Commit Graph

1846 Commits (b4cf837d8adc447233bac47e3425d5a3bcda87a5)
 

Author SHA1 Message Date
Avery Pennarun a496cdc943 router_linux: remove need for iptables.ListChains().
Instead of retrieving the list of chains, or the list of rules in a
chain, just try deleting the ones we don't want and then adding the
ones we do want. An error in flushing/deleting still means the rule
doesn't exist anymore, so there was no need to check for it first.

This avoids the need to parse iptables output, which avoids the need to
ever call iptables -S, which fixes #403, among other things. It's also
much more future proof in case the iptables command line changes.

Unfortunately the iptables go module doesn't properly pass the iptables
command exit code back up when doing .Delete(), so we can't correctly
check the exit code there. (exit code 1 really means the rule didn't
exist, rather than some other weird problem).

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun 8a6bd21baf router_linux: extract process runner routines into runner.go.
These will probably be useful across platforms. They're not really
Linux-specific at all.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun 34c30eaea0 router_linux: use only baseline 'ip rule' features that exist in old kernels.
This removes the use of suppress_ifgroup and fwmark "x/y" notation,
which are, among other things, not available in busybox and centos6.

We also use the return codes from the 'ip' program instead of trying to
parse its output.

I also had to remove the previous hack that routed all of 100.64.0.0/10
by default, because that would add the /10 route into the 'main' route
table instead of the new table 88, which is no good. It was a terrible
hack anyway; if we wanted to capture that route, we should have
captured it explicitly as a subnet route, not as part of the addr. Note
however that this change affects all platforms, so hopefully there
won't be any surprises elsewhere.

Fixes #405
Updates #320, #144

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun 85d93fc4e3 cmd/tailscale: make ip_forward warnings more actionable.
Let's actually list the file we checked
(/proc/sys/net/ipv4/ip_forward). That gives the admin something
specific to look for when they get this message.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun 99aa33469e cmd/tailscale: be quiet when no interaction or errors are needed.
We would print a message about "nothing more to do", which some people
thought was an error or warning. Let's only print a message after
authenticating if we previously asked for interaction, and let's
shorten that message to just "Success," which is what it means.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun 30e5c19214 magicsock: work around race condition initializing .Regions[].
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun 7cd9ff3dde net/netcheck: fix race condition initializting RegionLatency maps.
Under some conditions, code would try to look things up in the maps
before the first call to updateLatency. I don't see any reason to delay
initialization of the maps, so let's just init them right away when
creating the Report instance.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun 5eb09c8f5e filch_test: clarify the use of os.RemoveAll().
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Brad Fitzpatrick afb9c6a6ab control/controlclient: use "getprop net.hostname" for Android hostname
Updates #409
5 years ago
David Anderson 2b74236567 ipn: move e2e_test back to corp repo.
It depends on corp things, so can't run here anyway.

Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
David Anderson 557b310e67 control/controlclient: move auto_test back to corp repo.
It can't run without corp stuff anyway, and makes it harder to
refactor the control server.
5 years ago
Dmytro Shynkevych 737124ef70 tstun: tolerate zero reads
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
5 years ago
David Anderson 7317e73bf4 control/controlclient: move direct_test back to corp repo.
It can only be built with corp deps anyway, and having it split
from the control code makes our lives harder.

Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Dmytro Shynkevych 7508b67c54 cmd/tailscale: expose --enable-derp
Signed-off-by: Dmytro Shynkevych <dm.shynk@gmail.com>
5 years ago
Brad Fitzpatrick 703d789005 tailcfg: add MapResponse.Debug mechanism to trigger logging heap pprof
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick b0c10fa610 stun, netcheck: move under net 5 years ago
Brad Fitzpatrick 43ded2b581 wgengine/packet: add some tests, more docs, minor Go style, performance changes 5 years ago
Brad Fitzpatrick 3f4a567032 types/strbuilder: add a variant of strings.Builder that uses sync.Pool
... and thus does not need to worry about when it escapes into
unprovable fmt interface{} land.

Also, add some convenience methods for efficiently writing integers.
5 years ago
Brad Fitzpatrick e6b84f2159 all: make client use server-provided DERP map, add DERP region support
Instead of hard-coding the DERP map (except for cmd/tailscale netcheck
for now), get it from the control server at runtime.

And make the DERP map support multiple nodes per region with clients
picking the first one that's available. (The server will balance the
order presented to clients for load balancing)

This deletes the stunner package, merging it into the netcheck package
instead, to minimize all the config hooks that would've been
required.

Also fix some test flakes & races.

Fixes #387 (Don't hard-code the DERP map)
Updates #388 (Add DERP region support)
Fixes #399 (wgengine: flaky tests)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
David Anderson e8b3a5e7a1 wgengine/filter: implement a destination IP pre-filter.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Brad Fitzpatrick 35a8586f7e go.sum: go mod tidy 5 years ago
Avery Pennarun 3ed2124356 ipn: Resolve some resource leaks in test.
Updates tailscale/corp#255.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun ea8f92b312 ipn/local: get rid of some straggling calls to the log module.
Use b.logf() instead.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun af9328c1b7 log rate limiting: reformat limiter messages, and use nonempty burst size.
- Reformat the warning about a message being rate limited to print the
  format string, rather than the formatted message. This helps give a
  clue what "type" of message is being limited.

