tailscale

Commit Graph

Author	SHA1	Message	Date
David Anderson	44d71d1e42	wgengine/magicsock: fix race in test shutdown, again. We were returning an error almost, but not quite like errConnClosed in a single codepath, which could still trip the panic on reconfig in the test logic. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	8bacfe6a37	wgengine/magicsock: remove unused sendLogLimit limiter. Magicsock these days gets its logs limited by the global log limiter. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	e151b74f93	wgengine/magicsock: remove opts.SimulatedNetwork. It only existed to override one test-only behavior with a different test-only behavior, in both cases working around an annoying feature of our CI environments. Instead, handle that weirdness entirely in the test code, with a tweaked TestOnlyPacketListener that gets injected. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	58c1f7d51a	wgengine/magicsock: rename opts.PacketListener to TestOnlyPacketListener. The docstring said it was meant for use in tests, but it's specifically a special codepath that is _only_ used in tests, so make the claim stronger. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	8049063d35	wgengine/magicsock: rename discoEndpoint to just endpoint. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	f2d949e2db	wgengine/magicsock: fold findEndpoint into its only remaining caller. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	fe2f89deab	wgengine/magicsock: fix rare shutdown race in test. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	97693f2e42	wgengine/magicsock: delete legacy AddrSet endpoints. Instead of using the legacy codepath, teach discoEndpoint to handle peers that have a home DERP, but no disco key. We can still communicate with them, but only over DERP. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
slowy07	ac0353e982	fix: typo spelling grammar Signed-off-by: slowy07 <slowy.arfy@gmail.com>	3 years ago
Brad Fitzpatrick	37053801bb	wgengine/magicsock: restore a bit of logging on node becoming active Fixes #2695 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	39610aeb09	wgengine/magicsock: move debug knobs to their own file, compile out on iOS No need for these knobs on iOS where you can set the environment variables anyway. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f3c96df162	ipn/ipnstate: move tailscale status "active" determination to tailscaled Fixes #2579 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	b622c60ed0	derp,wgengine/magicsock: don't assume stringer is in $PATH for go:generate Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	8a3d52e882	wgengine/magicsock: use mono.Time magicsock makes multiple calls to Now per packet. Move to mono.Now. Changing some of the calls to use package mono has a cascading effect, causing non-per-packet call sites to also switch. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	4dbbd0aa4a	cmd/addlicense: add command to add licenseheaders to generated code And use it to make our stringer invocations match the existing code. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	c179580599	wgengine/magicsock: add debug envvar to force all traffic over DERP This would have been useful during debugging DERP issues recently. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	92077ae78c	wgengine/magicsock: make portmapping async Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Crawshaw	5f8ffbe166	magicsock: add SetPreferredPort method Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Josh Bleecher Snyder	ddf6c8c729	wgengine/magicsock: delete dead code Co-authored-by: Adrian Dewhurst <adrian@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	1ece91cede	go.mod: upgrade wireguard-windows, de-fork wireguard-go Pull in the latest version of wireguard-windows. Switch to upstream wireguard-go. This requires reverting all of our import paths. Unfortunately, this has to happen at the same time. The wireguard-go change is very low risk, as that commit matches our fork almost exactly. (The only changes are import paths, CI files, and a go.mod entry.) So if there are issues as a result of this commit, the first place to look is wireguard-windows changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w(.)\.Port = (.) -> $1 = $1.WithPort($2) \w(.)\.IP = (.) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	ebcd7ab890	wgengine: remove wireguard-go DeviceOptions We no longer need them. This also removes the 32 bytes of prefix junk before endpoints. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	aacb2107ae	all: add extra information to serialized endpoints magicsock.Conn.ParseEndpoint requires a peer's public key, disco key, and legacy ip/ports in order to do its job. We currently accomplish that by: * adding the public key in our wireguard-go fork * encoding the disco key as magic hostname * using a bespoke comma-separated encoding It's a bit messy. Instead, switch to something simpler: use a json-encoded struct containing exactly the information we need, in the form we use it. Our wireguard-go fork still adds the public key to the address when it passes it to ParseEndpoint, but now the code compensating for that is just a couple of simple, well-commented lines. Once this commit is in, we can remove that part of the fork and remove the compensating code. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	ddd85b9d91	wgengine/magicsock: rename discoEndpoint.wgEndpointHostPort to wgEndpoint Fields rename only. Part of the general effort to make our code agnostic about endpoint formatting. It's just a name, but it will soon be a misleading one; be more generic. Do this as a separate commit because it generates a lot of whitespace changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	bc68e22c5b	all: s/CreateEndpoint/ParseEndpoint/ in docs Upstream wireguard-go renamed the interface method from CreateEndpoint to ParseEndpoint. I missed some comments. Fix them. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	9d542e08e2	wgengine/magicsock: always run ReceiveIPv6 One of the consequences of the bind refactoring in `6f23087175` is that attempting to bind an IPv6 socket will always result in c.pconn6.pconn being non-nil. If the bind fails, it'll be set to a placeholder packet conn that blocks forever. As a result, we can always run ReceiveIPv6 and health check it. This removes IPv4/IPv6 asymmetry and also will allow health checks to detect any IPv6 receive func failures. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	fe50ded95c	health: track whether we have a functional udp4 bind Suggested-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	7dc7078d96	wgengine/magicsock: use netaddr.IP in listenPacket It must be an IP address; enforce that at the type level. Suggested-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	3c543c103a	wgengine/magicsock: unify initial bind and rebind We had two separate code paths for the initial UDP listener bind and any subsequent rebinds. IPv6 got left out of the rebind code. Rather than duplicate it there, unify the two code paths. Then improve the resulting code: * Rebind had nested listen attempts to try the user-specified port first, and then fall back to :0 if that failed. Convert that into a loop. * Initial bind tried only the user-specified port. Rebind tried the user-specified port and 0. But there are actually three ports of interest: The one the user specified, the most recent port in use, and 0. We now try all three in order, as appropriate. * In the extremely rare case in which binding to port 0 fails, use a dummy net.PacketConn whose reads block until close. This will keep the wireguard-go receive func goroutine alive. As a pleasant side-effect of this, if we decide that we need to resuscitate #1796, it will now be much easier. Fixes #1799 Co-authored-by: David Anderson <danderson@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	8fb66e20a4	wgengine/magicsock: remove DefaultPort const Assume it'll stay at 0 forever, so hard-code it and delete code conditional on it being non-0. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	a8f61969b9	wgengine/magicsock: remove context arg from listenPacket It was set to context.Background by all callers, for the same reasons. Set it locally instead, to simplify call sites. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	744de615f1	health, wgenegine: fix receive func health checks for the fourth time The old implementation knew too much about how wireguard-go worked. As a result, it missed genuine problems that occurred due to unrelated bugs. This fourth attempt to fix the health checks takes a black box approach. A receive func is healthy if one (or both) of these conditions holds: * It is currently running and blocked. * It has been executed recently. The second condition is required because receive functions are not continuously executing. wireguard-go calls them and then processes their results before calling them again. There is a theoretical false positive if wireguard-go go takes longer than one minute to process the results of a receive func execution. If that happens, we have other problems. Updates #1790 Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	0d4c8cb2e1	health: delete ReceiveFunc health checks They were not doing their job. They need yet another conceptual re-think. Start by clearing the decks. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	8d7f7fc7ce	health, wgenegine: fix receive func health checks yet again The existing implementation was completely, embarrassingly conceptually broken. We aren't able to see whether wireguard-go's receive function goroutines are running or not. All we can do is model that based on what we have done. This commit fixes that model. Fixes #1781 Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	5835a3f553	health, wgengine/magicsock: avoid receive function false positives Avery reported a sub-ms health transition from "receiveIPv4 not running" to "ok". To avoid these transient false-positives, be more precise about the expected lifetime of receive funcs. The problematic case is one in which they were started but exited prior to a call to connBind.Close. Explicitly represent started vs running state, taking care with the order of updates. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	f845aae761	health: track whether magicsock receive functions are running Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	48e30bb8de	wgengine/magicsock: remove named return Doesn't add anything. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	a2a2c0ce1c	wgengine/magicsock: fix two comments Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	b1e624ef04	wgengine/magicsock: remove unnecessary type assertions Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	98714e784b	wgengine/magicsock: improve Rebind logging We were accidentally logging oldPort -> oldPort. Log oldPort as well as c.port; if we failed to get the preferred port in a previous rebind, oldPort might differ from c.port. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	15ceacc4c5	wgengine/magicsock: accept a host and port instead of an addr in listenPacket This simplifies call sites and prevents accidental failure to use net.JoinHostPort. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Brad Fitzpatrick	b993d9802a	ipn/ipnlocal, etc: require file sharing capability to send/recv files tailscale/corp#1582 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	762180595d	ipn/ipnstate: add PeerStatus.TailscaleIPs slice, deprecate TailAddr Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	34d2f5a3d9	tailcfg: add Endpoint, EndpointType, MapRequest.EndpointType Track endpoints internally with a new tailcfg.Endpoint type that includes a typed netaddr.IPPort (instead of just a string) and includes a type for how that endpoint was discovered (STUN, local, etc). Use []tailcfg.Endpoint instead of []string internally. At the last second, send it to the control server as the existing []string for endpoints, but also include a new parallel MapRequest.EndpointType []tailcfg.EndpointType, so the control server can start filtering out less-important endpoint changes from new-enough clients. Notably, STUN-discovered endpoints can be filtered out from 1.6+ clients, as they can discover them amongst each other via CallMeMaybe disco exchanges started over DERP. And STUN endpoints change a lot, causing a lot of MapResposne updates. But portmapped endpoints are worth keeping for now, as they they work right away without requiring the firewall traversal extra RTT dance. End result will be less control->client bandwidth. (despite negligible increase in client->control bandwidth) Updates tailscale/corp#1543 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	ba72126b72	wgengine/magicsock: remove RebindingUDPConn.FakeClosed It existed to work around the frequent opening and closing of the conn.Bind done by wireguard-go. The preceding commit removed that behavior, so we can simply close the connections when we are done with them. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	b3ceca1dd7	wgengine/...: split into multiple receive functions Upstream wireguard-go has changed its receive model. NewDevice now accepts a conn.Bind interface. The conn.Bind is stateless; magicsock.Conns are stateful. To work around this, we add a connBind type that supports cheap teardown and bring-up, backed by a Conn. The new conn.Bind allows us to specify a set of receive functions, rather than having to shoehorn everything into ReceiveIPv4 and ReceiveIPv6. This lets us plumbing DERP messages directly into wireguard-go, instead of having to mux them via ReceiveIPv4. One consequence of the new conn.Bind layer is that closing the wireguard-go device is now indistinguishable from the routine bring-up and tear-down normally experienced by a conn.Bind. We thus have to explicitly close the magicsock.Conn when the close the wireguard-go device. One downside of this change is that we are reliant on wireguard-go to call receiveDERP to process DERP messages. This is fine for now, but is perhaps something we should fix in the future. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	1df162b05b	wgengine/magicsock: adapt CreateEndpoint signature to match wireguard-go Part of a temporary change to make merging wireguard-go easier. See https://github.com/tailscale/wireguard-go/pull/45. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	81143b6d9a	ipn/ipnlocal: start of peerapi between nodes Also some necessary refactoring of the ipn/ipnstate too. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c99f260e40	wgengine/magicsock: prefer IPv6 transport if roughly equivalent latency Fixes #1566 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	9643d8b34d	wgengine/magicsock: add an addrLatency type to combine an IPPort+time.Duration Updates #1566 (but no behavior changes as of this change) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago

1 2 3 4 5 ...

313 Commits (73280595a8880bdca12d406fb3b18e6e96e8bf73)