tailscale

Commit Graph

Author	SHA1	Message	Date
Kristoffer Dalby	06c31f4e91	tsweb/varz: remove pprof Updates tailscale/corp#22075 Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>	3 months ago
Brad Fitzpatrick	2636a83d0e	cmd/tta: pull out test driver dialing into a type, fix bugs There were a few places it could get wedged (notably the dial without a timeout). And add a knob for verbose debug logs. And keep two idle connections always. Updates #13038 Change-Id: I952ad182d7111481d97a83c12aa2ff4bfdc55fe8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Brad Fitzpatrick	b78df4d48a	tstest/natlab/vnet: add start of IPv6 support Updates #13038 Change-Id: Ic3d095f167daf6c7129463e881b18f2e0d5693f5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Brad Fitzpatrick	475ab1fb67	cmd/vnet: omit log spam when backend status hasn't changed Updates #13038 Change-Id: I9cc67cf18ba44ff66ba03cda486d5e111e395ce7	3 months ago
Nick Khyl	03acab2639	cmd/cloner, cmd/viewer, util/codegen: add support for aliases of cloneable types We have several checked type assertions to types.Named in both cmd/cloner and cmd/viewer. As Go 1.23 updates the go/types package to produce Alias type nodes for type aliases, these type assertions no longer work as expected unless the new behavior is disabled with gotypesalias=0. In this PR, we add codegen.NamedTypeOf(t types.Type), which functions like t.(types.Named) but also unrolls type aliases. We then use it in place of type assertions in the cmd/cloner and cmd/viewer packages where appropriate. We also update type switches to include types.Alias alongside types.Named in relevant cases, remove *types.Struct cases when switching on types.Type.Underlying and update the tests with more cases where type aliases can be used. Updates #13224 Updates #12912 Signed-off-by: Nick Khyl <nickk@tailscale.com>	3 months ago
Nick Khyl	a9dc6e07ad	util/codegen, cmd/cloner, cmd/viewer: update codegen.LookupMethod to support alias type nodes Go 1.23 updates the go/types package to produce Alias type nodes for type aliases, unless disabled with gotypesalias=0. This new default behavior breaks codegen.LookupMethod, which uses checked type assertions to types.Named and types.Interface, as only named types and interfaces have methods. In this PR, we update codegen.LookupMethod to perform method lookup on the right-hand side of the alias declaration and clearly switch on the supported type nodes types. We also improve support for various edge cases, such as when an alias is used as a type parameter constraint, and add tests for the LookupMethod function. Additionally, we update cmd/viewer/tests to include types with aliases used in type fields and generic type constraints. Updates #13224 Updates #12912 Signed-off-by: Nick Khyl <nickk@tailscale.com>	3 months ago
Brad Fitzpatrick	3b70968c25	cmd/vnet: add --blend and --pcap flags Updates #13038 Change-Id: Id16ea9eb94447a3d9651215f04b2525daf10b3eb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Brad Fitzpatrick	3904e4d175	cmd/tta, tstest/natlab/vnet: remove unneeded port 124 log hack, add log buffer The natlab Test Agent (tta) still had its old log streaming hack in place where it dialed out to anything on TCP port 124 and those logs were streamed to the host running the tests. But we'd since added gokrazy syslog streaming support, which made that redundant. So remove all the port 124 stuff. And then make sure we log to stderr so gokrazy logs it to syslog. Also, keep the first 1MB of logs in memory in tta too, exported via localhost:8034/logs for interactive debugging. That was very useful during debugging when I added IPv6 support. (which is coming in future PRs) Updates #13038 Change-Id: Ieed904a704410b9031d5fd5f014a73412348fa7f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Brad Fitzpatrick	b091264c0a	cmd/systray: set ipn.NotifyNoPrivateKeys, permit non-operator use Otherwise you get "Access denied: watch IPN bus access denied, must set ipn.NotifyNoPrivateKeys when not running as admin/root or operator". This lets a non-operator at least start the app and see the status, even if they can't change everything. (the web UI is unaffected by operator) A future change can add a LocalAPI call to check permissions and guide people through adding a user as an operator (perhaps the web client can do that?) Updates #1708 Change-Id: I699e035a251b4ebe14385102d5e7a2993424c4b7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Will Norris	3c66ee3f57	cmd/systray: add a basic linux systray app This adds a systray app for linux, similar to the apps for macOS and windows. There are already a number of community-developed systray apps, but most of them are either long abandoned, are built for a specific desktop environment, or simply wrap the tailscale CLI. This uses fyne.io/systray (a fork of github.com/getlantern/systray) which uses newer D-Bus specifications to render the tray icon and menu. This results in a pretty broad support for modern desktop environments. This initial commit lacks a number of features like profile switching, device listing, and exit node selection. This is really focused on the application structure, the interaction with LocalAPI, and some system integration pieces like the app icon, notifications, and the clipboard. Updates #1708 Signed-off-by: Will Norris <will@tailscale.com>	3 months ago
