Over time all taildrop functionality will be contained in the
taildrop package. This will include end to end unit tests. This is
simply the first smallest piece to move over.
There is no functionality change in this commit.
Updates tailscale/corp#14772
Signed-off-by: Rhea Ghosh <rhea@tailscale.com>
Co-authored-by: Joseph Tsai <joetsai@tailscale.com>
Instead of just falling back to making a TCP query to an upstream DNS
server when the UDP query returns a truncated query, also start a TCP
query in parallel with the UDP query after a given race timeout. This
ensures that if the upstream DNS server does not reply over UDP (or if
the response packet is blocked, or there's an error), we can still make
queries if the server replies to TCP queries.
This also adds a new package, util/race, to contain the logic required for
racing two different functions and returning the first non-error answer.
Updates tailscale/corp#14809
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4311702016c1093b1beaa31b135da1def6d86316
Make the 'tailscale debug component-logs' command print the component names for
which extra logging can be turned on, for easier discoverability of debug
functions.
Updates #cleanup
Co-authored-by: Paul Scott <paul@tailscale.com>
Signed-off-by: Val <valerie@tailscale.com>
Implements the ability for the address-rewriting code to support rewriting IPv6 addresses.
Specifically, UpdateSrcAddr & UpdateDstAddr.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates https://github.com/tailscale/corp/issues/11202
We had a misstep with the semantics when applying an optimization that
showed up in the roll into corp. This test ensures that case and related
cases must be retained.
Updates #9410
Updates #9601
Signed-off-by: James Tucker <james@tailscale.com>
This reverts commit ee90cd02fd.
The outcome is not identical for empty slices. Cloner really needs
tests!
Updates #9601
Signed-off-by: James Tucker <james@tailscale.com>
go-billy is held back at v5.4.1 in order to avoid a newly introduced
subdependency that is not compatible with plan9.
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
1.50.0 switched containerboot from using `tailscale up`
to `tailscale login`. A side-effect is that a re-usable
authkey is now re-applied on every boot by `tailscale login`,
where `tailscale up` would ignore an authkey if already
authenticated.
Though this looks like it is changing the default, in reality
it is setting the default to match what 1.48 and all
prior releases actually implemented.
Fixes https://github.com/tailscale/tailscale/issues/9539
Fixes https://github.com/tailscale/corp/issues/14953
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
These were missed when adding NodeCapMap and resulted
in tsnet binaries not being able to turn on funnel.
Fixes#9566
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Ensure that when there is an event on a Tailscale managed Ingress or Service child resource, the right parent type gets reconciled
Updates tailscale/tailscale#502
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This PR ensures zombie foregrounds are shutdown if a new
ServeConfig is created that wipes the ongoing foreground ones.
For example, "tailscale serve|funnel reset|off" should close
all open sessions.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
For loading testing & profiling the cost of full netmap updates.
Updates #1909
Change-Id: I0afdf5de9967f8d95c7f81d5b531ed1c92c3208f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Update github.com/go-json-experiment/json to the latest version
and fix the build in light of some breaking API changes.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The test was sending SIGKILL to containerboot, which results in no
signal propagation down to the bash script that is running as a child
process, thus it leaks.
Minor changes to the test daemon script, so that it cleans up the socket
that it creates on exit, and spawns fewer processes.
Fixestailscale/corp#14833
Signed-off-by: James Tucker <james@tailscale.com>
In typical k8s setups, the MTU configured on the eth0 interfaces is typically 1500 which
results in packets being dropped when they make it to proxy pods as the tailscale0 interface
has a 1280 MTU.
As the primary use of this functionality is TCP, add iptables based MSS clamping to allow
connectivity.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was tailscale.com/ts-tailnet-target-ip, which was pretty
redundant. Change it to tailscale.com/tailnet-ip.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Like PeerCapMap, add a field to `tailcfg.Node` which provides
a map of Capability to raw JSON messages which are deferred to be
parsed later by the application code which cares about the specific
capabilities. This effectively allows us to prototype new behavior
without having to commit to a schema in tailcfg, and it also opens up
the possibilities to develop custom behavior in tsnet applications w/o
having to plumb through application specific data in the MapResponse.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a new RawMessage type backed by string instead of the
json.RawMessage which is backed by []byte. The byte slice makes
the generated views be a lot more defensive than the need to be
which we can get around by using a string instead.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR fixes a bug to make sure that we don't allow two configs
exist with duplicate ports
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
The kube-apiserver proxy in the operator would only run in
auth proxy mode but thats not always desirable. There are
situations where the proxy should just be a transparent
proxy and not inject auth headers, so do that using a new
env var APISERVER_PROXY and deprecate the AUTH_PROXY env.
THe new env var has three options `false`, `true` and `noauth`.
Updates #8317
Signed-off-by: Maisem Ali <maisem@tailscale.com>
tailcfg.Node zero-value clone equality checks failed when I added a
[]*foo to the structure, as the zero value and it's clone contained a
different slice header.
Updates #9377
Updates #9408
Signed-off-by: James Tucker <james@tailscale.com>
This PR adds validations for the new new funnel/serve
commands under the following rules:
1. There is always a single config for one port (bg or fg).
2. Foreground configs under the same port cannot co-exists (for now).
3. Background configs can change as long as the serve type is the same.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR uses the etag/if-match pattern to ensure multiple calls
to SetServeConfig are synchronized. It currently errors out and
asks the user to retry but we can add occ retries as a follow up.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
It became required as of 6e967446e4
Updates #8052
Change-Id: I08d100534254865293c1beca5beff8e529e4e9ac
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
General cleanup and additional test coverage of WIP code.
* use enum for serveType
* combine instances of ServeConfig access within unset
* cleanMountPoint rewritten into cleanURLPath as it only handles URL paths
* refactor and test expandProxyTargetDev
> **Note**
> Behind the `TAILSCALE_USE_WIP_CODE` flag
updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
I missed this in 343c0f1031 and I guess we don't have integration
tests for wasm. But it compiled! :)
Updates #fixup to a #cleanup
Change-Id: If147b90bab254d144ec851a392e8db10ab97f98e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It had exactly one user: netstack. Just have LocalBackend notify
netstack when here's a new netmap instead, simplifying the bloated
Engine interface that has grown a bunch of non-Engine-y things.
(plenty of rando stuff remains after this, but it's a start)
Updates #cleanup
Change-Id: I45e10ab48119e962fc4967a95167656e35b141d8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I missed connecting some controlknobs.Knobs pieces in 4e91cf20a8
resulting in that breaking control knobs entirely.
Whoops.
The fix in ipn/ipnlocal (where it makes a new controlclient) but to
atone, I also added integration tests. Those integration tests use
a new "tailscale debug control-knobs" which by itself might be useful
for future debugging.
Updates #9351
Change-Id: Id9c89c8637746d879d5da67b9ac4e0d2367a3f0d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously two tsnet nodes in the same process couldn't have disjoint
sets of controlknob settings from control as both would overwrite each
other's global variables.
This plumbs a new controlknobs.Knobs type around everywhere and hangs
the knobs sent by control on that instead.
Updates #9351
Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Sometimes `go test` would exit and close its stdout before we started reading
it, and we would return that "file closed" error then forget to os.Exit(1).
Fixed to prefer the go test subprocess error and exit regardless of the type of
error.
Fixes#9334
Signed-off-by: Paul Scott <paul@tailscale.com>
If the user's running "go test" by hand, no need to spam stderr with
the sentinel marker. It already calls t.Logf (which only gets output
on actual failure, or verbose mode) which is enough to tell users it's
known flaky. Stderr OTOH always prints out and is distracting to
manual "go test" users.
Updates #cleanup
Change-Id: Ie5e6881bae291787c30f75924fa132f4a28abbb2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All platforms use it at this point, including iOS which was the
original hold out for memory reasons. No more reason to make it
optional.
Updates #9332
Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR ensures calls to the LocalBackend are not happening
multiples times and ensures the set/unset methods are
only manipulating the serve config
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Cache the last `ClientVersion` value that was received from coordination
server and pass it in the localapi `/status` response.
When running `tailscale status`, print a message if `RunningAsLatest` is
`false`.
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Previously, foreground mode only worked in the simple case of `tailscale funnel <port>`.
This PR ensures that whatever you can do in the background can also be
done in the foreground such as setting mount paths or tcp forwarding.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
> **Note**
> Behind the `TAILSCALE_FUNNEL_DEV` flag
* Expose additional listeners through flags
* Add a --bg flag to run in the background
* --set-path to set a path for a specific target (assumes running in background)
See the parent issue for more context.
Updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
This PR adds a new field to the serve config that can be used to identify which serves are in "foreground mode" and then can also be used to ensure they do not get persisted to disk so that if Tailscaled gets ungracefully shutdown, the reloaded ServeConfig will not have those ports opened.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR removes the per request logging to the CLI as the CLI
will not be displaying those logs initially.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR adds a SessionID field to the ipn.Notify struct so that
ipn buses can identify a session and register deferred clean up
code in the future. The first use case this is for is to be able to
tie foreground serve configs to a specific watch session and ensure
its clean up when a connection is closed.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
We use it a number of places in different repos. Might as well make
one. Another use is coming.
Updates #cleanup
Change-Id: Ib7ce38de0db35af998171edee81ca875102349a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Our BETA serve help text is long and often hides the actual error
in the user's usage. Instead of printing the full text, prompt
users to use `serve --help` if they want the help info.
Fixes#14274
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
It would just fail the entire pkg, but would not print any
logs. It was already tracking all the logs, so have it emit
them when the pkg fails/times out.
Updates #9231
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We already had a path on the web client server struct, but hadn't
plumbed it through to the CLI. Add that now and use it for Synology and
QNAP instead of hard-coding the path. (Adding flag for QNAP is
tailscale/tailscale-qpkg#112) This will allow supporting other
environments (like unraid) without additional changes to the client/web
package.
Also fix a small bug in unraid handling to only include the csrf token
on POST requests.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
The flags are hidden for now. Adding propagation to tailscaled and
persistence only. The prefs field is wrapped in a struct to allow for
future expansion (like update schedule).
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
I noticed that failed tests were leaving aroudn stray tailscaled processes
on macOS at least.
