tailscale

Commit Graph

Author	SHA1	Message	Date
Irbe Krumina	231e44e742	Revert "cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11017 )" (#11669 ) Temporarily reverting this PR to avoid releasing half finished featue. This reverts commit `9e2f58f846`. Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Brad Fitzpatrick	e6983baa73	cmd/tailscale/cli: fix macOS crash reading envknob in init (#11667 ) And add a test. Regression from `a5e1f7d703` Fixes tailscale/corp#19036 Change-Id: If90984049af0a4820c96e1f77ddf2fce8cb3043f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Chloé Vulquin	0f3a292ebd	cli/configure: respect $KUBECONFIG (#11604 ) cmd/tailscale/cli: respect $KUBECONFIG * `$KUBECONFIG` is a `$PATH`-like: it defines a list. `tailscale config kubeconfig` works like the rest of the ecosystem so that if $KUBECONFIG is set it will write to the first existant file in the list, if none exist then the final entry in the list. * if `$KUBECONFIG` is an empty string, the old logic takes over. Notes: * The logic for file detection is inlined based on what `kind` does. Technically it's a race condition, since the file could be removed/added in between the processing steps, but the fallout shouldn't be too bad. https://github.com/kubernetes-sigs/kind/blob/v0.23.0-alpha/pkg/cluster/internal/kubeconfig/internal/kubeconfig/paths.go * The sandboxed (App Store) variant relies on a specific temporary entitlement to access the ~/.kube/config file. The entitlement is only granted to specific files, and so is not applicable to paths supplied by the user at runtime. While there may be other ways to achieve this access to arbitrary kubeconfig files, it's out of scope for now. Updates #11645 Signed-off-by: Chloé Vulquin <code@toast.bunkerlabs.net>	8 months ago
Brad Fitzpatrick	c71e8db058	cmd/tailscale/cli: stop spamming os.Stdout/os.Stderr in tests After: bradfitz@book1pro tailscale.com % ./tool/go test -c ./cmd/tailscale/cli bradfitz@book1pro tailscale.com % ./cli.test bradfitz@book1pro tailscale.com % Before: bradfitz@book1pro tailscale.com % ./tool/go test -c ./cmd/tailscale/cli bradfitz@book1pro tailscale.com % ./cli.test Warning: funnel=on for foo.test.ts.net:443, but no serve config run: `tailscale serve --help` to see how to configure handlers Warning: funnel=on for foo.test.ts.net:443, but no serve config run: `tailscale serve --help` to see how to configure handlers USAGE funnel <serve-port> {on\|off} funnel status [--json] Funnel allows you to publish a 'tailscale serve' server publicly, open to the entire internet. Turning off Funnel only turns off serving to the internet. It does not affect serving to your tailnet. SUBCOMMANDS status show current serve/funnel status error: path must be absolute error: invalid TCP source "localhost:5432": missing port in address error: invalid TCP source "tcp://somehost:5432" must be one of: localhost or 127.0.0.1 tcp://somehost:5432error: invalid TCP source "tcp://somehost:0" must be one of: localhost or 127.0.0.1 tcp://somehost:0error: invalid TCP source "tcp://somehost:65536" must be one of: localhost or 127.0.0.1 tcp://somehost:65536error: path must be absolute error: cannot serve web; already serving TCP You don't have permission to enable this feature. This also moves the color handling up to a generic spot so it's not just one subcommand doing it itself. See https://github.com/tailscale/tailscale/issues/11626#issuecomment-2041795129 Fixes #11643 Updates #11626 Change-Id: I3a49e659dcbce491f4a2cb784be20bab53f72303 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Brad Fitzpatrick	b0fbd85592	net/tsdial: partially fix "tailscale nc" (UserDial) on macOS At least in the case of dialing a Tailscale IP. Updates #4529 Change-Id: I9fd667d088a14aec4a56e23aabc2b1ffddafa3fe Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Brad Fitzpatrick	a5e1f7d703	ipn/{ipnlocal,localapi}: add API to toggle use of exit node This is primarily for GUIs, so they don't need to remember the most recently used exit node themselves. This adds some CLI commands, but they're disabled and behind the WIP envknob, as we need to consider naming (on/off is ambiguous with running an exit node, etc) as well as automatic exit node selection in the future. For now the CLI commands are effectively developer debug things to test the LocalAPI. Updates tailscale/corp#18724 Change-Id: I9a32b00e3ffbf5b29bfdcad996a4296b5e37be7e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Maisem Ali	3f4c5daa15	wgengine/netstack: remove SubnetRouterWrapper It was used when we only supported subnet routers on linux and would nil out the SubnetRoutes slice as no other router worked with it, but now we support subnet routers on ~all platforms. The field it was setting to nil is now only used for network logging and nowhere else, so keep the field but drop the SubnetRouterWrapper as it's not useful. Updates #cleanup Change-Id: Id03f9b6ec33e47ad643e7b66e07911945f25db79 Signed-off-by: Maisem Ali <maisem@tailscale.com>	8 months ago