Percy Wegmann	d00d6d6dc2	go.mod: update to github.com/tailscale/netlink library that doesn't require vishvananda/netlink After the upstream PR is merged, we can point directly at github.com/vishvananda/netlink and retire github.com/tailscale/netlink. See https://github.com/vishvananda/netlink/pull/1006 Updates #12298 Signed-off-by: Percy Wegmann <percy@tailscale.com>	3 months ago
Ilarion Kovalchuk	0cb7eb9b75	net/dns: updated gonotify dependency to v2 that supports closable context Signed-off-by: Ilarion Kovalchuk <illarion.kovalchuk@gmail.com>	3 months ago
Brad Fitzpatrick	696711cc17	all: switch to and require Go 1.23 Updates #12912 Change-Id: Ib4ae26eb5fb68ad2216cab4913811b94f7eed5b6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Brad Fitzpatrick	0ff474ff37	all: fix new lint warnings from bumping staticcheck In prep for updating to new staticcheck required for Go 1.23. Updates #12912 Change-Id: If77892a023b79c6fa798f936fc80428fd4ce0673 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Brad Fitzpatrick	690d3bfafe	cmd/tailscale/cli: add debug command to do DNS lookups portably To avoid dig vs nslookup vs $X availability issues between OSes/distros. And to be in Go, to match the resolver we use. Updates #13038 Change-Id: Ib7e5c351ed36b5470a42cbc230b8f27eed9a1bf8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Anton Tolchanov	151b77f9d6	cmd/tl-longchain: tool to re-sign nodes with long rotation signatures In Tailnet Lock, there is an implicit limit on the number of rotation signatures that can be chained before the signature becomes too long. This program helps tailnet admins to identify nodes that have signatures with long chains and prints commands to re-sign those node keys with a fresh direct signature. It's a temporary mitigation measure, and we will remove this tool as we design and implement a long-term approach for rotation signatures. Example output: ``` 2024/08/20 18:25:03 Self: does not need re-signing 2024/08/20 18:25:03 Visible peers with valid signatures: 2024/08/20 18:25:03 Peer xxx2.yy.ts.net. (100.77.192.34) nodeid=nyDmhiZiGA11KTM59, current signature kind=direct: does not need re-signing 2024/08/20 18:25:03 Peer xxx3.yy.ts.net. (100.84.248.22) nodeid=ndQ64mDnaB11KTM59, current signature kind=direct: does not need re-signing 2024/08/20 18:25:03 Peer xxx4.yy.ts.net. (100.85.253.53) nodeid=nmZfVygzkB21KTM59, current signature kind=rotation: chain length 4, printing command to re-sign tailscale lock sign nodekey:530bddbfbe69e91fe15758a1d6ead5337aa6307e55ac92dafad3794f8b3fc661 tlpub:4bf07597336703395f2149dce88e7c50dd8694ab5bbde3d7c2a1c7b3e231a3c2 ``` To support this, the NetworkLockStatus localapi response now includes information about signatures of all peers rather than just the invalid ones. This is not displayed by default in `tailscale lock status`, but will be surfaced in `tailscale lock status --json`. Updates #13185 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	3 months ago
Jordan Whited	df6014f1d7	net/tstun,wgengine{/netstack/gro}: refactor and re-enable gVisor GRO for Linux (#13172 ) In `2f27319baf` we disabled GRO due to a data race around concurrent calls to tstun.Wrapper.Write(). This commit refactors GRO to be thread-safe, and re-enables it on Linux. This refactor now carries a GRO type across tstun and netstack APIs with a lifetime that is scoped to a single tstun.Wrapper.Write() call. In `25f0a3fc8f` we used build tags to prevent importation of gVisor's GRO package on iOS as at the time we believed it was contributing to additional memory usage on that platform. It wasn't, so this commit simplifies and removes those build tags. Updates tailscale/corp#22353 Updates tailscale/corp#22125 Updates #6816 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 months ago
ChandonPierre	93dc2ded6e	cmd/k8s-operator: support default proxy class in k8s-operator (#12711 ) Signed-off-by: ChandonPierre <cpierre@coreweave.com> Closes #12421	3 months ago
pierig-n3xtio	2105773874	cmd/k8s-operator/deploy: replace wildcards in Kubernetes Operator RBAC role definitions with verbs cmd/k8s-operator/deploy: replace wildcards in Kubernetes Operator RBAC role definitions with verbs fixes: #13168 Signed-off-by: Pierig Le Saux <pierig@n3xt.io>	3 months ago
tomholford	16bb541adb	wgengine/magicsock: replace deprecated poly1305 (#13184 ) Signed-off-by: tomholford <tomholford@users.noreply.github.com>	3 months ago
Kyle Carberry	6c852fa817	go.{mod,sum}: migrate from nhooyr.io/websocket to github.com/coder/websocket Coder has just adopted nhooyr/websocket which unfortunately changes the import path. `github.com/coder/coder` imports `tailscale.com/net/wsconn` which was still pointing to `nhooyr.io/websocket`, but this change updates it. See https://coder.com/blog/websocket Updates #13154 Change-Id: I3dec6512472b14eae337ae22c5bcc1e3758888d5 Signed-off-by: Kyle Carberry <kyle@carberry.com>	3 months ago
Nick Khyl	f8f9f05ffe	cmd/viewer: add support for map-like container types This PR modifies viewTypeForContainerType to use the last type parameter of a container type as the value type, enabling the implementation of map-like container types where the second-to-last (usually first) type parameter serves as the key type. It also adds a MapContainer type to test the code generation. Updates #12736 Signed-off-by: Nick Khyl <nickk@tailscale.com>	3 months ago