To repro, add this to tstest/integration:
func TestFailInFewSeconds(t *testing.T) {
t.Parallel()
time.Sleep(3 * time.Second)
os.Exit(1)
t.Fatal("boom")
}
Those three seconds let the other parallel tests (with all their
tailscaled child processes) start up and start running their tests,
but then we violently os.Exit(1) the test driver and all the children
were kept alive (and were spinning away, using all available CPU in
gvisor scheduler code, which is a separate scary issue)
Updates #cleanup
Change-Id: I9c891ed1a1ec639fb2afec2808c04dbb8a460e0e
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
> **Note**
> Behind the `TAILSCALE_USE_WIP_CODE` flag
In preparing for incoming CLI changes, this PR merges the code path for the `serve` and `funnel` subcommands.
See the parent issue for more context.
The following commands will run in foreground mode when using the environment flag.
```
tailscale serve localhost:3000
tailscae funnel localhost:3000
```
Replaces #9134
Updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Co-authored-by: Marwan Sulaiman <marwan@tailscale.com>
As a fallback to package managers, allow updating tailscale that was
self-installed in some way. There are some tricky bits around updating
the systemd unit (should we stick to local binary paths or to the ones
in tailscaled.service?), so leaving that out for now.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
They were entirely redundant and 1:1 with the status field
so this turns them into methods instead.
Updates #cleanup
Updates #1909
Change-Id: I7d939750749edf7dae4c97566bbeb99f2f75adbc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of confusing users, emit an event that explicitly tells the
user that HTTPS is disabled on the tailnet and that ingress may not
work until they enable it.
Updates #9141
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Port 8080 is routinely used for HTTP services, make it easier to
use --forwards=tcp/8080/... by moving the metrics port out of the
way.
Updates #1748
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Ensures that Statefulset reconciler config has only one of Cluster target IP or tailnet target IP.
Adds a test case for containerboot egress proxy mode.
Updates tailscale/tailscale#8184
Signed-off-by: irbekrm <irbekrm@gmail.com>
First part of work for the functionality that allows users to create an egress
proxy to access Tailnet services from within Kubernetes cluster workloads.
This PR allows creating an egress proxy that can access Tailscale services over HTTP only.
Updates tailscale/tailscale#8184
Signed-off-by: irbekrm <irbekrm@gmail.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
While investigating the fix in 7538f38671,
I was curious why the testwrapper didn't fail. Turns out if the test
times out and there was no explicit failure, the only message we get
is that the overall pkg failed and no failure information about the
individual test. This resulted in a 0 exit code.
This fixes that by failing the explicit case of the pkg failing when
there is nothing to retry for that pkg.
Updates #8493
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This makes wsconn.Conns somewhat present reasonably when they are
the client of an http.Request, rather than just put a placeholder
in that field.
Updates tailscale/corp#13777
Signed-off-by: David Anderson <danderson@tailscale.com>
We would call Update on the secret, but that was racey and would occasionaly
fail. Instead use patch whenever we can.
Fixes errors like
```
boot: 2023/08/29 01:03:53 failed to set serve config: sending serve config: updating config: writing ServeConfig to StateStore: Operation cannot be fulfilled on secrets "ts-webdav-kfrzv-0": the object has been modified; please apply your changes to the latest version and try again
{"level":"error","ts":"2023-08-29T01:03:48Z","msg":"Reconciler error","controller":"ingress","controllerGroup":"networking.k8s.io","controllerKind":"Ingress","Ingress":{"name":"webdav","namespace":"default"},"namespace":"default","name":"webdav","reconcileID":"96f5cfed-7782-4834-9b75-b0950fd563ed","error":"failed to provision: failed to create or get API key secret: Operation cannot be fulfilled on secrets \"ts-webdav-kfrzv-0\": the object has been modified; please apply your changes to the latest version and try again","stacktrace":"sigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).reconcileHandler\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:324\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).processNextWorkItem\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:265\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).Start.func2.2\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:226"}
```
Updates #502
Updates #7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Printing out JSON representation things in log output is pretty common.
Updates #cleanup
Change-Id: Ife2d2e321a18e6e1185efa8b699a23061ac5e5a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Reimplement `downloadURLToFile` using `distsign.Download` and move all
of the progress reporting logic over there.
Updates #6995
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This was added in 3451b89e5f, but
resulted in the v6 Tailscale address being added to status when
when the forwarding only happened on the v4 address.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The new ingress reconcile raises events on failure, but I forgot to
add the updated permission.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This uses the new react-based web client for all builds, not just with
the --dev flag.
If the web client assets have not been built, the client will serve a
message that Tailscale was built without the web client, and link to
build instructions. Because we will include the web client in all of our
builds, this should only be seen by developers or users building from
source. (And eventually this will be replaced by attempting to download
needed assets as runtime.)
We do now checkin the build/index.html file, which serves the error
message when assets are unavailable. This will also eventually be used
to trigger in CI when new assets should be built and uploaded to a
well-known location.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
This option allows logging the raw HTTP requests and responses that the
portmapper Client makes when using UPnP. This can be extremely helpful
when debugging strange UPnP issues with users' devices, and might allow
us to avoid having to instruct users to perform a packet capture.
Updates #8992
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I2c3cf6930b09717028deaff31738484cc9b008e4
On k8s the serve-config secret mount is symlinked so checking against
the Name makes us miss the events.
Updates #7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously, the operator would only monitor Services and create
a Tailscale StatefulSet which acted as a L3 proxy which proxied
traffic inbound to the Tailscale IP onto the services ClusterIP.
This extends that functionality to also monitor Ingress resources
where the `ingressClassName=tailscale` and similarly creates a
Tailscale StatefulSet, acting as a L7 proxy instead.
Users can override the desired hostname by setting:
```
- tls
hosts:
- "foo"
```
Hostnames specified under `rules` are ignored as we only create a single
host. This is emitted as an event for users to see.
Fixes#7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This watches the provided path for a JSON encoded ipn.ServeConfig.
Everytime the file changes, or the nodes FQDN changes it reapplies
the ServeConfig.
At boot time, it nils out any previous ServeConfig just like tsnet does.
As the ServeConfig requires pre-existing knowledge of the nodes FQDN to do
SNI matching, it introduces a special `${TS_CERT_DOMAIN}` value in the JSON
file which is replaced with the known CertDomain before it is applied.
Updates #502
Updates #7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously users would have to unexpose/expose the service in order to
change Hostname/TargetIP. This now applies those changes by causing a
StatefulSet rollout now that a61a9ab087 is in.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
1. Add TCP port forwarding.
For example: ./sniproxy -forwards=tcp/22/github.com
will forward SSH to github.
% ssh -i ~/.ssh/id_ecdsa.pem -T git@github.com
Hi GitHubUser! You've successfully authenticated, but GitHub does not
provide shell access.
% ssh -i ~/.ssh/id_ecdsa.pem -T git@100.65.x.y
Hi GitHubUser! You've successfully authenticated, but GitHub does not
provide shell access.
2. Additionally export clientmetrics as prometheus metrics for local
scraping over the tailnet: http://sniproxy-hostname:8080/debug/varz
Updates https://github.com/tailscale/tailscale/issues/1748
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
I'm not saying it works, but it compiles.
Updates #5794
Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a cached self node to the web client Server struct, which will
be used from the web client api to verify that request came from the
node's own machine (i.e. came from the web client frontend). We'll
be using when we switch the web client api over to acting as a proxy
to the localapi, to protect against DNS rebinding attacks.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add `dist.Signer` hook which can arbitrarily sign linux/synology
artifacts. Plumb it through in `cmd/dist` and remove existing tarball
signing key. Distsign signing will happen on a remote machine, not using
a local key.
Updates #755
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Previously we would not reapply changes to TS_HOSTNAME etc when
then the container restarted and TS_AUTH_ONCE was enabled.
This splits those into two steps login and set, allowing us to
only rerun the set step on restarts.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The Windows Security Center is a component that manages the registration of
security products on a Windows system. Only products that have obtained a
special cert from Microsoft may register themselves using the WSC API.
Practically speaking, most vendors do in fact sign up for the program as it
enhances their legitimacy.
From our perspective, this is useful because it gives us a high-signal
source of information to query for the security products installed on the
system. I've tied this query into the osdiag package and is run during
bugreports.
It uses COM bindings that were automatically generated by my prototype
metadata processor, however that program still has a few bugs, so I had
to make a few manual tweaks. I dropped those binding into an internal
package because (for the moment, at least) they are effectively
purpose-built for the osdiag use case.
We also update the wingoes dependency to pick up BSTR.
Fixes#10646
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Indicate to the web client when it is running in CGI mode, and if it is
then cache the csrf key between requests.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Can write "wasm" instead of js || wasi1p, since there's only two:
$ go tool dist list | grep wasm
js/wasm
wasip1/wasm
Plus, if GOOS=wasip2 is added later, we're already set.
Updates #5794
Change-Id: Ifcfb187c3775c17c9141bc721512dc4577ac4434
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have a fancy package for doing TLS cert validation even if the machine
doesn't have TLS certs (for LetsEncrypt only) but the CLI's netcheck command
wasn't using it.
Also, update the tlsdial's outdated package docs while here.
Updates #cleanup
Change-Id: I74b3cb645d07af4d8ae230fb39a60c809ec129ad
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR removes calls to ioutil library and replaces them
with their new locations in the io and os packages.
Fixes#9034
Updates #5210
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
I forgot to move the defer out of the func, so the tsnet.Server
immediately closed after starting.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was jumbled doing a lot of things, this breaks it up into
the svc reconciliation and the tailscale sts reconciliation.
Prep for future commit.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In order for the installer to restart the GUI correctly post-upgrade, we
need the GUI to be able to register its restart preferences.
This PR adds API support for doing so. I'm adding it to OSS so that it
is available should we need to do any such registrations on OSS binaries
in the future.
Updates https://github.com/tailscale/corp/issues/13998
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Adds ability to start Funnel in the foreground and stream incoming
connections. When foreground process is stopped, Funnel is turned
back off for the port.
Exampe usage:
```
TAILSCALE_FUNNEL_V2=on tailscale funnel 8080
```
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Adds csrf protection and hooks up an initial POST request from
the React web client.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
In b987b2ab18 (2021-01-12) when we introduced sharing we mapped
the sharer to the userid at a low layer, mostly to fix the display of
"tailscale status" and the client UIs, but also some tests.
