tailscale

Commit Graph

Author	SHA1	Message	Date
Irbe Krumina	096b090caf	cmd/containerboot,kube,util/linuxfw: configure kube egress proxies to route to 1+ tailnet targets (#13531 ) * cmd/containerboot,kube,util/linuxfw: configure kube egress proxies to route to 1+ tailnet targets This commit is first part of the work to allow running multiple replicas of the Kubernetes operator egress proxies per tailnet service + to allow exposing multiple tailnet services via each proxy replica. This expands the existing iptables/nftables-based proxy configuration mechanism. A proxy can now be configured to route to one or more tailnet targets via a (mounted) config file that, for each tailnet target, specifies: - the target's tailnet IP or FQDN - mappings of container ports to which cluster workloads will send traffic to tailnet target ports where the traffic should be forwarded. Example configfile contents: { "some-svc": {"tailnetTarget":{"fqdn":"foo.tailnetxyz.ts.net","ports"{"tcp:4006:80":{"protocol":"tcp","matchPort":4006,"targetPort":80},"tcp:4007:443":{"protocol":"tcp","matchPort":4007,"targetPort":443}}}} } A proxy that is configured with this config file will configure firewall rules to route cluster traffic to the tailnet targets. It will then watch the config file for updates as well as monitor relevant netmap updates and reconfigure firewall as needed. This adds a bunch of new iptables/nftables functionality to make it easier to dynamically update the firewall rules without needing to restart the proxy Pod as well as to make it easier to debug/understand the rules: - for iptables, each portmapping is a DNAT rule with a comment pointing at the 'service',i.e: -A PREROUTING ! -i tailscale0 -p tcp -m tcp --dport 4006 -m comment --comment "some-svc:tcp:4006 -> tcp:80" -j DNAT --to-destination 100.64.1.18:80 Additionally there is a SNAT rule for each tailnet target, to mask the source address. - for nftables, a separate prerouting chain is created for each tailnet target and all the portmapping rules are placed in that chain. This makes it easier to look up rules and delete services when no longer needed. (nftables allows hooking a custom chain to a prerouting hook, so no extra work is needed to ensure that the rules in the service chains are evaluated). The next steps will be to get the Kubernetes Operator to generate the configfile and ensure it is mounted to the relevant proxy nodes. Updates tailscale/tailscale#13406 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	2 months ago
Percy Wegmann	d00d6d6dc2	go.mod: update to github.com/tailscale/netlink library that doesn't require vishvananda/netlink After the upstream PR is merged, we can point directly at github.com/vishvananda/netlink and retire github.com/tailscale/netlink. See https://github.com/vishvananda/netlink/pull/1006 Updates #12298 Signed-off-by: Percy Wegmann <percy@tailscale.com>	3 months ago
Andrew Dunham	5708fc0639	wgengine/router: print Docker warning when stateful filtering is enabled When Docker is detected on the host and stateful filtering is enabled, Docker containers may be unable to reach Tailscale nodes (depending on the network settings of a container). Detect Docker when stateful filtering is enabled and print a health warning to aid users in noticing this issue. We avoid printing the warning if the current node isn't advertising any subnet routes and isn't an exit node, since without one of those being true, the node wouldn't have the correct AllowedIPs in WireGuard to allow a Docker container to connect to another Tailscale node anyway. Updates #12070 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Idef538695f4d101b0ef6f3fb398c0eaafc3ae281	7 months ago
Andrew Lytvynov	c28f5767bf	various: implement stateful firewalling on Linux (#12025 ) Updates https://github.com/tailscale/corp/issues/19623 Change-Id: I7980e1fb736e234e66fa000d488066466c96ec85 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Co-authored-by: Andrew Dunham <andrew@du.nham.ca>	7 months ago
Brad Fitzpatrick	745931415c	health, all: remove health.Global, finish plumbing health.Tracker Updates #11874 Updates #4136 Change-Id: I414470f71d90be9889d44c3afd53956d9f26cd61 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	3af0f526b8	cmd{containerboot,k8s-operator},util/linuxfw: support ExternalName Services (#11802 ) * cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name Adds support for optionally configuring containerboot to proxy traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var to containerboot. Containerboot will periodically (every 10 minutes) attempt to resolve the DNS name and ensure that all traffic sent to the node's tailnet IP gets forwarded to the resolved backend IP addresses. Currently: - if the firewall mode is iptables, traffic will be load balanced accross the backend