- Change the rate limit warning to be [RATE LIMITED] in all caps. This
  uses less space on each line, plus is more noticeable.

- In tailscaled, change the frequency to be less often (once every 5
  seconds per format string) but to allow bursts of up to 5 messages.
  This greatly reduces the number of messages that are rate limited
  during startup, but allows us to tighten the limit even further during
  normal runtime.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun f2db4ac277 cmd/tailscaled: SetGCPercent() if GOGC is not set.
This cuts RSS from ~30MB to ~20MB on my machine, after the previous fix
to get rid of unnecessary zstd buffers.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun db051fb013 ipnserver and logpolicy: configure zstd with low-memory settings.
The compressed blobs we send back and forth are small and infrequent,
which doesn't justify the 8MB * GOMAXPROCS memory that was being
allocated. This was the overwhelming majority of memory use in
tailscaled. On my system it goes from ~100M RSS to ~15M RSS (which is
still suspiciously high, but we can worry about that more later).

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun d074ec6571 cmd/tailscaled: eliminate unnecessary use of an init() function.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun c5fcc38bf1 controlclient tests: fix more memory leaks and add resource checking.
I can now run these tests with -count=1000 without running out of RAM.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun d03de31404 controlclient/direct: fix a race condition accessing auth keys.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun 1013cda799 controlclient/auto_test: don't print the s.control object.
This contains atomic ints that trigger a race check error if we access
them non-atomically.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun 806de4ac94 portlist: fix "readdirent: no such file or directory" errors on Linux.
This could happen when a process disappeared while we were reading its
file descriptor list.

I was able to replicate the problem by running this in another
terminal:

    while :; do for i in $(seq 10); do
      /bin/true & done >&/dev/null; wait >&/dev/null;
    done

And then running the portlist tests thousands of times.

Fixes #339.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
David Anderson c97c45f268 ipn: sprinkle documentation and clarity rewrites through LocalBackend.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
David Anderson 39d20e8a75 go.mod: bump wireguard-go version. 5 years ago
David Anderson cd2f6679bb go.mod: bump wireguard-go version.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
David Anderson 7fb33123d3 wgengine/router: warn about another variation of busybox's `ip`.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Wendi Yu bb55694c95
wgengine: log node IDs when peers are added/removed (#381)
Also stop logging data sent/received from nodes we're not connected to (ie all those `x`s being logged in the `peers: ` line)
Signed-off-by: Wendi <wendi.yu@yahoo.ca>
5 years ago
Dmytro Shynkevych 635f7b99f1 wgengine: pass tun.NativeDevice to router
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
5 years ago
David Anderson 9c914dc7dd wgengine/router: stop using -m comment.
The comment module is compiled out on several embedded systems (and
also gentoo, because netfilter can't go brrrr with comments holding it
back). Attempting to use comments results in a confusing error, and a
non-functional firewall.

Additionally, make the legacy rule cleanup non-fatal, because we *do*
have to probe for the existence of these -m comment rules, and doing
so will error out on these systems.

Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
David Anderson 3e27b3c33c wgengine/router: more comments.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
David Anderson 0fe262f093 ipn: plumb NetfilterMode all the way out to the CLI.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
David Anderson c67c8913c3 wgengine/router: add a test for linux router state transitions.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
David Anderson 292606a975 wgengine/router: support multiple levels of netfilter involvement.
Signed-off-by: David Anderson <danderson@tailscale.com>
5 years ago
Brad Fitzpatrick cff53c6e6d tailcfg: add DERP map structures
Updates #387
Updates #388

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
5 years ago
Brad Fitzpatrick 5ec7ac1d02 tstest: document PanicOnLog 5 years ago
Brad Fitzpatrick e6d0c92b1d wgengine/magicsock: clean up earlier fix a bit
Move WaitReady from fc88e34f42 into the
test code, and keep the derp-reading goroutine named for debugging.
5 years ago
Avery Pennarun d0754760e7 controlclient/auto_test: fix flake "peer OS is not linux" on macOS.
We were mis-counting the number of Synchronized messages that we should
have been generating.
5 years ago
Avery Pennarun 8f8607b6bf control/controlclient/auto_test: clean up logging to defeat 'go test' idiocy.
By default, nothing differentiates errors or fatals from regular logs, so they just
blend into the rest of the logs.

As a bonus, if you run a test using t.Run(), the log messages printed
via the sub-t.Run() are printed at a different time from log messages
printed via the parent t.Run(), making debugging almost impossible.

This doesn't actually fix the test flake I'm looking for, but at least
I can find it in the logs now.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago
Avery Pennarun d53e8fc0da router_darwin_support: we can build this on every platform.
Our new build scripts try to build ipn-go-bridge on more than just
linux and darwin, so let's enable this file so it can be successful on
every platform.
5 years ago
Avery Pennarun 3b1ce30967 Merge branch 'master' of github.com:tailscale/tailscale
* 'master' of github.com:tailscale/tailscale:
  derp/derphttp: don't use x/net/proxy for SOCKS on iOS
5 years ago
Avery Pennarun 286f96e412 control/controlclient: fix a very rare httptest.Server log.Printf.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
5 years ago