Irbe Krumina	a15ff1bade	cmd/k8s-operator,k8s-operator/sessionrecording: support recording kubectl exec sessions over WebSockets (#12947 ) cmd/k8s-operator,k8s-operator/sessionrecording: support recording WebSocket sessions Kubernetes currently supports two streaming protocols, SPDY and WebSockets. WebSockets are replacing SPDY, see https://github.com/kubernetes/enhancements/issues/4006. We were currently only supporting SPDY, erroring out if session was not SPDY and relying on the kube's built-in SPDY fallback. This PR: - adds support for parsing contents of 'kubectl exec' sessions streamed over WebSockets - adds logic to distinguish 'kubectl exec' requests for a SPDY/WebSockets sessions and call the relevant handler Updates tailscale/corp#19821 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>	3 months ago
Brad Fitzpatrick	4c2e978f1e	cmd/tailscale/cli: support passing network lock keys via files Fixes tailscale/corp#22356 Change-Id: I959efae716a22bcf582c20d261fb1b57bacf6dd9 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Irbe Krumina	b9f42814b5	cmd/containerboot: optionally serve health check endpoint (#12899 ) Add functionality to optionally serve a health check endpoint (off by default). Users can enable health check endpoint by setting TS_HEALTHCHECK_ADDR_PORT to [<addr>]:<port>. Containerboot will then serve an unauthenticatd HTTP health check at /healthz at that address. The health check returns 200 OK if the node has at least one tailnet IP address, else returns 503. Updates tailscale/tailscale#12898 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	3 months ago
Brad Fitzpatrick	02581b1603	gokrazy,tstest/integration/nat: add Gokrazy appliance just for natlab ... rather than abusing the generic tsapp. Per discussion in https://github.com/gokrazy/gokrazy/pull/275 It also means we can remove stuff we don't need, like ntp or randomd. Updates #13038 Change-Id: Iccf579c354bd3b5025d05fa1128e32f1d5bde4e4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Brad Fitzpatrick	f79e688e0d	cmd/tailscale/cli: fix gokrazy CLI-as-a-service detection The change in `b7e48058c8` was too loose; it also captured the CLI being run as a child process under cmd/tta. Updates #13038 Updates #1866 Change-Id: Id410b87132938dd38ed4dd3959473c5d0d242ff5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Irbe Krumina	adbab25bac	cmd/k8s-operator: fix DNS reconciler for dual-stack clusters (#13057 ) * cmd/k8s-operator: fix DNS reconciler for dual-stack clusters This fixes a bug where DNS reconciler logic was always assuming that no more than one EndpointSlice exists for a Service. In fact, there can be multiple, for example, in dual-stack clusters, but also in other cases this is valid (as per kube docs). This PR: - allows for multiple EndpointSlices - picks out the ones for IPv4 family - deduplicates addresses Updates tailscale/tailscale#13056 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>	3 months ago
Brad Fitzpatrick	b7e48058c8	cmd/tailscale/cli: don't run CLI as a service on gokrazy Updates #13038 Updates #1866 Change-Id: Ie3223573044a92f5715a827fb66cc6705b38004f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Nick Khyl	67df9abdc6	util/syspolicy/setting: add package that contains types for the next syspolicy PRs Package setting contains types for defining and representing policy settings. It facilitates the registration of setting definitions using Register and RegisterDefinition, and the retrieval of registered setting definitions via Definitions and DefinitionOf. This package is intended for use primarily within the syspolicy package hierarchy, and added in a preparation for the next PRs. Updates #12687 Signed-off-by: Nick Khyl <nickk@tailscale.com>	3 months ago
Brad Fitzpatrick	a61825c7b8	cmd/tta, vnet: add host firewall, env var support, more tests In particular, tests showing that #3824 works. But that test doesn't actually work yet; it only gets a DERP connection. (why?) Updates #13038 Change-Id: Ie1fd1b6a38d4e90fae7e72a0b9a142a95f0b2e8f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Brad Fitzpatrick	0686bc8b19	cmd/tailscaled: add env knob to control default verbosity Updates #13038 Change-Id: Ic0e6dfc7a8d127ab5ce0ae9aab9119c56e19b636 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Jordan Whited	7aec8d4e6b	cmd/stunstamp: refactor connection construction (#13110 ) getConns() is now responsible for returning both stable and unstable conns. conn and measureFn are now passed together via connAndMeasureFn. newConnAndMeasureFn() is responsible for constructing them. TCP measurement timeouts are adjusted to more closely match netcheck. Updates tailscale/corp#22114 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 months ago
Jordan Whited	218110963d	cmd/stunstamp: implement HTTPS & TCP latency measurements (#13082 ) HTTPS mirrors current netcheck behavior and TCP uses tcp_info->rtt. Updates tailscale/corp#22114 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 months ago
Brad Fitzpatrick	2e32abc3e2	cmd/tailscaled: allow setting env via linux cmdline for integration tests Updates #13038 Change-Id: I51e016d0eb7c14647159706c08f017fdedd68e2a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Maisem Ali	d0e8375b53	cmd/{tta,vnet}: proxy to gokrazy UI Updates #13038 Change-Id: I1cacb1b0f8c3d0e4c36b7890155f7b1ad0d23575 Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 months ago