IP addresses using round robin. There are no health checks for whether the IPs are reachable. - if the firewall mode is nftables traffic will only be forwarded to the first IP address in the list. This is to be improved. * cmd/k8s-operator: support ExternalName Services Adds support for exposing endpoints, accessible from within a cluster to the tailnet via DNS names using ExternalName Services. This can be done by annotating the ExternalName Service with tailscale.com/expose: "true" annotation. The operator will deploy a proxy configured to route tailnet traffic to the backend IPs that service.spec.externalName resolves to. The backend IPs must be reachable from the operator's namespace. Updates tailscale/tailscale#10606 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	7c1d6e35a5	all: use Go 1.22 range-over-int Updates #11058 Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	5fb721d4ad	util/linuxfw,wgengine/router: skip IPv6 firewall configuration in partial iptables mode (#11546 ) We have hosts that support IPv6, but not IPv6 firewall configuration in iptables mode. We also have hosts that have some support for IPv6 firewall configuration in iptables mode, but do not have iptables filter table. We should: - configure ip rules for all hosts that support IPv6 - only configure firewall rules in iptables mode if the host has iptables filter table. Updates tailscale/tailscale#11540 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Naman Sood	d46a4eced5	util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux (#10370 ) * util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux Updates #9084. Currently, we have to tell users to manually open UDP ports on Linux when certain firewalls (like ufw) are enabled. This change automates the process of adding and updating those firewall rules as magicsock changes what port it listens on. Signed-off-by: Naman Sood <mail@nsood.in>	12 months ago
James Tucker	215f657a5e	wgengine/router: create netfilter runner in setNetfilterMode This will enable the runner to be replaced as a configuration side effect in a later change. Updates tailscale/corp#14029 Signed-off-by: James Tucker <james@tailscale.com>	12 months ago
Maisem Ali	fbfee6a8c0	cmd/containerboot: use linuxfw.NetfilterRunner This migrates containerboot to reuse the NetfilterRunner used by tailscaled instead of manipulating iptables rule itself. This has the added advantage of now working with nftables and we can potentially drop the `iptables` command from the container image in the future. Updates #9310 Co-authored-by: Irbe Krumina <irbe@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	05a1f5bf71	util/linuxfw: move detection logic Just a refactor to consolidate the firewall detection logic in a single package so that it can be reused in a later commit by containerboot. Updates #9310 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	e8551d6b40	all: use Go 1.21 slices, maps instead of x/exp/{slices,maps} Updates #8419 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
KevinLiang10	411e3364a9	wgengine/router: use iptablesRunner when no firewall tool is available: The current router errors out when neither iptables nor nftables support is present. We should fall back to the previous behaviour which we creates a dummy iptablesRunner. Fixes: #8878 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
KevinLiang10	ae63c51ff1	wgengine/router: add auto selection heuristic for iptables/nftables This commit replaces the TS_DEBUG_USE_NETLINK_NFTABLES envknob with a TS_DEBUG_FIREWALL_MODE that should be set to either 'iptables' or 'nftables' to select firewall mode manually, other wise tailscaled will automatically choose between iptables and nftables depending on environment and system availability. updates: #319 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
David Anderson	52212f4323	all: update exp/slices and fix call sites slices.SortFunc suffered a late-in-cycle API breakage. Updates #cleanup Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
KevinLiang10	a3c7b21cd1	util/linuxfw: add nftables support This commit adds nftable rule injection for tailscaled. If tailscaled is started with envknob TS_DEBUG_USE_NETLINK_NFTABLES = true, the router will use nftables to manage firewall rules. Updates: #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
KevinLiang10	243ce6ccc1	util/linuxfw: decoupling IPTables logic from linux router This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner. For #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