The commit earlier today, 7dec09d169, removed the 2.5yo option
to let clients disable that automatic mapping, as clearly we were never
getting around to it.
This plumbs the Sharer UserID all the way to ipnstatus so the CLI
itself can choose to print out the Sharer's identity over the node's
original owner.
Then we stop mangling Node.User and let clients decide how they want
to render things.
To ease the migration for the Windows GUI (which currently operates on
tailcfg.Node via the NetMap from WatchIPNBus, instead of PeerStatus),
a new method Node.SharerOrUser is added to do the mapping of
Sharer-else-User.
Updates #1909
Updates tailscale/corp#1183
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Make it just a views.Slice[netip.Prefix] instead of its own named type.
Having the special case led to circular dependencies in another WIP PR
of mine.
Updates #8948
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The tailscale serve|funnel commands frequently call the LocalBackend's Status
but they never need the peers to be included. This PR changes the call to be
StatusWithoutPeers which should gain a noticeable speed improvement
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Previously we would use the Impersonate-Group header to pass through
tags to the k8s api server. However, we would do nothing for non-tagged
nodes. Now that we have a way to specify these via peerCaps respect those
and send down groups for non-tagged nodes as well.
For tagged nodes, it defaults to sending down the tags as groups to retain
legacy behavior if there are no caps set. Otherwise, the tags are omitted.
Updates #5055
Signed-off-by: Maisem Ali <maisem@tailscale.com>
If a node is flapping or otherwise generating lots of STUN endpoints, we
can end up caching a ton of useless values and sending them to peers.
Instead, let's apply a fixed per-Addr limit of endpoints that we cache,
so that we're only sending peers up to the N most recent.
Updates tailscale/corp#13890
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8079a05b44220c46da55016c0e5fc96dd2135ef8
When trying to use serve with https, send users through https cert
provisioning enablement before editing the ServeConfig.
Updates tailscale/corp#10577
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
1. Add metrics to funnel flow.
2. Stop blocking users from turning off funnels when no longer in
their node capabilities.
3. Rename LocalClient.IncrementMetric to IncrementCounter to better
callout its usage is only for counter clientmetrics.
Updates tailscale/corp#10577
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This removes the unsafe/linkname and only uses the standard library.
It's a bit slower, for now, but https://go.dev/cl/518336 should get us
back.
On darwin/arm64, without https://go.dev/cl/518336
pkg: tailscale.com/tstime/mono
│ before │ after │
│ sec/op │ sec/op vs base │
MonoNow-8 16.20n ± 0% 19.75n ± 0% +21.92% (p=0.000 n=10)
TimeNow-8 39.46n ± 0% 39.40n ± 0% -0.16% (p=0.002 n=10)
geomean 25.28n 27.89n +10.33%
And with it,
MonoNow-8 16.34n ± 1% 16.93n ± 0% +3.67% (p=0.001 n=10)
TimeNow-8 39.55n ± 15% 38.46n ± 1% -2.76% (p=0.000 n=10)
geomean 25.42n 25.52n +0.41%
Updates #8839
Updates tailscale/go#70
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Netcheck no longer performs I/O itself, instead it makes requests via
SendPacket and expects users to route reply traffic to
ReceiveSTUNPacket.
Netcheck gains a Standalone function that stands up sockets and
goroutines to implement I/O when used in a standalone fashion.
Magicsock now unconditionally routes STUN traffic to the netcheck.Client
that it hosts, and plumbs the send packet sink.
The CLI is updated to make use of the Standalone mode.
Fixes#8723
Signed-off-by: James Tucker <james@tailscale.com>
Currently just serving a "Hello world" page when running the web
cli in --dev mode.
Updates tailscale/corp#13775
Co-authored-by: Will Norris <will@tailscale.com>
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Extract the self-update logic from cmd/tailscale/cli into a standalone
package that could be used from tailscaled later.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
move the tailscale web client out of the cmd/tailscale/cli package, into
a new client/web package. The remaining cli/web.go file is still
responsible for parsing CLI flags and such, and then calls into
client/web. This will allow the web client to be hooked into from other
contexts (for example, from a tsnet server), and provide a dedicated
space to add more functionality to this client.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Refactor two shared functions used by the tailscale cli,
calcAdvertiseRoutes and licensesURL. These are used by the web client as
well as other tailscale subcommands. The web client is being moved out
of the cli package, so move these two functions to new locations.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
This adds the capability to pad disco ping message payloads to reach a
specified size. It also plumbs it through to the tailscale ping -size
flag.
Disco pings used for actual endpoint discovery do not use this yet.
Updates #311.
Signed-off-by: salman <salman@tailscale.com>
Co-authored-by: Val <valerie@tailscale.com>
Plumb a signing callback function to `unixpkgs.rpmTarget` to allow
signing RPMs. This callback is optional and RPMs will build unsigned if
not set, just as before.
Updates https://github.com/tailscale/tailscale/issues/1882
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Upgrade the nfpm package to the latest version to pick up
24a43c5ad7.
The upgrade is from v0 to v2, so there was some breakage to fix.
Generated packages should have the same contents as before.
Updates https://github.com/tailscale/tailscale/issues/1882
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* We update wingoes to pick up new version information functionality
(See pe/version.go in the https://github.com/dblohm7/wingoes repo);
* We move the existing LogSupportInfo code (including necessary syscall
stubs) out of util/winutil into a new package, util/osdiag, and implement
the public LogSupportInfo function may be implemented for other platforms
as needed;
* We add a new reason argument to LogSupportInfo and wire that into
localapi's bugreport implementation;
* We add module information to the Windows implementation of LogSupportInfo
when reason indicates a bugreport. We enumerate all loaded modules in our
process, and for each one we gather debug, authenticode signature, and
version information.
Fixes#7802
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Add optional `--upstream` flag to `tailscale version` to fetch the
latest upstream release version from `pkgs.tailscale.com`. This is
useful to diagnose `tailscale update` behavior or write other tooling.
Example output:
$ tailscale version --upstream --json
{
"majorMinorPatch": "1.47.35",
"short": "1.47.35",
"long": "1.47.35-t6afffece8",
"unstableBranch": true,
"gitCommit": "6afffece8a32509aa7a4dc2972415ec58d8316de",
"cap": 66,
"upstream": "1.45.61"
}
Fixes#8669
RELNOTE=adds "tailscale version --upstream"
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The revoke-keys command allows nodes with tailnet lock keys
to collaborate to erase the use of a compromised key, and remove trust
in it.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-1848
Previously, tailscale upgrade was doing the bare minimum for checking
authenticode signatures via `WinVerifyTrustEx`. This is fine, but we can do
better:
* WinVerifyTrustEx verifies that the binary's signature is valid, but it doesn't
determine *whose* signature is valid; tailscale upgrade should also ensure that
the binary is actually signed *by us*.
* I added the ability to check the signatures of MSI files.
* In future PRs I will be adding diagnostic logging that lists details about
every module (ie, DLL) loaded into our process. As part of that metadata, I
want to be able to extract information about who signed the binaries.
This code is modelled on some C++ I wrote for Firefox back in the day. See
https://searchfox.org/mozilla-central/rev/27e4816536c891d85d63695025f2549fd7976392/toolkit/xre/dllservices/mozglue/Authenticode.cpp
for reference.
Fixes#8284
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Count number of sessions, number of DNS queries answered
successfully and in error, and number of http->https redirects.
Updates #1748
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Pass an optional PEM-encoded ECDSA key to `cmd/dist` to sign all built
tarballs. The signature is stored next to the tarball with a `.sig`
extension.
Tested this with an `openssl`-generated key pair and verified the
resulting signature.
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change introduces a new subcommand, `exit-node`, along with a
subsubcommand of `list` and a `--filter` flag.
Exit nodes without location data will continue to be displayed when
`status` is used. Exit nodes with location data will only be displayed
behind `exit-node list`, and in status if they are the active exit node.
The `filter` flag can be used to filter exit nodes with location data by
country.
Exit nodes with Location.Priority data will have only the highest
priority option for each country and city listed. For countries with
multiple cities, a <Country> <Any> option will be displayed, indicating
the highest priority node within that country.
Updates tailscale/corp#13025
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Implement `tailscale update` on FreeBSD. This is much simpler than other
platforms because `pkg rquery` lets us get the version in their repos
without any extra parsing.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Define PeerCapabilty and PeerCapMap as the new way of sending down
inter-peer capability information.
Previously, this was unstructured and you could only send down strings
which got too limiting for certain usecases. Instead add the ability
to send down raw JSON messages that are opaque to Tailscale but provide
the applications to define them however they wish.
Also update accessors to use the new values.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Similar to Arch support, use the latest version info from the official
`apk` repo and don't offer explicit track or version switching.
Add detection for Alpine Linux in version/distro along the way.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This is the Fedora family of distros, including CentOS, RHEL and others.
Tested in `fedora:latest` and `centos:7` containers.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The util/linuxfw/iptables.go had a bunch of code that wasn't yet used
(in prep for future work) but because of its imports, ended up
initializing code deep within gvisor that panicked on init on arm64
systems not using 4KB pages.
This deletes the unused code to delete the imports and remove the
panic. We can then cherry-pick this back to the branch and restore it
later in a different way.
A new test makes sure we don't regress in the future by depending on
the panicking package in question.
Fixes#8658
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Arch version of tailscale is not maintained by us, but is generally
up-to-date with our releases. Therefore "tailscale update" is just a
thin wrapper around "pacman -Sy tailscale" with different flags.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* cmd/tailscale/cli: make `tailscale update` query `softwareupdate`
Even on macOS when Tailscale was installed via the App Store, we can check for
and even install new versions if people ask explicitly. Also, warn if App Store
AutoUpdate is not turned on.
Updates #6995
This changes the ACLTestError type to reuse the existing/identical
types from the ACL implementation, to avoid issues in the future if
the two types fall out of sync.
Updates #8645
Signed-off-by: Jenny Zhang <jz@tailscale.com>
When using a custom http port like 8080, this was resulting in a
constructed hostname of `host.tailnet.ts.net:8080.tailnet.ts.net` when
looking up the serve handler. Instead, strip off the port before adding
the MagicDNS suffix.
Also use the actual hostname in `serve status` rather than the literal
string "host".
