tailscale

Commit Graph

Author	SHA1	Message	Date
Nick Hill	c2144c44a3	net/dns/resolver: update (forwarder).forwardWithDestChan to always return an error unless it sends a response to responseChan We currently have two executions paths where (forwarder).forwardWithDestChan returns nil, rather than an error, without sending a DNS response to responseChan. These paths are accompanied by a comment that reads: // Returning an error will cause an internal retry, there is // nothing we can do if parsing failed. Just drop the packet. But it is not (or no longer longer) accurate: returning an error from forwardWithDestChan does not currently cause a retry. Moreover, although these paths are currently unreachable due to implementation details, if (forwarder).forwardWithDestChan were to return nil without sending a response to responseChan, it would cause a deadlock at one call site and a panic at another. Therefore, we update (forwarder).forwardWithDestChan to return errors in those two paths and remove comments that were no longer accurate and misleading. Updates #cleanup Updates #13571 Signed-off-by: Nick Hill <mykola.khyl@gmail.com>	1 month ago
Nick Hill	e7545f2eac	net/dns/resolver: translate 5xx DoH server errors into SERVFAIL DNS responses If a DoH server returns an HTTP server error, rather than a SERVFAIL within a successful HTTP response, we should handle it in the same way as SERVFAIL. Updates #13571 Signed-off-by: Nick Hill <mykola.khyl@gmail.com>	1 month ago
Nick Hill	17335d2104	net/dns/resolver: forward SERVFAIL responses over PeerDNS As per the docstring, (forwarder).forwardWithDestChan should either send to responseChan and returns nil, or returns a non-nil error (without sending to the channel). However, this does not hold when all upstream DNS servers replied with an error. We've been handling this special error path in (Resolver).Query but not in (Resolver).HandlePeerDNSQuery. As a result, SERVFAIL responses from upstream servers were being converted into HTTP 503 responses, instead of being properly forwarded as SERVFAIL within a successful HTTP response, as per RFC 8484, section 4.2.1: A successful HTTP response with a 2xx status code (see Section 6.3 of [RFC7231]) is used for any valid DNS response, regardless of the DNS response code. For example, a successful 2xx HTTP status code is used even with a DNS message whose DNS response code indicates failure, such as SERVFAIL or NXDOMAIN. In this PR we fix (forwarder).forwardWithDestChan to no longer return an error when it sends a response to responseChan, and remove the special handling in (*Resolver).Query, as it is no longer necessary. Updates #13571 Signed-off-by: Nick Hill <mykola.khyl@gmail.com>	1 month ago
Percy Wegmann	f9949cde8b	client/tailscale,cmd/{cli,get-authkey,k8s-operator}: set distinct User-Agents This helps better distinguish what is generating activity to the Tailscale public API. Updates tailscale/corp#23838 Signed-off-by: Percy Wegmann <percy@tailscale.com>	1 month ago
Jordan Whited	33029d4486	net/netcheck: fix netcheck cli-triggered nil pointer deref (#13782 ) Updates #13780 Signed-off-by: Jordan Whited <jordan@tailscale.com>	1 month ago
Jonathan Nobels	acb4a22dcc	VERSION.txt: this is v1.77.0 (#13779 )	1 month ago
Brad Fitzpatrick	508980603b	ipn/conffile: don't depend on hujson on iOS/Android Fixes #13772 Change-Id: I3ae03a5ee48c801f2e5ea12d1e54681df25d4604 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 month ago
Andrew Dunham	91f58c5e63	tsnet: fix panic caused by logging after test finishes Updates #13773 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I95e03eb6aef1639bd4a2efd3a415e2c10cdebc5a	1 month ago
Brad Fitzpatrick	1938685d39	clientupdate: don't link distsign on platforms that don't download Updates tailscale/corp#20099 Change-Id: Ie3b782379b19d5f7890a8d3a378096b4f3e8a612 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 month ago
Irbe Krumina	db1519cc9f	k8s-operator/apis: revert ProxyGroup readiness cond name change (#13770 ) No need to prefix this with 'Tailscale' for tailscale.com custom resource types. Updates tailscale/tailscale#13406 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 month ago
Brad Fitzpatrick	2531065d10	clientupdate, ipn/localapi: don't use google/uuid, thin iOS deps We were using google/uuid in two places and that brought in database/sql/driver. We didn't need it in either place. Updates #13760 Updates tailscale/corp#20099 Change-Id: Ieed32f1bebe35d35f47ec5a2a429268f24f11f1f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 month ago
Brad Fitzpatrick	fb420be176	safesocket: don't depend on go-ps on iOS There's never a tailscaled on iOS. And we can't run child processes to look for it anyway. Updates tailscale/corp#20099 Change-Id: Ieb3776f4bb440c4f1c442fdd169bacbe17f23ddb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 month ago
