529 Commits (bf24e727c856deaf81ee28d1176df26ea702e463)

Author	SHA1	Message	Date
Brad Fitzpatrick	b6f77cc48d	wgengine/magicsock: return early, outdent in derpWriteChanOfAddr	5 years ago
Brad Fitzpatrick	dd31285ad4	wgengine/magicsock: send IPv6 using pconn6, if available ... In prep for IPv6 support. Nothing should make it this far yet.	5 years ago
Brad Fitzpatrick	af277a6762	controlclient, magicsock: add debug knob to request IPv6 endpoints ... Add opt-in method to request IPv6 endpoints from the control plane. For now they should just be skipped. A previous version of this CL was unconditional and reportedly had problems that I can't reproduce. So make it a knob until the mystery is solved. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	221e7d7767	wgengine/magicsock: make log message include DERP port (node)	5 years ago
Brad Fitzpatrick	33bdcabf03	wgengine/magicsock: call stun callback w/ only valid part of STUN packet	5 years ago
David Anderson	0be475ba46	Revert "tailcfg, controlclient, magicsock: request IPv6 endpoints, but ignore them" ... Breaks something deep in wireguard or magicsock's brainstem, no packets at all can flow. All received packets fail decryption with "invalid mac1". This reverts commit 94024355ed. Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	94024355ed	tailcfg, controlclient, magicsock: request IPv6 endpoints, but ignore them ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	60ea635c6d	wgengine/magicsock: delete inaccurate comment ... I meant to include this in the earlier commit.	5 years ago
Brad Fitzpatrick	a184e05290	wgengine/magicsock: listen on udp6, use it for STUN, report endpoint ... More steps towards IPv6 transport. We now send it to tailcontrol, which ignores it. But it doesn't actually actually support IPv6 yet (outside of STUN). Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	7caa288213	wgengine/magicsock: rename pconn field to pconn4, in prep for pconn6	5 years ago
David Crawshaw	addbdce296	wgengine, ipn: include number of active DERPs in status ... Use this when making the ipn state transition from Starting to Running. This way a network of quiet nodes with no active handshaking will still transition to Active. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Crawshaw	1ad78ce698	magicsock: reconnect to home DERP on key change ... Typically the home DERP server is found and set on startup before magicsock's SetPrivateKey can be called, so no DERP connection is established. Make sure one is by kicking the home DERP tires in SetPrivateKey. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Crawshaw	455ba751d9	magicsock: start connection to HOME derp immediately ... The code as written intended to do this, but it repeated the comparison of derpNum and c.myDerp after c.myDerp had been updated, so it never executed. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Anderson	315a5e5355	scripts: add a license header checker. ... Signed-off-by: David Anderson <dave@natulte.net>	5 years ago
Brad Fitzpatrick	db2436c7ff	wgengine/magicsock: don't interrupt endpoint updates, merge all mutex into one ... Before, endpoint updates were constantly being interrupted and resumed on Linux due to tons of LinkChange messages from over-zealous Linux netlink messages (from router_linux.go) Now that endpoint updates are fast and bounded in time anyway, just let them run to completion, but note that another needs to be scheduled after. Now logs went from pages of noise to just: root@taildoc:~# grep -i -E 'stun|endpoint update' log 2020/03/13 08:51:29 magicsock.Conn: starting endpoint update (initial) 2020/03/13 08:51:30 magicsock.Conn.ReSTUN: endpoint update active, need another later ("link-change-minor") 2020/03/13 08:51:31 magicsock.Conn: starting endpoint update (link-change-minor) 2020/03/13 08:51:31 magicsock.Conn.ReSTUN: endpoint update active, need another later ("link-change-minor") 2020/03/13 08:51:33 magicsock.Conn: starting endpoint update (link-change-minor) 2020/03/13 08:51:33 magicsock.Conn.ReSTUN: endpoint update active, need another later ("link-change-minor") 2020/03/13 08:51:35 magicsock.Conn: starting endpoint update (link-change-minor) 2020/03/13 08:51:35 magicsock.Conn.ReSTUN: endpoint update active, need another later ("link-change-minor") Or, seen in another run: 2020/03/13 08:45:41 magicsock.Conn: starting endpoint update (periodic) 