The CLI "up" command is a historical mess, both on the CLI side and
the LocalBackend side. We're getting closer to cleaning it up, but in
the meantime it was again implicated in flaky tests.
In this case, the background goroutine running WatchIPNBus was very
occasionally running enough to get to its StartLoginInteractive call
before the original goroutine did its Start call. That meant
integration tests were very rarely but sometimes logging in with the
default control plane URL out on the internet
(controlplane.tailscale.com) instead of the localhost control server
for tests.
This also might've affected new Headscale etc users on initial "up".
Fixes#11960Fixes#11962
Change-Id: I36f8817b69267a99271b5ee78cb7dbf0fcc0bd34
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP.
This is primarily necessary to properly dial internal DNS servers accessible
over Tailscale and subnet routes. However, to avoid issues when switching
between Wi-Fi and cellular, we need to ensure that we don't retain connections
to any external addresses on the old interface. Therefore, we need to determine
which dialer to use internally based on the configured routes.
This plumbs routes and localRoutes from router.Config to tsdial.Dialer,
and updates UserDial to use either the peer dialer or the system dialer,
depending on the network address and the configured routes.
Updates tailscale/corp#18725
Fixes#4529
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The netcheck client, when no UDP is available, probes distance using
HTTPS.
Several problems:
* It probes using /derp/latency-check.
* But cmd/derper serves the handler at /derp/probe
* Despite the difference, it work by accident until c8f4dfc8c0
which made netcheck's probe require a 2xx status code.
* in tests, we only use derphttp.Handler, so the cmd/derper-installed
mux routes aren't preesnt, so there's no probe. That breaks
tests in airplane mode. netcheck.Client then reports "unexpected
HTTP status 426" (Upgrade Required)
This makes derp handle both /derp/probe and /derp/latency-check
equivalently, and in both cmd/derper and derphttp.Handler standalone
modes.
I notice this when wgengine/magicsock TestActiveDiscovery was failing
in airplane mode (no wifi). It still doesn't pass, but it gets
further.
Fixes#11989
Change-Id: I45213d4bd137e0f29aac8bd4a9ac92091065113f
Not buying wifi on a short flight is a good way to find tests
that require network. Whoops.
Updates #cleanup
Change-Id: Ibe678e9c755d27269ad7206413ffe9971f07d298
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
cmd/k8s-operator: optionally update dnsrecords Configmap with DNS records for proxies.
This commit adds functionality to automatically populate
DNS records for the in-cluster ts.net nameserver
to allow cluster workloads to resolve MagicDNS names
associated with operator's proxies.
The records are created as follows:
* For tailscale Ingress proxies there will be
a record mapping the MagicDNS name of the Ingress
device and each proxy Pod's IP address.
* For cluster egress proxies, configured via
tailscale.com/tailnet-fqdn annotation, there will be
a record for each proxy Pod, mapping
the MagicDNS name of the exposed
tailnet workload to the proxy Pod's IP.
No records will be created for any other proxy types.
Records will only be created if users have configured
the operator to deploy an in-cluster ts.net nameserver
by applying tailscale.com/v1alpha1.DNSConfig.
It is user's responsibility to add the ts.net nameserver
as a stub nameserver for ts.net DNS names.
https://kubernetes.io/docs/tasks/administer-cluster/dns-custom-nameservers/#configuration-of-stub-domain-and-upstream-nameserver-using-corednshttps://cloud.google.com/kubernetes-engine/docs/how-to/kube-dns#upstream_nameservers
See also https://github.com/tailscale/tailscale/pull/11017
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This configures localClient correctly during flag parsing, so that the --socket
option is effective when generating tab-completion results. For example, the
following would not connect to the system Tailscale for tab-completion results:
tailscale --socket=/tmp/tailscaled.socket switch <TAB>
Updates #3793
Signed-off-by: Paul Scott <paul@tailscale.com>
cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values.
Fixes#11947
Signed-off-by: Gabe Gorelick <gabe@hightouch.io>
* cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster.
Adds a simple nameserver that can respond to A record queries for ts.net DNS names.
It can respond to queries from in-memory records, populated from a ConfigMap
mounted at /config. It dynamically updates its records as the ConfigMap
contents changes.
It will respond with NXDOMAIN to queries for any other record types
(AAAA to be implemented in the future).
It can respond to queries over UDP or TCP. It runs a miekg/dns
DNS server with a single registered handler for ts.net domain names.
Queries for other domain names will be refused.
The intended use of this is:
1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet
services exposed via Tailscale operator egress over HTTPS
2) to allow non-tailnet cluster workloads to talk to workloads in
the same cluster that have been exposed to tailnet over their
MagicDNS names but on their cluster IPs.
DNSConfig CRD can be used to configure
the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Before attempting to enable IPv6 forwarding in the proxy init container
check if the relevant module is found, else the container crashes
on hosts that don't have it.
Updates#11860
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/containerboot,kube,ipn/store/kubestore: allow interactive login and empty state Secrets, check perms
* Allow users to pre-create empty state Secrets
* Add a fake internal kube client, test functionality that has dependencies on kube client operations.
* Fix an issue where interactive login was not allowed in an edge case where state Secret does not exist
* Make the CheckSecretPermissions method report whether we have permissions to create/patch a Secret if it's determined that these operations will be needed
Updates tailscale/tailscale#11170
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
... in prep for merging the net/interfaces package into net/netmon.
This is a no-op change that updates a bunch of the API signatures ahead of
a future change to actually move things (and remove the type alias)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I477613388f09389214db0d77ccf24a65bff2199c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Modifies containerboot to wait on tailscaled process
only, not on any child process of containerboot.
Waiting on any subprocess was racing with Go's
exec.Cmd.Run, used to run iptables commands and
that starts its own subprocesses and waits on them.
Containerboot itself does not run anything else
except for tailscaled, so there shouldn't be a need
to wait on anything else.
Updates tailscale/tailscale#11593
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This has been a TODO for ages. Time to do it.
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached.
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a new .spec.metrics field to ProxyClass to allow users to optionally serve
client metrics (tailscaled --debug) on <Pod-IP>:9001.
Metrics cannot currently be enabled for proxies that egress traffic to tailnet
and for Ingress proxies with tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation
(because they currently forward all cluster traffic to their respective backends).
The assumption is that users will want to have these metrics enabled
continuously to be able to monitor proxy behaviour (as opposed to enabling
them temporarily for debugging). Hence we expose them on Pod IP to make it
easier to consume them i.e via Prometheus PodMonitor.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name
Adds support for optionally configuring containerboot to proxy
traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var
to containerboot.
Containerboot will periodically (every 10 minutes) attempt to resolve
the DNS name and ensure that all traffic sent to the node's
tailnet IP gets forwarded to the resolved backend IP addresses.
Currently:
- if the firewall mode is iptables, traffic will be load balanced
accross the backend IP addresses using round robin. There are
no health checks for whether the IPs are reachable.
- if the firewall mode is nftables traffic will only be forwarded
to the first IP address in the list. This is to be improved.
* cmd/k8s-operator: support ExternalName Services
Adds support for exposing endpoints, accessible from within
a cluster to the tailnet via DNS names using ExternalName Services.
This can be done by annotating the ExternalName Service with
tailscale.com/expose: "true" annotation.
The operator will deploy a proxy configured to route tailnet
traffic to the backend IPs that service.spec.externalName
resolves to. The backend IPs must be reachable from the operator's
namespace.
Updates tailscale/tailscale#10606
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
There is an undocumented 16KiB limit for text log messages.
However, the limit for JSON messages is 256KiB.
Even worse, logging JSON as text results in significant overhead
since each double quote needs to be escaped.
Instead, use logger.Logf.JSON to explicitly log the info as JSON.
We also modify osdiag to return the information as structured data
rather than implicitly have the package log on our behalf.
This gives more control to the caller on how to log.
Updates #7802
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Creates new QNAP builder target, which builds go binaries then uses
docker to build into QNAP packages. Much of the docker/script code
here is pulled over from https://github.com/tailscale/tailscale-qpkg,
with adaptation into our builder structures.
The qnap/Tailscale folder contains static resources needed to build
Tailscale qpkg packages, and is an exact copy of the existing folder
in the tailscale-qpkg repo.
Builds can be run with:
```
sudo ./tool/go run ./cmd/dist build qnap
```
Updates tailscale/tailscale-qpkg#135
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Kubernetes cluster domain defaults to 'cluster.local', but can also be customized.
We need to determine cluster domain to set up in-cluster forwarding to our egress proxies.
This was previously hardcoded to 'cluster.local', so was the egress proxies were not usable in clusters with custom domains.
This PR ensures that we attempt to determine the cluster domain by parsing /etc/resolv.conf.
In case the cluster domain cannot be determined from /etc/resolv.conf, we fall back to 'cluster.local'.
Updates tailscale/tailscale#10399,tailscale/tailscale#11445
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Some editions of Windows server share the same build number as their
client counterpart; we must use an additional field found in the OS
version information to distinguish between them.
Even though "Distro" has Linux connotations, it is the most appropriate
hostinfo field. What is Windows Server if not an alternate distribution
of Windows? This PR populates Distro with "Server" when applicable.
Fixes#11785
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
The approach is lifted from cobra: `tailscale completion bash` emits a bash
script for configuring the shell's autocomplete:
. <( tailscale completion bash )
so that typing:
tailscale st<TAB>
invokes:
tailscale completion __complete -- st
RELNOTE=tailscale CLI now supports shell tab-completion
Fixes#3793
Signed-off-by: Paul Scott <paul@tailscale.com>
Seems to deflake tstest/integration tests. I can't reproduce it
anymore on one of my VMs that was consistently flaking after a dozen
runs before. Now I can run hundreds of times.
Updates #11649Fixes#7036
Change-Id: I2f7d4ae97500d507bdd78af9e92cd1242e8e44b8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds new ProxyClass.spec.statefulSet.pod.{tailscaleContainer,tailscaleInitContainer}.Env field
that allow users to provide key, value pairs that will be set as env vars for the respective containers.
Allow overriding all containerboot env vars,
but warn that this is not supported and might break (in docs + a warning when validating ProxyClass).
Updates tailscale/tailscale#10709
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
At least in userspace-networking mode.
Fixes#11361
Change-Id: I78d33f0f7e05fe9e9ee95b97c99b593f8fe498f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Changes made:
* Avoid "encoding/json" for JSON processing, and instead use
"github.com/go-json-experiment/json/jsontext".
Use jsontext.Value.IsValid for validation, which is much faster.
Use jsontext.AppendQuote instead of our own JSON escaping.
* In drainPending, use a different maxLen depending on lowMem.
In lowMem mode, it is better to perform multiple uploads
than it is to construct a large body that OOMs the process.
* In drainPending, if an error is encountered draining,
construct an error message in the logtail JSON format
rather than something that is invalid JSON.
* In appendTextOrJSONLocked, use jsontext.Decoder to check
whether the input is a valid JSON object. This is faster than
the previous approach of unmarshaling into map[string]any and
then re-marshaling that data structure.
This is especially beneficial for network flow logging,
which produces relatively large JSON objects.
* In appendTextOrJSONLocked, enforce maxSize on the input.
If too large, then we may end up in a situation where the logs
can never be uploaded because it exceeds the maximum body size
that the Tailscale logs service accepts.
* Use "tailscale.com/util/truncate" to properly truncate a string
on valid UTF-8 boundaries.
* In general, remove unnecessary spaces in JSON output.
Performance:
name old time/op new time/op delta
WriteText 776ns ± 2% 596ns ± 1% -23.24% (p=0.000 n=10+10)
WriteJSON 110µs ± 0% 9µs ± 0% -91.77% (p=0.000 n=8+8)
name old alloc/op new alloc/op delta
WriteText 448B ± 0% 0B -100.00% (p=0.000 n=10+10)
WriteJSON 37.9kB ± 0% 0.0kB ± 0% -99.87% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
WriteText 1.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10)
WriteJSON 1.08k ± 0% 0.00k ± 0% -99.91% (p=0.000 n=10+10)
For text payloads, this is 1.30x faster.
For JSON payloads, this is 12.2x faster.
Updates #cleanup
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Request ID generation appears prominently in some services cumulative
allocation rate, and while this does not eradicate this issue (the API
still makes UUID objects), it does improve the overhead of this API and
reduce the amount of garbage that it produces.
Updates tailscale/corp#18266
Updates tailscale/corp#19054
Signed-off-by: James Tucker <james@tailscale.com>
This removes a potentially increased boot delay for certain boot
topologies where they block on ExecStartPre that may have socket
activation dependencies on other system services (such as
systemd-resolved and NetworkManager).
Also rename cleanup to clean up in affected/immediately nearby places
per code review commentary.
Fixes#11599
Signed-off-by: James Tucker <james@tailscale.com>
Also capitalises the start of all ShortHelp, allows subcommands to be hidden
with a "HIDDEN: " prefix in their ShortHelp, and adds a TS_DUMP_HELP envknob
to look at all --help messages together.
Fixes#11664
Signed-off-by: Paul Scott <paul@tailscale.com>
And add a test.
Regression from a5e1f7d703Fixestailscale/corp#19036
Change-Id: If90984049af0a4820c96e1f77ddf2fce8cb3043f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
cmd/tailscale/cli: respect $KUBECONFIG
* `$KUBECONFIG` is a `$PATH`-like: it defines a *list*.
`tailscale config kubeconfig` works like the rest of the
ecosystem so that if $KUBECONFIG is set it will write to the first existant file in the list, if none exist then
the final entry in the list.
* if `$KUBECONFIG` is an empty string, the old logic takes over.
Notes:
* The logic for file detection is inlined based on what `kind` does.
Technically it's a race condition, since the file could be removed/added
in between the processing steps, but the fallout shouldn't be too bad.
https://github.com/kubernetes-sigs/kind/blob/v0.23.0-alpha/pkg/cluster/internal/kubeconfig/internal/kubeconfig/paths.go
* The sandboxed (App Store) variant relies on a specific temporary
entitlement to access the ~/.kube/config file.
