tailscale

Commit Graph

Author	SHA1	Message	Date
Maisem Ali	af97e7a793	tailcfg,all: add/plumb Node.IsJailed This adds a new bool that can be sent down from control to do jailing on the client side. Previously this would only be done from control by modifying the packet filter we sent down to clients. This would result in a lot of additional work/CPU on control, we could instead just do this on the client. This has always been a TODO which we keep putting off, might as well do it now. Updates tailscale/corp#19623 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Maisem Ali	e67069550b	ipn/ipnlocal,net/tstun,wgengine: create and plumb jailed packet filter This plumbs a packet filter for jailed nodes through to the tstun.Wrapper; the filter for a jailed node is equivalent to a "shields up" filter. Currently a no-op as there is no way for control to tell the client whether a peer is jailed. Updates tailscale/corp#19623 Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: Maisem Ali <maisem@tailscale.com> Change-Id: I5ccc5f00e197fde15dd567485b2a99d8254391ad	6 months ago
Nick Khyl	f62e678df8	net/dns/resolver, control/controlknobs, tailcfg: use UserDial instead of SystemDial to dial DNS servers Now that tsdial.Dialer.UserDial has been updated to honor the configured routes and dial external network addresses without going through Tailscale, while also being able to dial a node/subnet router on the tailnet, we can start using UserDial to forward DNS requests. This is primarily needed for DNS over TCP when forwarding requests to internal DNS servers, but we also update getKnownDoHClientForProvider to use it. Updates tailscale/corp#18725 Signed-off-by: Nick Khyl <nickk@tailscale.com>	6 months ago
Maisem Ali	5ef178fdca	net/tstun: refactor peerConfig to allow storing more details This refactors the peerConfig struct to allow storing more details about a peer and not just the masq addresses. To be used in a follow up change. As a side effect, this also makes the DNAT logic on the inbound packet stricter. Previously it would only match against the packets dst IP, not it also takes the src IP into consideration. The beahvior is at parity with the SNAT case. Updates tailscale/corp#19623 Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: Maisem Ali <maisem@tailscale.com> Change-Id: I5f40802bebbf0f055436eb8824e4511d0052772d	6 months ago
Nick Khyl	caa3d7594f	ipn/ipnlocal, net/tsdial: plumb routes into tsdial and use them in UserDial We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP. This is primarily necessary to properly dial internal DNS servers accessible over Tailscale and subnet routes. However, to avoid issues when switching between Wi-Fi and cellular, we need to ensure that we don't retain connections to any external addresses on the old interface. Therefore, we need to determine which dialer to use internally based on the configured routes. This plumbs routes and localRoutes from router.Config to tsdial.Dialer, and updates UserDial to use either the peer dialer or the system dialer, depending on the network address and the configured routes. Updates tailscale/corp#18725 Fixes #4529 Signed-off-by: Nick Khyl <nickk@tailscale.com>	6 months ago
Brad Fitzpatrick	ce8969d82b	net/portmapper: add envknob to disable portmapper in localhost integration tests Updates #11962 Change-Id: I8212cd814985b455d96986de0d4c45f119516cb3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Brad Fitzpatrick	c3c18027c6	all: make more tests pass/skip in airplane mode Updates tailscale/corp#19786 Change-Id: Iedc6730fe91c627b556bff5325bdbaf7bf79d8e6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Maisem Ali	fd6ba43b97	types/views: remove duplicate SliceContainsFunc We already have `(Slice[T]).ContainsFunc`. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Brad Fitzpatrick	e42c4396cf	net/netcheck: don't spam on ICMP socket permission denied errors While debugging a failing test in airplane mode on macOS, I noticed netcheck logspam about ICMP socket creation permission denied errors. Apparently macOS just can't do those, or at least not in airplane mode. Not worth spamming about. Updates #cleanup Change-Id: I302620cfd3c8eabb25202d7eef040c01bd8a843c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Brad Fitzpatrick	ee3bd4dbda	derp/derphttp, net/netcheck: plumb netmon.Monitor to derp netcheck client Fixes #11981 Change-Id: I0e15a09f93aefb3cfddbc12d463c1c08b83e09fd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Andrew Dunham	f97d0ac994	net/dns/resolver: add better error wrapping To aid in debugging exactly what's going wrong, instead of the not-particularly-useful "dns udp query: context deadline exceeded" error that we currently get. Updates #3786 Updates #10768 Updates #11620 (etc.) Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I76334bf0681a8a2c72c90700f636c4174931432c	6 months ago
Andrew Dunham	be663c84c1	net/tstun: rename natConfig to peerConfig So that we can use this for additional, non-NAT configuration without it being confusing. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I1658d59c9824217917a94ee76d2d08f0a682986f	6 months ago
