tailscale

Commit Graph

Author	SHA1	Message	Date
Mihai Parparita	a9f32656f5	control/controlhttp: allow client and server to communicate over WebSockets We can't do Noise-over-HTTP in Wasm/JS (because we don't have bidirectional communication), but we should be able to do it over WebSockets. Reuses derp WebSocket support that allows us to turn a WebSocket connection into a net.Conn. Updates #3157 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Maisem Ali	80157f3f37	net/dns/resolver: add support for <IPv4>.via-<site-id> Currently we only support "via-<site-id>.<IPv4>", however that does not work with Google Chrome which parses `http://via-1.10.0.0.1` as a search string and not as a URL. This commit introduces "<IPv4>.via-<site-id>" (`http://10.0.0.1.via-1`) which is parsed correctly by Chrome. Updates #3616 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	1336fb740b	wgengine/netstack: make netstack MTU be 1280 also Updates #3878 Change-Id: I1850085b32c8a40d85607b4ad433622c97d96a8d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Aaron Klotz	b005b79236	net/dns, paths, util/winutil: change net/dns/windowsManager NRPT management to support more than 50 domains. AFAICT this isn't documented on MSDN, but based on the issue referenced below, NRPT rules are not working when a rule specifies > 50 domains. This patch modifies our NRPT rule generator to split the list of domains into chunks as necessary, and write a separate rule for each chunk. For compatibility reasons, we continue to use the hard-coded rule ID, but as additional rules are required, we generate new GUIDs. Those GUIDs are stored under the Tailscale registry path so that we know which rules are ours. I made some changes to winutils to add additional helper functions in support of both the code and its test: I added additional registry accessors, and also moved some token accessors from paths to util/winutil. Fixes https://github.com/tailscale/coral/issues/63 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
Tom	acfe5bd33b	net/dns{., resolver}: time out DNS queries after 10 seconds (#4690 ) Fixes https://github.com/tailscale/corp/issues/5198 The upstream forwarder will block indefinitely on `udpconn.ReadFrom` if no reply is recieved, due to the lack of deadline on the connection object. There still isn't a deadline on the connection object, but the automatic closing of the context on deadline expiry will close the connection via `closeOnCtxDone`, unblocking the read and resulting in a normal teardown. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Mihai Parparita	86069874c9	net/tstun, wgengine: use correct type for counter metrics We were marking them as gauges, but they are only ever incremented, thus counter is more appropriate. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Maisem Ali	fd99c54e10	tailcfg,all: change structs to []*dnstype.Resolver Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Tom	d1d6ab068e	net/dns, wgengine: implement DNS over TCP (#4598 ) * net/dns, wgengine: implement DNS over TCP Signed-off-by: Tom DNetto <tom@tailscale.com> * wgengine/netstack: intercept only relevant port/protocols to quad-100 Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
James Tucker	f9e86e64b7	*: use WireGuard where logged, printed or named Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	ae483d3446	wgengine, net/packet, cmd/tailscale: add ICMP echo Updates tailscale/corp#754 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Tom DNetto	2a0b5c21d2	net/dns/{., resolver}, wgengine: fix goroutine leak on shutdown Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	7f45734663	assorted: documentation and readability fixes This were intended to be pushed to #4408, but in my excitement I forgot to git push :/ better late than never. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	9e77660931	net/tstun,wgengine/{.,netstack}: handle UDP magicDNS traffic in netstack This change wires netstack with a hook for traffic coming from the host into the tun, allowing interception and handling of traffic to quad-100. With this hook wired, magicDNS queries over UDP are now handled within netstack. The existing logic in wgengine to handle magicDNS remains for now, but its hook operates after the netstack hook so the netstack implementation takes precedence. This is done in case we need to support platforms with netstack longer than expected. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	dc71d3559f	net/tstun,wgengine: split PreFilterOut into multiple hooks A subsequent commit implements handling of magicDNS traffic via netstack. Implementing this requires a hook for traffic originating from the host and hitting the tun, so we make another hook to support this. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	5b85f848dd	net/dns,net/dns/resolver: refactor channels/magicDNS out of Resolver Moves magicDNS-specific handling out of Resolver & into dns.Manager. This greatly simplifies the Resolver to solely issuing queries and returning responses, without channels. Enforcement of max number of in-flight magicDNS queries, assembly of synthetic UDP datagrams, and integration with wgengine for recieving/responding to magicDNS traffic is now entirely in Manager. This path is being kept around, but ultimately aims to be deleted and replaced with a netstack-based path. This commit is part of a series to implement magicDNS using netstack. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Brad Fitzpatrick	6bed781259	all: gofmt all Well, goimports actually (which adds the normal import grouping order we do) Change-Id: I0ce1b1c03185f3741aad67c14a7ec91a838de389 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
James Tucker	96fec4b969	net/tshttpproxy: synology: pick proxy by scheme This updates the fix from #4562 to pick the proxy based on the request scheme. Updates #4395, #2605, #4562 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Maisem Ali	eff6a404a6	net/tshttpproxy: use http as the scheme for proxies Currently we try to use `https://` when we see `https_host`, however that doesn't work and results in errors like `Received error: fetch control key: Get "https://controlplane.tailscale.com/key?v=32": proxyconnect tcp: tls: first record does not look like a TLS handshake` This indiciates that we are trying to do a HTTPS request to a HTTP server. Googling suggests that the standard is to use `http` regardless of `https` or `http` proxy Updates #4395, #2605 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	5a1ef1bbb9	net/tsdial: add SystemDial as a wrapper on netns.Dial The connections returned from SystemDial are automatically closed when there is a major link change. Also plumb through the dialer to the noise client so that connections are auto-reset when moving from cellular to WiFi etc. Updates #3363 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	c6c752cf64	net/tshttpproxy: fix typo Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Tom DNetto	5fb8e01a8b	net/dns/resolver: add metric for number of truncated dns packets Updates #2067 This should help us determine if more robust control of edns parameters + implementing answer truncation is warranted, given its likely complexity. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Brad Fitzpatrick	e97209c6bf	net/dns: add tailscaled-on-macOS DNS OSConfigurator This populates DNS suffixes ("ts.net", etc) in /etc/resolver/* files to point to 100.100.100.100 so MagicDNS works. It also sets search domains. Updates #4276 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Tom DNetto	78fededaa5	net/dns/resolver: support magic resolution of via-<siteid>.<ip4> domains Updates #3616 Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
James Tucker	700bd37730	tshttpproxy: support synology proxy configuration Fixes #4395 Fixes #2605 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Tom DNetto	df26c63793	net/dns/resolver, net/tsaddr: fix reverse lookups in 4to6 IP range Fixes #4439 Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Brad Fitzpatrick	d413850bd7	cmd/tailscale: add "debug via" subcommand to do CIDR math for via ranges $ tailscale debug via 0xb 10.2.0.0/16 fd7a:115c:a1e0:b1a:0🅱️a02:0/112 $ tailscale debug via fd7a:115c:a1e0:b1a:0🅱️a02:0/112 site 11 (0xb), 10.2.0.0/16 Previously: `3ae701f0eb` This adds a little debug tool to do CIDR math to make converting between those ranges easier for now. Updates #3616 Change-Id: I98302e95d17765bfaced3ecbb71cbd43e84bff46 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Tom DNetto	c8f4dfc8c0	derp/derphttp,net/netcheck: improve netcheck behavior under MITM proxies In cases where tailscale is operating behind a MITM