The entitlement is only granted to specific files, and so is not
applicable to paths supplied by the user at runtime.
While there may be other ways to achieve this access to arbitrary
kubeconfig files, it's out of scope for now.
Updates #11645
Signed-off-by: Chloé Vulquin <code@toast.bunkerlabs.net>
After:
bradfitz@book1pro tailscale.com % ./tool/go test -c ./cmd/tailscale/cli
bradfitz@book1pro tailscale.com % ./cli.test
bradfitz@book1pro tailscale.com %
Before:
bradfitz@book1pro tailscale.com % ./tool/go test -c ./cmd/tailscale/cli
bradfitz@book1pro tailscale.com % ./cli.test
Warning: funnel=on for foo.test.ts.net:443, but no serve config
run: `tailscale serve --help` to see how to configure handlers
Warning: funnel=on for foo.test.ts.net:443, but no serve config
run: `tailscale serve --help` to see how to configure handlers
USAGE
funnel <serve-port> {on|off}
funnel status [--json]
Funnel allows you to publish a 'tailscale serve'
server publicly, open to the entire internet.
Turning off Funnel only turns off serving to the internet.
It does not affect serving to your tailnet.
SUBCOMMANDS
status show current serve/funnel status
error: path must be absolute
error: invalid TCP source "localhost:5432": missing port in address
error: invalid TCP source "tcp://somehost:5432"
must be one of: localhost or 127.0.0.1
tcp://somehost:5432error: invalid TCP source "tcp://somehost:0"
must be one of: localhost or 127.0.0.1
tcp://somehost:0error: invalid TCP source "tcp://somehost:65536"
must be one of: localhost or 127.0.0.1
tcp://somehost:65536error: path must be absolute
error: cannot serve web; already serving TCP
You don't have permission to enable this feature.
This also moves the color handling up to a generic spot so it's
not just one subcommand doing it itself. See
https://github.com/tailscale/tailscale/issues/11626#issuecomment-2041795129Fixes#11643
Updates #11626
Change-Id: I3a49e659dcbce491f4a2cb784be20bab53f72303
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
At least in the case of dialing a Tailscale IP.
Updates #4529
Change-Id: I9fd667d088a14aec4a56e23aabc2b1ffddafa3fe
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is primarily for GUIs, so they don't need to remember the most
recently used exit node themselves.
This adds some CLI commands, but they're disabled and behind the WIP
envknob, as we need to consider naming (on/off is ambiguous with
running an exit node, etc) as well as automatic exit node selection in
the future. For now the CLI commands are effectively developer debug
things to test the LocalAPI.
Updates tailscale/corp#18724
Change-Id: I9a32b00e3ffbf5b29bfdcad996a4296b5e37be7e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was used when we only supported subnet routers on linux
and would nil out the SubnetRoutes slice as no other router
worked with it, but now we support subnet routers on ~all platforms.
The field it was setting to nil is now only used for network logging
and nowhere else, so keep the field but drop the SubnetRouterWrapper
as it's not useful.
Updates #cleanup
Change-Id: Id03f9b6ec33e47ad643e7b66e07911945f25db79
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The output was changing randomly per run, due to range over a map.
Then some misc style tweaks I noticed while debugging.
Fixes#11629
Change-Id: I67aef0e68566994e5744d4828002f6eb70810ee1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change switches the api to /drive, rather than the previous /tailfs
as well as updates the log lines to reflect the new value. It also
cleans up some existing tailfs references.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change updates all tailfs functions and the majority of the tailfs
variables to use the new drive naming.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change updates the tailfs file and package names to their new
naming convention.
Updates #tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
* cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster.
Adds a simple nameserver that can respond to A record queries for ts.net DNS names.
It can respond to queries from in-memory records, populated from a ConfigMap
mounted at /config. It dynamically updates its records as the ConfigMap
contents changes.
It will respond with NXDOMAIN to queries for any other record types
(AAAA to be implemented in the future).
It can respond to queries over UDP or TCP. It runs a miekg/dns
DNS server with a single registered handler for ts.net domain names.
Queries for other domain names will be refused.
The intended use of this is:
1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet
services exposed via Tailscale operator egress over HTTPS
2) to allow non-tailnet cluster workloads to talk to workloads in
the same cluster that have been exposed to tailnet over their
MagicDNS names but on their cluster IPs.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator/deploy/crds,k8s-operator: add DNSConfig CustomResource Definition
DNSConfig CRD can be used to configure
the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator: optionally reconcile nameserver resources
Adds a new reconciler that reconciles DNSConfig resources.
If a DNSConfig is deployed to cluster,
the reconciler creates kube nameserver resources.
This reconciler is only responsible for creating
nameserver resources and not for populating nameserver's records.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/{k8s-operator,k8s-nameserver}: generate DNSConfig CRD for charts, append to static manifests
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
---------
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This allows sending multiple files via Taildrop in one request.
Progress is tracked via ipn.Notify.
Updates tailscale/corp#18202
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Including the double quotes (`"`) around the value made it appear like the helm chart should expect a string value for `installCRDs`.
Signed-off-by: Chris Milson-Tokunaga <chris.w.milson@gmail.com>
This implementation uses less memory than tempfork/device,
which helps avoid OOM conditions in the iOS VPN extension when
switching to a Tailnet with ExitNode routing enabled.
Updates tailscale/corp#18514
Signed-off-by: Percy Wegmann <percy@tailscale.com>
First we had Capabilities []string. Then
https://tailscale.com/blog/acl-grants (#4217) brought CapMap, a
superset of Capabilities. Except we never really finished the
transition inside the codebase to go all-in on CapMap. This does so.
Notably, this coverts Capabilities on the wire early to CapMap
internally so the code can only deal in CapMap, even against an old
control server.
In the process, this removes PeerChange.Capabilities support, which no
known control plane sent anyway. They can and should use
PeerChange.CapMap instead.
Updates #11508
Updates #4217
Change-Id: I872074e226b873f9a578d9603897b831d50b25d9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Use the zstdframe package where sensible instead of plumbing
around our own zstd.Encoder just for stateless operations.
This causes logtail to have a dependency on zstd,
but that's arguably okay since zstd support is implicit
to the protocol between a client and the logging service.
Also, virtually every caller to logger.NewLogger was
manually setting up a zstd.Encoder anyways,
meaning that zstd was functionally always a dependency.
Updates #cleanup
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Fix a bug where all proxies got configured with --accept-routes set to true.
The bug was introduced in https://github.com/tailscale/tailscale/pull/11238.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Enable the web client over 100.100.100.100 by default. Accepting traffic
from [tailnet IP]:5252 still requires setting the `webclient` user pref.
