1158 Commits (586a88c710f74fd755618e13474a18ea7539fa2b)

Author	SHA1	Message	Date
Brad Fitzpatrick	3b73727e39	cmd/tailscale: de-punycode hostnames in status display ... Still show original, but show de-punycode version in parens, similar to how we show DNS-less hostnames. Change-Id: I7e57da5e4029c5b49e8cd3014c350eddd2b3c338 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	f45106d47c	ipn/ipnserver: move Windows-specific code to tailscaled_windows.go ... We'll eventually remove it entirely, but for now move get it out of ipnserver where it's distracting and move it to its sole caller. Updates #6522 Change-Id: I9c6f6a91bf9a8e3c5ea997952b7c08c81723d447 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	109aa3b2fb	cmd/tailscale: add start of "debug derp" subcommand ... Updates #6526 Change-Id: I84e440a8bd837c383000ce0cec4ff36b24249e8b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	f3ba268a96	ipn/ipnserver: move BabysitProc to tailscaled_windows.go ... It's only used by Windows. No need for it to be in ipn/ipnserver, which we're trying to trim down. Change-Id: Idf923ac8b6cdae8b5338ec26c16fb8b5ea548071 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7e016c1d90	ipn/ipnserver: remove IPN protocol server ... Unused in this repo as of the earlier #6450 (300aba61a6) and unused in the Windows GUI as of tailscale/corp#8065. With this ipn.BackendServer is no longer used and could also be removed from this repo. The macOS and iOS clients still temporarily depend on it, but I can move it to that repo instead while and let its migration proceed on its own schedule while we clean this repo up. Updates #6417 Updates tailscale/corp#8051 Change-Id: Ie13f82af3eb9f96b3a21c56cdda51be31ddebdcf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	0a842f353c	ipn/ipnserver: move more connection acceptance logic to LocalBackend ... Follow-up to #6467 and #6506. LocalBackend knows the server-mode state, so move more auth checking there, removing some bookkeeping from ipnserver.Server. Updates #6417 Updates tailscale/corp#8051 Change-Id: Ic5d14a077bf0dccc92a3621bd2646bab2cc5b837 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
shayne	0c4c66948b	cmd/tailscale/cli: Improve messaging when Funnel is unavailable. (#6502) ... There are three specific requirements for Funnel to work: 1) They must accept an invite. 2) They must enable HTTPS. 3) The "funnel" node attribute must be appropriately set up in the ACLs. Signed-off-by: Shayne Sweeney <shayne@tailscale.com>	2 years ago
Aaron Klotz	033bd94d4c	cmd/tailscaled, wgengine/router: use wingoes/com for COM initialization instead of go-ole ... This patch removes the crappy, half-backed COM initialization used by `go-ole` and replaces that with the `StartRuntime` function from `wingoes`, a library I have started which, among other things, initializes COM properly. In particular, we should always be initializing COM to use the multithreaded apartment. Every single OS thread in the process becomes implicitly initialized as part of the MTA, so we do not need to concern ourselves as to whether or not any particular OS thread has initialized COM. Furthermore, we no longer need to lock the OS thread when calling methods on COM interfaces. Single-threaded apartments are designed solely for working with Win32 threads that have a message pump; any other use of the STA is invalid. Fixes https://github.com/tailscale/tailscale/issues/3137 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	2 years ago
Brad Fitzpatrick	4d3713f631	envknob: add GOOS func ... Centralize the fake GOOS stuff, start to use it more. To be used more in the future. Change-Id: Iabacfbeaf5fca0b53bf4d5dbcdc0367f05a205f9 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
James Tucker	dc75b7cfd1	cmd/derpprobe: add -once flag for one-off CLI diagnostics ... Updates #6478 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	b1441d0044	cmd/stunc: add command for making debug stun requests ... Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	7bff7345cc	ipn/ipnauth: start splitting ipnserver into new ipnauth package ... We're trying to gut 90% of the ipnserver package. A lot will get deleted, some will move to LocalBackend, and a lot is being moved into this new ipn/ipnauth package which will be leaf-y and testable. This is a baby step towards moving some stuff to ipnauth. Update #6417 Updates tailscale/corp#8051 Change-Id: I28bc2126764f46597d92a2d72565009dc6927ee0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	5f6fec0eba	cmd/tailscale: fix 'debug local-creds' hostname ... Fixes #6446 Change-Id: I82f0a3dcf6aca25b7f67265533ee30a9d939d86f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	300aba61a6	ipn, cmd/tailscale/cli: add LocalAPI IPN bus watch, Start, convert CLI ... Updates #6417 Updates tailscale/corp#8051 Change-Id: I1ca360730c45ffaa0261d8422877304277fc5625 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	6708f9a93f	cmd/tailscale,ipn: implement lock log command ... This commit implements `tailscale lock log [--limit N]`, which displays an ordered list of changes to network-lock state in a manner familiar to `git log`. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Brad Fitzpatrick	0f7da5c7dc	ipn{,/ipnlocal}, client/tailscale: move Taildrop recv notifications to LocalAPI HTTP method ... Updates #6417 Change-Id: Iec544c477a0e5e9f1c6bf23555afec06255e2e22 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	41dd49391f	tstest/integration: add --accept-risk=all to tailscale down ... The test would fail if I was running it over SSH. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Andrew Dunham	a0ef51f570	cmd/{tailscale,tailscaled}: embed manifest into Windows binaries ... This uses a go:generate statement to create a bunch of .syso files that contain a Windows resource file. We check these in since they're less than 1KiB each, and are only included on Windows. Fixes #6429 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I0512c3c0b2ab9d8d8509cf2037b88b81affcb81f	2 years ago
Maisem Ali	b94b91c168	cmd/tailscale/cli: add ability to set short names for profiles ... This adds a `--nickname` flag to `tailscale login|set`. Updates #713 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Mihai Parparita	33520920c3	all: use strs.CutPrefix and strs.CutSuffix more ... Updates places where we use HasPrefix + TrimPrefix to use the combined function. Updates #5309 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
shayne	bdd8ce6692	cmd/tailscale/cli: disallow empty text "" from serve CLI (#6416) ... Current behavior is broken. tailscale serve text / "" returns no error and shows up in tailscale serve status but requests return a 500 "empty handler". Adds an error if the user passes in an empty string for the text handler. Closes #6405 Signed-off-by: Shayne Sweeney <shayne@tailscale.com>	2 years ago
shayne	f52a6d1b8c	cmd/tailscale/cli, ipn: move serve CLI funcs on to ServeConfig (#6401) ... Signed-off-by: Shayne Sweeney <shayne@tailscale.com>	2 years ago
shayne	a97369f097	cmd/tailscale/cli: flesh out serve CLI and tests (#6304) ... Signed-off-by: Shayne Sweeney <shayne@tailscale.com>	2 years ago
Andrew Dunham	0af61f7c40	cmd/tailscale, util/quarantine: set quarantine flags on files from Taildrop ... This sets the "com.apple.quarantine" flag on macOS, and the "Zone.Identifier" alternate data stream on Windows. Change-Id: If14f805467b0e2963067937d7f34e08ba1d1fa85 Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Maisem Ali	f3519f7b29	cmd/tailscale/cli: add login and switch subcommands ... Updates #713 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	1f4669a380	all: standardize on LocalAPI ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	235309adc4	all: store NL keys per profile ... This moves the NetworkLock key from a dedicated StateKey to be part of the persist.Persist struct. This struct is stored as part for ipn.Prefs and is also the place where we store the NodeKey. It also moves the ChonkDir from "/tka" to "/tka-profile/<profile-id>". The rename was intentional to be able to delete the "/tka" dir if it exists. This means that we will have a unique key per profile, and a unique directory per profile. Note: `tailscale logout` will delete the entire profile, including any keys. It currently does not delete the ChonkDir. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Denton Gentry	e0cadc5496	cmd/tailscale: access QNAP via localhost ... QNAP 5.x works much better if we let Apache proxy tailscale web, which means the URLs can no longer be relative since apache sends us an internal URL. Access QNAP authentication via http://localhost:8080/ as documented in https://download.qnap.com/dev/API_QNAP_QTS_Authentication.pdf Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Tom DNetto	3271daf7a3	cmd/tailscale,ipn: support disablement args in lock cli, implement disable ... * Support specifiying disablement values in lock init command * Support specifying rotation key in lock sign command * Implement lock disable command * Implement disablement-kdf command Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Brad Fitzpatrick	96e1582298	cmd/tailscale/cli: add debug 2021 --verbose flag ... Change-Id: Ic93c2a8451518755fb44b5c35272d9b9353fe4d4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	13bee8e91c	cmd/tailscale/cli: update serve debug set command after FUS profile change ... The key changed, but also we have a localapi method to set it anyway, so use that. Updates tailscale/corp#7515 Change-Id: Ia08ea2509f0bdd9b59e4c5de53aacf9a7d7eda36 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	001f482aca	net/dns: make "direct" mode on Linux warn on resolv.conf fights ... Run an inotify goroutine and watch if another program takes over /etc/inotify.conf. Log if so. For now this only logs. In the future I want to wire it up into the health system to warn (visible in "tailscale status", etc) about the situation, with a short URL to more info about how you should really be using systemd-resolved if you want programs to not fight over your DNS files on Linux. Updates #4254 etc etc Change-Id: I86ad9125717d266d0e3822d4d847d88da6a0daaa Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	8e85227059	cmd/tailscale/cli: [set] handle selectively modifying routes/exit node ... Noticed this while debugging something else, we would reset all routes if either `--advertise-exit-node` or `--advertise-routes` were set. This handles correctly updating them. Also added tests. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	0544d6ed04	cmd/tailscale/cli: continue fleshing out serve CLI tests ... The serve CLI doesn't exist yet, but we want nice tests for it when it does exist. Updates tailscale/corp#7515 Change-Id: Ib4c73d606242c4228f87410bbfd29bec52ca6c60 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	b5ac9172fd	cmd/tailscale/cli: move earlier shell test to its own files ... (I should've done this to start with.) Updates tailscale/corp#7515 Change-Id: I7fb88cf95772790fd415ecf28fc52bde95507641 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	29bc021dcd	cmd/tailscale/cli: add outline of serve CLI tests ... Updates tailscale/corp#7515 Change-Id: Ib3956d4756bdcea0da89238a3c520ce8ac8004ec Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	08e110ebc5	cmd/tailscale: make "up", "status" warn if routes and --accept-routes off ... Example output: # Health check: # - Some peers are advertising routes but --accept-routes is false Also, move "tailscale status" health checks to the bottom, where they won't be lost in large netmaps. Updates #2053 Updates #6266 Change-Id: I5ae76a0cd69a452ce70063875cd7d974bfeb8f1a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6aab4fb696	cmd/tailscale/cli: start making cert output support pkcs12 (p12) output ... If the --key-file output filename ends in ".pfx" or ".p12", use pkcs12 format. This might not be working entirely correctly yet but might be enough for others to help out or experiment. Updates #2928 Updates #5011 Change-Id: I62eb0eeaa293b9fd5e27b97b9bc476c23dd27cf6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	4c31183781	cmd/tailscale,ipn: minor fixes to tailscale lock commands ... * Fix broken add/remove key commands * Make lock status display whether the node is signed Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Maisem Ali	4d330bac14	ipn/ipnlocal: add support for multiple user profiles ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Pat Maddox	9bf3ef4167	ssh/tailssh: add Tailscale SSH (server) support on FreeBSD ... Change-Id: I607194b6ef99205e777f3df93a74ffe1a2e0344c Signed-off-by: Pat Maddox <pat@ratiopbc.com>	2 years ago
Mihai Parparita	7a07bc654b	ipn/localapi: rename /profile to /pprof ... Avoids name collision with profiles for user switching. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Joe Tsai	9a05cdd2b5	syncs: add Map (#6260) ... Map is a concurrent safe map that is a trivial wrapper over a Go map and a sync.RWMutex. It is optimized for use-cases where the entries change often, which is the opposite use-case of what sync.Map is optimized for. The API is patterned off of sync.Map, but made generic. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
David Anderson	65f3dab4c6	cmd/containerboot: make a tests table, add more tests. ... Also fix a bugs found while adding the tests, oops. Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	2111357568	cmd/containerboot: add tests. ... Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Brad Fitzpatrick	25e26c16ee	ipn/ipnlocal: start implementing web server bits of serve ... Updates tailscale/corp#7515 Change-Id: I96f4016161ba3c370492da941274c6d9a234c2bb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	c35dcd427f	cmd/tailscale/cli: make dev-store-set debug command a bit more magic ... Temporarily at least. Makes sharing scripts during development easier. Updates tailscale/corp#7515 Change-Id: I0e7aa461accd2c60740c1b37f3492b6bb58f1be3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	2daf0f146c	ipn/ipnlocal, wgengine/netstack: start handling ports for future serving ... Updates tailscale/corp#7515 Change-Id: I966e936e72a2ee99be8d0f5f16872b48cc150258 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	e85613aa2d	net/netcheck: don't use a space in the captive portal challenge ... The derpers don't allow whitespace in the challenge. Change-Id: I93a8b073b846b87854fba127b5c1d80db205f658 Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Brad Fitzpatrick	6d8320a6e9	ipn/{ipnlocal,localapi}: move most of cert.go to ipnlocal ... Leave only the HTTP/auth bits in localapi. Change-Id: I8e23fb417367f1e0e31483e2982c343ca74086ab Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
David Anderson	6acc27a92f	cmd/containerboot: be more targeted when enabling IP forwarding. ... Only enable forwarding for an IP family if any forwarding is required for that family. Fixes #6221. Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Brad Fitzpatrick	5bb7e0307c	cmd/tailscale, ipn/ipnlocal: add debug command to write to StateStore for dev ... Not for end users (unless directed by support). Mostly for ease of development for some upcoming webserver work. Change-Id: I43acfed217514567acb3312367b24d620e739f88 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
David Anderson	bf2d3cd074	cmd/containerboot: don't write device ID when not in Kubernetes. ... Fixes #6218. Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	e0669555dd	cmd/containerboot: don't write device ID into non-existent secret. ... Fixes #6211 Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Andrew Dunham	c2d7940ec0	cmd/tailscaled, net/tstun: add build tags to omit BIRD and TAP ... Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I7a39f4eeeb583b73ecffaf4c5f086a38e3a53e2e	2 years ago
Brad Fitzpatrick	db2cc393af	util/dirwalk, metrics, portlist: add new package for fast directory walking ... This is similar to the golang.org/x/tools/internal/fastwalk I'd previously written but not recursive and using mem.RO. The metrics package already had some Linux-specific directory reading code in it. Move that out to a new general package that can be reused by portlist too, which helps its scanning of all /proc files: name old time/op new time/op delta FindProcessNames-8 2.79ms ± 6% 2.45ms ± 7% -12.11% (p=0.000 n=10+10) name old alloc/op new alloc/op delta FindProcessNames-8 62.9kB ± 0% 33.5kB ± 0% -46.76% (p=0.000 n=9+10) name old allocs/op new allocs/op delta FindProcessNames-8 2.25k ± 0% 0.38k ± 0% -82.98% (p=0.000 n=9+10) Change-Id: I75db393032c328f12d95c39f71c9742c375f207a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	da8def8e13	all: remove old +build tags ... The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	6afe26575c	ipn: make Notify.Prefs be a *ipn.PrefsView ... It is currently a `ipn.PrefsView` which means when we do a JSON roundtrip, we go from an invalid Prefs to a valid one. This makes it a pointer, which fixes the JSON roundtrip. This was introduced in 0957bc5af2. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
David Anderson	76904b82e7	cmd/containerboot: PID1 for running tailscaled in a container. ... This implements the same functionality as the former run.sh, but in Go and with a little better awareness of tailscaled's lifecycle. Also adds TS_AUTH_ONCE, which fixes the unfortunate behavior run.sh had where it would unconditionally try to reauth every time if you gave it an authkey, rather than try to use it only if auth is actually needed. This makes it a bit nicer to deploy these containers in automation, since you don't have to run the container once, then go and edit its definition to remove authkeys. Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Brad Fitzpatrick	d57cba8655	net/tshttpproxy: add clientmetrics on Windows proxy lookup paths ... To collect some data on how widespread this is and whether there's any correlation between different versions of Windows, etc. Updates #4811 Change-Id: I003041d0d7e61d2482acd8155c1a4ed413a2c5c4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	0af57fce4c	cmd/tailscale,ipn: implement lock sign command ... Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Brad Fitzpatrick	a7f7e79245	cmd/tailscale/cli: hide old, useless --host-routes flag ... It was from very early Tailscale and no longer makes sense. Change-Id: I31b4e728789f26b0376ebe73aa1b4bbbb1d62607 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	f4ff26f577	types/pad32: delete package ... Use Go 1.19's new 64-bit alignment ~hidden feature instead. Fixes #5356 Change-Id: Ifcbcb115875a7da01df3bc29e9e7feadce5bc956 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	2be951a582	cmd/tsconnect: fix null pointer dereference when DNS lookups fail ... If we never had a chance to open the SSH session we should not try to close it. Fixes #6089 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Tom DNetto	d98305c537	cmd,ipn/ipnlocal,tailcfg: implement TKA disablement ... * Plumb disablement values through some of the internals of TKA enablement. * Transmit the node's TKA hash at the end of sync so the control plane understands each node's head. * Implement /machine/tka/disable RPC to actuate disablement on the control plane. There is a partner PR for the control server I'll send shortly. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Brad Fitzpatrick	7ad636f5b7	cmd/tailscale/cli: flesh out "tailscale ssh" CLI docs ... Per user feedback. Fixes #5877 Change-Id: Ib70ad57ec2507244fc54745f4e43c0ce13f51e9c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	3336d08d59	cmd/tailscale/cli: make set without args print usage ... Make "tailscale set" by itself be equivalent to "tailscale set -h" rather than just say "you did it wrong" and make people do another -h step. Change-Id: Iad2b2ddb2595c0121d2536de5b78648f3eded3e3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7b6cd4e659	cmd/tailscale/cli: make set's usage match up's, other than defaults ... Fixes #6082 Change-Id: I92dc4726d866dcfd87e93ff09772601851d92ccf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Joe Tsai	b2035a1dca	cmd/netlogfmt: handle any stream of network logs (#6108) ... Make netlogfmt useful regardless of the exact schema of the input. If a JSON object looks like a network log message, then unmarshal it as one and then print it. This allows netlogfmt to support both a stream of JSON objects directly serialized from netlogtype.Message, or the schema returned by the /api/v2/tailnet/{{tailnet}}/network-logs API endpoint. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	c21a3c4733	types/netlogtype: new package for network logging types (#6092) ... The netlog.Message type is useful to depend on from other packages, but doing so would transitively cause gvisor and other large packages to be linked in. Avoid this problem by moving all network logging types to a single package. We also update staticcheck to take in: 003d277bcf Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Maisem Ali	19b5586573	cmd/tailscale/cli: add beginnings of `tailscale set` ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Mihai Parparita	d60f7fe33f	cmd/tsconnect: run wasm-opt on the generated wasm file ... Saves about 1.4MB from the generated wasm file. The Brotli size is basically unchanged (it's actually slightly larger, by 40K), suggesting that most of the size delta is due to not inlining and other changes that were easily compressible. However, it still seems worthwhile to have a smaller final binary, to reduce parse time and increase likelihood that we fit in the browser's disk cache. Actual performance appears to be unchanged. Updates #5142 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Will Norris	bff202a290	cmd/nginx-auth: add experimental status badge to README	2 years ago
Brad Fitzpatrick	35bee36549	portlist: use win32 calls instead of running netstat process [windows] ... Turns out using win32 instead of shelling out to child processes is a bit faster: name old time/op new time/op delta GetListIncremental-4 278ms ± 2% 0ms ± 7% -99.93% (p=0.000 n=8+10) name old alloc/op new alloc/op delta GetListIncremental-4 238kB ± 0% 9kB ± 0% -96.12% (p=0.000 n=10+8) name old allocs/op new allocs/op delta GetListIncremental-4 1.19k ± 0% 0.02k ± 0% -98.49% (p=0.000 n=10+10) Fixes #3876 (sadly) Change-Id: I1195ac5de21a8a8b3cdace5871d263e81aa27e91 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Denton Gentry	dafc822654	cmd/nginx-auth: increment version. ... We need a new release to handle TCD changes after MagicDNS GA Updates https://github.com/tailscale/tailscale/issues/6048 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Maisem Ali	0957bc5af2	ipn/ipnlocal: use ipn.PrefsView ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Mihai Parparita	660abd7309	cmd/tsconnect: add README to generated NPM package ... Makes the landing page at https://www.npmjs.com/package/@tailscale/connect look slightly nicer. Fixes #5976 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	3697609aaa	portlist: remove unix.Readlink allocs on Linux ... name old time/op new time/op delta GetList-8 11.2ms ± 5% 11.1ms ± 3% ~ (p=0.661 n=10+9) name old alloc/op new alloc/op delta GetList-8 83.3kB ± 1% 67.4kB ± 1% -19.05% (p=0.000 n=10+10) name old allocs/op new allocs/op delta GetList-8 2.89k ± 2% 2.19k ± 1% -24.24% (p=0.000 n=10+10) (real issue is we're calling this code as much as we are, but easy enough to make it efficient because it'll still need to be called sometimes in any case) Updates #5958 Change-Id: I90c20278d73e80315a840aed1397d24faa308d93 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	223126fe5b	cmd/derper, net/netcheck: add challenge/response to generate_204 endpoint ... The Lufthansa in-flight wifi generates a synthetic 204 response to the DERP server's /generate_204 endpoint. This PR adds a basic challenge/response to the endpoint; something sufficiently complicated that it's unlikely to be implemented by a captive portal. We can then check for the expected response to verify whether we're being MITM'd. Follow-up to #5601 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I94a68c9a16a7be7290200eea6a549b64f02ff48f	2 years ago
Mihai Parparita	9d04ffc782	net/wsconn: add back custom wrapper for turning a websocket.Conn into a net.Conn ... We removed it in #4806 in favor of the built-in functionality from the nhooyr.io/websocket package. However, it has an issue with deadlines that has not been fixed yet (see nhooyr/websocket#350). Temporarily go back to using a custom wrapper (using the fix from our fork) so that derpers will stop closing connections too aggressively. Updates #5921 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	9475801ebe	ipn/ipnlocal: fix E.G.G. port number accounting ... Change-Id: Id35461fdde79448372271ba54f6e6af586f2304d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	7741e9feb0	cmd/tsconnect: add progress and connection callbacks ... Allows UI to display slightly more fine-grained progress when the SSH connection is being established. Updates tailscale/corp#7186 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	45b7e8c23c	cmd/tailscale: make tailscale cert --serve-demo accept optional listen argument ... Change-Id: I48f2f4f74c9996b9ed4bee02c61f125d42154a34 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Joe Tsai	9116e92718	cmd/netlogfmt: new package to pretty print network traffic logs (#5930) ... This package parses a JSON stream of netlog.Message from os.Stdin and pretty prints the contents as a stream of tables. It supports reverse lookup of tailscale IP addresses if given an API key and the tailnet that these traffic logs belong to. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Denton Gentry	19dfdeb1bb	cmd/tailscale: correct --cpu-profile help text ... Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Andrew Dunham	c32f9f5865	cmd/tailscale, ipn: enable debug logs when --report flag is passed to bugreport (#5830) ... Change-Id: Id22e9f4a2dcf35cecb9cd19dd844389e38c922ec Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Mihai Parparita	63ad49890f	cmd/tsconnect: pre-compress main.wasm when building the NPM package ... This way we can do that once (out of band, in the GitHub action), instead of increasing the time of each deploy that uses the package. .wasm is removed from the list of automatically pre-compressed extensions, an OSS bump and small change on the corp side is needed to make use of this change. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Joe Tsai	f9120eee57	wgengine: start network logger in Userspace.Reconfig (#5908) ... If the wgcfg.Config is specified with network logging arguments, then Userspace.Reconfig starts up an asynchronous network logger, which is shutdown either upon Userspace.Close or when Userspace.Reconfig is called again without network logging or route arguments. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Mihai Parparita	b49eb7d55c	cmd/tsconnect: move NPM package to being under the @tailscale org ... Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	e24de8a617	ssh/tailssh: add password-forcing workaround for buggy SSH clients ... If the username includes a suffix of +password, then we accept password auth and just let them in like it were no auth. This exists purely for SSH clients that get confused by seeing success to their initial auth type "none". Co-authored-by: Maisem Ali <maisem@tailscale.com> Change-Id: I616d4c64d042449fb164f615012f3bae246e91ec Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Anton Tolchanov	c070d39287	cmd/tailscaled: handle tailscaled symlink on macOS ... When Tailscale is installed via Homebrew, `/usr/local/bin/tailscaled` is a symlink to the actual binary. Now when `tailscaled install-system-daemon` runs, it will not attempt to overwrite that symlink if it already points to the tailscaled binary. However, if executed binary and the link target differ, the path will he overwritten - this can happen when a user decides to replace Homebrew-installed tailscaled with a one compiled from source code. Fixes #5353 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	2 years ago
Emmanuel T Odeke	680f8d9793	all: fix more resource leaks found by staticmajor ... Updates #5706 Signed-off-by: Emmanuel T Odeke <emmanuel@orijtech.com>	2 years ago
Brad Fitzpatrick	0475ed4a7e	cmd/ssh-auth-none-demo: put the hostname in the package doc ... 188.166.70.128 port 2222 for now. Some hostname later maybe. Change-Id: I9c329410035221ed6cdff7a482727d30b77eea8b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	7df85c6031	cmd/ssh-auth-none-demo: add banner as part of the demo ... Send two banners with a second in between, this demonstrates the case where all banners are shown after auth completes and not during. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	8a187159b2	cmd/ssh-auth-none-demo: add demo SSH server that acts like Tailscale SSH ... For SSH client authors to fix their clients without setting up Tailscale stuff. Change-Id: I8c7049398512de6cb91c13716d4dcebed4d47b9c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	92ad56ddcb	cmd/tsconnect: close the SSH session an unload event instead of beforeunload ... The window may not end up getting unloaded (if other beforeunload handlers prevent the event), thus we should only close the SSH session if it's truly getting unloaded. Updates tailscale/corp#7304 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Joe Tsai	24ebf161e8	net/tstun: instrument Wrapper with statistics gathering (#5847) ... If Wrapper.StatisticsEnable is enabled, then per-connection counters are maintained. If enabled, Wrapper.StatisticsExtract must be periodically called otherwise there is unbounded memory growth. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
David Anderson	fde20f3403	cmd/pgproxy: link to blog post at the top. ... Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Mihai Parparita	7ffd2fe005	cmd/tsconnect: switch to non-beta versions of xterm and related packages ... xterm 5.0 was released a few weeks ago, and it picks up xtermjs/xterm.js#4069, which was the main reason why we were on a 5.0 beta. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
David Anderson	bdf3d2a63f	cmd/pgproxy: open-source our postgres TLS-enforcing proxy. ... From the original commit that implemented it: It accepts Postgres connections over Tailscale only, dials out to the configured upstream database with TLS (using strong settings, not the swiss cheese that postgres defaults to), and proxies the client through. It also keeps an audit log of the sessions it passed through, along with the Tailscale-provided machine and user identity of the connecting client. In our other repo, this was: commit 92e5edf98e8c2be362f564a408939a5fc3f8c539, Change-Id I742959faaa9c7c302bc312c7dc0d3327e677dc28. Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Brad Fitzpatrick	1841d0bf98	wgengine/magicsock: make debug-level stuff not logged by default ... And add a CLI/localapi and c2n mechanism to enable it for a fixed amount of time. Updates #1548 Change-Id: I71674aaf959a9c6761ff33bbf4a417ffd42195a7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	5c69961a57	cmd/tailscale/cli: add --record flag to bugreport (#5826) ... Change-Id: I02bdc37a5c1a5a5d030c136ec5e84eb4c9ab1752 Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Andrew Dunham	e5636997c5	wgengine: don't re-allocate trimmedNodes map (#5825) ... Change-Id: I512945b662ba952c47309d3bf8a1b243e05a4736 Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Mihai Parparita	8343b243e7	all: consistently initialize Logf when creating tsdial.Dialers ... Most visible when using tsnet.Server, but could have resulted in dropped messages in a few other places too. Fixes #5743 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes ... Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Adrian Dewhurst	c581ce7b00	cmd/tailscale, client, ipn, tailcfg: add network lock modify command ... Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	2 years ago
Aaron Klotz	44f13d32d7	cmd/tailscaled, util/winutil: log Windows service diagnostics when the wintun device fails to install ... I added new functions to winutil to obtain the state of a service and all its depedencies, serialize them to JSON, and write them to a Logf. When tstun.New returns a wrapped ERROR_DEVICE_NOT_AVAILABLE, we know that wintun installation failed. We then log the service graph rooted at "NetSetupSvc". We are interested in that specific service because network devices will not install if that service is not running. Updates https://github.com/tailscale/tailscale/issues/5531 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	2 years ago
Emmanuel T Odeke	f981b1d9da	all: fix resource leaks with missing .Close() calls ... Fixes #5706 Signed-off-by: Emmanuel T Odeke <emmanuel@orijtech.com>	2 years ago
Brad Fitzpatrick	9bdf0cd8cd	ipn/ipnlocal: add c2n /debug/{goroutines,prefs,metrics} ... * and move goroutine scrubbing code to its own package for reuse * bump capver to 45 Change-Id: I9b4dfa5af44d2ecada6cc044cd1b5674ee427575 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	b1867457a6	doctor: add package for running in-depth healthchecks; use in bugreport (#5413) ... Change-Id: Iaa4e5b021a545447f319cfe8b3da2bd3e5e5782b Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
James Tucker	f7cb535693	net/speedtest: retune to meet iperf on localhost in a VM ... - removed some in-flow time calls - increase buffer size to 2MB to overcome syscall cost - move relative time computation from record to report time Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Andrew Dunham	e1bdbfe710	tailcfg, control/controlhttp, control/controlclient: add ControlDialPlan field (#5648) ... * tailcfg, control/controlhttp, control/controlclient: add ControlDialPlan field This field allows the control server to provide explicit information about how to connect to it; useful if the client's link status can change after the initial connection, or if the DNS settings pushed by the control server break future connections. Change-Id: I720afe6289ec27d40a41b3dcb310ec45bd7e5f3e Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Brad Fitzpatrick	2c447de6cc	cmd/tailscaled: use explicit equal sign in --port=$PORT in tailscaled.service ... Personal preference (so it's obvious it's not a bool flag), but it also matches the --state= before it. Bonus: stop allowing PORT to sneak in extra flags to be passed as their own arguments, as $FOO and ${FOO} expand differently. (${FOO} is required to concat to strings) Change-Id: I994626a5663fe0948116b46a971e5eb2c4023216 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	a7a0baf6b9	cmd/tsconnect: add error callback for SSH sessions ... We were just logging them to the console, which is useful for debugging, but we may want to show them in the UI too. Updates tailscale/corp#6939 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Tom DNetto	e9b98dd2e1	control/controlclient,ipn/ipnlocal: wire tka enable/disable ... Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Andrew Dunham	c6162c2a94	net/netcheck: add check for captive portal (#5593) ... This doesn't change any behaviour for now, other than maybe running a full netcheck more often. The intent is to start gathering data on captive portals, and additionally, seeing this in the 'tailscale netcheck' command should provide a bit of additional information to users. Updates #1634 Change-Id: I6ba08f9c584dc0200619fa97f9fde1a319f25c76 Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Berk D. Demir	ff13c66f55	cmd/tailscale: fix configure-host command for Synology ... d5e7e309 changed the `hostinfo.GetVersion` from distro and distro version to UTS Name Release and moved distribution information under `hostinfo.Distro*`. `tailscale configure-host` command implementation for Synology DSM environments relies on the old semantics of this string for matching DSM Major version so it's been broken for a few days. Pull in `hostinfo` and prefix match `hostinfo.DistroVersion` to match DSM major version. Signed-off-by: Berk D. Demir <bdd@mindcast.org>	2 years ago
Brad Fitzpatrick	ed248b04a7	cmd/tailscale: remove leftover debug prints from earlier commit ... From 6632504f45 Change-Id: If21789232b3ecc14c1639cf87814af6fa73f535f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	8158dd2edc	cmd/tsconnect: allow SSH connection timeout to be overridden ... 5 seconds may not be enough if we're still loading the derp map and connecting to a slow machine. Updates #5693 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Maisem Ali	6632504f45	cmd/tailscale/cli: [up] move lose-ssh check after other validations ... The check was happening too early and in the case of error would wait 5 s and then error out. This makes it so that it does validations before the SSH check. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	41bb47de0e	cmd/tailscaled: respect $PORT on all platforms, not just Linux ... Updates #5114 Change-Id: I6c6e28c493d6a026a03088157d08f9fd182ef373 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	3562b5bdfa	envknob, health: support Synology, show parse errors in status ... Updates #5114 Change-Id: I8ac7a22a511f5a7d0dcb8cac470d4a403aa8c817 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	65c24b6334	envknob: generalize Windows tailscaled-env.txt support ... ipnserver previously had support for a Windows-only environment variable mechanism that further only worked when Windows was running as a service, not from a console. But we want it to work from tailscaed too, and we want it to work on macOS and Synology. So move it to envknob, now that envknob can change values at runtime post-init. A future change will wire this up for more platforms, and do something more for CLI flags like --port, which the bug was originally about. Updates #5114 Change-Id: I9fd69a9a91bb0f308fc264d4a6c33e0cbe352d71 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	9b71008ef2	control/controlhttp: move Dial options into options struct (#5661) ... This turns 'dialParams' into something more like net.Dialer, where configuration fields are public on the struct. Split out of #5648 Change-Id: I0c56fd151dc5489c3c94fb40d18fd639e06473bc Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Eng Zer Jun	f0347e841f	refactor: move from io/ioutil to io and os packages ... The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit replaces the existing io/ioutil functions with their new definitions in io and os packages. Reference: https://golang.org/doc/go1.16#ioutil Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>	2 years ago
Mihai Parparita	1ce0e558a7	cmd/derper, control/controlhttp: disable WebSocket compression ... The data that we send over WebSockets is encrypted and thus not compressible. Additionally, Safari has a broken implementation of compression (see nhooyr/websocket#218) that makes enabling it actively harmful. Fixes tailscale/corp#6943 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	74674b110d	envknob: support changing envknobs post-init ... Updates #5114 Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	9c6bdae556	cmd/tsconnect: use the parent window for `beforeunload` event listener ... The SSH session may be rendered in a different window that the one that is executing the script. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	45a3de14a6	cmd/tailscaled, tailcfg, hostinfo: add flag to disable logging + support ... As noted in #5617, our documented method of blocking log.tailscale.io DNS no longer works due to bootstrap DNS. Instead, provide an explicit flag (--no-logs-no-support) and/or env variable (TS_NO_LOGS_NO_SUPPORT=true) to explicitly disable logcatcher uploads. It also sets a bit on Hostinfo to say that the node is in that mode so we can end any support tickets from such nodes more quickly. This does not yet provide an easy mechanism for users on some platforms (such as Windows, macOS, Synology) to set flags/env. On Linux you'd used /etc/default/tailscaled typically. Making it easier to set flags for other platforms is tracked in #5114. Fixes #5617 Fixes tailscale/corp#1475 Change-Id: I72404e1789f9e56ec47f9b7021b44c025f7a373a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	b22b565947	cmd/tsconnect: allow xterm.js terminal options to be passed in ... Allows clients to use a custom theme and other xterm.js customization options. Fixes #5610 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	c312e0d264	cmd/tsconnect: allow hostname to be specified ... The auto-generated hostname is nice as a default, but there are cases where the client has a more specific name that it can generate. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	11fcc3a7b0	cmd/tsconnect: fix xterm.js link opening not working when rendered into another window ... The default WebLinksAddon handler uses window.open(), but that gets blocked by the popup blocker when the event being handled is another window. We instead need to invoke open() on the window that the event was triggered in. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Will Norris	f03a63910d	cmd/tailscale: add licenses link to web UI ... The `tailscale web` UI is the primary interface for Synology and Home Assistant users (and perhaps others), so is the logical place to put our open source license notices. I don't love adding things to what is currently a very minimal UI, but I'm not sure of a better option. Updates tailscale/corp#5780 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Andrew Dunham	eb5939289c	cmd/derper: add /generate_204 endpoint (#5601) ... For captive portal detection. Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Mihai Parparita	b302742137	cmd/tsconnect: enable web links addon in the terminal ... More user friendly, and as a side-effect we handle SSH check mode better, since the URL that's output is now clickable. Fixes #5247 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	62035d6485	cmd/tsconnect: switch back to public version of xterm npm package ... xtermjs/xterm.js#4069 was merged and published (in 5.0.0-beta.58), no need for the fork added by 01e6565e8a. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	89fee056d3	cmd/derper: add robots.txt to disallow all ... Fixes #5565 Change-Id: I5626ec2116d9be451caef651dc301b7a82e35550 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	58abae1f83	net/dns/{publicdns,resolver}: add NextDNS DoH support ... NextDNS is unique in that users create accounts and then get user-specific DNS IPs & DoH URLs. For DoH, the customer ID is in the URL path. For IPv6, the IP address includes the customer ID in the lower bits. For IPv4, there's a fragile "IP linking" mechanism to associate your public IPv4 with an assigned NextDNS IPv4 and that tuple maps to your customer ID. We don't use the IP linking mechanism. Instead, NextDNS is DoH-only. Which means using NextDNS necessarily shunts all DNS traffic through 100.100.100.100 (programming the OS to use 100.100.100.100 as the global resolver) because operating systems can't usually do DoH themselves. Once it's in Tailscale's DoH client, we then connect out to the known NextDNS IPv4/IPv6 anycast addresses. If the control plane sends the client a NextDNS IPv6 address, we then map it to the corresponding NextDNS DoH with the same client ID, and we dial that DoH server using the combination of v4/v6 anycast IPs. Updates #2452 Change-Id: I3439d798d21d5fc9df5a2701839910f5bef85463 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	01e6565e8a	cmd/tsconnect: temporarily switch to xterm.js fork that handles popup windows ... Allows other work to be unblocked while xtermjs/xterm.js#4069 is worked through. To enable testing the popup window handling, the standalone app allows opening of SSH sessions in new windows by holding down the alt key while pressing the SSH button. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	2400ba28b1	cmd/tsconnect: handle terminal resizes before the SSH session is created ... Store the requested size is a struct field, and use that when actually creating the SSH session. Fixes #5567 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Andrew Dunham	c9961b8b95	cmd/derper: filter out useless HTTP error logs (#5563) ... These errors aren't actionable and just fill up logs with useless data. See the following Go issue for more details: https://golang.org/issue/26918 Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Mihai Parparita	2f702b150e	cmd/tsconnect: add dev-pkg command for two-sided development ... Allows imports of the NPM package added by 1a093ef482 to be replaced with import("http://localhost:9090/pkg/pkg.js"), so that changes can be made in parallel to both the module and code that uses it (without any need for NPM publishing or even building of the package). Updates #5415 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	02de34fb10	cmd/derper: add flag to run derper in bootstrap-dns-only mode ... Change-Id: Iba128e94464afa605bc9df1f06a91d296380eed0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	a0bae4dac8	cmd/derper: add support for unpublished bootstrap DNS entries (#5529) ... Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Brad Fitzpatrick	ba3cc08b62	cmd/tailscale/cli: add backwards compatibility 'up' processing for legacy client ... Updates tailscale/corp#6781 Change-Id: I843fc810cbec0140d423d65db81e90179d6e0fa5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Bertrand Lorentz	a5ad57472a	cli/cert: Fix help message for --key-file ... Signed-off-by: Bertrand Lorentz <bertrand.lorentz@gmail.com>	2 years ago
Xe Iaso	3564fd61b5	cmd/gitops-pusher: standardize hujson before posting to validate (#5525) ... Apparently the validate route doesn't check content-types or handle hujson with comments correctly. This patch makes gitops-pusher convert the hujson to normal json. Signed-off-by: Xe <xe@tailscale.com> Signed-off-by: Xe <xe@tailscale.com>	2 years ago
nyghtowl	cfbbcf6d07	cmd/nginx-auth/nginx-auth: update auth to allow for new domains ... With MagicDNS GA, we are giving every tailnet a tailnet-<hex>.ts.net name. We will only parse out if legacy domains include beta.tailscale.net; otherwise, set tailnet to the full domain format going forward. Signed-off-by: nyghtowl <warrick@tailscale.com>	2 years ago
Andrew Dunham	c72caa6672	wgengine/magicsock: use AF_PACKET socket + BPF to read disco messages ... This is entirely optional (i.e. failing in this code is non-fatal) and only enabled on Linux for now. Additionally, this new behaviour can be disabled by setting the TS_DEBUG_DISABLE_AF_PACKET environment variable. Updates #3824 Replaces #5474 Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Mihai Parparita	58f35261d0	cmd/tsconnect: remove debugging code ... Remove test prefix added to validate the error code from 27f36f77c3. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago