There are a few situations where we end up with duplicate profiles.
Add tests to identify those situations, fix in followup.
Updates #7726
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was being modified in two places in Direct for the auth routine
and then in LocalBackend when a new NetMap was received. This was
confusing, so make Direct also own changes to Persist when a new
NetMap is received.
Updates #7726
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds the capability to pad disco ping message payloads to reach a
specified size. It also plumbs it through to the tailscale ping -size
flag.
Disco pings used for actual endpoint discovery do not use this yet.
Updates #311.
Signed-off-by: salman <salman@tailscale.com>
Co-authored-by: Val <valerie@tailscale.com>
Rather than make each ipn.StateStore implementation guard against
useless writes (a write of the same value that's already in the
store), do writes via a new wrapper that has a fast path for the
unchanged case.
This then fixes profileManager's flood of useless writes to AWS SSM,
etc.
Updates #8785
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The revoke-keys command allows nodes with tailnet lock keys
to collaborate to erase the use of a compromised key, and remove trust
in it.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-1848
While our `shouldStartDomainRenewal` check is correct, `getCertPEM`
would always bail if the existing cert is not expired. Add the same
`shouldStartDomainRenewal` check to `getCertPEM` to make it proceed with
renewal when existing certs are still valid but should be renewed.
The extra check is expensive (ARI request towards LetsEncrypt), so cache
the last check result for 1hr to not degrade `tailscale serve`
performance.
Also, asynchronous renewal is great for `tailscale serve` but confusing
for `tailscale cert`. Add an explicit flag to `GetCertPEM` to force a
synchronous renewal for `tailscale cert`.
Fixes#8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change introduces a new subcommand, `exit-node`, along with a
subsubcommand of `list` and a `--filter` flag.
Exit nodes without location data will continue to be displayed when
`status` is used. Exit nodes with location data will only be displayed
behind `exit-node list`, and in status if they are the active exit node.
The `filter` flag can be used to filter exit nodes with location data by
country.
Exit nodes with Location.Priority data will have only the highest
priority option for each country and city listed. For countries with
multiple cities, a <Country> <Any> option will be displayed, indicating
the highest priority node within that country.
Updates tailscale/corp#13025
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Define PeerCapabilty and PeerCapMap as the new way of sending down
inter-peer capability information.
Previously, this was unstructured and you could only send down strings
which got too limiting for certain usecases. Instead add the ability
to send down raw JSON messages that are opaque to Tailscale but provide
the applications to define them however they wish.
Also update accessors to use the new values.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
When using a custom http port like 8080, this was resulting in a
constructed hostname of `host.tailnet.ts.net:8080.tailnet.ts.net` when
looking up the serve handler. Instead, strip off the port before adding
the MagicDNS suffix.
Also use the actual hostname in `serve status` rather than the literal
string "host".
Fixes#8635
Signed-off-by: Will Norris <will@tailscale.com>
The server hasn't sent it in ages.
Updates #cleanup
Change-Id: I9695ab0f074ec6fb006e11faf3cdfc5ca049fbf8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
ScrubbedGoroutineDump previously only returned the stacks of all
goroutines. I also want to be able to use this for only the current
goroutine's stack. Add a bool param to support both ways.
Updates tailscale/corp#5149
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a `Tailscale-Headers-Info` header whenever the `Tailscale-User-`
headers are filled from the HTTP proxy handler.
Planning on hooking this shorturl up to KB docs about the header
values (i.e. what's a login name vs. display name) and security
considerations to keep in mind while using these headers - notibly
that they can also be filled from external requests that do not hit
tailscaled.
Updates https://github.com/tailscale/tailscale/issues/6954
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Trying to SSH when SELinux is enforced results in errors like:
```
➜ ~ ssh ec2-user@<ip>
Last login: Thu Jun 1 22:51:44 from <ip2>
ec2-user: no shell: Permission denied
Connection to <ip> closed.
```
while the `/var/log/audit/audit.log` has
```
type=AVC msg=audit(1685661291.067:465): avc: denied { transition } for pid=5296 comm="login" path="/usr/bin/bash" dev="nvme0n1p1" ino=2564 scontext=system_u:system_r:unconfined_service_t:s0 tcontext=unconfined_u:unconfined_r:unconfined_t:s0 tclass=process permissive=0
```
The right fix here would be to somehow install the appropriate context when
tailscale is installed on host, but until we figure out a way to do that
stop using the `login` cmd in these situations.