Updates https://github.com/tailscale/tailscale/issues/10261
Signed-off-by: Mario Minardi <mario@tailscale.com>
Updates ENG-2848
We can safely disable the App Sandbox for our macsys GUI, allowing us to use `tailscale ssh` and do a few other things that we've wanted to do for a while. This PR:
- allows Tailscale SSH to be used from the macsys GUI binary when called from a CLI
- tweaks the detection of client variants in prop.go, with new functions `IsMacSys()`, `IsMacSysApp()` and `IsMacAppSandboxEnabled()`
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
When a user deletes the last cluster/user/context from their
kubeconfig via 'kubectl delete-[cluster|user|context] command,
kubectx sets the relevant field in kubeconfig to 'null'.
This was breaking our conversion logic that was assuming that the field
is either non-existant or is an array.
Updates tailscale/corp#18320
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
- Updates API to support renaming TailFS shares.
- Adds a CLI rename subcommand for renaming a share.
- Renames the CLI subcommand 'add' to 'set' to make it clear that
this is an add or update.
- Adds a unit test for TailFS in ipnlocal
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Previously, the configuration of which folders to share persisted across
profile changes. Now, it is tied to the user's profile.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
So we can use it in trunkd to quiet down the logs there.
Updates #5563
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie3177dc33f5ad103db832aab5a3e0e4f128f973f
Moving logic that manipulates a ServeConfig into recievers on the
ServeConfig in the ipn package. This is setup work to allow the
web client and cli to both utilize these shared functions to edit
the serve config.
Any logic specific to flag parsing or validation is left untouched
in the cli command. The web client will similarly manage its
validation of user's requested changes. If validation logic becomes
similar-enough, we can make a serve util for shared functionality,
which likely does not make sense in ipn.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
In preparation for changes to allow configuration of serve/funnel
from the web client, this commit moves some functionality that will
be shared between the CLI and web client to the ipn package's
serve.go file, where some other util funcs are already defined.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This allows the Mac application to regain access to restricted
folders after restarts.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This adds a method to wgengine.Engine and plumbed down into magicsock
to add a way to get a type-safe Tailscale-safe wrapper around a
wireguard-go device.Peer that only exposes methods that are safe for
Tailscale to use internally.
It also removes HandshakeAttempts from PeerStatusLite that was just
added as it wasn't needed yet and is now accessible ala cart as needed
from the Peer type accessor.
None of this is used yet.
Updates #7617
Change-Id: I07be0c4e6679883e6eeddf8dbed7394c9e79c5f4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is so that if a backend Service gets created after the Ingress, it gets picked up by the operator.
Updates tailscale/tailscale#11251
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <1687799+knyar@users.noreply.github.com>
Containerboot container created for operator's ingress and egress proxies
are now always configured by passing a configfile to tailscaled
(tailscaled --config <configfile-path>.
It does not run 'tailscale set' or 'tailscale up'.
Upgrading existing setups to this version as well as
downgrading existing setups at this version works.
Updates tailscale/tailscale#10869
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Add logic to autogenerate CRD docs.
.github/workflows/kubemanifests.yaml CI workflow will fail if the doc is out of date with regard to the current CRDs.
Docs can be refreshed by running make kube-generate-all.
Updates tailscale/tailscale#11023
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
When reverse path filtering is in strict mode on Linux, using an exit
node blocks all network connectivity. This change adds a warning about
this to `tailscale status` and the logs.
Example in `tailscale status`:
```
- not connected to home DERP region 22
- The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310
```
Example in the logs:
```
2024/02/21 21:17:07 health("overall"): error: multiple errors:
not in map poll
The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310
```
Updates #3310
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Tailscaled becomes inoperative if the Tailscale Tunnel wintun adapter is abruptly removed.
wireguard-go closes the device in case of a read error, but tailscaled keeps running.
This adds detection of a closed WireGuard device, triggering a graceful shutdown of tailscaled.
It is then restarted by the tailscaled watchdog service process.
Fixes#11222
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Instead of modeling remote WebDAV servers as actual
webdav.FS instances, we now just proxy traffic to them.
This not only simplifies the code, but it also allows
WebDAV locking to work correctly by making sure locks are
handled by the servers that need to (i.e. the ones actually
serving the files).
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
I missed a case in the earlier patch, and so we're still sending 15s TCP
keepalive for TLS connections, now adjusted there too.
Updates tailscale/corp#17587
Updates #3363
Signed-off-by: James Tucker <james@tailscale.com>
This adds details on how to configure node attributes to allow
sharing and accessing shares.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
The derper sends an in-protocol keepalive every 60-65s, so frequent TCP
keepalives are unnecessary. In this tuning TCP keepalives should never
occur for a DERP client connection, as they will send an L7 keepalive
often enough to always reset the TCP keepalive timer. If however a
connection does not receive an ACK promptly it will now be shutdown,
which happens sooner than it would with a normal TCP keepalive tuning.
This re-tuning reduces the frequency of network traffic from derp to
client, reducing battery cost.
Updates tailscale/corp#17587
Updates #3363
Signed-off-by: James Tucker <james@tailscale.com>
So derpers can check an external URL for whether to permit access
to a certain public key.
Updates tailscale/corp#17693
Change-Id: I8594de58f54a08be3e2dbef8bcd1ff9b728ab297
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This allows coverage from tests that hit multiple packages at once
to be reflected in all those packages' coverage.
Updates #cleanup
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Instead of constructing the `ip:port` string ourselves, use
netip.AddrPortFrom which handles IPv6 correctly.
Updates #11164
Signed-off-by: Will Norris <will@tailscale.com>
* cmd/k8s-operator,k8s-operator: introduce proxy configuration mechanism via ProxyClass custom resource.
ProxyClass custom resource can be used to specify customizations
for the proxy resources created by the operator.
Add a reconciler that validates ProxyClass resources
and sets a Ready condition to True or False with a corresponding reason and message.
This is required because some fields (labels and annotations)
require complex validations that cannot be performed at custom resource apply time.
Reconcilers that use the ProxyClass to configure proxy resources are expected to
verify that the ProxyClass is Ready and not proceed with resource creation
if configuration from a ProxyClass that is not yet Ready is required.
If a tailscale ingress/egress Service is annotated with a tailscale.com/proxy-class annotation, look up the corresponding ProxyClass and, if it is Ready, apply the configuration from the ProxyClass to the proxy's StatefulSet.
If a tailscale Ingress has a tailscale.com/proxy-class annotation
and the referenced ProxyClass custom resource is available and Ready,
apply configuration from the ProxyClass to the proxy resources
that will be created for the Ingress.
Add a new .proxyClass field to the Connector spec.
If connector.spec.proxyClass is set to a ProxyClass that is available and Ready,
apply configuration from the ProxyClass to the proxy resources created for the Connector.
Ensure that when Helm chart is packaged, the ProxyClass yaml is added to chart templates. Ensure that static manifest generator adds ProxyClass yaml to operator.yaml. Regenerate operator.yaml
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
As part of #10631, we stopped using function pointers for subcommands,
preventing us from registering platform-specific installSystemDaemon
and uninstallSystemDaemon subcommands.
