tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	deac82231c	wgengine/magicsock: add start of alternate send path During development of silent disco (#540), an alternate send policy for magicsock that doesn't wake up the radio frequently with heartbeats, we want the old & new policies to coexist, like we did previously pre- and post-disco. We started to do that earlier in `5c42990c2f` but only set up the env+control knob plumbing to set a bool about which path should be used. This starts to add a way for the silent disco code to update the send path from a separate goroutine. (Part of the effort is going to de-state-machinify the event based soup that is the current disco code and make it more Go synchronous style.) So far this does nothing. (It does add an atomic load on each send but that should be noise in the grand scheme of things, and a even more rare atomic store of nil on node config changes.) Baby steps. Updates #540 Co-authored-by: Jenny Zhang <jz@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Joe Tsai	14100c0985	wgengine/magicsock: restore allocation-free endpoint.DstToString (#5971 ) The wireguard-go code unfortunately calls this unconditionally even when verbose logging is disabled. Partial revert of #5911. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Joe Tsai	9ee3df02ee	wgengine/magicsock: remove endpoint.wgEndpoint (#5911 ) This field seems seldom used and the documentation is wrong. It is simpler to just derive its original value dynamically when endpoint.DstToString is called. This method is potentially used by wireguard-go, but not in any code path is performance sensitive. All calls to it use it in conjunction with fmt.Printf, which is going to be slow anyways since it uses Go reflection. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
James Tucker	539c073cf0	wgengine/magicsock: set UDP socket buffer sizes to 7MB - At high data rates more buffer space is required in order to avoid packet loss during any cause of delay. - On slower machines more buffer space is required in order to avoid packet loss while decryption & tun writing is underway. - On higher latency network paths more buffer space is required in order to overcome BDP. - On Linux set with SO_*BUFFORCE to bypass net.core.{r,w}mem_max. - 7MB is the current default maximum on macOS 12.6 - Windows test is omitted, as Windows does not support getsockopt for these options. Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	1841d0bf98	wgengine/magicsock: make debug-level stuff not logged by default And add a CLI/localapi and c2n mechanism to enable it for a fixed amount of time. Updates #1548 Change-Id: I71674aaf959a9c6761ff33bbf4a417ffd42195a7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	3 years ago
Kyle Carberry	91794f6498	wgengine/magicsock: move firstDerp check after nil derpMap check This fixes a race condition which caused `c.muCond.Broadcast()` to never fire in the `firstDerp` if block. It resulted in `Close()` hanging forever. Signed-off-by: Kyle Carberry <kyle@carberry.com>	3 years ago
Brad Fitzpatrick	832031d54b	wgengine/magicsock: fix recently introduced data race From `5c42990c2f`, not yet released in a stable build. Caught by existing tests. Fixes #5685 Change-Id: Ia76bb328809d9644e8b96910767facf627830600 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
phirework	5c42990c2f	wgengine/magicsock: add client flag and envknob to disable heartbeat (#5638 ) Baby steps towards turning off heartbeat pings entirely as per #540. This doesn't change any current magicsock functionality and requires additional changes to send/disco paths before the flag can be turned on. Updates #540 Change-Id: Idc9a72748e74145b068d67e6dd4a4ffe3932efd0 Signed-off-by: Jenny Zhang <jz@tailscale.com> Signed-off-by: Jenny Zhang <jz@tailscale.com>	3 years ago
Eng Zer Jun	f0347e841f	refactor: move from io/ioutil to io and os packages The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit replaces the existing io/ioutil functions with their new definitions in io and os packages. Reference: https://golang.org/doc/go1.16#ioutil Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>	3 years ago
Brad Fitzpatrick	74674b110d	envknob: support changing envknobs post-init Updates #5114 Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	7c49db02a2	wgengine/magicsock: don't use BPF receive when SO_MARK doesn't work. Fixes #5607 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Colin Adler	9c8bbc7888	wgengine/magicsock: fix panic in http debug server Fixes an panic in `(*magicsock.Conn).ServeHTTPDebug` when the `recentPongs` ring buffer for an endpoint wraps around. Signed-off-by: Colin Adler <colin1adler@gmail.com>	3 years ago
James Tucker	672c2c8de8	wgengine/magicsock: add filter to ignore disco to old/other ports Incoming disco packets are now dropped unless they match one of the current bound ports, or have a zero port. The BPF filter passes all packets with a disco header to the raw packet sockets regardless of destination port (in order to avoid needing to reconfigure BPF on rebind). If a BPF enabled node has just rebound, due to restart or rebind, it may receive and reply to disco ping packets destined for ports other than those which are presently bound. If the pong is accepted, the pinging node will now assume that it can send WireGuard traffic to the pinged port - such traffic will not reach the node as it is not destined for a bound port. The zero port is ignored, if received. This is a speculative defense and would indicate a problem in the receive path, or the BPF filter. This condition is allowed to pass as it may enable traffic to flow, however it will also enable problems with the same symptoms this patch otherwise fixes. Fixes #5536 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	be140add75	wgengine/magicsock: fix regression in initial bind for js `1f959edeb0` introduced a regression for JS where the initial bind no longer occurred at all for JS. The condition is moved deeper in the call tree to avoid proliferation of higher level conditions. Updates #5537 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	1f959edeb0	wgengine/magicksock: remove nullability of RebindingUDPConns Both RebindingUDPConns now always exist. the initial bind (which now just calls rebind) now ensures that bind is called for both, such that they both at least contain a blockForeverConn. Calling code no longer needs to assert their state. Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	e470893ba0	wgengine/magicsock: use mak in another spot Change-Id: I0a46d6243371ae6d126005a2bd63820cb2d1db6b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Andrew Dunham	c72caa6672	wgengine/magicsock: use AF_PACKET socket + BPF to read disco messages This is entirely optional (i.e. failing in this code is non-fatal) and only enabled on Linux for now. Additionally, this new behaviour can be disabled by setting the TS_DEBUG_DISABLE_AF_PACKET environment variable. Updates #3824 Replaces #5474 Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Andrew Dunham	e945d87d76	util/uniq: use generics instead of reflect (#5491 ) This takes 75% less time per operation per some benchmarks on my mac. Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	3 years ago
Kris Brandow	5d559141d5	wgengine/magicsock: remove mention of Start The Start method was removed in `4c27e2fa22`, but the comment on NewConn still mentioned it doesn't do anything until this method is called. Signed-off-by: Kris Brandow <kris.brandow@gmail.com>	3 years ago
Andrew Dunham	f0d6f173c9	net/netcheck: try ICMP if UDP is blocked (#5056 ) Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	3 years ago