Updates #4908
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Adds two new headers to HTTP serve proxy:
- `Tailscale-User-Login`: Filled with requester's login name.
- `Tailscale-User-Name`: Filled with requester's display name.
These headers only get filled when the SrcAddr is associated with
a non-tagged (i.e. user-owned) node within the client's Tailnet.
The headers are passed through empty when the request originated
from another tailnet, or the public internet (via funnel).
Updates https://github.com/tailscale/tailscale/issues/6954
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
* tka: provide verify-deeplink local API endpoint
Fixes https://github.com/tailscale/tailscale/issues/8302
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
Address code review comments
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
Address code review comments by Ross
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
* Improve error encoding, fix logic error
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
---------
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
The netstack code had a bunch of logic to figure out if the LocalBackend should handle an
incoming connection and then would call the function directly on LocalBackend. Move that
logic to LocalBackend and refactor the methods to return conn handlers.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is a follow up on PR #8172 that adds a synchronous Poll method
which allows for the Poller to be used as a zero value without needing
the constructor. The local backend is also changed to use the new API.
A follow up PR will remove the async functionality from the portlist package.
Updates #8171
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Instead of renewing certificates based on whether or not they're expired
at a fixed 14-day period in the future, renew based on whether or not
we're more than 2/3 of the way through the certificate's lifetime. This
properly handles shorter-lived certificates without issue.
Updates #8204
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I5e82a9cadc427c010d04ce58c7f932e80dd571ea
This change introduces a NodeKey func on localbackend that returns the
public node key.
Updates tailscale/corp#9967
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
It was supposed to be best effort but in some cases (macsys at least,
per @marwan-at-work) it hangs and exhausts the whole context.Context
deadline so we fail to make the SetDNS call to the server.
Updates #8067
Updates #3273 etc
Change-Id: Ie1f04abe9689951484748aecdeae312afbafdb0f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fix does not seem ideal, but the test infrastructure using a local
goos doesn't seem to avoid all of the associated challenges, but is
somewhat deeply tied to the setup.
The core issue this addresses for now is that when run on Windows there
can be no code paths that attempt to use an invalid UID string, which on
Windows is described in [1].
For the goos="linux" tests, we now explicitly skip the affected
migration code if runtime.GOOS=="windows", and for the Windows test we
explicitly use the running users uid, rather than just the string
"user1". We also now make the case where a profile exists and has
already been migrated a non-error condition toward the outer API.
Updates #7876
[1] https://learn.microsoft.com/en-us/windows-server/identity/ad-ds/manage/understand-security-identifiers
Signed-off-by: James Tucker <jftucker@gmail.com>
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c
Without this, the peer fails to do anything over the PeerAPI if it
has a masquerade address.
```
Apr 19 13:58:15 hydrogen tailscaled[6696]: peerapi: invalid request from <ip>:58334: 100.64.0.1/32 not found in self addresses
```
Updates #8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Exposes some internal state of the sockstats package via the C2N and
PeerAPI endpoints, so that it can be used for debugging. For now this
includes the estimated radio on percentage and a second-by-second view
of the times the radio was active.
Also fixes another off-by-one error in the radio on percentage that
was leading to >100% values (if n seconds have passed since we started
to monitor, there may be n + 1 possible seconds where the radio could
have been on).
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This adds an initial and intentionally minimal configuration for
golang-ci, fixes the issues reported, and adds a GitHub Action to check
new pull requests against this linter configuration.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163
Redoes the approach from #5550 and #7539 to explicitly pass in the logf
function, instead of having global state that can be overridden.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We accidentally switched to ./tool/go in
4022796484 which resulted in no longer
running Windows builds, as this is attempting to run a bash script.
I was unable to quickly fix the various tests that have regressed, so
instead I've added skips referencing #7876, which we need to back and
fix.
Updates #7262
Updates #7876
Signed-off-by: James Tucker <james@tailscale.com>
Otherwise there may be a panic if it's nil (and the control side of
the c2n call will just time out).
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Makes it more apparent in the PeerAPI endpoint that the client was
not built with the appropriate toolchain or build tags.