2020/03/13 08:46:09 magicsock.Conn: starting endpoint update (periodic) 2020/03/13 08:46:21 magicsock.Conn: starting endpoint update (link-change-major) 2020/03/13 08:46:37 magicsock.Conn: starting endpoint update (periodic) 2020/03/13 08:47:05 magicsock.Conn: starting endpoint update (periodic) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	db31550854	wgengine: don't Reconfig on boring link changes ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	bc73dcf204	wgengine/magicsock: don't block in Send waiting for derphttp.Send ... Fixes #137 Updates #109 Updates #162 Updates #163 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	8807913be9	wgengine/magicsock: wait for previous DERP goroutines to end before new ones ... Updates #109 (hopefully fixes, will wait for graphs to be happy) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	eff6dcdb4e	wgengine/magicsock: log more about why we're re-STUNing	5 years ago
Brad Fitzpatrick	b3ddf51a15	wgengine/magicsock: add a pointer value for logging ... Updates #109 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Crawshaw	7ec54e0064	wgengine/magicsock: remove TODO ... The TODO above derphttp.NewClient suggests it does network I/O, but the derphttp client connects lazily and so creating one is very cheap. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	01b4bec33f	stunner: re-do how Stunner works ... It used to make assumptions based on having Anycast IPs that are super near. Now we're intentionally going to a bunch of different distant IPs to measure latency. Also, optimize how the hairpin detection works. No need to STUN on that socket. Just use that separate socket for sending, once we know the other UDP4 socket's endpoint. The trick is: make our test probe also a STUN packet, so it fits through magicsock's existing STUN routing. This drops netcheck from ~5 seconds to ~250-500ms. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	86baf60bd4	wgengine/magicsock: synchronize epUpdate cleanup on shutdown. ... Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	023df9239e	Move linkstate boring change filtering to magicsock ... So we can at least re-STUN on boring updates. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	a265d7cbff	wgengine/magicsock: in STUN-disabled test mode, let endpoint discovery proceed	5 years ago
Brad Fitzpatrick	5c1e443d34	wgengine/monitor: don't call LinkChange when interfaces look unchanged ... Basically, don't trust the OS-level link monitor to only tell you interesting things. Sanity check it. Also, move the interfaces package into the net directory now that we have it.	5 years ago
Brad Fitzpatrick	39c0ae1dba	derp/derpmap: new DERP config package, merge netcheck into magicsock more ... Fixes #153 Updates #162 Updates #163 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	4800926006	wgengine/magicsock: add AddrSet appendDests+UpdateDst tests	5 years ago
David Anderson	bb93d7aaba	wgengine/magicsock: plumb logf throughout, and expose in Options. ... Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	f42b9b6c9a	wgengine/magicsock: don't discard UDP packet on UDP+DERP race ... Fixes #155 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	f265603110	wgengine/magicsock: fix data race in ReceiveIPv4. ... The UDP reader goroutine was clobbering `n` and `err` from the main goroutine, whose accesses are not synchronized the way `b` is. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	77354d4617	wgengine/magicsock: unblock wireguard-go's read on magicsock shutdown. ... wireguard-go closes magicsock, and expects this to unblock reads so that its internal goroutines can wind down. We were incorrectly blocking the read indefinitey and breaking this contract. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	fdee5fb639	wgengine/magicsock: don't mutexly reach inside Conn to tweak DERP settings. ... Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	61d83f759b	wgengine/magicsock: remove redundant derpMagicIP comparison ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	ef31dd7bb5	wgengine/magicsock: check all 3 fast paths independently. ... The previous code would skip the DERP short-circuit if roamAddr was set, which is not what we wanted. More generally, hitting any of the fast path conditions is a direct return, so we can just have 3 standalone branches rather than 'else if' stuff. Signed-Off-By: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	05a52746a4	wgengine/magicsock: fix destination selection logic to work with DERP. ... The effect is subtle: when we're not spraying packets, and have not yet figured out a curAddr, and we're not spraying, we end up sending to whatever the first IP is in the iteration order. In English, that means "when we have no idea where to send packets, and we've given up on sending to everyone, just send to the first addr we see in the list." This is, in general, what we want, because the addrs are in sorted preference order, low to high, and DERP is the least preferred destination. So, when we have no idea where to send, send to DERP, right? ... Except for very historical reasons, appendDests iterated through addresses in _reverse_ order, most preferred to least preferred. crawshaw@ believes this was part of the earliest handshaking algorithm magicsock had, where it slowly iterated through possible destinations and poked handshakes to them one at a time. Anyway, because of this historical reverse iteration, in the case described above of "we have no idea where to send", the code would end up sending to the _most_ preferred candidate address, rather than the _least_ preferred. So when in doubt, we'd end up firing packets into the blackhole of some LAN address that doesn't work, and connectivity would not work. This case only comes up if all your non-DERP connectivity options have failed, so we more or less failed to detect it because we didn't have a pathological test box deployed. Worse, codependent bug 2839854994 made DERP accidentally work sometimes anyway by incorrectly exploiting roamAddr behavior, albeit at the cost of making DERP traffic symmetric. In fixing DERP to once again be asymmetric, we effectively removed the bandaid that was concealing this bug. Signed-Off-By: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	97e58ad44d	wgengine/magicsock: only set addrByKey once in CreateEndpoint. ... Signed-Off-By: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	fbab12c94c	wgengine/magicsock: skip netcheck if external STUN aren't in use ... Updates #146 (not a complete fix yet probably)	5 years ago
Brad Fitzpatrick	fe0051fafd	wgengine/magicsock: expand AddrSet.addrs comment	5 years ago
David Anderson	2839854994	wgengine/magicsock: never set a DERP server as a roamAddr. ... DERP traffic is asymmetric by design, with nodes always sending to their peer's home DERP server. However, if roamAddr is set, magicsock will always push data there, rather than let DERP server selection do its thing, so we end up accidentally creating a symmetric flow. Signed-Off-By: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	4f5c0da1ae	wgengine/magicsock: log when home DERP server changes.	5 years ago
Brad Fitzpatrick	6978b93bdd	derp, magicsock: track home (preferred) vs visiting connections for stats	5 years ago
Brad Fitzpatrick	12b77f30ad	wgengine/magicsock: close stale DERP connections	5 years ago
Brad Fitzpatrick	2cff9016e4	net/dnscache: add overly simplistic DNS cache package for selective use ... I started to write a full DNS caching resolver and I realized it was overkill and wouldn't work on Windows even in Go 1.14 yet, so I'm doing this tiny one instead for now, just for all our netcheck STUN derp lookups, and connections to DERP servers. (This will be caching a exactly 8 DNS entries, all ours.) Fixes #145 (can be better later, of course)	5 years ago
Brad Fitzpatrick	a36ccb8525	wgengine/magicsock: actually add to the activeDerp map ... Fixes bug just introduced in 8f9849c140; not tested enough :(	5 years ago
Brad Fitzpatrick	8f9849c140	wgengine/magicsock: collapse three DERP maps down into one	5 years ago
Brad Fitzpatrick	40ebba1373	magicsock: use [unexpected] convention more ... Fixes #136 (not entirely, but we have a convention now)	5 years ago
Brad Fitzpatrick	848a2bddf0	wgengine/magicsock: update set of DERP nodes	5 years ago
