3942 Commits (89832c1a95353559f42c27e4f843358d7a4ae098)

 

All Branches   

Search

Author	SHA1	Message	Date
Brad Fitzpatrick	89832c1a95	tailcfg: fix typo in SessionDuration field name ... Noted by @danderson. Updates #3802 Change-Id: Ide15f3f28e30f6abb5c94d7dcd218bd9482752a0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	695f8a1d7e	ssh/tailssh: add support for sftp ... Updates #3802 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	53588f632d	Revert "wgengine/router,util/kmod: load & log xt_mark" ... This reverts commit 8d6793fd70. Reason: breaks Android build (cgo/pthreads addition) We can try again next cycle. Change-Id: I5e7e1730a8bf399a8acfce546a6d22e11fb835d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Tom DNetto	df26c63793	net/dns/resolver, net/tsaddr: fix reverse lookups in 4to6 IP range ... Fixes #4439 Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
James Tucker	8d6793fd70	wgengine/router,util/kmod: load & log xt_mark ... Attempt to load the xt_mark kernel module when it is not present. If the load fails, log error information. It may be tempting to promote this failure to an error once it has been in use for some time, so as to avoid reaching an error with the iptables invocation, however, there are conditions under which the two stages may disagree - this change adds more useful breadcrumbs. Example new output from tailscaled running under my WSL2: ``` router: ensure module xt_mark: "/usr/sbin/modprobe xt_mark" failed: exit status 1; modprobe: FATAL: Module xt_mark not found in directory /lib/modules/5.10.43.3-microsoft-standard-WSL2 ``` Background: There are two places to lookup modules, one is `/proc/modules` "old", the other is `/sys/module/` "new". There was query_modules(2) in linux <2.6, alas, it is gone. In a docker container in the default configuration, you would get /proc/modules and /sys/module/ both populated. lsmod may work file, modprobe will fail with EPERM at `finit_module()` for an unpriviliged container. In a priviliged container the load may *succeed*, if some conditions are met. This condition should be avoided, but the code landing in this change does not attempt to avoid this scenario as it is both difficult to detect, and has a very uncertain impact. In an nspawn container `/proc/modules` is populated, but `/sys/module` does not exist. Modern `lsmod` versions will fail to gather most module information, without sysfs being populated with module information. In WSL2 modules are likely missing, as the in-use kernel typically is not provided by the distribution filesystem, and WSL does not mount in a module filesystem of its own. Notably the WSL2 kernel supports iptables marks without listing the xt_mark module in /sys/module, and /proc/modules is empty. On a recent kernel, we can ask the capabilities system about SYS_MODULE, that will help to disambiguate between the non-privileged container case and just being root. On older kernels these calls may fail. Update #4329 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	f7cb6630e7	tailcfg: document SSHPrincipal.PubKeys URL expansions ... From f74ee80abe which lacked docs. Updates #3802 Change-Id: Ia7df05a486ae383cc6d9aca9dfe487b04e243ad5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	5b4154342e	ssh/tailssh: fix double SSH-2.0- prefix in greeting banner ... gliderlabs/ssh was already adding the "SSH-2.0-" prefix. Updates #3802 Change-Id: I19a1cd9308371a2898e7883cf26e94c9b54bab29 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7a097ccc83	ipn/ipnlocal: close peerapi listeners on LocalBackend.Shutdown ... For tests. Now that we can always listen (whereas we used to fail prior to a2c330c496), some goroutine leak checks were failing in tests in another repo after that change. Change-Id: Id95a4b71167eca61962a48616d79741b9991e0bc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	2b8b887d55	ssh/tailssh: send banner messages during auth, move more to conn ... (VSCode Live Share between Brad & Maisem!) Updates #3802 Change-Id: Id8edca4481b0811debfdf56d4ccb1a46f71dd6d3 Co-Authored-By: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Denton Gentry	13f75b9667	scripts/install: add Alma Linux. ... Tested using an Alma Linux 8.5 VM. Updates https://github.com/tailscale/tailscale/issues/2915 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	c2b907c965	scripts/installer: support LinuxMint Debian. ... The primary distribution for LinuxMint is based on Ubuntu, but there is an alternate Debian-based distribution called LMDE. Both variations identify themselves as "linuxmint" We added UBUNTU_VERSION