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This makes the sockstat logger available on all builds, but only enables
it by default for unstable. For stable builds, the logger must be
explicitly enabled via C2N component logger.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Will Norris <will@tailscale.com>
I realized that a lot of the problems that we're seeing around migration and
LocalBackend state can be avoided if we drive Windows pref migration entirely
from within tailscaled. By doing it this way, tailscaled can automatically
perform the migration as soon as the connection with the client frontend is
established.
Since tailscaled is already running as LocalSystem, it already has access to
the user's local AppData directory. The profile manager already knows which
user is connected, so we simply need to resolve the user's prefs file and read
it from there.
Of course, to properly migrate this information we need to also check system
policies. I moved a bunch of policy resolution code out of the GUI and into
a new package in util/winutil/policy.
Updates #7626
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
For stores like k8s secrets we need to dial out to the k8s API as though Tailscale
wasn't running. The issue currently only manifests when you try to use an exit node
while running inside a k8s cluster and are trying to use Kubernetes secrets as the
backing store.
This doesn't address cmd/containerboot, which I'll do in a follow up.
Updates #7695
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Since users can run tailscaled in a variety of ways (root, non-root,
non-root with process capabilities on Linux), this check will print the
current process permissions to the log to aid in debugging.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ida93a206123f98271a0c664775d0baba98b330c7
The reverse proxy was sending the ingressd IPv6 down as the
X-Forwarded-For. This update uses the actual remote addr.
Updates tailscale/corp#9914
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
This change trims the mountPoint from the request URL path before
sending the request to the reverse proxy.
Today if you mount a proxy at `/foo` and request to
`/foo/bar/baz`, we leak the `mountPoint` `/foo` as part of the request
URL's path.
This fix makes removed the `mountPoint` prefix from the path so
proxied services receive requests as if they were running at the root
(`/`) path.
This could be an issue if the app generates URLs (in HTML or otherwise)
and assumes `/path`. In this case, those URLs will 404.
With that, I still think we should trim by default and not leak the
`mountPoint` (specific to Tailscale) into whatever app is hosted.
If it causes an issue with URL generation, I'd suggest looking at configuring
an app-specific path prefix or running Caddy as a more advanced
solution.
Fixes: #6571
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
We were checking against the wrong directory, instead if we
have a custom store configured just use that.
Fixes#7588Fixes#7665
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We were not storing the ACME keys in the state store, they would always
be stored on disk.
Updates #7588
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change focuses on the backend log ID, which is the mostly commonly
used in the client. Tests which don't seem to make use of the log ID
just use the zero value.
Signed-off-by: Will Norris <will@tailscale.com>
Switch to using logtail for logging sockstat logs. Always log locally
(on supported platforms), but disable automatic uploading. Change
existing c2n sockstats request to trigger upload to log server and
return log ID.
Signed-off-by: Will Norris <will@tailscale.com>
They're not needed for the sockstats logger, and they're somewhat
expensive to return (since they involve the creation of a map per
label). We now have a separate GetInterfaces() method that returns
them instead (which we can still use in the PeerAPI debug endpoint).
If changing sockstatlog to sample at 10,000 Hz (instead of the default
of 10Hz), the CPU usage would go up to 59% on a iPhone XS. Removing the
per-interface stats drops it to 20% (a no-op implementation of Get that
returns a fixed value is 16%).
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Followup to #7499 to make validation a separate function (
GetWithValidation vs. Get). This way callers that don't need it don't
pay the cost of a syscall per active TCP socket.
Also clears the conn on close, so that we don't double-count the stats.
Also more consistently uses Go doc comments for the exported API of the
sockstats package.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Previously the part that handled Funnel connections was not
aware of any listeners that tsnet.Servers might have had open
so it would check against the ServeConfig and fail.
Adding a ServeConfig for a TCP proxy was also not suitable in this
scenario as that would mean creating two different listeners and have
one forward to the other, which really meant that you could not have
funnel and tailnet-only listeners on the same port.
This also introduces the ipn.FunnelConn as a way for users to identify
whether the call is coming over funnel or not. Currently it only holds
the underlying conn and the target as presented in the "Tailscale-Ingress-Target"
header.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We can use the TCP_CONNECTION_INFO getsockopt() on Darwin to get
OS-collected tx/rx bytes for TCP sockets. Since this API is not available
for UDP sockets (or on Linux/Android), we can't rely on it for actual
stats gathering.