Fixes#8635
Signed-off-by: Will Norris <will@tailscale.com>
Add a few helper functions in tsweb to add common security headers to handlers. Use those functions for all non-tailscaled-facing endpoints in derper.
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
`go test -json` outputs invalid JSON when a build fails.
Handle that case by reseting the json.Decode and continuing to read.
Updates #8493
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This allows sending logs from the "logpolicy" package (and associated
callees) to something other than the log package. The behaviour for
tailscaled remains the same, passing in log.Printf
Updates #8249
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie1d43b75fa7281933d9225bffd388462c08a5f31
When performing a fallback DNS query, run the recursive resolver in a
separate goroutine and compare the results returned by the recursive
resolver with the results we get from "regular" bootstrap DNS. This will
allow us to gather data about whether the recursive DNS resolver works
better, worse, or about the same as "regular" bootstrap DNS.
Updates #5853
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ifa0b0cc9eeb0dccd6f7a3d91675fe44b3b34bd48
Previously it would wait for all tests to run before printing anything,
instead stream the results over a channel so that they can be emitted
immediately.
Updates #8493
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously it would only print the failures without providing
more information on which package the failures from.
This commit makes it so that it prints out the package information
as well as the attempt numbers.
```
➜ tailscale.com git:(main) ✗ go run ./cmd/testwrapper ./cmd/...
ok tailscale.com/cmd/derper
ok tailscale.com/cmd/k8s-operator
ok tailscale.com/cmd/tailscale/cli
ok tailscale.com/cmd/tailscaled
=== RUN TestFlakeRun
flakytest.go:38: flakytest: issue tracking this flaky test: https://github.com/tailscale/tailscale/issues/0
flakytest_test.go:41: First run in testwrapper, failing so that test is retried. This is expected.
--- FAIL: TestFlakeRun (0.00s)
FAIL tailscale.com/cmd/testwrapper/flakytest
Attempt #2: Retrying flaky tests:
ok tailscale.com/cmd/testwrapper/flakytest
```
Updates #8493
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner.
For #391
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
Redo the testwrapper to track and only retry flaky tests instead
of retrying the entire pkg. It also fails early if a non-flaky test fails.
This also makes it so that the go test caches are used.
Fixes#7975
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In order to improve our ability to understand the state of policies and
registry settings when troubleshooting, we enumerate all values in all subkeys.
x/sys/windows does not already offer this, so we need to call RegEnumValue
directly.
For now we're just logging this during startup, however in a future PR I plan to
also trigger this code during a bugreport. I also want to log more than just
registry.
Fixes#8141
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
The client/tailscale is a stable-ish API we try not to break. Revert
the Client.CreateKey method as it was and add a new
CreateKeyWithExpiry method to do the new thing. And document the
expiry field and enforce that the time.Duration can't be between in
range greater than 0 and less than a second.
Updates #7143
Updates #8124 (reverts it, effectively)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a parameter for create key that allows a number of seconds
(less than 90) to be specified for new keys.
Fixes https://github.com/tailscale/tailscale/issues/7965
Signed-off-by: Matthew Brown <matthew@bargrove.com>
getSingleObject can return `nil, nil`, getDeviceInfo was not handling
that case which resulted in panics.
Fixes#7303
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The retry logic was pathological in the following ways:
* If we restarted the logging service, any pending uploads
would be placed in a retry-loop where it depended on backoff.Backoff,
which was too aggresive. It would retry failures within milliseconds,
taking at least 10 retries to hit a delay of 1 second.
* In the event where a logstream was rate limited,
the aggressive retry logic would severely exacerbate the problem
since each retry would also log an error message.
It is by chance that the rate of log error spam
does not happen to exceed the rate limit itself.
We modify the retry logic in the following ways:
* We now respect the "Retry-After" header sent by the logging service.
* Lacking a "Retry-After" header, we retry after a hard-coded period of
30 to 60 seconds. This avoids the thundering-herd effect when all nodes
try reconnecting to the logging service at the same time after a restart.
* We do not treat a status 400 as having been uploaded.
This is simply not the behavior of the logging service.
Updates #tailscale/corp#11213
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
I noticed cmd/{cloner,viewer} didn't support structs with embedded
fields while working on a change in another repo. This adds support.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Chenyang Gao <gps949@outlook.com>
in commit 6e96744, the tsd system type has been added.
Which will cause the daemon will crash on some OSs (Windows, darwin and so on).
The root cause is that on those OSs, handleSubnetsInNetstack() will return true and set the conf.Router with a wrapper.
Later in NewUserspaceEngine() it will do subsystem set and found that early set router mismatch to current value, then panic.
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This holds back gvisor, kubernetes, goreleaser, and esbuild, which all
had breaking API changes.
Updates #8043
Updates #7381
Updates #8042 (updates u-root which adds deps)
Change-Id: I889759bea057cd3963037d41f608c99eb7466a5b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change introduces address selection for wireguard only endpoints.
If a endpoint has not been used before, an address is randomly selected
to be used based on information we know about, such as if they are able
to use IPv4 or IPv6. When an address is initially selected, we also
initiate a new ICMP ping to the endpoints addresses to determine which
endpoint offers the best latency. This information is then used to
update which endpoint we should be using based on the best possible
route. If the latency is the same for a IPv4 and an IPv6 address, IPv6
will be used.
Updates #7826
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
DERP doesn't support HTTP/2. If an HTTP/2 proxy was placed in front of
a DERP server requests would fail because the connection would
be initialized with HTTP/2, which the DERP client doesn't support.
Signed-off-by: Kyle Carberry <kyle@carberry.com>
This change adds a v6conn to the pinger to enable sending pings to v6
addrs.
Updates #7826
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
We need to always specify tags when creating an AuthKey from an OAuth key.
Check for that, and reuse the `--advertise-tags` param.
Updates #7982
Signed-off-by: Maisem Ali <maisem@tailscale.com>
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c
This adds an initial and intentionally minimal configuration for
golang-ci, fixes the issues reported, and adds a GitHub Action to check
new pull requests against this linter configuration.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163
Redoes the approach from #5550 and #7539 to explicitly pass in the logf
function, instead of having global state that can be overridden.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This also adds a bunch of tests for this function to ensure that we're
returning the proper IP(s) in all cases.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0d9d57170dbab5f2bf07abdf78ecd17e0e635399
This splits Prometheus metric handlers exposed by tsweb into two
modules:
- `varz.Handler` exposes Prometheus metrics generated by our expvar
converter;
- `promvarz.Handler` combines our expvar-converted metrics and native
Prometheus metrics.
By default, tsweb will use the promvarz handler, however users can keep
using only the expvar converter. Specifically, `tailscaled` now uses
`varz.Handler` explicitly, which avoids a dependency on the
(heavyweight) Prometheus client.
Updates https://github.com/tailscale/corp/issues/10205
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This provides an example of using native Prometheus metrics with tsweb.
Prober library seems to be the only user of PrometheusVar, so I am
removing support for it in tsweb.
Updates https://github.com/tailscale/corp/issues/10205
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
The handler will expose built-in process and Go metrics by default,
which currently duplicate some of the expvar-proxied metrics
(`goroutines` vs `go_goroutines`, `memstats` vs `go_memstats`), but as
long as their names are different, Prometheus server will just scrape
both.
This will change /debug/varz behaviour for most tsweb binaries, but
notably not for control, which configures a `tsweb.VarzHandler`
[explicitly](a5b5d5167f/cmd/tailcontrol/tailcontrol.go (L779))
Updates https://github.com/tailscale/corp/issues/10205
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Make developing derp easier by:
1. Creating an envknob telling clients to use HTTP to connect to derp
servers, so devs don't have to acquire a valid TLS cert.
2. Creating an envknob telling clients which derp server to connect
to, so devs don't have to edit the ACLs in the admin console to add a
custom DERP map.
3. Explaining how the -dev and -a command lines args to derper
interact.
To use this:
1. Run derper with -dev.
2. Run tailscaled with TS_DEBUG_USE_DERP_HTTP=1 and
TS_DEBUG_USE_DERP_ADDR=localhost
This will result in the client connecting to derp via HTTP on port
3340.
Fixes#7700
Signed-off-by: Val <valerie@tailscale.com>
I realized that a lot of the problems that we're seeing around migration and
LocalBackend state can be avoided if we drive Windows pref migration entirely
from within tailscaled. By doing it this way, tailscaled can automatically
perform the migration as soon as the connection with the client frontend is
established.
Since tailscaled is already running as LocalSystem, it already has access to
the user's local AppData directory. The profile manager already knows which
user is connected, so we simply need to resolve the user's prefs file and read
it from there.
Of course, to properly migrate this information we need to also check system
policies. I moved a bunch of policy resolution code out of the GUI and into
a new package in util/winutil/policy.
Updates #7626
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This adds the util/sysresources package, which currently only contains a
function to return the total memory size of the current system.
Then, we modify magicsock to scale the number of buffered DERP messages
based on the system's available memory, ensuring that we never use a
value lower than the previous constant of 32.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib763c877de4d0d4ee88869078e7d512f6a3a148d
#7339 changed the root directory logic to find the ancestor of the cwd
with a go.mod file. This works when running the the binary from this
repo directly, but breaks when we're a dependency in another repo.
Allow the directory to be passed in via a -rootdir flag (the repo that
depends on it can then use `go list -m -f '{{.Dir}}' tailscale.com`
or similar to pass in the value).
Updates tailscale/corp#10165
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
When running a SOCKS or HTTP proxy, configure the tshttpproxy package to
drop those addresses from any HTTP_PROXY or HTTPS_PROXY environment
variables.
Fixes#7407
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I6cd7cad7a609c639780484bad521c7514841764b
This adds support to make exit nodes and subnet routers work
when in scenarios where NAT is required.
It also updates the NATConfig to be generated from a `wgcfg.Config` as
that handles merging prefs with the netmap, so it has the required information
about whether an exit node is already configured and whether routes are accepted.
Updates tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Since users can run tailscaled in a variety of ways (root, non-root,
non-root with process capabilities on Linux), this check will print the
current process permissions to the log to aid in debugging.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ida93a206123f98271a0c664775d0baba98b330c7
In addition to checking the total hostname length, validate characters used in each DNS label and label length.