to the Ubuntu handling for linuxmint, the only distribution so far found to do this. Instead, split linuxmint out into its own case and use either UBUNTU_VERSION or DEBIAN_VERSION, whichever is present. Tested on an LMDE 5 (elsie) VM. Updates https://github.com/tailscale/tailscale/issues/2915 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	61868f281e	scripts/installer: call emerge with --ask=n ... Fixes https://github.com/tailscale/tailscale/issues/4354 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Denton Gentry	db7da6622a	scripts/installer: add ParrotOS support ... Support ParrotSec https://parrotsec.org/ Tested using a Parrot 5.0 VM. Updates https://github.com/tailscale/tailscale/issues/2915 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Brad Fitzpatrick	d413850bd7	cmd/tailscale: add "debug via" subcommand to do CIDR math for via ranges ... $ tailscale debug via 0xb 10.2.0.0/16 fd7a:115c:a1e0:b1a:0🅱️a02:0/112 $ tailscale debug via fd7a:115c:a1e0:b1a:0🅱️a02:0/112 site 11 (0xb), 10.2.0.0/16 Previously: 3ae701f0eb This adds a little debug tool to do CIDR math to make converting between those ranges easier for now. Updates #3616 Change-Id: I98302e95d17765bfaced3ecbb71cbd43e84bff46 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f74ee80abe	ssh/tailssh: support expansions in public key fetch URL too ... Updates #3802 Change-Id: I5aa98bdab14fd1c1c00ba63b93f8d7e670f72437 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	14d077fc3a	ssh/tailssh: terminate ssh auth early if no policy can match ... Also bump github.com/tailscale/golang-x-crypto/ssh Updates #3802 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	a2c330c496	ipn/ipnlocal: use the fake peerapi listener as fallback if netstack available ... The previous commit (1b89662eff) this for Android, but we can also use this on any platform if we we would otherwise fail. Change-Id: I4cd78b40e9e77fca5cc8e717dd48ac173101bed4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	136f30fc92	wgengine/monitor: split the unexpected stringification log line ... It unfortuantely gets truncated because it's too long, split it into 3 different log lines to circumvent truncation. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	8e40bfc6ea	wgengine/monitor: ignore OS-specific uninteresting interfaces ... Currently we ignore these interfaces in the darwin osMon but then would consider it interesting when checking if anything had changed. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	1b89662eff	ipn/ipnlocal: make peerapi listener on Android avoid the kernel ... We intercept the peerapi port in netstack anyway, so there's no reason the linux kernel on Android needs to know about it. It's only getting in the way and causing problems for reasons we don't fully understand. But we don't even need to understand it because it's not relevant anymore. Instead, provide a dummy net.Listener that just sits and blocks to pacify the rest of the code that assumes it can be stuck in a Listener.Accept call and call Listener.Close and Listener.Addr. We'll likely do this for all platforms in the future, if/when we also link in netstack on iOS. Updates #4449 Updates #4293 Updates #3986 Change-Id: Ic2d3fe2f3cee60fc527356a3368830f17aeb75ae Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	cf9b9a7fec	tstest/iosdeps: add test for forbidden iOS dependencies ... Fixes #4463 Change-Id: I8305710e8a075263ae9a88a29624b19032d5beeb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	8b81254992	ipn/ipnlocal: reject tailscale up --ssh if disabled on tailnet ... Updates #3802 Change-Id: I3f1e839391fe9b28270f506f4bb8d8e3d36716f5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	0ce67ccda6	wgengine/router: make supportsV6NAT check catch more cases ... Updates #4459 Change-Id: Ic27621569d2739298e652769d10e38608c6012be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Xe Iaso	fc2f628d4c	cmd/nginx-auth: maintainer scripts and tailnet checking (#4460) ... * cmd/nginx-auth: add maintainer scripts Signed-off-by: Xe <xe@tailscale.com> * cmd/nginx-auth: add Expected-Tailnet header and documentation Signed-off-by: Xe <xe@tailscale.com>	3 years ago
Blake Mizerany	33fa43252e	cmd/proxy-to-grafana: prevent premature termination ... This commit changes proxy-to-grafana to report errors while polling for tailscaled status instead of terminating at the first sign of an error. This allows tailscale some time to come up before the proxy decides to give up. Signed-off-by: Blake Mizerany <blake.mizerany@gmail.com>	3 years ago