However, we can use it to validate the stats that we collect ourselves
using read/write hooks, so that we can be more confident in them. We
do need additional hooks from the Go standard library (added in
tailscale/go#59) to be able to collect them.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This change adds a ringbuffer to each magicsock endpoint that keeps a
fixed set of "changes"–debug information about what updates have been
made to that endpoint.
Additionally, this adds a LocalAPI endpoint and associated
"debug peer-status" CLI subcommand to fetch the set of changes for a given
IP or hostname.
Updates tailscale/corp#9364
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I34f726a71bddd0dfa36ec05ebafffb24f6e0516a
Makes it cheaper/simpler to persist values, and encourages reuse of
labels as opposed to generating an arbitrary number.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This prevents a panic where we synthesize a new netmap in
setClientStatus after we've shut down and nil'd out the controlclient,
since that function expects to be called while connected to control.
Fixes#7392
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib631eb90f34f6afa008d69bbb386f70da145e102
Uses the hooks added by tailscale/go#45 to instrument the reads and
writes on the major code paths that do network I/O in the client. The
convention is to use "<package>.<type>:<label>" as the annotation for
the responsible code path.
Enabled on iOS, macOS and Android only, since mobile platforms are the
ones we're most interested in, and we are less sensitive to any
throughput degradation due to the per-I/O callback overhead (macOS is
also enabled for ease of testing during development).
For now just exposed as counters on a /v0/sockstats PeerAPI endpoint.
We also keep track of the current interface so that we can break out
the stats by interface.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The log ID types were moved to a separate package so that
code that only depend on log ID types do not need to link
in the logic for the logtail client itself.
Not all code need the logtail client.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Exposes the delegated interface data added by #7248 in the debug
endpoint. I would have found it useful when working on that PR, and
it may be handy in the future as well.
Also makes the interfaces table slightly easier to parse by adding
borders to it. To make then nicer-looking, the CSP was relaxed to allow
inline styles.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
With #6566 we added an external mechanism for getting the default
interface, and used it on macOS and iOS (see tailscale/corp#8201).
The goal was to be able to get the default physical interface even when
using an exit node (in which case the routing table would say that the
Tailscale utun* interface is the default).
However, the external mechanism turns out to be unreliable in some
cases, e.g. when multiple cellular interfaces are present/toggled (I
have occasionally gotten my phone into a state where it reports the pdp_ip1
interface as the default, even though it can't actually route traffic).
It was observed that `ifconfig -v` on macOS reports an "effective interface"
for the Tailscale utn* interface, which seems promising. By examining
the ifconfig source code, it turns out that this is done via a
SIOCGIFDELEGATE ioctl syscall. Though this is a private API, it appears
to have been around for a long time (e.g. it's in the 10.13 xnu release
at https://opensource.apple.com/source/xnu/xnu-4570.41.2/bsd/net/if_types.h.auto.html)
and thus is unlikely to go away.
We can thus use this ioctl if the routing table says that a utun*
interface is the default, and go back to the simpler mechanism that
we had before #6566.
Updates #7184
Updates #7188
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Followup to #7235, we were not treating the formatting arguments as
variadic. This worked OK for single values, but stopped working when
we started passing multiple values (noticed while trying out #7244).
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Useful when debugging issues (e.g. to see the full routing table), and
easier to refer to the output via a browser than trying to read it from
the logs generated by `bugreport --diagnose`.
Behind a canDebug() check, similar to the /magicsock and /interfaces
endpoints.
Updates #7184
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
With #6566 we started to more aggressively bind to the default interface
on Darwin. We are seeing some reports of the wrong cellular interface
being chosen on iOS. To help with the investigation, this adds to knobs
to control the behavior changes:
- CapabilityDebugDisableAlternateDefaultRouteInterface disables the
alternate function that we use to get the default interface on macOS
and iOS (implemented in tailscale/corp#8201). We still log what it
would have returned so we can see if it gets things wrong.
- CapabilityDebugDisableBindConnToInterface is a bigger hammer that
disables binding of connections to the default interface altogether.