proxy, we need to consider that a lot more of the internals of our HTTP requests are visible and may be used as part of authorization checks. As such, we need to 'behave' as closely as possible to ideal. - Some proxies do authorization or consistency checks based the on Host header or HTTP URI, instead of just the IP/hostname/SNI. As such, we need to construct a `*http.Request` with a valid URI everytime HTTP is going to be used on the wire, even if its over TLS. Aside from the singular instance in net/netcheck, I couldn't find anywhere else a http.Request was constructed incorrectly. - Some proxies may deny requests, typically by returning a 403 status code. We should not consider these requests as a valid latency check, so netcheck semantics have been updated to consider >299 status codes as a failed probe. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Brad Fitzpatrick	cc575fe4d6	net/dns: schedule DoH upgrade explicitly, fix Resolver.Addr confusion Two changes in one: * make DoH upgrades an explicitly scheduled send earlier, when we come up with the resolvers-and-delay send plan. Previously we were getting e.g. four Google DNS IPs and then spreading them out in time (for back when we only did UDP) but then later we added DoH upgrading at the UDP packet layer, which resulted in sometimes multiple DoH queries to the same provider running (each doing happy eyeballs dialing to 4x IPs themselves) for each of the 4 source IPs. Instead, take those 4 Google/Cloudflare IPs and schedule 5 things: first the DoH query (which can use all 4 IPs), and then each of the 4 IPs as UDP later. * clean up the dnstype.Resolver.Addr confusion; half the code was using it as an IP string (as documented) as half was using it as an IP:port (from some prior type we used), primarily for tests. Instead, document it was being primarily an IP string but also accepting an IP:port for tests, then add an accessor method on it to get the IPPort and use that consistently everywhere. Change-Id: Ifdd72b9e45433a5b9c029194d50db2b9f9217b53 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e3a4952527	net/dns/resolver: count errors when racing DNS queries, fail earlier If all N queries failed, we waited until context timeout (in 5 seconds) to return. This makes (*forwarder).forward fail fast when the network's unavailable. Change-Id: Ibbb3efea7ed34acd3f3b29b5fee00ba8c7492569 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d9efbd97cb	net/dns: remove an unused function Change-Id: I7c920c76223ffac37954ef2a18754afc52177598 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ecea6cb994	net/dns/resolver: make DoH dialer use existing dnscache happy eyeball dialer Simplify the ability to reason about the DoH dialing code by reusing the dnscache's dialer we already have. Also, reduce the scope of the "ip" variable we don't want to close over. This necessarily adds a new field to dnscache.Resolver: SingleHostStaticResult, for when the caller already knows the IPs to be returned. Change-Id: I9f2aef7926f649137a5a3e63eebad6a3fffa48c0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f4f76eb275	net/dnsfallback: update from 'go generate' Change-Id: I93e0e6d9a4a471953c1ffef07f32605c5724aed8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
phirework	52d32c94d8	net/dns/publicdns: add missing call to sync.Once.Do (#4410 ) Signed-off-by: Jenny Zhang <jz@tailscale.com>	3 years ago
phirework	83c734a6e0	net/dns, util/publicdns: extract public DNS mapping into own package (#4405 ) This extracts DOH mapping of known public DNS providers in forwarder.go into its own package, to be consumed by other repos Signed-off-by: Jenny Zhang <jz@tailscale.com>	3 years ago
Brad Fitzpatrick	a49d8d5200	Revert ".github/workflows: work around golang/go#51629" This reverts commit `2a412ac9ee`. Updates #4194 Change-Id: I0098b66b71d20bea301ca79058c1cdd201237dd0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	3ae701f0eb	net/tsaddr, wgengine/netstack: add IPv6 range that forwards to site-relative IPv4 This defines a new magic IPv6 prefix, fd7a:115c:a1e0:b1a::/64, a subset of our existing /48, where the final 32 bits are an IPv4 address, and the middle 32 bits are a user-chosen "site ID". (which must currently be 0000:00xx; the top 3 bytes must be zero for now) e.g., I can say my home LAN's "site ID" is "0000:00bb" and then advertise its 10.2.0.0/16 IPv4 range via IPv6, like: tailscale up --advertise-routes=fd7a:115c:a1e0:b1a::bb:10.2.0.0/112 (112 being /128 minuse the /96 v6 prefix length) Then people in my tailnet can: $ curl '[fd7a:115c:a1e0:b1a::bb:10.2.0.230]' <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" .... Updates #3616, etc RELNOTE=initial support for TS IPv6 addresses to route v4 "via" specific nodes Change-Id: I9b49b6ad10410a24b5866b9fbc69d3cae1f600ef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Tom	24bdcbe5c7	net/dns, net/dns/resolver, wgengine: refactor DNS request path (#4364 ) * net/dns, net/dns/resolver, wgengine: refactor DNS request path Previously, method calls into the DNS manager/resolver types handled DNS requests rather than DNS packets. This is fine for UDP as one packet corresponds to one request or response, however will not suit an implementation that supports DNS over TCP. To support PRs implementing this in the future, wgengine delegates all handling/construction of packets to the magic DNS endpoint, to the DNS types themselves. Handling IP packets at this level enables future support for both UDP and TCP. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom	6be7931eb4	net/dns/resolver: return symbolic PTR records for TS service IPs (#4361 ) Fixes #1233 Signed-off-by: Tom DNetto <tom@tailscale.com> Co-authored-by: Tom DNetto <tom@tailscale.com>	3 years ago
Maisem Ali	309ddef852	net/netutil: add CheckIPForwardingLinux (#4301 ) Combine the code between `LocalBackend.CheckIPForwarding` and `controlclient.ipForwardingBroken`. Fixes #4300 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	e4d8d5e78b	net/packet, wgengine/netstack: remove workaround for old gvisor ECN bug Fixes #2642 Change-Id: Ic02251d24a4109679645d1c8336e0f961d0cce13 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	753f1bfad4	cmd/tailscale: write fewer known_hosts, resolve ssh host to FQDN early Updates #3802 Change-Id: Ic44fa2e6661a9c046e725c04fa6b8213d3d4d2b2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	b2f269d5b7	net/dnsfallback: do not attempt lookups of IPs. Currently if the passed in host is an IP, Lookup still attempts to resolve it with a dns server. This makes it just return the IP directly. Updates tailscale/corp#4475 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	b45bb577a0	net/dnscache: do not call LookupIPFallback if the context was canceled. When the context is canceled, dc.dialOne returns an error from line 345. This causes the defer on line 312 to try to resolve the host again, which triggers a dns lookup of "127.0.0.1" from derp. Updates tailscale/corp#4475 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	b647977b33	net/netutil: move some net utils from control/controlhttp to netutil In prep for reuse elsewhere. Change-Id: I1b804edf76ac66b9108e6f434e77eab7a7472d69 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
James Tucker	445c04c938	wgengine: inject packetbuffers rather than bytes (#4220 ) Plumb the outbound injection path to allow passing netstack PacketBuffers down to the tun Read, where they are decref'd to enable buffer re-use. This removes one packet alloc & copy, and reduces GC pressure by pooling outbound injected packets. Fixes #2741 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	f2041c9088	all: use strings.Cut even more Change-Id: I943ce72c6f339589235bddbe10d07799c4e37979 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Aaron Klotz	6e91f872af	net/tshttpproxy: ensure we pass the correct flags to WinHttpOpen on Win7 and Win8.0 The best flag to use on Win7 and Win8.0 is deprecated in Win8.1, so we resolve the flag depending on OS version info. Fixes https://github.com/tailscale/tailscale/issues/4201 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
David Anderson	2a412ac9ee	.github/workflows: work around golang/go#51629 Incidentally, simplify the go generate CI workflow, by marking the dnsfallback update non-hermetic (so CI will skip it) rather than manually filter it out of `go list`. Updates #4194 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	61ee72940c	all: use Go 1.18's strings.Cut More remain. Change-Id: I6ec562cc1f687600758deae1c9d7dbd0d04004cb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago

1 2 3 4 5 ...

589 Commits (c6ac82e3a6c10a0360df1cc16503c07790b337e1)