Tom DNetto	c8f4dfc8c0	derp/derphttp,net/netcheck: improve netcheck behavior under MITM proxies ... In cases where tailscale is operating behind a MITM proxy, we need to consider that a lot more of the internals of our HTTP requests are visible and may be used as part of authorization checks. As such, we need to 'behave' as closely as possible to ideal. - Some proxies do authorization or consistency checks based the on Host header or HTTP URI, instead of just the IP/hostname/SNI. As such, we need to construct a `*http.Request` with a valid URI everytime HTTP is going to be used on the wire, even if its over TLS. Aside from the singular instance in net/netcheck, I couldn't find anywhere else a http.Request was constructed incorrectly. - Some proxies may deny requests, typically by returning a 403 status code. We should not consider these requests as a valid latency check, so netcheck semantics have been updated to consider >299 status codes as a failed probe. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Brad Fitzpatrick	cc575fe4d6	net/dns: schedule DoH upgrade explicitly, fix Resolver.Addr confusion ... Two changes in one: * make DoH upgrades an explicitly scheduled send earlier, when we come up with the resolvers-and-delay send plan. Previously we were getting e.g. four Google DNS IPs and then spreading them out in time (for back when we only did UDP) but then later we added DoH upgrading at the UDP packet layer, which resulted in sometimes multiple DoH queries to the same provider running (each doing happy eyeballs dialing to 4x IPs themselves) for each of the 4 source IPs. Instead, take those 4 Google/Cloudflare IPs and schedule 5 things: first the DoH query (which can use all 4 IPs), and then each of the 4 IPs as UDP later. * clean up the dnstype.Resolver.Addr confusion; half the code was using it as an IP string (as documented) as half was using it as an IP:port (from some prior type we used), primarily for tests. Instead, document it was being primarily an IP string but also accepting an IP:port for tests, then add an accessor method on it to get the IPPort and use that consistently everywhere. Change-Id: Ifdd72b9e45433a5b9c029194d50db2b9f9217b53 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e3a4952527	net/dns/resolver: count errors when racing DNS queries, fail earlier ... If all N queries failed, we waited until context timeout (in 5 seconds) to return. This makes (*forwarder).forward fail fast when the network's unavailable. Change-Id: Ibbb3efea7ed34acd3f3b29b5fee00ba8c7492569 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d9efbd97cb	net/dns: remove an unused function ... Change-Id: I7c920c76223ffac37954ef2a18754afc52177598 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c13be0c509	tailcfg: clarify how SSHPolicy.Rules are evaluated between auth phases ... Updates #3802 Change-Id: I321183a8a2b065a40dca8dd95ca90cd822a17ff8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	91a187bf87	ssh/tailssh: make checkStillValid also consider username changes ... Currently if the policy changes and the session is logged in with local user "u1" and the new policy says they can only login with "u2" now, the user doesn't get kicked out because they had requested `rando@<ssh-host>` and the defaulting had made that go to `u1`. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	a04eebf59f	ipn/ipnlocal: also use SSHPolicies when updating filterHash ... Updates #3802 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Joe Tsai	d201d217df	go.toolchain.rev: update to go1.18.1 (#4438) ... Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Tom DNetto	24cd26534f	hostinfo, tailcfg: add desktop detection on Linux to hostinfo ... From the machines tab its hard to differenciate desktop Linux installs from server Linux installs. Transmitting this information should make this determination a lot easier. Due to the reality that tailscaled is likely a system process, the standard checks based on XDG_SESSION_TYPE or DISPLAY environment variables are not possible (those variables won't be set). Instead, we look for listening unix sockets that are typical of desktop installs. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Brad Fitzpatrick	9f1dd716e8	tailcfg, logtail: provide Debug bit to disable logtail ... For people running self-hosted control planes who want a global opt-out knob instead of running their own logcatcher. Change-Id: I7f996c09f45850ff77b58bfd5a535e197971725a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ecea6cb994	net/dns/resolver: make DoH dialer use existing dnscache happy eyeball dialer ... Simplify the ability to reason about the DoH dialing code by reusing the dnscache's dialer we already have. Also, reduce the scope of the "ip" variable we don't want to close over. This necessarily adds a new field to dnscache.Resolver: SingleHostStaticResult, for when the caller already knows the IPs to be returned. Change-Id: I9f2aef7926f649137a5a3e63eebad6a3fffa48c0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e96dd00652	ipn/ipnlocal: add capability for debugging peers over peerapi ... The default is still users can debug their own nodes. But like cd916b728b did, this adds support for admins to grant additional capabilities with the new tailcfg.CapabilityDebugPeer cap. Updates #4217 Change-Id: Ifce3d9a1f8e8845797970a4f97b393194663d35f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	945879fa38	cmd/tailscale: [ssh] enable StrictHostKeyChecking mode ... Updates #3802 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	8f5e5bff1e	cmd/tailscale, etc: make "tailscale up --ssh" fail fast when unavailable ... Fail on unsupported platforms (must be Linux or macOS tailscaled with WIP env) or when disabled by admin (with TS_DISABLE_SSH_SERVER=1) Updates #3802 Change-Id: I5ba191ed0d8ba4ddabe9b8fc1c6a0ead8754b286 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f0e2272e04	cmd/tailscale: unhide 'up --ssh' behind WIP env var ... Updates #3802 Change-Id: I99c550c2e4450640b0ee6ab060f178dde1360553 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	93221b4535	ssh/tailssh: cache public keys fetched from URLs ... Updates #3802 Change-Id: I96715bae02bce6ea19f16b1736d1bbcd7bcf3534 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	3ffd88a84a	wgengine/monitor: do not set timeJumped on iOS/Android ... In `(*Mon).Start` we don't run a timer to update `(*Mon).lastWall` on iOS and Android as their sleep patterns are bespoke. However, in the debounce goroutine we would notice that the the wall clock hadn't been updated since the last event would assume that a time jump had occurred. This would result in non-events being considered as major-change events. This commit makes it so that `(*Mon).timeJumped` is never set to `true` on iOS and Android. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	ade7bd8745	ssh/tailssh: close sessions on policy change if no longer allowed ... Updates #3802 Change-Id: I98503c2505b77ac9d0cc792614fcdb691761a70c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	4ec83fbad6	ipn/ipnlocal: only call updateFilter with mutex held ... And rename to updateFilterLocked to prevent future mistakes. Fixes #4427 Change-Id: I4d37b90027d5ff872a339ce8180f5723704848dc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	cd916b728b	ipn/ipnlocal: add start of inter-user Taildrop ... Controlled by server-sent capability policy. To be initially used for SSH servers to record sessions to other nodes. Not yet productized into something user-accessible. (Notably, the list of Taildrop targets from the sender side isn't augmented yet.) This purely permits expanding the set of expands a node will accept a drop from. Updates #3802 Updates #4217 Change-Id: Id7a5bccd686490f8ef2cdc7dae7c07c440dc0085 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f4f76eb275	net/dnsfallback: update from 'go generate' ... Change-Id: I93e0e6d9a4a471953c1ffef07f32605c5724aed8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	16f3520089	all: add arbitrary capability support ... Updates #4217 RELNOTE=start of WhoIsResponse capability support Change-Id: I6522998a911fe49e2f003077dad6164c017eed9b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
James Tucker	c591c91653	tailcfg, control/controlclient: TSMP & disco pings ... tailcfg.PingResponse formalizes the TSMP & disco response message, and controlclient is wired to send POST responses containing tailcfg.PingResponse for TSMP and disco PingRequests. Updates tailscale/corp#754 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	67192a2323	go.mod: bump u-root ... We only use the termios subpackage, so we're unaffected by CVE-2020-7665, but the bump will let dependabot return to slumber. Fixes https://github.com/tailscale/tailscale/security/dependabot/2 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	8ee044ea4a	ssh/tailssh: make the SSH server a singleton, register with LocalBackend ... Remove the weird netstack -> tailssh dependency and instead have tailssh register itself with ipnlocal when linked. This makes tailssh.server a singleton, so we can have a global map of all sessions. Updates #3802 Change-Id: Iad5caec3a26a33011796878ab66b8e7b49339f29 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago