7046 Commits (c25968e1c5163fdac963cae7857e88044caeef4a)

 

All Branches   

Search

Author	SHA1	Message	Date
James Tucker	1c88a77f68	net/dns/publicdns: update Quad9 addresses and references ... One Quad9 IPv6 address was incorrect, and an additional group needed adding. Additionally I checked Cloudflare and included source reference URLs for both. Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Denton Gentry	6e6a510001	go.toolchain.rev: update to Go 1.21.1+ ... Updates https://github.com/tailscale/tailscale/issues/8419 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	1 year ago
Maisem Ali	4669e7f7d5	cmd/containerboot: add iptables based MSS clamping for ingress/egress proxies ... In typical k8s setups, the MTU configured on the eth0 interfaces is typically 1500 which results in packets being dropped when they make it to proxy pods as the tailscale0 interface has a 1280 MTU. As the primary use of this functionality is TCP, add iptables based MSS clamping to allow connectivity. Updates #502 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	546506a54d	ipn/ipnlocal: add a test for recent WhoIs regression ... This would've prevented #9470. This used to pass, fails as of 9538e9f970, and passes again once #9472 is in. Updates #9470 Change-Id: Iab97666f7a318432fb3b6372a177ab50c55d4697 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Joe Tsai	ae89482f25	ipn/ipnlocal: fix LocalBackend.WhoIs for self (#9472) ... 9538e9f970 broke LocalBackend.WhoIs where you can no longer lookup yourself in WhoIs. This occurs because the LocalBackend.peers map only contains peers. If we fail to lookup a peer, double-check whether it is ourself. Fixes #9470 Signed-off-by: Joe Tsai <joetsai@digital-static.net> Co-authored-by: Rhea Ghosh <rhea@tailscale.com>	1 year ago
Irbe Krumina	c5b2a365de	cmd/k8s-operator: fix egress service name (#9494) ... Updates https://github.com/tailscale/tailscale/issues/502 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 year ago
Maisem Ali	5f4d76c18c	cmd/k8s-operator: rename egress annotation ... It was tailscale.com/ts-tailnet-target-ip, which was pretty redundant. Change it to tailscale.com/tailnet-ip. Updates #502 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	ea9dd8fabc	Revert "ipn/ipnlocal: plumb ExitNodeDNSResolvers for IsWireGuardOnly exit nodes" ... This reverts commit f6845b10f6. Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
James Tucker	d52ab181c3	Revert "ipn/ipnlocal: allow Split-DNS and default resolvers with WireGuard nodes" ... This reverts commit c7ce4e07e5. Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
James Tucker	c7ce4e07e5	ipn/ipnlocal: allow Split-DNS and default resolvers with WireGuard nodes ... The initial implementation directly mirrored the behavior of Tailscale exit nodes, where the WireGuard exit node DNS took precedence over other configuration. This adjusted implementation treats the WireGuard DNS resolvers as a lower precedence default resolver than the tailnet default resolver, and allows split DNS configuration as well. This also adds test coverage to the existing DNS selection behavior with respect to default resolvers and split DNS routes for Tailscale exit nodes above cap 25. There may be some refinement to do in the logic in those cases, as split DNS may not be working as we intend, though that would be a pre-existing and separate issue. Updates #9377 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Maisem Ali	3056a98bbd	net/tstun: add better logging of natV4Config ... It might as well have been spewing out gibberish. This adds a nicer output format for us to be able to read and identify whats going on. Sample output ``` natV4Config{nativeAddr: 100.83.114.95, listenAddrs: [10.32.80.33], dstMasqAddrs: [10.32.80.33: 407 peers]} ``` Fixes tailscale/corp#14650 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
David Anderson	ed50f360db	util/lru: update c.head when deleting the most recently used entry ... Fixes tailscale/corp#14747 Signed-off-by: David Anderson <danderson@tailscale.com> Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
Flakes Updater	4232826cce	go.mod.sri: update SRI hash for go.mod changes ... Signed-off-by: Flakes Updater <noreply+flakes-updater@tailscale.com>	1 year ago
Will Norris	652f77d236	client/web: switch to using prebuilt web client assets ... Updates tailscale/corp#13775 Co-authored-by: Sonia Appasamy <sonia@tailscale.com> Signed-off-by: Sonia Appasamy <sonia@tailscale.com> Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Irbe Krumina	35ad2aafe3	Makefile: make it possibe to pass a custom tag when building dev images (#9461) ... Updates #cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 year ago
License Updater	1166765559	licenses: update win/apple licenses ... Signed-off-by: License Updater <noreply+license-updater@tailscale.com>	1 year ago
Tom DNetto	c08cf2a9c6	all: declare & plumb IPv6 masquerade address for peer ... This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing IPv6 NAT support to/from peers. A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing. Signed-off-by: Tom DNetto <tom@tailscale.com> Updates ENG-991	1 year ago
Andrew Dunham	d9ae7d670e	net/portmapper: add clientmetric for UPnP error codes ... This should allow us to gather a bit more information about errors that we encounter when creating UPnP mappings. Since we don't have a "LabelMap" construction for clientmetrics, do what sockstats does and lazily register a new metric when we see a new code. Updates #9343 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ibb5aadd6138beb58721f98123debcc7273b611ba	1 year ago
Maisem Ali	19a9d9037f	tailcfg: add NodeCapMap ... Like PeerCapMap, add a field to `tailcfg.Node` which provides a map of Capability to raw JSON messages which are deferred to be parsed later by the application code which cares about the specific capabilities. This effectively allows us to prototype new behavior without having to commit to a schema in tailcfg, and it also opens up the possibilities to develop custom behavior in tsnet applications w/o having to plumb through application specific data in the MapResponse. Updates #4217 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	4da0689c2c	tailcfg: add Node.HasCap helpers ... This makes a follow up change less noisy. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	d06b48dd0a	tailcfg: add RawMessage ... This adds a new RawMessage type backed by string instead of the json.RawMessage which is backed by []byte. The byte slice makes the generated views be a lot more defensive than the need to be which we can get around by using a string instead. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Sonia Appasamy	258f16f84b	ipn/ipnlocal: add tailnet MagicDNS name to ipn.LoginProfile ... Start backfilling MagicDNS suffixes on LoginProfiles. Updates #9286 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	1 year ago
Brad Fitzpatrick	0d991249e1	types/netmap: remove NetworkMap.{Addresses,MachineStatus} ... And convert all callers over to the methods that check SelfNode. Now we don't have multiple ways to express things in tests (setting fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't have multiple ways to check those two fields (often only checking one or the other). Updates #9443 Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Marwan Sulaiman	d25217c9db	cmd/tailscale/cli: error when serving foreground if bg already exists ... This PR fixes a bug to make sure that we don't allow two configs exist with duplicate ports Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Brad Fitzpatrick	98b5da47e8	types/views: add SliceContainsFunc like slices.ContainsFunc ... Needed for a future change. Updates #cleanup Change-Id: I6d89ee8a048b3bb1eb9cfb2e5a53c93aed30b021 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	a61caea911	tailcfg: define a type for NodeCapability ... Instead of untyped string, add a type to identify these. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	3d37328af6	wgengine, proxymap: split out port mapping from Engine to new type ... (Continuing quest to remove rando stuff from the "Engine") Updates #cleanup Change-Id: I77f39902c2194410c10c054b545d70c9744250b0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	db2f37d7c6	ipn/ipnlocal: add some test accessors ... Updates tailscale/corp#12990 Change-Id: I82801ac4c003d2c7e1352c514adb908dbf01be87 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	9538e9f970	ipn/ipnlocal: keep internal map updated of latest Nodes post mutations ... We have some flaky integration tests elsewhere that have no one place to ask about the state of the world. This makes LocalBackend be that place (as it's basically there anyway) but doesn't yet add the ForTest accessor method. This adds a LocalBackend.peers map[NodeID]NodeView that is incrementally updated as mutations arrive. And then we start moving away from using NetMap.Peers at runtime (UpdateStatus no longer uses it now). And remove another copy of NodeView in the LocalBackend nodeByAddr map. Change that to point into b.peers instead. Future changes will then start streaming whole-node-granularity peer change updates to WatchIPNBus clients, tracking statefully per client what each has seen. This will get the GUI clients from receiving less of a JSON storm of updates all the time. Updates #1909 Change-Id: I14a976ca9f493bdf02ba7e6e05217363dcf422e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	926c990a09	types/netmap: start phasing out Addresses, add GetAddresses method ... NetworkMap.Addresses is redundant with the SelfNode.Addresses. This works towards a TODO to delete NetworkMap.Addresses and replace it with a method. This is similar to #9389. Updates #cleanup Change-Id: Id000509ca5d16bb636401763d41bdb5f38513ba0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	fb5ceb03e3	types/netmap: deprecate NetworkMap.MachineStatus, add accessor method ... Step 1 of deleting it, per TODO. Updates #cleanup Change-Id: I1d3d0165ae5d8b20610227d60640997b73568733 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	0f3c279b86	ipn/ipnlocal: delete some unused code ... Updates #cleanup Change-Id: I90b46c476f135124d97288e776c2b428b351b8b8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	760b945bc0	ipn/{ipnlocal,ipnstate}: start simplifying UpdateStatus/StatusBuilder ... * Remove unnecessary mutexes (there's no concurrency) * Simplify LocalBackend.UpdateStatus using the StatusBuilder.WantPeers field that was added in 0f604923d3, removing passing around some method values into func args. And then merge two methods. More remains, but this is a start. Updates #9433 Change-Id: Iaf2d7ec6e4e590799f00bae185465a4fd089b822 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
James Tucker	8ab46952d4	net/ping: fix ICMP echo code field to 0 ... The code was trying to pass the ICMP protocol number here (1), which is not a valid code. Many servers will not respond to echo messages with codes other than 0. https://www.iana.org/assignments/icmp-parameters/icmp-parameters.xhtml#icmp-parameters-codes-8 Updates #9299 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
James Tucker	f6845b10f6	ipn/ipnlocal: plumb ExitNodeDNSResolvers for IsWireGuardOnly exit nodes ... This enables installing default resolvers specified by tailcfg.Node.ExitNodeDNSResolvers when the exit node is selected. Updates #9377 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
James Tucker	e7727db553	tailcfg: add DNS address list for IsWireGuardOnly nodes ... Tailscale exit nodes provide DNS service over the peer API, however IsWireGuardOnly nodes do not have a peer API, and instead need client DNS parameters passed in their node description. For Mullvad nodes this will contain the in network 10.64.0.1 address. Updates #9377 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Maisem Ali	335a5aaf9a	cmd/k8s-operator: add APISERVER_PROXY env ... The kube-apiserver proxy in the operator would only run in auth proxy mode but thats not always desirable. There are situations where the proxy should just be a transparent proxy and not inject auth headers, so do that using a new env var APISERVER_PROXY and deprecate the AUTH_PROXY env. THe new env var has three options `false`, `true` and `noauth`. Updates #8317 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
James Tucker	4c693d2ee8	net/dns/publicdns: update Mullvad DoH server list ... The following IPs are not used anymore: 193.19.108.2 and 193.19.108.3. All of the servers are now named consistently under dns.mullvad.net. Several new servers were added. https://mullvad.net/en/help/dns-over-https-and-dns-over-tls/ Updates #5416 Updates #9345 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Charlotte Brandhorst-Satzkorn	8428a64b56	words: holy mole we need some more mammals ... Particularly of the polydactyl kind. Updates #14698 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	1 year ago
James Tucker	1858ad65c8	cmd/cloner: do not allocate slices when the source is nil ... tailcfg.Node zero-value clone equality checks failed when I added a []*foo to the structure, as the zero value and it's clone contained a different slice header. Updates #9377 Updates #9408 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
James Tucker	85155ddaf3	tailcfg: remove completed TODO from IsWireGuardOnly ... Updates #7826 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Tyler Smalley	dfefaa5e35	Use parent serve config ... Signed-off-by: Tyler Smalley <tyler@tailscale.com>	1 year ago
Marwan Sulaiman	f3a5bfb1b9	cmd/tailscale/cli: add set serve validations ... This PR adds validations for the new new funnel/serve commands under the following rules: 1. There is always a single config for one port (bg or fg). 2. Foreground configs under the same port cannot co-exists (for now). 3. Background configs can change as long as the serve type is the same. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Andrew Lytvynov	7ce1c6f981	.github/workflows: fix slack-action format in govulncheck.yml (#9390) ... Currently slack messages for errors fail: https://github.com/tailscale/tailscale/actions/runs/6159104272/job/16713248204 ``` Error: Unexpected token in JSON at position 151 ``` This is likely due to the line break in the text. Restructure the message to use separate title/text and fix the slack webhook body. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
Marwan Sulaiman	3421784e37	cmd/tailscale/cli: use optimistic concurrency control on SetServeConfig ... This PR uses the etag/if-match pattern to ensure multiple calls to SetServeConfig are synchronized. It currently errors out and asks the user to retry but we can add occ retries as a follow up. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Brad Fitzpatrick	6e66e5beeb	cmd/tsconnect/wasm: pass a netmon to ipnserver.New ... It became required as of 6e967446e4 Updates #8052 Change-Id: I08d100534254865293c1beca5beff8e529e4e9ac Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	99bb355791	wgengine: remove DiscoKey method from Engine interface ... It has one user (LocalBackend) which can ask magicsock itself. Updates #cleanup Change-Id: I8c03cbb1e5ba57b0b442621b5fa467030c14a2e2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Will Norris	9843e922b8	README: update docs for building web client ... Move into the main "building" section and add the missing `yarn install` step. Updates #9312 Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Tyler Smalley	82c1dd8732	cmd/tailscale: funnel wip cleanup and additional test coverage (#9316) ... General cleanup and additional test coverage of WIP code. * use enum for serveType * combine instances of ServeConfig access within unset * cleanMountPoint rewritten into cleanURLPath as it only handles URL paths * refactor and test expandProxyTargetDev > **Note** > Behind the `TAILSCALE_USE_WIP_CODE` flag updates #8489 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	1 year ago
Brad Fitzpatrick	3c276d7de2	wgengine: remove SetDERPMap method from Engine interface ... (continuing the mission of removing rando methods from the Engine interface that we don't need anymore) Updates #cleanup Change-Id: Id5190917596bf04d7185c3b331a852724a3f5a16 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago