tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	7c1d6e35a5	all: use Go 1.22 range-over-int Updates #11058 Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Brad Fitzpatrick	952e06aa46	wgengine/router: don't attempt route cleanup on Synology Trying to run iptables/nftables on Synology pauses for minutes with lots of errors and ultimately does nothing as it's not used and we lack permissions. This fixes a regression from `db760d0bac` (#11601) that landed between Synology testing on unstable 1.63.110 and 1.64.0 being cut. Fixes #11737 Change-Id: Iaf9563363b8e45319a9b6fe94c8d5ffaecc9ccef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
James Tucker	db760d0bac	cmd/tailscaled: move cleanup to an implicit action during startup This removes a potentially increased boot delay for certain boot topologies where they block on ExecStartPre that may have socket activation dependencies on other system services (such as systemd-resolved and NetworkManager). Also rename cleanup to clean up in affected/immediately nearby places per code review commentary. Fixes #11599 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Maisem Ali	3f4c5daa15	wgengine/netstack: remove SubnetRouterWrapper It was used when we only supported subnet routers on linux and would nil out the SubnetRoutes slice as no other router worked with it, but now we support subnet routers on ~all platforms. The field it was setting to nil is now only used for network logging and nowhere else, so keep the field but drop the SubnetRouterWrapper as it's not useful. Updates #cleanup Change-Id: Id03f9b6ec33e47ad643e7b66e07911945f25db79 Signed-off-by: Maisem Ali <maisem@tailscale.com>	8 months ago
Joonas Kuorilehto	fe0cfec4ad	wgengine/router: enable ip forwarding on gokrazy Only on Gokrazy, set sysctls to enable IP forwarding so subnet routing and advertised exit node works. Fixes #11405 Signed-off-by: Joonas Kuorilehto <joneskoo@derbian.fi>	8 months ago
Irbe Krumina	5fb721d4ad	util/linuxfw,wgengine/router: skip IPv6 firewall configuration in partial iptables mode (#11546 ) We have hosts that support IPv6, but not IPv6 firewall configuration in iptables mode. We also have hosts that have some support for IPv6 firewall configuration in iptables mode, but do not have iptables filter table. We should: - configure ip rules for all hosts that support IPv6 - only configure firewall rules in iptables mode if the host has iptables filter table. Updates tailscale/tailscale#11540 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
James Tucker	3f7313dbdb	util/linuxfw,wgengine/router: enable IPv6 configuration when netfilter is disabled Updates #11434 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Jason Barnett	4d668416b8	wgengine/router: fix ip rule restoration Fixes #10857 Signed-off-by: Jason Barnett <J@sonBarnett.com>	10 months ago
Aaron Klotz	f7acbefbbb	wgengine/router: make the Windows ifconfig implementation reuse existing MibIPforwardRow2 when possible Looking at profiles, we spend a lot of time in winipcfg.LUID.DeleteRoute looking up the routing table entry for the provided RouteData. But we already have the row! We previously obtained that data via the full table dump we did in getInterfaceRoutes. We can make this a lot faster by hanging onto a reference to the wipipcfg.MibIPforwardRow2 and executing the delete operation directly on that. Fixes #11123 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	10 months ago
Joe Tsai	94a4f701c2	all: use reflect.TypeFor now available in Go 1.22 (#11078 ) Updates #cleanup Signed-off-by: Joe Tsai <joetsai@digital-static.net>	10 months ago
Andrew Dunham	6540d1f018	wgengine/router: look up absolute path to netsh.exe on Windows This is in response to logs from a customer that show that we're unable to run netsh due to the following error: router: firewall: adding Tailscale-Process rule to allow UDP for "C:\\Program Files\\Tailscale\\tailscaled.exe" ... router: firewall: error adding Tailscale-Process rule: exec: "netsh": cannot run executable found relative to current directory: There's approximately no reason to ever dynamically look up the path of a system utility like netsh.exe, so instead let's first look for it in the System32 directory and only if that fails fall back to the previous behaviour. Updates #10804 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I68cfeb4cab091c79ccff3187d35f50359a690573	11 months ago
Andrew Lytvynov	2716250ee8	all: cleanup unused code, part 2 (#10670 ) And enable U1000 check in staticcheck. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Andrew Lytvynov	1302bd1181	all: cleanup unused code, part 1 (#10661 ) Run `staticcheck` with `U1000` to find unused code. This cleans up about a half of it. I'll do the other half separately to keep PRs manageable. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	12 months ago
Naman Sood	97f84200ac	wgengine/router: implement UpdateMagicsockPort for CallbackRouter (#10494 ) Updates #9084. Signed-off-by: Naman Sood <mail@nsood.in>	12 months ago
Naman Sood	d46a4eced5	util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux (#10370 ) * util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux Updates #9084. Currently, we have to tell users to manually open UDP ports on Linux when certain firewalls (like ufw) are enabled. This change automates the process of adding and updating those firewall rules as magicsock changes what port it listens on. Signed-off-by: Naman Sood <mail@nsood.in>	1 year ago
Naman Sood	0a59754eda	linuxfw,wgengine/route,ipn: add c2n and nodeattrs to control linux netfilter Updates tailscale/corp#14029. Signed-off-by: Naman Sood <mail@nsood.in>	1 year ago
James Tucker	215f657a5e	wgengine/router: create netfilter runner in setNetfilterMode This will enable the runner to be replaced as a configuration side effect in a later change. Updates tailscale/corp#14029 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Maisem Ali	fbfee6a8c0	cmd/containerboot: use linuxfw.NetfilterRunner This migrates containerboot to reuse the NetfilterRunner used by tailscaled instead of manipulating iptables rule itself. This has the added advantage of now working with nftables and we can potentially drop the `iptables` command from the container image in the future. Updates #9310 Co-authored-by: Irbe Krumina <irbe@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	05a1f5bf71	util/linuxfw: move detection logic Just a refactor to consolidate the firewall detection logic in a single package so that it can be reused in a later commit by containerboot. Updates #9310 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	5f5c9142cc	util/slicesx: add EqualSameNil, like slices.Equal but same nilness Then use it in tailcfg which had it duplicated a couple times. I think we have it a few other places too. And use slices.Equal in wgengine/router too. (found while looking for callers) Updates #cleanup Change-Id: If5350eee9b3ef071882a3db29a305081e4cd9d23 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Val	c608660d12	wgengine,net,ipn,disco: split up and define different types of MTU Prepare for path MTU discovery by splitting up the concept of DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of underlying network interfaces, minimum "safe" TUN MTU, user configured TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set of likely MTUs to probe. Updates #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Val	6cc5b272d8	Revert "wgengine,net,ipn,disco: split up and define different types of MTU" This reverts commit `059051c58a`. Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Val	059051c58a	wgengine,net,ipn,disco: split up and define different types of MTU Prepare for path MTU discovery by splitting up the concept of DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of underlying network interfaces, minimum "safe" TUN MTU, user configured TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set of likely MTUs to probe. Updates #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Brad Fitzpatrick	dc7aa98b76	all: use set.Set consistently instead of map[T]struct{} I didn't clean up the more idiomatic map[T]bool with true values, at least yet. I just converted the relatively awkward struct{}-valued maps. Updates #cleanup Change-Id: I758abebd2bb1f64bc7a9d0f25c32298f4679c14f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
KevinLiang10	93cab56277	wgengine/router: fall back and set iptables as default again Due to the conflict between our nftables implementation and ufw, which is a common utility used on linux. We now want to take a step back to prevent regression. This will give us more chance to let users to test our nftables support and heuristic. Updates: #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
Brad Fitzpatrick	e8551d6b40	all: use Go 1.21 slices, maps instead of x/exp/{slices,maps} Updates #8419 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
KevinLiang10	7ed3681cbe	tailcfg: Add FirewallMode to NetInfo to record wether host using iptables or nftables To record wether user is using iptables or nftables after we add support to nftables on linux, we are adding a field FirewallMode to NetInfo in HostInfo to reflect what firewall mode the host is running, and form metrics. The information is gained from a global constant in hostinfo.go. We set it when selection heuristic made the decision, and magicsock reports this to control. Updates: tailscale/corp#13943 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
Brad Fitzpatrick	25a8daf405	wgengine/router: always use nftables mode on gokrazy Updates gokrazy/gokrazy#209 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
KevinLiang10	411e3364a9	wgengine/router: use iptablesRunner when no firewall tool is available: The current router errors out when neither iptables nor nftables support is present. We should fall back to the previous behaviour which we creates a dummy iptablesRunner. Fixes: #8878 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
KevinLiang10	ae63c51ff1	wgengine/router: add auto selection heuristic for iptables/nftables This commit replaces the TS_DEBUG_USE_NETLINK_NFTABLES envknob with a TS_DEBUG_FIREWALL_MODE that should be set to either 'iptables' or 'nftables' to select firewall mode manually, other wise tailscaled will automatically choose between iptables and nftables depending on environment and system availability. updates: #319 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
David Anderson	52212f4323	all: update exp/slices and fix call sites slices.SortFunc suffered a late-in-cycle API breakage. Updates #cleanup Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
KevinLiang10	a3c7b21cd1	util/linuxfw: add nftables support This commit adds nftable rule injection for tailscaled. If tailscaled is started with envknob TS_DEBUG_USE_NETLINK_NFTABLES = true, the router will use nftables to manage firewall rules. Updates: #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
Val	1138f4eb5f	wgengine/router,ipn/ipnlocal: add MTU field to router config The MacOS client can't set the MTU when creating the tun due to lack of permissions, so add it to the router config and have MacOS set it in the callback using a method that it does have permissions for. Updates #8219 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
KevinLiang10	243ce6ccc1	util/linuxfw: decoupling IPTables logic from linux router This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner. For #391 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
Brad Fitzpatrick	a874f1afd8	all: adjust case of "IPv4" and "IPv6" Updates #docs Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Mihai Parparita	4722f7e322	all: move network monitoring from wgengine/monitor to net/netmon We're using it in more and more places, and it's not really specific to our use of Wireguard (and does more just link/interface monitoring). Also removes the separate interface we had for it in sockstats -- it's a small enough package (we already pull in all of its dependencies via other paths) that it's not worth the extra complexity. Updates #7621 Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