Maisem Ali	a9f6cd41fd	all: use syncs.AtomicValue Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	4950fe60bd	syncs, all: move to using Go's new atomic types instead of ours Fixes #5185 Change-Id: I850dd532559af78c3895e2924f8237ccc328449d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	9bb5a038e5	all: use atomic.Pointer Also add some missing docs. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	5381437664	logtail, net/portmapper, wgengine/magicsock: use fmt.Appendf Fixes #5206 Change-Id: I490bb92e774ce7c044040537e2cd864fcf1dbe5a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	5f6abcfa6f	all: migrate code from netaddr.FromStdAddr to Go 1.18 With caveat https://github.com/golang/go/issues/53607#issuecomment-1203466984 that then requires a new wrapper. But a simpler one at least. Updates #5162 Change-Id: I0a5265065bfcd7f21e8dd65b2bd74cae90d76090 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	8725b14056	all: migrate more code code to net/netip directly Instead of going through the tailscale.com/net/netaddr transitional wrappers. Updates #5162 Change-Id: I3dafd1c2effa1a6caa9b7151ecf6edd1a3fda3dd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	fb82299f5a	wgengine/magicsock: avoid RebindingUDPConn mutex in common read/write case Change-Id: I209fac567326f2e926bace2582dbc67a8bc94c78 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	116f55ff66	all: gofmt for Go 1.19 Updates #5210 Change-Id: Ib02cd5e43d0a8db60c1f09755a8ac7b140b670be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d8cb5aae17	tailcfg, control/controlclient: add tailcfg.PeersChangedPatch [capver 33] This adds a lighter mechanism for endpoint updates from control. Change-Id: If169c26becb76d683e9877dc48cfb35f90cc5f24 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Mihai Parparita	27a1ad6a70	wasm: exclude code that's not used on iOS for Wasm too It has similar size constraints. Saves ~1.9MB from the Wasm build. Updates #3157 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	4 years ago
Mihai Parparita	561f7be434	wgengine/magicsock: remove unused metric We don't increment the metricRecvData anywhere, just the per-protocol ones. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	4 years ago
James Tucker	f9e86e64b7	*: use WireGuard where logged, printed or named Signed-off-by: James Tucker <james@tailscale.com>	4 years ago
Maisem Ali	2265587d38	wgengine/{,magicsock}: add metrics for rebinds and restuns Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Brad Fitzpatrick	910ae68e0b	util/mak: move tailssh's mapSet into a new package for reuse elsewhere Change-Id: Idfe95db82275fd2be6ca88f245830731a0d5aecf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	f2041c9088	all: use strings.Cut even more Change-Id: I943ce72c6f339589235bddbe10d07799c4e37979 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	5f176f24db	go.mod: upgrade to the latest wireguard-go This pulls in a handful of fixes and an update to Go 1.18. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	1b57b0380d	wgengine/magicsock: remove final alloc from ReceiveFrom And now that we don't have to play escape analysis and inlining games, simplify the code. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	08cf54f386	wgengine/magicsock: fix goMajorVersion for 1.18 ts release The version string changed slightly. Adapt. And always check the current Go version to prevent future accidental regressions. I would have missed this one had I not explicitly manually checked it. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Maisem Ali	72d8672ef7	tailcfg: make Node.Hostinfo a HostinfoView Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Brad Fitzpatrick	2db6cd1025	ipn/ipnlocal, wgengine/magicsock, logpolicy: quiet more logs Updates #1548 Change-Id: Ied169f872e93be2857890211f2e018307d4aeadc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	730aa1c89c	derp/derphttp, wgengine/magicsock: prefer IPv6 to DERPs when IPv6 works Fixes #3838 Change-Id: Ie47a2a30c7e8e431512824798d2355006d72fb6a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	7a18fe3dca	wgengine/magicsock: make debugUseDerpRoute an opt.Bool. Can still be constant, just needs the extra methods. Fixes #3812 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	de4696da10	wgengine/magicsock: fix deadlock on shutdown This fixes a deadlock on shutdown. One goroutine is waiting to send on c.derpRecvCh before unlocking c.mu. The other goroutine is waiting to lock c.mu before receiving from c.derpRecvCh. #3736 has a more detailed explanation of the sequence of events. Fixes #3736 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	5404a0557b	wgengine/magicsock: remove a per-DERP-packet map lookup in common case Updates #150 Change-Id: Iffb6eccbe7ca97af97d29be63b7e37d487b3ba28 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	5a317d312d	wgengine/magicsock: enable DERP Return Path Optimization (DRPO) Turning this on at the beginning of the 1.21.x dev cycle, for 1.22. Updates #150 Change-Id: I1de567cfe0be3df5227087de196ab88e60c9eb56 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c6c39930cc	wgengine/magicsock: fix lock ordering deadlock with derphttp Fixes #3726 Change-Id: I32631a44dcc1da3ae47764728ec11ace1c78190d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	addda5b96f	wgengine/magicsock: fix watchdog timeout on Close when IPv6 not available The blockForeverConn was only using its sync.Cond one side. Looks like it was just forgotten. Fixes #3671 Change-Id: I4ed0191982cdd0bfd451f133139428a4fa48238c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	28bf53f502	wgengine/magicsock: reduce disco ping heartbeat aggressiveness a bit Bigger changes coming later, but this should improve things a bit in the meantime. Rationale: * 2 minutes -> 45 seconds: 2 minutes was overkill and never considered phones/battery at the time. It was totally arbitrary. 45 seconds is also arbitrary but is less than 2 minutes. * heartbeat from 2 seconds to 3 seconds: in practice this meant two packets per second (2 pings and 2 pongs every 2 seconds) because the other side was also pinging us every 2 seconds on their own. That's just overkill. (see #540 too) So in the worst case before: when we sent a single packet (say: a DNS packet), we ended up sending 61 packets over 2 minutes: the 1 DNS query and then then 60 disco pings (2 minutes / 2 seconds) & received the same (1 DNS response + 60 pongs). Now it's 15. In 1.22 we plan to remove this whole timer-based heartbeat mechanism entirely. The 5 seconds to 6.5 seconds change is just stretching out that interval so you can still miss two heartbeats (other 3 + 3 seconds would be greater than 5 seconds). This means that if your peer moves without telling you, you can have a path out for 6.5 seconds now instead of 5 seconds before disco finds a new one. That will also improve in 1.22 when we start doing UDP+DERP at the same time when confidence starts to go down on a UDP path. Updates #3363 Change-Id: Ic2314bbdaf42edcdd7103014b775db9cf4facb47 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	a201b89e4a	wgengine/magicsock: reconnect to DERP when its definition changes Change-Id: I7c560feb9e4a6e155a35ec764a68354f19f694e4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	7d9b1de3aa	netcheck,portmapper,magicsock: ignore some UDP write errors on Linux Treat UDP send EPERM errors as a lost UDP packet, not something super fatal. That's just the Linux firewall preventing it from going out. And add a leaf package net/neterror for that (and future) policy that all three packages can share, with tests. Updates #3619 Change-Id: Ibdb838c43ee9efe70f4f25f7fc7fdf4607ba9c1d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	2c94e3c4ad	wgengine/magicsock: don't unconditionally close DERP connections on rebind Only if the source address isn't on the currently active interface or a ping of the DERP server fails. Updates #3619 Change-Id: I6bf06503cff4d781f518b437c8744ac29577acc8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ae319b4636	wgengine/magicsock: add HTML debug handler to see magicsock state Change-Id: Ibc46f4e9651e1c86ec6f5d139f5e9bdc7a488415 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c7f5bc0f69	wgengine/magicsock: add metrics for sent disco messages We only tracked the transport type (UDP vs DERP), not what they were. Change-Id: Ia4430c1c53afd4634e2d9893d96751a885d77955 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	486059589b	all: gofmt -w -s (simplify) tests And it updates the build tag style on a couple files. Change-Id: I84478d822c8de3f84b56fa1176c99d2ea5083237 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	7b9c7bc42b	ipn/ipnstate: remove old deprecated TailAddr IPv4-only field It's been a bunch of releases now since the TailscaleIPs slice replacement was added. Change-Id: I3bd80e1466b3d9e4a4ac5bedba8b4d3d3e430a03 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	33c541ae30	ipn/ipnlocal: populate self status from netmap in ipnlocal, not magicsock. Fixes #1933 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	758c37b83d	net/netns: thread logf into control functions So that darwin can log there without panicking during tests. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	8ec44d0d5f	wgengine/magicsock: remove some log spam Fixes tailscale/corp#3070 Change-Id: Ie50031800ec8669e0596ad6d59d1e329a5c88516 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	b3d6704aa3	wgengine/magicsock: fix data race on endpoint.discoKey endpoint.discoKey is protected by endpoint.mu. endpoint.sendDiscoMessage was reading it without holding the lock. This showed up in a CI failure and is readily reproducible locally. The fix is in two parts. First, for Conn.enqueueCallMeMaybe, eliminate the one-line helper method endpoint.sendDiscoMessage; call Conn.sendDiscoMessage directly. This makes it more natural to read endpoint.discoKey in a context in which endpoint.mu is already held. Second, for endpoint.sendDiscoPing, explicitly pass the disco key as an argument. Again, this makes it easier to read endpoint.discoKey in a context in which endpoint.mu is already held. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	7901289578	wgengine/magicsock: add a stress test And add a peerMap validate method that checks its internal invariants. Updates tailscale/corp#3016 Change-Id: I23708e68ed44d81986d9e2be82029d4555547592 Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	5a60781919	wgengine/magicsock: increase TestDiscokeyChange connection timeout I believe that this should eliminate the flakiness. If GitHub CI manages to be even slower that can be believed (and I can believe a lot at this point), then we should roll this back and make some more invasive changes. Updates #654 Fixes #3247 (I hope) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	773af7292b	wgengine/magicsock: simplify peerMap.upsertEndpoint We can do the "maybe delete" check unilaterally: In the case of an insert, both oldDiscoKey and ep.discoKey will be the zero value. And since we don't use pi again, we can skip giving it a name, which makes scoping clearer. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	9da22dac3d	wgengine/magicsock: fix bug in peerMap.upsertEndpoint Found by inspection by David Crawshaw while investigating tailscale/corp#3016. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	16870cb754	wgengine/magicsock: fix typo in comment Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	41da7620af	go.mod: update wireguard-go to pick up roaming toggle wgengine/wgcfg: introduce wgcfg.NewDevice helper to disable roaming at all call sites (one real plus several tests). Fixes tailscale/corp#3016. Signed-off-by: David Anderson <danderson@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	24ea365d48	netcheck, controlclient, magicsock: add more metrics Updates #3307 Change-Id: Ibb33425764a75bde49230632f1b472f923551126 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	57b039c51d	util/clientmetrics: add new package to add metrics to the client And annotate magicsock as a start. And add localapi and debug handlers with the Prometheus-format exporter. Updates #3307 Change-Id: I47c5d535fe54424741df143d052760387248f8d3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	0532eb30db	all: replace tailcfg.DiscoKey with key.DiscoPublic. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	7e6a1ef4f1	tailcfg: use key.NodePublic in wire protocol types. Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	72ace0acba	wgengine/magicsock: use key.NodePublic instead of tailcfg.NodeKey. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	d6e7cec6a7	types/netmap: use key.NodePublic instead of tailcfg.NodeKey. Update #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	84c3a09a8d	types/key: export constants for key size, not a method. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	6422789ea0	disco: use key.NodePublic instead of tailcfg.NodeKey. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	418adae379	various: use NodePublic.AsNodeKey() instead of tailcfg.NodeKeyFromNodePublic() Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	eeb97fd89f	various: remove remaining uses of key.NewPrivate. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	ef241f782e	wgengine/magicsock: remove uses of tailcfg.DiscoKey. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	55b6753c11	wgengine/magicsock: remove use of key.{Public,Private}. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	c1d009b9e9	ipn/ipnstate: use key.NodePublic instead of the generic key.Public. Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	37c150aee1	derp: use new node key type. Update #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	e03fda7ae6	wgengine/magicsock: remove test uses of wgkey. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	94fb42d4b2	all: use testingutil.MinAllocsPerRun There are a few remaining uses of testing.AllocsPerRun: Two in which we only log the number of allocations, and one in which dynamically calculate the allocations target based on a different AllocsPerRun run. This also allows us to tighten the "no allocs" test in wgengine/filter. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	1df865a580	wgengine/magicsock: allow even fewer allocs per UDP receive We improved things again for Go 1.18. Lock that in. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	c1d377078d	wgengine/magicsock: use testingutil.MinAllocsPerRun This speeds up and deflakes the test. Fixes #2826 (again) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	c9bf773312	wgengine/magicsock: replace use of wgkey with new node key type. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	6e5175373e	types/netmap: use new node key type. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	a9c78910bd	wgengine/wgcfg: convert to use new node key type. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	b0b0a80318	net/netcheck: implement netcheck for js/wasm clients And the derper change to add a CORS endpoint for latency measurement. And a little magicsock change to cut down some log spam on js/wasm. Updates #3157 Change-Id: I5fd9e6f5098c815116ddc8ac90cbcd0602098a48 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Crawshaw	0b62f26349	magicsock: remove test data race Speculative, I haven't been able to replicate it locally. Fixes #3156 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
Brad Fitzpatrick	ed3fb197ad	wgengine/magicsock: fix/disable a few misc things to get js/wasm working Updates #3157 Change-Id: Ie9e3a772bb9878584080bb257b32150492e26eaf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	e25afc6656	wgengine/magicsock: don't try to determine endpoints on js/wasm Avoid netcheck, LocalAddr, etc. Updates #3157 Change-Id: Ibc875c787c0e101b8076e64833f4fcc809372815 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	6cb2705833	wgengine/magicsock: don't run UDP listeners on js/wasm Be DERP-only for now. (WebRTC can come later :)) Updates #3157 Change-Id: I56ebb3d914e37e8f4ab651306fd705b817ca381c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c30fa5903d	wgengine/magicsock: remove peerMap.byDiscoKey map No longer used. Updates #3088 Change-Id: I0ced3f87baa4053d3838d3c4a828ed0293923825 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Crawshaw	3552d86525	wgengine/magicsock: turn down timeouts in tests Before: --- PASS: TestActiveDiscovery (11.78s) --- PASS: TestActiveDiscovery/facing_easy_firewalls (5.89s) --- PASS: TestActiveDiscovery/facing_nats (5.89s) --- PASS: TestActiveDiscovery/simple_internet (0.89s) After: --- PASS: TestActiveDiscovery (1.98s) --- PASS: TestActiveDiscovery/facing_easy_firewalls (0.99s) --- PASS: TestActiveDiscovery/facing_nats (0.99s) --- PASS: TestActiveDiscovery/simple_internet (0.89s) Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	4 years ago
