tailscale

Commit Graph

Author	SHA1	Message	Date
Maisem Ali	ea9dd8fabc	Revert "ipn/ipnlocal: plumb ExitNodeDNSResolvers for IsWireGuardOnly exit nodes" This reverts commit `f6845b10f6`. Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
James Tucker	d52ab181c3	Revert "ipn/ipnlocal: allow Split-DNS and default resolvers with WireGuard nodes" This reverts commit `c7ce4e07e5`. Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
James Tucker	c7ce4e07e5	ipn/ipnlocal: allow Split-DNS and default resolvers with WireGuard nodes The initial implementation directly mirrored the behavior of Tailscale exit nodes, where the WireGuard exit node DNS took precedence over other configuration. This adjusted implementation treats the WireGuard DNS resolvers as a lower precedence default resolver than the tailnet default resolver, and allows split DNS configuration as well. This also adds test coverage to the existing DNS selection behavior with respect to default resolvers and split DNS routes for Tailscale exit nodes above cap 25. There may be some refinement to do in the logic in those cases, as split DNS may not be working as we intend, though that would be a pre-existing and separate issue. Updates #9377 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Tom DNetto	c08cf2a9c6	all: declare & plumb IPv6 masquerade address for peer This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing IPv6 NAT support to/from peers. A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing. Signed-off-by: Tom DNetto <tom@tailscale.com> Updates ENG-991	1 year ago
Maisem Ali	19a9d9037f	tailcfg: add NodeCapMap Like PeerCapMap, add a field to `tailcfg.Node` which provides a map of Capability to raw JSON messages which are deferred to be parsed later by the application code which cares about the specific capabilities. This effectively allows us to prototype new behavior without having to commit to a schema in tailcfg, and it also opens up the possibilities to develop custom behavior in tsnet applications w/o having to plumb through application specific data in the MapResponse. Updates #4217 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	4da0689c2c	tailcfg: add Node.HasCap helpers This makes a follow up change less noisy. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Sonia Appasamy	258f16f84b	ipn/ipnlocal: add tailnet MagicDNS name to ipn.LoginProfile Start backfilling MagicDNS suffixes on LoginProfiles. Updates #9286 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	1 year ago
Brad Fitzpatrick	0d991249e1	types/netmap: remove NetworkMap.{Addresses,MachineStatus} And convert all callers over to the methods that check SelfNode. Now we don't have multiple ways to express things in tests (setting fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't have multiple ways to check those two fields (often only checking one or the other). Updates #9443 Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	a61caea911	tailcfg: define a type for NodeCapability Instead of untyped string, add a type to identify these. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	3d37328af6	wgengine, proxymap: split out port mapping from Engine to new type (Continuing quest to remove rando stuff from the "Engine") Updates #cleanup Change-Id: I77f39902c2194410c10c054b545d70c9744250b0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	db2f37d7c6	ipn/ipnlocal: add some test accessors Updates tailscale/corp#12990 Change-Id: I82801ac4c003d2c7e1352c514adb908dbf01be87 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	9538e9f970	ipn/ipnlocal: keep internal map updated of latest Nodes post mutations We have some flaky integration tests elsewhere that have no one place to ask about the state of the world. This makes LocalBackend be that place (as it's basically there anyway) but doesn't yet add the ForTest accessor method. This adds a LocalBackend.peers map[NodeID]NodeView that is incrementally updated as mutations arrive. And then we start moving away from using NetMap.Peers at runtime (UpdateStatus no longer uses it now). And remove another copy of NodeView in the LocalBackend nodeByAddr map. Change that to point into b.peers instead. Future changes will then start streaming whole-node-granularity peer change updates to WatchIPNBus clients, tracking statefully per client what each has seen. This will get the GUI clients from receiving less of a JSON storm of updates all the time. Updates #1909 Change-Id: I14a976ca9f493bdf02ba7e6e05217363dcf422e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	926c990a09	types/netmap: start phasing out Addresses, add GetAddresses method NetworkMap.Addresses is redundant with the SelfNode.Addresses. This works towards a TODO to delete NetworkMap.Addresses and replace it with a method. This is similar to #9389. Updates #cleanup Change-Id: Id000509ca5d16bb636401763d41bdb5f38513ba0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	