Avoids the need to pipe a web client dev flag through the tailscaled
command.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds a new Mode to the web server, indicating the specific
scenario the constructed server is intended to be run in. Also
starts filling this from the cli/web and ipn/ipnlocal callers.
From cli/web this gets filled conditionally based on whether the
preview web client node cap is set. If not set, the existing
"legacy" client is served. If set, both a login/lobby and full
management client are started (in "login" and "manage" modes
respectively).
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The design changed during integration and testing, resulting in the
earlier implementation growing in the appc package to be intended now
only for the sniproxy implementation. That code is moved to it's final
location, and the current App Connector code is now renamed.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
Now uses webClientAtomicBool as the source of truth for whether the web
client should be running in tailscaled, with it updated when either the
RunWebClient pref or CapabilityPreviewWebClient node capability changes.
This avoids requiring holding the LocalBackend lock on each call to
ShouldRunWebClient to check for the CapabilityPreviewWebClient value.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The AppConnector is now configured by the mapcap from the control plane.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
An EmbeddedAppConnector is added that when configured observes DNS
responses from the PeerAPI. If a response is found matching a configured
domain, routes are advertised when necessary.
The wiring from a configuration in the netmap capmap is not yet done, so
while the connector can be enabled, no domains can yet be added.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
WebClientShutdown tries to acquire the b.mu lock, so run it in a go
routine so that it can finish shutdown after setPrefsLockedOnEntry is
finished. This is the same reason b.sshServer.Shutdown is run in a go
routine.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
For consistency and clarity around what the LocalBackend.web field
is used for.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
instead of starting a separate server listening on a particular port,
use the TCPHandlerForDst method to intercept requests for the special
web client port (currently 5252, probably configurable later).
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
This is not currently exposed as a user-settable preference through
`tailscale up` or `tailscale set`. Instead, the preference is set when
turning the web client on and off via localapi. In a subsequent commit,
the pref will be used to automatically start the web client on startup
when appropriate.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Allows for serving the web interface from tailscaled, with the
ability to start and stop the server via localapi endpoints
(/web/start and /web/stop).
This will be used to run the new full management web client,
which will only be accessible over Tailscale (with an extra auth
check step over noise) from the daemon. This switch also allows
us to run the web interface as a long-lived service in environments
where the CLI version is restricted to CGI, allowing us to manage
certain auth state in memory.
ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for
ios builds to satisfy ios restriction from adding "text/template"
and "html/template" dependencies.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
On Windows, the idiomatic way to check access on a named pipe is for
the server to impersonate the client on its current OS thread, perform
access checks using the client's access token, and then revert the OS
thread's access token back to its true self.
The access token is a better representation of the client's rights than just
a username/userid check, as it represents the client's effective rights
at connection time, which might differ from their normal rights.
This patch updates safesocket to do the aforementioned impersonation,
extract the token handle, and then revert the impersonation. We retain
the token handle for the remaining duration of the connection (the token
continues to be valid even after we have reverted back to self).
Since the token is a property of the connection, I changed ipnauth to wrap
the concrete net.Conn to include the token. I then plumbed that change
through ipnlocal, ipnserver, and localapi as necessary.
I also added a PermitLocalAdmin flag to the localapi Handler which I intend
to use for controlling access to a few new localapi endpoints intended
for configuring auto-update.
Updates https://github.com/tailscale/tailscale/issues/755
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
In addition to the new policy keys for the new options, some
already-in-use but missing policy keys are also being added to
util/syspolicy.
Updates ENG-2133
Change-Id: Iad08ca47f839ea6a65f81b76b4f9ef21183ebdc6
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
clientupdate.Updater will have a non-nil Update func in a few cases
where it doesn't actually perform an update:
* on Arch-like distros, where it prints instructions on how to update
* on macOS app store version, where it opens the app store page
Add a new clientupdate.Arguments field to cause NewUpdater to fail when
we hit one of these cases. This results in c2n updates being "not
supported" and `tailscale set --auto-update` returning an error.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
It would end up resetting whatever hostinfo we had constructed
and leave the backend statemachine in a broken state.
This fixes that by storing the PushDeviceToken on the LocalBackend
and populating it on Hostinfo before passing it to controlclient.
Updates tailscale/corp#8940
Updates tailscale/corp#15367
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The value being passed was the same as whats on b.hostinfo, so just
use that directly.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a check to prevent changes to ServeConfig if tailscaled
is run with a Locked config.
Missed in 1fc3573446.
Updates #1412
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Ensure that when a userspace proxy config is reloaded,
connections for any removed proxies are safely closed
Updates tailscale/tailscale#9725
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Initiates http/h2c transport for userspace proxy
backend lazily and at most once.
Updates tailscale/tailscale#9725
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Updates userspace proxy to detect plaintext grpc requests
using the preconfigured host prefix and request's content
type header and ensure that these will be proxied over h2c.
Updates tailscale/tailscale#9725
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
While the previous logic was correct, it did not perform well.
Resuming is a dance between the client and server, where
1. the client requests hashes for a partial file,
2. the server then computes those hashes,
3. the client computes hashes locally and compares them.
4. goto 1 while the partial file still has data
While step 2 is running, the client is sitting idle.
While step 3 is running, the server is sitting idle.
By streaming over the block hash immediately after the server
computes it, the client can start checking the hash,
while the server works on the next hash (in a pipelined manner).
This performs dramatically better and also uses less memory
as we don't need to hold a list of hashes, but only need to
handle one hash at a time.
There are two detriments to this approach:
* The HTTP API relies on a JSON stream,
which is not a standard REST-like pattern.
However, since we implement both client and server,
this is fine.
* While the stream is on-going, we hold an open file handle
on the server side while the file is being hashed.
On really slow streams, this could hold a file open forever.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
Minor fixes:
* The branch for listing or hashing partial files was inverted.
* The host for peerapi call needs to be real (rather than bogus).
* Handle remote peers that don't support resuming.
* Make resume failures non-fatal (since we can still continue).
This was tested locally, end-to-end system test is future work.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
Two bug fixes:
1. when tailscale update is executed as root, `os.UserCacheDir` may
return an error because `$XDG_CACHE_HOME` and `$HOME` are not set;
fallback to `os.TempDir` in those cases
2. on some weird distros (like my EndeavourOS), `/usr/sbin` is just a
symlink to `/usr/bin`; when we resolve `tailscale` binary path from
`tailscaled`, allow `tailscaled` to be in either directory
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
File resumption requires keeping partial files around for some time,
but we must still eventually delete them if never resumed.
Thus, we implement asynchronous file deletion, which could
spawn a background goroutine to delete the files.
We also use the same mechanism for deleting files on Windows,
where a file can't be deleted if there is still an open file handle.