Andrew Dunham	10497acc95	net/tstun: refactor natConfig to not be per-family This was a holdover from the older, pre-BART days and is no longer necessary. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I71b892bab1898077767b9ff51cef33d59c08faf8	6 months ago
Jonathan Nobels	45b9aa0d83	net/netmon: remove spammy log statements (#11953 ) Updates tailscale/corp#18960 Tests in corp called us using the wrong logging calls. Removed. This is logged downstream anyway. Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>	6 months ago
Jonathan Nobels	fa1303d632	net/netmon: swap to swift-derived defaultRoute on macos (#11936 ) Updates tailscale/corp#18960 iOS uses Apple's NetworkMonitor to track the default interface and there's no reason we shouldn't also use this on macOS, for the same reasons noted in the comments for why this change was made on iOS. This eliminates the need to load and parse the routing table when querying the defaultRouter() in almost all cases. A slight modification here (on both platforms) to fallback to the default BSD logic in the unhappy-path rather than making assumptions that may not hold. If netmon is eventually parsing AF_ROUTE and able to give a consistently correct answer for the default interface index, we can fall back to that and eliminate the Swift dependency. Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>	6 months ago
Jordan Whited	a47ce618bd	net/tstun: implement env var for disabling UDP GRO on Linux (#11924 ) Certain device drivers (e.g. vxlan, geneve) do not properly handle coalesced UDP packets later in the stack, resulting in packet loss. Updates #11026 Signed-off-by: Jordan Whited <jordan@tailscale.com>	6 months ago
Brad Fitzpatrick	b9adbe2002	net/{interfaces,netmon}, all: merge net/interfaces package into net/netmon In prep for most of the package funcs in net/interfaces to become methods in a long-lived netmon.Monitor that can cache things. (Many of the funcs are very heavy to call regularly, whereas the long-lived netmon.Monitor can subscribe to things from the OS and remember answers to questions it's asked regularly later) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Brad Fitzpatrick	6b95219e3a	net/netmon, add: add netmon.State type alias of interfaces.State ... in prep for merging the net/interfaces package into net/netmon. This is a no-op change that updates a bunch of the API signatures ahead of a future change to actually move things (and remove the type alias) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I477613388f09389214db0d77ccf24a65bff2199c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Brad Fitzpatrick	3672f29a4e	net/netns, net/dns/resolver, etc: make netmon required in most places The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. But first (this change and others) we need to make sure the one netmon.Monitor is plumbed everywhere. Some notable bits: * tsdial.NewDialer is added, taking a now-required netmon * because a tsdial.Dialer always has a netmon, anything taking both a Dialer and a NetMon is now redundant; take only the Dialer and get the NetMon from that if/when needed. * netmon.NewStatic is added, primarily for tests Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Brad Fitzpatrick	7a62dddeac	net/netcheck, wgengine/magicsock: make netmon.Monitor required This has been a TODO for ages. Time to do it. The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Brad Fitzpatrick	4dece0c359	net/netutil: remove a use of deprecated interfaces.GetState I'm working on moving all network state queries to be on netmon.Monitor, removing old APIs. Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: If0de137e0e2e145520f69e258597fb89cf39a2a3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Brad Fitzpatrick	745931415c	health, all: remove health.Global, finish plumbing health.Tracker Updates #11874 Updates #4136 Change-Id: I414470f71d90be9889d44c3afd53956d9f26cd61 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Brad Fitzpatrick	723c775dbb	tsd, ipnlocal, etc: add tsd.System.HealthTracker, start some plumbing This adds a health.Tracker to tsd.System, accessible via a new tsd.System.HealthTracker method. In the future, that new method will return a tsd.System-specific HealthTracker, so multiple tsnet.Servers in the same process are isolated. For now, though, it just always returns the temporary health.Global value. That permits incremental plumbing over a number of changes. When the second to last health.Global reference is gone, then the tsd.System.HealthTracker implementation can return a private Tracker. The primary plumbing this does is adding it to LocalBackend and its dozen and change health calls. A few misc other callers are also plumbed. Subsequent changes will flesh out other parts of the tree (magicsock, controlclient, etc). Updates #11874 Updates #4136 Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Brad Fitzpatrick	5b32264033	health: break Warnable into a global and per-Tracker value halves