Updates https://github.com/tailscale/corp/issues/10012
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
* wgengine/magicsock: add envknob to send CallMeMaybe to non-existent peer
For testing older client version responses to the PeerGone packet format change.
Updates #4326
Signed-off-by: Val <valerie@tailscale.com>
* derp: remove dead sclient struct member replaceLimiter
Leftover from an previous solution to the duplicate client problem.
Updates #2751
Signed-off-by: Val <valerie@tailscale.com>
* derp, derp/derphttp, wgengine/magicsock: add new PeerGone message type Not Here
Extend the PeerGone message type by adding a reason byte. Send a
PeerGone "Not Here" message when an endpoint sends a disco message to
a peer that this server has no record of.
Fixes#4326
Signed-off-by: Val <valerie@tailscale.com>
---------
Signed-off-by: Val <valerie@tailscale.com>
We were checking against the wrong directory, instead if we
have a custom store configured just use that.
Fixes#7588Fixes#7665
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Kubernetes uses SPDY/3.1 which is incompatible with HTTP/2, disable it
in the transport and server.
Fixes#7645Fixes#7646
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change focuses on the backend log ID, which is the mostly commonly
used in the client. Tests which don't seem to make use of the log ID
just use the zero value.
Signed-off-by: Will Norris <will@tailscale.com>
This allows disabling spread mode, which is helpful if you are manually
running derpprobe in `--once` mode against a small number of DERP
machines.
Updates https://github.com/tailscale/corp/issues/9916
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
We were not handling tags at all, pass them through as Impersonate-Group headers.
And use the FQDN for tagged nodes as Impersonate-User.
Updates #5055
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This lets a tsnet binary share a server out over Tailscale Funnel.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
This reverts commit 6eca47b16c and fixes forward.
Previously the first ever streaming MapRequest that a client sent would also
set ReadOnly to true as it didn't have any endpoints and expected/relied on the
map poll to restart as soon as it got endpoints. However with 48f6c1eba4,
we would no longer restart MapRequests as frequently as we used to, so control
would only ever get the first streaming MapRequest which had ReadOnly=true.
Control would treat this as an uninteresting request and would not send it
any further netmaps, while the client would happily stay in the map poll forever
while litemap updates happened in parallel.
This makes it so that we never set `ReadOnly=true` when we are doing a streaming
MapRequest. This is no longer necessary either as most endpoint discovery happens
over disco anyway.
Co-authored-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change adds a ringbuffer to each magicsock endpoint that keeps a
fixed set of "changes"–debug information about what updates have been
made to that endpoint.
Additionally, this adds a LocalAPI endpoint and associated
"debug peer-status" CLI subcommand to fetch the set of changes for a given
IP or hostname.
Updates tailscale/corp#9364
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I34f726a71bddd0dfa36ec05ebafffb24f6e0516a
Add a DNS server which always responds as its own IP addresses.
Additionally add a tsnet TailscaleIPs() function to return the
IP addresses, both IPv4 and IPv6.
Updates https://github.com/tailscale/tailscale/issues/1748
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
No ListenPacket support yet, but Listen with a udp network type fit
easier into netstack's model to start.
Then added an example of using it to cmd/sniproxy with a little udp
:53 handler.
No tests in tsnet yet because we don't have support for dialing over
UDP in tsnet yet. When that's done, a new test can test both sides.
Updates #5871
Updates #1748
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have many function pointers that we replace for the duration of test and
restore it on test completion, add method to do that.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Now that we're using rand.Shuffle in a few locations, create a generic
shuffle function and use it instead. While we're at it, move the
interleaveSlices function to the same package for use.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0b00920e5b3eea846b6cedc30bd34d978a049fd3
The debug flag on tailscaled isn't available in the macOS App Store
build, since we don't have a tailscaled binary; move it to the
'tailscale debug' CLI that is available on all platforms instead,
accessed over LocalAPI.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7
Followup to #7177 to avoid adding extra dependencies to the CLI. We
instead declare an interface for the link monitor.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is to address a possible DNS failure on startup. Before this
change IPv6 addresses would be listed first, and the client dialer would
fail for hosts without IPv6 connectivity.
We had two implemenetations of the kube client, merge them.
containerboot was also using a raw http.Transport, this also has
the side effect of making it use a http.Client
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Given recent changes in corp, I originally thought we could remove all of the
syso files, but then I realized that we still need them so that binaries built
purely from OSS (without going through corp) will still receive a manifest.
We can remove the arm32 one though, since we don't support 32-bit ARM on Windows.
Updates https://github.com/tailscale/corp/issues/9576
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
"Device Authorization" was recently renamed to "Device Approval"
on the control side. This change updates the k8s operator to match.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
"Device Authorization" was recently renamed to "Device Approval"
on the control side. This change updates tsconnect to match.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Uses the hooks added by tailscale/go#45 to instrument the reads and
writes on the major code paths that do network I/O in the client. The
convention is to use "<package>.<type>:<label>" as the annotation for
the responsible code path.
Enabled on iOS, macOS and Android only, since mobile platforms are the
ones we're most interested in, and we are less sensitive to any
throughput degradation due to the per-I/O callback overhead (macOS is
also enabled for ease of testing during development).
For now just exposed as counters on a /v0/sockstats PeerAPI endpoint.
We also keep track of the current interface so that we can break out
the stats by interface.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
"Device Authorization" was recently renamed to "Device Approval"
on the control side. This change updates the linux cli to match.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The log ID types were moved to a separate package so that
code that only depend on log ID types do not need to link
in the logic for the logtail client itself.
Not all code need the logtail client.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This allows us to differentiate between the various tsnet apps that
we have like `golinks` and `k8s-operator`.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
trimmed builds don't have absolute path information in executable
metadata, which leads the runtime.Caller approach failing
mysteriously in yarn with complaints about relative package paths.
So, instead of using embedded package metadata to find paths,
expect that we're being invoked within the tailscale repo, and
locate the tsconnect directory that way.
Signed-off-by: David Anderson <danderson@tailscale.com>
This ensures that we put the kubeconfig in the correct directory from within the macOS Sandbox when
paired with tailscale/corp@3035ef7
Updates #7220
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In the switch to static toolchains, we removed a legacy oddity from the
toolchain URL structure, but forgot to update printdep.
Signed-off-by: David Anderson <danderson@tailscale.com>
With #6566 we added an external mechanism for getting the default
interface, and used it on macOS and iOS (see tailscale/corp#8201).
The goal was to be able to get the default physical interface even when
using an exit node (in which case the routing table would say that the
Tailscale utun* interface is the default).
However, the external mechanism turns out to be unreliable in some
cases, e.g. when multiple cellular interfaces are present/toggled (I
have occasionally gotten my phone into a state where it reports the pdp_ip1
interface as the default, even though it can't actually route traffic).
It was observed that `ifconfig -v` on macOS reports an "effective interface"
for the Tailscale utn* interface, which seems promising. By examining
the ifconfig source code, it turns out that this is done via a
SIOCGIFDELEGATE ioctl syscall. Though this is a private API, it appears
to have been around for a long time (e.g. it's in the 10.13 xnu release
at https://opensource.apple.com/source/xnu/xnu-4570.41.2/bsd/net/if_types.h.auto.html)
and thus is unlikely to go away.
We can thus use this ioctl if the routing table says that a utun*
interface is the default, and go back to the simpler mechanism that
we had before #6566.
Updates #7184
Updates #7188
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Tailnet-owned auth keys (which all OAuth-created keys are) must include tags, since there is no user to own the registered devices.
Signed-off-by: Will Norris <will@tailscale.com>
Also removes the toolchain builds from flake.nix. For now the flake
build uses upstream Go 1.20, a followup change will switch it back to
our custom toolchain.
Updates tailscale/corp#9005
Signed-off-by: David Anderson <danderson@tailscale.com>
When we make a connection to a server, we previously would verify with
the system roots, and then fall back to verifying with our baked-in
Let's Encrypt root if the system root cert verification failed.
We now explicitly check for, and log a health error on, self-signed
certificates. Additionally, we now always verify against our baked-in
Let's Encrypt root certificate and log an error if that isn't
successful. We don't consider this a health failure, since if we ever
change our server certificate issuer in the future older non-updated
versions of Tailscale will no longer be healthy despite being able to
connect.
Updates #3198
Change-Id: I00be5ceb8afee544ee795e3c7a2815476abc4abf
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
It's since been rewritten in Swift.
#cleanup
Change-Id: I0860d681e8728697804ce565f63c5613b8b1088c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It includes xtermjs/xterm.js#4216, which improves handling of some
escape sequences. Unfortunately it's not enough to fix the issue
with `ponysay`, but it does not hurt to be up to date.
Updates #6090
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
`prober.DERP` was created in #5988 based on derpprobe. Having used it
instead of derpprobe for a few months, I think we have enough confidence
that it works and can now migrate derpprobe to use the prober framework
and get rid of code duplication.
A few notable changes in behaviour:
- results of STUN probes over IPv4 and IPv6 are now reported separately;
- TLS probing now includes OCSP verification;
- probe names in the output have changed;
- ability to send Slack notification from the prober has been removed.
Instead, the prober now exports metrics in Expvar (/debug/vars) and
Prometheus (/debug/varz) formats.
Fixes https://github.com/tailscale/corp/issues/8497
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Makes the Wasm client more similar to the others, and allows the default
profile to be correctly picked up when restarting the client in dev
mode (where we persist the state in sessionStorage).
Also update README to reflect that Go wasm changes can be picked up
with just a reload (as of #5383)
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
There is no stable release yet, and for alpha we want people on the
unstable build while we iterate.
Updates #502
Signed-off-by: David Anderson <danderson@tailscale.com>
Update all code generation tools, and those that check for license
headers to use the new standard header.
Also update copyright statement in LICENSE file.
Fixes#6865
Signed-off-by: Will Norris <will@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
Running sync-containers in a GitHub workflow will be
simpler if we check github.Keychain, which uses the
GITHUB_TOKEN if present.
Updates https://github.com/tailscale/corp/issues/8461
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
The dependency injection functionality has been deprecated a while back
and it'll be removed in the 0.15 release of Controller Runtime. This
changeset sets the Client after creating the Manager, instead of using
InjectClient.
Signed-off-by: Vince Prignano <vince@prigna.com>
Per recent user confusion on a QNAP issue.
