNetto	90a0aafdca	cmd/tailscale: warn if app-connector is enabled without ip forwarding Fixes: ENG-2446 Signed-off-by: Tom DNetto <tom@tailscale.com>	12 months ago
Naman Sood	e57fd9cda4	ipn/{ipnlocal,ipnstate,localapi}: add localapi endpoints for client self-update (#10188 ) * ipn/{ipnlocal,ipnstate,localapi}: add localapi endpoints for client self-update Updates #10187. Signed-off-by: Naman Sood <mail@nsood.in> * depaware Updates #10187. Signed-off-by: Naman Sood <mail@nsood.in> * address review feedback Signed-off-by: Naman Sood <mail@nsood.in> --------- Signed-off-by: Naman Sood <mail@nsood.in>	1 year ago
Andrew Lytvynov	55cd5c575b	ipn/localapi: only perform local-admin check in serveServeConfig (#10163 ) On unix systems, the check involves executing sudo, which is slow. Instead of doing it for every incoming request, move the logic into localapi serveServeConfig handler and do it as needed. Updates tailscale/corp#15405 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
Jordan Whited	12d5c99b04	client/tailscale,ipn/{ipnlocal,localapi}: check UDP GRO config (#10071 ) Updates tailscale/corp#9990 Signed-off-by: Jordan Whited <jordan@tailscale.com>	1 year ago
Andrew Lytvynov	1fc1077052	ssh/tailssh,util: extract new osuser package from ssh code (#10170 ) This package is a wrapper for os/user that handles non-cgo builds, gokrazy and user shells. Updates tailscale/corp#15405 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
Will Norris	fdbe511c41	cmd/tailscale: add -webclient flag to up and set Initially, only expose this flag on dev and unstable builds. Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Sonia Appasamy	942d720a16	cli/web: don't block startup on status req If the status request to check for the preview node cap fails, continue with starting up the legacy client. Updates tailscale/corp#14335 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	1 year ago
Will Norris	7e81c83e64	cmd/tailscale: respect existing web client pref After running `tailscale web`, only disable the user pref if it was not already previously set. Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Sonia Appasamy	0ecfc1d5c3	client/web: fill devMode from an env var Avoids the need to pipe a web client dev flag through the tailscaled command. Updates tailscale/corp#14335 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	1 year ago
Sonia Appasamy	191e2ce719	client/web: add ServerMode to web.Server Adds a new Mode to the web server, indicating the specific scenario the constructed server is intended to be run in. Also starts filling this from the cli/web and ipn/ipnlocal callers. From cli/web this gets filled conditionally based on whether the preview web client node cap is set. If not set, the existing "legacy" client is served. If set, both a login/lobby and full management client are started (in "login" and "manage" modes respectively). Updates tailscale/corp#14335 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	1 year ago
James Tucker	f27b2cf569	appc,cmd/sniproxy,ipn/ipnlocal: split sniproxy configuration code out of appc The design changed during integration and testing, resulting in the earlier implementation growing in the appc package to be intended now only for the sniproxy implementation. That code is moved to it's final location, and the current App Connector code is now renamed. Updates tailscale/corp#15437 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Aaron Klotz	47019ce1f1	cmd/tailscaled: pre-load wintun.dll using a fully-qualified path In corp PR #14970 I updated the installer to set a security mitigation that always forces system32 to the front of the Windows dynamic linker's search path. Unfortunately there are other products out there that, partying like it's 1995, drop their own, older version of wintun.dll into system32. Since we look there first, we end up loading that old version. We can fix this by preloading wintun using a fully-qualified path. When wintun-go then loads wintun, the dynamic linker will hand it the module that was previously loaded by us. Fixes #10023, #10025, #10052 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	1 year ago
Irbe Krumina	af49bcaa52	cmd/k8s-operator: set different app type for operator with proxy (#10081 ) Updates tailscale/tailscale#9222 plain k8s-operator should have hostinfo.App set to 'k8s-operator', operator with proxy should have it set to 'k8s-operator-proxy'. In proxy mode, we were setting the type after it had already been set to 'k8s-operator' Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 year ago
James Tucker	6ad54fed00	appc,ipn/ipnlocal: add App Connector domain configuration from mapcap The AppConnector is now configured by the mapcap from the control plane. Updates tailscale/corp#15437 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
James Tucker	b48b7d82d0	appc,ipn/ipnlocal,net/dns/resolver: add App Connector wiring when enabled in prefs An EmbeddedAppConnector is added that when configured observes DNS responses from the PeerAPI. If a response is found matching a configured domain, routes are advertised when necessary. The wiring from a configuration in the netmap capmap is not yet done, so while the connector can be enabled, no domains can yet be added. Updates tailscale/corp#15437 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