David Anderson	b956139b0c	wgengine/magicsock: track IP<>node mappings without relying on discokeys. Updates #3088. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	7a243ae5b1	wgengine/magicsock: finish TODO to speed up peerMap.forEachEndpointWithDiscoKey Now that peerMap tracks the set of nodes for a DiscoKey. Updates #3088 Change-Id: I927bf2bdfd2b8126475f6b6acc44bc799fcb489f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	11fdb14c53	wgengine/magicsock: don't check always-non-nil endpoint for nil-ness Continuation of `2aa5df7ac1`, remove nil check because it can never be nil. (It previously was able to be nil.) Change-Id: I59cd9ad611dbdcbfba680ed9b22e841b00c9d5e6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	e7eb46bced	wgengine/magicsock: add an explicit else branch to peerMap update. Clarifies that the replace+delete of peerinfo data is only when peerInfo already exists. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	2aa5df7ac1	wgengine/magicsock: document and enforce that peerInfo.ep is non-nil. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	521b44e653	wgengine/magicsock: move discoKey fields to the mutex-protected section. Fixes #3106 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	a6d02dc122	wgengine/magicsock: track which NodeKey each DiscoKey was last for This adds new fields (currently unused) to discoInfo to track what the last verified (unambiguous) NodeKey a DiscoKey last mapped to, and when. Then on CallMeMaybe, Pong and on most Pings, we update the mapping from DiscoKey to the current NodeKey for that DiscoKey. Updates #3088 Change-Id: Idc4261972084dec71cf8ec7f9861fb9178eb0a4d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c759fcc7d3	wgengine/magicsock: fix data race with sync.Pool in error+logging path Fixes #3122 Change-Id: Ib52e84f9bd5813d6cf2e80ce5b2296912a48e064 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	75a7779b42	disco, wgengine/magicsock: send self node key in disco pings This lets clients quickly (sub-millisecond within a local LAN) map from an ambiguous disco key to a node key without waiting for a CallMeMaybe (over relatively high latency DERP). Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Denton Gentry	def650b3e8	wgengine/magicsock: don't Rebind after STUN error if closed. https://github.com/tailscale/tailscale/pull/3014 added a rebind on STUN failure, which means there can now be a tailscale.com/wgengine/magicsock.(*RebindingUDPConn).ReadFromNetaddr in progress at the end of the test waiting for a STUN response which will never arrive. This causes a test flake due to the resource leak in those cases where the Conn decided to rebind. For whatever reason, it mostly flakes with Windows. If the Conn is closed, don't Rebind after a send error. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Brad Fitzpatrick	f55c2bccf5	wgengine/magicsock: don't call setAddrToDiscoLocked on DERP ping Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	569f70abfd	wgengine/magicsock: finish some renamings of discoEndpoint to endpoint Renames only; continuation of earlier `8049063d35` These kept confusing me while working on #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	695df497ba	wgengine/magicsock: delete peerMap.endpointForDiscoKey, remove remaining caller The one remaining caller of peerMap.endpointForDiscoKey was making the improper assumption that there's exactly 1 node with a given DiscoKey in the network. That was the cause of #3088. Now that all the other callers have been updated to not use endpointForDiscoKey, there's no need to try to keep maintaining that prone-to-misuse index. Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	04fd94acd6	wgengine/magicsock: remove endpointForDiscoKey call from handleDiscoMessage A DiscoKey maps 1:n to endpoints. When we get a disco pong, we don't necessarily know which endpoint sent it to us. Ask them all. There will only usually be 1 (and in rare circumstances 2). So it's easier to ask all two rather than building new maps from the random ping TxID to its endpoint. Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	151b4415ca	wgengine/magicsock: remove endpoint parameter from handlePingLocked We can reply to a ping without knowing which exact node it's from. As long as it's in our netmap, it's safe to reply. If there's more than one node with that discokey, it doesn't matter who we're relpying to. Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	d86081f353	wgengine/magicsock: add new discoInfo type for DiscoKey state, move some fields As more prep for removing the false assumption that you're able to map from DiscoKey to a single peer, move the lastPingFrom and lastPingTime fields from the endpoint type to a new discoInfo type, effectively upgrading the old sharedDiscoKey map (which only held a *[32]byte nacl precomputed key as its value) to discoInfo which then includes that naclbox key. Then start plumbing it into handlePing in prep for removing the need for handlePing to take an endpoint parameter. Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	e5779f019e	wgengine/magicsock: move temporary endpoint lookup later, add TODO to remove Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	36a07089ee	wgengine/magicsock: remove redundant/wrong sharedDiscoKey delete The pass just after in this method handles cleaning up sharedDiscoKey. No need to do it wrong (assuming DiscoKey => 1 node) earlier. Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	3e80806804	wgengine/magicsock: pass src NodeKey to handleDiscoMessage for DERP disco msgs And then use it to avoid another lookup-by-DiscoKey. Updates #3088	4 years ago
Brad Fitzpatrick	82fa15fa3b	wgengine/magicsock: start removing endpointForDiscoKey It's not valid to assume that a discokey is globally unique. This removes the first two of the four callers. Updates #3088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Avery Pennarun	0d4a0bf60e	magicsock: if STUN failed to send before, rebind before STUNning again. On iOS (and possibly other platforms), sometimes our UDP socket would get stuck in a state where it was bound to an invalid interface (or no interface) after a network reconfiguration. We can detect this by actually checking the error codes from sending our STUN packets. If we completely fail to send any STUN packets, we know something is very broken. So on the next STUN attempt, let's rebind the UDP socket to try to correct any problems. This fixes a problem where iOS would sometimes get stuck using DERP instead of direct connections until the backend was restarted. Fixes #2994 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
David Anderson	830f641c6b	wgengine/magicsock: update discokeys on netmap change. Fixes #3008. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	a722e48cef	wgengine/magicsock: skip alloc test with -race Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	31c1331415	wgengine/magicsock: deflake TestReceiveFromAllocs 100 iterations isn't enough with background allocs happening apparently. 1000 seems to be reliable. Fixes #2826 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	2238814b99	wgengine/magicsock: fix crash introduced in recent cleanups Fixes #2801 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	640134421e	all: update tests to use tstest.MemLogger And give MemLogger a mutex, as one caller had, which does match the logf contract better. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	efe8020dfa	wgengine/magicsock: fix race condition in tests. AFAICT this was always present, the log read mid-execution was never safe. But it seems like the recent magicsock refactoring made the race much more likely. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	5bacbf3744	wgengine/magicsock, health, ipn/ipnstate: track DERP-advertised health And add health check errors to ipnstate.Status (tailscale status --json). Updates #2746 Updates #2775 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	bb10443edf	wgengine/wgcfg: use just the hexlified node key as the WireGuard endpoint. The node key is all magicsock needs to find the endpoint that WireGuard needs. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	d00341360f	wgengine/magicsock: remove unused debug knob. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	dfd978f0f2	wgengine/magicsock: use NodeKey, not DiscoKey, as the trigger for lazy reconfig. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	4c27e2fa22	wgengine/magicsock: remove Start method from Conn. Over time, other magicsock refactors have made Start effectively a no-op, except that some other functions choose to panic if called before Start. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	1a899344bd	wgengine/magicsock: don't store tailcfg.Nodes alongside endpoints. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	b2181608b5	wgengine/magicsock: eagerly create endpoints in SetNetworkMap. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Emmanuel T Odeke	0daa32943e	all: add (*testing.B).ReportAllocs() to every benchmark This ensures that we can properly track and catch allocation slippages that could otherwise have been missed. Fixes #2748	4 years ago
David Anderson	44d71d1e42	wgengine/magicsock: fix race in test shutdown, again. We were returning an error almost, but not quite like errConnClosed in a single codepath, which could still trip the panic on reconfig in the test logic. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	f09ede9243	wgengine/magicsock: don't configure eager WireGuard handshaking in tests. Our prod code doesn't eagerly handshake, because our disco layer enables on-demand handshaking. Configuring both peers to eagerly handshake leads to WireGuard handshake races that make TestTwoDevicePing flaky. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	86d1c4eceb	wgengine/magicsock: ignore close races even harder. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	8bacfe6a37	wgengine/magicsock: remove unused sendLogLimit limiter. Magicsock these days gets its logs limited by the global log limiter. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	e151b74f93	wgengine/magicsock: remove opts.SimulatedNetwork. It only existed to override one test-only behavior with a different test-only behavior, in both cases working around an annoying feature of our CI environments. Instead, handle that weirdness entirely in the test code, with a tweaked TestOnlyPacketListener that gets injected. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	58c1f7d51a	wgengine/magicsock: rename opts.PacketListener to TestOnlyPacketListener. The docstring said it was meant for use in tests, but it's specifically a special codepath that is _only_ used in tests, so make the claim stronger. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	8049063d35	wgengine/magicsock: rename discoEndpoint to just endpoint. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	f2d949e2db	wgengine/magicsock: fold findEndpoint into its only remaining caller. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	fe2f89deab	wgengine/magicsock: fix rare shutdown race in test. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	97693f2e42	wgengine/magicsock: delete legacy AddrSet endpoints. Instead of using the legacy codepath, teach discoEndpoint to handle peers that have a home DERP, but no disco key. We can still communicate with them, but only over DERP. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
slowy07	ac0353e982	fix: typo spelling grammar Signed-off-by: slowy07 <slowy.arfy@gmail.com>	4 years ago
Brad Fitzpatrick	37053801bb	wgengine/magicsock: restore a bit of logging on node becoming active Fixes #2695 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	39610aeb09	wgengine/magicsock: move debug knobs to their own file, compile out on iOS No need for these knobs on iOS where you can set the environment variables anyway. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	f3c96df162	ipn/ipnstate: move tailscale status "active" determination to tailscaled Fixes #2579 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	b622c60ed0	derp,wgengine/magicsock: don't assume stringer is in $PATH for go:generate Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	8a3d52e882	wgengine/magicsock: use mono.Time magicsock makes multiple calls to Now per packet. Move to mono.Now. Changing some of the calls to use package mono has a cascading effect, causing non-per-packet call sites to also switch. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	4dbbd0aa4a	cmd/addlicense: add command to add licenseheaders to generated code And use it to make our stringer invocations match the existing code. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	c179580599	wgengine/magicsock: add debug envvar to force all traffic over DERP This would have been useful during debugging DERP issues recently. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	4f4dae32dd	wgengine/magicsock: fix latent data race in test logBufWriter had no serialization. It just so happens that none of its users currently ever log concurrently. Make it safe for concurrent use. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	7e7c4c1bbe	tailcfg: break DERPNode.DERPTestPort into DERPPort & InsecureForTests The DERPTestPort int meant two things before: which port to use, and whether to disable TLS verification. Users would like to set the port without disabling TLS, so break it into two options. Updates #1264 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	92077ae78c	wgengine/magicsock: make portmapping async Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
julianknodt	506c2fe8e2	cmd/tailscale: make netcheck use active DERP map, delete static copy After allowing for custom DERP maps, it's convenient to be able to see their latency in netcheck. This adds a query to the local tailscaled for the current DERPMap. Updates #1264 Signed-off-by: julianknodt <julianknodt@gmail.com>	4 years ago
David Crawshaw	5f8ffbe166	magicsock: add SetPreferredPort method Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	5 years ago
Josh Bleecher Snyder	ddf6c8c729	wgengine/magicsock: delete dead code Co-authored-by: Adrian Dewhurst <adrian@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	1ece91cede	go.mod: upgrade wireguard-windows, de-fork wireguard-go Pull in the latest version of wireguard-windows. Switch to upstream wireguard-go. This requires reverting all of our import paths. Unfortunately, this has to happen at the same time. The wireguard-go change is very low risk, as that commit matches our fork almost exactly. (The only changes are import paths, CI files, and a go.mod entry.) So if there are issues as a result of this commit, the first place to look is wireguard-windows changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w(.)\.Port = (.) -> $1 = $1.WithPort($2) \w(.)\.IP = (.) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	ebcd7ab890	wgengine: remove wireguard-go DeviceOptions We no longer need them. This also removes the 32 bytes of prefix junk before endpoints. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	aacb2107ae	all: add extra information to serialized endpoints magicsock.Conn.ParseEndpoint requires a peer's public key, disco key, and legacy ip/ports in order to do its job. We currently accomplish that by: * adding the public key in our wireguard-go fork * encoding the disco key as magic hostname * using a bespoke comma-separated encoding It's a bit messy. Instead, switch to something simpler: use a json-encoded struct containing exactly the information we need, in the form we use it. Our wireguard-go fork still adds the public key to the address when it passes it to ParseEndpoint, but now the code compensating for that is just a couple of simple, well-commented lines. Once this commit is in, we can remove that part of the fork and remove the compensating code. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	ddd85b9d91	wgengine/magicsock: rename discoEndpoint.wgEndpointHostPort to wgEndpoint Fields rename only. Part of the general effort to make our code agnostic about endpoint formatting. It's just a name, but it will soon be a misleading one; be more generic. Do this as a separate commit because it generates a lot of whitespace changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	e0bd3cc70c	wgengine/magicsock: use netaddr.MustParseIPPrefix Delete our bespoke helper. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	bc68e22c5b	all: s/CreateEndpoint/ParseEndpoint/ in docs Upstream wireguard-go renamed the interface method from CreateEndpoint to ParseEndpoint. I missed some comments. Fix them. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	a0dacba877	wgengine/magicsock: simplify legacy endpoint DstToString Legacy endpoints (addrSet) currently reconstruct their dst string when requested. Instead, store the dst string we were given to begin with. In addition to being simpler and cheaper, this makes less code aware of how to interpret endpoint strings. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	64047815b0	wgenengine/magicsock: delete cursed tests Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	7ee891f5fd	all: delete wgcfg.Key and wgcfg.PrivateKey For historical reasons, we ended up with two near-duplicate copies of curve25519 key types, one in the wireguard-go module (wgcfg) and one in the tailscale module (types/wgkey). Then we moved wgcfg to the tailscale module. We can now remove the wgcfg key type in favor of wgkey. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	9d542e08e2	wgengine/magicsock: always run ReceiveIPv6 One of the consequences of the bind refactoring in `6f23087175` is that attempting to bind an IPv6 socket will always result in c.pconn6.pconn being non-nil. If the bind fails, it'll be set to a placeholder packet conn that blocks forever. As a result, we can always run ReceiveIPv6 and health check it. This removes IPv4/IPv6 asymmetry and also will allow health checks to detect any IPv6 receive func failures. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	fe50ded95c	health: track whether we have a functional udp4 bind Suggested-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	7dc7078d96	wgengine/magicsock: use netaddr.IP in listenPacket It must be an IP address; enforce that at the type level. Suggested-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	3c543c103a	wgengine/magicsock: unify initial bind and rebind We had two separate code paths for the initial UDP listener bind and any subsequent rebinds. IPv6 got left out of the rebind code. Rather than duplicate it there, unify the two code paths. Then improve the resulting code: * Rebind had nested listen attempts to try the user-specified port first, and then fall back to :0 if that failed. Convert that into a loop. * Initial bind tried only the user-specified port. Rebind tried the user-specified port and 0. But there are actually three ports of interest: The one the user specified, the most recent port in use, and 0. We now try all three in order, as appropriate. * In the extremely rare case in which binding to port 0 fails, use a dummy net.PacketConn whose reads block until close. This will keep the wireguard-go receive func goroutine alive. As a pleasant side-effect of this, if we decide that we need to resuscitate #1796, it will now be much easier. Fixes #1799 Co-authored-by: David Anderson <danderson@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	8fb66e20a4	wgengine/magicsock: remove DefaultPort const Assume it'll stay at 0 forever, so hard-code it and delete code conditional on it being non-0. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	a8f61969b9	wgengine/magicsock: remove context arg from listenPacket It was set to context.Background by all callers, for the same reasons. Set it locally instead, to simplify call sites. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	744de615f1	health, wgenegine: fix receive func health checks for the fourth time The old implementation knew too much about how wireguard-go worked. As a result, it missed genuine problems that occurred due to unrelated bugs. This fourth attempt to fix the health checks takes a black box approach. A receive func is healthy if one (or both) of these conditions holds: * It is currently running and blocked. * It has been executed recently. The second condition is required because receive functions are not continuously executing. wireguard-go calls them and then processes their results before calling them again. There is a theoretical false positive if wireguard-go go takes longer than one minute to process the results of a receive func execution. If that happens, we have other problems. Updates #1790 Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	0d4c8cb2e1	health: delete ReceiveFunc health checks They were not doing their job. They need yet another conceptual re-think. Start by clearing the decks. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	8d7f7fc7ce	health, wgenegine: fix receive func health checks yet again The existing implementation was completely, embarrassingly conceptually broken. We aren't able to see whether wireguard-go's receive function goroutines are running or not. All we can do is model that based on what we have done. This commit fixes that model. Fixes #1781 Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	5835a3f553	health, wgengine/magicsock: avoid receive function false positives Avery reported a sub-ms health transition from "receiveIPv4 not running" to "ok". To avoid these transient false-positives, be more precise about the expected lifetime of receive funcs. The problematic case is one in which they were started but exited prior to a call to connBind.Close. Explicitly represent started vs running state, taking care with the order of updates. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	f845aae761	health: track whether magicsock receive functions are running Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	48e30bb8de	wgengine/magicsock: remove named return Doesn't add anything. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	a2a2c0ce1c	wgengine/magicsock: fix two comments Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	b1e624ef04	wgengine/magicsock: remove unnecessary type assertions Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	98714e784b	wgengine/magicsock: improve Rebind logging We were accidentally logging oldPort -> oldPort. Log oldPort as well as c.port; if we failed to get the preferred port in a previous rebind, oldPort might differ from c.port. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Josh Bleecher Snyder	15ceacc4c5	wgengine/magicsock: accept a host and port instead of an addr in listenPacket This simplifies call sites and prevents accidental failure to use net.JoinHostPort. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	5 years ago
Brad Fitzpatrick	b993d9802a	ipn/ipnlocal, etc: require file sharing capability to send/recv files tailscale/corp#1582 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	762180595d	ipn/ipnstate: add PeerStatus.TailscaleIPs slice, deprecate TailAddr Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	34d2f5a3d9	tailcfg: add Endpoint, EndpointType, MapRequest.EndpointType Track endpoints internally with a new tailcfg.Endpoint type that includes a typed netaddr.IPPort (instead of just a string) and includes a type for how that endpoint was discovered (STUN, local, etc). Use []tailcfg.Endpoint instead of []string internally. At the last second, send it to the control server as the existing []string for endpoints, but also include a new parallel MapRequest.EndpointType []tailcfg.EndpointType, so the control server can start filtering out less-important endpoint changes from new-enough clients. Notably, STUN-discovered endpoints can be filtered out from 1.6+ clients, as they can discover them amongst each other via CallMeMaybe disco exchanges started over DERP. And STUN endpoints change a lot, causing a lot of MapResposne updates. But portmapped endpoints are worth keeping for now, as they they work right away without requiring the firewall traversal extra RTT dance. End result will be less control->client bandwidth. (despite negligible increase in client->control bandwidth) Updates tailscale/corp#1543 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Josh Bleecher Snyder	ba72126b72	wgengine/magicsock: remove RebindingUDPConn.FakeClosed It existed to work around the frequent opening and closing of the conn.Bind done by wireguard-go. The preceding commit removed that behavior, so we can simply close the connections when we are done with them. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	69cdc30c6d	wgengine/wgcfg: remove Config.ListenPort We don't use the port that wireguard-go passes to us (via magicsock.connBind.Open). We ignore it entirely and use the port we selected. When we tell wireguard-go that we're changing the listen_port, it calls connBind.Close and then connBind.Open. And in the meantime, it stops calling the receive functions, which means that we stop receiving and processing UDP and DERP packets. And that is Very Bad. That was never a problem prior to `b3ceca1dd7`, because we passed the SkipBindUpdate flag to our wireguard-go fork, which told wireguard-go not to re-bind on listen_port changes. That commit eliminated the SkipBindUpdate flag. We could write a bunch of code to work around the gap. We could add background readers that process UDP and DERP packets when wireguard-go isn't. But it's simpler to never create the conditions in which wireguard-go rebinds. The other scenario in which wireguard-go re-binds is device.Down. Conveniently, we never call device.Down. We go from device.Up to device.Close, and the latter only when we're shutting down a magicsock.Conn completely. Rubber-ducked-by: Avery Pennarun <apenwarr@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	b3ceca1dd7	wgengine/...: split into multiple receive functions Upstream wireguard-go has changed its receive model. NewDevice now accepts a conn.Bind interface. The conn.Bind is stateless; magicsock.Conns are stateful. To work around this, we add a connBind type that supports cheap teardown and bring-up, backed by a Conn. The new conn.Bind allows us to specify a set of receive functions, rather than having to shoehorn everything into ReceiveIPv4 and ReceiveIPv6. This lets us plumbing DERP messages directly into wireguard-go, instead of having to mux them via ReceiveIPv4. One consequence of the new conn.Bind layer is that closing the wireguard-go device is now indistinguishable from the routine bring-up and tear-down normally experienced by a conn.Bind. We thus have to explicitly close the magicsock.Conn when the close the wireguard-go device. One downside of this change is that we are reliant on wireguard-go to call receiveDERP to process DERP messages. This is fine for now, but is perhaps something we should fix in the future. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	34d4943357	all: gofmt -s The code is not obviously better or worse, but this makes the little warning triangle in my editor go away, and the distraction removal is worth it. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	1df162b05b	wgengine/magicsock: adapt CreateEndpoint signature to match wireguard-go Part of a temporary change to make merging wireguard-go easier. See https://github.com/tailscale/wireguard-go/pull/45. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	36a85e1760	wgengine/magicsock: don't call t.Fatal in magicStack.IP It can end up executing an a new goroutine, at which point instead of immediately stopping test execution, it hangs. Since this is unexpected anyway, panic instead. As a bonus, it makes call sites nicer and removes a kludge comment. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
David Anderson	016de16b2e	net/tstun: rename TUN to Wrapper. The tstun packagen contains both constructors for generic tun Devices, and a wrapper that provides additional functionality. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
David Anderson	588b70f468	net/tstun: merge in wgengine/tstun. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	81143b6d9a	ipn/ipnlocal: start of peerapi between nodes Also some necessary refactoring of the ipn/ipnstate too. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Josh Bleecher Snyder	28af46fb3b	wgengine: pass logger as a separate arg to device.NewDevice Adapt to minor API changes in wireguard-go. And factor out device.DeviceOptions variables. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	4b77eca2de	wgengine/magicsock: check returned error in addTestEndpoint Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Brad Fitzpatrick	c99f260e40	wgengine/magicsock: prefer IPv6 transport if roughly equivalent latency Fixes #1566 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	9643d8b34d	wgengine/magicsock: add an addrLatency type to combine an IPPort+time.Duration Updates #1566 (but no behavior changes as of this change) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	0994a9f7c4	wgengine{,/magicsock}: fix, improve "tailscale ping" to default routes and subnets e.g. $ tailscale ping 1.1.1.1 exit node found but not enabled $ tailscale ping 10.2.200.2 node "tsbfvlan2" found, but not using its 10.2.200.0/24 route $ sudo tailscale up --accept-routes $ tailscale ping 10.2.200.2 pong from tsbfvlan2 (100.124.196.94) via 10.2.200.34:41641 in 1ms $ tailscale ping mon.ts.tailscale.com pong from monitoring (100.88.178.64) via DERP(sfo) in 83ms pong from monitoring (100.88.178.64) via DERP(sfo) in 21ms pong from monitoring (100.88.178.64) via [2604:a880:4:d1::37:d001]:41641 in 22ms This necessarily moves code up from magicsock to wgengine, so we can look at the actual wireguard config. Fixes #1564 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	7e0d12e7cc	wgengine/magicsock: don't update control if only endpoint order changes Updates #1559 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	32562a82a9	wgengine/magicsock: annotate a few more disco logs as verbose Fixes #1540 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	c19ed37b0f	wgengine/magicsock: mark some legacy debug log output as verbose Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	ba8c6d0775	health, controlclient, ipn, magicsock: tell health package state of things Not yet checking anything. Just plumbing states into the health package. Updates #1505 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	44ab0acbdb	net/portmapper, wgengine/monitor: cache gateway IP info until link changes Cuts down allocs & CPU in steady state (on regular STUN probes) when network is unchanging. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	c81814e4f8	derp{,/derphttp},magicsock: tell DERP server when ping acks can be expected Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	c576fea60e	wgengine/magicsock: delete unused WhoIs method that was moved elsewhere Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	ef7bac2895	tailcfg, net/portmapper, wgengine/magicsock: add NetInfo.HavePortMap Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	79d8288f0a	wgengine/magicsock, derp, derp/derphttp: respond to DERP server->client pings No server support yet, but we want Tailscale 1.6 clients to be able to respond to them when the server can do it. Updates #1310 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	387e83c8fe	wgengine/magicsock: fix Conn.Rebind race that let ErrClosed errors be read There was a logical race where Conn.Rebind could acquire the RebindingUDPConn mutex, close the connection, fail to rebind, release the mutex, and then because the mutex was no longer held, ReceiveIPv4 wouldn't retry reads that failed with net.ErrClosed, letting that error back to wireguard-go, which would then stop running that receive IP goroutine. Instead, keep the RebindingUDPConn mutex held for the entirety of the replacement in all cases. Updates tailscale/corp#1289 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	c445e3d327	wgengine/magicsock: fix typo in comment	5 years ago
Brad Fitzpatrick	a6d098c750	wgengine/magicsock: log when DERP connection succeeds Updates #1310	5 years ago
Brad Fitzpatrick	829eb8363a	net/interfaces: sort returned addresses from LocalAddresses Also change the type to netaddr.IP while here, because it made sorting easier. Updates tailscale/corp#1397 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	c3e5903b91	wgengine/magicsock: remove leftover portmapper debug logging It's already logged at the right time in logEndpointChange. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	ea3715e3ce	wgengine/magicsock: remove TODO about endpoints-over-DERP It was done in Tailscale 1.4 with CallMeMaybe disco messages containing endpoints. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	2404c0ffad	ipn/ipnlocal: only filter out default routes when computing the local wg config. UIs need to see the full unedited netmap in order to know what exit nodes they can offer to the user. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	e9e4f1063d	wgengine/magicsock: fix discoEndpoint caching bug when a node key changes Fixes #1391 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	c64bd587ae	net/portmapper: add NAT-PMP client, move port mapping service probing * move probing out of netcheck into new net/portmapper package * use PCP ANNOUNCE op codes for PCP discovery, rather than causing short-lived (sub-second) side effects with a 1-second-expiring map + delete. * track when we heard things from the router so we can be less wasteful in querying the router's port mapping services in the future * use portmapper from magicsock to map a public port Fixes #1298 Fixes #1080 Fixes #1001 Updates #864 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Josh Bleecher Snyder	c7e5ab8094	wgengine/magicsock: retry and re-send packets in TestTwoDevicePing When a handshake race occurs, a queued data packet can get lost. TestTwoDevicePing expected that the very first data packet would arrive. This caused occasional flakes. Change TestTwoDevicePing to repeatedly re-send packets and succeed when one of them makes it through. This is acceptable (vs making WireGuard not drop the packets) because this only affects communication with extremely old clients. And those extremely old clients will eventually connect, because the kernel will retry sends on timeout. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	1632f9fd6b	wgengine/magicsock: reduce log spam during tests Only do the type assertion to *net.UDPAddr when addr is non-nil. This prevents a bunch of log spam during tests.	5 years ago
Josh Bleecher Snyder	88586ec4a4	wgengine/magicsock: remove an alloc from ReceiveIPvN We modified the standard net package to not allocate a net.UDPAddr during a call to (net.UDPConn).ReadFromUDP if the caller's use of the net.UDPAddr does not cause it to escape. That is https://golang.org/cl/291390. This is the companion change to magicsock. There are two changes required. First, call ReadFromUDP instead of ReadFrom, if possible. ReadFrom returns a net.Addr, which is an interface, which always allocates. Second, reduce the lifetime of the returned net.UDPAddr. We do this by immediately converting it into a netaddr.IPPort. We left the existing RebindingUDPConn.ReadFrom method in place, as it is required to satisfy the net.PacketConn interface. With the upstream change and both of these fixes in place, we have removed one large allocation per packet received. name old time/op new time/op delta ReceiveFrom-8 16.7µs ± 5% 16.4µs ± 8% ~ (p=0.310 n=5+5) name old alloc/op new alloc/op delta ReceiveFrom-8 112B ± 0% 64B ± 0% -42.86% (p=0.008 n=5+5) name old allocs/op new allocs/op delta ReceiveFrom-8 3.00 ± 0% 2.00 ± 0% -33.33% (p=0.008 n=5+5) Co-authored-by: Sonia Appasamy <sonia@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	0c673c1344	wgengine/magicsock: unify on netaddr types in addrSet addrSet maintained duplicate lists of netaddr.IPPorts and net.UDPAddrs. Unify to use the netaddr type only. This makes (*Conn).ReceiveIPvN a bit uglier, but that'll be cleaned up in a subsequent commit. This is preparatory work to remove an allocation from ReceiveIPv4. Co-authored-by: Sonia Appasamy <sonia@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	4cd9218351	wgengine/magicsock: prevent logging while running benchmarks Co-authored-by: Sonia Appasamy <sonia@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	635e4c7435	wgengine/magicsock: increase legacy ping timeout again I based my estimation of the required timeout based on locally observed behavior. But CI machines are worse than my local machine. 16s was enough to reduce flakiness but not eliminate it. Bump it up again. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Brad Fitzpatrick	7e201806b1	wgengine/magicsock: reconnect to DERP home after network comes back up Updates #1310	5 years ago
Brad Fitzpatrick	9b4e50cec0	wgengine/magicsock: fix typo in comment	5 years ago
Brad Fitzpatrick	6b365b0239	wgengine/magicsock: fix DERP reader hang regression during concurrent reads Fixes #1282 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Josh Bleecher Snyder	e1f773ebba	wgengine/magicsock: allow more time for pings to transit We removed the "fast retry" code from our wireguard-go fork. As a result, pings can take longer to transit when retries are required. Allow that. Fixes #1277 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Brad Fitzpatrick	6d2b8df06d	wgengine/magicsock: add disabled failing (deadlocking) test for #1282 The fix can make this test run unconditionally. This moves code from `5c619882bc` for testability but doesn't fix it yet. The #1282 problem remains (when I wrote its wake-up mechanism, I forgot there were N DERP readers funneling into 1 UDP reader, and the code just isn't correct at all for that case). Also factor out some test helper code from BenchmarkReceiveFrom. The refactoring in magicsock.go for testability should have no behavior change.	5 years ago
Brad Fitzpatrick	1e7a35b225	types/netmap: split controlclient.NetworkMap off into its own leaf package Updates #1278 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	6064b6ff47	wgengine/wgcfg/nmcfg: split control/controlclient/netmap.go into own package It couldn't move to ipnlocal due to test dependency cycles. Updates #1278 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	ace57d7627	wgengine/magicsock: set a dummy private key in benchmark. Magicsock started dropping all traffic internally when Tailscale is shut down, to avoid spurious wireguard logspam. This made the benchmark not receive anything. Setting a dummy private key is sufficient to get magicsock to pass traffic for benchmarking purposes. Fixes #1270. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	f7eed25bb9	wgengine/magicsock: filter disco packets and packets when stopped from wireguard Fixes #1167 Fixes tailscale/corp#219 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Josh Bleecher Snyder	e8cd7bb66f	tstest: simplify goroutine leak tests Use tb.Cleanup to simplify both the API and the implementation. One behavior change: When the number of goroutines shrinks, don't log. I've never found these logs to be useful, and they frequently add noise. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	dd10babaed	wgenginer/magicsock: remove Addrs methods They are now unused. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	fe7c3e9c17	all: move wgcfg from wireguard-go This is mostly code movement from the wireguard-go repo. Most of the new wgcfg package corresponds to the wireguard-go wgcfg package. wgengine/wgcfg/device{_test}.go was device/config{_test}.go. There were substantive but simple changes to device_test.go to remove internal package device references. The API of device.Config (now wgcfg.DeviceConfig) grew an error return; we previously logged the error and threw it away. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Josh Bleecher Snyder	d5baeeed5c	wgengine: use Tailscale-style peer identifiers in logs Rewrite log lines on the fly, based on the set of known peers. This enables us to use upstream wireguard-go logging, but maintain the Tailscale-style peer public key identifiers that the rest of our systems (and people) expect. Fixes #1183 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Brad Fitzpatrick	9541886856	wgengine/magicsock: disable regular STUNs for all platforms by default Reduces background CPU & network. Updates #1034 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	c55d26967b	wgengine/magicsock: log more details of endpoints learned over disco Also, don't try to use IPv6 LinkLocalUnicast addresses for now. Like endpoints exchanged with control, we share them but don't yet use them. Updates #1172	5 years ago
Brad Fitzpatrick	359055d3fa	wgengine/magicsock: fix logging regression `c8c493f3d9` made it always say `created=false` which scared me when I saw it, as that would've implied things were broken much worse. Fortunately the logging was just wrong.	5 years ago
Brad Fitzpatrick	edf64e0901	wgengine/magicsock: send, use endpoints in CallMeMaybe messages Fixes #1172 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	b5b4992eff	disco: support parsing/encoding endpoints in call-me-maybe frames Updates #1172 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Josh Bleecher Snyder	d3dd7c6270	wgengine/magicsock: make legacy DstToString match Addrs DstToString is used in two places in wireguard-go: Logging and uapi. We are switching to use uapi for wireguard-go config. To preserve existing behavior, we need the full set of addrs. And for logging, having the full set of addrs seems useful. (The Addrs method itself is slated for removal. When that happens, the implementation will move to DstToString.) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	5 years ago
Brad Fitzpatrick	187e22a756	wgengine/magicsock: don't run the DERP cleanup so often To save CPU and wakeups, don't run the DERP cleanup timer regularly unless there is a non-home DERP connection open. Also eliminates the goroutine, moving to a time.AfterFunc. Updates #1034 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Josh Bleecher Snyder	5fe5402fcd	Revert "wgengine/magicsock: shortcircuit discoEndpoint.heartbeat when its connection is closed" This reverts commit `08baa17d9a`. It caused deadlocks due to lock ordering violations. It was not the right fix, and thus should simply be reverted while we look for the right fix (if we haven't already found it in the interim; we've fixed other logging-after-test issues). Fixes #1161	5 years ago
Josh Bleecher Snyder	e4c075cd95	wgengine/magicsock: prevent log-after-test in TestTwoDevicePing	5 years ago
Brad Fitzpatrick	edce91a8a6	wgengine/magicsock: fix a naked return bug/crash where we returned (nil, true) The 'ok' from 'ipp, ok :=' above was the result parameter ok. Whoops.	5 years ago
Brad Fitzpatrick	51bd1feae4	wgengine/magicsock: add single element IPPort->endpoint cache in receive path name old time/op new time/op delta ReceiveFrom-4 21.8µs ± 2% 20.9µs ± 2% -4.27% (p=0.000 n=10+10) Updates #414 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	5c619882bc	wgengine/magicsock: simplify ReceiveIPv4+DERP path name old time/op new time/op delta ReceiveFrom-4 35.8µs ± 3% 21.9µs ± 5% -38.92% (p=0.008 n=5+5) Fixes #1145 Updates #414 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago

... 3 4 5 6 7 ...

733 Commits (60930d19c06de9469f4b65f4fd79eacdba3e3ee1)