Updates #7184
Updates #7188
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The profileManager was using the LoginName as a proxy to figure out if the profile
had logged in, however the LoginName is not present if the node was created with an
Auth Key that does not have an associated user.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We now handle the case where the NetworkMap.SelfNode has already expired
and do not return an expiry time in the past (which causes an ~infinite
loop of timers to fire).
Additionally, we now add an explicit check to ensure that the next
expiry time is never before the current local-to-the-system time, to
ensure that we don't end up in a similar situation due to clock skew.
Finally, we add more tests for this logic to ensure that we don't
regress on these edge cases.
Fixes#7193
Change-Id: Iaf8e3d83be1d133a7aab7f8d62939e508cc53f9c
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
If the user passes the --diagnose flag, print a warning if any of the
default or fallback DNS resolvers are Tailscale IPs. This can interfere
with the ability to connect to the controlplane, and is typically
something to pay attention to if there's a connectivity issue.
Change-Id: Ib14bf6228c037877fbdcd22b069212b1a4b2c456
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
We can log too quickly for logtail to catch up, even when we opt out of
log rate-limiting. When the user passes the --diagnose flag to
bugreport, we use a token bucket to control how many logs per second are
printed and sleep until we're able to write more.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If27672d66b621b589280bd0fe228de367ffcbd8f
The iOS has a command to reset the persisted state of the app, but it
was doing its own direct keychain manipulation. This proved to be
brittle (since we changed how preferences are stored with #6022), so
we instead add a LocalAPI endpoint to do do this, which can be updated
in tandem.
This clears the same state as the iOS implementation (tailscale/corp#3186),
that is the machine key and preferences (which includes the node key).
Notably this does not clear the logtail ID, so that logs from the device
still end up in the same place.
Updates tailscale/corp#8923
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
When turned on via environment variable (off by default), this will use
the BSD routing APIs to query what interface index a socket should be
bound to, rather than binding to the default interface in all cases.
Updates #5719
Updates #5940
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib4c919471f377b7a08cd3413f8e8caacb29fee0b
This allows users to temporarily enable/disable dnscache logging via a
new node capability, to aid in debugging strange connectivity issues.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I46cf2596a8ae4c1913880a78d0033f8b668edc08
The current node isn't in NetMap.Peers, so without this we would not
have fired this timer on self expiry.
Updates #6932
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Id57f96985397e372f9226802d63b42ff92c95093
On macOS (AppStore and macsys), we need to bind to ""/all-interfaces
due to the network sandbox. Ideally we would only bind to the
Tailscale interface, but macOS errors out if we try to
to listen on privileged ports binding only to a specific
interface.
We also implement the lc.Control hook, same as we do for
peerapi. It doesn't solve our problem but it's better that
we do and would likely be required when Apple gets around to
fixing per-interface priviliged port binding.
Fixes: #6364
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
This change delays the first flush in the /watch-ipn-bus/ handler
until after the watcher has been successfully installed on the IPN
bus. It does this by adding a new onWatchAdded callback to
LocalBackend.WatchNotifications().
Without this, the endpoint returns a 200 almost immediatly, and
only then installs a watcher for IPN events. This means there's a
small window where events could be missed by clients after calling
WatchIPNBus().
Fixestailscale/corp#8594.
Signed-off-by: salman <salman@tailscale.com>
In order to be able to synthesize a new NetMap when a node expires, have
LocalBackend start a timer when receiving a new NetMap that fires
slightly after the next node expires. Additionally, move the logic that
updates expired nodes into LocalBackend so it runs on every netmap
(whether received from controlclient or self-triggered).
Updates #6932
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I833390e16ad188983eac29eb34cc7574f555f2f3
Needed for clients that get information via the /v0/status LocalAPI
endpoint (e.g. to not offer expired exit nodes as options).
Updates tailscale/corp#8702
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
UI works remains, but data is there now.
Updates #4015
Change-Id: Ib91e94718b655ad60a63596e59468f3b3b102306
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Unsigned peers should not be allowed to generate Wake-on-Lan packets,
only access Funnel.
Updates #6934
Updates #7515
Updates #6475
Signed-off-by: James Tucker <james@tailscale.com>
This makes `tailscale debug watch-ipn` safe to use for troubleshooting
user issues, in addition to local debugging during development.