fb5ceb03e3	types/netmap: deprecate NetworkMap.MachineStatus, add accessor method Step 1 of deleting it, per TODO. Updates #cleanup Change-Id: I1d3d0165ae5d8b20610227d60640997b73568733 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	0f3c279b86	ipn/ipnlocal: delete some unused code Updates #cleanup Change-Id: I90b46c476f135124d97288e776c2b428b351b8b8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	760b945bc0	ipn/{ipnlocal,ipnstate}: start simplifying UpdateStatus/StatusBuilder * Remove unnecessary mutexes (there's no concurrency) * Simplify LocalBackend.UpdateStatus using the StatusBuilder.WantPeers field that was added in `0f604923d3`, removing passing around some method values into func args. And then merge two methods. More remains, but this is a start. Updates #9433 Change-Id: Iaf2d7ec6e4e590799f00bae185465a4fd089b822 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
James Tucker	f6845b10f6	ipn/ipnlocal: plumb ExitNodeDNSResolvers for IsWireGuardOnly exit nodes This enables installing default resolvers specified by tailcfg.Node.ExitNodeDNSResolvers when the exit node is selected. Updates #9377 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Marwan Sulaiman	3421784e37	cmd/tailscale/cli: use optimistic concurrency control on SetServeConfig This PR uses the etag/if-match pattern to ensure multiple calls to SetServeConfig are synchronized. It currently errors out and asks the user to retry but we can add occ retries as a follow up. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Brad Fitzpatrick	99bb355791	wgengine: remove DiscoKey method from Engine interface It has one user (LocalBackend) which can ask magicsock itself. Updates #cleanup Change-Id: I8c03cbb1e5ba57b0b442621b5fa467030c14a2e2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Tyler Smalley	82c1dd8732	cmd/tailscale: funnel wip cleanup and additional test coverage (#9316 ) General cleanup and additional test coverage of WIP code. * use enum for serveType * combine instances of ServeConfig access within unset * cleanMountPoint rewritten into cleanURLPath as it only handles URL paths * refactor and test expandProxyTargetDev > Note > Behind the `TAILSCALE_USE_WIP_CODE` flag updates #8489 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	1 year ago
Brad Fitzpatrick	3c276d7de2	wgengine: remove SetDERPMap method from Engine interface (continuing the mission of removing rando methods from the Engine interface that we don't need anymore) Updates #cleanup Change-Id: Id5190917596bf04d7185c3b331a852724a3f5a16 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	67396d716b	ipn/ipnlocal: remove defensiveness around not having a magicsock.Conn We always have one. Stop pretending we might not. Instead, add one early panic in NewLocalBackend if we actually don't. Updates #cleanup Change-Id: Iba4b78ed22cb6248e59c2b01a79355ca7a200ec8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	727b1432a8	wgengine: remove SetNetInfoCallback method from Engine LocalBackend can talk to magicsock on its own to do this without the "Engine" being involved. (Continuing a little side quest of cleaning up the Engine interface...) Updates #cleanup Change-Id: I8654acdca2b883b1bd557fdc0cfb90cd3a418a62 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	343c0f1031	wgengine{,/netstack}: remove AddNetworkMapCallback from Engine interface It had exactly one user: netstack. Just have LocalBackend notify netstack when here's a new netmap instead, simplifying the bloated Engine interface that has grown a bunch of non-Engine-y things. (plenty of rando stuff remains after this, but it's a start) Updates #cleanup Change-Id: I45e10ab48119e962fc4967a95167656e35b141d8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	3af051ea27	control/controlclient, types/netmap: start plumbing delta netmap updates Currently only the top four most popular changes: endpoints, DERP home, online, and LastSeen. Updates #1909 Change-Id: I03152da176b2b95232b56acabfb55dcdfaa16b79 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	7c1ed38ab3	ipn/ipnlocal: fix missing controlknobs.Knobs plumbing I missed connecting some controlknobs.Knobs pieces in `4e91cf20a8` resulting in that breaking control knobs entirely. Whoops. The fix in ipn/ipnlocal (where it makes a new controlclient) but to atone, I also added integration tests. Those integration tests use a new "tailscale debug control-knobs" which by itself might be useful for future debugging. Updates #9351 Change-Id: Id9c89c8637746d879d5da67b9ac4e0d2367a3f0d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Marwan Sulaiman	12d4685328	ipn/localapi, ipn/ipnlocal: add etag support for SetServeConfig This PR adds optimistic concurrency control in the local client and api in order to ensure multiple writes of the ServeConfig do not conflict with each other. Updates #9273 