Brad Fitzpatrick	f47a5fe52b	vnet: reduce some log spam Updates #13038 Change-Id: I76038a90dfde10a82063988a5b54190074d4b5c5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Maisem Ali	f8d23b3582	tstest/integration/nat: stream daemon logs directly Updates #13038 Signed-off-by: Maisem Ali <maisem@tailscale.com> Change-Id: I5da5706149c082c27d74c8b894bf53dd9b259e84	4 months ago
Brad Fitzpatrick	6798f8ea88	tstest/natlab/vnet: add port mapping Updates #13038 Change-Id: Iaf274d250398973790873534b236d5cbb34fbe0e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Maisem Ali	12764e9db4	natlab: add NodeAgentClient This adds a new NodeAgentClient type that can be used to invoke the LocalAPI using the LocalClient instead of handcrafted URLs. However, there are certain cases where it does make sense for the node agent to provide more functionality than whats possible with just the LocalClient, as such it also exposes a http.Client to make requests directly. Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 months ago
Brad Fitzpatrick	1016aa045f	hostinfo: add hostinfo.IsNATLabGuestVM And don't make guests under vnet/natlab upload to logcatcher, as there won't be a valid cert anyway. Updates #13038 Change-Id: Ie1ce0139788036b8ecc1804549a9b5d326c5fef5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	8594292aa4	vnet: add control/derps to test, stateful firewall Updates #13038 Change-Id: Icd65b34c5f03498b5a7109785bb44692bce8911a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Jordan Whited	20691894f5	cmd/stunstamp: refactor to support multiple protocols (#13063 ) 'stun' has been removed from metric names and replaced with a protocol label. This refactor is preparation work for HTTPS & ICMP support. Updates tailscale/corp#22114 Signed-off-by: Jordan Whited <jordan@tailscale.com>	4 months ago
Andrew Lytvynov	c0c4791ce7	cmd/gitops-pusher: ignore previous etag if local acls match control (#13068 ) In a situation when manual edits are made on the admin panel, around the GitOps process, the pusher will be stuck if `--fail-on-manual-edits` is set, as expected. To recover from this, there are 2 options: 1. revert the admin panel changes to get back in sync with the code 2. check in the manual edits to code The former will work well, since previous and local ETags will match control ETag again. The latter will still fail, since local and control ETags match, but previous does not. For this situation, check the local ETag against control first and ignore previous when things are already in sync. Updates https://github.com/tailscale/corp/issues/22177 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	4 months ago
Andrew Lytvynov	ad038f4046	cmd/gitops-pusher: add --fail-on-manual-edits flag (#13066 ) For cases where users want to be extra careful about not overwriting manual changes, add a flag to hard-fail. This is only useful if the etag cache is persistent or otherwise reliable. This flag should not be used in ephemeral CI workers that won't persist the cache. Updates https://github.com/tailscale/corp/issues/22177 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	4 months ago
Naman Sood	f79183dac7	cmd/tsidp: add funnel support (#12591 ) * cmd/tsidp: add funnel support Updates #10263. Signed-off-by: Naman Sood <mail@nsood.in> * look past funnel-ingress-node to see who we're authenticating Signed-off-by: Naman Sood <mail@nsood.in> * fix comment typo Signed-off-by: Naman Sood <mail@nsood.in> * address review feedback, support Basic auth for /token Turns out you need to support Basic auth if you do client ID/secret according to OAuth. Signed-off-by: Naman Sood <mail@nsood.in> * fix typos Signed-off-by: Naman Sood <mail@nsood.in> * review fixes Signed-off-by: Naman Sood <mail@nsood.in> * remove debugging log Signed-off-by: Naman Sood <mail@nsood.in> * add comments, fix header Signed-off-by: Naman Sood <mail@nsood.in> --------- Signed-off-by: Naman Sood <mail@nsood.in>	4 months ago
Brad Fitzpatrick	1ed958fe23	tstest/natlab/vnet: add start of virtual network-based NAT Lab Updates #13038 Change-Id: I3c74120d73149c1329288621f6474bbbcaa7e1a6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	6ca078c46e	cmd/derper: move 204 handler from package main to derphttp Updates #13038 Change-Id: I28a8284dbe49371cae0e9098205c7c5f17225b40 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Anton Tolchanov	b3fc345aba	cmd/derpprobe: use a status page from the prober library Updates tailscale/corp#20583 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	4 months ago
Anton Tolchanov	0fd73746dd	cmd/tailscale/cli: fix `revoke-keys` command name in CLI output During review of #8644 the `recover-compromised-key` command was renamed to `revoke-key`, but the old name remained in some messages printed by the command. Fixes tailscale/corp#19446 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	4 months ago