We can enqueue those with the asynchronous file deleter as well.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The old code would always retain value `true` if it was set once, even
if you then change `prefs.AutoUpdate.Apply` to `false`.
Instead of using the previous value, use the default (envknob) value to
OR with.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change:
* adds a partial files peerAPI endpoint to get a list of partial files
* adds a helper function to extract the basename of a file
* updates the peer put peerAPI endpoint
* updates the file put localapi endpoint to allow resume functionality
Updates #14772
Signed-off-by: Rhea Ghosh <rhea@tailscale.com>
The Sparkle-based update is not quite working yet. Make `NewUpdater`
return `ErrUnsupported` for it to avoid the proliferation of exceptions
up the stack.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This commit changes the PostureChecking syspolicy key to be a
PreferenceOption(user-defined, always, never) instead of Bool.
This aligns better with the defaults implementation on macOS allowing
CLI arguments to be read when user-defined or no defaults is set.
Updates #tailscale/tailscale/5902
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
We add the following API:
* type FileChecksums
* type Checksum
* func Manager.PartialFiles
* func Manager.HashPartialFile
* func ResumeReader
The Manager methods provide the ability to query for partial files
and retrieve a list of checksums for a given partial file.
The ResumeReader function is a helper that wraps an io.Reader
to discard content that is identical locally and remotely.
The FileChecksums type represents the checksums of a file
and is safe to JSON marshal and send over the wire.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
We were eagerly doing a synchronous renewal of the cert while
trying to serve traffic. Instead of that, just do the cert
renewal in the background and continue serving traffic as long
as the cert is still valid.
This regressed in c1ecae13ab when
we introduced ARI support and were trying to make the experience
of `tailscale cert` better. However, that ended up regressing
the experience for tsnet as it would not always doing the renewal
synchronously.
Fixes#9783
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Changes made:
* Move all HTTP related functionality from taildrop to ipnlocal.
* Add two arguments to taildrop.Manager.PutFile to specify
an opaque client ID and a resume offset (both unused for now).
* Cleanup the logic of taildrop.Manager.PutFile
to be easier to follow.
* Implement file conflict handling where duplicate files are renamed
(e.g., "IMG_1234.jpg" -> "IMG_1234 (2).jpg").
* Implement file de-duplication where "renaming" a partial file
simply deletes it if it already exists with the same contents.
* Detect conflicting active puts where a second concurrent put
results in an error.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
These log paths were actually unexpected until the refactor in
fe95d81b43. This moves the logs
to the callsites where they are actually unexpected.
Fixes#9670
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This commit adds support for getting serial numbers from SMBIOS
on Windows/Linux (and BSD) using go-smbios.
Updates #5902
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
Changes made:
* Unexport declarations specific to internal taildrop functionality.
* Document all exported functionality.
* Move TestRedactErr to the taildrop package.
* Rename and invert Handler.DirectFileDoFinalRename as AvoidFinalRename.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This is being moved to taildrop, so clean it up to stop depending
on so much unreleated functionality by removing a dependency
on peerAPIHandler.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
Over time all taildrop functionality will be contained in the
taildrop package. This will include end to end unit tests. This is
simply the first smallest piece to move over.
There is no functionality change in this commit.
Updates tailscale/corp#14772
Signed-off-by: Rhea Ghosh <rhea@tailscale.com>
Co-authored-by: Joseph Tsai <joetsai@tailscale.com>
Advertise it on Android (it looks like it already works once advertised).
And both advertise & likely fix it on iOS. Yet untested.
Updates #9672
Change-Id: If3b7e97f011dea61e7e75aff23dcc178b6cf9123
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This optionally uploads MAC address(es) to control, then adds a
c2n handler so control can ask a node to send a WoL packet.
Updates #306
RELNOTE=now supports waking up peer nodes on your LAN via Wake-on-LAN packets
Change-Id: Ibea1275fcd2048dc61d7059039abfbaf1ad4f465
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Make the 'tailscale debug component-logs' command print the component names for
which extra logging can be turned on, for easier discoverability of debug
functions.
Updates #cleanup
Co-authored-by: Paul Scott <paul@tailscale.com>
Signed-off-by: Val <valerie@tailscale.com>
Thanks to @qur and @eric for debugging!
Fixes#6973
Change-Id: Ib2cf8f030cf595cc73dd061c72e78ac19f5fae5d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Control sends ExitNodeDNSResolvers when configured for IsWireGuardOnly
nodes that are to be used as the default resolver with a lower
precedence than split DNS, and a lower precedence than "Override local
DNS", but otherwise before local DNS is used when the exit node is in
use.
Neither of the below changes were problematic, but appeared so alongside
a number of other client and external changes. See tailscale/corp#14809.
Reland ea9dd8fabc.
Reland d52ab181c3.
Updates #9377
Updates tailscale/corp#14809
Signed-off-by: James Tucker <james@tailscale.com>
This PR ensures zombie foregrounds are shutdown if a new
ServeConfig is created that wipes the ongoing foreground ones.
For example, "tailscale serve|funnel reset|off" should close
all open sessions.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
For loading testing & profiling the cost of full netmap updates.
Updates #1909
Change-Id: I0afdf5de9967f8d95c7f81d5b531ed1c92c3208f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This would've prevented #9470.
This used to pass, fails as of 9538e9f970, and passes again
once #9472 is in.
Updates #9470
Change-Id: Iab97666f7a318432fb3b6372a177ab50c55d4697
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
9538e9f970 broke LocalBackend.WhoIs
where you can no longer lookup yourself in WhoIs.
This occurs because the LocalBackend.peers map only contains peers.
If we fail to lookup a peer, double-check whether it is ourself.
Fixes#9470
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
The initial implementation directly mirrored the behavior of Tailscale
exit nodes, where the WireGuard exit node DNS took precedence over other
configuration.
This adjusted implementation treats the WireGuard DNS
resolvers as a lower precedence default resolver than the tailnet
default resolver, and allows split DNS configuration as well.
This also adds test coverage to the existing DNS selection behavior with
respect to default resolvers and split DNS routes for Tailscale exit
nodes above cap 25. There may be some refinement to do in the logic in
those cases, as split DNS may not be working as we intend, though that
would be a pre-existing and separate issue.
Updates #9377
Signed-off-by: James Tucker <james@tailscale.com>
This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol
through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing
IPv6 NAT support to/from peers.
A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-991
Like PeerCapMap, add a field to `tailcfg.Node` which provides
a map of Capability to raw JSON messages which are deferred to be
parsed later by the application code which cares about the specific
capabilities. This effectively allows us to prototype new behavior
without having to commit to a schema in tailcfg, and it also opens up
the possibilities to develop custom behavior in tsnet applications w/o
having to plumb through application specific data in the MapResponse.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have some flaky integration tests elsewhere that have no one place
to ask about the state of the world. This makes LocalBackend be that
place (as it's basically there anyway) but doesn't yet add the ForTest
accessor method.