Fixes#11099
Signed-off-by: Percy Wegmann <percy@tailscale.com>
The new math/rand/v2 package includes an m-local global random number
generator that can not be reseeded by the user, which is suitable for
most uses without the RNG pools we have in a number of areas of the code
base.
The new API still does not have an allocation-free way of performing a
seeded operations, due to the long term compiler bug around interface
parameter escapes, and the Source interface.
This change introduces the two APIs that math/rand/v2 can not yet
replace efficiently: seeded Perm() and Shuffle() operations. This
implementation chooses to use the PCG random source from math/rand/v2,
as with sufficient compiler optimization, this source should boil down
to only two on-stack registers for random state under ideal conditions.
Updates #17243
Signed-off-by: James Tucker <james@tailscale.com>
`os.LookupEnv` may return true if the variable is present in
the environment but an empty string. We should only attempt
to set OAuth Config if thsoe values are non-empty.
Updates gitops-acl-action#33
Signed-off-by: Jenny Zhang <jz@tailscale.com>
Add a WebDAV-based folder sharing mechanism that is exposed to local clients at
100.100.100.100:8080 and to remote peers via a new peerapi endpoint at
/v0/tailfs.
Add the ability to manage folder sharing via the new 'share' CLI sub-command.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This change fixes the format of tailscale status output when location
based exit nodes are present.
Fixes#11065
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Update logs for synology builds to more clearly callout which variant
is being built. The two existing variants are:
1. Sideloaded (can be manual installed on a device by anyone)
2. Package center distribution (by the tailscale team)
Updates #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The new read-only mode is only accessible when running `tailscale web`
by passing a new `-readonly` flag. This new mode is identical to the
existing login mode with two exceptions:
- the management client in tailscaled is not started (though if it is
already running, it is left alone)
- the client does not prompt the user to login or switch to the
management client. Instead, a message is shown instructing the user
to use other means to manage the device.
Updates #10979
Signed-off-by: Will Norris <will@tailscale.com>
* cmd/containerboot,cmd/k8s-operator/deploy/manifests: optionally forward cluster traffic via ingress proxy.
If a tailscale Ingress has tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation, configure the associated ingress proxy to have its tailscale serve proxy to listen on Pod's IP address. This ensures that cluster traffic too can be forwarded via this proxy to the ingress backend(s).
In containerboot, if EXPERIMENTAL_PROXY_CLUSTER_TRAFFIC_VIA_INGRESS is set to true
and the node is Kubernetes operator ingress proxy configured via Ingress,
make sure that traffic from within the cluster can be proxied to the ingress target.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
gitops-pusher supports authenticating with an API key or OAuth
credentials (added in #7393). You shouldn't ever use both of those
together, so we error if both are set.
In tailscale/gitops-acl-action#24, OAuth support is being added to the
GitHub action. In that environment, both the TS_API_KEY and OAuth
variables will be set, even if they are empty values. This causes an
error in gitops-pusher which expects only one to be set.
Update gitops-pusher to check that only one set of environment variables
are non-empty, rather than just checking if they are set.
Updates #7393
Signed-off-by: Will Norris <will@tailscale.com>
When running as non-root non-operator user, you get this error:
```
$ tailscale serve 8080
Access denied: watch IPN bus access denied, must set ipn.NotifyNoPrivateKeys when not running as admin/root or operator
Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root.
```
It should fail, but the error message is confusing.
With this fix:
```
$ tailscale serve 8080
sending serve config: Access denied: serve config denied
Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root.
```
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Do not provision resources for a tailscale Ingress that has no valid backends.
Updates tailscale/tailscale#10910
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Plan9 CI is disabled. 3p dependencies do not build for the target.
Contributor enthusiasm appears to have ceased again, and no usage has
been made.
Skipped gvisor, nfpm, and k8s.
Updates #5794
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
When tailscaled is run with "-debug 127.0.0.1:12345", these metrics are
available at:
http://localhost:12345/debug/metrics
Updates #8210
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I19db6c445ac1f8344df2bc1066a3d9c9030606f8
If there are routes changes as a side effect of an app connector
configuration update, the connector configuration may want to reenter a
lock, so must be started asynchronously.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
This is a useful primitive for asynchronous execution of ordered work I
want to use in another change.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
Also perform minor cleanups on the ctxkey package itself.
Provide guidance on when to use ctxkey.Key[T] over ctxkey.New.
Also, allow for interface kinds because the value wrapping trick
also happens to fix edge cases with interfaces in Go.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
To reduce the likelihood of breaking users,
if we implement stricter Exact path type matching in the future.
Updates tailscale/tailscale#10730
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
So that users have predictable label values to use when configuring network policies.
Updates tailscale/tailscale#10854
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator/deploy: deploy a Tailscale IngressClass resource.
Some Ingress validating webhooks reject Ingresses with
.spec.ingressClassName for which there is no matching IngressClass.
Additionally, validate that the expected IngressClass is present,
when parsing a tailscale `Ingress`.
We currently do not utilize the IngressClass,
however we might in the future at which point
we might start requiring that the right class
for this controller instance actually exists.
Updates tailscale/tailscale#10820
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
This change adds a description to the exit-node CLI command. This
description will be displayed when using `tailscale -h` and `tailscale
exit-node -h`.
Fixes#10787
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
The configuration knob (that defaulted to Connector being disabled)
was added largely because the Connector CRD had to be installed in a separate step.
Now when the CRD has been added to both chart and static manifest, we can have it on by default.
Updates tailscale/tailscale#10878
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: fix base truncating for extra long Service names
StatefulSet names for ingress/egress proxies are calculated
using Kubernetes name generator and the parent resource name
as a base.
The name generator also cuts the base, but has a higher max cap.
This commit fixes a bug where, if we get a shortened base back
from the generator, we cut off too little as the base that we
have cut will be passed into the generator again, which will
then itself cut less because the base is shorter- so we end up
with a too long name again.
Updates tailscale/tailscale#10807
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Irbe Krumina <irbekrm@gmail.com>
cmd/k8s-operator: add CRD to chart and static manifest
Add functionality to insert CRD to chart at package time.
Insert CRD to static manifests as this is where they are currently consumed from.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Prints a helpful message with the web UI's address when running
tailscale set --webclient.
Updates tailscale/corp#16345
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Removes the avoidFinalRename logic and all associated code as it is no longer required by the Apple clients.
Enables resume logic to be usable for Apple clients.
Fixestailscale/corp#14772
Signed-off-by: Rhea Ghosh <rhea@tailscale.com>
The prefix has space for 32-bit site IDs, but the validateViaPrefix
function would previously have disallowed site IDs greater than 255.
Fixestailscale/corp#16470
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4cdb0711dafb577fae72d86c4014cf623fa538ef
cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR.
Make it possible to define an exit node to be deployed to a Kubernetes cluster
via Connector Custom resource.
Also changes to Connector API so that one Connector corresponds
to one Tailnet node that can be either a subnet router or an exit
node or both.
The Kubernetes operator parses Connector custom resource and,
if .spec.isExitNode is set, configures that Tailscale node deployed
for that connector as an exit node.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Add a standalone server for STUN that can be hosted independently of the
derper, and factor that back into the derper.
Fixes#8434Closes#8435Closes#10745
Signed-off-by: James Tucker <james@tailscale.com>
* cmd/containerboot: optionally configure tailscaled with a configfile.
If EXPERIMENTAL_TS_CONFIGFILE_PATH env var is set,
only run tailscaled with the provided config file.
Do not run 'tailscale up' or 'tailscale set'.
* cmd/containerboot: store containerboot accept_dns val in bool pointer
So that we can distinguish between the value being set to
false explicitly bs being unset.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Unlike most prefs, the ControlURL policy needs to take effect before
login. This resolves an issue where on first start, even when the
ControlURL policy is set, it will generate a login URL to the Tailscale
SaaS server.
Updates tailscale/coral#118
Fixes#10736
Change-Id: I6da2a521f64028c15dbb6ac8175839fc3cc4e858
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This command allows observing whether a given dialer ("SystemDial",
"UserDial", etc.) will successfully obtain a connection to a provided
host, from inside tailscaled itself. This is intended to help debug a
variety of issues from subnet routers to split DNS setups.
Updates #9619
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie01ebb5469d3e287eac633ff656783960f697b84
This tripped me up when I was testing something and wrote:
if conn != nil {
conn.Close()
}
In netstack mode, when an error occurred we were getting a non-nil error
and a non-nil interface that contained a nil pointer. Instead, just
return a nil interface value.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Id9ef3dd24529e0e8c53adc60ed914c31fbb10cc4
A Tailnet node can be told to stop advertise subnets by passing
an empty string to --advertise-routes flag.
Respect an explicitly passed empty value to TS_ROUTES env var
so that users have a way to stop containerboot acting as a subnet
router without recreating it.
Distinguish between TS_ROUTES being unset and empty.
Updates tailscale/tailscale#10708
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The service is only used as a watchdog and for piping logs from the child
process. We shouldn't be creating a network monitor in that case.
Fixes#10732
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
The cmpx.Compare function (and associated interface) are now available
in the standard library as cmp.Compare. Remove our version of it and use
the version from the standard library.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4be3ac63d466c05eb7a0babb25cb0d41816fbd53
When auto-update setting in local Prefs is unset, apply the tailnet
default value from control. This only happens once, when we apply the
default (or when the user manually overrides it), tailnet default no
longer affects the node.
Updates #16244
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Instead of taking the first UPnP response we receive and using that to
create port mappings, store all received UPnP responses, sort and
deduplicate them, and then try all of them to obtain an external
address.
Updates #10602
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I783ccb1834834ee2a9ecbae2b16d801f2354302f
connector-gen can initially generate connector ACL snippets and
advertise-routes flags for Github and AWS based on their public IP /
domain data.
Updates ENG-2425
Signed-off-by: James Tucker <james@tailscale.com>
* k8s-operator,cmd/k8s-operator,Makefile,scripts,.github/workflows: add Connector kube CRD.
Connector CRD allows users to configure the Tailscale Kubernetes operator
to deploy a subnet router to expose cluster CIDRs or
other CIDRs available from within the cluster
to their tailnet.
Also adds various CRD related machinery to
generate CRD YAML, deep copy implementations etc.
Engineers will now have to run
'make kube-generate-all` after changing kube files
to ensure that all generated files are up to date.
* cmd/k8s-operator,k8s-operator: reconcile Connector resources
Reconcile Connector resources, create/delete subnetrouter resources in response to changes to Connector(s).
Connector reconciler will not be started unless
ENABLE_CONNECTOR env var is set to true.
This means that users who don't want to use the alpha
Connector custom resource don't have to install the Connector
CRD to their cluster.
For users who do want to use it the flow is:
- install the CRD
- install the operator (via Helm chart or using static manifests).
For Helm users set .values.enableConnector to true, for static
manifest users, set ENABLE_CONNECTOR to true in the static manifest.
Updates tailscale/tailscale#502
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This uses the fact that we've received a frame from a given DERP region
within a certain time as a signal that the region is stil present (and
thus can still be a node's PreferredDERP / home region) even if we don't
get a STUN response from that region during a netcheck.
This should help avoid DERP flaps that occur due to losing STUN probes
while still having a valid and active TCP connection to the DERP server.
RELNOTE=Reduce home DERP flapping when there's still an active connection
Updates #8603
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If7da6312581e1d434d5c0811697319c621e187a0
Initial implementation of a `tailscale whois` subcommand
which allows users to observe metadata associated with a
Tailscale IP. It also has a `--json` flag to allow consumption
programmatically.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously were always setting `UseSocketOnly` because we were
comparing `args.socketpath != ""`, but `args.socketpath` flag
always gets filled with `paths.DefaultTailscaledSocket()` when
not provided. Rather than comparing to the empty string, compare
to the default value to determine if `UseSocketOnly` should be
set.
Should fix issue with web client being unreachable for Mac App
Store variant of the mac build.
Updates #16054
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Instead of overloading the Version field, add an explicit Track field.
This fixes a bug where passing a track name in `args.Version` would keep
the track name in `updater.Version` and pass it down the code path to
commands like `apt-get install`. Now, `updater.Version` should always be
a version (or empty string).
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
`tailscaled` and `tailscale` expect the socket to be at
`/var/run/tailscale/tailscaled.sock`, however containerboot
would set up the socket at `/tmp/tailscaled.sock`. This leads to a
poor UX when users try to use any `tailscale` command as they
have to prefix everything with `--socket /tmp/tailscaled.sock`.
To improve the UX, this adds a symlink to
`/var/run/tailscale/tailscaled.sock` to point to `/tmp/tailscaled.sock`.
This approach has two benefits, 1 users are able to continue to use
existing scripts without this being a breaking change. 2. users are
able to use the `tailscale` CLI without having to add the `--socket` flag.
Fixes tailscale/corp#15902
Fixes#6849Fixes#10027
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Some fields if `ipn.Prefs` are structs. `ipn.MaskedPrefs` has a single
level of boolean `*Set` flags, which doesn't map well to nested structs
within `ipn.Prefs`.
Change `MaskedPrefs` and `ApplyEdits` to support `FooSet` struct fields
that map to a nested struct of `ipn.Prefs` like `AutoUpdates`. Each
struct field in `MaskedPrefs` is just a bundle of more `Set` bool fields
or other structs. This allows you to have a `Set` flag for any
arbitrarily-nested field of `ipn.Prefs`.
Also, make `ApplyEdits` match fields between `Prefs` and `MaskedPrefs`
by name instead of order, to make it a bit less finicky. It's probably
slower but `ipn.ApplyEdits` should not be in any hot path.
As a result, `AutoUpdate.Check` and `AutoUpdate.Apply` fields don't
clobber each other when set individually.
Updates #16247
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Precompress webclient assets with precompress util. This cuts our
css and js build sizes to about 1/3 of non-compressed size. Similar
compression done on tsconnect and adminhttp assets.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
* cmd/k8s-operator: generate static manifests from Helm charts
This is done to ensure that there is a single source of truth
for the operator kube manifests.