Jordan Whited	f0230ce0b5	go.mod,net/tstun,wgengine/netstack: implement gVisor TCP GRO for Linux (#12921 ) This commit implements TCP GRO for packets being written to gVisor on Linux. Windows support will follow later. The wireguard-go dependency is updated in order to make use of newly exported IP checksum functions. gVisor is updated in order to make use of newly exported stack.PacketBuffer GRO logic. TCP throughput towards gVisor, i.e. TUN write direction, is dramatically improved as a result of this commit. Benchmarks show substantial improvement, sometimes as high as 2x. High bandwidth-delay product paths remain receive window limited, bottlenecked by gVisor's default TCP receive socket buffer size. This will be addressed in a follow-on commit. The iperf3 results below demonstrate the effect of this commit between two Linux computers with i5-12400 CPUs. There is roughly ~13us of round trip latency between them. The first result is from commit `57856fc` without TCP GRO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec 20 sender [ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec receiver The second result is from this commit with TCP GRO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec 20 sender [ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec receiver Updates #6816 Signed-off-by: Jordan Whited <jordan@tailscale.com>	4 months ago
Jordan Whited	7bc2ddaedc	go.mod,net/tstun,wgengine/netstack: implement gVisor TCP GSO for Linux (#12869 ) This commit implements TCP GSO for packets being read from gVisor on Linux. Windows support will follow later. The wireguard-go dependency is updated in order to make use of newly exported GSO logic from its tun package. A new gVisor stack.LinkEndpoint implementation has been established (linkEndpoint) that is loosely modeled after its predecessor (channel.Endpoint). This new implementation supports GSO of monster TCP segments up to 64K in size, whereas channel.Endpoint only supports up to 32K. linkEndpoint will also be required for GRO, which will be implemented in a follow-on commit. TCP throughput from gVisor, i.e. TUN read direction, is dramatically improved as a result of this commit. Benchmarks show substantial improvement through a wide range of RTT and loss conditions, sometimes as high as 5x. The iperf3 results below demonstrate the effect of this commit between two Linux computers with i5-12400 CPUs. There is roughly ~13us of round trip latency between them. The first result is from commit `57856fc` without TCP GSO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 2.51 GBytes 2.15 Gbits/sec 154 sender [ 5] 0.00-10.00 sec 2.49 GBytes 2.14 Gbits/sec receiver The second result is from this commit with TCP GSO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec 6 sender [ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec receiver Updates #6816 Signed-off-by: Jordan Whited <jordan@tailscale.com>	4 months ago
Jonathan Nobels	8a8ecac6a7	net/dns, cmd/tailscaled: plumb system health tracker into dns cleanup (#12969 ) fixes tailscale#12968 The dns manager cleanup func was getting passed a nil health tracker, which will panic. Fixed to pass it the system health tracker. Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>	4 months ago
Andrew Dunham	35a8fca379	cmd/tailscale/cli: release portmap after netcheck Updates #12954 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ic14f037b48a79b1263b140c6699579b466d89310	4 months ago
Irbe Krumina	a21bf100f3	cmd/k8s-operator,k8s-operator/sessionrecording,sessionrecording,ssh/tailssh: refactor session recording functionality (#12945 ) cmd/k8s-operator,k8s-operator/sessionrecording,sessionrecording,ssh/tailssh: refactor session recording functionality Refactor SSH session recording functionality (mostly the bits related to Kubernetes API server proxy 'kubectl exec' session recording): - move the session recording bits used by both Tailscale SSH and the Kubernetes API server proxy into a shared sessionrecording package, to avoid having the operator to import ssh/tailssh - move the Kubernetes API server proxy session recording functionality into a k8s-operator/sessionrecording package, add some abstractions in preparation for adding support for a second streaming protocol (WebSockets) Updates tailscale/corp#19821 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	4 months ago
Irbe Krumina	c5623e0471	go.{mod,sum},tstest/tools,k8s-operator,cmd/k8s-operator: autogenerate CRD API docs (#12884 ) Re-instates the functionality that generates CRD API docs, but using a different library as the one we were using earlier seemed to have some issues with its Git history. Also regenerates the docs (make kube-generate-all). Updates tailscale/tailscale#12859 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	4 months ago
Andrea Gottardo	90be06bd5b	health: introduce captive-portal-detected Warnable (#12707 ) Updates tailscale/tailscale#1634 This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting. ipn/ipnlocal: fix captive portal loop shutdown Change-Id: I7cafdbce68463a16260091bcec1741501a070c95 net/captivedetection: fix mutex misuse ipn/ipnlocal: ensure that we don't fail to start the timer Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	4 months ago
Nick Khyl	20562a4fb9	cmd/viewer, types/views, util/codegen: add viewer support for custom container types This adds support for container-like types such as Container[T] that don't explicitly specify a view type for T. Instead, a package implementing a container type should also implement and export a ContainerView[T, V] type and a ContainerViewOf(*Container[T]) ContainerView[T, V] function, which returns a view for the specified container, inferring the element view type V from the element type T. Updates #12736 Signed-off-by: Nick Khyl <nickk@tailscale.com>	4 months ago