Previously it was both metadata about the class of warnable item as well as the value. Now it's only metadata and the value is per-Tracker. Updates #11874 Updates #4136 Change-Id: Ia1ed1b6c95d34bc5aae36cffdb04279e6ba77015 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Brad Fitzpatrick	ebc552d2e0	health: add Tracker type, in prep for removing global variables This moves most of the health package global variables to a new `health.Tracker` type. But then rather than plumbing the Tracker in tsd.System everywhere, this only goes halfway and makes one new global Tracker (`health.Global`) that all the existing callers now use. A future change will eliminate that global. Updates #11874 Updates #4136 Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Andrew Dunham	375617c5c8	net/tsdial: assume all connections are affected if no default route is present If this happens, it results in us pessimistically closing more connections than might be necessary, but is more correct since we won't "miss" a change to the default route interface and keep trying to send data over a nonexistent interface, or one that can't reach the internet. Updates tailscale/corp#19124 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ia0b8b04cb8cdcb0da0155fd08751c9dccba62c1a	7 months ago
kari-ts	048cb61dd0	interfaces: create android impl (#11784 ) -Move Android impl into interfaces_android.go -Instead of using ip route to get the interface name, use the one passed in by Android (ip route is restricted in Android 13+ per termux/termux-app#2993) Follow-up will be to do the same for router Fixes tailscale/corp#19215 Fixes tailscale/corp#19124 Signed-off-by: kari-ts <kari@tailscale.com>	7 months ago
Andrew Dunham	b85c2b2313	net/dns/resolver: use SystemDial in DoH forwarder This ensures that we close the underlying connection(s) when a major link change happens. If we don't do this, on mobile platforms switching between WiFi and cellular can result in leftover connections in the http.Client's connection pool which are bound to the "wrong" interface. Updates #10821 Updates tailscale/corp#19124 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ibd51ce2efcaf4bd68e14f6fdeded61d4e99f9a01	7 months ago
Andrew Dunham	226486eb9a	net/interfaces: handle removed interfaces in State.Equal This wasn't previously handling the case where an interface in s2 was removed and not present in s1, and would cause the Equal method to incorrectly return that the states were equal. Updates tailscale/corp#19124 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I3af22bc631015d1ddd0a1d01bfdf312161b9532d	7 months ago
Brad Fitzpatrick	7c1d6e35a5	all: use Go 1.22 range-over-int Updates #11058 Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	068db1f972	net/interfaces: delete unused unexported function It should've been deleted in `11ece02f52`. Updates #9040 Change-Id: If8a136bdb6c82804af658c9d2b0a8c63ce02d509 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	a1abd12f35	cmd/tailscaled, net/tstun: build for aix/ppc64 At least in userspace-networking mode. Fixes #11361 Change-Id: I78d33f0f7e05fe9e9ee95b97c99b593f8fe498f2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Aaron Klotz	4d5d669cd5	net/dns: unconditionally write NRPT rules to local settings We were being too aggressive when deciding whether to write our NRPT rules to the local registry key or the group policy registry key. After once again reviewing the document which calls itself a spec (see issue), it is clear that the presence of the DnsPolicyConfig subkey is the important part, not the presence of values set in the DNSClient subkey. Furthermore, a footnote indicates that the presence of DnsPolicyConfig in the GPO key will always override its counterpart in the local key. The implication of this is important: we may unconditionally write our NRPT rules to the local key. We copy our rules to the policy key only when it contains NRPT rules belonging to somebody other than us. Fixes https://github.com/tailscale/corp/issues/19071 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	7 months ago
James Tucker	db760d0bac	cmd/tailscaled: move cleanup to an implicit action during startup This removes a potentially increased boot delay for certain boot topologies where they block on ExecStartPre that may have socket activation dependencies on other system services (such as systemd-resolved and NetworkManager). Also rename cleanup to clean up in affected/immediately nearby places per code review commentary. Fixes #11599 Signed-off-by: James Tucker <james@tailscale.com>	7 months ago
Brad Fitzpatrick	b0fbd85592	net/tsdial: partially fix "tailscale nc" (UserDial) on macOS At least in the case of dialing a Tailscale IP. Updates #4529 Change-Id: I9fd667d088a14aec4a56e23aabc2b1ffddafa3fe Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
alexelisenko	fe22032fb3	net/dns/{publicdns,resolver}: add start of Control D support Updates #7946 [@bradfitz fixed up version of #8417] Change-Id: I1dbf6fa8d525b25c0d7ad5c559a7f937c3cd142a Signed-off-by: alexelisenko <39712468+alexelisenko@users.noreply.github.com> Signed-off-by: Alex Paguis <alex@windscribe.com>	7 months ago