This adds a LocalBackend.peers map[NodeID]NodeView that is
incrementally updated as mutations arrive. And then we start moving
away from using NetMap.Peers at runtime (UpdateStatus no longer uses
it now). And remove another copy of NodeView in the LocalBackend
nodeByAddr map. Change that to point into b.peers instead.
Future changes will then start streaming whole-node-granularity peer
change updates to WatchIPNBus clients, tracking statefully per client
what each has seen. This will get the GUI clients from receiving less
of a JSON storm of updates all the time.
Updates #1909
Change-Id: I14a976ca9f493bdf02ba7e6e05217363dcf422e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NetworkMap.Addresses is redundant with the SelfNode.Addresses. This
works towards a TODO to delete NetworkMap.Addresses and replace it
with a method.
This is similar to #9389.
Updates #cleanup
Change-Id: Id000509ca5d16bb636401763d41bdb5f38513ba0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* Remove unnecessary mutexes (there's no concurrency)
* Simplify LocalBackend.UpdateStatus using the StatusBuilder.WantPeers
field that was added in 0f604923d3, removing passing around some
method values into func args. And then merge two methods.
More remains, but this is a start.
Updates #9433
Change-Id: Iaf2d7ec6e4e590799f00bae185465a4fd089b822
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This enables installing default resolvers specified by
tailcfg.Node.ExitNodeDNSResolvers when the exit node is selected.
Updates #9377
Signed-off-by: James Tucker <james@tailscale.com>
It has one user (LocalBackend) which can ask magicsock itself.
Updates #cleanup
Change-Id: I8c03cbb1e5ba57b0b442621b5fa467030c14a2e2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
(continuing the mission of removing rando methods from the Engine
interface that we don't need anymore)
Updates #cleanup
Change-Id: Id5190917596bf04d7185c3b331a852724a3f5a16
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We always have one. Stop pretending we might not.
Instead, add one early panic in NewLocalBackend if we actually don't.
Updates #cleanup
Change-Id: Iba4b78ed22cb6248e59c2b01a79355ca7a200ec8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
LocalBackend can talk to magicsock on its own to do this without
the "Engine" being involved.
(Continuing a little side quest of cleaning up the Engine
interface...)
Updates #cleanup
Change-Id: I8654acdca2b883b1bd557fdc0cfb90cd3a418a62
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It had exactly one user: netstack. Just have LocalBackend notify
netstack when here's a new netmap instead, simplifying the bloated
Engine interface that has grown a bunch of non-Engine-y things.
(plenty of rando stuff remains after this, but it's a start)
Updates #cleanup
Change-Id: I45e10ab48119e962fc4967a95167656e35b141d8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Currently only the top four most popular changes: endpoints, DERP
home, online, and LastSeen.
Updates #1909
Change-Id: I03152da176b2b95232b56acabfb55dcdfaa16b79
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I missed connecting some controlknobs.Knobs pieces in 4e91cf20a8
resulting in that breaking control knobs entirely.
Whoops.
The fix in ipn/ipnlocal (where it makes a new controlclient) but to
atone, I also added integration tests. Those integration tests use
a new "tailscale debug control-knobs" which by itself might be useful
for future debugging.
Updates #9351
Change-Id: Id9c89c8637746d879d5da67b9ac4e0d2367a3f0d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR adds optimistic concurrency control in the local client and
api in order to ensure multiple writes of the ServeConfig do not
conflict with each other.
Updates #9273
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Previously two tsnet nodes in the same process couldn't have disjoint
sets of controlknob settings from control as both would overwrite each
other's global variables.
This plumbs a new controlknobs.Knobs type around everywhere and hangs
the knobs sent by control on that instead.
Updates #9351
Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All platforms use it at this point, including iOS which was the
original hold out for memory reasons. No more reason to make it
optional.
Updates #9332
Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Cache the last `ClientVersion` value that was received from coordination
server and pass it in the localapi `/status` response.
When running `tailscale status`, print a message if `RunningAsLatest` is
`false`.
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Log some progress info to make updates more debuggable. Also, track
whether an active update is already started and return an error if
a concurrent update is attempted.
Some planned future PRs:
* add JSON output to `tailscale update`
* use JSON output from `tailscale update` to provide a more detailed
status of in-progress update (stage, download progress, etc)
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This PR adds a new field to the serve config that can be used to identify which serves are in "foreground mode" and then can also be used to ensure they do not get persisted to disk so that if Tailscaled gets ungracefully shutdown, the reloaded ServeConfig will not have those ports opened.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR removes the per request logging to the CLI as the CLI
will not be displaying those logs initially.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR adds a new field to the ServeConfig which maps
WatchIPNBus session ids to foreground serve configs.
The PR also adds a DeleteForegroundSession method to ensure the config
gets cleaned up on sessions ending.
Note this field is not currently used but will be in follow up work.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
It would acquire the lock, calculate `nextState`, relase
the lock, then call `enterState` which would acquire the lock
again. There were obvious races there which could lead to
nil panics as seen in a test in a different repo.
```
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x2 addr=0x70 pc=0x1050f2c7c]
goroutine 42240 [running]:
tailscale.com/ipn/ipnlocal.(*LocalBackend).enterStateLockedOnEntry(0x14002154e00, 0x6)
tailscale.com/ipn/ipnlocal/local.go:3715 +0x30c
tailscale.com/ipn/ipnlocal.(*LocalBackend).enterState(0x14002154e00?, 0x14002e3a140?)
tailscale.com/ipn/ipnlocal/local.go:3663 +0x8c
tailscale.com/ipn/ipnlocal.(*LocalBackend).stateMachine(0x14001f5e280?)
tailscale.com/ipn/ipnlocal/local.go:3836 +0x2c
tailscale.com/ipn/ipnlocal.(*LocalBackend).setWgengineStatus(0x14002154e00, 0x14002e3a190, {0x0?, 0x0?})
tailscale.com/ipn/ipnlocal/local.go:1193 +0x4d0
tailscale.com/wgengine.(*userspaceEngine).RequestStatus(0x14005d90300)
tailscale.com/wgengine/userspace.go:1051 +0x80
tailscale.com/wgengine.NewUserspaceEngine.func2({0x14002e3a0a0, 0x2, 0x140025cce40?})
tailscale.com/wgengine/userspace.go:318 +0x1a0
tailscale.com/wgengine/magicsock.(*Conn).updateEndpoints(0x14002154700, {0x105c13eaf, 0xf})
tailscale.com/wgengine/magicsock/magicsock.go:531 +0x424
created by tailscale.com/wgengine/magicsock.(*Conn).ReSTUN in goroutine 42077
tailscale.com/wgengine/magicsock/magicsock.go:2142 +0x3a4
```
Updates tailscale/corp#14480
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This PR adds a SessionID field to the ipn.Notify struct so that
ipn buses can identify a session and register deferred clean up
code in the future. The first use case this is for is to be able to
tie foreground serve configs to a specific watch session and ensure
its clean up when a connection is closed.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
If Start was called multiple times concurrently, it would
create a new client and shutdown the previous one. However
there was a race possible between shutting down the old one
and assigning a new one where the concurent goroutine may
have assigned another one already and it would leak.
Updates tailscale/corp#14471
Signed-off-by: Maisem Ali <maisem@tailscale.com>
resetControlClientLocked is called while b.mu was held and
would call cc.Shutdown which would wait for the observer queue
to drain.
However, there may be active callbacks from cc already waiting for
b.mu resulting in a deadlock.
This makes it so that resetControlClientLocked does not call
Shutdown, and instead just returns the value.
It also makes it so that any status received from previous cc
are ignored.
Updates tailscale/corp#12827
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The flags are hidden for now. Adding propagation to tailscaled and
persistence only. The prefs field is wrapped in a struct to allow for
future expansion (like update schedule).
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
> **Note**
> Behind the `TAILSCALE_USE_WIP_CODE` flag
In preparing for incoming CLI changes, this PR merges the code path for the `serve` and `funnel` subcommands.
See the parent issue for more context.
The following commands will run in foreground mode when using the environment flag.
```
tailscale serve localhost:3000
tailscae funnel localhost:3000
```
Replaces #9134
Updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Co-authored-by: Marwan Sulaiman <marwan@tailscale.com>
During Shutdown of an ephemeral node, we called Logout (to best effort
delete the node earlier), which then called back into
resetForProfileChangeLockedOnEntry, which then tried to Start
again. That's all a waste of work during shutdown and complicates
other cleanups coming later.
Updates #cleanup
Change-Id: I0b8648cac492fc70fa97c4ebef919bbe352c5d7b
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We already removed the async API, make it more sync and remove
the FinishLogout state too.
This also makes the callback be synchronous again as the previous
attempt was trying to work around the logout callback resulting
in a client shutdown getting blocked forever.
Updates #3833
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We have cases where the SetControlClientStatus would result in
a Shutdown call back into the auto client that would block
forever. The right thing to do here is to fix the LocalBackend
state machine but thats a different dumpster fire that we
are slowly making progress towards.
This makes it so that the SetControlClientStatus happens in a
different goroutine so that calls back into the auto client
do not block.
Also add a few missing mu.Unlocks in LocalBackend.Start.
Updates #9181
Signed-off-by: Maisem Ali <maisem@tailscale.com>
* don't try to re-Start (and thus create a new client) during Shutdown
* in tests, wait for controlclient to fully shut down when replacing it
* log a bit more
Updates tailscale/corp#14139
Updates tailscale/corp#13175 etc
Updates #9178 and its flakes.
Change-Id: I3ed2440644dc157aa6e616fe36fbd29a6056846c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
They were entirely redundant and 1:1 with the status field
so this turns them into methods instead.
Updates #cleanup
Updates #1909
Change-Id: I7d939750749edf7dae4c97566bbeb99f2f75adbc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For now the method has only one interface (the same as the func it's
replacing) but it will grow, eventually with the goal to remove the
controlclient.Status type for most purposes.
Updates #1909
Change-Id: I715c8bf95e3f5943055a94e76af98d988558a2f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Printing out JSON representation things in log output is pretty common.
Updates #cleanup
Change-Id: Ife2d2e321a18e6e1185efa8b699a23061ac5e5a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Upcoming work on incremental netmap change handling will require some
replumbing of which subsystems get notified about what. Done naively,
it could break "tailscale status --json" visibility later. To make sure
I understood the flow of all the updates I was rereading the status code
and realized parts of ipnstate.Status were being populated by the wrong
subsystems.
The engine (wireguard) and magicsock (data plane, NAT traveral) should
only populate the stuff that they uniquely know. The WireGuard bits
were fine but magicsock was populating stuff stuff that LocalBackend
could've better handled, so move it there.
Updates #1909
Change-Id: I6d1b95d19a2d1b70fbb3c875fac8ea1e169e8cb0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR addresses a number of the follow ups from PR #8491 that were written
after getting merged.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
It was in SelfNode.Hostinfo anyway. The redundant copy was just
costing us an allocation per netmap (a Hostinfo.Clone).
Updates #1909
Change-Id: Ifac568aa5f8054d9419828489442a0f4559bc099
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds ability to start Funnel in the foreground and stream incoming
connections. When foreground process is stopped, Funnel is turned
back off for the port.
Exampe usage:
```
TAILSCALE_FUNNEL_V2=on tailscale funnel 8080
```
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
And optimize the Persist setting a bit, allocating later and only mutating
fields when there's been a Node change.
Updates #1909
Change-Id: Iaddfd9e88ef76e1d18e8d0a41926eb44d0955312
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In b987b2ab18 (2021-01-12) when we introduced sharing we mapped
the sharer to the userid at a low layer, mostly to fix the display of
"tailscale status" and the client UIs, but also some tests.
The commit earlier today, 7dec09d169, removed the 2.5yo option
to let clients disable that automatic mapping, as clearly we were never
getting around to it.
This plumbs the Sharer UserID all the way to ipnstatus so the CLI
itself can choose to print out the Sharer's identity over the node's
original owner.
Then we stop mangling Node.User and let clients decide how they want
to render things.
To ease the migration for the Windows GUI (which currently operates on
tailcfg.Node via the NetMap from WatchIPNBus, instead of PeerStatus),
a new method Node.SharerOrUser is added to do the mapping of
Sharer-else-User.
Updates #1909
Updates tailscale/corp#1183
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I screwed this up in 58a4fd43d as I expected. I even looked out for
cases like this (because this always happens) and I still missed
it. Vet doesn't flag these because they're not the standard printf
funcs it knows about. TODO: make our vet recognize all our
"logger.Logf" types.
Updates #8948
Change-Id: Iae267d5f81da49d0876b91c0e6dc451bf7dcd721
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Make it just a views.Slice[netip.Prefix] instead of its own named type.
Having the special case led to circular dependencies in another WIP PR
of mine.
Updates #8948
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now a nodeAttr: ForceBackgroundSTUN, DERPRoute, TrimWGConfig,
DisableSubnetsIfPAC, DisableUPnP.
Kept support for, but also now a NodeAttr: RandomizeClientPort.
Removed: SetForceBackgroundSTUN, SetRandomizeClientPort (both never
used, sadly... never got around to them. But nodeAttrs are better
anyway), EnableSilentDisco (will be a nodeAttr later when that effort
resumes).
Updates #8923
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We would only look for duplicate profiles when a new login
occurred but when using `--force-reauth` we could switch
users which would end up with duplicate profiles.
Updates #7726
Signed-off-by: Maisem Ali <maisem@tailscale.com>
There are a few situations where we end up with duplicate profiles.
Add tests to identify those situations, fix in followup.
Updates #7726
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was being modified in two places in Direct for the auth routine
and then in LocalBackend when a new NetMap was received. This was
confusing, so make Direct also own changes to Persist when a new
NetMap is received.
Updates #7726
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds the capability to pad disco ping message payloads to reach a
specified size. It also plumbs it through to the tailscale ping -size
flag.
Disco pings used for actual endpoint discovery do not use this yet.
Updates #311.
Signed-off-by: salman <salman@tailscale.com>
Co-authored-by: Val <valerie@tailscale.com>
Rather than make each ipn.StateStore implementation guard against
useless writes (a write of the same value that's already in the
store), do writes via a new wrapper that has a fast path for the
unchanged case.
This then fixes profileManager's flood of useless writes to AWS SSM,
etc.
Updates #8785
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The revoke-keys command allows nodes with tailnet lock keys
to collaborate to erase the use of a compromised key, and remove trust
in it.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-1848
While our `shouldStartDomainRenewal` check is correct, `getCertPEM`
would always bail if the existing cert is not expired. Add the same
`shouldStartDomainRenewal` check to `getCertPEM` to make it proceed with
renewal when existing certs are still valid but should be renewed.
The extra check is expensive (ARI request towards LetsEncrypt), so cache
the last check result for 1hr to not degrade `tailscale serve`
performance.
Also, asynchronous renewal is great for `tailscale serve` but confusing
for `tailscale cert`. Add an explicit flag to `GetCertPEM` to force a
synchronous renewal for `tailscale cert`.
Fixes#8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change introduces a new subcommand, `exit-node`, along with a
subsubcommand of `list` and a `--filter` flag.
Exit nodes without location data will continue to be displayed when
`status` is used. Exit nodes with location data will only be displayed
behind `exit-node list`, and in status if they are the active exit node.
The `filter` flag can be used to filter exit nodes with location data by
country.
Exit nodes with Location.Priority data will have only the highest
priority option for each country and city listed. For countries with
multiple cities, a <Country> <Any> option will be displayed, indicating
the highest priority node within that country.
Updates tailscale/corp#13025
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Define PeerCapabilty and PeerCapMap as the new way of sending down
inter-peer capability information.
Previously, this was unstructured and you could only send down strings
which got too limiting for certain usecases. Instead add the ability
to send down raw JSON messages that are opaque to Tailscale but provide
the applications to define them however they wish.
Also update accessors to use the new values.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
When using a custom http port like 8080, this was resulting in a
constructed hostname of `host.tailnet.ts.net:8080.tailnet.ts.net` when
looking up the serve handler. Instead, strip off the port before adding
the MagicDNS suffix.
Also use the actual hostname in `serve status` rather than the literal
string "host".
Fixes#8635
Signed-off-by: Will Norris <will@tailscale.com>
The server hasn't sent it in ages.
Updates #cleanup
Change-Id: I9695ab0f074ec6fb006e11faf3cdfc5ca049fbf8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
ScrubbedGoroutineDump previously only returned the stacks of all
goroutines. I also want to be able to use this for only the current
goroutine's stack. Add a bool param to support both ways.
Updates tailscale/corp#5149
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a `Tailscale-Headers-Info` header whenever the `Tailscale-User-`
headers are filled from the HTTP proxy handler.
Planning on hooking this shorturl up to KB docs about the header
values (i.e. what's a login name vs. display name) and security
considerations to keep in mind while using these headers - notibly
that they can also be filled from external requests that do not hit
tailscaled.
Updates https://github.com/tailscale/tailscale/issues/6954
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Trying to SSH when SELinux is enforced results in errors like:
```
➜ ~ ssh ec2-user@<ip>
Last login: Thu Jun 1 22:51:44 from <ip2>
ec2-user: no shell: Permission denied
Connection to <ip> closed.
```
while the `/var/log/audit/audit.log` has
```
type=AVC msg=audit(1685661291.067:465): avc: denied { transition } for pid=5296 comm="login" path="/usr/bin/bash" dev="nvme0n1p1" ino=2564 scontext=system_u:system_r:unconfined_service_t:s0 tcontext=unconfined_u:unconfined_r:unconfined_t:s0 tclass=process permissive=0
```
The right fix here would be to somehow install the appropriate context when
tailscale is installed on host, but until we figure out a way to do that
stop using the `login` cmd in these situations.
Updates #4908
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Adds two new headers to HTTP serve proxy:
- `Tailscale-User-Login`: Filled with requester's login name.
- `Tailscale-User-Name`: Filled with requester's display name.
These headers only get filled when the SrcAddr is associated with
a non-tagged (i.e. user-owned) node within the client's Tailnet.
The headers are passed through empty when the request originated
from another tailnet, or the public internet (via funnel).
Updates https://github.com/tailscale/tailscale/issues/6954
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
* tka: provide verify-deeplink local API endpoint
Fixes https://github.com/tailscale/tailscale/issues/8302
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
Address code review comments
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
Address code review comments by Ross
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
* Improve error encoding, fix logic error
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
---------
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
The netstack code had a bunch of logic to figure out if the LocalBackend should handle an
incoming connection and then would call the function directly on LocalBackend. Move that
logic to LocalBackend and refactor the methods to return conn handlers.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is a follow up on PR #8172 that adds a synchronous Poll method
which allows for the Poller to be used as a zero value without needing
the constructor. The local backend is also changed to use the new API.
A follow up PR will remove the async functionality from the portlist package.
Updates #8171
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Instead of renewing certificates based on whether or not they're expired
at a fixed 14-day period in the future, renew based on whether or not
we're more than 2/3 of the way through the certificate's lifetime. This
properly handles shorter-lived certificates without issue.
Updates #8204
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I5e82a9cadc427c010d04ce58c7f932e80dd571ea
This change introduces a NodeKey func on localbackend that returns the
public node key.
Updates tailscale/corp#9967
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
It was supposed to be best effort but in some cases (macsys at least,
per @marwan-at-work) it hangs and exhausts the whole context.Context
deadline so we fail to make the SetDNS call to the server.
