tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	8efc306e4f	net/interfaces: assume the network's up on js/wasm Updates #3157 Change-Id: If4acd33598ad5e8ef7fb5960964c9ac32bc8f68b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	4a3e2842d9	net/interfaces: add List, GetList And start moving funcs to methods on List. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	2501a694cb	net/interfaces: add RegisterInterfaceGetter for Android Updates #2293 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Matt Layher	effee49e45	net/interfaces: explicitly check netaddr.IP.Is6 in isUsableV6 Signed-off-by: Matt Layher <mdlayher@gmail.com>	3 years ago
Matt Layher	3ff8a55fa7	net/tsaddr: remove IsULA, replace with netaddr.IP.IsPrivate Signed-off-by: Matt Layher <mdlayher@gmail.com>	3 years ago
Brad Fitzpatrick	aaf2df7ab1	net/{dnscache,interfaces}: use netaddr.IP.IsPrivate, delete copied code Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Crawshaw	d6f4b5f5cb	ipn, etc: use controlplane.tailscale.com Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Denton Gentry	ad288baaea	net/interfaces: use IPv4 link local if nothing better The only connectivity an AWS Lambda container has is an IPv4 link-local 169.254.x.x address using NAT: 12: vtarget_1@if11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 7e:1c:3f:00:00:00 brd ff:ff:ff:ff:ff:ff link-netnsid 1 inet 169.254.79.1/32 scope global vtarget_1 valid_lft forever preferred_lft forever If there are no other IPv4/v6 addresses available, and we are running in AWS Lambda, allow IPv4 169.254.x.x addresses to be used. ---- Similarly, a Google Cloud Run container's only connectivity is a Unique Local Address fddf:3978:feb1:d745::c001/128. If there are no other addresses available then allow IPv6 Unique Local Addresses to be used. We actually did this in an earlier release, but now refactor it to work the same way as the IPv4 link-local support is being done. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Brad Fitzpatrick	1ae35b6c59	net/{interfaces,netcheck}: rename some fields, funcs Split out of Denton's #2164, to make that diff smaller to review. This change has no behavior changes. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w(.)\.Port = (.) -> $1 = $1.WithPort($2) \w(.)\.IP = (.) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	72b6d98298	net/interfaces: return all Tailscale addresses from Tailscale(). Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Denton Gentry	54ba6194f7	interfaces: allow IPv6 ULA as a valid address. IPv6 Unique Local Addresses are sometimes used with Network Prefix Translation to reach the Internet. In that respect their use is similar to the private IPv4 address ranges 10/8, 172.16/12, and 192.168/16. Treat them as sufficient for AnyInterfaceUp(), but specifically exclude Tailscale's own IPv6 ULA prefix to avoid mistakenly trying to bootstrap Tailscale using Tailscale. This helps in supporting Google Cloud Run, where the addresses are 169.254.8.1/32 and fddf:3978:feb1:d745::c001/128 on eth1. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Brad Fitzpatrick	7f174e84e6	net/interfaces: remove mutating methods, add EqualFiltered instead Now callers (wgengine/monitor) don't need to mutate the state to remove boring interfaces before calling State.Equal. Instead, the methods to remove boring interfaces from the State are removed, as is the reflect-using Equal method itself, and in their place is a new EqualFiltered method that takes a func predicate to match interfaces to compare. And then the FilterInteresting predicate is added for use with EqualFiltered to do the job that that wgengine/monitor previously wanted. Now wgengine/monitor can keep the full interface state around, including the "boring" interfaces, which we'll need for peerapi on macOS/iOS to bind to the interface index of the utunN device. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	7dc88e4c1e	net/interfaces: track more interface metadata in State We have it already but threw it away. But macOS/iOS code will be needing the interface index, so hang on to it. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	d5fd373f09	net/interfaces: skip IPv6 link-local interfaces like we do for IPv4 We strip them control-side anyway, and we already strip IPv4 link local, so there's no point uploading them. And iOS has a ton of them, which results in somewhat silly amount of traffic in the MapRequest. We'll be doing same-LAN-inter-tailscaled link-local traffic a different way, with same-LAN discovery. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	fee74e7ea7	net/interfaces, wgengine/monitor: fix false positives link changes interfaces.State.String tries to print a concise summary of the network state, removing any interfaces that don't have any or any interesting IP addresses. On macOS and iOS, for instance, there are a ton of misc things. But the link monitor based its are-there-changes decision on interfaces.State.Equal, which just used reflect.DeepEqual, including comparing all the boring interfaces. On macOS, when turning wifi on or off, there are a ton of misc boring interface changes, resulting in hitting an earlier check I'd added on suspicion this was happening: [unexpected] network state changed, but stringification didn't This fixes that by instead adding a new interfaces.State.RemoveUninterestingInterfacesAndAddresses method that does, uh, that. Then use that in the monitor. So then when Equal is used later, it's DeepEqualing the already-cleaned version with only interesting interfaces. This makes cmd/tailscaled debug --monitor much less noisy. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	829eb8363a	net/interfaces: sort returned addresses from LocalAddresses Also change the type to netaddr.IP while here, because it made sorting easier. Updates tailscale/corp#1397 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	f647e3daaf	ipn/ipnlocal: transform default routes into "all but LAN" routes. Fixes #1177. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	000b80de9d	net/interfaces: go idle on macOS when wifi/etc is down, ignore utun* interfaces Updates tailscale/corp#1289 Updates tailscale/corp#1367 Updates tailscale/corp#1378 Updates tailscale/felicity#4	4 years ago
Brad Fitzpatrick	20e66c5b92	net/interfaces: reconcile interface filtering with address printing in logs The interface.State logging tried to only log interfaces which had interesting IPs, but the what-is-interesting checks differed between the code that gathered the interface names to print and the printing of their addresses.	4 years ago
Brad Fitzpatrick	35e10c78fc	net/interfaces: don't send over zt* interfaces Fixes #1208 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	692a011b54	net/interfaces: remove IsTailscaleIP, make callers use tsaddr. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	baa7937998	net/interfaces: return IPv6 addresses from LocalAddresses. In practice, we already provide IPv6 endpoint addresses via netcheck, and that address is likely to match a local address anyway (i.e. no NAT66). The comment at that piece of the code mentions needing to figure out a good priority ordering, but that only applies to non-active-discovery clients, who already don't do anything with IPv6 addresses. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	6ee219a25d	ipn, wgengine, magicsock, tsdns: be quieter and less aggressive when offline If no interfaces are up, calm down and stop spamming so much. It was noticed as especially bad on Windows, but probably was bad everywhere. I just have the best network conditions testing on a Windows VM. Updates #604	4 years ago
Brad Fitzpatrick	587bdc4280	ipn, wgengine: disable subnet routes if network has PAC configuration Not configurable yet. Updates tailscale/corp#653 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ed5d5f920f	net/interfaces: add interfaces.State.String method	4 years ago
Brad Fitzpatrick	8051ecff55	net/interfaces: add State.PAC field, populate it on Windows Not used for anything yet (except logging), but populate the current proxy autoconfig PAC URL in Interfaces.State. A future change will do things based on it.	4 years ago
Brad Fitzpatrick	c5eb57f4d6	net/tshttpproxy: new package, support WPAD/PAC proxies on Windows Updates tailscale/corp#553 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	dbb4c246fa	wgengine/monitor: add Windows linkchange monitor Updates tailscale/corp#553 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	b97aac1718	net/interfaces: include DefaultRouteInterface in interfaces.State And log it in wgengine on change. Changing bug in #643. Updates #643	4 years ago
Brad Fitzpatrick	742b8b44a8	net/tsaddr: new package to hold Tailscale-specific IPs/ranges And update existing callers with (near) duplicated cases.	4 years ago
Brad Fitzpatrick	5c6d8e3053	netcheck, tailcfg, interfaces, magicsock: survey UPnP, NAT-PMP, PCP Don't do anything with UPnP, NAT-PMP, PCP yet, but see how common they are in the wild. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	32156330a8	net/interfaces: add func LikelyHomeRouterIP For discovering where we might direct NAT-PMP/PCP/UPnP queries at in the future.	4 years ago
Brad Fitzpatrick	0245bbe97b	Make netcheck handle v6-only interfaces better, faster. Also: * add -verbose flag to cmd/tailscale netcheck * remove some API from the interfaces package * convert some of the interfaces package to netaddr.IP * don't even send IPv4 probes on machines with no IPv4 (or only v4 loopback) * and once three regions have replied, stop waiting for other probes at 2x the slowest duration. Updates #376	5 years ago
Brad Fitzpatrick	c0697e1feb	net/interfaces: add IsExpensive and up state to State Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	a4ef345737	cmd/tailscale: add status subcommand Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	023df9239e	Move linkstate boring change filtering to magicsock So we can at least re-STUN on boring updates. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	5c1e443d34	wgengine/monitor: don't call LinkChange when interfaces look unchanged Basically, don't trust the OS-level link monitor to only tell you interesting things. Sanity check it. Also, move the interfaces package into the net directory now that we have it.	5 years ago

38 Commits (9a217ec841bee588b59f45e5177dccc72a05975c)