Change-Id: Ibda00013df793fb831f4088b40be8a04dfad17c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add `tailscale version --json` JSON output mode. This will be used
later for a double-opt-in (per node consent like Tailscale SSH +
control config) to let admins do remote upgrades via `tailscale
update` via a c2n call, which would then need to verify the
cmd/tailscale found on disk for running tailscale update corresponds
to the running tailscaled, refusing if anything looks amiss.
Plus JSON output modes are just nice to have, rather than parsing
unstable/fragile/obscure text formats.
Updates #6995
Updates #6907
Change-Id: I7821ab7fbea4612f4b9b7bdc1be1ad1095aca71b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
They changed a type in their SDK which meant others using the AWS APIs
in their Go programs (with newer AWS modules in their caller go.mod)
and then depending on Tailscale (for e.g. tsnet) then couldn't compile
ipn/store/awsstore.
Thanks to @thisisaaronland for bringing this up.
Fixes#7019
Change-Id: I8d2919183dabd6045a96120bb52940a9bb27193b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Create an interface and mock implementation of tailscale.LocalClient for
serve command tests.
Updates #6304Closes#6372
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
Goal: one way for users to update Tailscale, downgrade, switch tracks,
regardless of platform (Windows, most Linux distros, macOS, Synology).
This is a start.
Updates #755, etc
Change-Id: I23466da1ba41b45f0029ca79a17f5796c2eedd92
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
UI works remains, but data is there now.
Updates #4015
Change-Id: Ib91e94718b655ad60a63596e59468f3b3b102306
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The -terminate-tls flag is for the tcp subsubcommand, not the serve
subcommand like the usage example suggests.
Signed-off-by: salman <salman@tailscale.com>
QNAP's "Force HTTPS" mode redirects even localhost HTTP to
HTTPS, but uses a self-signed certificate which fails
verification. We accommodate this by disabling checking
of the cert.
Fixes https://github.com/tailscale/tailscale/issues/6903
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
We still accept the previous TS_AUTH_KEY for backwards compatibility, but the documented option name is the spelling we use everywhere else.
Updates #6321
Signed-off-by: David Anderson <danderson@tailscale.com>
With a42a594bb3, iOS uses netstack and
hence there are no longer any platforms which use the legacy MagicDNS path. As such, we remove it.
We also normalize the limit for max in-flight DNS queries on iOS (it was 64, now its 256 as per other platforms).
It was 64 for the sake of being cautious about memory, but now we have 50Mb (iOS-15 and greater) instead of 15Mb
so we have the spare headroom.
Signed-off-by: Tom DNetto <tom@tailscale.com>
This makes `tailscale debug watch-ipn` safe to use for troubleshooting
user issues, in addition to local debugging during development.
Signed-off-by: David Anderson <danderson@tailscale.com>
The macOS client was forgetting to call netstack.Impl.SetLocalBackend.
Change the API so that it can't be started without one, eliminating this
class of bug. Then update all the callers.
Updates #6764
Change-Id: I2b3a4f31fdfd9fdbbbbfe25a42db0c505373562f
Signed-off-by: Claire Wang <claire@tailscale.com>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's long & distracting for how low value it is.
Fixes#6766
Change-Id: I51364f25c0088d9e63deb9f692ba44031f12251b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In some configurations, user explicitly do not want to store
tailscale state in k8s secrets, because doing that leads to
some annoying permission issues with sidecar containers.
With this change, TS_KUBE_SECRET="" and TS_STATE_DIR=/foo
will force storage to file when running in kubernetes.
Fixes#6704.
Signed-off-by: David Anderson <danderson@tailscale.com>
The operator creates a fair bit of internal cluster state to manage proxying,
dumping it all in the default namespace is handy for development but rude
for production.
Updates #502
Signed-off-by: David Anderson <danderson@tailscale.com>
We used to need to do timed requeues in a few places in the reconcile logic,
and the easiest way to do that was to plumb reconcile.Result return values
around. But now we're purely event-driven, so the only thing we care about
is whether or not an error occurred.
Incidentally also fix a very minor bug where headless services would get
completely ignored, rather than reconciled into the correct state. This
shouldn't matter in practice because you can't transition from a headful
to a headless service without a deletion, but for consistency let's avoid
having a path that takes no definite action if a service of interest does
exist.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
Previously, we had to do blind timed requeues while waiting for
the tailscale hostname, because we looked up the hostname through
the API. But now the proxy container image writes back its hostname
to the k8s secret, so we get an event-triggered reconcile automatically
when the time is right.
Updates #502
Signed-off-by: David Anderson <danderson@tailscale.com>
As is convention in the k8s world, use zap for structured logging. For
development, OPERATOR_LOGGING=dev switches to a more human-readable output
than JSON.
Updates #502
Signed-off-by: David Anderson <danderson@tailscale.com>
Our reconcile loop gets triggered again when the StatefulSet object
finally disappears (in addition to when its deletion starts, as indicated
by DeletionTimestamp != 0). So, we don't need to queue additional
reconciliations to proceed with the remainder of the cleanup, that
happens organically.
Signed-off-by: David Anderson <danderson@tailscale.com>
Tests cover configuring a proxy through an annotation rather than a
LoadBalancerClass, and converting between those two modes at runtime.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
For other test cases, the operator is going to produce similar generated
objects in several codepaths, and those objects are large. Move them out
to helpers so that the main test code stays a bit more intelligible.
The top-level Service that we start and end with remains in the main test
body, because its shape at the start and end is one of the main things that
varies a lot between test cases.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
The test verifies one of the successful reconcile paths, where
a client requests an exposed service via a LoadBalancer class.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
Also introduces an intermediary interface for the tailscale client, in
preparation for operator tests that fake out the Tailscale API interaction.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
This was initially developed in a separate repo, but for build/release
reasons and because go module management limits the damage of importing
k8s things now, moving it into this repo.
At time of commit, the operator enables exposing services over tailscale,
with the 'tailscale' loadBalancerClass. It also currently requires an
unreleased feature to access the Tailscale API, so is not usable yet.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
We've been doing a hard kill of the subprocess, which is only safe as long as
both the cli and gui are not running and the subprocess has had the opportunity
to clean up DNS settings etc. If unattended mode is turned on, this is definitely
unsafe.
I changed babysitProc to close the subprocess's stdin to make it shut down, and
then I plumbed a cancel function into the stdin reader on the subprocess side.
Fixes https://github.com/tailscale/corp/issues/5621
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This is temporary while we work to upstream performance work in
https://github.com/WireGuard/wireguard-go/pull/64. A replace directive
is less ideal as it breaks dependent code without duplication of the
directive.
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This commit updates the wireguard-go dependency and implements the
necessary changes to the tun.Device and conn.Bind implementations to
support passing vectors of packets in tailscaled. This significantly
improves throughput performance on Linux.
Updates #414
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
Co-authored-by: James Tucker <james@tailscale.com>
This avoids the issue in the common case where the socket path is the
default path, avoiding the immediate need for a Windows shell quote
implementation.
Updates #6639
Signed-off-by: James Tucker <james@tailscale.com>
Fixes#6400
open up GETs for localapi serve-config to allow read-only access to
ServeConfig
`tailscale status` will include "Funnel on" status when Funnel is
configured. Prints nothing if Funnel is not running.
Example:
$ tailscale status
<nodes redacted>
# Funnel on:
# - https://node-name.corp.ts.net
# - https://node-name.corp.ts.net:8443
# - tcp://node-name.corp.ts.net:10000
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
We still have to shell out to `tailscale up` because the container image's
API includes "arbitrary flags to tailscale up", unfortunately. But this
should still speed up startup a little, and also enables k8s-bound containers
to update their device information as new netmap updates come in.
Fixes#6657
Signed-off-by: David Anderson <danderson@tailscale.com>
* Do not print the status at the end of a successful operation
* Ensure the key of the current node is actually trusted to make these changes
Signed-off-by: Tom DNetto <tom@tailscale.com>
WinTun is installed lazily by tailscaled while it is running as LocalSystem.
Based upon what we're seeing in bug reports and support requests, removing
WinTun as a lesser user may fail under certain Windows versions, even when that
user is an Administrator.
By adding a user-defined command code to tailscaled, we can ask the service to
do the removal on our behalf while it is still running as LocalSystem.
* The uninstall code is basically the same as it is in corp;
* The command code will be sent as a service control request and is protected by
the SERVICE_USER_DEFINED_CONTROL access right, which requires Administrator.
I'll be adding follow-up patches in corp to engage this functionality.
Updates https://github.com/tailscale/tailscale/issues/6433
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This handles the case where the inner *os.PathError is wrapped in
another error type, and additionally will redact errors of type
*os.LinkError. Finally, add tests to verify that redaction works.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie83424ff6c85cdb29fb48b641330c495107aab7c
x/exp/slices now has ContainsFunc (golang/go#53983) so we can delete
our versions.
Change-Id: I5157a403bfc1b30e243bf31c8b611da25e995078
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
renamed from `useNetstack` to `onlyNetstack` which is 1 letter more but
more descriptive because we always have netstack enabled and `useNetstack`
doesn't convey what it is supposed to be used for. e.g. we always use
netstack for Tailscale SSH.
Also renamed shouldWrapNetstack to handleSubnetsInNetstack as it was only used
to configure subnet routing via netstack.
Updates tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
To simplify clients getting the initial state when they subscribe.
Change-Id: I2490a5ab2411253717c74265a46a98012b80db82
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When running `tailscale web` as a standalone process,
it was necessary to send auth requests to QTS using
localhost to avoid hitting the proxy recursively.
However running `tailscale web` as a process means it is
consuming RAM all the time even when it isn't actively
doing anything.
After switching back to the `tailscale web` CGI mode, we
don't need to specifically use localhost for QNAP auth.
This reverts commit e0cadc5496.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
This reverts commit f1130421f0.
It was submitted with failing tests (go generate checks)
Requires a lot of API changes to fix so rolling back instead of
forward.
Change-Id: I024e8885c0ed44675d3028a662f386dda811f2ad
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds an envknob to make testing async startup more reproducible.
We want the Windows GUI to behave well when wintun is not (or it's
doing its initial slow driver installation), but during testing it's often
too fast to see that it's working. This lets it be slowed down.