Brad Fitzpatrick	ac2522092d	cmd/tailscale/cli: make exit-node list not random The output was changing randomly per run, due to range over a map. Then some misc style tweaks I noticed while debugging. Fixes #11629 Change-Id: I67aef0e68566994e5744d4828002f6eb70810ee1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Will Morrison	306bacc669	cmd/tailscale/cli: Add CLI command to update certs on Synology devices. Fixes #4674 Signed-off-by: Will Morrison <william.barr.morrison@gmail.com>	8 months ago
Charlotte Brandhorst-Satzkorn	98cf71cd73	tailscale: switch tailfs to drive syntax for api and logs (#11625 ) This change switches the api to /drive, rather than the previous /tailfs as well as updates the log lines to reflect the new value. It also cleans up some existing tailfs references. Updates tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	8 months ago
Charlotte Brandhorst-Satzkorn	93618a3518	tailscale: update tailfs functions and vars to use drive naming (#11597 ) This change updates all tailfs functions and the majority of the tailfs variables to use the new drive naming. Updates tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	8 months ago
Charlotte Brandhorst-Satzkorn	14683371ee	tailscale: update tailfs file and package names (#11590 ) This change updates the tailfs file and package names to their new naming convention. Updates #tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	8 months ago
Brad Fitzpatrick	1c259100b0	cmd/{derper,derpprobe}: add --version flag Fixes #11582 Change-Id: If99fc1ab6b89d624fbb07bd104dd882d2c7b50b4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Brad Fitzpatrick	ec87e219ae	logtail: delete unused code from old way to configure zstd Updates #cleanup Change-Id: I666ecf08ea67e461adf2a3f4daa9d1753b2dc1e4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Irbe Krumina	9b5176c4d9	cmd/k8s-operator: fix failing tests (#11541 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	9e2f58f846	cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11017 ) * cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster. Adds a simple nameserver that can respond to A record queries for ts.net DNS names. It can respond to queries from in-memory records, populated from a ConfigMap mounted at /config. It dynamically updates its records as the ConfigMap contents changes. It will respond with NXDOMAIN to queries for any other record types (AAAA to be implemented in the future). It can respond to queries over UDP or TCP. It runs a miekg/dns DNS server with a single registered handler for ts.net domain names. Queries for other domain names will be refused. The intended use of this is: 1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet services exposed via Tailscale operator egress over HTTPS 2) to allow non-tailnet cluster workloads to talk to workloads in the same cluster that have been exposed to tailnet over their MagicDNS names but on their cluster IPs. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/k8s-operator/deploy/crds,k8s-operator: add DNSConfig CustomResource Definition DNSConfig CRD can be used to configure the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster. Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/k8s-operator,k8s-operator: optionally reconcile nameserver resources Adds a new reconciler that reconciles DNSConfig resources. If a DNSConfig is deployed to cluster, the reconciler creates kube nameserver resources. This reconciler is only responsible for creating nameserver resources and not for populating nameserver's records. Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/{k8s-operator,k8s-nameserver}: generate DNSConfig CRD for charts, append to static manifests Signed-off-by: Irbe Krumina <irbe@tailscale.com> --------- Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Andrea Gottardo	008676f76e	cmd/serve: update warning for sandboxed macOS builds (#11530 )	8 months ago
Percy Wegmann	66e4d843c1	ipn/localapi: add support for multipart POST to file-put This allows sending multiple files via Taildrop in one request. Progress is tracked via ipn.Notify. Updates tailscale/corp#18202 Signed-off-by: Percy Wegmann <percy@tailscale.com>	8 months ago
Andrew Lytvynov	5d41259a63	cmd/tailscale/cli: remove Beta tag from tailscale update (#11529 ) Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	8 months ago
Irbe Krumina	4cbef20569	cmd/k8s-operator: redact auth key from debug logs (#11523 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Chris Milson-Tokunaga	b6dfd7443a	Change type of installCRDs (#11478 ) Including the double quotes (`"`) around the value made it appear like the helm chart should expect a string value for `installCRDs`. Signed-off-by: Chris Milson-Tokunaga <chris.w.milson@gmail.com>	8 months ago
Percy Wegmann	8b8b315258	net/tstun: use gaissmai/bart instead of tempfork/device This implementation uses less memory than tempfork/device, which helps avoid OOM conditions in the iOS VPN extension when switching to a Tailnet with ExitNode routing enabled. Updates tailscale/corp#18514 Signed-off-by: Percy Wegmann <percy@tailscale.com>	8 months ago