Andrew Lytvynov	e7bf6e716b	cmd/tailscale: add --min-validity flag to the cert command (#12822 ) Some users run "tailscale cert" in a cron job to renew their certificates on disk. The time until the next cron job run may be long enough for the old cert to expire with our default heristics. Add a `--min-validity` flag which ensures that the returned cert is valid for at least the provided duration (unless it's longer than the cert lifetime set by Let's Encrypt). Updates #8725 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	4 months ago
Lee Briggs	32ce18716b	Add extra environment variables in deployment template (#12858 ) Fixes #12857 Signed-off-by: Lee Briggs <lee@leebriggs.co.uk>	4 months ago
Irbe Krumina	0f57b9340b	cmd/k8s-operator,tstest,go.{mod,sum}: remove fybrik.io/crdoc dependency (#12862 ) Remove fybrik.io/crdoc dependency as it is causing issues for folks attempting to vendor tailscale using GOPROXY=direct. This means that the CRD API docs in ./k8s-operator/api.md will no longer be generated- I am going to look at replacing it with another tool in a follow-up. Updates tailscale/tailscale#12859 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	4 months ago
Irbe Krumina	2742153f84	cmd/k8s-operator: add a metric to track the amount of ProxyClass resources (#12833 ) Updates tailscale/tailscale#10709 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	4 months ago
Adrian Dewhurst	0834712c91	ipn: allow FQDN in exit node selection To match the format of exit node suggestions and ensure that the result is not ambiguous, relax exit node CLI selection to permit using a FQDN including the trailing dot. Updates #12618 Change-Id: I04b9b36d2743154aa42f2789149b2733f8555d3f Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	4 months ago
Nick Khyl	fd0acc4faf	cmd/cloner, cmd/viewer: add _test prefix for files generated with the test build tag Updates #12736 Signed-off-by: Nick Khyl <nickk@tailscale.com>	5 months ago
Linus Brogan	9609b26541	cmd/tailscale: resolve taildrive share paths Fixes #12258. Signed-off-by: Linus Brogan <git@linusbrogan.com>	5 months ago
Nick Khyl	fc28c8e7f3	cmd/cloner, cmd/viewer, util/codegen: add support for generic types and interfaces This adds support for generic types and interfaces to our cloner and viewer codegens. It updates these packages to determine whether to make shallow or deep copies based on the type parameter constraints. Additionally, if a template parameter or an interface type has View() and Clone() methods, we'll use them for getters and the cloner of the owning structure. Updates #12736 Signed-off-by: Nick Khyl <nickk@tailscale.com>	5 months ago
Brad Fitzpatrick	c6af5bbfe8	all: add test for package comments, fix, add comments as needed Updates #cleanup Change-Id: Ic4304e909d2131a95a38b26911f49e7b1729aaef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Irbe Krumina	986d60a094	cmd/k8s-operator: add metrics for attempted/uploaded session recordings (#12765 ) Updates tailscale/corp#19821 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
Irbe Krumina	6a982faa7d	cmd/k8s-operator: send container name to session recorder (#12763 ) Updates tailscale/corp#19821 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
Nick Khyl	726d5d507d	cmd/k8s-operator: update depaware.txt This fixes an issue caused by the merge order of `2b638f550d` and `8bd442ba8c`. Updates #Cleanup Signed-off-by: Nick Khyl <nickk@tailscale.com>	5 months ago
Maisem Ali	2238ca8a05	go.mod: bump bart Updates #bart Signed-off-by: Maisem Ali <maisem@tailscale.com>	5 months ago
Nick Khyl	8bd442ba8c	util/winutil/gp, net/dns: add package for Group Policy API This adds a package with GP-related functions and types to be used in the future PRs. It also updates nrptRuleDatabase to use the new package instead of its own gpNotificationWatcher implementation. Updates #12687 Signed-off-by: Nick Khyl <nickk@tailscale.com>	5 months ago
Andrew Lytvynov	b8af91403d	clientupdate: return true for CanAutoUpdate for macsys (#12746 ) While `clientupdate.Updater` won't be able to apply updates on macsys, we use `clientupdate.CanAutoUpdate` to gate the EditPrefs endpoint in localAPI. We should allow the GUI client to set AutoUpdate.Apply on macsys for it to properly get reported to the control plane. This also allows the tailnet-wide default for auto-updates to propagate to macsys clients. Updates https://github.com/tailscale/corp/issues/21339 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	5 months ago
Nick Khyl	e21d8768f9	types/opt: add generic Value[T any] for optional values of any types Updates #12736 Signed-off-by: Nick Khyl <nickk@tailscale.com>	5 months ago
Irbe Krumina	ba517ab388	cmd/k8s-operator,ssh/tailssh,tsnet: optionally record 'kubectl exec' sessions via Kubernetes operator's API server proxy (#12274 ) cmd/k8s-operator,ssh/tailssh,tsnet: optionally record kubectl exec sessions The Kubernetes operator's API server proxy, when it receives a request for 'kubectl exec' session now reads 'RecorderAddrs', 'EnforceRecorder' fields from tailcfg.KubernetesCapRule. If 'RecorderAddrs' is set to one or more addresses (of a tsrecorder instance(s)), it attempts to connect to those and sends the session contents to the recorder before forwarding the request to the kube API server. If connection cannot be established or fails midway, it is only allowed if 'EnforceRecorder' is not true (fail open). Updates tailscale/corp#19821 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Maisem Ali <maisem@tailscale.com>	5 months ago
Maisem Ali	2b638f550d	cmd/k8s-operator: add depaware.txt Updates #12742 Signed-off-by: Maisem Ali <maisem@tailscale.com>	5 months ago
Tom Proctor	01a7726cf7	cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies (#12577 ) cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies Don't skip installing egress forwarding rules for IPv6 (as long as the host supports IPv6), and set headless services `ipFamilyPolicy` to `PreferDualStack` to optionally enable both IP families when possible. Note that even with `PreferDualStack` set, testing a dual-stack GKE cluster with the default DNS setup of kube-dns did not correctly set both A and AAAA records for the headless service, and instead only did so when switching the cluster DNS to Cloud DNS. For both IPv4 and IPv6 to work simultaneously in a dual-stack cluster, we require headless services to return both A and AAAA records. If the host doesn't support IPv6 but the FQDN specified only has IPv6 addresses available, containerboot will exit with error code 1 and an error message because there is no viable egress route. Fixes #12215 Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	5 months ago
Charlotte Brandhorst-Satzkorn	42f01afe26	cmd/tailscale/cli: exit node filter should display all exit node options (#12699 ) This change expands the `exit-node list -filter` command to display all location based exit nodes for the filtered country. This allows users to switch to alternative servers when our recommended exit node is not working as intended. This change also makes the country filter matching case insensitive, e.g. both USA and usa will work. Updates #12698 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	5 months ago
Jordan Whited	ddf94a7b39	cmd/stunstamp: fix handling of invalid DERP map resp (#12679 ) Updates tailscale/corp#20344 Signed-off-by: Jordan Whited <jordan@tailscale.com>	5 months ago
James Tucker	b565a9faa7	cmd/xdpderper: add autodetection for default interface name This makes deployment easier in hetrogenous environments. Updates ENG-4274 Signed-off-by: James Tucker <james@tailscale.com>	5 months ago
Josh McKinney	18939df0a7	fix: broken tests for localhost Signed-off-by: Josh McKinney <joshka@users.noreply.github.com>	5 months ago
Brad Fitzpatrick	210264f942	cmd/derper: clarify that derper and tailscaled need to be in sync Fixes #12617 Change-Id: Ifc87b7d9cf699635087afb57febd01fb9a6d11b7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Brad Fitzpatrick	6b801a8e9e	cmd/derper: link to various derper docs in more places In hopes it'll be found more. Updates tailscale/corp#20844 Change-Id: Ic92ee9908f45b88f8770de285f838333f9467465 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
James Tucker	46fda6bf4c	cmd/derper: add some DERP diagnostics pointers A few other minor language updates. Updates tailscale/corp#20844 Change-Id: Idba85941baa0e2714688cc8a4ec3e242e7d1a362 Signed-off-by: James Tucker <james@tailscale.com>	5 months ago
Adrian Dewhurst	a6b13e6972	cmd/tailscale/cli: correct command emitted by exit node suggestion The exit node suggestion CLI command was written with the assumption that it's possible to provide a stableid on the command line, but this is incorrect. Instead, it will now emit the name of the exit node. Fixes #12618 Change-Id: Id7277f395b5fca090a99b0d13bfee7b215bc9802 Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	5 months ago
Jordan Whited	94415e8029	cmd/stunstamp: remove sqlite DB and API (#12604 ) stunstamp now sends data to Prometheus via remote write, and Prometheus can serve the same data. Retaining and cleaning up old data in sqlite leads to long probing pauses, and it's not worth investing more effort to optimize the schema and/or concurrency model. Updates tailscale/corp#20344 Signed-off-by: Jordan Whited <jordan@tailscale.com>	5 months ago
Brad Fitzpatrick	3485e4bf5a	derp: make RunConnectionLoop funcs take Messages, support PeerPresentFlags PeerPresentFlags was added in `5ffb2668ef` but wasn't plumbed through to the RunConnectionLoop. Rather than add yet another parameter (as IP:port was added earlier), pass in the raw PeerPresentMessage and PeerGoneMessage struct values, which are the same things, plus two fields: PeerGoneReasonType for gone and the PeerPresentFlags from `5ffb2668ef`. Updates tailscale/corp#17816 Change-Id: Ib19d9f95353651ada90656071fc3656cf58b7987 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Andrew Dunham	200d92121f	types/lazy: add Peek method to SyncValue This adds the ability to "peek" at the value of a SyncValue, so that it's possible to observe a value without computing this. Updates tailscale/corp#17122 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Change-Id: I06f88c22a1f7ffcbc7ff82946335356bb0ef4622	5 months ago
Aaron Klotz	7dd76c3411	net/netns: add Windows support for bind-to-interface-by-route This is implemented via GetBestInterfaceEx. Should we encounter errors or fail to resolve a valid, non-Tailscale interface, we fall back to returning the index for the default interface instead. Fixes #12551 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	5 months ago
Brad Fitzpatrick	91786ff958	cmd/derper: add debug endpoint to adjust mutex profiling rate Updates #3560 Change-Id: I474421ce75c79fb66e1c306ed47daebc5a0e069e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Jordan Whited	0d6e71df70	cmd/stunstamp: add explicit metric to track timeout events (#12564 ) Timeouts could already be identified as NaN values on stunstamp_derp_stun_rtt_ns, but we can't use NaN effectively with promql to visualize them. So, this commit adds a timeouts metric that we can use with rate/delta/etc promql functions. Updates tailscale/corp#20689 Signed-off-by: Jordan Whited <jordan@tailscale.com>	5 months ago
Kristoffer Dalby	dcb0f189cc	cmd/proxy-to-grafana: add flag for alternative control server Fixes #12571 Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>	5 months ago
Andrew Dunham	24976b5bfd	cmd/tailscale/cli: actually perform Noise request in 'debug ts2021' This actually performs a Noise request in the 'debug ts2021' command, instead of just exiting once we've dialed a connection. This can help debug certain forms of captive portals and deep packet inspection that will allow a connection, but will RST the connection when trying to send data on the post-upgraded TCP connection. Updates #1634 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I1e46ca9c9a0751c55f16373a6a76cdc24fec1f18	5 months ago
Andrew Dunham	732605f961	control/controlclient: move noiseConn to internal package So that it can be later used in the 'tailscale debug ts2021' function in the CLI, to aid in debugging captive portals/WAFs/etc. Updates #1634 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Iec9423f5e7570f2c2c8218d27fc0902137e73909	5 months ago
Andrea Gottardo	8eb15d3d2d	cli/netcheck: fail with output if we time out fetching a derpmap (#12528 ) Updates tailscale/corp#20969 Right now, when netcheck starts, it asks tailscaled for a copy of the DERPMap. If it doesn't have one, it makes a HTTPS request to controlplane.tailscale.com to fetch one. This will always fail if you're on a network with a captive portal actively blocking HTTPS traffic. The code appears to hang entirely because the http.Client doesn't have a Timeout set. It just sits there waiting until the request succeeds or fails. This adds a timeout of 10 seconds, and logs more details about the status of the HTTPS request. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	5 months ago
Jordan Whited	a93173b56a	cmd/xdpderper,derp/xdp: implement mode that drops STUN packets (#12527 ) This is useful during maintenance as a method for shedding home client load. Updates tailscale/corp#20689 Signed-off-by: Jordan Whited <jordan@tailscale.com>	5 months ago
Tom Proctor	3099323976	cmd/k8s-operator,k8s-operator,go.{mod,sum}: publish proxy status condition for annotated services (#12463 ) Adds a new TailscaleProxyReady condition type for use in corev1.Service conditions. Also switch our CRDs to use metav1.Condition instead of ConnectorCondition. The Go structs are seralized identically, but it updates some descriptions and validation rules. Update k8s controller-tools and controller-runtime deps to fix the documentation generation for metav1.Condition so that it excludes comments and TODOs. Stop expecting the fake client to populate TypeMeta in tests. See kubernetes-sigs/controller-runtime#2633 for details of the change. Finally, make some minor improvements to validation for service hostnames. Fixes #12216 Co-authored-by: Irbe Krumina <irbe@tailscale.com> Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	5 months ago
Andrew Dunham	45d2f4301f	proxymap, various: distinguish between different protocols Previously, we were registering TCP and UDP connections in the same map, which could result in erroneously removing a mapping if one of the two connections completes while the other one is still active. Add a "proto string" argument to these functions to avoid this. Additionally, take the "proto" argument in LocalAPI, and plumb that through from the CLI and add a new LocalClient method. Updates tailscale/corp#20600 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I35d5efaefdfbf4721e315b8ca123f0c8af9125fb	5 months ago
Irbe Krumina	8cc2738609	cmd/{containerboot,k8s-operator}: store proxy device ID early to help with cleanup for broken proxies (#12425 ) * cmd/containerboot: store device ID before setting up proxy routes. For containerboot instances whose state needs to be stored in a Kubernetes Secret, we additonally store the device's ID, FQDN and IPs. This is used, between other, by the Kubernetes operator, who uses the ID to delete the device when resources need cleaning up and writes the FQDN and IPs on various kube resource statuses for visibility. This change shifts storing device ID earlier in the proxy setup flow, to ensure that if proxy routing setup fails, the device can still be deleted. Updates tailscale/tailscale#12146 Signed-off-by: Irbe Krumina <irbe@tailscale.com> * code review feedback Signed-off-by: Irbe Krumina <irbe@tailscale.com> --------- Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
Andrew Lytvynov	674c998e93	cmd/tailscale/cli: do not allow update --version on macOS (#12508 ) We do not support specific version updates or track switching on macOS. Do not populate the flag to avoid confusion. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	5 months ago

1 2 3 4 5 ...

1984 Commits (877fa504b429f662d714408397c0ed403a0eda01)