Updates #6522
Change-Id: I6ae19f46e270ea679cbaea32a53888efcf2943a7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, tstun.Wrapper and magicsock.Conn managed their
own statistics data structure and relied on an external call to
Extract to extract (and reset) the statistics.
This makes it difficult to ensure a maximum size on the statistics
as the caller has no introspection into whether the number
of unique connections is getting too large.
Invert the control flow such that a *connstats.Statistics
is registered with tstun.Wrapper and magicsock.Conn.
Methods on non-nil *connstats.Statistics are called for every packet.
This allows the implementation of connstats.Statistics (in the future)
to better control when it needs to flush to ensure
bounds on maximum sizes.
The value registered into tstun.Wrapper and magicsock.Conn could
be an interface, but that has two performance detriments:
1. Method calls on interface values are more expensive since
they must go through a virtual method dispatch.
2. The implementation would need a sync.Mutex to protect the
statistics value instead of using an atomic.Pointer.
Given that methods on constats.Statistics are called for every packet,
we want reduce the CPU cost on this hot path.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Many packages reference the logtail ID types,
but unfortunately pull in the transitive dependencies of logtail.
Fix this problem by putting the log ID types in its own package
with minimal dependencies.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
I added util/winutil/LookupPseudoUser, which essentially consists of the bits
that I am in the process of adding to Go's standard library.
We check the provided SID for "S-1-5-x" where 17 <= x <= 20 (which are the
known pseudo-users) and then manually populate a os/user.User struct with
the correct information.
Fixes https://github.com/tailscale/tailscale/issues/869
Fixes https://github.com/tailscale/tailscale/issues/2894
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
tailscaled on Windows had two entirely separate start-up paths for running
as a service vs in the foreground. It's been causing problems for ages.
This unifies the two paths, making them be the same as the path used
for every other platform.
Also, it uses the new async LocalBackend support in ipnserver.Server
so the Server can start serving HTTP immediately, even if tun takes
awhile to come up.
Updates #6535
Change-Id: Icc8c4f96d4887b54a024d7ac15ad11096b5a58cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We use this pattern in a number of places (in this repo and elsewhere)
and I was about to add a fourth to this repo which was crossing the line.
Add this type instead so they're all the same.
Also, we have another Set type (SliceSet, which tracks its keys in
order) in another repo we can move to this package later.
Change-Id: Ibbdcdba5443fae9b6956f63990bdb9e9443cefa9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is step 1 of de-special-casing of Windows and letting the
LocalAPI HTTP server start serving immediately, even while the rest of
the world (notably the Engine and its TUN device) are being created,
which can take a few to dozens of seconds on Windows.
With this change, the ipnserver.New function changes to not take an
Engine and to return immediately, not returning an error, and let its
Run run immediately. If its ServeHTTP is called when it doesn't yet
have a LocalBackend, it returns an error. A TODO in there shows where
a future handler will serve status before an engine is available.
Future changes will:
* delete a bunch of tailscaled_windows.go code and use this new API
* add the ipnserver.Server ServerHTTP handler to await the engine
being available
* use that handler in the Windows GUI client
Updates #6522
Change-Id: Iae94e68c235e850b112a72ea24ad0e0959b568ee
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Still show original, but show de-punycode version in parens,
similar to how we show DNS-less hostnames.
Change-Id: I7e57da5e4029c5b49e8cd3014c350eddd2b3c338
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We'll eventually remove it entirely, but for now move get it out of ipnserver
where it's distracting and move it to its sole caller.
Updates #6522
Change-Id: I9c6f6a91bf9a8e3c5ea997952b7c08c81723d447
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's only used by Windows. No need for it to be in ipn/ipnserver,
which we're trying to trim down.
Change-Id: Idf923ac8b6cdae8b5338ec26c16fb8b5ea548071
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Unused in this repo as of the earlier #6450 (300aba61a6)
and unused in the Windows GUI as of tailscale/corp#8065.
With this ipn.BackendServer is no longer used and could also be
removed from this repo. The macOS and iOS clients still temporarily
depend on it, but I can move it to that repo instead while and let its
migration proceed on its own schedule while we clean this repo up.
Updates #6417
Updates tailscale/corp#8051
Change-Id: Ie13f82af3eb9f96b3a21c56cdda51be31ddebdcf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Follow-up to #6467 and #6506.
LocalBackend knows the server-mode state, so move more auth checking
there, removing some bookkeeping from ipnserver.Server.
Updates #6417
Updates tailscale/corp#8051
Change-Id: Ic5d14a077bf0dccc92a3621bd2646bab2cc5b837
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There are three specific requirements for Funnel to work:
1) They must accept an invite.
2) They must enable HTTPS.
3) The "funnel" node attribute must be appropriately set up in the ACLs.
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
This patch removes the crappy, half-backed COM initialization used by `go-ole`
and replaces that with the `StartRuntime` function from `wingoes`, a library I
have started which, among other things, initializes COM properly.
In particular, we should always be initializing COM to use the multithreaded
apartment. Every single OS thread in the process becomes implicitly initialized
as part of the MTA, so we do not need to concern ourselves as to whether or not
any particular OS thread has initialized COM. Furthermore, we no longer need to
lock the OS thread when calling methods on COM interfaces.
Single-threaded apartments are designed solely for working with Win32 threads
that have a message pump; any other use of the STA is invalid.
Fixes https://github.com/tailscale/tailscale/issues/3137
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Centralize the fake GOOS stuff, start to use it more. To be used more
in the future.
Change-Id: Iabacfbeaf5fca0b53bf4d5dbcdc0367f05a205f9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We're trying to gut 90% of the ipnserver package. A lot will get
deleted, some will move to LocalBackend, and a lot is being moved into
this new ipn/ipnauth package which will be leaf-y and testable.
This is a baby step towards moving some stuff to ipnauth.
Update #6417
Updates tailscale/corp#8051
Change-Id: I28bc2126764f46597d92a2d72565009dc6927ee0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit implements `tailscale lock log [--limit N]`, which displays an ordered list
of changes to network-lock state in a manner familiar to `git log`.
Signed-off-by: Tom DNetto <tom@tailscale.com>
This uses a go:generate statement to create a bunch of .syso files that
contain a Windows resource file. We check these in since they're less
than 1KiB each, and are only included on Windows.
Fixes#6429
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0512c3c0b2ab9d8d8509cf2037b88b81affcb81f
Current behavior is broken. tailscale serve text / "" returns no error
and shows up in tailscale serve status but requests return a 500
"empty handler".
Adds an error if the user passes in an empty string for the text
handler.
Closes#6405
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
This sets the "com.apple.quarantine" flag on macOS, and the
"Zone.Identifier" alternate data stream on Windows.
Change-Id: If14f805467b0e2963067937d7f34e08ba1d1fa85
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
This moves the NetworkLock key from a dedicated StateKey to be part of the persist.Persist struct.
This struct is stored as part for ipn.Prefs and is also the place where we store the NodeKey.
It also moves the ChonkDir from "/tka" to "/tka-profile/<profile-id>". The rename was intentional
to be able to delete the "/tka" dir if it exists.
This means that we will have a unique key per profile, and a unique directory per profile.
Note: `tailscale logout` will delete the entire profile, including any keys. It currently does not
delete the ChonkDir.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
QNAP 5.x works much better if we let Apache proxy
tailscale web, which means the URLs can no longer
be relative since apache sends us an internal
URL. Access QNAP authentication via
http://localhost:8080/ as documented in
https://download.qnap.com/dev/API_QNAP_QTS_Authentication.pdf
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
The key changed, but also we have a localapi method to set it anyway, so
use that.
Updates tailscale/corp#7515
Change-Id: Ia08ea2509f0bdd9b59e4c5de53aacf9a7d7eda36
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Run an inotify goroutine and watch if another program takes over
/etc/inotify.conf. Log if so.
For now this only logs. In the future I want to wire it up into the
health system to warn (visible in "tailscale status", etc) about the
situation, with a short URL to more info about how you should really
be using systemd-resolved if you want programs to not fight over your
DNS files on Linux.
Updates #4254 etc etc
Change-Id: I86ad9125717d266d0e3822d4d847d88da6a0daaa
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Noticed this while debugging something else, we would reset all routes if
either `--advertise-exit-node` or `--advertise-routes` were set. This handles
correctly updating them.
Also added tests.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The serve CLI doesn't exist yet, but we want nice tests for it when it
does exist.
Updates tailscale/corp#7515
Change-Id: Ib4c73d606242c4228f87410bbfd29bec52ca6c60
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
(I should've done this to start with.)
Updates tailscale/corp#7515
Change-Id: I7fb88cf95772790fd415ecf28fc52bde95507641
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Example output:
# Health check:
# - Some peers are advertising routes but --accept-routes is false
Also, move "tailscale status" health checks to the bottom, where they
won't be lost in large netmaps.
Updates #2053
Updates #6266
Change-Id: I5ae76a0cd69a452ce70063875cd7d974bfeb8f1a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If the --key-file output filename ends in ".pfx" or ".p12", use pkcs12
format.
This might not be working entirely correctly yet but might be enough for
others to help out or experiment.
Updates #2928
Updates #5011
Change-Id: I62eb0eeaa293b9fd5e27b97b9bc476c23dd27cf6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Map is a concurrent safe map that is a trivial wrapper
over a Go map and a sync.RWMutex.
It is optimized for use-cases where the entries change often,
which is the opposite use-case of what sync.Map is optimized for.
The API is patterned off of sync.Map, but made generic.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Temporarily at least. Makes sharing scripts during development easier.
Updates tailscale/corp#7515
Change-Id: I0e7aa461accd2c60740c1b37f3492b6bb58f1be3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The derpers don't allow whitespace in the challenge.
Change-Id: I93a8b073b846b87854fba127b5c1d80db205f658
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Leave only the HTTP/auth bits in localapi.
Change-Id: I8e23fb417367f1e0e31483e2982c343ca74086ab
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Only enable forwarding for an IP family if any forwarding is required
for that family.
Fixes#6221.
Signed-off-by: David Anderson <danderson@tailscale.com>
Not for end users (unless directed by support). Mostly for ease of
development for some upcoming webserver work.
Change-Id: I43acfed217514567acb3312367b24d620e739f88
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is similar to the golang.org/x/tools/internal/fastwalk I'd
previously written but not recursive and using mem.RO.
The metrics package already had some Linux-specific directory reading
code in it. Move that out to a new general package that can be reused
by portlist too, which helps its scanning of all /proc files:
name old time/op new time/op delta
FindProcessNames-8 2.79ms ± 6% 2.45ms ± 7% -12.11% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
FindProcessNames-8 62.9kB ± 0% 33.5kB ± 0% -46.76% (p=0.000 n=9+10)
name old allocs/op new allocs/op delta
FindProcessNames-8 2.25k ± 0% 0.38k ± 0% -82.98% (p=0.000 n=9+10)
Change-Id: I75db393032c328f12d95c39f71c9742c375f207a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The //go:build syntax was introduced in Go 1.17:
https://go.dev/doc/go1.17#build-lines
gofmt has kept the +build and go:build lines in sync since
then, but enough time has passed. Time to remove them.
Done with:
perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build')
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It is currently a `ipn.PrefsView` which means when we do a JSON roundtrip,
we go from an invalid Prefs to a valid one.
This makes it a pointer, which fixes the JSON roundtrip.
This was introduced in 0957bc5af2.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This implements the same functionality as the former run.sh, but in Go
and with a little better awareness of tailscaled's lifecycle.
Also adds TS_AUTH_ONCE, which fixes the unfortunate behavior run.sh had
where it would unconditionally try to reauth every time if you gave it
an authkey, rather than try to use it only if auth is actually needed.
This makes it a bit nicer to deploy these containers in automation, since
you don't have to run the container once, then go and edit its definition
to remove authkeys.
Signed-off-by: David Anderson <danderson@tailscale.com>
To collect some data on how widespread this is and whether there's
any correlation between different versions of Windows, etc.
Updates #4811
Change-Id: I003041d0d7e61d2482acd8155c1a4ed413a2c5c4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was from very early Tailscale and no longer makes sense.
Change-Id: I31b4e728789f26b0376ebe73aa1b4bbbb1d62607
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* Plumb disablement values through some of the internals of TKA enablement.
* Transmit the node's TKA hash at the end of sync so the control plane understands each node's head.
* Implement /machine/tka/disable RPC to actuate disablement on the control plane.
There is a partner PR for the control server I'll send shortly.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Make "tailscale set" by itself be equivalent to "tailscale set -h"
rather than just say "you did it wrong" and make people do another -h
step.
Change-Id: Iad2b2ddb2595c0121d2536de5b78648f3eded3e3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Make netlogfmt useful regardless of the exact schema of the input.
If a JSON object looks like a network log message,
then unmarshal it as one and then print it.
This allows netlogfmt to support both a stream of JSON objects
directly serialized from netlogtype.Message, or the schema
returned by the /api/v2/tailnet/{{tailnet}}/network-logs API endpoint.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The netlog.Message type is useful to depend on from other packages,
but doing so would transitively cause gvisor and other large packages
to be linked in.
Avoid this problem by moving all network logging types to a single package.
We also update staticcheck to take in:
003d277bcf
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Saves about 1.4MB from the generated wasm file. The Brotli size is
basically unchanged (it's actually slightly larger, by 40K), suggesting
that most of the size delta is due to not inlining and other changes
that were easily compressible.
However, it still seems worthwhile to have a smaller final binary, to
reduce parse time and increase likelihood that we fit in the browser's
disk cache. Actual performance appears to be unchanged.
Updates #5142
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Turns out using win32 instead of shelling out to child processes is a
bit faster:
name old time/op new time/op delta
GetListIncremental-4 278ms ± 2% 0ms ± 7% -99.93% (p=0.000 n=8+10)
name old alloc/op new alloc/op delta
GetListIncremental-4 238kB ± 0% 9kB ± 0% -96.12% (p=0.000 n=10+8)
name old allocs/op new allocs/op delta
GetListIncremental-4 1.19k ± 0% 0.02k ± 0% -98.49% (p=0.000 n=10+10)
Fixes#3876 (sadly)
Change-Id: I1195ac5de21a8a8b3cdace5871d263e81aa27e91
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
name old time/op new time/op delta
GetList-8 11.2ms ± 5% 11.1ms ± 3% ~ (p=0.661 n=10+9)
name old alloc/op new alloc/op delta
GetList-8 83.3kB ± 1% 67.4kB ± 1% -19.05% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
GetList-8 2.89k ± 2% 2.19k ± 1% -24.24% (p=0.000 n=10+10)
(real issue is we're calling this code as much as we are, but easy
enough to make it efficient because it'll still need to be called
sometimes in any case)
Updates #5958
Change-Id: I90c20278d73e80315a840aed1397d24faa308d93
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The Lufthansa in-flight wifi generates a synthetic 204 response to the
DERP server's /generate_204 endpoint. This PR adds a basic
challenge/response to the endpoint; something sufficiently complicated
that it's unlikely to be implemented by a captive portal. We can then
check for the expected response to verify whether we're being MITM'd.
Follow-up to #5601
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I94a68c9a16a7be7290200eea6a549b64f02ff48f
We removed it in #4806 in favor of the built-in functionality from the
nhooyr.io/websocket package. However, it has an issue with deadlines
that has not been fixed yet (see nhooyr/websocket#350). Temporarily
go back to using a custom wrapper (using the fix from our fork) so that
derpers will stop closing connections too aggressively.
Updates #5921
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Allows UI to display slightly more fine-grained progress when the SSH
connection is being established.
Updates tailscale/corp#7186
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This package parses a JSON stream of netlog.Message from os.Stdin
and pretty prints the contents as a stream of tables.
It supports reverse lookup of tailscale IP addresses if given
an API key and the tailnet that these traffic logs belong to.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This way we can do that once (out of band, in the GitHub action),
instead of increasing the time of each deploy that uses the package.
.wasm is removed from the list of automatically pre-compressed
extensions, an OSS bump and small change on the corp side is needed to
make use of this change.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
If the wgcfg.Config is specified with network logging arguments,
then Userspace.Reconfig starts up an asynchronous network logger,
which is shutdown either upon Userspace.Close or when Userspace.Reconfig
is called again without network logging or route arguments.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
If the username includes a suffix of +password, then we accept
password auth and just let them in like it were no auth.
This exists purely for SSH clients that get confused by seeing success
to their initial auth type "none".
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Change-Id: I616d4c64d042449fb164f615012f3bae246e91ec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When Tailscale is installed via Homebrew, `/usr/local/bin/tailscaled`
is a symlink to the actual binary.
Now when `tailscaled install-system-daemon` runs, it will not attempt
to overwrite that symlink if it already points to the tailscaled binary.
However, if executed binary and the link target differ, the path will
he overwritten - this can happen when a user decides to replace
Homebrew-installed tailscaled with a one compiled from source code.
Fixes#5353
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
188.166.70.128 port 2222 for now. Some hostname later maybe.
Change-Id: I9c329410035221ed6cdff7a482727d30b77eea8b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Send two banners with a second in between, this demonstrates the case
where all banners are shown after auth completes and not during.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
For SSH client authors to fix their clients without setting up
Tailscale stuff.
Change-Id: I8c7049398512de6cb91c13716d4dcebed4d47b9c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The window may not end up getting unloaded (if other beforeunload
handlers prevent the event), thus we should only close the SSH session
if it's truly getting unloaded.
Updates tailscale/corp#7304
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
If Wrapper.StatisticsEnable is enabled,
then per-connection counters are maintained.
If enabled, Wrapper.StatisticsExtract must be periodically called
otherwise there is unbounded memory growth.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
xterm 5.0 was released a few weeks ago, and it picks up
xtermjs/xterm.js#4069, which was the main reason why we were on a 5.0
beta.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
From the original commit that implemented it:
It accepts Postgres connections over Tailscale only, dials
out to the configured upstream database with TLS (using
strong settings, not the swiss cheese that postgres defaults to),
and proxies the client through.
It also keeps an audit log of the sessions it passed through,
along with the Tailscale-provided machine and user identity
of the connecting client.
In our other repo, this was:
commit 92e5edf98e8c2be362f564a408939a5fc3f8c539,
Change-Id I742959faaa9c7c302bc312c7dc0d3327e677dc28.
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: David Anderson <danderson@tailscale.com>
And add a CLI/localapi and c2n mechanism to enable it for a fixed
amount of time.
Updates #1548
Change-Id: I71674aaf959a9c6761ff33bbf4a417ffd42195a7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Most visible when using tsnet.Server, but could have resulted in dropped
messages in a few other places too.
Fixes#5743
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
I added new functions to winutil to obtain the state of a service and all
its depedencies, serialize them to JSON, and write them to a Logf.
When tstun.New returns a wrapped ERROR_DEVICE_NOT_AVAILABLE, we know that wintun
installation failed. We then log the service graph rooted at "NetSetupSvc".
We are interested in that specific service because network devices will not
install if that service is not running.
Updates https://github.com/tailscale/tailscale/issues/5531
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
* and move goroutine scrubbing code to its own package for reuse
* bump capver to 45
Change-Id: I9b4dfa5af44d2ecada6cc044cd1b5674ee427575
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
- removed some in-flow time calls
- increase buffer size to 2MB to overcome syscall cost
- move relative time computation from record to report time
Signed-off-by: James Tucker <james@tailscale.com>
* tailcfg, control/controlhttp, control/controlclient: add ControlDialPlan field
This field allows the control server to provide explicit information
about how to connect to it; useful if the client's link status can
change after the initial connection, or if the DNS settings pushed by
the control server break future connections.
Change-Id: I720afe6289ec27d40a41b3dcb310ec45bd7e5f3e
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Personal preference (so it's obvious it's not a bool flag), but it
also matches the --state= before it.
Bonus: stop allowing PORT to sneak in extra flags to be passed as
their own arguments, as $FOO and ${FOO} expand differently. (${FOO} is
required to concat to strings)
Change-Id: I994626a5663fe0948116b46a971e5eb2c4023216
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were just logging them to the console, which is useful for debugging,
but we may want to show them in the UI too.
Updates tailscale/corp#6939
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This doesn't change any behaviour for now, other than maybe running a
full netcheck more often. The intent is to start gathering data on
captive portals, and additionally, seeing this in the 'tailscale
netcheck' command should provide a bit of additional information to
users.
Updates #1634
Change-Id: I6ba08f9c584dc0200619fa97f9fde1a319f25c76
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Rhea Ghosh