Brad Fitzpatrick	7b34154df2	all: deprecate Node.Capabilities (more), remove PeerChange.Capabilities [capver 89] First we had Capabilities []string. Then https://tailscale.com/blog/acl-grants (#4217) brought CapMap, a superset of Capabilities. Except we never really finished the transition inside the codebase to go all-in on CapMap. This does so. Notably, this coverts Capabilities on the wire early to CapMap internally so the code can only deal in CapMap, even against an old control server. In the process, this removes PeerChange.Capabilities support, which no known control plane sent anyway. They can and should use PeerChange.CapMap instead. Updates #11508 Updates #4217 Change-Id: I872074e226b873f9a578d9603897b831d50b25d9 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Joe Tsai	85febda86d	all: use zstdframe where sensible (#11491 ) Use the zstdframe package where sensible instead of plumbing around our own zstd.Encoder just for stateless operations. This causes logtail to have a dependency on zstd, but that's arguably okay since zstd support is implicit to the protocol between a client and the logging service. Also, virtually every caller to logger.NewLogger was manually setting up a zstd.Encoder anyways, meaning that zstd was functionally always a dependency. Updates #cleanup Updates tailscale/corp#18514 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	8 months ago
Irbe Krumina	b0c3e6f6c5	cmd/k8s-operator,ipn/conf.go: fix --accept-routes for proxies (#11453 ) Fix a bug where all proxies got configured with --accept-routes set to true. The bug was introduced in https://github.com/tailscale/tailscale/pull/11238. Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Mario Minardi	d2ccfa4edd	cmd/tailscale,ipn/ipnlocal: enable web client over quad 100 by default (#11419 ) Enable the web client over 100.100.100.100 by default. Accepting traffic from [tailnet IP]:5252 still requires setting the `webclient` user pref. Updates https://github.com/tailscale/tailscale/issues/10261 Signed-off-by: Mario Minardi <mario@tailscale.com>	8 months ago
Andrea Gottardo	08ebac9acb	version,cli,safesocket: detect non-sandboxed macOS GUI (#11369 ) Updates ENG-2848 We can safely disable the App Sandbox for our macsys GUI, allowing us to use `tailscale ssh` and do a few other things that we've wanted to do for a while. This PR: - allows Tailscale SSH to be used from the macsys GUI binary when called from a CLI - tweaks the detection of client variants in prop.go, with new functions `IsMacSys()`, `IsMacSysApp()` and `IsMacAppSandboxEnabled()` Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	9 months ago
Irbe Krumina	ea55f96310	cmd/tailscale/cli: fix configuring partially empty kubeconfig (#11417 ) When a user deletes the last cluster/user/context from their kubeconfig via 'kubectl delete-[cluster\|user\|context] command, kubectx sets the relevant field in kubeconfig to 'null'. This was breaking our conversion logic that was assuming that the field is either non-existant or is an array. Updates tailscale/corp#18320 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Anton Tolchanov	f12d2557f9	prober: add a DERP bandwidth probe Updates tailscale/corp#17912 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	9 months ago
Percy Wegmann	e496451928	ipn,cmd/tailscale,client/tailscale: add support for renaming TailFS shares - Updates API to support renaming TailFS shares. - Adds a CLI rename subcommand for renaming a share. - Renames the CLI subcommand 'add' to 'set' to make it clear that this is an add or update. - Adds a unit test for TailFS in ipnlocal Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Percy Wegmann	6c160e6321	ipn,tailfs: tie TailFS share configuration to user profile Previously, the configuration of which folders to share persisted across profile changes. Now, it is tied to the user's profile. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Percy Wegmann	16ae0f65c0	cmd/viewer: import views when generating byteSliceField Updates #cleanup Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Andrew Dunham	34176432d6	cmd/derper, types/logger: move log filter to shared package So we can use it in trunkd to quiet down the logs there. Updates #5563 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ie3177dc33f5ad103db832aab5a3e0e4f128f973f	9 months ago
Sonia Appasamy	c58c59ee54	{ipn,cmd/tailscale/cli}: move ServeConfig mutation logic to ipn/serve Moving logic that manipulates a ServeConfig into recievers on the ServeConfig in the ipn package. This is setup work to allow the web client and cli to both utilize these shared functions to edit the serve config. Any logic specific to flag parsing or validation is left untouched in the cli command. The web client will similarly manage its validation of user's requested changes. If validation logic becomes similar-enough, we can make a serve util for shared functionality, which likely does not make sense in ipn. Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	9 months ago
Sonia Appasamy	65c3c690cf	{ipn/serve,cmd/tailscale/cli}: move some shared funcs to ipn In preparation for changes to allow configuration of serve/funnel from the web client, this commit moves some functionality that will be shared between the CLI and web client to the ipn package's serve.go file, where some other util funcs are already defined. Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	9 months ago
Percy Wegmann	e324a5660f	ipn: include full tailfs shares in ipn notifications This allows the Mac application to regain access to restricted folders after restarts. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Brad Fitzpatrick	69f4b4595a	wgengine{,/wgint}: add wgint.Peer wrapper type, add to wgengine.Engine This adds a method to wgengine.Engine and plumbed down into magicsock to add a way to get a type-safe Tailscale-safe wrapper around a wireguard-go device.Peer that only exposes methods that are safe for Tailscale to use internally. It also removes HandshakeAttempts from PeerStatusLite that was just added as it wasn't needed yet and is now accessible ala cart as needed from the Peer type accessor. None of this is used yet. Updates #7617 Change-Id: I07be0c4e6679883e6eeddf8dbed7394c9e79c5f4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Irbe Krumina	95dcc1745b	cmd/k8s-operator: reconcile tailscale Ingresses when their backend Services change. (#11255 ) This is so that if a backend Service gets created after the Ingress, it gets picked up by the operator. Updates tailscale/tailscale#11251 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <1687799+knyar@users.noreply.github.com>	9 months ago
Irbe Krumina	303125d96d	cmd/k8s-operator: configure all proxies with declarative config (#11238 ) Containerboot container created for operator's ingress and egress proxies are now always configured by passing a configfile to tailscaled (tailscaled --config <configfile-path>. It does not run 'tailscale set' or 'tailscale up'. Upgrading existing setups to this version as well as downgrading existing setups at this version works. Updates tailscale/tailscale#10869 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	45d27fafd6	cmd/k8s-operator,k8s-operator,go.{mod,sum},tstest/tools: add Tailscale Kubernetes operator API docs (#11246 ) Add logic to autogenerate CRD docs. .github/workflows/kubemanifests.yaml CI workflow will fail if the doc is out of date with regard to the current CRDs. Docs can be refreshed by running make kube-generate-all. Updates tailscale/tailscale#11023 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Anton Tolchanov	8cc5c51888	health: warn about reverse path filtering and exit nodes When reverse path filtering is in strict mode on Linux, using an exit node blocks all network connectivity. This change adds a warning about this to `tailscale status` and the logs. Example in `tailscale status`: ``` - not connected to home DERP region 22 - The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310 ``` Example in the logs: ``` 2024/02/21 21:17:07 health("overall"): error: multiple errors: not in map poll The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310 ``` Updates #3310 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	9 months ago
Nick Khyl	7ef1fb113d	cmd/tailscaled, ipn/ipnlocal, wgengine: shutdown tailscaled if wgdevice is closed Tailscaled becomes inoperative if the Tailscale Tunnel wintun adapter is abruptly removed. wireguard-go closes the device in case of a read error, but tailscaled keeps running. This adds detection of a closed WireGuard device, triggering a graceful shutdown of tailscaled. It is then restarted by the tailscaled watchdog service process. Fixes #11222 Signed-off-by: Nick Khyl <nickk@tailscale.com>	9 months ago
Percy Wegmann	50fb8b9123	tailfs: replace webdavfs with reverse proxies Instead of modeling remote WebDAV servers as actual webdav.FS instances, we now just proxy traffic to them. This not only simplifies the code, but it also allows WebDAV locking to work correctly by making sure locks are handled by the servers that need to (i.e. the ones actually serving the files). Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Brad Fitzpatrick	e1bd7488d0	all: remove LenIter, use Go 1.22 range-over-int instead Updates #11058 Updates golang/go#65685 Change-Id: Ibb216b346e511d486271ab3d84e4546c521e4e22 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
James Tucker	0c5e65eb3f	cmd/derper: apply TCP keepalive and timeout to TLS as well I missed a case in the earlier patch, and so we're still sending 15s TCP keepalive for TLS connections, now adjusted there too. Updates tailscale/corp#17587 Updates #3363 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Andrea Gottardo	c8c999d7a9	cli/debug: rename DERP debug mode (#11220 ) Renames a debug flag in the CLI. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	9 months ago
Percy Wegmann	15b2c674bf	cmd/tailscale: add node attribute instructions to share command help This adds details on how to configure node attributes to allow sharing and accessing shares. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
James Tucker	edbad6d274	cmd/derper: add user timeout and reduce TCP keepalive The derper sends an in-protocol keepalive every 60-65s, so frequent TCP keepalives are unnecessary. In this tuning TCP keepalives should never occur for a DERP client connection, as they will send an L7 keepalive often enough to always reset the TCP keepalive timer. If however a connection does not receive an ACK promptly it will now be shutdown, which happens sooner than it would with a normal TCP keepalive tuning. This re-tuning reduces the frequency of network traffic from derp to client, reducing battery cost. Updates tailscale/corp#17587 Updates #3363 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Brad Fitzpatrick	10d130b845	cmd/derper, derp, tailcfg: add admission controller URL option So derpers can check an external URL for whether to permit access to a certain public key. Updates tailscale/corp#17693 Change-Id: I8594de58f54a08be3e2dbef8bcd1ff9b728ab297 Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Paul Scott	7708ab68c0	cmd/tailscale/cli: pass "-o 'CanonicalizeHostname no'" to ssh Fixes #10348 Signed-off-by: Paul Scott <paul@tailscale.com>	9 months ago
Percy Wegmann	91a1019ee2	cmd/testwrapper: apply results of all unit tests to coverage for all packages This allows coverage from tests that hit multiple packages at once to be reflected in all those packages' coverage. Updates #cleanup Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Will Norris	6b582cb8b6	cmd/tailscale: support clickable IPv6 web client addresses Instead of constructing the `ip:port` string ourselves, use netip.AddrPortFrom which handles IPv6 correctly. Updates #11164 Signed-off-by: Will Norris <will@tailscale.com>	9 months ago
Will Norris	24487815e1	cmd/tailscale: make web client URL clickable Updates #11151 Signed-off-by: Will Norris <will@tailscale.com>	9 months ago
Andrew Dunham	52f16b5d10	doctor/ethtool, ipn/ipnlocal: add ethtool bugreport check Updates #11137 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Idbe862d80e428adb044249c47d9096b87f29d5d8	9 months ago
Brad Fitzpatrick	61a1644c2a	go.mod, all: move away from inet.af domain seized by Taliban Updates inetaf/tcpproxy#39 Change-Id: I7fee276b116bd08397347c6c949011d76a2842cf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	10 months ago
Irbe Krumina	5bd19fd3e3	cmd/k8s-operator,k8s-operator: proxy configuration mechanism via a new ProxyClass custom resource (#11074 ) * cmd/k8s-operator,k8s-operator: introduce proxy configuration mechanism via ProxyClass custom resource. ProxyClass custom resource can be used to specify customizations for the proxy resources created by the operator. Add a reconciler that validates ProxyClass resources and sets a Ready condition to True or False with a corresponding reason and message. This is required because some fields (labels and annotations) require complex validations that cannot be performed at custom resource apply time. Reconcilers that use the ProxyClass to configure proxy resources are expected to verify that the ProxyClass is Ready and not proceed with resource creation if configuration from a ProxyClass that is not yet Ready is required. If a tailscale ingress/egress Service is annotated with a tailscale.com/proxy-class annotation, look up the corresponding ProxyClass and, if it is Ready, apply the configuration from the ProxyClass to the proxy's StatefulSet. If a tailscale Ingress has a tailscale.com/proxy-class annotation and the referenced ProxyClass custom resource is available and Ready, apply configuration from the ProxyClass to the proxy resources that will be created for the Ingress. Add a new .proxyClass field to the Connector spec. If connector.spec.proxyClass is set to a ProxyClass that is available and Ready, apply configuration from the ProxyClass to the proxy resources created for the Connector. Ensure that when Helm chart is packaged, the ProxyClass yaml is added to chart templates. Ensure that static manifest generator adds ProxyClass yaml to operator.yaml. Regenerate operator.yaml Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Percy Wegmann	d0ef3a25df	cmd/tailscale: hide share subcommand Fixes #1115 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Percy Wegmann	55b372a79f	tailscaled: revert to using pointers for subcommands As part of #10631, we stopped using function pointers for subcommands, preventing us from registering platform-specific installSystemDaemon and uninstallSystemDaemon subcommands. Fixes #11099 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Percy Wegmann	87154a2f88	tailfs: fix startup issues on windows Starts TailFS for Windows too, initializes shares on startup. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Percy Wegmann	abab0d4197	tailfs: clean up naming and package structure - Restyles tailfs -> tailFS - Defines interfaces for main TailFS types - Moves implemenatation of TailFS into tailfsimpl package Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
James Tucker	24bac27632	util/rands: add Shuffle and Perm functions with on-stack RNG state The new math/rand/v2 package includes an m-local global random number generator that can not be reseeded by the user, which is suitable for most uses without the RNG pools we have in a number of areas of the code base. The new API still does not have an allocation-free way of performing a seeded operations, due to the long term compiler bug around interface parameter escapes, and the Source interface. This change introduces the two APIs that math/rand/v2 can not yet replace efficiently: seeded Perm() and Shuffle() operations. This implementation chooses to use the PCG random source from math/rand/v2, as with sufficient compiler optimization, this source should boil down to only two on-stack registers for random state under ideal conditions. Updates #17243 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
Jenny Zhang	c446451bfa	cmd/gitops-pusher: only use OAuth creds if non-empty string `os.LookupEnv` may return true if the variable is present in the environment but an empty string. We should only attempt to set OAuth Config if thsoe values are non-empty. Updates gitops-acl-action#33 Signed-off-by: Jenny Zhang <jz@tailscale.com>	10 months ago
Percy Wegmann	993acf4475	tailfs: initial implementation Add a WebDAV-based folder sharing mechanism that is exposed to local clients at 100.100.100.100:8080 and to remote peers via a new peerapi endpoint at /v0/tailfs. Add the ability to manage folder sharing via the new 'share' CLI sub-command. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Joe Tsai	94a4f701c2	all: use reflect.TypeFor now available in Go 1.22 (#11078 ) Updates #cleanup Signed-off-by: Joe Tsai <joetsai@digital-static.net>	10 months ago
Charlotte Brandhorst-Satzkorn	0f042b9814	cmd/tailscale/cli: fix exit node status output (#11076 ) This change fixes the format of tailscale status output when location based exit nodes are present. Fixes #11065 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	10 months ago
Sonia Appasamy	1217f655c0	cmd/dist: update logs for synology builds Update logs for synology builds to more clearly callout which variant is being built. The two existing variants are: 1. Sideloaded (can be manual installed on a device by anyone) 2. Package center distribution (by the tailscale team) Updates #cleanup Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	10 months ago
Will Norris	128c99d4ae	client/web: add new readonly mode The new read-only mode is only accessible when running `tailscale web` by passing a new `-readonly` flag. This new mode is identical to the existing login mode with two exceptions: - the management client in tailscaled is not started (though if it is already running, it is left alone) - the client does not prompt the user to login or switch to the management client. Instead, a message is shown instructing the user to use other means to manage the device. Updates #10979 Signed-off-by: Will Norris <will@tailscale.com>	10 months ago
Irbe Krumina	a6cc2fdc3e	cmd/{containerboot,k8s-operator/deploy/manifests}: optionally allow proxying cluster traffic to a cluster target via ingress proxy (#11036 ) * cmd/containerboot,cmd/k8s-operator/deploy/manifests: optionally forward cluster traffic via ingress proxy. If a tailscale Ingress has tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation, configure the associated ingress proxy to have its tailscale serve proxy to listen on Pod's IP address. This ensures that cluster traffic too can be forwarded via this proxy to the ingress backend(s). In containerboot, if EXPERIMENTAL_PROXY_CLUSTER_TRAFFIC_VIA_INGRESS is set to true and the node is Kubernetes operator ingress proxy configured via Ingress, make sure that traffic from within the cluster can be proxied to the ingress target. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Brad Fitzpatrick	2bd3c1474b	util/cmpx: delete now that we're using Go 1.22 Updates #11058 Change-Id: I09dea8e86f03ec148b715efca339eab8b1f0f644 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	10 months ago
Andrew Lytvynov	db3776d5bf	go.toolchain.rev: bump to Go 1.22.0 (#11055 ) Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	10 months ago
Chris Palmer	a633a30711	cmd/hello: link to the Hello KB article (#11022 ) Fixes https://github.com/tailscale/corp/issues/17104 Signed-off-by: Chris Palmer <cpalmer@tailscale.com>	10 months ago
Chris Palmer	9744ad47e3	cmd/hello: avoid deprecated apis (#10957 ) Updates #cleanup Signed-off-by: Chris Palmer <cpalmer@tailscale.com>	10 months ago
Will Norris	13f8a669d5	cmd/gitops-pusher: fix logic for checking credentials gitops-pusher supports authenticating with an API key or OAuth credentials (added in #7393). You shouldn't ever use both of those together, so we error if both are set. In tailscale/gitops-acl-action#24, OAuth support is being added to the GitHub action. In that environment, both the TS_API_KEY and OAuth variables will be set, even if they are empty values. This causes an error in gitops-pusher which expects only one to be set. Update gitops-pusher to check that only one set of environment variables are non-empty, rather than just checking if they are set. Updates #7393 Signed-off-by: Will Norris <will@tailscale.com>	10 months ago
Andrew Lytvynov	fbfc3b7e51	cmd/tailscale/cli: run Watch with NotifyNoPrivateKeys (#10950 ) When running as non-root non-operator user, you get this error: ``` $ tailscale serve 8080 Access denied: watch IPN bus access denied, must set ipn.NotifyNoPrivateKeys when not running as admin/root or operator Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root. ``` It should fail, but the error message is confusing. With this fix: ``` $ tailscale serve 8080 sending serve config: Access denied: serve config denied Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root. ``` Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	10 months ago
Irbe Krumina	370ec6b46b	cmd/k8s-operator: don't proceed with Ingress that has no valid backends (#10919 ) Do not provision resources for a tailscale Ingress that has no valid backends. Updates tailscale/tailscale#10910 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
James Tucker	7e3bcd297e	go.mod,wgengine/netstack: bump gvisor Updates #8043 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
James Tucker	457102d070	go.mod: bump most deps for start of cycle Plan9 CI is disabled. 3p dependencies do not build for the target. Contributor enthusiasm appears to have ceased again, and no usage has been made. Skipped gvisor, nfpm, and k8s. Updates #5794 Updates #8043 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
Andrew Dunham	7a0392a8a3	wgengine/netstack: expose gVisor metrics through expvar When tailscaled is run with "-debug 127.0.0.1:12345", these metrics are available at: http://localhost:12345/debug/metrics Updates #8210 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I19db6c445ac1f8344df2bc1066a3d9c9030606f8	10 months ago
ChandonPierre	2ce596ea7a	cmd/k8s-operator/deploy: allow modifying operator tags via Helm values Updates tailscale/tailscale#10659 Signed-off-by: Chandon Pierre <cpierre@coreweave.com>	10 months ago
James Tucker	8250582fe6	ipn/ipnlocal: make app connector configuration concurrent If there are routes changes as a side effect of an app connector configuration update, the connector configuration may want to reenter a lock, so must be started asynchronously. Updates tailscale/corp#16833 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
James Tucker	38a1cf748a	control/controlclient,util/execqueue: extract execqueue into a package This is a useful primitive for asynchronous execution of ordered work I want to use in another change. Updates tailscale/corp#16833 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
Joe Tsai	c25968e1c5	all: make use of ctxkey everywhere (#10846 ) Also perform minor cleanups on the ctxkey package itself. Provide guidance on when to use ctxkey.Key[T] over ctxkey.New. Also, allow for interface kinds because the value wrapping trick also happens to fix edge cases with interfaces in Go. Updates #cleanup Signed-off-by: Joe Tsai <joetsai@digital-static.net>	10 months ago
Irbe Krumina	1c3c3d6752	cmd/k8s-operator: warn if unsupported Ingress Exact path type is used. (#10865 ) To reduce the likelihood of breaking users, if we implement stricter Exact path type matching in the future. Updates tailscale/tailscale#10730 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	50b52dbd7d	cmd/k8s-operator: sync StatefulSet labels to their Pods (#10861 ) So that users have predictable label values to use when configuring network policies. Updates tailscale/tailscale#10854 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	d0492fdee5	cmd/k8s-operator: adds a tailscale IngressClass resource, prints warning if class not found. (#10823 ) * cmd/k8s-operator/deploy: deploy a Tailscale IngressClass resource. Some Ingress validating webhooks reject Ingresses with .spec.ingressClassName for which there is no matching IngressClass. Additionally, validate that the expected IngressClass is present, when parsing a tailscale `Ingress`. We currently do not utilize the IngressClass, however we might in the future at which point we might start requiring that the right class for this controller instance actually exists. Updates tailscale/tailscale#10820 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com>	10 months ago
Charlotte Brandhorst-Satzkorn	e6910974ca	cmd/tailscale/cli: add description to exit-node CLI command This change adds a description to the exit-node CLI command. This description will be displayed when using `tailscale -h` and `tailscale exit-node -h`. Fixes #10787 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	11 months ago
Irbe Krumina	169778e23b	cmd/k8s-operator: minor fix in name gen (#10830 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Irbe Krumina	5cc1bfe82d	cmd/k8s-operator: remove configuration knob for Connector (#10791 ) The configuration knob (that defaulted to Connector being disabled) was added largely because the Connector CRD had to be installed in a separate step. Now when the CRD has been added to both chart and static manifest, we can have it on by default. Updates tailscale/tailscale#10878 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Irbe Krumina	469af614b0	cmd/k8s-operator: fix base truncating for extra long Service names (#10825 ) cmd/k8s-operator: fix base truncating for extra long Service names StatefulSet names for ingress/egress proxies are calculated using Kubernetes name generator and the parent resource name as a base. The name generator also cuts the base, but has a higher max cap. This commit fixes a bug where, if we get a shortened base back from the generator, we cut off too little as the base that we have cut will be passed into the generator again, which will then itself cut less because the base is shorter- so we end up with a too long name again. Updates tailscale/tailscale#10807 Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Irbe Krumina <irbekrm@gmail.com>	11 months ago
Andrew Lytvynov	4ec6a78551	go.mod: update golang-x-crypto fork (#10786 ) Pick up a bunch of recent upstream commits. Updates #8593 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Irbe Krumina	35f49ac99e	cmd/k8s-operator: add Connector CRD to Helm chart and static manifests (#10775 ) cmd/k8s-operator: add CRD to chart and static manifest Add functionality to insert CRD to chart at package time. Insert CRD to static manifests as this is where they are currently consumed from. Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Sonia Appasamy	ea9c7f991a	cli/set: add printout when web client started Prints a helpful message with the web UI's address when running tailscale set --webclient. Updates tailscale/corp#16345 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	11 months ago
Rhea Ghosh	4ce33c9758	taildrop: remove breaking abstraction layers for apple (#10728 ) Removes the avoidFinalRename logic and all associated code as it is no longer required by the Apple clients. Enables resume logic to be usable for Apple clients. Fixes tailscale/corp#14772 Signed-off-by: Rhea Ghosh <rhea@tailscale.com>	11 months ago
Andrew Dunham	20f3f706a4	net/netutil: allow 16-bit 4via6 site IDs The prefix has space for 32-bit site IDs, but the validateViaPrefix function would previously have disallowed site IDs greater than 255. Fixes tailscale/corp#16470 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I4cdb0711dafb577fae72d86c4014cf623fa538ef	11 months ago
Irbe Krumina	05093ea7d9	cmd/k8s-operator,k8s-operator: allow the operator to deploy exit nodes via Connector custom resource (#10724 ) cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR. Make it possible to define an exit node to be deployed to a Kubernetes cluster via Connector Custom resource. Also changes to Connector API so that one Connector corresponds to one Tailnet node that can be either a subnet router or an exit node or both. The Kubernetes operator parses Connector custom resource and, if .spec.isExitNode is set, configures that Tailscale node deployed for that connector as an exit node. Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com>	11 months ago
James Tucker	953fa80c6f	cmd/{derper,stund},net/stunserver: add standalone stun server Add a standalone server for STUN that can be hosted independently of the derper, and factor that back into the derper. Fixes #8434 Closes #8435 Closes #10745 Signed-off-by: James Tucker <james@tailscale.com>	11 months ago
Irbe Krumina	133699284e	cmd/containerboot: add EXPERIMENTAL_TS_CONFIGFILE_PATH env var to allow passing tailscaled config in a file (#10759 ) * cmd/containerboot: optionally configure tailscaled with a configfile. If EXPERIMENTAL_TS_CONFIGFILE_PATH env var is set, only run tailscaled with the provided config file. Do not run 'tailscale up' or 'tailscale set'. * cmd/containerboot: store containerboot accept_dns val in bool pointer So that we can distinguish between the value being set to false explicitly bs being unset. Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Adrian Dewhurst	c05c4bdce4	ipn: apply ControlURL policy before login Unlike most prefs, the ControlURL policy needs to take effect before login. This resolves an issue where on first start, even when the ControlURL policy is set, it will generate a login URL to the Tailscale SaaS server. Updates tailscale/coral#118 Fixes #10736 Change-Id: I6da2a521f64028c15dbb6ac8175839fc3cc4e858 Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	11 months ago
Andrew Dunham	d3574a350f	cmd/tailscale, ipn/ipnlocal: add 'debug dial-types' command This command allows observing whether a given dialer ("SystemDial", "UserDial", etc.) will successfully obtain a connection to a provided host, from inside tailscaled itself. This is intended to help debug a variety of issues from subnet routers to split DNS setups. Updates #9619 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ie01ebb5469d3e287eac633ff656783960f697b84	11 months ago
Andrew Dunham	46bdbb3878	cmd/tailscaled, tsnet: don't return an interface containing a nil pointer This tripped me up when I was testing something and wrote: if conn != nil { conn.Close() } In netstack mode, when an error occurred we were getting a non-nil error and a non-nil interface that contained a nil pointer. Instead, just return a nil interface value. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Id9ef3dd24529e0e8c53adc60ed914c31fbb10cc4	11 months ago

1 2 3 4 5 ...

1774 Commits (c3c18027c6e2da96f9c13cbcdba169f1fcc952d3)