Updates #8067
Updates #3273 etc
Change-Id: Ie1f04abe9689951484748aecdeae312afbafdb0f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fix does not seem ideal, but the test infrastructure using a local
goos doesn't seem to avoid all of the associated challenges, but is
somewhat deeply tied to the setup.
The core issue this addresses for now is that when run on Windows there
can be no code paths that attempt to use an invalid UID string, which on
Windows is described in [1].
For the goos="linux" tests, we now explicitly skip the affected
migration code if runtime.GOOS=="windows", and for the Windows test we
explicitly use the running users uid, rather than just the string
"user1". We also now make the case where a profile exists and has
already been migrated a non-error condition toward the outer API.
Updates #7876
[1] https://learn.microsoft.com/en-us/windows-server/identity/ad-ds/manage/understand-security-identifiers
Signed-off-by: James Tucker <jftucker@gmail.com>
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c
Without this, the peer fails to do anything over the PeerAPI if it
has a masquerade address.
```
Apr 19 13:58:15 hydrogen tailscaled[6696]: peerapi: invalid request from <ip>:58334: 100.64.0.1/32 not found in self addresses
```
Updates #8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Exposes some internal state of the sockstats package via the C2N and
PeerAPI endpoints, so that it can be used for debugging. For now this
includes the estimated radio on percentage and a second-by-second view
of the times the radio was active.
Also fixes another off-by-one error in the radio on percentage that
was leading to >100% values (if n seconds have passed since we started
to monitor, there may be n + 1 possible seconds where the radio could
have been on).
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This adds an initial and intentionally minimal configuration for
golang-ci, fixes the issues reported, and adds a GitHub Action to check
new pull requests against this linter configuration.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163
Redoes the approach from #5550 and #7539 to explicitly pass in the logf
function, instead of having global state that can be overridden.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We accidentally switched to ./tool/go in
4022796484 which resulted in no longer
running Windows builds, as this is attempting to run a bash script.
I was unable to quickly fix the various tests that have regressed, so
instead I've added skips referencing #7876, which we need to back and
fix.
Updates #7262
Updates #7876
Signed-off-by: James Tucker <james@tailscale.com>
Otherwise there may be a panic if it's nil (and the control side of
the c2n call will just time out).
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Makes it more apparent in the PeerAPI endpoint that the client was
not built with the appropriate toolchain or build tags.
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This makes the sockstat logger available on all builds, but only enables
it by default for unstable. For stable builds, the logger must be
explicitly enabled via C2N component logger.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Will Norris <will@tailscale.com>
I realized that a lot of the problems that we're seeing around migration and
LocalBackend state can be avoided if we drive Windows pref migration entirely
from within tailscaled. By doing it this way, tailscaled can automatically
perform the migration as soon as the connection with the client frontend is
established.
Since tailscaled is already running as LocalSystem, it already has access to
the user's local AppData directory. The profile manager already knows which
user is connected, so we simply need to resolve the user's prefs file and read
it from there.
Of course, to properly migrate this information we need to also check system
policies. I moved a bunch of policy resolution code out of the GUI and into
a new package in util/winutil/policy.
Updates #7626
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
For stores like k8s secrets we need to dial out to the k8s API as though Tailscale
wasn't running. The issue currently only manifests when you try to use an exit node
while running inside a k8s cluster and are trying to use Kubernetes secrets as the
backing store.
This doesn't address cmd/containerboot, which I'll do in a follow up.
Updates #7695
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Since users can run tailscaled in a variety of ways (root, non-root,
non-root with process capabilities on Linux), this check will print the
current process permissions to the log to aid in debugging.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ida93a206123f98271a0c664775d0baba98b330c7
The reverse proxy was sending the ingressd IPv6 down as the
X-Forwarded-For. This update uses the actual remote addr.
Updates tailscale/corp#9914
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
This change trims the mountPoint from the request URL path before
sending the request to the reverse proxy.
Today if you mount a proxy at `/foo` and request to
`/foo/bar/baz`, we leak the `mountPoint` `/foo` as part of the request
URL's path.
This fix makes removed the `mountPoint` prefix from the path so
proxied services receive requests as if they were running at the root
(`/`) path.
This could be an issue if the app generates URLs (in HTML or otherwise)
and assumes `/path`. In this case, those URLs will 404.
With that, I still think we should trim by default and not leak the
`mountPoint` (specific to Tailscale) into whatever app is hosted.
If it causes an issue with URL generation, I'd suggest looking at configuring
an app-specific path prefix or running Caddy as a more advanced
solution.
Fixes: #6571
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
We were checking against the wrong directory, instead if we
have a custom store configured just use that.
Fixes#7588Fixes#7665
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We were not storing the ACME keys in the state store, they would always
be stored on disk.
Updates #7588
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change focuses on the backend log ID, which is the mostly commonly
used in the client. Tests which don't seem to make use of the log ID
just use the zero value.
Signed-off-by: Will Norris <will@tailscale.com>
Switch to using logtail for logging sockstat logs. Always log locally
(on supported platforms), but disable automatic uploading. Change
existing c2n sockstats request to trigger upload to log server and
return log ID.
Signed-off-by: Will Norris <will@tailscale.com>
They're not needed for the sockstats logger, and they're somewhat
expensive to return (since they involve the creation of a map per
label). We now have a separate GetInterfaces() method that returns
them instead (which we can still use in the PeerAPI debug endpoint).
If changing sockstatlog to sample at 10,000 Hz (instead of the default
of 10Hz), the CPU usage would go up to 59% on a iPhone XS. Removing the
per-interface stats drops it to 20% (a no-op implementation of Get that
returns a fixed value is 16%).
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Followup to #7499 to make validation a separate function (
GetWithValidation vs. Get). This way callers that don't need it don't
pay the cost of a syscall per active TCP socket.
Also clears the conn on close, so that we don't double-count the stats.
Also more consistently uses Go doc comments for the exported API of the
sockstats package.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Previously the part that handled Funnel connections was not
aware of any listeners that tsnet.Servers might have had open
so it would check against the ServeConfig and fail.
Adding a ServeConfig for a TCP proxy was also not suitable in this
scenario as that would mean creating two different listeners and have
one forward to the other, which really meant that you could not have
funnel and tailnet-only listeners on the same port.
This also introduces the ipn.FunnelConn as a way for users to identify
whether the call is coming over funnel or not. Currently it only holds
the underlying conn and the target as presented in the "Tailscale-Ingress-Target"
header.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We can use the TCP_CONNECTION_INFO getsockopt() on Darwin to get
OS-collected tx/rx bytes for TCP sockets. Since this API is not available
for UDP sockets (or on Linux/Android), we can't rely on it for actual
stats gathering.
However, we can use it to validate the stats that we collect ourselves
using read/write hooks, so that we can be more confident in them. We
do need additional hooks from the Go standard library (added in
tailscale/go#59) to be able to collect them.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This change adds a ringbuffer to each magicsock endpoint that keeps a
fixed set of "changes"–debug information about what updates have been
made to that endpoint.
Additionally, this adds a LocalAPI endpoint and associated
"debug peer-status" CLI subcommand to fetch the set of changes for a given
IP or hostname.
Updates tailscale/corp#9364
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I34f726a71bddd0dfa36ec05ebafffb24f6e0516a
Makes it cheaper/simpler to persist values, and encourages reuse of
labels as opposed to generating an arbitrary number.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This prevents a panic where we synthesize a new netmap in
setClientStatus after we've shut down and nil'd out the controlclient,
since that function expects to be called while connected to control.
Fixes#7392
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib631eb90f34f6afa008d69bbb386f70da145e102
Uses the hooks added by tailscale/go#45 to instrument the reads and
writes on the major code paths that do network I/O in the client. The
convention is to use "<package>.<type>:<label>" as the annotation for
the responsible code path.
Enabled on iOS, macOS and Android only, since mobile platforms are the
ones we're most interested in, and we are less sensitive to any
throughput degradation due to the per-I/O callback overhead (macOS is
also enabled for ease of testing during development).
For now just exposed as counters on a /v0/sockstats PeerAPI endpoint.
We also keep track of the current interface so that we can break out
the stats by interface.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The log ID types were moved to a separate package so that
code that only depend on log ID types do not need to link
in the logic for the logtail client itself.
Not all code need the logtail client.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Exposes the delegated interface data added by #7248 in the debug
endpoint. I would have found it useful when working on that PR, and
it may be handy in the future as well.
Also makes the interfaces table slightly easier to parse by adding
borders to it. To make then nicer-looking, the CSP was relaxed to allow
inline styles.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
With #6566 we added an external mechanism for getting the default
interface, and used it on macOS and iOS (see tailscale/corp#8201).
The goal was to be able to get the default physical interface even when
using an exit node (in which case the routing table would say that the
Tailscale utun* interface is the default).
However, the external mechanism turns out to be unreliable in some
cases, e.g. when multiple cellular interfaces are present/toggled (I
have occasionally gotten my phone into a state where it reports the pdp_ip1
interface as the default, even though it can't actually route traffic).
It was observed that `ifconfig -v` on macOS reports an "effective interface"
for the Tailscale utn* interface, which seems promising. By examining
the ifconfig source code, it turns out that this is done via a
SIOCGIFDELEGATE ioctl syscall. Though this is a private API, it appears
to have been around for a long time (e.g. it's in the 10.13 xnu release
at https://opensource.apple.com/source/xnu/xnu-4570.41.2/bsd/net/if_types.h.auto.html)
and thus is unlikely to go away.
We can thus use this ioctl if the routing table says that a utun*
interface is the default, and go back to the simpler mechanism that
we had before #6566.
Updates #7184
Updates #7188
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Followup to #7235, we were not treating the formatting arguments as
variadic. This worked OK for single values, but stopped working when
we started passing multiple values (noticed while trying out #7244).
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Useful when debugging issues (e.g. to see the full routing table), and
easier to refer to the output via a browser than trying to read it from
the logs generated by `bugreport --diagnose`.
Behind a canDebug() check, similar to the /magicsock and /interfaces
endpoints.
Updates #7184
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
With #6566 we started to more aggressively bind to the default interface
on Darwin. We are seeing some reports of the wrong cellular interface
being chosen on iOS. To help with the investigation, this adds to knobs
to control the behavior changes:
- CapabilityDebugDisableAlternateDefaultRouteInterface disables the
alternate function that we use to get the default interface on macOS
and iOS (implemented in tailscale/corp#8201). We still log what it
would have returned so we can see if it gets things wrong.
- CapabilityDebugDisableBindConnToInterface is a bigger hammer that
disables binding of connections to the default interface altogether.
Updates #7184
Updates #7188
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The profileManager was using the LoginName as a proxy to figure out if the profile
had logged in, however the LoginName is not present if the node was created with an
Auth Key that does not have an associated user.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We now handle the case where the NetworkMap.SelfNode has already expired
and do not return an expiry time in the past (which causes an ~infinite
loop of timers to fire).
Additionally, we now add an explicit check to ensure that the next
expiry time is never before the current local-to-the-system time, to
ensure that we don't end up in a similar situation due to clock skew.
Finally, we add more tests for this logic to ensure that we don't
regress on these edge cases.
Fixes#7193
Change-Id: Iaf8e3d83be1d133a7aab7f8d62939e508cc53f9c
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
If the user passes the --diagnose flag, print a warning if any of the
default or fallback DNS resolvers are Tailscale IPs. This can interfere
with the ability to connect to the controlplane, and is typically
something to pay attention to if there's a connectivity issue.
Change-Id: Ib14bf6228c037877fbdcd22b069212b1a4b2c456
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
We can log too quickly for logtail to catch up, even when we opt out of
log rate-limiting. When the user passes the --diagnose flag to
bugreport, we use a token bucket to control how many logs per second are
printed and sleep until we're able to write more.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If27672d66b621b589280bd0fe228de367ffcbd8f
The iOS has a command to reset the persisted state of the app, but it
was doing its own direct keychain manipulation. This proved to be
brittle (since we changed how preferences are stored with #6022), so
we instead add a LocalAPI endpoint to do do this, which can be updated
in tandem.
This clears the same state as the iOS implementation (tailscale/corp#3186),
that is the machine key and preferences (which includes the node key).
Notably this does not clear the logtail ID, so that logs from the device
still end up in the same place.
Updates tailscale/corp#8923
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
When turned on via environment variable (off by default), this will use
the BSD routing APIs to query what interface index a socket should be
bound to, rather than binding to the default interface in all cases.
Updates #5719
Updates #5940
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib4c919471f377b7a08cd3413f8e8caacb29fee0b
This allows users to temporarily enable/disable dnscache logging via a
new node capability, to aid in debugging strange connectivity issues.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I46cf2596a8ae4c1913880a78d0033f8b668edc08
The current node isn't in NetMap.Peers, so without this we would not
have fired this timer on self expiry.
Updates #6932
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Id57f96985397e372f9226802d63b42ff92c95093
On macOS (AppStore and macsys), we need to bind to ""/all-interfaces
due to the network sandbox. Ideally we would only bind to the
Tailscale interface, but macOS errors out if we try to
to listen on privileged ports binding only to a specific
interface.
We also implement the lc.Control hook, same as we do for
peerapi. It doesn't solve our problem but it's better that
we do and would likely be required when Apple gets around to
fixing per-interface priviliged port binding.
Fixes: #6364
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
This change delays the first flush in the /watch-ipn-bus/ handler
until after the watcher has been successfully installed on the IPN
bus. It does this by adding a new onWatchAdded callback to
LocalBackend.WatchNotifications().
Without this, the endpoint returns a 200 almost immediatly, and
only then installs a watcher for IPN events. This means there's a
small window where events could be missed by clients after calling
WatchIPNBus().
Fixestailscale/corp#8594.
Signed-off-by: salman <salman@tailscale.com>
In order to be able to synthesize a new NetMap when a node expires, have
LocalBackend start a timer when receiving a new NetMap that fires
slightly after the next node expires. Additionally, move the logic that
updates expired nodes into LocalBackend so it runs on every netmap
(whether received from controlclient or self-triggered).
Updates #6932
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I833390e16ad188983eac29eb34cc7574f555f2f3
Needed for clients that get information via the /v0/status LocalAPI
endpoint (e.g. to not offer expired exit nodes as options).
Updates tailscale/corp#8702
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
UI works remains, but data is there now.
Updates #4015
Change-Id: Ib91e94718b655ad60a63596e59468f3b3b102306
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Unsigned peers should not be allowed to generate Wake-on-Lan packets,
only access Funnel.
Updates #6934
Updates #7515
Updates #6475
Signed-off-by: James Tucker <james@tailscale.com>
This makes `tailscale debug watch-ipn` safe to use for troubleshooting
user issues, in addition to local debugging during development.
Signed-off-by: David Anderson <danderson@tailscale.com>
By default, `http.Transport` keeps idle connections open hoping to re-use them in the future. Combined with a separate transport per request in HTTP proxy this results in idle connection leak.
Fixes#6773
Use multierr.Range to iterate through an error tree
instead of multiple invocations of errors.As.
This scales better as we add more Go error types to the switch.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Mainly motivated by wanting to know how much Taildrop is used, but
also useful when tracking down how many invalid requests are
generated.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Nodes which have both -advertise-exit-node and -exit-node in prefs
should continue have them until the next invocation of `tailscale up`.
Updates #3569.
Signed-off-by: salman <salman@tailscale.com>
* Do not print the status at the end of a successful operation
* Ensure the key of the current node is actually trusted to make these changes
Signed-off-by: Tom DNetto <tom@tailscale.com>
This handles the case where the inner *os.PathError is wrapped in
another error type, and additionally will redact errors of type
*os.LinkError. Finally, add tests to verify that redaction works.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie83424ff6c85cdb29fb48b641330c495107aab7c
x/exp/slices now has ContainsFunc (golang/go#53983) so we can delete
our versions.
Change-Id: I5157a403bfc1b30e243bf31c8b611da25e995078
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For testing of Windows GUI client.
Updates #6480
Change-Id: I42f7526d95723e14bed7085fb759e371b43aa9da
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To simplify clients getting the initial state when they subscribe.
Change-Id: I2490a5ab2411253717c74265a46a98012b80db82
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If user's fn returned false and never canceled their ctx, we never
stopped the NotifyWatchEngineUpdates goroutine.
This was introduced recently (this cycle).
Change-Id: I3453966ac71e00727296ddd237ef845782f4e52e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were writing the error when getting the default interface before
setting the content type, so we'd get HTML treated as plain text.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The peerapi IPv6 listener has a nil listener.
But we didn't need the listener's address anyway, so don't
try to use it.
Change-Id: I8e8a1a895046d129a3683973e732d9bed82f3b02
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, `TAILSCALE_USE_WIP_CODE` was needed to hit a bunch of the TKA paths. With
this change:
- Enablement codepaths (NetworkLockInit) and initialization codepaths (tkaBootstrapFromGenesisLocked via tkaSyncIfNeeded)
require either the WIP envknob or CapabilityTailnetLockAlpha.
- Normal operation codepaths (tkaSyncIfNeeded, tkaFilterNetmapLocked) require TKA to be initialized, or either-or the
envknob / capability.
- Auxillary commands (ie: changing tka keys) require TKA to be initialized.
The end result is that it shouldn't be possible to initialize TKA (or subsequently use any of its features) without being
sent the capability or setting the envknob on tailscaled yourself.
I've also pulled out a bunch of unnecessary checks for CanSupportNetworkLock().
Signed-off-by: Tom DNetto <tom@tailscale.com>
We merge/dedupe profiles based on UserID and NodeID, however we were not accounting for ControlURLs.
Updates #713
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The Go style weirds people out so we try to stick to the more
well-known double hyphen style in docs.
Change-Id: Iad6db5c82cda37f6b7687eed7ecd9276f8fd94d6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This reverts commit f1130421f0.
It was submitted with failing tests (go generate checks)
Requires a lot of API changes to fix so rolling back instead of
forward.
Change-Id: I024e8885c0ed44675d3028a662f386dda811f2ad
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We want users to have the freedom to start tailscaled with `-no-logs-no-support`,
but that is obviously in direct conflict with tailnets that have network logging
enabled.
When we detect that condition, we record the issue in health, notify the client,
set WantRunning=false, and bail.
We clear the item in health when a profile switch occurs, since it is a
per-tailnet condition that should not propagate across profiles.
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Only the macOS/iOS clients care about it still, so we'll move it
to their repo.
But keep a test that makes sure that LocalBackend continues to
implement it so we get an early warning sign before we break
macOS/iOS.
Change-Id: I56392b740fe55b4d28468b77124c821b5c46c22b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We use this pattern in a number of places (in this repo and elsewhere)
and I was about to add a fourth to this repo which was crossing the line.
Add this type instead so they're all the same.
Also, we have another Set type (SliceSet, which tracks its keys in
order) in another repo we can move to this package later.
Change-Id: Ibbdcdba5443fae9b6956f63990bdb9e9443cefa9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The "userID is empty everywhere but Windows" docs on lots of places
but not everywhere while using just a string type was getting
confusing. This makes a new type to wrap up those rules, however
weird/historical they might be.
Change-Id: I142e85a8e38760988d6c0c91d0efecedade81b9b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So GUI clients don't need to poll for it.
We still poll internally (for now!) but that's still cheaper. And will
get much cheaper later, without having to modify clients once they
start sending this bit.
Change-Id: I36647b701c8d1fe197677e5eb76f6894e8ff79f7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Follow-up to #6467 and #6506.
LocalBackend knows the server-mode state, so move more auth checking
there, removing some bookkeeping from ipnserver.Server.
Updates #6417
Updates tailscale/corp#8051
Change-Id: Ic5d14a077bf0dccc92a3621bd2646bab2cc5b837
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Sonia Appasamy