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Brad Fitzpatrick	4e91cf20a8	control/controlknobs, all: add plumbed Knobs type, not global variables Previously two tsnet nodes in the same process couldn't have disjoint sets of controlknob settings from control as both would overwrite each other's global variables. This plumbs a new controlknobs.Knobs type around everywhere and hangs the knobs sent by control on that instead. Updates #9351 Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	9a86aa5732	all: depend on zstd unconditionally, remove plumbing to make it optional All platforms use it at this point, including iOS which was the original hold out for memory reasons. No more reason to make it optional. Updates #9332 Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	d506a55c8a	ipn/ipnstate: address TODO about garbage during peer sorting Updates #cleanup Change-Id: I34938bca70a95571cc62ce1f76eaab5db8c2c3ef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	60e9bd6047	ipn/ipnstate: add some missing docs Updates #cleanup Change-Id: I689f8124a5986a98b8eb3891727d39c96408f0a7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Andrew Lytvynov	d23b8ffb13	cmd/tailscale/cli,ipn: mention available update in "tailscale status" (#9205 ) Cache the last `ClientVersion` value that was received from coordination server and pass it in the localapi `/status` response. When running `tailscale status`, print a message if `RunningAsLatest` is `false`. Updates #6907 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
Andrew Lytvynov	1073b56e18	ipn/ipnlocal: add logging and locking to c2n /update (#9290 ) Log some progress info to make updates more debuggable. Also, track whether an active update is already started and return an error if a concurrent update is attempted. Some planned future PRs: * add JSON output to `tailscale update` * use JSON output from `tailscale update` to provide a more detailed status of in-progress update (stage, download progress, etc) Updates #6907 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
Marwan Sulaiman	50990f8931	ipn, ipn/ipnlocal: add Foreground field for ServeConfig This PR adds a new field to the serve config that can be used to identify which serves are in "foreground mode" and then can also be used to ensure they do not get persisted to disk so that if Tailscaled gets ungracefully shutdown, the reloaded ServeConfig will not have those ports opened. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Marwan Sulaiman	51d3220153	ipn, ipn/ipnlocal: remove log streaming for StreamServe This PR removes the per request logging to the CLI as the CLI will not be displaying those logs initially. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Marwan Sulaiman	45eeef244e	ipn, ipn/ipnlocal: add Foreground field to ServeConfig This PR adds a new field to the ServeConfig which maps WatchIPNBus session ids to foreground serve configs. The PR also adds a DeleteForegroundSession method to ensure the config gets cleaned up on sessions ending. Note this field is not currently used but will be in follow up work. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Maisem Ali	cb3b281e98	ipn/ipnlocal: fix race in enterState It would acquire the lock, calculate `nextState`, relase the lock, then call `enterState` which would acquire the lock again. There were obvious races there which could lead to nil panics as seen in a test in a different repo. ``` panic: runtime error: invalid memory address or nil pointer dereference [signal SIGSEGV: segmentation violation code=0x2 addr=0x70 pc=0x1050f2c7c] goroutine 42240 [running]: tailscale.com/ipn/ipnlocal.(LocalBackend).enterStateLockedOnEntry(0x14002154e00, 0x6) tailscale.com/ipn/ipnlocal/local.go:3715 +0x30c tailscale.com/ipn/ipnlocal.(LocalBackend).enterState(0x14002154e00?, 0x14002e3a140?) tailscale.com/ipn/ipnlocal/local.go:3663 +0x8c tailscale.com/ipn/ipnlocal.(LocalBackend).stateMachine(0x14001f5e280?) tailscale.com/ipn/ipnlocal/local.go:3836 +0x2c tailscale.com/ipn/ipnlocal.(LocalBackend).setWgengineStatus(0x14002154e00, 0x14002e3a190, {0x0?, 0x0?}) tailscale.com/ipn/ipnlocal/local.go:1193 +0x4d0 tailscale.com/wgengine.(userspaceEngine).RequestStatus(0x14005d90300) tailscale.com/wgengine/userspace.go:1051 +0x80 tailscale.com/wgengine.NewUserspaceEngine.func2({0x14002e3a0a0, 0x2, 0x140025cce40?}) tailscale.com/wgengine/userspace.go:318 +0x1a0 tailscale.com/wgengine/magicsock.(Conn).updateEndpoints(0x14002154700, {0x105c13eaf, 0xf}) tailscale.com/wgengine/magicsock/magicsock.go:531 +0x424 created by tailscale.com/wgengine/magicsock.(*Conn).ReSTUN in goroutine 42077 tailscale.com/wgengine/magicsock/magicsock.go:2142 +0x3a4 ``` Updates tailscale/corp#14480 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Marwan Sulaiman	a4aa6507fa	ipn, ipn/ipnlocal: add session identifier for WatchIPNBus This PR adds a SessionID field to the ipn.Notify struct so that ipn buses can identify a session and register deferred clean up code in the future. The first use case this is for is to be able to tie foreground serve configs to a specific watch session and ensure its clean up when a connection is closed. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Brad Fitzpatrick	7175f06e62	util/rands: add package with HexString func We use it a number of places in different repos. Might as well make one. Another use is coming. Updates #cleanup Change-Id: Ib7ce38de0db35af998171edee81ca875102349a4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	52a19b5970	ipn/ipnlocal: prevent cc leaks on multiple Start calls If Start was called multiple times concurrently, it would create a new client and shutdown the previous one. However there was a race possible between shutting down the old one and assigning a new one where the concurent goroutine may have assigned another one already and it would leak. Updates tailscale/corp#14471 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	6bc15f3a73	ipn/ipnlocal: fix startIsNoopLocked It got broken back when FUS was introduced, but we never caught it. Updates tailscale/corp#14471 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	d06a75dcd0	ipn/ipnlocal: fix deadlock in resetControlClientLocked resetControlClientLocked is called while b.mu was held and would call cc.Shutdown which would wait for the observer queue to drain. However, there may be active callbacks from cc already waiting for b.mu resulting in a deadlock. This makes it so that resetControlClientLocked does not call Shutdown, and instead just returns the value. It also makes it so that any status received from previous cc are ignored. Updates tailscale/corp#12827 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Andrew Lytvynov	34e3450734	cmd/tailscale,ipn: add auto-update flags and prefs (#8861 ) The flags are hidden for now. Adding propagation to tailscaled and persistence only. The prefs field is wrapped in a struct to allow for future expansion (like update schedule). Updates #6907 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	1 year ago
Tyler Smalley	e1fbb5457b	cmd/tailscale: combine serve and funnel for debug wip funnel stream model (#9169 ) > Note > Behind the `TAILSCALE_USE_WIP_CODE` flag In preparing for incoming CLI changes, this PR merges the code path for the `serve` and `funnel` subcommands. See the parent issue for more context. The following commands will run in foreground mode when using the environment flag. ``` tailscale serve localhost:3000 tailscae funnel localhost:3000 ``` Replaces #9134 Updates #8489 Signed-off-by: Tyler Smalley <tyler@tailscale.com> Signed-off-by: Marwan Sulaiman <marwan@tailscale.com> Co-authored-by: Marwan Sulaiman <marwan@tailscale.com>	1 year ago
Brad Fitzpatrick	0c1e3ff625	ipn/ipnlocal: avoid calling Start from resetForProfileChangeLockedOnEntry During Shutdown of an ephemeral node, we called Logout (to best effort delete the node earlier), which then called back into resetForProfileChangeLockedOnEntry, which then tried to Start again. That's all a waste of work during shutdown and complicates other cleanups coming later. Updates #cleanup Change-Id: I0b8648cac492fc70fa97c4ebef919bbe352c5d7b Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	f7b7ccf835	control/controlclient, ipn/ipnlocal: unplumb a bool true literal opt Updates #cleanup Change-Id: I664f280a2e06b9875942458afcaf6be42a5e462a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	96277b63ff	ipn/ipnlocal: rename LogoutSync to Logout Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	f52273767f	ipn/ipnlocal: fix missing mutex usage for profileManager It required holding b.mu but was documented incorrectly, fix. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	959362a1f4	ipn/ipnlocal,control/controlclient: make Logout more sync We already removed the async API, make it more sync and remove the FinishLogout state too. This also makes the callback be synchronous again as the previous attempt was trying to work around the logout callback resulting in a client shutdown getting blocked forever. Updates #3833 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	7074a40c06	control/controlclient: run SetControlClientStatus in goroutine We have cases where the SetControlClientStatus would result in a Shutdown call back into the auto client that would block forever. The right thing to do here is to fix the LocalBackend state machine but thats a different dumpster fire that we are slowly making progress towards. This makes it so that the SetControlClientStatus happens in a different goroutine so that calls back into the auto client do not block. Also add a few missing mu.Unlocks in LocalBackend.Start. Updates #9181 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago

1 2 3 4 5 ...

1145 Commits (5f4d76c18c6da7bd8d7a0c737003725db0512722)