James Tucker	6e334e64a1	net/netcheck,wgengine/magicsock: align DERP frame receive time heuristics The netcheck package and the magicksock package coordinate via the health package, but both sides have time based heuristics through indirect dependencies. These were misaligned, so the implemented heuristic aimed at reducing DERP moves while there is active traffic were non-operational about 3/5ths of the time. It is problematic to setup a good test for this integration presently, so instead I added comment breadcrumbs along with the initial fix. Updates #8603 Signed-off-by: James Tucker <james@tailscale.com>	7 months ago
Brad Fitzpatrick	8d7894c68e	clientupdate, net/dns: fix some "tailsacle" typos Updates #cleanup Change-Id: I982175e74b0c8c5b3e01a573e5785e6596b7ac39 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
James Tucker	f384742375	net/packet: allow more ICMP errors We now allow some more ICMP errors to flow, specifically: - ICMP parameter problem in both IPv4 and IPv6 (corrupt headers) - ICMP Packet Too Big (for IPv6 PMTU) Updates #311 Updates #8102 Updates #11002 Signed-off-by: James Tucker <james@tailscale.com>	7 months ago
Asutorufa	e20ce7bf0c	net/dns: close ctx when close dns directManager Signed-off-by: Asutorufa <16442314+Asutorufa@users.noreply.github.com>	7 months ago
Percy Wegmann	8b8b315258	net/tstun: use gaissmai/bart instead of tempfork/device This implementation uses less memory than tempfork/device, which helps avoid OOM conditions in the iOS VPN extension when switching to a Tailnet with ExitNode routing enabled. Updates tailscale/corp#18514 Signed-off-by: Percy Wegmann <percy@tailscale.com>	7 months ago
Brad Fitzpatrick	a36cfb4d3d	tailcfg, ipn/ipnlocal, wgengine/magicsock: add only-tcp-443 node attr Updates tailscale/corp#17879 Change-Id: I0dc305d147b76c409cf729b599a94fa723aef0e0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Anton Tolchanov	cf8948da5f	net/routetable: increase route limit used by the test I was running all tests while preparing a recent stable release, and this was failing because my computer is connected to a fairly large tailnet. ``` --- FAIL: TestGetRouteTable (0.01s) routetable_linux_test.go:32: expected at least one default route; ... ``` ``` $ ip route show table 52 \| wc -l 1051 ``` Updates #cleanup Signed-off-by: Anton Tolchanov <anton@tailscale.com>	8 months ago
Andrew Dunham	9884d06b80	net/interfaces: fix test hang on Darwin This test could hang because the subprocess was blocked on writing to the stdout pipe if we find the address we're looking for early in the output. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I68d82c22a5d782098187ae6d8577e43063b72573	8 months ago
Andrew Dunham	62cf83eb92	go.mod: bump gvisor The `stack.PacketBufferPtr` type no longer exists; replace it with `*stack.PacketBuffer` instead. Updates #8043 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib56ceff09166a042aa3d9b80f50b2aa2d34b3683	8 months ago
Andrew Dunham	3dd8ae2f26	net/tstun: fix spelling of "WireGuard" Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ida7e30f4689bc18f5f7502f53a0adb5ac3c7981a	8 months ago
Anton Tolchanov	8cc5c51888	health: warn about reverse path filtering and exit nodes When reverse path filtering is in strict mode on Linux, using an exit node blocks all network connectivity. This change adds a warning about this to `tailscale status` and the logs. Example in `tailscale status`: ``` - not connected to home DERP region 22 - The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310 ``` Example in the logs: ``` 2024/02/21 21:17:07 health("overall"): error: multiple errors: not in map poll The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310 ``` Updates #3310 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	8 months ago
Nick Khyl	7ef1fb113d	cmd/tailscaled, ipn/ipnlocal, wgengine: shutdown tailscaled if wgdevice is closed Tailscaled becomes inoperative if the Tailscale Tunnel wintun adapter is abruptly removed. wireguard-go closes the device in case of a read error, but tailscaled keeps running. This adds detection of a closed WireGuard device, triggering a graceful shutdown of tailscaled. It is then restarted by the tailscaled watchdog service process. Fixes #11222 Signed-off-by: Nick Khyl <nickk@tailscale.com>	8 months ago
Nick Khyl	b42b9817b0	net/dns: do not wait for the interface registry key to appear if the windowsManager is being closed The WinTun adapter may have been removed by the time we're closing the dns.windowsManager, and its associated interface registry key might also have been deleted. We shouldn't use winutil.OpenKeyWait and wait for the interface key to appear when performing a cleanup as a part of the windowsManager shutdown. Updates #11222 Signed-off-by: Nick Khyl <nickk@tailscale.com>	8 months ago
Brad Fitzpatrick	e1bd7488d0	all: remove LenIter, use Go 1.22 range-over-int instead Updates #11058 Updates golang/go#65685 Change-Id: Ibb216b346e511d486271ab3d84e4546c521e4e22 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