James Tucker	40fa2a420c	envknob,net/tstun,wgengine: use TS_DEBUG_MTU consistently Noted on #5915 TS_DEBUG_MTU was not used consistently everywhere. Extract the default into a function that can apply this centrally and use it everywhere. Added envknob.Lookup{Int,Uint}Sized to make it easier to keep CodeQL happy when using converted values. Updates #5915 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	7b73c9628d	version/distro,wgengine/router: raise WSL eth0 MTU when too low WSL has started to set the eth0 default route interface default to 1280 MTU, which is too low to carry 1280 byte packets from tailscale0 once wrapped in WireGuard. The change down to 1280 is very likely smaller than necessary for almost all users. We can not easily determine the ideal MTU, but if all the preconditions match, we raise the MTU to 1360, which is just enough for Tailscale traffic to work. Updates #4833 Updates #7346 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Jordan Whited	ea5ee6f87c	all: update golang.zx2c4.com/wireguard to github.com/tailscale/wireguard-go (#6692 ) This is temporary while we work to upstream performance work in https://github.com/WireGuard/wireguard-go/pull/64. A replace directive is less ideal as it breaks dependent code without duplication of the directive. Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Andrew Dunham	b63094431b	wgengine/router: fix tests on systems with older Busybox 'ip' binary Adjust the expected system output by removing the unsupported mask component including and after the slash in expected output like: fwmask 0xabc/0xdef This package's tests now pass in an Alpine container when the 'go' and 'iptables' packages are installed (and run as privileged so /dev/net/tun exists). Fixes #5928 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Id1a3896282bfa36b64afaec7a47205e63ad88542	2 years ago
Aaron Klotz	033bd94d4c	cmd/tailscaled, wgengine/router: use wingoes/com for COM initialization instead of go-ole This patch removes the crappy, half-backed COM initialization used by `go-ole` and replaces that with the `StartRuntime` function from `wingoes`, a library I have started which, among other things, initializes COM properly. In particular, we should always be initializing COM to use the multithreaded apartment. Every single OS thread in the process becomes implicitly initialized as part of the MTA, so we do not need to concern ourselves as to whether or not any particular OS thread has initialized COM. Furthermore, we no longer need to lock the OS thread when calling methods on COM interfaces. Single-threaded apartments are designed solely for working with Win32 threads that have a message pump; any other use of the STA is invalid. Fixes https://github.com/tailscale/tailscale/issues/3137 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	2 years ago
Brad Fitzpatrick	3f8e185003	health: add Warnable, move ownership of warnable items to callers The health package was turning into a rando dumping ground. Make a new Warnable type instead that callers can request an instance of, and then Set it locally in their code without the health package being aware of all the things that are warnable. (For plenty of things the health package will want to know details of how Tailscale works so it can better prioritize/suppress errors, but lots of the warnings are pretty leaf-y and unrelated) This just moves two of the health warnings. Can probably move more later. Change-Id: I51e50e46eb633f4e96ced503d3b18a1891de1452 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	d585cbf02a	wgengine/router: [bsd/darwin] remove and readd routes on profile change Noticed when testing FUS on tailscale-on-macOS, that routing would break completely when switching between profiles. However, it would start working again when going back to the original profile tailscaled started with. Turns out that if we change the addrs on the interface we need to remove and readd all the routes. Updates #713 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	da8def8e13	all: remove old +build tags The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	74637f2c15	wgengine/router: [linux] add before deleting interface addrs Deleting may temporarily result in no addrs on the interface, which results in all other rules (like routes) to get dropped by the OS. I verified this fixes the problem. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
James Tucker	4ec6d41682	wgengine/router: fix MTU configuration on Windows Always set the MTU to the Tailscale default MTU. In practice we are missing applying an MTU for IPv6 on Windows prior to this patch. This is the simplest patch to fix the problem, the code in here needs some more refactoring. Fixes #5914 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Tom DNetto	ab591906c8	wgengine/router: Increase range of rule priorities when detecting mwan3 Context: https://github.com/tailscale/tailscale/pull/5588#issuecomment-1260655929 It seems that if the interface at index 1 is down, the rule is not installed. As such, we increase the range we detect up to 2004 in the hope that at least one of the interfaces 1-4 will be up. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Eng Zer Jun	f0347e841f	refactor: move from io/ioutil to io and os packages The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit replaces the existing io/ioutil functions with their new definitions in io and os packages. Reference: https://golang.org/doc/go1.16#ioutil Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>	2 years ago

1 2 3 4 5

249 Commits (454a03a766af20f814e50ab5dcc523120e828403)