Mihai Parparita	4722f7e322	all: move network monitoring from wgengine/monitor to net/netmon We're using it in more and more places, and it's not really specific to our use of Wireguard (and does more just link/interface monitoring). Also removes the separate interface we had for it in sockstats -- it's a small enough package (we already pull in all of its dependencies via other paths) that it's not worth the extra complexity. Updates #7621 Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Jordan Whited	ea5ee6f87c	all: update golang.zx2c4.com/wireguard to github.com/tailscale/wireguard-go (#6692 ) This is temporary while we work to upstream performance work in https://github.com/WireGuard/wireguard-go/pull/64. A replace directive is less ideal as it breaks dependent code without duplication of the directive. Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Andrew Dunham	b63094431b	wgengine/router: fix tests on systems with older Busybox 'ip' binary Adjust the expected system output by removing the unsupported mask component including and after the slash in expected output like: fwmask 0xabc/0xdef This package's tests now pass in an Alpine container when the 'go' and 'iptables' packages are installed (and run as privileged so /dev/net/tun exists). Fixes #5928 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Id1a3896282bfa36b64afaec7a47205e63ad88542	2 years ago
Maisem Ali	74637f2c15	wgengine/router: [linux] add before deleting interface addrs Deleting may temporarily result in no addrs on the interface, which results in all other rules (like routes) to get dropped by the OS. I verified this fixes the problem. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Tom DNetto	f6da2220d3	wgengine: set fwmark masks in netfilter & ip rules This change masks the bitspace used when setting and querying the fwmark on packets. This allows tailscaled to play nicer with other networking software on the host, assuming the other networking software is also using fwmarks & a different mask. IPTables / mark module has always supported masks, so this is safe on the netfilter front. However, busybox only gained support for parsing + setting masks in 1.33.0, so we make sure we arent such a version before we add the "/<mask>" syntax to an ip rule command. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	e8db43e8fa	wgengine/router: demote TestDebugListRules fail to skip Updates #3360 Change-Id: Ic5c98ea03f3171c13ab9293a0ae74d17fd04d149 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	946dfec98a	wgengine/router: fix checkIPRuleSupportsV6 to actually use IPv6 Updates #3358 (should fix it) Updates #391 Change-Id: Ia62437dfa81247b0b5994d554cf279c3d540e4e7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	408b0923a6	wgengine/router: remove last non-test "ip" command usage on Linux Updates #391 Change-Id: Ic2c3f8460b1e4b8d34b936a1725705fcc1effbae Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ff1954cfd9	wgengine/router: use netlink for ip rules on Linux Using temporary netlink fork in github.com/tailscale/netlink until we get the necessary changes upstream in either vishvananda/netlink or jsimonetti/rtnetlink. Updates #391 Change-Id: I6e1de96cf0750ccba53dabff670aca0c56dffb7c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d36c0d3566	wgengine/router: add debug test to enumerate rules No non-test changes. Updates #391 Change-Id: Ia88610c08e07a119d002e58250463cb4659b9f54 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	dc2fbf5877	wgengine/router: start using netlink instead of 'ip' on Linux Converts up, down, add/del addresses, add/del routes. Not yet done: rules. Updates #391 Change-Id: I02554ca07046d18f838e04a626ba99bbd35266fb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	4c68b7df7c	tstest: add MemLogger bytes.Buffer wrapper with Logf method We use it tons of places. Updated three at least in this PR. Another use in next commit. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ed8587f90d	wgengine/router: take a link monitor Prep for #1591 which will need to make Linux's router react to changes that the link monitor observes. The router package already depended on the monitor package transitively. Now it's explicit. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	1ece91cede	go.mod: upgrade wireguard-windows, de-fork wireguard-go Pull in the latest version of wireguard-windows. Switch to upstream wireguard-go. This requires reverting all of our import paths. Unfortunately, this has to happen at the same time. The wireguard-go change is very low risk, as that commit matches our fork almost exactly. (The only changes are import paths, CI files, and a go.mod entry.) So if there are issues as a result of this commit, the first place to look is wireguard-windows changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Maisem Ali	590792915a	wgengine/router{win}: ignore broadcast routes added by Windows when removing routes. Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Maisem Ali	1b9d8771dc	ipn/ipnlocal,wgengine/router,cmd/tailscale: add flag to allow local lan access when routing traffic via an exit node. For #1527 Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
David Anderson	0a84aaca0a	wgengine/router: remove unused wireguard *Device argument. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	2d96215d97	wgengine/router: make Linux delRoute idempotent, cidrDiff fail late as possible This makes cidrDiff do as much as possible before failing, and makes a delete of an already-deleted rule be a no-op. We should never do this ourselves, but other things on the system can, and this should help us recover a bit. Also adds the start of root-requiring tests. TODO: hook into wgengine/monitor and notice when routes are changed behind our back, and invalidate our routes map and re-read from kernel (via the ip command) at least on the next reconfig call. Updates tailscale/corp#1338 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	d76334d2f0	ipn: split LocalBackend off into new ipn/ipnlocal package And move a couple other types down into leafier packages. Now cmd/tailscale doesn't bring in netlink, magicsock, wgengine, etc. Fixes #1181 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	c493e5804f	wgengine/router: make v6-ness configurable in test, for consistent results. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	0d80904fc2	wgengine/router: set up basic IPv6 routing/firewalling. Part of #19. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	189d86cce5	wgengine/router: don't use 88 or 8888 as table/rule numbers. We originally picked those numbers somewhat at random, but with the idea that 8 is a traditionally lucky number in Chinese culture. Unfortunately, "88" is also neo-nazi shorthand language. Use 52 instead, because those are the digits above the letters "TS" (tailscale) on a qwerty keyboard, so we're unlikely to collide with other users. 5, 2 and 52 are also pleasantly culturally meaningless. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	972a42cb33	wgengine/router: fix router_test to match the new marks. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	08a38f21c9	wgengine/router: don't filter subnet routing in netfilter. We have a filter in tailscaled itself now, which is more robust against weird network topologies (such as the one Docker creates). Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Avery Pennarun	a496cdc943	router_linux: remove need for iptables.ListChains(). Instead of retrieving the list of chains, or the list of rules in a chain, just try deleting the ones we don't want and then adding the ones we do want. An error in flushing/deleting still means the rule doesn't exist anymore, so there was no need to check for it first. This avoids the need to parse iptables output, which avoids the need to ever call iptables -S, which fixes #403, among other things. It's also much more future proof in case the iptables command line changes. Unfortunately the iptables go module doesn't properly pass the iptables command exit code back up when doing .Delete(), so we can't correctly check the exit code there. (exit code 1 really means the rule didn't exist, rather than some other weird problem). Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	34c30eaea0	router_linux: use only baseline 'ip rule' features that exist in old kernels. This removes the use of suppress_ifgroup and fwmark "x/y" notation, which are, among other things, not available in busybox and centos6. We also use the return codes from the 'ip' program instead of trying to parse its output. I also had to remove the previous hack that routed all of 100.64.0.0/10 by default, because that would add the /10 route into the 'main' route table instead of the new table 88, which is no good. It was a terrible hack anyway; if we wanted to capture that route, we should have captured it explicitly as a subnet route, not as part of the addr. Note however that this change affects all platforms, so hopefully there won't be any surprises elsewhere. Fixes #405 Updates #320, #144 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
David Anderson	9c914dc7dd	wgengine/router: stop using -m comment. The comment module is compiled out on several embedded systems (and also gentoo, because netfilter can't go brrrr with comments holding it back). Attempting to use comments results in a confusing error, and a non-functional firewall. Additionally, make the legacy rule cleanup non-fatal, because we do have to probe for the existence of these -m comment rules, and doing so will error out on these systems. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	0fe262f093	ipn: plumb NetfilterMode all the way out to the CLI. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	c67c8913c3	wgengine/router: add a test for linux router state transitions. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago

50 Commits (6f694da91286ba5b86912d7237f57cd3216739bb)