mrrfv	ff1391a97e	net/dns/publicdns: add Mullvad family DNS to the list of known DoH servers Adds the new Mullvad family DNS server to the known DNS over HTTPS server list. Signed-off-by: mrrfv <rm-rfv-no-preserve-root@protonmail.com>	8 months ago
James Tucker	8d0d46462b	net/dns: timeout DOH requests after 10s without response headers If a client socket is remotely lost but the client is not sent an RST in response to the next request, the socket might sit in RTO for extended lengths of time, resulting in "no internet" for users. Instead, timeout after 10s, which will close the underlying socket, recovering from the situation more promptly. Updates #10967 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
James Tucker	651c4899ac	net/interfaces: reduce & cleanup logs on iOS We don't need a log line every time defaultRoute is read in the good case, and we now only log default interface updates that are actually changes. Updates #3363 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Andrew Dunham	e8d2fc7f7f	net/tshttpproxy: log when we're using a proxy Updates #11196 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Id6334c10f52f4cfbda9f03dc8096ab7a6c54a088	8 months ago
James Tucker	8fe504241d	net/ktimeout: add a package to set TCP user timeout Setting a user timeout will be a more practical tuning knob for a number of endpoints, this provides a way to set it. Updates tailscale/corp#17587 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Andrew Dunham	70b7201744	net/dns: fix infinite loop when run on Amazon Linux 2023 This fixes an infinite loop caused by the configuration of systemd-resolved on Amazon Linux 2023 and how that interacts with Tailscale's "direct" mode. We now drop the Tailscale service IP from the OS's "base configuration" when we detect this configuration. Updates #7816 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I73a4ea8e65571eb368c7e179f36af2c049a588ee	9 months ago
Andrew Dunham	b0e96a6c39	net/dns: log more info when openresolv commands fail Updates #11129 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ic594868ba3bc31f6d3b0721ecba4090749a81f7f	9 months ago
Brad Fitzpatrick	2bd3c1474b	util/cmpx: delete now that we're using Go 1.22 Updates #11058 Change-Id: I09dea8e86f03ec148b715efca339eab8b1f0f644 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Andrew Dunham	fd94d96e2b	net/portmapper: support legacy "urn:dslforum-org" portmapping services These are functionally the same as the "urn:schemas-upnp-org" services with a few minor changes, and are still used by older devices. Support them to improve our ability to obtain an external IP on such networks. Updates #10911 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I05501fad9d6f0a3b8cf19fc95eee80e7d16cc2cf	9 months ago
Andrew Dunham	b45089ad85	net/portmapper: handle cases where we have no supported clients This no longer results in a nil pointer exception when we get a valid UPnP response with no supported clients. Updates #10911 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I6e3715a49a193ff5261013871ad7fff197a4d77e	9 months ago
kari-ts	c9fd166cc6	net/netmon: when a new network is added, trigger netmon update (#10840 ) Fixes #10107	10 months ago
Andrew Dunham	20f3f706a4	net/netutil: allow 16-bit 4via6 site IDs The prefix has space for 32-bit site IDs, but the validateViaPrefix function would previously have disallowed site IDs greater than 255. Fixes tailscale/corp#16470 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I4cdb0711dafb577fae72d86c4014cf623fa538ef	10 months ago
James Tucker	953fa80c6f	cmd/{derper,stund},net/stunserver: add standalone stun server Add a standalone server for STUN that can be hosted independently of the derper, and factor that back into the derper. Fixes #8434 Closes #8435 Closes #10745 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
Andrew Dunham	35c303227a	net/dns/resolver: add ID to verbose logs in forwarder To make it easier to correlate the starting/ending log messages. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I2802d53ad98e19bc8914bc58f8c04d4443227b26	10 months ago
Andrea Gottardo	d9aeb30281	net/interfaces: handle iOS network transitions (#10680 ) Updates #8022 Updates #6075 On iOS, we currently rely on delegated interface information to figure out the default route interface. The NetworkExtension framework in iOS seems to set the delegate interface only once, upon the creation of the VPN tunnel. If a network transition (e.g. from Wi-Fi to Cellular) happens while the tunnel is connected, it will be ignored and we will still try to set Wi-Fi as the default route because the delegated interface is not getting updated as connectivity transitions. Here we work around this on the Swift side with a NWPathMonitor instance that observes the interface name of the first currently satisfied network path. Our Swift code will call into `UpdateLastKnownDefaultRouteInterface`, so we can rely on that when it is set. If for any reason the Swift machinery didn't work and we don't get any updates, here we also have some fallback logic: we try finding a hardcoded Wi-Fi interface called en0. If en0 is down, we fall back to cellular (pdp_ip0) as a last resort. This doesn't handle all edge cases like USB-Ethernet adapters or multiple Ethernet interfaces, but it is good enough to ensure connectivity isn't broken. I tested this on iPhones and iPads running iOS 17.1 and it appears to work. Switching between different cellular plans on a dual SIM configuration also works (the interface name remains pdp_ip0). Signed-off-by: Andrea Gottardo <andrea@tailscale.com>	10 months ago
Andrew Dunham	fa3639783c	net/portmapper: check returned epoch from PMP and PCP protocols If the epoch that we see during a Probe is less than the existing epoch, it means that the gateway has either restarted or reset its configuration, and an existing mapping is no longer valid. Reset any saved mapping(s) if we detect this case so that a future createOrGetMapping will not attempt to re-use it. Updates #10597 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ie3cddaf625cb94a29885f7a1eeea25dbf6b97b47	10 months ago
Andrew Lytvynov	2716250ee8	all: cleanup unused code, part 2 (#10670 ) And enable U1000 check in staticcheck. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Nick Khyl	c9836b454d	net/netmon: fix goroutine leak in winMon if the monitor is never started When the portable Monitor creates a winMon via newOSMon, we register address and route change callbacks with Windows. Once a callback is hit, it starts a goroutine that attempts to send the event into messagec and returns. The newly started goroutine then blocks until it can send to the channel. However, if the monitor is never started and winMon.Receive is never called, the goroutines remain indefinitely blocked, leading to goroutine leaks and significant memory consumption in the tailscaled service process on Windows. Unlike the tailscaled subprocess, the service process creates but never starts a Monitor. This PR adds a check within the callbacks to confirm the monitor's active status, and exits immediately if the monitor hasn't started. Updates #9864 Signed-off-by: Nick Khyl <nickk@tailscale.com>	11 months ago
Andrew Lytvynov	1302bd1181	all: cleanup unused code, part 1 (#10661 ) Run `staticcheck` with `U1000` to find unused code. This cleans up about a half of it. I'll do the other half separately to keep PRs manageable. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Andrew Dunham	3c333f6341	net/portmapper: add logs about obtained mapping(s) This logs additional information about what mapping(s) are obtained during the creation process, including whether we return an existing cached mapping. Updates #10597 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I9ff25071f064c91691db9ab0b9365ccc5f948d6e	11 months ago
Andrew Dunham	01286af82b	net/interfaces: better handle multiple interfaces in LikelyHomeRouterIP Currently, we get the "likely home router" gateway IP and then iterate through all IPs for all interfaces trying to match IPs to determine the source IP. However, on many platforms we know what interface the gateway is through, and thus we don't need to iterate through all interfaces checking IPs. Instead, use the IP address of the associated interface. This better handles the case where we have multiple interfaces on a system all connected to the same gateway, and where the first interface that we visit (as iterated by ForeachInterfaceAddress) isn't also the default internet route. Updates #8992 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8632f577f1136930f4ec60c76376527a19a47d1f	11 months ago
Andrew Dunham	09136e5995	net/netutil: add function to check rp_filter value (#5703 ) Updates #4432 Change-Id: Ifc332a5747fc1feffdbb87437308cf8ecb21b0b0 Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	11 months ago
Andrew Dunham	d05a572db4	net/portmapper: handle multiple UPnP discovery responses Instead of taking the first UPnP response we receive and using that to create port mappings, store all received UPnP responses, sort and deduplicate them, and then try all of them to obtain an external address. Updates #10602 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I783ccb1834834ee2a9ecbae2b16d801f2354302f	11 months ago
Andrew Dunham	727acf96a6	net/netcheck: use DERP frames as a signal for home region liveness This uses the fact that we've received a frame from a given DERP region within a certain time as a signal that the region is stil present (and thus can still be a node's PreferredDERP / home region) even if we don't get a STUN response from that region during a netcheck. This should help avoid DERP flaps that occur due to losing STUN probes while still having a valid and active TCP connection to the DERP server. RELNOTE=Reduce home DERP flapping when there's still an active connection Updates #8603 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: If7da6312581e1d434d5c0811697319c621e187a0	11 months ago
Andrew Dunham	bac4890467	net/portmapper: be smarter about selecting a UPnP device Previously, we would select the first WANIPConnection2 (and related) client from the root device, without any additional checks. However, some routers expose multiple UPnP devices in various states, and simply picking the first available one can result in attempting to perform a portmap with a device that isn't functional. Instead, mimic what the miniupnpc code does, and prefer devices that are (a) reporting as Connected, and (b) have a valid external IP address. For our use-case, we additionally prefer devices that have an external IP address that's a public address, to increase the likelihood that we can obtain a direct connection from peers. Finally, we split out fetching the root device (getUPnPRootDevice) from selecting the best service within that root device (selectBestService), and add some extensive tests for various UPnP server behaviours. RELNOTE=Improve UPnP portmapping when multiple UPnP services exist Updates #8364 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I71795cd80be6214dfcef0fe83115a5e3fe4b8753	11 months ago
Andrea Barisani	affe11c503	net/netcheck: only run HTTP netcheck for tamago clients Signed-off-by: Andrea Barisani <andrea@inversepath.com>	11 months ago
Denton Gentry	137e9f4c46	net/portmap: add test of Mikrotik Root Desc XML. Unfortunately in the test we can't reproduce the failure seen in the real system ("SOAP fault: UPnPError") Updates https://github.com/tailscale/tailscale/issues/8364 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	11 months ago
Andrew Dunham	c4ccdd1bd1	net/interfaces: ensure we return valid 'self' IP in LikelyHomeRouterIP Before this fix, LikelyHomeRouterIP could return a 'self' IP that doesn't correspond to the gateway address, since it picks the first private address when iterating over the set interfaces as the 'self' IP, without checking that the address corresponds with the previously-detected gateway. This behaviour was introduced by accident in `aaf2df7`, where we deleted the following code: for _, prefix := range privatev4s { if prefix.Contains(gateway) && prefix.Contains(ip) { myIP = ip ok = true return } } Other than checking that 'gateway' and 'ip' were private IP addresses (which were correctly replaced with a call to the netip.Addr.IsPrivate method), it also implicitly checked that both 'gateway' and 'ip' were a part of the same prefix, and thus likely to be the same interface. Restore that behaviour by explicitly checking pfx.Contains(gateway), which, given that the 'ip' variable is derived from our prefix 'pfx', ensures that the 'self' IP will correspond to the returned 'gateway'. Fixes #10466 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Iddd2ee70cefb9fb40071986fefeace9ca2441ee6	11 months ago
Aaron Klotz	64a26b221b	net/dns: use an additional registry setting to disable dynamic DNS updates for our interface on Windows Fixes #9775 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	11 months ago
Juergen Knaack	c27aa9e7ff	net/dns: fix darwin dns resolver files putting each nameserver on one line in /etc/resolver/<domain> fixes: #10134 Signed-off-by: Juergen Knaack <jk@jk-1.de>	11 months ago
Ryan Petris	c4855fe0ea	Fix Empty Resolver Set Config.singleResolverSet returns true if all routes have the same resolvers, even if the routes have no resolvers. If none of the routes have a specific resolver, the default should be used instead. Therefore, check for more than 0 instead of nil. Signed-off-by: Ryan Petris <ryan@petris.net>	12 months ago
Andrew Dunham	e33bc64cff	net/dnsfallback: add singleflight to recursive resolver This prevents running more than one recursive resolution for the same hostname in parallel, which can use excessive amounts of CPU when called in a tight loop. Additionally, add tests that hit the network (when run with a flag) to test the lookup behaviour. Updates tailscale/corp#15261 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I39351e1d2a8782dd4c52cb04b3bd982eb651c81e	12 months ago
Jordan Whited	12d5c99b04	client/tailscale,ipn/{ipnlocal,localapi}: check UDP GRO config (#10071 ) Updates tailscale/corp#9990 Signed-off-by: Jordan Whited <jordan@tailscale.com>	12 months ago
James Tucker	b48b7d82d0	appc,ipn/ipnlocal,net/dns/resolver: add App Connector wiring when enabled in prefs An EmbeddedAppConnector is added that when configured observes DNS responses from the PeerAPI. If a response is found matching a configured domain, routes are advertised when necessary. The wiring from a configuration in the netmap capmap is not yet done, so while the connector can be enabled, no domains can yet be added. Updates tailscale/corp#15437 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