David Anderson	37863205ec	cmd/k8s-operator: strip credentials from client config in noauth mode Updates tailscale/corp#15526 Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
Rhea Ghosh	970eb5e784	cmd/k8s-operator: sanitize connection headers (#10063 ) Fixes tailscale/corp#15526 Signed-off-by: Rhea Ghosh <rhea@tailscale.com>	1 year ago
James Tucker	ca4c940a4d	ipn: introduce app connector advertisement preference and flags Introduce a preference structure to store the setting for app connector advertisement. Introduce the associated flags: tailscale up --advertise-connector{=true,=false} tailscale set --advertise-connector{=true,=false} ``` % tailscale set --advertise-connector=false % tailscale debug prefs \| jq .AppConnector.Advertise false % tailscale set --advertise-connector=true % tailscale debug prefs \| jq .AppConnector.Advertise true % tailscale up --advertise-connector=false % tailscale debug prefs \| jq .AppConnector.Advertise false % tailscale up --advertise-connector=true % tailscale debug prefs \| jq .AppConnector.Advertise true ``` Updates tailscale/corp#15437 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Irbe Krumina	c2b87fcb46	cmd/k8s-operator/deploy/chart,.github/workflows: use helm chart API v2 (#10055 ) API v1 is compatible with helm v2 and v2 is not. However, helm v2 (the Tiller deployment mechanism) was deprecated in 2020 and no-one should be using it anymore. This PR also adds a CI lint test for helm chart Updates tailscale/tailscale#9222 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 year ago
Will Norris	66c7af3dd3	ipn: replace web client debug flag with node capability Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Brad Fitzpatrick	3d7fb6c21d	derp/derphttp: fix race in mesh watcher The derphttp client automatically reconnects upon failure. RunWatchConnectionLoop called derphttp.Client.WatchConnectionChanges once, but that wrapper method called the underlying derp.Client.WatchConnectionChanges exactly once on derphttp.Client's currently active connection. If there's a failure, we need to re-subscribe upon all reconnections. This removes the derphttp.Client.WatchConnectionChanges method, which was basically impossible to use correctly, and changes it to be a boolean field on derphttp.Client alongside MeshKey and IsProber. Then it moves the call to the underlying derp.Client.WatchConnectionChanges to derphttp's client connection code, so it's resubscribed on any reconnect. Some paranoia is then added to make sure people hold the API right, not calling derphttp.Client.RunWatchConnectionLoop on an already-started Client without having set the bool to true. (But still auto-setting it to true if that's the first method that's been called on that derphttp.Client, as is commonly the case, and prevents existing code from breaking) Fixes tailscale/corp#9916 Supercedes tailscale/tailscale#9719 Co-authored-by: Val <valerie@tailscale.com> Co-authored-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com> Signed-off-by: Brad Fitzpatrick <brad@danga.com>	1 year ago
Tom DNetto	a7c80c332a	cmd/sniproxy: implement support for control configuration, multiple addresses * Implement missing tests for sniproxy * Wire sniproxy to new appc package * Add support to tsnet for routing subnet router traffic into netstack, so it can be handled Updates: https://github.com/tailscale/corp/issues/15038 Signed-off-by: Tom DNetto <tom@tailscale.com>	1 year ago
Will Norris	28ad910840	ipn: add user pref for running web client This is not currently exposed as a user-settable preference through `tailscale up` or `tailscale set`. Instead, the preference is set when turning the web client on and off via localapi. In a subsequent commit, the pref will be used to automatically start the web client on startup when appropriate. Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Sonia Appasamy	89953b015b	ipn/ipnlocal,client/web: add web client to tailscaled Allows for serving the web interface from tailscaled, with the ability to start and stop the server via localapi endpoints (/web/start and /web/stop). This will be used to run the new full management web client, which will only be accessible over Tailscale (with an extra auth check step over noise) from the daemon. This switch also allows us to run the web interface as a long-lived service in environments where the CLI version is restricted to CGI, allowing us to manage certain auth state in memory. ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for ios builds to satisfy ios restriction from adding "text/template" and "html/template" dependencies. Updates tailscale/corp#14335 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	1 year ago
Irbe Krumina	ed1b935238	cmd/k8s-operator: allow to install operator via helm (#9920 ) Initial helm manifests. Updates tailscale/tailscale#9222 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	9107b5eadf	cmd/tailscale/cli: use status before doing interactive feature query We were inconsistent whether we checked if the feature was already enabled which we could do cheaply using the locally available status. We would do the checks fine if we were turning on funnel, but not serve. This moves the cap checks down into enableFeatureInteractive so that are always run. Updates #9984 Co-authored-by: Tyler Smalley <tyler@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Aaron Klotz	95671b71a6	ipn, safesocket: use Windows token in LocalAPI On Windows, the idiomatic way to check access on a named pipe is for the server to impersonate the client on its current OS thread, perform access checks using the client's access token, and then revert the OS thread's access token back to its true self. The access token is a better representation of the client's rights than just a username/userid check, as it represents the client's effective rights at connection time, which might differ from their normal rights. This patch updates safesocket to do the aforementioned impersonation, extract the token handle, and then revert the impersonation. We retain the token handle for the remaining duration of the connection (the token continues to be valid even after we have reverted back to self). Since the token is a property of the connection, I changed ipnauth to wrap the concrete net.Conn to include the token. I then plumbed that change through ipnlocal, ipnserver, and localapi as necessary. I also added a PermitLocalAdmin flag to the localapi Handler which I intend to use for controlling access to a few new localapi endpoints intended for configuring auto-update. Updates https://github.com/tailscale/tailscale/issues/755 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	1 year ago
Tyler Smalley	131518eed1	cmd/tailscale/cli: improve error when bg serve config is present (#9961 ) We prevent shodow configs when starting a foreground when a background serve config already exists for the serve type and port. This PR improves the messaging to let the user know how to remove the previous config. Updates #8489 ENG-2314 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	1 year ago
Tyler Smalley	1873bc471b	cmd/tailscale/cli: remove http flag for funnel command (#9955 ) The `--http` flag can not be used with Funnel, so we should remove it to remove confusion. Updates #8489 ENG-2316 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	1 year ago
Marwan Sulaiman	5f3cdaf283	cmd/tailscale/cli: chage port flags to uint for serve and funnel This PR changes the -https, -http, -tcp, and -tls-terminated-tcp flags from string to int and also updates the validation to ensure they fit the uint16 size as the flag library does not have a Uint16Var method. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Marwan Sulaiman	a7e4cebb90	cmd/tailscale/cli: refactor TestServeDevConfigMutations The TestServeDevConfigMutations test has 63 steps that all run under the same scope. This tests breaks them out into isolated subtests that can be run independently. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Andrew Lytvynov	21b6d373b0	cmd/tailscale/cli: unhide auto-update flags and mark update as Beta (#9954 ) Updates #755 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
Marwan Sulaiman	f5a7551382	cmd/tailscale: fix help message for serve funnel We currently print out "run tailscale serve --help" when the subcmd might be funnel. This PR ensures the right subcmd is passed. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Andrew Lytvynov	d3bc575f35	cmd/tailscale/cli: set Sparkle auto-update on macsys (#9952 ) On `tailscale set --auto-update`, set the Sparkle plist option for it. Also make macsys report not supporting auto-updates over c2n, since they will be triggered by Sparkle locally. Updates #755 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
Tyler Smalley	269a498c1e	cmd/tailscale/cli: serve --set-path should not force background mode (#9905 ) A few people have run into issues with understanding why `--set-path` started in background mode, and/or why they couldn't use a path in foreground mode. This change allows `--set-path` to be used in either case (foreground or background). updates #8489 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	1 year ago
Andrew Lytvynov	593c086866	clientupdate: distinguish when auto-updates are possible (#9896 ) clientupdate.Updater will have a non-nil Update func in a few cases where it doesn't actually perform an update: * on Arch-like distros, where it prints instructions on how to update * on macOS app store version, where it opens the app store page Add a new clientupdate.Arguments field to cause NewUpdater to fail when we hit one of these cases. This results in c2n updates being "not supported" and `tailscale set --auto-update` returning an error. Updates #755 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago

1 2 3 4 5 ...

1783 Commits (e070af74145692883dd5255b24798eefaaf366de)