Brad Fitzpatrick	367fba8520	control/controlhttp: don't link ts2021 server + websocket code on iOS We probably shouldn't link it in anywhere, but let's fix iOS for now. Updates #13762 Updates tailscale/corp#20099 Change-Id: Idac116e9340434334c256acba3866f02bd19827c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 month ago
Joe Tsai	52ef27ab7c	taildrop: fix defer in loop (#13757 ) However, this affects the scope of a defer. Updates #11038 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	1 month ago
Joe Tsai	5b7303817e	syncs: allocate map with Map.WithLock (#13755 ) One primary purpose of WithLock is to mutate the underlying map. However, this can lead to a panic if it happens to be nil. Thus, always allocate a map before passing it to f. Updates tailscale/corp#11038 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	1 month ago
Brad Fitzpatrick	c763b7a7db	syncs: delete Map.Range, update callers to iterators Updates #11038 Change-Id: I2819fed896cc4035aba5e4e141b52c12637373b1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 month ago
Percy Wegmann	2cadb80fb2	util/vizerror: add WrapWithMessage Thus new function allows constructing vizerrors that combine a message appropriate for display to users with a wrapped underlying error. Updates tailscale/corp#23781 Signed-off-by: Percy Wegmann <percy@tailscale.com>	1 month ago
Joe Tsai	910b4e8e6a	syncs: add iterators to Map (#13739 ) Add Keys, Values, and All to iterate over all keys, values, and entries, respectively. Updates #11038 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	1 month ago
Irbe Krumina	89ee6bbdae	cmd/k8s-operator,k8s-operator/apis: set a readiness condition on egress Services for ProxyGroup (#13746 ) cmd/k8s-operator,k8s-operator/apis: set a readiness condition on egress Services Set a readiness condition on ExternalName Services that define a tailnet target to route cluster traffic to via a ProxyGroup's proxies. The condition is set to true if at least one proxy is currently set up to route. Updates tailscale/tailscale#13406 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 month ago
Brad Fitzpatrick	94c79659fa	types/views: add iterators to the three Map view types Their callers using Range are all kinda clunky feeling. Iterators should make them more readable. Updates #12912 Change-Id: I93461eba8e735276fda4a8558a4ae4bfd6c04922 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 month ago
Irbe Krumina	f6d4d03355	cmd/k8s-operator: don't error out if ProxyClass for ProxyGroup not found. (#13736 ) We don't need to error out and continuously reconcile if ProxyClass has not (yet) been created, once it gets created the ProxyGroup reconciler will get triggered. Updates tailscale/tailscale#13406 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 month ago
Irbe Krumina	60011e73b8	cmd/k8s-operator: fix Pod IP selection (#13743 ) Ensure that .status.podIPs is used to select Pod's IP in all reconcilers. Updates tailscale/tailscale#13406 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 month ago
Nick Khyl	da40609abd	util/syspolicy, ipn: add "tailscale debug component-logs" support Fixes #13313 Fixes #12687 Signed-off-by: Nick Khyl <nickk@tailscale.com>	1 month ago
Nick Khyl	29cf59a9b4	util/syspolicy/setting: update Snapshot to use Go 1.23 iterators Updates #12912 Updates #12687 Signed-off-by: Nick Khyl <nickk@tailscale.com>	1 month ago
Tom Proctor	07c157ee9f	cmd/k8s-operator: base ProxyGroup StatefulSet on common proxy.yaml definition (#13714 ) As discussed in #13684, base the ProxyGroup's proxy definitions on the same scaffolding as the existing proxies, as defined in proxy.yaml Updates #13406 Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	1 month ago
Tom Proctor	83efadee9f	kube/egressservices: improve egress ports config readability (#13722 ) Instead of converting our PortMap struct to a string during marshalling for use as a key, convert the whole collection of PortMaps to a list of PortMap objects, which improves the readability of the JSON config while still keeping the data structure we need in the code. Updates #13406 Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	1 month ago
Brad Fitzpatrick	841eaacb07	net/sockstats: quiet some log spam in release builds Updates #13731 Change-Id: Ibee85426827ebb9e43a1c42a9c07c847daa50117 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 month ago