David Crawshaw	7932481b95	magicsock: lookup AddrSet by key from DERP ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	eac62ec5ff	ipn, wgengine/magicsock: add ipn.Prefs.DisableDERP bool ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	bf704a5218	derp: protocol negotiation, add v2: send src pub keys to clients in packets ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Crawshaw	a33419167b	magicsock: plumb through derpTLSConfig variable (for testing) ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Crawshaw	34859f8e7d	wgengine, magicsock: add a CreateBind method ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	b27d4c017a	magicsock, wgengine, ipn, controlclient: plumb regular netchecks to map poll ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	724c37fb41	wgengine/magicsock: start tracking nearest DERP node	5 years ago
Brad Fitzpatrick	4675c70464	wgengine/magicsock: check STUN regularly	5 years ago
Brad Fitzpatrick	bc7bc43fb8	magicsock, interfaces: move some code from magicsock to interfaces	5 years ago
Brad Fitzpatrick	af7a01d6f0	wgengine/magicsock: drop donec channel, rename epUpdateCtx to serve its purpose	5 years ago
David Crawshaw	cc4afa775f	magicsock: rate limit send error log messages ... The x/time/rate dependency adds 24kb to tailscaled binary size. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Crawshaw	0752c77dc2	magicsock: keep DERP magic IPs out of the address map ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
David Crawshaw	c6550135d5	magicsock: remove the index from indexedAddrs ... The value predates the introduction of AddrSet which replaces the index by tracking curAddr directly. Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	1abf2da392	wgengine/magicsock: reset favorite address on handshakes ... Updates #92 (not a complete fix; could be better/faster?) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	67ede8d6d2	wgengine, magicsock: fix SetPrivateKey data race ... Updates #112 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	c185e6b4b0	stunner: support IPv6, add latency info to callbacks, use unique TxIDs per retry ... And some more docs. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Crawshaw	a6ad3c46e2	magicsock: spray some normal packets after a handshake ... In particular, this is designed to catch the case where a HandshakeInitiation packet is sent out but the intermediate NATs have not been primed, so the packet passes over DERP. In that case, the HandshakeResponse also comes back over DERP, and the connection proceeds via DERP without ever trying to punch through the NAT. With this change, the HandshakeResponse (which was sprayed out and so primed one NAT) triggers an UpdateDst, which triggers the extra spray logic. (For this to work, there has to be an initial supply of packets to send on to a peer for the three seconds following a handshake. The source of these packets is left as a future exercise.) Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	8696b17b5f	wgengine/magicsock: turn off DERP log spamminess by default ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	7a3b91390b	wgengine/magicsock: fix crash in Send when Endpoint isn't an AddrSet ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Crawshaw	868cfae84f	wgengine, magicsock: adjust for wireguard-go conn/device package split ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Brad Fitzpatrick	cc7b9b0dff	control/controlclient: fix priority of DERP server, add comment	5 years ago
Brad Fitzpatrick	c02f4b5a1f	control/controlclient: add temporary mechanism to force derp on ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	525bf1f3d2	wgengine/magicsock: remember fixed port number preference ... So LinkChange events rebind to the same port when possible.	5 years ago
Brad Fitzpatrick	379a3125fd	derp, wgengine/magicsock: support more than just packets from Client.Recv ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	d298d5b1f8	wgengine/magicsock: support multiple derp servers, and not just for handshakes ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	fd1aa4f7f6	wgengine/magicsock: add a reSTUN method ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	e06ca40650	wgengine, magicsock, derp: misc cleanups, docs ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	259406e797	derp: move away from [32]byte key types ... And some minor cleanup in the process. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	587c3fcac4	control/controlclient, wgengine/magicsock: misc cleanups ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Crawshaw	87334fb332	wgengine, controlclient: fewer pointers in wgcfg key types ... Signed-off-by: David Crawshaw <david@zentus.com>	5 years ago
Earl Lee	a8d8b8719a	Move Linux client & common packages into a public repo.	5 years ago