Signed-off-by: David Anderson <danderson@tailscale.com>
By default, `http.Transport` keeps idle connections open hoping to re-use them in the future. Combined with a separate transport per request in HTTP proxy this results in idle connection leak.
Fixes#6773
Use multierr.Range to iterate through an error tree
instead of multiple invocations of errors.As.
This scales better as we add more Go error types to the switch.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Mainly motivated by wanting to know how much Taildrop is used, but
also useful when tracking down how many invalid requests are
generated.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Nodes which have both -advertise-exit-node and -exit-node in prefs
should continue have them until the next invocation of `tailscale up`.
Updates #3569.
Signed-off-by: salman <salman@tailscale.com>
* Do not print the status at the end of a successful operation
* Ensure the key of the current node is actually trusted to make these changes
Signed-off-by: Tom DNetto <tom@tailscale.com>
This handles the case where the inner *os.PathError is wrapped in
another error type, and additionally will redact errors of type
*os.LinkError. Finally, add tests to verify that redaction works.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie83424ff6c85cdb29fb48b641330c495107aab7c
x/exp/slices now has ContainsFunc (golang/go#53983) so we can delete
our versions.
Change-Id: I5157a403bfc1b30e243bf31c8b611da25e995078
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For testing of Windows GUI client.
Updates #6480
Change-Id: I42f7526d95723e14bed7085fb759e371b43aa9da
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To simplify clients getting the initial state when they subscribe.
Change-Id: I2490a5ab2411253717c74265a46a98012b80db82
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If user's fn returned false and never canceled their ctx, we never
stopped the NotifyWatchEngineUpdates goroutine.
This was introduced recently (this cycle).
Change-Id: I3453966ac71e00727296ddd237ef845782f4e52e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were writing the error when getting the default interface before
setting the content type, so we'd get HTML treated as plain text.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The peerapi IPv6 listener has a nil listener.
But we didn't need the listener's address anyway, so don't
try to use it.
Change-Id: I8e8a1a895046d129a3683973e732d9bed82f3b02
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, `TAILSCALE_USE_WIP_CODE` was needed to hit a bunch of the TKA paths. With
this change:
- Enablement codepaths (NetworkLockInit) and initialization codepaths (tkaBootstrapFromGenesisLocked via tkaSyncIfNeeded)
require either the WIP envknob or CapabilityTailnetLockAlpha.
- Normal operation codepaths (tkaSyncIfNeeded, tkaFilterNetmapLocked) require TKA to be initialized, or either-or the
envknob / capability.
- Auxillary commands (ie: changing tka keys) require TKA to be initialized.
The end result is that it shouldn't be possible to initialize TKA (or subsequently use any of its features) without being
sent the capability or setting the envknob on tailscaled yourself.
I've also pulled out a bunch of unnecessary checks for CanSupportNetworkLock().
Signed-off-by: Tom DNetto <tom@tailscale.com>
We merge/dedupe profiles based on UserID and NodeID, however we were not accounting for ControlURLs.
Updates #713
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The Go style weirds people out so we try to stick to the more
well-known double hyphen style in docs.
Change-Id: Iad6db5c82cda37f6b7687eed7ecd9276f8fd94d6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This reverts commit f1130421f0.
It was submitted with failing tests (go generate checks)
Requires a lot of API changes to fix so rolling back instead of
forward.
Change-Id: I024e8885c0ed44675d3028a662f386dda811f2ad
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We want users to have the freedom to start tailscaled with `-no-logs-no-support`,
but that is obviously in direct conflict with tailnets that have network logging
enabled.
When we detect that condition, we record the issue in health, notify the client,
set WantRunning=false, and bail.
We clear the item in health when a profile switch occurs, since it is a
per-tailnet condition that should not propagate across profiles.
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Only the macOS/iOS clients care about it still, so we'll move it
to their repo.
But keep a test that makes sure that LocalBackend continues to
implement it so we get an early warning sign before we break
macOS/iOS.
Change-Id: I56392b740fe55b4d28468b77124c821b5c46c22b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We use this pattern in a number of places (in this repo and elsewhere)
and I was about to add a fourth to this repo which was crossing the line.
Add this type instead so they're all the same.
Also, we have another Set type (SliceSet, which tracks its keys in
order) in another repo we can move to this package later.
Change-Id: Ibbdcdba5443fae9b6956f63990bdb9e9443cefa9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The "userID is empty everywhere but Windows" docs on lots of places
but not everywhere while using just a string type was getting
confusing. This makes a new type to wrap up those rules, however
weird/historical they might be.
Change-Id: I142e85a8e38760988d6c0c91d0efecedade81b9b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So GUI clients don't need to poll for it.
We still poll internally (for now!) but that's still cheaper. And will
get much cheaper later, without having to modify clients once they
start sending this bit.
Change-Id: I36647b701c8d1fe197677e5eb76f6894e8ff79f7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Follow-up to #6467 and #6506.
LocalBackend knows the server-mode state, so move more auth checking
there, removing some bookkeeping from ipnserver.Server.
Updates #6417
Updates tailscale/corp#8051
Change-Id: Ic5d14a077bf0dccc92a3621bd2646bab2cc5b837
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This matches CanSSHD (TS_DISABLE_SSH_SERVER) for administratively
disabling the code on a node, regardless of local or server configs.
This can be configured in /etc/default/tailscaled on Linux,
%ProgramData%\Tailscale\tailscaled-env.txt on Windows,
or /etc/tailscale/tailscaled-env.txt on Synology. (see getPlatformEnvFile)
Also delete some dead code and tidy up some docs.
Change-Id: I79a87c03e33209619466ea8aeb0f6651afcb8789
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Centralize the fake GOOS stuff, start to use it more. To be used more
in the future.
Change-Id: Iabacfbeaf5fca0b53bf4d5dbcdc0367f05a205f9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
While reading the DNS code noticed that we were still using FallbackResolvers
in this code path but the comment was out of date.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Profile keys are not deleted but are instead set to `nil` which results
in getting a nil error and we were not handling that correctly.
Updates #713
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This commit implements `tailscale lock log [--limit N]`, which displays an ordered list
of changes to network-lock state in a manner familiar to `git log`.
Signed-off-by: Tom DNetto <tom@tailscale.com>
By always firing off a sync after enablement, the control plane should know the node's TKA head
at all times.
Signed-off-by: Tom DNetto <tom@tailscale.com>
We were not checking the currentUserID in all code paths that looped over
knownProfiles. This only impacted multi-user Windows setups.
Updates #713
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The earlier 5f6d63936f was not complete.
Updates tailscale/corp#7515
Change-Id: I35efca51d1584c48ef6834a7d29cd42d7c943628
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We would end up with duplicate profiles for the node as the UserID
would have chnaged. In order to correctly deduplicate profiles, we
need to look at both the UserID and the NodeID. A single machine can
only ever have 1 profile per NodeID and 1 profile per UserID.
Note: UserID of a Node can change when the node is tagged/untagged,
and the NodeID of a device can change when the node is deleted so we
need to check for both.
Updates #713
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The fix in 4fc8538e2 was sufficient for IPv6. Browsers (can?) send the
IPv6 literal, even without a port number, in brackets.
Updates tailscale/corp#7948
Change-Id: I0e429d3de4df8429152c12f251ab140b0c8f6b77
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I was too late with review feedback to 513780f4f8.
Updates tailscale/corp#7948
Change-Id: I8fa3b4eba4efaff591a2d0bfe6ab4795638b7c3a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were not updating the LoginProfile.UserProfile when a netmap
updated the UserProfile (e.g. when a node was tagged via the admin panel).
Updates #713
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This moves the NetworkLock key from a dedicated StateKey to be part of the persist.Persist struct.
This struct is stored as part for ipn.Prefs and is also the place where we store the NodeKey.
It also moves the ChonkDir from "/tka" to "/tka-profile/<profile-id>". The rename was intentional
to be able to delete the "/tka" dir if it exists.
This means that we will have a unique key per profile, and a unique directory per profile.
Note: `tailscale logout` will delete the entire profile, including any keys. It currently does not
delete the ChonkDir.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We do not need to wait for it to complete. And we might have to
call Shutdown from callback from the controlclient which might
already be holding a lock that Shutdown requires.
Updates #713
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Found by tests in another repo. TKA code wasn't always checking enough to be sure a node-key was set for the current state.
Signed-off-by: Tom DNetto <tom@tailscale.com>
The health package was turning into a rando dumping ground. Make a new
Warnable type instead that callers can request an instance of, and
then Set it locally in their code without the health package being
aware of all the things that are warnable. (For plenty of things the
health package will want to know details of how Tailscale works so it
can better prioritize/suppress errors, but lots of the warnings are
pretty leaf-y and unrelated)
This just moves two of the health warnings. Can probably move more
later.
Change-Id: I51e50e46eb633f4e96ced503d3b18a1891de1452
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This makes it so that the backend also restarts when users change,
otherwise an extra call to Start was required.
Updates #713
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Noticed this while debugging something else, we would reset all routes if
either `--advertise-exit-node` or `--advertise-routes` were set. This handles
correctly updating them.
Also added tests.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It left the envknob turned on which meant that running all the tests
in the package had different behavior than running just any one test.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Example output:
# Health check:
# - Some peers are advertising routes but --accept-routes is false
Also, move "tailscale status" health checks to the bottom, where they
won't be lost in large netmaps.
Updates #2053
Updates #6266
Change-Id: I5ae76a0cd69a452ce70063875cd7d974bfeb8f1a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Numerous issues have been filed concerning an inability to install and run
Tailscale headlessly in unattended mode, particularly after rebooting. The
server mode `Prefs` stored in `server-state.conf` were not being updated with
`Persist` state once the node had been succesfully logged in.
Users have been working around this by finagling with the GUI to make it force
a state rewrite. This patch makes that unnecessary by ensuring the required
server mode state is updated when prefs are updated by the control client.
Fixes https://github.com/tailscale/tailscale/issues/3186
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Even if the name is right, or is configured on a different port.
Updates tailscale/corp#7515
Change-Id: I8b721968f3241af10d98431e1b5ba075223e6cd3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
cmd/viewer couldn't deal with that map-of-map. Add a wrapper type
instead, which also gives us a place to add future stuff.
Updates tailscale/corp#7515
Change-Id: I44a4ca1915300ea8678e5b0385056f0642ccb155
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Leave only the HTTP/auth bits in localapi.
Change-Id: I8e23fb417367f1e0e31483e2982c343ca74086ab
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Not for end users (unless directed by support). Mostly for ease of
development for some upcoming webserver work.
Change-Id: I43acfed217514567acb3312367b24d620e739f88
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The //go:build syntax was introduced in Go 1.17:
https://go.dev/doc/go1.17#build-lines
gofmt has kept the +build and go:build lines in sync since
then, but enough time has passed. Time to remove them.
Done with:
perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build')
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It is currently a `ipn.PrefsView` which means when we do a JSON roundtrip,
we go from an invalid Prefs to a valid one.
This makes it a pointer, which fixes the JSON roundtrip.
This was introduced in 0957bc5af2.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This switches from using an atomic.Bool to a mutex for reasons that are
described in the commit, and should address the flakes that we're still
seeing.
Fixes#3020
Change-Id: I4e39471c0eb95886db03020ea1ccf688c7564a11
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
* Plumb disablement values through some of the internals of TKA enablement.
* Transmit the node's TKA hash at the end of sync so the control plane understands each node's head.
* Implement /machine/tka/disable RPC to actuate disablement on the control plane.
There is a partner PR for the control server I'll send shortly.
Signed-off-by: Tom DNetto <tom@tailscale.com>
This makes tags, creation time, exit node option and primary routes
for the current node exposed via `tailscale status --json`
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Poller.C and Poller.c were duplicated for one caller. Add an accessor
returning the receive-only version instead. It'll inline.
Poller.Err was unused. Remove.
Then Poller is opaque.
The channel usage and shutdown was a bit sketchy. Clean it up.
And document some things.
Change-Id: I5669e54f51a6a13492cf5485c83133bda7ea3ce9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Running corp/ipn#TestNetworkLockE2E has a 1/300 chance of failing, and
deskchecking suggests thats whats happening are two netmaps are racing each
other to be processed through tkaSyncIfNeededLocked. This happens in the
first place because we release b.mu during network RPCs.
To fix this, we make the tka sync logic an exclusive section, so two
netmaps will need to wait for tka sync to complete serially (which is what
we would want anyway, as the second run through probably wont need to
sync).
Signed-off-by: Tom DNetto <tom@tailscale.com>
Maisem Ali