Irbe Krumina	861dc3631c	cmd/{k8s-operator,containerboot},kube/egressservices: fix Pod IP check for dual stack clusters (#13721 ) Currently egress Services for ProxyGroup only work for Pods and Services with IPv4 addresses. Ensure that it works on dual stack clusters by reading proxy Pod's IP from the .status.podIPs list that always contains both IPv4 and IPv6 address (if the Pod has them) rather than .status.podIP that could contain IPv6 only for a dual stack cluster. Updates tailscale/tailscale#13406 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 month ago
Andrew Dunham	8ee7f82bf4	net/netcheck: don't panic if a region has no Nodes Updates #13728 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I1e8319d6b2da013ae48f15113b30c9333e69cc0b	1 month ago
Tom Proctor	36cb2e4e5f	cmd/k8s-operator,k8s-operator: use default ProxyClass if set for ProxyGroup (#13720 ) The default ProxyClass can be set via helm chart or env var, and applies to all proxies that do not otherwise have an explicit ProxyClass set. This ensures proxies created by the new ProxyGroup CRD are consistent with the behaviour of existing proxies Nearby but unrelated changes: * Fix up double error logs (controller runtime logs returned errors) * Fix a couple of variable names Updates #13406 Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	1 month ago
Tom Proctor	cba2e76568	cmd/containerboot: simplify k8s setup logic (#13627 ) Rearrange conditionals to reduce indentation and make it a bit easier to read the logic. Also makes some error message updates for better consistency with the recent decision around capitalising resource names and the upcoming addition of config secrets. Updates #cleanup Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	1 month ago
dependabot[bot]	866714a894	.github: Bump github/codeql-action from 3.26.9 to 3.26.11 (#13710 ) Bumps [github/codeql-action](https://github.com/github/codeql-action) from 3.26.9 to 3.26.11. - [Release notes](https://github.com/github/codeql-action/releases) - [Changelog](https://github.com/github/codeql-action/blob/main/CHANGELOG.md) - [Commits](`461ef6c76d...6db8d6351f`) --- updated-dependencies: - dependency-name: github/codeql-action dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2 months ago
dependabot[bot]	266c14d6ca	.github: Bump actions/cache from 4.0.2 to 4.1.0 (#13711 ) Bumps [actions/cache](https://github.com/actions/cache) from 4.0.2 to 4.1.0. - [Release notes](https://github.com/actions/cache/releases) - [Changelog](https://github.com/actions/cache/blob/main/RELEASES.md) - [Commits](`0c45773b62...2cdf405574`) --- updated-dependencies: - dependency-name: actions/cache dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2 months ago
Nick Hill	9a73462ea4	types/lazy: add DeferredInit type It is sometimes necessary to defer initialization steps until the first actual usage or until certain prerequisites have been met. For example, policy setting and policy source registration should not occur during package initialization. Instead, they should be deferred until the syspolicy package is actually used. Additionally, any errors should be properly handled and reported, rather than causing a panic within the package's init function. In this PR, we add DeferredInit, to facilitate the registration and invocation of deferred initialization functions. Updates #12687 Signed-off-by: Nick Hill <mykola.khyl@gmail.com>	2 months ago
Brad Fitzpatrick	f3de4e96a8	derp: fix omitted word in comment Fix comment just added in `38f236c725`. Updates tailscale/corp#23668 Updates #cleanup Change-Id: Icbe112e24fcccf8c61c759c631ad09f3e5480547 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Irbe Krumina	7f016baa87	cmd/k8s-operator,k8s-operator: create ConfigMap for egress services + small fixes for egress services (#13715 ) cmd/k8s-operator, k8s-operator: create ConfigMap for egress services + small reconciler fixes Updates tailscale/tailscale#13406 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	2 months ago
Brad Fitzpatrick	38f236c725	derp: add server metric for batch write sizes Updates tailscale/corp#23668 Change-Id: Ie6268c4035a3b29fd53c072c5793e4cbba93d031 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Erisa A	c588c36233	types/key: use tlpub: in error message (#13707 ) Fixes tailscale/corp#19442 Signed-off-by: Erisa A <erisa@tailscale.com>	2 months ago
Brad Fitzpatrick	cb10eddc26	tool/gocross: fix argument order to find To avoid warning: find: warning: you have specified the global option -maxdepth after the argument -type, but global options are not positional, i.e., -maxdepth affects tests specified before it as well as those specified after it. Please specify global options before other arguments. Fixes tailscale/corp#23689 Change-Id: I91ee260b295c552c0a029883d5e406733e081478 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Tom Proctor	e48cddfbb3	cmd/{containerboot,k8s-operator},k8s-operator,kube: add ProxyGroup controller (#13684 ) Implements the controller for the new ProxyGroup CRD, designed for running proxies in a high availability configuration. Each proxy gets its own config and state Secret, and its own tailscale node ID. We are currently mounting all of the config secrets into the container, but will stop mounting them and instead read them directly from the kube API once #13578 is implemented. Updates #13406 Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	2 months ago