James Tucker	09fcbae900	net/dnscache: remove completed TODO The other IP types don't appear to be imported anymore, and after a scan through I couldn't see any substantial usage of other representations, so I think this TODO is complete. Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Andrew Dunham	57c5b5a77e	net/dns/recursive: update IP for b.root-servers.net As of 2023-11-27, the official IP addresses for b.root-servers.net will change to a new set, with the older IP addresses supported for at least a year after that date. These IPs are already active and returning results, so update these in our recursive DNS resolver package so as to be ready for the switchover. See: https://b.root-servers.org/news/2023/05/16/new-addresses.html Fixes #9994 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I29e2fe9f019163c9ec0e62bdb286e124aa90a487	1 year ago
Andrew Dunham	ef596aed9b	net/portmapper: avoid alloc in getUPnPErrorsMetric Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Iea558024c038face24cc46584421998d10f13a66	1 year ago
Val	19e5f242e0	net/portmapper: convert UPnP metrics to new syncs.Map.LoadOrInit method Simplify UPnP error metrics by using the new syncs.Map.LoadOrInit method. Updates #cleanup Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Brad Fitzpatrick	95faefd1f6	net/dnsfallback: disable recursive resolver for now It seems to be implicated in a CPU consumption bug that's not yet understood. Disable it until we understand. Updates tailscale/corp#15261 Change-Id: Ia6d0c310da6464dda79a70fc3c18be0782812d3f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Denton Gentry	97ee3891f1	net/dns: use direct when NetworkManager has no systemd-resolved Endeavour OS, at least, uses NetworkManager 1.44.2 and does not use systemd-resolved behind the scenes at all. If we find ourselves in that situation, return "direct" not "systemd-resolved" Fixes https://github.com/tailscale/tailscale/issues/9687 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	1 year ago
Maisem Ali	5297bd2cff	cmd/tailscaled,net/tstun: fix data race on start-up in TUN mode Fixes #7894 Change-Id: Ice3f8019405714dd69d02bc07694f3872bb598b8 Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	9d96e05267	net/packet: split off checksum munging into different pkg The current structure meant that we were embedding netstack in the tailscale CLI and in the GUIs. This removes that by isolating the checksum munging to a different pkg which is only called from `net/tstun`. Fixes #9756 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Galen Guyer	04a8b8bb8e	net/dns: properly detect newer debian resolvconf Tailscale attempts to determine if resolvconf or openresolv is in use by running `resolvconf --version`, under the assumption this command will error when run with Debian's resolvconf. This assumption is no longer true and leads to the wrong commands being run on newer versions of Debian with resolvconf >= 1.90. We can now check if the returned version string starts with "Debian resolvconf" if the command is successful. Fixes #9218 Signed-off-by: Galen Guyer <galen@galenguyer.com>	1 year ago
Maisem Ali	78a083e144	types/ipproto: drop IPProto from IPProtoVersion Based on https://github.com/golang/go/wiki/CodeReviewComments#package-names. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Val	893bdd729c	disco,net/tstun,wgengine/magicsock: probe peer MTU Automatically probe the path MTU to a peer when peer MTU is enabled, but do not use the MTU information for anything yet. Updates #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Brad Fitzpatrick	7868393200	net/dns/resolver, ipnlocal: fix ExitDNS on Android and iOS Advertise it on Android (it looks like it already works once advertised). And both advertise & likely fix it on iOS. Yet untested. Updates #9672 Change-Id: If3b7e97f011dea61e7e75aff23dcc178b6cf9123 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Tom DNetto	da1b917575	net/tstun: finish wiring IPv6 NAT support Updates https://github.com/tailscale/corp/issues/11202 Updates ENG-991 Signed-off-by: Tom DNetto <tom@tailscale.com>	1 year ago
Andrew Dunham	91b9899402	net/dns/resolver: fix flaky test Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I2d073220bb6ac78ba88d8be35085cc23b727d69f	1 year ago
Andrew Dunham	286c6ce27c	net/dns/resolver: race UDP and TCP queries (#9544 ) Instead of just falling back to making a TCP query to an upstream DNS server when the UDP query returns a truncated query, also start a TCP query in parallel with the UDP query after a given race timeout. This ensures that if the upstream DNS server does not reply over UDP (or if the response packet is blocked, or there's an error), we can still make queries if the server replies to TCP queries. This also adds a new package, util/race, to contain the logic required for racing two different functions and returning the first non-error answer. Updates tailscale/corp#14809 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I4311702016c1093b1beaa31b135da1def6d86316	1 year ago
Tom DNetto	656a77ab4e	net/packet: implement methods for rewriting v6 addresses Implements the ability for the address-rewriting code to support rewriting IPv6 addresses. Specifically, UpdateSrcAddr & UpdateDstAddr. Signed-off-by: Tom DNetto <tom@tailscale.com> Updates https://github.com/tailscale/corp/issues/11202	1 year ago

1 2 3 4 5 ...

1058 Commits (8088334714a01d1018bd2bef0cbfe926313f4a23)