Also adds linux node selector to the static manifests as
this was added as a default to the Helm chart.
Static manifests can now be generated by running
`go generate tailscale.com/cmd/k8s-operator`.
Updates tailscale/tailscale#9222
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The recent addition of RequestID was only populated if the
HTTP Request had returned an error. This meant that the underlying
handler has no access to this request id and any logs it may have
emitted were impossible to correlate to that request id. Therefore,
this PR adds a middleware to generate request ids and pass them
through the request context. The tsweb.StdHandler automatically
populates this request id if the middleware is being used. Finally,
inner handlers can use the context to retrieve that same request id
and use it so that all logs and events can be correlated.
Updates #2549
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Adds policy keys ExitNodeID and ExitNodeIP.
Uses the policy keys to determine the exit node in preferences.
Fixestailscale/corp#15683
Signed-off-by: Claire Wang <claire@tailscale.com>
To be consistent with the formatting of other warnings, pass available
update health message instead of handling ClientVersion in he CLI.
Fixes#10312
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Enforcing inclusion of our OSS license at the top of .ts and .tsx
files. Also updates any relevant files in the repo that were
previously missing the license comment. An additional `@license`
comment is added to client/web/src/index.tsx to preserve the
license in generated Javascript.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
We warn users about IP forwarding being disabled when using
`--avertise-routes` in `tailscale up`, this adds the same warnings
to `tailscale set`.
Updates tailscale/corp#9968
Signed-off-by: Jenny Zhang <jz@tailscale.com>
* cmd/containerboot: proxy traffic to tailnet target defined by FQDN
Add a new Service annotation tailscale.com/tailnet-fqdn that
users can use to specify a tailnet target for which
an egress proxy should be deployed in the cluster.
Updates tailscale/tailscale#10280
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This records test coverage for the amd64 no race tests and uploads the
results to coveralls.io.
Updates #cleanup
Signed-off-by: Ox Cart <ox.to.a.cart@gmail.com>
Kubernetes can generate StatefulSet names that are too long and result in invalid Pod revision hash label values.
Calculate whether a StatefulSet name generated for a Service or Ingress
will be too long and if so, truncate it.
Updates tailscale/tailscale#10284
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
It's possible to do this with a combination of watch-ipn and jq, but looking
at the netmap while debugging is quite common, so it's nice to have a one-shot
command to get it.
Updates #cleanup
Signed-off-by: David Anderson <danderson@tailscale.com>
jq doens't like non-json output in the json stream, and works more happily
when the input stream EOFs at some point. Move non-json words to stderr, and
add a parameter to stop watching and exit after some number of objects.
Updates #cleanup
Signed-off-by: David Anderson <danderson@tailscale.com>
This PR starts to persist the NetMap tailnet name in SetPrefs so that tailscaled
clients can use this value to disambiguate fast user switching from one tailnet
to another that are under the same exact login. We will also try to backfill
this information during backend starts and profile switches so that users don't
have to re-authenticate their profile. The first client to use this new
information is the CLI in 'tailscale switch -list' which now uses text/tabwriter
to display the ID, Tailnet, and Account. Since account names are ambiguous, we
allow the user to pass 'tailscale switch ID' to specify the exact tailnet they
want to switch to.
Updates #9286
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
* cmd/containerboot: shut down cleanly on SIGTERM
Make sure that tailscaled watcher returns when
SIGTERM is received and also that it shuts down
before tailscaled exits.
Updates tailscale/tailscale#10090
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
In DERP homeless mode, a DERP home connection is not sought or
maintained and the local node is not reachable.
Updates #3363
Updates tailscale/corp#396
Change-Id: Ibc30488ac2e3cfe4810733b96c2c9f10a51b8331
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now that we have nftable support this works fine and force
it on gokrazy since 25a8daf405.
Updates gokrazy/gokrazy#209
Signed-off-by: Maisem Ali <maisem@tailscale.com>
No longer using this! Readonly state fully managed via auth endpoint.
Also getting rid of old Legacy server mode.
A #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
For consistency with the "WebClient" naming of the other functions
here. Also fixed a doc typo.
A #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This PR changes the internal getTokenInfo function to use generics.
I also removed our own implementations for obtaining a token's user
and primary group in favour of calling the ones now available in
x/sys/windows.
Furthermore, I added two new functions for working with tokens, logon
session IDs, and Terminal Services / RDP session IDs.
I modified our privilege enabling code to allow enabling of multiple
privileges via one single function call.
Finally, I added the ProcessImageName function and updated the code in
tailscaled_windows.go to use that instead of directly calling the
underlying API.
All of these changes will be utilized by subsequent PRs pertaining to
this issue.
Updates https://github.com/tailscale/corp/issues/13998
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Now that 1.54 has released, and the new web client will be included in
1.56, we can remove the need for the node capability. This means that
all 1.55 unstable builds, and then eventually the 1.56 build, will work
without setting the node capability.
The web client still requires the "webclient" user pref, so this does
NOT mean that the web client will be on by default for all devices.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
This removes the dev/unstable build check for the --webclient flag on
`tailscale set`, so that it will be included in the next major stable
release (1.56)
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
This prevents running more than one recursive resolution for the same
hostname in parallel, which can use excessive amounts of CPU when called
in a tight loop. Additionally, add tests that hit the network (when
run with a flag) to test the lookup behaviour.
Updates tailscale/corp#15261
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I39351e1d2a8782dd4c52cb04b3bd982eb651c81e
Causing issues building a stable release. Getting rid of the flag
for now because it was only available in unstable, can still be
turned on through localapi.
A #cleanup
Co-authored-by: Will Norris <will@tailscale.com>
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
`winutil.WTSGetActiveConsoleSessionId` only works for physical desktop
logins and does not return the session ID for RDP logins. We need to
`windows.WTSEnumerateSessions` and find the active session.
Fixes https://github.com/tailscale/corp/issues/15772
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
On unix systems, the check involves executing sudo, which is slow.
Instead of doing it for every incoming request, move the logic into
localapi serveServeConfig handler and do it as needed.
Updates tailscale/corp#15405
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This package is a wrapper for os/user that handles non-cgo builds,
gokrazy and user shells.
Updates tailscale/corp#15405
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
If the status request to check for the preview node cap fails,
continue with starting up the legacy client.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
After running `tailscale web`, only disable the user pref if it was not
already previously set.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Avoids the need to pipe a web client dev flag through the tailscaled
command.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds a new Mode to the web server, indicating the specific
scenario the constructed server is intended to be run in. Also
starts filling this from the cli/web and ipn/ipnlocal callers.
From cli/web this gets filled conditionally based on whether the
preview web client node cap is set. If not set, the existing
"legacy" client is served. If set, both a login/lobby and full
management client are started (in "login" and "manage" modes
respectively).
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The design changed during integration and testing, resulting in the
earlier implementation growing in the appc package to be intended now
only for the sniproxy implementation. That code is moved to it's final
location, and the current App Connector code is now renamed.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
In corp PR #14970 I updated the installer to set a security mitigation that
always forces system32 to the front of the Windows dynamic linker's search
path.
Unfortunately there are other products out there that, partying like it's
1995, drop their own, older version of wintun.dll into system32. Since we
look there first, we end up loading that old version.
We can fix this by preloading wintun using a fully-qualified path. When
wintun-go then loads wintun, the dynamic linker will hand it the module
that was previously loaded by us.
Fixes#10023, #10025, #10052
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Updates tailscale/tailscale#9222
plain k8s-operator should have hostinfo.App set to 'k8s-operator', operator with proxy should have it set to 'k8s-operator-proxy'. In proxy mode, we were setting the type after it had already been set to 'k8s-operator'
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The AppConnector is now configured by the mapcap from the control plane.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
An EmbeddedAppConnector is added that when configured observes DNS
responses from the PeerAPI. If a response is found matching a configured
domain, routes are advertised when necessary.
The wiring from a configuration in the netmap capmap is not yet done, so
while the connector can be enabled, no domains can yet be added.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
API v1 is compatible with helm v2 and v2 is not.
However, helm v2 (the Tiller deployment mechanism) was deprecated in 2020
and no-one should be using it anymore.
This PR also adds a CI lint test for helm chart
Updates tailscale/tailscale#9222
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The derphttp client automatically reconnects upon failure.
RunWatchConnectionLoop called derphttp.Client.WatchConnectionChanges
once, but that wrapper method called the underlying
derp.Client.WatchConnectionChanges exactly once on derphttp.Client's
currently active connection. If there's a failure, we need to re-subscribe
upon all reconnections.
This removes the derphttp.Client.WatchConnectionChanges method, which
was basically impossible to use correctly, and changes it to be a
boolean field on derphttp.Client alongside MeshKey and IsProber. Then
it moves the call to the underlying derp.Client.WatchConnectionChanges
to derphttp's client connection code, so it's resubscribed on any
reconnect.
Some paranoia is then added to make sure people hold the API right,
not calling derphttp.Client.RunWatchConnectionLoop on an
already-started Client without having set the bool to true. (But still
auto-setting it to true if that's the first method that's been called
on that derphttp.Client, as is commonly the case, and prevents
existing code from breaking)
Fixestailscale/corp#9916
Supercedes tailscale/tailscale#9719
Co-authored-by: Val <valerie@tailscale.com>
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Signed-off-by: Brad Fitzpatrick <brad@danga.com>
* Implement missing tests for sniproxy
* Wire sniproxy to new appc package
* Add support to tsnet for routing subnet router traffic into netstack, so it can be handled
Updates: https://github.com/tailscale/corp/issues/15038
Signed-off-by: Tom DNetto <tom@tailscale.com>
This is not currently exposed as a user-settable preference through
`tailscale up` or `tailscale set`. Instead, the preference is set when
turning the web client on and off via localapi. In a subsequent commit,
the pref will be used to automatically start the web client on startup
when appropriate.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Allows for serving the web interface from tailscaled, with the
ability to start and stop the server via localapi endpoints
(/web/start and /web/stop).
This will be used to run the new full management web client,
which will only be accessible over Tailscale (with an extra auth
check step over noise) from the daemon. This switch also allows
us to run the web interface as a long-lived service in environments
where the CLI version is restricted to CGI, allowing us to manage
certain auth state in memory.
ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for
ios builds to satisfy ios restriction from adding "text/template"
and "html/template" dependencies.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
We were inconsistent whether we checked if the feature was already
enabled which we could do cheaply using the locally available status.
We would do the checks fine if we were turning on funnel, but not serve.
This moves the cap checks down into enableFeatureInteractive so that
are always run.
Updates #9984
Co-authored-by: Tyler Smalley <tyler@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
On Windows, the idiomatic way to check access on a named pipe is for
the server to impersonate the client on its current OS thread, perform
access checks using the client's access token, and then revert the OS
thread's access token back to its true self.
The access token is a better representation of the client's rights than just
a username/userid check, as it represents the client's effective rights
at connection time, which might differ from their normal rights.
This patch updates safesocket to do the aforementioned impersonation,
extract the token handle, and then revert the impersonation. We retain
the token handle for the remaining duration of the connection (the token
continues to be valid even after we have reverted back to self).
Since the token is a property of the connection, I changed ipnauth to wrap
the concrete net.Conn to include the token. I then plumbed that change
through ipnlocal, ipnserver, and localapi as necessary.
I also added a PermitLocalAdmin flag to the localapi Handler which I intend
to use for controlling access to a few new localapi endpoints intended
for configuring auto-update.
Updates https://github.com/tailscale/tailscale/issues/755
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
We prevent shodow configs when starting a foreground when a background serve config already exists for the serve type and port. This PR improves the messaging to let the user know how to remove the previous config.
Updates #8489
ENG-2314
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
The `--http` flag can not be used with Funnel, so we should remove it to remove confusion.
Updates #8489
ENG-2316
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
This PR changes the -https, -http, -tcp, and -tls-terminated-tcp
flags from string to int and also updates the validation to ensure
they fit the uint16 size as the flag library does not have a Uint16Var
method.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
The TestServeDevConfigMutations test has 63 steps that all run
under the same scope. This tests breaks them out into isolated
subtests that can be run independently.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
We currently print out "run tailscale serve --help" when the subcmd
might be funnel. This PR ensures the right subcmd is passed.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
On `tailscale set --auto-update`, set the Sparkle plist option for it.
Also make macsys report not supporting auto-updates over c2n, since they
will be triggered by Sparkle locally.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
A few people have run into issues with understanding why `--set-path` started in background mode, and/or why they couldn't use a path in foreground mode. This change allows `--set-path` to be used in either case (foreground or background).
updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
clientupdate.Updater will have a non-nil Update func in a few cases
where it doesn't actually perform an update:
* on Arch-like distros, where it prints instructions on how to update
* on macOS app store version, where it opens the app store page
Add a new clientupdate.Arguments field to cause NewUpdater to fail when
we hit one of these cases. This results in c2n updates being "not
supported" and `tailscale set --auto-update` returning an error.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* Fixes issue with template string not being provided in help text
* Updates background information to provide full URL, including path, to make it clear the source and destination
* Restores some tests
* Removes AllowFunnel in ServeConfig if no proxy exists for that port.
updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
This PR adds the same set-raw from the old flow into the new one
so that users can continue to use it when transitioning into the new
flow.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR fixes the isLegacyInvocation to better catch serve and
funnel legacy commands. In addition, it now also returns a string
that translates the old command into the new one so that users
can have an easier transition story.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR allows you to do "tailscale serve -bg -https:4545 off" and it
will delete all handlers under it. It will also prompt you for a y/n in case
you wanted to delete a single port.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Users should delete proxies by deleting or modifying the k8s cluster resources
that they used to tell the operator to create they proxy. With this flow,
the tailscale operator will delete the associated device from the control.
However, in some cases users might have already deleted the device from the control manually.
Updates tailscale/tailscale#9773
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Andrew Lytvynov