Brad Fitzpatrick	1005cbc1e4	tailscaleroot: panic if tailscale_go build tag but Go toolchain mismatch Fixes #13527 Change-Id: I05921969a84a303b60d1b3b9227aff9865662831 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Brad Fitzpatrick	c48cc08de2	wgengine: stop conntrack log spam about Canonical net probes Like we do for the ones on iOS. As a bonus, this removes a caller of tsaddr.IsTailscaleIP which we want to revamp/remove soonish. Updates #13687 Change-Id: Iab576a0c48e9005c7844ab52a0aba5ba343b750e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Andrew Dunham	12f1bc7c77	envknob: support disk-based envknobs on the macsys build Per my investigation just now, the $HOME environment variable is unset on the macsys (standalone macOS GUI) variant, but the current working directory is valid. Look for the environment variable file in that location in addition to inside the home directory. Updates #3707 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I481ae2e0d19b316244373e06865e3b5c3a9f3b88	2 months ago
Patrick O'Doherty	4ad3f01225	safeweb: allow passing http.Server in safeweb.Config (#13688 ) Extend safeweb.Config with the ability to pass a http.Server that safeweb will use to server traffic. Updates corp#8207 Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>	2 months ago
kari-ts	8fdffb8da0	hostinfo: update SetPackage doc with new Android values (#13537 ) Fixes tailscale/corp#23283 Signed-off-by: kari-ts <kari@tailscale.com>	2 months ago
Erisa A	f30d85310c	cmd/tailscale/cli: don't print disablement secrets if init fails (#13673 ) * cmd/tailscale/cli: don't print disablement secrets if init fails Fixes tailscale/corp#11355 Signed-off-by: Erisa A <erisa@tailscale.com> * cmd/tailscale/cli: changes from code review Signed-off-by: Erisa A <erisa@tailscale.com> * cmd/tailscale/cli: small grammar change Signed-off-by: Erisa A <erisa@tailscale.com> --------- Signed-off-by: Erisa A <erisa@tailscale.com>	2 months ago
Irbe Krumina	e8bb5d1be5	cmd/{k8s-operator,containerboot},k8s-operator,kube: reconcile ExternalName Services for ProxyGroup (#13635 ) Adds a new reconciler that reconciles ExternalName Services that define a tailnet target that should be exposed to cluster workloads on a ProxyGroup's proxies. The reconciler ensures that for each such service, the config mounted to the proxies is updated with the tailnet target definition and that and EndpointSlice and ClusterIP Service are created for the service. Adds a new reconciler that ensures that as proxy Pods become ready to route traffic to a tailnet target, the EndpointSlice for the target is updated with the Pods' endpoints. Updates tailscale/tailscale#13406 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	2 months ago
Irbe Krumina	9bd158cc09	cmd/containerboot,util/linuxfw: create a SNAT rule for dst/src only once, clean up if needed (#13658 ) The AddSNATRuleForDst rule was adding a new rule each time it was called including: - if a rule already existed - if a rule matching the destination, but with different desired source already existed This was causing issues especially for the in-progress egress HA proxies work, where the rules are now refreshed more frequently, so more redundant rules were being created. This change: - only creates the rule if it doesn't already exist - if a rule for the same dst, but different source is found, delete it - also ensures that egress proxies refresh firewall rules if the node's tailnet IP changes Updates tailscale/tailscale#13406 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	2 months ago
Patrick O'Doherty	a3c6a3a34f	safeweb: add StrictTransportSecurityOptions config (#13679 ) Add the ability to specify Strict-Transport-Security options in response to BrowserMux HTTP requests in safeweb. Updates https://github.com/tailscale/corp/issues/23375 Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>	2 months ago
Brad Fitzpatrick	dc60c8d786	ssh/tailssh: pass window size pixels in IoctlSetWinsize events Fixes #13669 Change-Id: Id44cfbb83183f1bbcbdc38c29238287b9d288707 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago

1 2 3 4 5 ...

8252 Commits (c2144c44a33a373174624ede9f4f6ffe8334cf05) All Branches Search

8252 Commits (c2144c44a33a373174624ede9f4f6ffe8334cf05)

All Branches